Éditeur(s) : HAL CCSD
Résumé : Diffusion du document : INRA Antilles-Guyane, UMR ECOFOG, 97387 Kourou, Guyane (France) Diplôme : Master Recherche
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
La forêt tropicale guyanaise comporte entre 200 et 300 espèces d'arbres par hectare, alors qu'une forêt tempérée en compte environ une quinzaine. Les forêts tropicales humides sont des écosystèmes qui recèlent une des plus grandes biodiversités de la planète où les interactions entre les espèces et le milieu environnant atteignent des degrés de complexité élevés. Les arbres développent ainsi des stratégies souvent différentes, notamment celle du contrefil que nous avons cherché à décrire et à caractériser, lors de ce stage de Master 2ème année. Cette structure particulière du bois se retrouve dans une proportion importante dans les forêts tropicales. Elle consiste en une alternance d'hélices en S puis en Z de l'orientation longitudinale des fibres. Le stage s'est déroulé en grande partie en Guyane française, au sein de l'UMR « Ecologie des Forêts de Guyane » sur le site de Paracaïbo (Kourou). La première phase a été la prospection et la description du contrefil sur différentes espèces. Nous nous sommes ensuite intéressés au comportement mécanique en flexion statique et dynamique à différentes échelles. Enfin, au Laboratoire de Mécanique et Génie Civil de Montpellier, nous avons réalisé des mesures de l'angle des micros fibrilles afin de déterminer son évolution en fonction de l'angle du fil. Ainsi, prenant en compte les différentes échelles de description, nous avons mis au point un modèle permettant de prédire le comportement d'une poutre contre filée en flexion, connaissant la répartition du contrefil dans la section, la densité, et le module d'élasticité longitudinal orienté selon le fil du bois.
https://hal.archives-ouvertes.fr/hal-01189254

hal-01189254
https://hal.archives-ouvertes.fr/hal-01189254
PRODINRA : 19939

Éditeur(s) : HAL CCSD
Résumé :  
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood secimens were taken from the upper and lower sides of naturally titled trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend.At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-01032149
https://hal.archives-ouvertes.fr/hal-01032149

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called G-layer, in the fibre wall. The structure of G-layer has been recently described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2 to 50 nm). This led us to revisit the concept of G-layer that was until now only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with typical thick G-layer while it is much less with thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without G-layer is as low as in normal wood. Not depending on the amount of pores, the pore sizes distribution are always centred around 6-12 nm. These results suggest that, among species producing fibres with G-layer, large structural differences of G-layer exist between species
ISSN: 0022-0957

hal-00387861
https://hal.archives-ouvertes.fr/hal-00387861
DOI : 10.1093/jxp/erp133

Éditeur(s) : HAL CCSD
Résumé :  
The gelatinous layer (G-layer) of tension wood fibres in hardwood contributes to the mechanical function of the living tree and has significant consequences on properties of solid wood. Its size, shape and structure observed by optical or electron microscopy exhibits characteristic anatomical features. However, we found that sectioning of non-embedded wood samples results in an uncontrolled swelling of the G-layer was monitored by serial sections, from an embedded wood sample, from its trimmed transverse face to that located several hundreds of micrometers deep. The results revealed that the initial cutting before embedding produced a border effect responsible for the swollen nature, which is similar to sections from non-embedded material. After a conventional embedding technique was applied, a section of at least 30 micrometres below the trimming surface is required to observe an un-swollen G-layer.
IAWA Journal

hal-01032054
https://hal.archives-ouvertes.fr/hal-01032054

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A
Résumé :  
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called the G-layer, in the fibre cell wall. The structure of the G-layer has recently been described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2-50 nm). This led us to revisit the concept of the G-layer that had been, until now, only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with a typical thick G-layer while it is much less with a thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without a G-layer is as low as in normal wood. Not depending on the amount of pores, the pore size distribution is always centred around 6-12 nm. These results suggest that, among species producing fibres with a G-layer, large structural differences of the G-layer exist between species.
Journal of Experimental Botany

hal-01032161
https://hal.archives-ouvertes.fr/hal-01032161
DOI : 10.1093/jxb/erp133

