Éditeur(s) : HAL CCSD
Résumé : The method of shear-wave splitting provides a unique possibility to identify seismic anisotropy, which is a result of the preferred orientations of the anisotropic minerals by deformation. The novel software SplitLab, presented in this thesis, simplifies the data processing. The comparison of three independent techniques makes it possible to associate an objective quality to the results and also to define a criterion to automatically detect events without splitting (“Nulls”). This criterion is applied to shear-wave splitting measurements at 16 stations located on the East European Craton. The results indicate that the fast directions reflect the ancient blocks, which constitute the East European Craton. The fast directions in south-west are aligned with the margin of the craton and continue the general tendency of offcraton stations. The stations in the Ural foredeep show fast directions perpendicular to the general tendency of the mountain chain. Various indicators give reason to assume lithospheric origins of anisotropy
La mesure du déphasage des ondes de cisaillement offre la possibilité de caractériser l'anisotropie sismique présente dans les différentes couches de la Terre, qui résulte généralement des orientations préférentielles des minéraux anisotropes induites par la déformation. Le nouveau logiciel SplitLab présenté dans cette thèse, simplifie le traitement des données depuis la requête des données jusqu'à la masure de déphasage et l'interprétation des résultats. La comparaison de trois techniques indépendantes pour mesurer ce déphasage permet de quantifier la qualité des résultats et de détecter automatiquement les mesures sans déphasage apparent. Ce critère est appliqué aux mesures de déphasages des ondes SKS enregistrées en 16 stations situées sur le Craton Est Européen. Les résultats indiquent que les directions rapides reflètent les structures anciennes, qui constituent le Craton Est Européen. En outre, les directions rapides dans le Sud-ouest s'alignent avec la bordure du craton et sont en continuité avec la tendance générale définie par les stations éloignées du Craton. Les stations dans les unités externes de l'Oural montrent des directions rapides perpendiculaires à la tendance générale de la chaîne de montagne.
https://tel.archives-ouvertes.fr/tel-00539114

tel-00539114
https://tel.archives-ouvertes.fr/tel-00539114
https://tel.archives-ouvertes.fr/tel-00539114/document
https://tel.archives-ouvertes.fr/tel-00539114/file/thesewustefeld.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We report measurements of long-period P wave polarization (P pol) in Australia and Tahiti made by combining modeling of the polarization deviation and harmonic analysis. The analysis of the deviation of the horizontal polarization of the P wave as a function of event back azimuth may be used to obtain information about (1) sensor misorientation, (2) dipping discontinuities, (3) seismic anisotropy, and (4) velocity heterogeneities beneath a seismic station. The results from harmonic analysis and a grid search using Snell's law suggest the presence of a dipping seismic discontinuity beneath stations CTAO and CAN in Australia. These results are consistent with published receiver function studies for these stations. The P pol fast axis orientation is close to the N–S absolute plate motion direction at station TAU (Tasmania), which may be due to plate-motion-driven alignment of olivine crystals in the asthenosphere. Interestingly, measurements of SKS splitting at Tahiti (French Polynesia) show an apparent isotropy, whereas an inversion of P pol observations at PPTL seismic station located in Tahiti suggests the presence of two anisotropic layers. The fast axis azimuth is oriented E–W in the upper layer, and it is close to the NW–SE orientation in the lower layer. Since P pol orientations are used for real-time earthquake locations, especially in poorly instrumented areas such as the South Pacific, we show that the bias from anisotropy and sensor misorientation determined here can be corrected to improve the location accuracy, which yields fundamental data for rapid location necessary for effective tsunami warning.
ISSN: 2169-9313

hal-01389113
http://hal.univ-reunion.fr/hal-01389113
http://hal.univ-reunion.fr/hal-01389113/document
http://hal.univ-reunion.fr/hal-01389113/file/Fontaine_Ppol_JGR2009.pdf
DOI : 10.1029/2008JB005709

