Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Homogenization models are widely used to predict the evolution of texture (crystal preferred orientations) and resulting anisotropy of physical properties in metals, rocks, and ice. They fail, however, in predicting two main features of texture evolution in simple shear (the dominant deformation regime on Earth) for highly anisotropic crystals, like olivine: (1) the fast rotation of the CPO towards a stable position characterized by parallelism of the dominant slip system and the macroscopic shear and (2) the asymptotical evolution towards a constant intensity. To better predict CPO-induced anisotropy in the mantle, but limiting computational costs and use of poorly-constrained physical parameters, we modified a viscoplastic self-consistent code to simulate the effects of subgrain rotation recrystallization. To each crystal is associated a finite number of fragments (possible subgrains). Formation of a subgrain corresponds to introduction of a disorientation (relative to the parent) and resetting of the fragment strain and internal energy. The probability of formation of a subgrain is controlled by comparison between the local internal energy and the average value in the polycrystal. A two-level mechanical interaction scheme is applied for simulating the intracrystalline strain heterogeneity allowed by the formation of low-angle grain boundaries. Within a crystal, interactions between subgrains follow a constant stress scheme. The interactions between grains are simulated by a tangent viscoplastic self-consistent approach. This two-level approach better reproduces the evolution of olivine CPO in simple shear in experiments and nature. It also predicts a marked weakening at low shear strains, consistently with experimental data.
ISSN: 0012-821X

hal-01243503
https://hal.archives-ouvertes.fr/hal-01243503
DOI : 10.1016/j.epsl.2015.08.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : The depth of the oceanic lithosphere–asthenosphere boundary (LAB), as inferred from shear wave velocities, increases with lithospheric age, in agreement with models of cooling oceanic lithosphere. On the other hand, the distribution of radial anisotropy under oceanic plates is almost age-independent. In particular, radial anisotropy shows a maximum positive gradient at a depth of ∼70 km, which, if used as a proxy, indicates an age-independent LAB depth. These contrasting observations have fueled a controversy on the seismological signature of the LAB. To better understand the discrepancy between these observations, we model the development of lattice preferred orientation (LPO) in upper mantle crystal aggregates and predict the seismic anisotropy produced by plate-driven mid-ocean ridge flows. The model accounts for the progressive cooling of the lithosphere with age and can incorporate both diffusion and dislocation creep deformation mechanisms. We find that an age-independent distribution of radial anisotropy is the natural consequence of these simple flows. The depth and strength of anisotropy is further controlled by the deformation regime – dislocation or diffusion creep – experienced by crystals during their ascent towards, and subsequent motion away from, the ridge axis. Comparison to surface wave tomography models yield constraints on rheological parameters such as the activation volume. Although not excluded, additional mechanisms proposed to explain some geophysical signatures of the LAB, such as the presence of partial melt or changes in water content, are not required to explain the radial anisotropy proxy. Our prediction, that the age-independent radial anisotropy proxy marks the transition to flow-induced asthenospheric anisotropy, provides a way to reconcile thermal, mechanical and seismological views of the LAB.
ISSN: 0012-821X