Éditeur(s) : HAL CCSD
Résumé : Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rainforest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of the G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579
https://hal.archives-ouvertes.fr/hal-00112579/document
https://hal.archives-ouvertes.fr/hal-00112579/file/IAWA2006_ClairRuelleBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001136

Résumé : L’incorporation de sous-produits agricoles ou de matériaux naturels dans la matrice cimentaire confère des propriétés intéressantes aux composites élaborés. L’objectif de cette thèse est d’élaborer un matériau pouvant répondre aux exigences mécaniques, thermiques et de durabilité des matériaux de construction en zone tropicale humide. Dans un premier temps, l’activité pouzzolanique d’une pouzzolane naturelle, de cendres de tronc de bambou et de cendres de bagasse de canne à sucre ont été évaluées. L’influence de leur incorporation a été ensuite étudiée sur les propriétés mécaniques et la durabilité des mortiers exposés à des ions chlorures et sulfates. Dans un second temps, l’influence de l’ajout de fibres de bagasse sur les propriétés thermiques et mécaniques des composites a été étudiée en fonction de différents paramètres (teneur en fibres, environnement de vieillissement, type de matrice cimentaire).Les résultats obtenus ont permis de montrer que les matériaux étudiés possèdent une activité pouzzolanique et qu’il est possible de les incorporer au ciment afin de lutter contre la corrosion. De plus, les composites élaborés avec des fibres de bagasse sont plus isolants que ceux élaborés sans fibres. Cependant, du point de vue des propriétés mécaniques, l’incorporation de fibres de bagasse diminue les contraintes à la flexion des composites.
The incorporation of crop wastes or natural materials in the cement matrix confers interesting properties to composites prepared. The aim of this thesis is to develop a material that can reach the mechanical, thermal and durability requirements for building materials in the humid tropical zone. Firstly, pozzolanic activity of a natural pozzolan, bamboo stem and sugar cane bagasse ashes has been determined. Influence of their incorporation on mechanical properties and durability of mortars exposed to chloride and sulphate ions was studied. Secondly, influence of addition of bagasse fibers on thermal and mechanical properties of composites was studied as a function of various parameters (fibers content, curing, type of cement matrix).These results has shown that the materials studied have pozzolanic activity and it is possible to incorporate them into the cement to fight against corrosion. Moreover, composites elaborated with bagasse fibers are more insulating than those elaborated without fibers. However, from the viewpoint of mechanical properties, incorporation of bagasse fibers decreases flexural strength of composites in the present work and under the conditions producing procedures that were adopted.

http://www.theses.fr/2014AGUY0804/document

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
Growth strains were measured in situ in nine trees of three species from a French Guiana tropical rainforest in a clearly active verticality restoration process. The aim was to detect tension wood within the samples. Wood specimens were cut in the vicinity of the growth strain measurements in order to determine the microfibril angle and some mechanical and physical properties. As suspected, tensile growth strain was much higher in tension wood zones, as shown by the slightly higher longitudinal modulus of elasticity. Conversely, tension wood showed reduced compression strength. Longitudinal shrinkage was much higher in tension wood than in opposite wood. Clear relationships between the microfibril angle and longitudinal properties were noted in comparison (i) with those observed in gymnosperm compression wood and (ii) with expected relationships from the organization of wood fibres cell wall structure.
ISSN: 0043-7719

hal-01032114
https://hal.archives-ouvertes.fr/hal-01032114
DOI : 10.1007/s00226-010-0323-9