Éditeur(s) : Amer Geophysical Union
Résumé : This study focuses on the improved estimation of mesoscale surface ocean circulation obtained by merging TOPEX/Poseidon (T/P) and ERS-1 and -2 altimeter measurements between October 1992 and May 1998. Once carefully intercalibrated and homogenized, these data are merged through an advanced global objective analysis method that allows us to correct for residual long wavelength errors and uses realistic correlation scales of ocean dynamics, The high-resolution (0.25 degrees x 0.25 degrees) merged T/P + ERS-1 and -2 sea level anomaly maps provide more homogeneous and reduced mapping errors than either individual data set and more realistic sea level and geostrophic velocity statistics than T/P data alone. Furthermore, the merged T/P + ERS-1 and -2 maps yield eddy kinetic energy (EKE) levels 30% higher than maps of T/P alone. They also permit realistic global estimates of east and north components of EKE and their seasonal variations, to study EKE sources better. A comparison of velocity statistics with World Ocean Circulation Experiment surface drifters in the North Atlantic shows very good agreement. Comparison with contemporary current meter data in various oceanic regimes also produces comparable levels of energy and similar ratios of northward and eastward energy, showing that the maps are suitable to studying anisotropy. The T/P + ERS zonal and meridional components of the mapped currents usually present comparable rms variability, even though the variability in the Atlantic is more isotropic than that in the Pacific, which exhibits strong zonal changes. The EKE map presents a very detailed description, presumably never before achieved at a global scale. Pronounced seasonal changes of the EKE are found in many regions, notably the northeastern Pacific, the northeastern and northwestern Atlantic, the tropical oceans, and the zonally extended bands centered near 20 degrees S in the Indian and western Pacific Oceans and at 20 degrees N in the northwestern nl Pacific.
Journal Of Geophysical Research-oceans (0148-0227) (Amer Geophysical Union), 2000-08 , Vol. 105 , N. C8 , P. 19477-19498

Droits : 2000 AGU
http://archimer.ifremer.fr/doc/00079/19033/16617.pdf
DOI:10.1029/2000JC900063
http://archimer.ifremer.fr/doc/00079/19033/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have investigated the seismic anisotropy from SKS and SKKS wave splitting along a N-S profile perpendicular to the Pyrenean mountain belt. The line crossed the North Pyrenean Fault (NPF), which probably represents the plate boundary between the European and the Iberian plates. We observed large delay times δt (1.3 to 1.5 s) and uniform fast polarization directions ϕ (N100E) at three stations located on the Iberian plate. On the other hand, δt are smaller (0.5–1.0 s) and the ϕ scattered at stations located north of the NPF. The small scale variability, the relation with surface geology and the correlation of the δt with lithospheric thickness suggest that the anisotropy could be predominantly of lithospheric origin. However, an asthenospheric contribution cannot be ruled out. In the North Pyrenean Zone, an important thermal event before the Pyrenean compression has likely erased the former mantle fabric. The observed anisotropy is then likely related to the Pyrenean orogeny. On the Iberian plate, our splitting parameters are similar to those obtained at two stations located on Hercynian structures in Central Spain. This suggests that two contributions are likely superposed to that of the Pyrenean built up: one related to the Hercynian orogeny and the other one related to the rotation of the Iberian plate.
ISSN: 0094-8276

hal-01389118
http://hal.univ-reunion.fr/hal-01389118
http://hal.univ-reunion.fr/hal-01389118/document
http://hal.univ-reunion.fr/hal-01389118/file/barruol_pyr_GRL1995.pdf
DOI : 10.1029/94GL03225

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The northern Canadian Cordillera (NCC) is an active orogenic belt in northwestern Canada characterized by deformed autochtonous and allochtonous structures that were emplaced in successive episodes of convergence since the Late Cretaceous. Seismicity and crustal deformation are concentrated along corridors located far (>200 to ~800 km) from the convergent plate margin. Proposed geodynamic models require information on crust and mantle structure and strain history, which are poorly constrained. We calculate receiver functions using 66 broadband seismic stations within and around the NCC and process them to estimate Moho depth and P-to-S velocity ratio (Vp/Vs) of the Cordilleran crust. We also perform a harmonic decomposition to determine the anisotropy of the subsurface layers. From these results, we construct simple seismic velocity models at selected stations and simulate receiver function data to constrain crust and uppermost mantle structure and anisotropy. Our results indicate a relatively flat and sharp Moho at 32 ± 2 km depth and crustal Vp/Vs of 1.75 ± 0.05. Seismic anisotropy is pervasive in the upper crust and within a thin (~10–15 km thick) sub-Moho layer. The modeled plunging slow axis of hexagonal symmetry of the upper crustal anisotropic layer may reflect the presence of fractures or mica-rich mylonites. The subhorizontal fast axis of hexagonal anisotropy within the sub-Moho layer is generally consistent with the SE-NW orientation of large-scale tectonic structures. These results allow us to revise the geodynamic models proposed to explain active deformation within the NCC.
ISSN: 2169-9313