hal-01553243
https://hal.archives-ouvertes.fr/hal-01553243
DOI : 10.1016/j.epsl.2016.12.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
TEM Study of Heavitree quartzite deformed at high temperatures and a pressure of 1.5 GPa with three different preparations: water-added, vacuum dried, and sodium doped show a wide range of dislocation microstructure. The vacuum dried sample has a very heterogeneous dislocation distribution varying from almost no dislocations to very high densities. Dislocation nucleation occurs by cross-slip mechanisms, such as Frank-Read sources and Orowan loops around hard inclusions. Shear bands develop in the basal plane composed of two closely spaced shear planes. Dislocations have straight segments and they are aligned along directions of dense packing, suggesting strong Peierls stress control due to the crystal structure. No voids, bubbles or dislocation walls where observed in the vacuum dried sample. The sodium-doped sample had a homogeneous high dislocation density. The water-added sample has a significantly lower, relatively uniform dislocation density. Bubbles associated with dislocations are seen in every grain. Dislocations were either present in loops around bubbles or as straight dislocations with small bubbles spaced along the dislocation line. Some of the long straight dislocations are aligned parallel to the c-axis. Sub-grains where very frequent, sometimes form cells of about 2 p,m in diameter with straight edges. Analysis of dislocations show 1/3 < a > and [c] dislocations in sub-grain walls and free 1/3 < a > dislocations on prism planes. There is clear evidence for dislocation climb with sub-grain walls, dislocation cells, dislocation junctions and dislocation debris of small loops. The major difference between vacuum dried and water-added samples are the homogeneity of the microstructure and evidence for climb in the water-added sample. Glide is clearly difficult, with a high Peierls stress in the vacuum dried sample as shown by areas of very low and very high dislocation density and the crystallographic control of dislocation line direction. The sodium-doped sample indicates that nucleation was easy by the high homogenous dislocation density, but no climb recovery has taken place. The density is high and the dislocations are strongly interacting causing tangles; no evidence for crystallographic control can be observed at these levels of strain. The activation energy for creep in Heavitree quartzite decreases with inferred water content of the specimens form 185 kJ mol(-1) for vacuum dried to 151 for 0.4 wt% water-added samples. Analysis of diffusion data for oxygen under hydrothermal conditions and inferred diffusion data for the hydrogarnet defect and dislocation velocity suggests activation energies for these processes are similar to the activation energy for the dislocation creep of Heavitree quartzite and other quartz aggregates. For data from the previously published experiments with the highest stress resolution there is a correlation between the A pre-factor in the power law creep equation and the activation energy for creep. It is speculated that the correlation may be due to variable hydrogarnet defect concentrations.
ISSN: 0031-9201

hal-00413112
https://hal.archives-ouvertes.fr/hal-00413112
DOI : 10.1016/j.pepi.2008.07.009

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Lithosphere-scale analogue models were employed to display that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since middle Miocene but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since middle Miocene. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated around 10 Ma after the onset of Anatolia escape. The displacement field at the surface of the model allows the identification of sub-domains, which result from strain partitioning instead of being "rigid microplates", directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our model provides a simple but powerful way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm*y− 1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm*y− 1.
ISSN: 0040-1951

insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042/document
https://hal-insu.archives-ouvertes.fr/insu-01066042/file/Philippon-brun-tect-2014-HAL.pdf
DOI : 10.1016/j.tecto.2014.04.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mechanism and kinematics of the Late Mesozoic continental extension event of eastern Asia are still debated. In order to better constrain its evolution, two granodioritic plutons of the Jiaodong Peninsula have been chosen as targets for a time-constrained palaeomagnetic study. Indeed, plutons are devoid of visible deformation, did not experience rotation along horizontal axis and are precisely dated by U/Pb and 40Ar/39Ar methods. Multidomain (MD) magnetite has been identified as the principal magnetic remanent carrier. The interpolation of existing and new U/Pb and 40Ar/39Ar ages revealed that characteristic remanent magnetisation was acquired in a narrow range of 116 ± 2 Ma. Twenty out of 27 sites present stable magnetic directions calculated from high-temperature or high-coercive components. The observations of the solo normal magnetic polarity for this palaeomagnetic collection and of the magnetic remanent age consistent with the Cretaceous Normal Superchron (CNS) argue that the characteristic magnetic remanence may be considered as primary. Detailed field observations of the intrusive relationship between the plutons and country rocks and Anisotropy of Magnetic Susceptibility (AMS) study reveal the absence of the subsequent deformation of plutons, or rigid rotation of plutons along a horizontal axis. Two palaeomagnetic poles have been therefore calculated from these plutons. Among 12 out 15 Cretaceous palaeomagnetic poles, including the two new poles provided by this study, from the Jiaodong Peninsula and on both sides of Tan-Lu and Muping-Jimo faults are statistically consistent. As a result, the Jiaodong Peninsula behaved as a rigid block as internal deformation appears negligible. The remaining three derived poles are probably due to the secular variation or/and the vicinity of fault zones near of the palaeomagnetic sampling site. Thus, they can not be applied to the peninsula-scaled tectonics. Comparison of these time52 constrained Cretaceous palaeomagnetic results of the Jiaodong Peninsula with those of North China Block (NCB) indicate that the Jiaodong Peninsula was rigidly attached to NCB since, 3 at least, the Cretaceous as residual difference is clearly insignificant with respect to the error brackets. These new palaeomagnetic results confirm that the relative clockwise (CW) rotation of Eastern Liaoning-Korea Block (ELKB) with respect to NCB does not affect the Jiaodong Peninsula as a rigid block, nevertheless, some tectonic structures have been reactivated since Cenozoic and local rotations could be produced. This palaeomagnetic study reveals that the Late Mesozoic extension in Eastern Asia is heterogeneously expressed in time and space. The complete understanding of the mechanism(s) of this extensional event needs further multidisciplinary investigations.
ISSN: 0031-9201

insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546/document
https://hal-insu.archives-ouvertes.fr/insu-00599546/file/Charles_et_al_PEPI2011.pdf
DOI : 10.1016/j.pepi.2011.05.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The deep structure and deformation mechanisms of the Longmen Shan thrust belt (Sichuan, China), at the eastern border of the Tibetan plateau, were largely debated after the devastating Mw 7.9 Wenchuan earthquake (2008). Recent geophysical studies and field investigations have been focused on the active motion of the major Beichuan fault, which ruptured during the earthquake. However, the total exhumation across the fault still remains unclear. In the hanging wall of the Beichuan fault, the South China block is exhumed in the Pengguan massif. Close to the Beichuan fault, the rocks of the Pengguan massif underwent greenschist facies metamorphism associated with brittle-ductile deformation. No metamorphism is observed in the footwall of the fault. In this study, we characterize and date the metamorphic history recorded in the hanging wall of the Beichuan fault in order to constrain the depth and timing of exhumation of the rocks of the Pengguan massif along the fault. A high-resolution petrological approach involving chemical analyses and X-ray maps was used to analyze the micrometric metamorphic minerals. The P-T conditions of the greenschist facies metamorphic event were estimated by an inverse multi-equilibrium thermodynamic approach. The results, 280 ± 30 °C and 7 ± 1 kbar, suggest that the rocks of the Pengguan massif were exhumed from ca. 20 km depth. Our results underline the importance of the thrusting component in the long-term behavior of the Beichuan fault and provide a minimal depth at which the fault is rooted. In situ laser ablation 40Ar/39Ar dating of metamorphic white mica revealed that the greenschist overprint occurred at 135–140 Ma.The Pengguan massif was therefore partially thrusted along the Beichuan fault during the Lower Cretaceous, long before the Eocene-Miocene exhumation phase which is well-constrained by low-temperature thermochronology. Our results provide the first independent depth information for the exhumation history of the Pengguan massif and reveal a previously undocumented Lower Cretaceous tectonic event that marks the onset of the thick-skinned deformation in the external domain of the Longmen Shan (East of the Wenchuan Fault).
ISSN: 0743-9547

hal-01685556
https://hal.archives-ouvertes.fr/hal-01685556
DOI : 10.1016/j.jseaes.2017.04.003