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option B
Résumé : International audience
To recover verticality after disturbance, angiosperm trees produce " tension wood " allowing them to bend actively. The driving force of the tension has been shown to take place in the G-layer, a specific unlignified layer of the cell wall observed in most temperate species. However, in tropical rain forests, the G-layer is often absent and the mechanism generating the forces to reorient trees remains unclear. A study was carried out on tilted seedlings, saplings and adult Simarouba amara trees – a species known to not produce a G-layer. Microscopic observations were done on sections of normal and tension wood after staining or observed under UV light to assess the presence/absence of lignin. We showed that S. amara produces a cell-wall layer with all of the characteristics typical of G-layers, but that this G-layer can be observed only as a temporary stage of the cell-wall development because it is masked by a late lignification. Being thin and lignified, tension wood fibres cannot be distinguished from normal wood fibres in the mature wood of adult trees. These observations indicate that the mechanism generating the high tensile stress in tension wood is likely to be the same as that in species with a typical G-layer and also in species where the G-layer cannot be observed in mature cells.
ISSN: 0829-318X

hal-01229280
https://hal.archives-ouvertes.fr/hal-01229280
https://hal.archives-ouvertes.fr/hal-01229280/document
https://hal.archives-ouvertes.fr/hal-01229280/file/Roussel-Clair-2015-TreePhysiol-LateLignifGLayerSimarouba_preprintHAL.pdf
DOI : 10.1093/treephys/tpv082

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background: Myosin II (or Myosin Heavy Chain II, MHCII) is a family of molecular motors involved in the contractile activity of animal muscle cells but also in various other cellular processes in non-muscle cells. Previous phylogenetic analyses of bilaterian MHCII genes identified two main clades associated respectively with smooth/non-muscle cells (MHCIIa) and striated muscle cells (MHCIIb). Muscle cells are generally thought to have originated only once in ancient animal history, and decisive insights about their early evolution are expected to come from expression studies of Myosin II genes in the two non-bilaterian phyla that possess muscles, the Cnidaria and Ctenophora. Results: We have uncovered three MHCII paralogues in the ctenophore species Pleurobrachia pileus. Phylogenetic analyses indicate that the MHCIIa /MHCIIb duplication is more ancient than the divergence between extant metazoan lineages. The ctenophore MHCIIa gene (PpiMHCIIa) has an expression pattern akin to that of ``stem cell markers'' (Piwi, Vasa...) and is expressed in proliferating cells. We identified two MHCIIb genes that originated from a ctenophore-specific duplication. PpiMHCIIb1 represents the exclusively muscular form of myosin II in ctenophore, while PpiMHCIIb2 is expressed in non-muscle cells of various types. In parallel, our phalloidin staining and TEM observations highlight the structural complexity of ctenophore musculature and emphasize the experimental interest of the ctenophore tentacle root, in which myogenesis is spatially ordered and strikingly similar to striated muscle formation in vertebrates. Conclusion: MHCIIa expression in putative stem cells/proliferating cells probably represents an ancestral trait, while specific involvement of some MHCIIa genes in smooth muscle fibres is a uniquely derived feature of the vertebrates. That one ctenophore MHCIIb paralogue (PpiMHCIIb2) has retained MHCIIa-like expression features furthermore suggests that muscular expression of the other paralogue, PpiMHCIIb1, was the result of neofunctionalisation within the ctenophore lineage, making independent origin of ctenophore muscle cells a likely option.
ISSN: 1471-2148

hal-01544486
https://hal.archives-ouvertes.fr/hal-01544486
DOI : 10.1186/1471-2148-12-107