Droits : info:eu-repo/semantics/OpenAccess
hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550/document
https://hal.archives-ouvertes.fr/hal-01685550/file/Tarayoun_et_al-2017-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2017JB014284

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We performed torsional deformation experiments on pre-hydrated fine-grained olivine aggregates using an innovative experimental assembly to investigate water weakening in mantle rocks at high shear strains. San Carlos olivine powder was cold-pressed and then hot-pressed under hydrous conditions, producing aggregates with average grain sizes of 7 or 15 μm. Deformation experiments were performed in a high-resolution gas-medium apparatus equipped with a torsional actuator, under a confining pressure of 300 MPa, a temperature of 1200 °C, and constant shear strain rates ranging from 8 × 10−5 to 1.4 × 10−4 s−1. Maximum shear stresses range from 150 to 195 MPa. These values are 30% lower relative to those determined in previous torsion experiments on dry, fined-grained dunites under similar conditions. Textures and microstructures of the starting and deformed specimens were characterized by scanning and transmission electron microscopy. All deformed aggregates exhibit a shape-preferred orientation marking a foliation and lineation, as well as a reduction in mean grain size from 15 μm down to 3-4 μm due to dynamic recrystallization. Olivine crystallographic fabrics developed rapidly (γ < 0.1), but their strength, characterized by the J-index, is low compared to naturally deformed peridotites or to polycrystalline olivine deformed at similar finite shear strains under dry conditions. The crystallographic fabrics are consistent with deformation by a dislocation accommodated creep mechanism with activation of multiple {0 k l}[1 0 0] systems, among which the (0 1 0)[1 0 0] slip system is dominant, and minor participation of the (0 1 0)[0 0 1] slip system. Transmission electron microscopy confirmed the occurrence of dislocations with [1 0 0] and [0 0 1] Burgers vectors in most grains. Analysis of unpolarized infrared spectra indicates that hydrogen concentration in the olivine lattice is below the saturation level of 18 ppm wt H2O, which is similar to those typically observed in spinel-bearing peridotite xenoliths, and also provide evidence for water-rich inter-granular material trapped in pores and grain boundaries. Seismic properties computed from the CPO observations correspond to those most commonly observed in naturally deformed mantle peridotites with fast P-wave propagation and S-wave polarization subparallel to the shear direction. These torsion experiments on fine-grained olivine polycrystals under hydrous conditions indicate that water weakening under lithospheric conditions is linked to various defects with hydrogen in the olivine structure, as well as with water-derived species in grain boundaries or pores.
ISSN: 0031-9201

hal-00745170
https://hal.archives-ouvertes.fr/hal-00745170
DOI : 10.1016/j.pepi.2012.05.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We present new archaeointensity results from three Italian kilns situated at Ascoli Satriano, Vagnari and Fontanetto Po obtained with the Thellier modified by Coe double heating method. These data complement the directional results previously published. All sites are dated on the basis of archaeological information and/or thermoluminescence dating. The results are corrected for the anisotropy of the thermoremanent magnetization and the cooling rate effects. The new data are compared with previously published archaeointensity data from Italy and nearby countries within 900 km radius from Viterbo. An initial data set including archaeointesity data mainly coming from Italy, France, Switzerland, Czech Republic, Slovakia, Hungary, Greece and Bulgaria has been compiled. After the application of strict selection criteria, the most reliable data have been used for the calculation of a preliminary Italian intensity secular variation (SV) curve for the last 3000 yr. The new curve covers the 300 BC-400 AD and 1200-1900 AD periods. It is established by means of sliding windows of 200 yr shifted by 100 yr. The lack of reliable data for the 1000-200 BC and 400-1200 AD time intervals does not permit the calculation of a continuous curve. Clearly, more high-quality archaeointensity data from Italy and Europe are still needed to draw a robust intensity SV curve for the Italian Peninsula that could be used for archaeomagnetic dating in combination with the directional data.
ISSN: 0956-540X

hal-00828691
https://hal.archives-ouvertes.fr/hal-00828691
DOI : 10.1093/gji/ggs120