Éditeur(s) : HAL CCSD
Résumé : We present an experimental study of relations between hydraulic properties of clayey rocks and their deformation at bulk and micro scale. The experimentation is based on triaxial deformation of kaolinitic core samples, on permeability measurements, and on several methods of analysis of the microstructure. To produce the samples, remoulded kaolinite material is consolidated by axial loading up to 20 MPa in an oedometric cell. Then, in a triaxial cell, an undrained stress path is applied in order to induce shearing damage in the sample. The permeability of the sample is measured by fluid flow across the sample. Before and after these hydro-mechanical tests, the evolution and the homogeneity of the pore space and moreover the texture of the material are analysed by X-ray tomography, environmental scanning electron microscopy and thermic neutron diffraction. Contrary to expectations, the permeability at the sample scale does not vary significantly, although quite large deformation is reached. The final deformation is heterogeneous, with well-developed shear bands. It appears that the development of compacting and dilating zones generates a heterogeneous permeability field, which results in a negligible variation of the bulk permeability at the sample scale.
International Journal of Rock Mechanics and Mining Science

hal-00496407
https://hal.archives-ouvertes.fr/hal-00496407
DOI : 10.1016/j.ijrmms.2010.04.007

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The properties of the subduction interplate domain are likely to affect not only the seismogenic potential of the subduction area but also the overall subduction process, as it influences its viability. Numerical simulations are performed to model the long-term equilibrium state of the subduction interplate when the diving lithosphere interacts with both the overriding plate and the surrounding convective mantle. The thermomechanical model combines a non-Newtonian viscous rheology and a pseudo-brittle rheology. Rock strength here depends on depth, temperature and stress, for both oceanic crust and mantle rocks. I study the evolution through time of, on one hand, the brittle-ductile transition (BDT) depth, zBDT, and, on the other hand, of the kinematic decoupling depth, zdec, simulated along the subduction interplate. The results show that both a high friction and a low ductile strength at the asthenospheric wedge tip shallow zBDT. The influence of the weak material activation energy is of second order but not negligible. zBDT becomes dependent on the ductile strength increase with depth (activation volume) if the BDT occurs at the interplate decoupling depth. Regarding the interplate decoupling depth, it is shallowed (1) significantly if mantle viscosity at asthenospheric wedge tip is low, (2) if the difference in mantle and interplate activation energy is weak, and (3) if the activation volume is increased. Very low friction coefficients and/or low asthenospheric viscosities promote zBDT = zdec. I then present how the subducting lithosphere age affects the brittle-ductile transition depth and the kinematic decoupling depth in this model. Simulations show that a rheological model in which the respective activation energies of mantle and interplate material are too close hinders the mechanical decoupling at the down-dip extent of the interplate, and eventually jams the subduction process during incipient subduction of a young (20-Myr-old) and soft lithosphere under a thick upper plate. Finally, both the BDT depth and the decoupling depth are a function of the subducting plate age, but are not influenced in the same fashion: cool and old subducting plates deepen the BDT but shallow the interplate decoupling depth. Even if BDT and kinematic decoupling are intrinsically related to different mechanisms of deformation, this work shows that they are able to interact closely. Comparison between modelling results and observations suggests a minimum friction coefficient of 0.045 for the interplate plane, even 0.069 in some cases, to model realistic BDT depths. The modelled zdec is a bit deeper than suggested by geophysical observations. Eventually, the better way to improve the adjustment to observations may rely on a moderate to strong asthenosphere viscosity reduction in the metasomatised mantle wedge.
ISSN: 1869-9510

hal-00795559
https://hal.archives-ouvertes.fr/hal-00795559
DOI : 10.5194/se-3-467-2012, 2012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Lithospheric-scale faults related to oblique subduction are responsible for some of the most hazardous earthquakes reported worldwide. The mega-thrust in the Sunda sector of the Sumatran oblique subduction has been intensively studied, especially after the infamous 2004 Mw 9.1 earthquake, but its onshore kinematic complement within the Sumatran subduction, the transform Sumatran Fault System, has received considerably less attention. In this paper, we apply a combination of analysis of Digital Elevation Models (ASTER GDEM) and field evidence to resolve the kinematics of the leading edge of deformation of the northern sector of the Sumatran Fault System. To this end, we mapped the northernmost tip of Sumatra, including the islands to the northwest, between 4.5°N and 6°N. Here, major topographic highs are related to different faults. Using field evidence and our GDEM structural mapping, we can show that in the area where the fault bifurcates into two fault strands, two independent kinematic regimes evolve, both consistent with the large-scale framework of the Sumatran Fault System. Whereas the eastern branch is a classic Riedel system, the western branch features a fold-and-thrust belt. The latter contractional feature accommodated significant amounts (c. 20%) of shortening of the system in the study area. Our field observations of the tip of the NSFS match a strain pattern with a western contractional domain (Pulau Weh thrust splay) and an eastern extensional domain (Pulau Aceh Riedel system), which are together characteristic of the tip of a propagating strike-slip fault, from a mechanical viewpoint. For the first time, we describe the strain partitioning resulting from the propagation of the NSFS in Sumatra mainland. Our study helps understanding complex kinematics of an evolving strike-slip system, and stresses the importance of field studies in addition to remote sensing and geophysical studies.
ISSN: 0040-1951