Éditeur(s) : HAL CCSD
Résumé : Monitoring crustal deformation during the interseismic phase when searching for earth transients requires precise instruments able to operate for very long periods. The ANR-LINES project aimed to develop three new instruments: a single-axis seismometer, a hydrostatic long base tiltmeter and a borehole pendulum tiltmeter. These three instruments benefit of an extrinsic Fabry-Pérot interferometer (EFFPI) with long optic fibers for displacement detections. Their mechanical architectures and their disposal of long fibers help these newly manufactured geophysical instruments complete their goals. The first objective of this study is to propose appropriate methods for estimating the phase of the optical path in the Fabry-Pérot cavities. A modulation of the laser diode current, followed by a homodyne demodulation of the interference signal and a Kalman filter, allow determining the phase in real time. The results are convincingwhile taking short periods measurements but require additional solutions for protection against environmental phenomena variations. The EFFPI sensor integrated in the LINES borehole tiltmeter gives it the opportunity to establish a differential measurement of the bob's oscillation thanks to three Fabry-Perot cavities. The LINES seismometer also uses the EFFPI displacement sensor to measure its coil's displacement. A description of the two instruments' mechanical structures and an analysis of the detected phenomena (slow movements, tides, earthquakes, microseisms . . . ) are part of this thesis.
Le suivi de la déformation de la croûte terrestre durant la phase intersismique pour la recherche des transitoires nécessite des instruments précis capables d'opérer pour de très longues durées. Le projet ANR-LINES a visé le développement de trois nouveaux instruments : un sismomètre mono-axial, un inclinomètre hydrostatique à longue base et un inclinomètre de forage pendulaire. Ces trois instruments profitent d'un capteur interférométrique de déplacement à longues fibres optiques du type Fabry-Pérot Extrinsèque (EFFPI). Leurs architectures mécaniques et l'utilisation de longues fibres permettent à ces instruments géophysiques nouvellement fabriqués d'atteindre les objectifs fixés. Le premier objectif de cette étude est de proposer des méthodes adaptées à l'estimation de la phase du chemin optique dans les cavités Fabry-Pérot. Une modulation du courant de la diode laser, suivie par une démodulation homodyne du signal d'interférence et un filtre de Kalman permettent de déterminer la phase en temps réel. Les résultats sont convaincants pour des mesures de courtes durées mais exigent des solutions complémentaires pour se prémunir des effets de la variation des phénomènes environnementaux. Le capteur EFFPI intégré dans l'inclinomètre de forage LINES lui offre l'opportunité d'établir une mesure différentielle de l'oscillation de la masselotte pendulée grâce à trois cavités Fabry-Pérot. Le sismomètre LINES utilise lui aussi le capteur de déplacement EFFPI pour la mesure du déplacement de sa bobine. Une description de l'architecture mécanique de ces instruments et une analyse des phénomènes détectés (mouvements lents, marées, séismes, microséismes . . . ) font partie de cette thèse.
https://tel.archives-ouvertes.fr/tel-00779335

tel-00779335
https://tel.archives-ouvertes.fr/tel-00779335
https://tel.archives-ouvertes.fr/tel-00779335/document
https://tel.archives-ouvertes.fr/tel-00779335/file/Manuscript_Chawah.pdf