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The kinetics of hydrogenation of dry iron-bearing olivine single crystals was determined by performing hydration experiments under hydrothermal conditions at high pressure. The experiments were performed in a multi-anvil press at 3 GPa, for a temperature range between 900 and 1200 °C and for various durations. The oxygen fugacity was buffered along Ni-NiO joint. Polarized Fourier transform infrared spectroscopy and recent empirical calibration were used to quantify the hydroxyl distributions in the samples along crystallographic axes after the experiments. The chemical diffusion coefficients are similar (barely slower) than in olivine hydrated at lower pressure (0.2 and 0.3 GPa) for the same diffusion mechanism. Under the given experimental conditions, the anisotropy of diffusion is the same as for proton-vacancy mechanism, with diffusion along the [0 0 1] axis faster than along the [1 0 0]. However, the anisotropy at 3 GPa is weaker compared to measurements at lower pressures and the analysis of concentration profiles using 3D models shows that an isotropic solution could also be relevant. Fits of the diffusion data to an Arrhenius law yield activation energies for the slightly faster [0 0 1] axis of the crystallographic axes around 198 ± 5 kJ mol−1, a value only slightly lower than the results from previous experimental studies for natural iron-bearing olivine hydrogenated at lower confining pressure. At 3 GPa, hydrogenation can be well approximated by a single mechanism controlled by coupled diffusion of protons and octahedral vacancies (di- and tri-valent ions). The diffusion rates are fast enough to alter hydrogen concentration within olivine in xenoliths ascending from the mantle or experiencing hydrogen-rich metasomatism events, but too slow to permit complete homogenization of hydrogen in olivine-rich rocks at kilometer scale in less than one My.
ISSN: 0031-9201

hal-01412663
https://hal.archives-ouvertes.fr/hal-01412663
DOI : 10.1016/j.pepi.2016.08.005

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD
Résumé : International audience
Seismic anisotropy is a ubiquitous feature of the subcontinental mantle. This can be inferred both from direct seismic observations of shear wave splitting from teleseismic shear waves, as well as the petrofabric analyses of mantle nodules from kimberlite pipes. The anisotropy is principally due to the strain-induced lattice preferred orientation (LPO) of olivine. The combined use of these mantle samples, deformation experiments on olivine, and numerical modeling of LPO, provides a critical framework for making inferences about mantle deformation from observed seismic anisotropy. In most cases there is a close correspondence between mantle deformation derived from seismic observations of anisotropy, and crustal deformation, from the Archean to the present. This implies that the mantle plays a major, if not dominant role in continental deformation. No clear evidence is found for a continental asthenospheric decoupling zone, suggesting that continents are probably coupled to general mantle circulation.
Mantle Petrology: Field Observations and high Pressure experimentations: a Tribute to Francis R. (Joe) Boyd

hal-01391514
http://hal.univ-reunion.fr/hal-01391514
http://hal.univ-reunion.fr/hal-01391514/document
http://hal.univ-reunion.fr/hal-01391514/file/Silver_et_al_BoydVolume 1999_hal.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Espinho Branco anatexite, located within a transcurrent, high-temperature shear zone in NE Brazil, was the subject of a comprehensive petrostructural study (Anisotropy of Magnetic Susceptibility - AMS, Anisotropy of Anhysteretic Remanence - AAR, Electron Backscatter Diffraction - EBSD) to evaluate the compatibility of different fabrics with the kinematics of melt deformation. Magnetite dominates susceptibilities larger than 1 mSI and biotite displays [001] lattice directions consistent with AMS k3 axes. In contrast, migmatites with a susceptibility lower than 0.5 mSI and no visible mesoscopic foliation provide crystallographic fabrics distinct from AMS and AAR. However, AAR remains consistent with the regional strain field. These results suggest that the correlation of field, AMS and crystallographic fabrics is not always straightforward despite the relatively simple organisation of the magnetic fabric in the anatexite. We conclude that AMS recorded the final stages of the strain field in the migmatite irrespective of its complex mesoscale structures and contrasting crystallographic fabrics.
ISSN: 0191-8141