hal-01467196
https://hal.archives-ouvertes.fr/hal-01467196
DOI : 10.1016/j.tecto.2016.04.050

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use 3-D mechanical modeling representing faults as planar surfaces with frictional properties that obey Coulomb-failure process to explore the long-term slip rates of the Altyn Tagh fault and Kunlun faults in the north Tibetan plateau. Crustal theology is simplified as an elastoplastic upper crust and a viscoelastic lower crust. Far-field GPS velocities and late Quaternary fault slip rates are used to constrain the model results. Rheological tests show that effective fault friction lower than 0.1-0.08 leads to high slip rates that fit with geologically and geodetically determined slip rates of the Kunlun fault (10-11.7 +/- 1.5 mm/yr). Meanwhile, the modeled Altyn Tagh fault reaches slip rates similar to 13.7 mm/yr to similar to 7.8 mm/yr in its central portion, between ranges of the geological slip rates. Associated with high slip rates, our model predicts that central Tibet (similar to 84 degrees E-95 degrees E) from the Altyn Tagh fault to the north of the Himalayan arc accommodates north-south shortening and east-west extension rates of similar to 10-12 mm/yr and similar to 8-10 mm/yr, respectively. We also question the widely accepted idea that interseismic strain is driven at the base of the seismogenic zone by a screw dislocation. If this assumption fails, the presented model implies that interseismic strain around large strike-slip faults could be distributed in a much broader way if the lithosphere deforms as a thin elastic plate rather than an elastic half-space with an embedded dislocation. If this distributed deformation is ignored, and the instantaneous surface deformation field modeled as that resulting from slip on a dislocation below a specified depth embedded in an elastic half-space, the estimated slip rate will inevitably be lower than the true long-term slip rate. This appears to explain why geodetic slip rates proposed for the Altyn Tagh fault (510 mm/yr) are lower than some of the geological slip rates. (C) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00411926
https://hal.archives-ouvertes.fr/hal-00411926
DOI : 10.1016/j.epsl.2008.06.049

Éditeur(s) : HAL CCSD Frontiers Media
Résumé : International audience
We present high resolution observations of microstructure and texture evolution during dynamic recrystallization (DRX) of ice polycrystals deformed in the laboratory at high temperature (≈0.98Tm). Ice possesses a significant viscoplastic anisotropy that induces strong strain heterogeneities, which result in an early occurrence of DRX mechanisms. It is therefore a model material to explore these mechanisms. High resolution c-axis measurements at sample scale by optical techniques and full crystallographic orientation measurements by cryo-Electron Back Scattering Diffraction (EBSD) provide a solid database for analyzing the relative impact of the macroscopic imposed stress vs. the local and internal stress fields on DRX mechanisms. Analysis of misorientation gradients in the EBSD data highlights a heterogeneous dislocation distribution, which is quantified by the Nye tensor estimation. Joint analyses of the dislocation density maps and microstructural observations highlight spatial correlation between high dislocation density sites and the onset of nucleation taking place by grain-boundary bulging, subgrain rotation or by the formation of kink-bands.
ISSN: 2296-6463

hal-01515284
https://hal.univ-lorraine.fr/hal-01515284
DOI : 10.3389/feart.2015.00081