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : L’exploitation commerciale des produits forestiers non ligneux a animé et anime encore au plan international les débats sur la gestion durable des forêts, notamment par son apport en matière de conservation, d’amélioration des conditions d’existence des populations locales et de gestion participative. Cependant, l’exploitation commerciale des PFNL soulève la problématique de la durabilité tant au plan écologique, économique que sociopolitique. La présente recherche traite de cette problématique en prenant comme PFNL d’illustration le raphia dans la forêt marécageuse Hlanzoun. Elle vise à analyser la durabilité socio-économique et environnementale de l’exploitation du raphia dans la forêt marécageuse « Hlanzoun ». La méthodologie utilisée est une combinaison d’approches quantitatives et qualitatives. Les outils d’analyse de données utilisés sont entre autre, la statistique descriptive, l’analyse filière des revenus d’exploitation et des valeurs ajoutées et l’analyse du système socio-écologique. Nos résultats montrent que le raphia est une plante à usages multiples. Que ce soit les feuilles, les fibres, la sève ou le tronc, tout ou presque peut être valorisé sur le raphia. Au niveau des villages riverains du Hlanzoun l’exploitation de la sève du raphia et sa transformation en alcool alimentaire est de loin le type d’usage qui procure le plus de revenu malgré le fait que les autres types d’usages mobilisent un nombre plus important d’acteurs. L’exploitation commerciale de ce PFNL se déploie suivant une organisation relativement simple et avec des caractéristiques propres à la plupart des activités de la petite production marchande des économies sous-développées en crise. Cette exploitation est essentiellement articulée autour des coupeurs/collecteurs, des intermédiaires commerciaux, des agents de transformation/conditionnement et des consommateurs des produits finis. La contribution annuelle totale de la filière raphia au développement a été estimée à 192 429 633 Fr. CFA (environ 385 000 dollar) et les revenus d’exploitation de tous les acteurs ont un signe positif malgré le faible niveau de technologie et de formation. Le raphia apporte donc des revenus relativement importants aux divers acteurs en dépit des handicaps de la filière et du déficit d’équité dans la répartition des richesses produites. Au plan de la gouvernance, on note un déficit d’instances, de règles et de procédures, dont l’effectivité et la légitimité sont clairement établies. Cet état de chose laisse le parc à raphia dans un régime d’accès « libre » mais seulement pour les riverains ; nous nous retrouvons donc en présence d’un système de cueillette, caractérisé par l’exploitation de plants immatures et la surexploitation, mettant en péril la capacité de renouvellement de la ressource et même l’avenir de la filière. On note cependant un effort de contrôle de l’accès des non riverains et des tentatives d’adaptation des riverains. En effet, le nombre d’exploitants est passé de 148 à 92 entre 2008 et 2010 et le nombre de pieds de raphia saignés est passé de 15 452 à 8 832 durant la même période. Au total, l’exploitation du raphia dans le Hlanzoun s’inscrit dans un environnement défavorable par rapport aux exigences de développement durable d’une filière de PFNL. Mais les divers acteurs sont à présent conscients de la nécessité d’agir pour une meilleure réglementation de l’accès et de l’exploitation.
The commercial use of non woody forest products is a crucial issue in the international debate on the sustainable management of forests. These products are supposed to contribute to conservation by improving local populations’ livelihood and their involvement in forest management. This study lies within the scope of two South-South Cooperation projects (PSC 22P07 and PSC 03T08) implemented by the CEBEDES NGO with the financial support of the Kingdom of the Netherlands. It aims at analyzing the socioeconomic and environmental sustainability of the raffia stands management in the swamp forest "Hlanzoun ". This small forest is located in one of Benin southern Wetlands in the municipality of Zogbodomey.The methodology to assess raffia socioeconomic performances relies on the estimation of the values added within the raffia value chains. Stakeholders at every segment of the value chains have been surveyed on the incomes obtained out of raffia. The methodology to assess the sustainability of the management relies on a simple indicator measuring the ratio of younger to elder palms. Palms in stands have been counted according to their age group. The survey confirms that raffia is a multi-purpose plant used for its leaves, fibers, sap and trunk. In villages at the borders of the Hlanzoun forest, harvesting the raffia sap on standing palms and processing it into alcohol are a major income generating activity. Alcohol is then marketed through a network of collectors, wholesalers and petty traders up to the consumers. The contribution of raffia to local and regional development was estimated by the total incomes generated at 192.429.633 F CFA. All stakeholders earn positive and significant incomes in spite of the low level of technology and skills, but traders receive a large share of the wealth produced. As regard to governance, "free" access only concerns residents and efforts are made to control the access of non-residents. One notes a deficit of legitimated authorities, rules and procedures for a sustainable use: Restrictions on the harvest of immature palms are not anymore enforced and it endangers the renewal capacity of the resource. But at the same time, the number of operators seems to be decreasing (from 148 to 92 between 2008 and 2010, whereas the number of harvested raffia palms decreased from 15,452 to 8,832 during the same period). A self-regulation might occur, due to the fact that a livelihood of local people relies on a diversity of income generating activities. In total, the operation of Raffia in Hlazoun is in an unfavorable environment with the requirements of sustainable development in a sector of NTFF. But the various actors are now aware of the need for action to better regulate access and operation.
Bénin