hal-00823056
https://hal.archives-ouvertes.fr/hal-00823056
DOI : 10.1016/j.jsg.2012.12.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims to apply the AMS method (Anisotropy of Magnetic Susceptibility) at a regional scale to track the fluid circulation direction that has produced an iron metasomatism within pre-existing dolomite host rock. The Urgonian formations hosting the Zn-Pb mineralizations in La Florida (Cantabria, northern Spain) have been taken as target for this purpose. Sampling was carried out, in addition to ferroan dolomite host rock enclosing the Zn-Pb mineralizations, in dolomite host rock and limestone to make the comparison possible between magnetic signals from mineralized rocks, where fluid circulation occurred, and their surrounding formations. AMS study was coupled with petrofabric analysis carried out by texture goniometry, Scanning Electron Microscopy (SEM) observations and also Shape Preferred Orientation (SPO) statistics. SEM observations of ferroan dolomite host rock illustrate both bright and dark grey ribbons corresponding respectively to Fe enriched and pure dolomites. SPO statistics applied on four images from ferroan dolomite host rock give a well defined orientation of ribbons related to the intermediate axis of magnetic susceptibility K2. For AMS data, two magnetic fabrics are observed. The first one is observed in ferroan dolomite host rock and characterised by a prolate ellipsoid of magnetic susceptibility with a vertical magnetic lineation. The magnetic susceptibility carrier is Fe-rich dolomite. These features are probably acquired during metasomatic fluid circulations. In Fe-rich dolomite host rock, ‹c› axes are vertical. As a rule, (0001) planes (i.e. planes perpendicular to ‹c› axes) are isotropic with respect to crystallographic properties. So, the magnetic anisotropy measured in this plane should reflect crystallographic modification due to fluid circulation. This is confirmed by the texture observed using the SEM. Consequently, AMS results show a dominant NE-SW elongation interpreted as the global circulation direction and a NW-SE secondary elongation that we have considered as sinuosities of the fluid trajectory. The second type of magnetic fabric is essentially observed in the limestone and characterised by an oblate form of the ellipsoid of magnetic susceptibility, a horizontal magnetic foliation and mixed magnetic susceptibility carriers. It is interpreted as a sedimentary fabric.
ISSN: 0012-821X

insu-00342499
https://hal-insu.archives-ouvertes.fr/insu-00342499
https://hal-insu.archives-ouvertes.fr/insu-00342499/document
https://hal-insu.archives-ouvertes.fr/insu-00342499/file/Essalhi-EPSL-2008.pdf
DOI : 10.1016/j.epsl.2008.11.011

Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Splitting of teleseismic shear waves has been measured in the Appalachians (eastern USA) and the Pyrenees (western Europe) using data recorded by permanent and portable stations. From a comparison of the results, it appears that an interpretation of the recorded seismic anisotropy in terms of geodynamics is not straightforward. Successive geodynamic events have generated structures that may have resulted in a similar pattern of mantle flow and that therefore may have contributed in the development of the recorded anisotropy. Combining geological and geophysical arguments, it appears that the mantle anisotropy measured across the Appalachians and the Pyrenees may not be systematically Appalachian or Pyrenean in age but may be mainly due to a lithospheric structure formed during earlier major tectonic events, i.e. the Grenvillian and the Hercynian orogenies, respectively. We suggest that during major episodes of continent assembly, a pervasive tectonic fabric is developed in the lithospheric mantle. In the subsequent evolution of the continent, this fabric may induce a significant mechanical anisotropy that will drastically influence the mechanical behaviour of the Iithosphere when submitted to new tectonic events.
ISSN: 0031-9201

hal-01389717
http://hal.univ-reunion.fr/hal-01389717
http://hal.univ-reunion.fr/hal-01389717/document
http://hal.univ-reunion.fr/hal-01389717/file/Vauchez_Barruol-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03125-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Peridotite xenoliths with a broad range of textures provides evidence for consistent microstructural evolution in a vertical transect of the shallow lithospheric mantle (35?55 km depth) beneath the Persani Mountains, SE Carpathians, Romania, due to ongoing plate convergence in the Carpathian Arc nearby. The recrystallized grain size, crystal preferred orientations strength, and resulting seismic anisotropy vary continuously and display a strong correlation to equilibrium temperatures, suggesting a continuous change in deformation conditions with depth. The shallowmost xenoliths have microstructures typical of high stress deformation, marked by strong recrystallization to fine grain sizes, which results in weak crystal preferred orientations and anisotropy. The deepest xenoliths have coarse-grained porphyroclastic microstructures and strong crystal preferred orientations. Replacive orthopyroxene structures, consuming olivine, and high H2O concentrations in the pyroxenes are observed in some xenoliths indicating limited percolation of fluids or volatile-rich melts. Despite the high stress deformation and high H2O contents in some of the studied xenoliths, analysis of olivine crystallographic orientations indicates that [100] slip systems, rather than ?wet? [001] accommodate most of the deformation in all samples. Seismic anisotropy estimated from the measured olivine and pyroxene crystal preferred orientations suggests that the strike-parallel fast SKS polarization directions and ~ 1 s delay times measured in the SE Carpathians are likely the consequence of convergence-driven belt-parallel flow in the lithospheric mantle.
ISSN: 0012-821X