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper we present a microfluidic architecture dedicated to the study of Red Blood Cells (RBCs) deformability in microchannel smaller than the cell shape (biconcave disc of 7-8 μm in diameter) and cell capability to pass through slits separated by a gap value down to 2 μm, acting as a filter. This device is use in the context of RBCs disorders affecting their deformability, which is analysed versus number of cells trapped in the filter. This device can be seen as mimicking the human spleen. Microfabrication of the chip is based on polydimethylsiloxane (PDMS) associated to a two level thick photoresist mould (SU8). One level is used for microfluidic access with a 25 μm thickness towards the studied zone. The second level concerns the mimicking zones where RBCs flow through 5 μm down to 2 μm-wide slits acting like a mechanical filter. This level has a thickness of 5 μm. Devices have been tested on RBCs having specific disorder on their mechanical elasticity in order to validate the design principle. Two cases are presented in this paper: a.) Sickle RBCs inducing cell rigidity at two levels b.) Parasitized RBCs by Plasmodium falciparum. On both cases, we clearly show that deformability of RBCs influences the capability to pass through small slits (down to 2um) and thus is in relation with the pathology stage. This spleen-like microfluidic chip mimicking the RBCs filtering function is a promising tool for the exploration of RBC disorders combined with mechanical alterations.
4th European Conference on Microfluidics
Limerick, Ireland

hal-01113061
https://hal.archives-ouvertes.fr/hal-01113061

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Although they are famous among Earth scientists, the Lherz peridotites are exposed within geological formations of the North Pyrenean Zone (NPZ) still lacking detailed investigations. Our study focuses on the metasediments of the Aulus basin hosting the Lherz peridotite body and associated ultramafic fragments of smaller size. The new data set comprises of structural analysis and detailed geological mapping of the massive Mesozoic marbles that form the prerift sequence typical of the NPZ and of the ultramafic-rich clastic breccia formations surrounding the peridotite bodies. The massive marbles display an evolution from hot and ductile to cold and brittle deformation, indicative of an exhumation process ending with the sedimentary reworking of both the deformed Mesozoic metasediments and the exhumed ultramafic rocks. Crystal Preferred Orientations (CPO) measured in the marbles support a deformation mechanism by dislocation creep of calcite, which is dominant between 400 8C and 600 8C; these deformation temperatures are within the range determined earlier by Clerc et al. (2015), using RSCM (Raman Spectroscopy of Carbonaceous Material) geothermometry. As a consequence, we better describe the transition from ductile to brittle deformation in the prerift marbles and clarify the origin of the syn-rift breccias. Due to continuous exhumation along detachments' faults, the brecciated metamorphic carbonates of the prerift NPZ sedimentary cover were passively uplifted towards shallower levels and progressively unroofed, while transported passively on the back of the exhumed ultramafic footwall. These results are consistent with the recent interpretations of the North Pyrenean peridotites as remnants of subcontinental mantle rocks exhumed within the pre-Pyrenean rift system. We emphasize the importance of tectonic decoupling between the Mesozoic sedimentary cover and the Palaeozoic basement, which leads to the juxtaposition of metamorphosed and deformed Mesozoic Please cite this article in press as: Lagabrielle Y, et al. Very high geothermal gradient during mantle exhumation recorded in mylonitic marbles and carbonate breccias from a Mesozoic Pyrenean palaeomargin (Lherz area, North Pyrenean Zone, France). C. R. Geoscience (2016), http://dx.
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079/document
https://hal-insu.archives-ouvertes.fr/insu-01285079/file/1-s2.0-S1631071315002060-main.pdf
DOI : 10.1016/j.crte.2015.11.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Probabilistic seismic hazard analyses (PSHA) are commonly based on frequency magnitude statistics from 50-100 yearlong earthquake catalogs, assuming that these statistics are representative of the longer-term frequency of large earthquakes. We test an alternative PSHA approach in continental western Canada, including adjacent areas of northwestern U. S. A., using regional strain rates derived from 179 Global Positioning System (GPS) horizontal velocities. GPS strain rates are converted to earthquake statistics, seismic moment rates, and ground shaking probabilities in seismic source zones using a logic-tree method for uncertainty propagation. Median GPS-based moment rates and shaking estimates agree well with those derived from earthquake catalogs in only two zones (Puget Sound and mid-Vancouver Island). In most other zones, median GPS-based moment rates are 6-150 times larger than those derived from earthquake catalogs (shaking estimates 2-5 times larger), although the GPS-based and catalog estimates commonly agree within their 67% uncertainties. This discrepancy may represent an under-sampling of long-term moment rates and shaking by earthquake catalogs in some zones; however a systematic under-sampling is unlikely over our entire study area. Although not demonstrated with a high confidence level, long-term regional aseismic deformation may account for a significant part of the GPS/catalog discrepancy and, in some areas, represent as much as 90% of the total deformation budget. In order to integrate GPS strain rates in PSHA models, seismic versus aseismic partitioning of long-term deformation needs to be quantified and understood in terms of the underlying mechanical processes.
ISSN: 0148-0227