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.5556
http://journals.openedition.org/etudescaribeennes/5556

Éditeur(s) : HAL CCSD
Résumé : International audience
Understand the dynamics of the fresh-salt water interface in aquifers is a key issue to comprehend mixing processand to quantity the discharge of nutrients in to coastal areas. In order to go beyond the current knowledge inthis issue an experimental site has been set up at the alluvial aquifer Riera Argentona (Barcelona – Spain). Thesite comprises 16 shallow piezometers installed between 30 and 90 m from the seashore, with depths rangingbetween 15 and 25 meters. The seawater interface is being monitored using several techniques, the combinationof which will help us to understand the spatial and temporal behaviour of the mixing zone and the geochemicalprocesses occurring there. Specially the deepest piezometers are equipped with electrodes in order to performcross-hole electrical resistivity tomography (CHERT). In addition, all piezometers are also equipped with FiberOptic cable to perform distributed temperature measurements. Two single steel armoured fibre optic cable lines ofaround 600m length were installed in all boreholes. The objective is to use the cable both as passive and activetemperature sensor. The first is being done for the continuous monitoring of temperature whereas; the secondprovides a higher temperature resolution used to monitor field experiments.Periodic CHERT measurements are carried out between the piezometer equipped with electrodes, resultingin parallel and perpendicular vertical cross sections of the site resistivity. The position of the fresh-salt waterinterface can be identified due to the resistivity contrast between the saline and fresh water. Preliminary resultsof periodic distributed temperature measurements will be also be used to monitor the position of the mixing zonethanks to the contrast and seasonal temperature changes. Periodic down-hole EC profiles will be used to validatethe method.AcknowledgementsThis work was funded by the projects CGL2013-48869-C2-1 y CGL2013-48869-C2-2-R of the Spanish Government.We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the ConsellComarcal del Maresme in the construction of the research site
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308757
https://hal-insu.archives-ouvertes.fr/insu-01308757

Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé : absent
Holzforschung

hal-01031939
https://hal.archives-ouvertes.fr/hal-01031939
DOI : 10.1515/HF.2005.057

Résumé : Arbol de hasta 20 m de altura. Hojas opuestas, elípticas a elíptico-aovadas, de 8 a 16 cm, coriáceas, rígidas y brillantes, redondeadas en el ápice. Flores solitarias, axilares, frangantes; cáliz de 8 a 10 mm; pétalos blancos, obovados, de hasta 2 cm. Drupa globosa, apiculada, de 5 a 8 cm de diámetro, con mesocarpo amarillo o rojizo, dulce, con pocas semillas.
Arbre pouvant atteindre 20 m de haut. Feuilles opposées, elliptiques à elliptico-ovées, de 8 à 16 cm, coriaces, rigides et brillantes, arrondies à la pointe. Fleurs solitaires, polygames axillaires, odorantes; calice de 8 à 10 mm; pétales blancs, ovoïdes, pouvant atteindre 2 cm. Drupe en forme de globe, apiculée, de 5 à 8 cm de diamètre, avec mésocarpe jaune ou rougeâtre, sucré, avec peu de graines.
Tree, up to 20 m high.  Leaves opposite, 8-25 cm x 10 cm, elliptic to obovate, glossy, dark green with pellucid dots, exuding a milky sap when broken; Flowers axillary, solitary or few together, fragrant, with white obovate petals ca. 20 mm long; fruit a globose drupe ca. 15 cm in diameter, skin rough, brown and thick; seeds 1-4 fibrous coated stone embedded in sweet, yellow pulp.
Originaria de América tropical y las Antillas, comúnmente cultivada en los trópicos.
Originaire de l’;Amérique tropicale et des Antilles, habituellement cultivée sous les tropiques.
Native to tropical America and the Antilles, commonly cultiva