hal-00317303
https://hal.archives-ouvertes.fr/hal-00317303
DOI : 10.1016/J.EPSL.2008.04.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : Upper mantle flow beneath the French Massif Central is investigated using teleseismic shear wave splitting induced by seismic anisotropy. About 25 three component stations (short period, intermediate and broad-band) were installed during the period 1998-1999 in the southern Massif Central, from the Clermont Ferrand volcanic area to the Mediterranean sea. Teleseismic shear waves (SKS, SKKS and PKS) were used to determine the splitting parameters: the fast polarization direction and the delay time. Delay times ranging between 0.7 and 1.5 s have been observed at most of the sites. The azimuths of the fast split shear waves trend homogeneously NW-SE in the southern Massif Central suggesting a homogeneous mantle flow beneath this area. The observed NW-SE direction differs from the N100°E Pyrenean anisotropy further South. It does not appear to be correlated to Hercynian structures nor to the present-day motion of the plate but is well correlated to the Tertiary extension direction. We propose that the opening of the western Mediterranean induced by the rotation of the Corsica-Sardinia lithospheric bloc and the roll-back to the SE of the Tethys slab may have generated a large asthenospheric mantle flow beneath the southern Massif Central and a deflection of the up going plume centered beneath the northern Massif Central toward the SE.
ISSN: 0012-821X

insu-00150214
https://hal-insu.archives-ouvertes.fr/insu-00150214
https://hal-insu.archives-ouvertes.fr/insu-00150214/document
https://hal-insu.archives-ouvertes.fr/insu-00150214/file/Barruol_Granet_EPSL2002_hal.pdf
DOI : 10.1016/S0012-821X(02)00752-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The presence of two regional seismic networks in southeastern France provides us high-quality data to investigate upper mantle flow by measuring the splitting of teleseismic shear waves induced by seismic anisotropy. The 10 three-component and broadband stations installed in Corsica, Provence, and western Alps efficiently complete the geographic coverage of anisotropy measurements performed in southern France using temporary experiments deployed on geodynamic targets such as the Pyrenees and the Massif Central. Teleseismic shear waves (mainly SKS and SKKS) are used to determine the splitting parameters: the fast polarization direction and the delay time. Delay times ranging between 1.0 and 1.5 s have been observed at most sites, but some larger delay times, above 2.0 s, have been observed at some stations, such as in northern Alps or Corsica, suggesting the presence of high strain zones in the upper mantle. The azimuths of the fast split shear waves define a simple and smooth pattern, trending homogeneously WNW–ESE in the Nice area and progressively rotating to NW–SE and to NS for stations located further North in the Alps. This pattern is in continuity with the measurements performed in the southern Massif Central and could be related to a large asthenospheric flow induced by the rotation of the Corsica–Sardinia lithospheric block and the retreat of the Apenninic slab. We show that seismic anisotropy nicely maps the route of the slab from the initial rifting phase along the Gulf of Lion (30–22 Ma) to the drifting of the Corsica–Sardinia lithospheric block accompanied by the creation of new oceanic lithosphere in the Liguro–Provençal basin (22–17 Ma). In the external and internal Alps, the pattern of the azimuth of the fast split waves follows the bend of the alpine arc. We propose that the mantle flow beneath this area could be influenced or perhaps controlled by the Alpine deep penetrative structures and that the Alpine lithospheric roots may have deflected part of the horizontal asthenospheric flow around its southernmost tip.
ISSN: 0040-1951

hal-00109313
https://hal.archives-ouvertes.fr/hal-00109313
https://hal.archives-ouvertes.fr/hal-00109313/document
https://hal.archives-ouvertes.fr/hal-00109313/file/barruol_TGRS_Tphy2004_hal.pdf
DOI : 10.1016/j.tecto.2004.08.002

Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé :  
A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Holzforschung

hal-01032055
https://hal.archives-ouvertes.fr/hal-01032055
DOI : 10.1515/HF.2003.100

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x