hal-00689004
https://hal.archives-ouvertes.fr/hal-00689004
DOI : 10.1029/2011JB008213

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Based on observations from both modem convergent margins and sandbox modeling, we examine the possible conditions favoring frontal accretion and/or frontal and basal tectonic erosion. Mean characteristic parameters (!.t, !.t* • and [) are used to discuss the mechanical stability of 28 transects across the frontal part of convergent margins where the Coulomb theory is applicable. Natural observations reveal that "typical accretionary wedges" are characterized by low tapers with smooth surface slope and subducting plate, low convergence rates and thick trench sediment, while "nonaccretionary wedges" display large tapers with irregular surface slopes and rough subducting plate, high convergence rates and almost no trench fill. Sandbox experiments were performed to illustrate the effects of seamounts/ridges in the subduction zone on the deformation of an accretionary wedge. These experiments show that a wedge of sand is first trapped and pushed in front of the seamount which acts as a moving bulldozer. This is followed by a tunnelling effect of the subducting seamount through the frontal wedge material, which results in considerable sand reworking. At an advanced subduction stage, the d6collement jumps back from a high level in the wedge to its former basal position. We conclude that a high trench sedimentation rate relative to the convergence rate leads to frontal accretion. In contrast, several conditions may favor tectonic erosion of the upper plate. First, oceanic features, such as grabens, seamounts or ridges, may trap upper plate material during their subduction process. Second, destabilization of the upper plate material by internal fluid overpressuring causing hydrofracturing is probably another important mechanism.
ISSN: 0148-0227

hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600/document
https://hal.archives-ouvertes.fr/hal-01261600/file/lallemandJGR1994.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The aim of this study is to bring new information on water storage dynamics in karst systems from tiltmeter measurements. Newly developed long-base hydrostatic tiltmeters are installed at two sites on the Larzac plateau (France) in a karst aquifer of similar to 100 km(2) recharge area. Each site is located within a karst cave where two tilt directions are monitored. Significant reversible tilt deformation reaching amplitudes of 10(-6) to 10(-5) rad was observed at both sites following heavy precipitation. Elastic parameters were determined with an experiment in which a tiltmeter site was loaded by up to 25 t of weight at strategic locations at the ground surface. Mechanisms responsible for the observed tilt were then examined by means of finite element modeling. Deformation induced by water pressure changes in fractures is our preferred interpretation as the most plausible mechanism. Within this scope, we used the tiltmeter responses to extract time constants using lumped parameter modeling. Time constants are interpreted to be associated with the filling and emptying of fractures nearby the tiltmeters. These instruments therefore appear as useful tools to study the local dynamics of water infiltration in karst systems.
ISSN: 0043-1397

hal-00534461
https://hal.archives-ouvertes.fr/hal-00534461
DOI : 10.1029/2009WR008082