http://www.tramil.net/fototeca/plant219

Résumé : Planta perenne con raíces gruesas. Culmos cilíndricos gruesos, de hasta 1 m de alto, huecos, septados. Espiguillas cilíndricas, de hasta 5 cm, con muchas flores; glumas subcartilaginosas, nervadas, obovadas u oblongas con márgenes escariosos; estambres 3, estilo 2 a 3 dividido. Aquenios biconvexos, amarillos, pardos o grises.
Plante pérenne avec de grosses racines. Extrémités cylindriques épaisses, pouvant atteindre 1 m de haut, creuses, présentant sept éléments. Petits épis cylindriques, pouvant atteindre 5 cm, avec de nombreuses fleurs; glumes subcartilagineuses, avec nervures, ovées ou oblongues à bords scarieux; étamines 3, style 2 à 3 divisé. Akènes biconvexes, jaunes, bruns ou gris.
Perennial, stoloniferous plant, with fibrous roots.  Culms tufted 40-100 cm tall 3.6 mm thick, cylindrical, hollow, transversely septate; spikelets cylindrical, up to 6 cm long x 5-7 mm wide; glumes straw-coloured, oblong to obovate 4-5 mm x 3 mm; stamens 3, style 3-fid.  Achenes oval to obovate 1.5-2 mm long, biconvex, slightly shiny, brownish-yellow.
Pantropical, común en terrenos húmedos.
Pantropicale, commune en terrains humides.
Pantropical, growing in swampy areas.

http://www.tramil.net/fototeca/plant163

Éditeur(s) : HAL CCSD
Résumé :  
The main aspects of wood mechanics are approached through the role played by wood as the building material of the tree. The main concepts used by nature: progressive setting up of tree weight and architecture, multifunctional role of wood and adaptability to hazard and long-term evolution, are clarified together with their consequence on the multilayered, anisotropic nature of wood. The technological choices of the plant world as the cellular structure, the use of composite with oriented fibres and hydro-carbonated polymers, as well as the systematic prestressing of every new layer, bear obvious consequences on the type of mechanical behaviour of wood. The local control of the level of prestressing through minor modifications of the cell-wall biosynthesis allows the tree to adapt to conditions of light exploration that will evolve according to time and risk occurrence. This analysis of wood genesis process permits in return to improve our understanding of the mechanical behaviour of the material in relation with the parameters of the microstructure.
Comptes Rendus de l'Académie des Sciences Série 2

hal-01032151
https://hal.archives-ouvertes.fr/hal-01032151
DOI : 10.1016/S1620-7742(01)01380-0

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
The extinct Odontopterygiformes are the sole birds known to possess strong and sharp bony pseudoteeth, the shape and location of which are closely mimetic of real teeth. The structure of the pseudoteeth is investigated here in a late Pliocene/early Pleistocene species, Pelagornis mauretanicus, using X-ray microtomography and thin sections. The results are interpreted with regard to the pseudotooth mode of growth, and have implications concerning aspects of Pelagornis ecology. The larger pseudoteeth are hollow and approximately cone-shaped, and the smaller ones are rostro-caudally constricted. The walls of pseudoteeth are composed of bone tissue of the fibro-lamellar type, which is intensively remodeled by Haversian substitution. The jaw bones display the same structure as the pseudoteeth, but their vascular canals are oriented parallel to the long axis of the bones, whereas they are perpendicular to this direction in the pseudoteeth. There is no hiatus or evidence of a fusion between the pseudoteeth and the jaw bones. Two possible models for pseudotooth growth are derived from the histological data. The most plausible model is that pseudotooth growth began after the completion of jaw bone growth, as a simple local protraction of periosteal osteogenic activity. Pseudotooth development thus occurred relatively late during ontogeny. The highly vascularized structure and the relative abundance of parallel-fibered bone tissue in the pseudoteeth suggest poor mechanical capabilities. The pseudoteeth were most likely covered and protected by the hardened, keratinized rhamphotheca in the adult during life. The late development of the pseudoteeth would involve a similarly late and/or partial hardening of the rhamphotheca, as displayed by extant Anseriformes, Apterygiformes and some Charadriiformes. This would add support to the hypothesis of a close phylogenetic relationship between Odontopterygiformes and Anseriformes. The late maturation of the Pelagornis feeding apparatus, and hence the delayed capability for efficient prey catching, suggests that Pelagornis was altricial.
ISSN: 1932-6203

hal-01545486
https://hal.archives-ouvertes.fr/hal-01545486
DOI : 10.1371/journal.pone.0080372

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
The vibration damping coefficient (tanδ) of wood is an important property for acoustical uses, including musical instruments. Current difficulties in the availability of some of the preferred species call for diversification, but this comes up against the lack of systematic damping coefficient data. * Keeping in mind the possible factors affecting tanδ, could we predict its variations between species, by using indicators that are either easily measured and/or readily available for many species? * Vibrational properties, equilibrium moisture content and colorimetric parameters were assessed on 94 wood types belonging to 76 species. Experimental results were then related to data on chemical contents and physical properties from the CIRAD database. The "standard" relationship between tanδ and specific modulus of elasticity (E'/ρ) explained only half of the variations. Deviations from this trend were correlated to extractives content, yet effects were not directly quantitative. Damping deviations were also correlated to colour and moisture-related properties, especially so with fibre saturation point. * By taking into account a combination of moisture-related properties, colour - or extractives content, and the "standard" relationship between tanδ and E'/ρ, we could propose simple predictive models which explain up to 89% of observed variations in tanδ between 48 species.
ISSN: 1286-4560

hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338/document
https://hal.archives-ouvertes.fr/hal-00808338/file/Physico-chemical_indicators_Bremaud_al.pdf
DOI : 10.1051/forest/2010032

Éditeur(s) : HAL CCSD Wiley-VCH Verlag
Résumé : International audience
Proteomic profiling plays a decisive role in the elucidation of molecular signatures representative of a specific clinical context. MuStem cell-based therapy represents a promising approach for clinical applications to cure Duchenne Muscular Dystrophy (DMD). To expand our previous studies collected in the clinically relevant DMD animal model, we decided to investigate the skeletal muscle proteome four months after systemic delivery of allogenic MuStem cells. Quantitative proteomics with isotope-coded protein labelling (ICPL) was used to compile quantitative changes in the protein expression profiles of muscle in transplanted Golden Retriever Muscular Dystrophy (GRMD) dogs as compared to GRMD dogs. A total of 492 proteins were quantified, including 25 that were overrepresented and 46 that were underrepresented after MuStem cell transplantation. Interestingly, this study demonstrates that somatic stem cell therapy impacts on the structural integrity of the muscle fascicle by acting on fibres and its connections with the extracellular matrix. We also show that cell infusion promotes protective mechanisms against oxidative stress and favours the initial phase of muscle repair. This study allows us to identify putative candidates for tissue markers that might be of great value in objectively exploring the clinical benefits resulting from our cell-based therapy for DMD.
ISSN: 1615-9853

Droits : info:eu-repo/semantics/OpenAccess
hal-01332030
https://hal.archives-ouvertes.fr/hal-01332030
https://hal.archives-ouvertes.fr/hal-01332030/document
https://hal.archives-ouvertes.fr/hal-01332030/file/Quantitative%20proteome%20profiling%20of%20dystrophic%20dog%20skeletal%20muscle_accepted.pdf
DOI : 10.1002/pmic.201600002