Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Joint inversions are now commonly used in the earth sciences. They have been developed to better understand the structure of the earth, since they provide more constraints on the inverted parameters. We propose a new process to simultaneously invert several data sets in order to better image 3D crustal and upper mantle structures. Our inversion uses three kinds of data that present good complementarity: (1) P-wave receiver functions to provide Moho depth variations, (2) teleseismic delay times of P-waves to retrieve velocity anomalies in the crust and the upper mantle, and (3) gravity anomalies to image density variations at the lithospheric scale. We use a stochastic scheme, where receiver functions are first inverted. The interpolated resulting Moho depths are incorporated as a priori information into the joint inversion of teleseismic delay times and gravity anomalies process. Moreover, velocity and density can be linked by empirical relationships, which justifies the joint inversion of those parameters. In our stochastic approach, we perform a model space search for Moho variations, P-velocity, and density structure to find an acceptable fit to the three data sets. In order to preferentially sample the good data fit regions, we chose the neighborhood algorithm of Sambridge to optimistically survey the model space. We model the delay times with 3D raytracing using evenly spaced velocity-density nodes. We present here the first results given by this method on synthetic tests. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0098-3004

hal-00643158
https://hal.archives-ouvertes.fr/hal-00643158
DOI : 10.1016/j.cageo.2010.11.017

Résumé : Depuis les années soixante-dix, l’Ifremer réalise les suivis écologique et halieutique des centrales nucléaires implantées sur le littoral maritime, tel que définis dans les arrêtés interministériels. Des changements dans les stratégies de suivi ont été déjà mis en place au moment du passage de la phase de projet à celle de la surveillance, ainsi que dans les années 90, suite à une réflexion sur la pertinence des stratégies qui comptaient déjà une dizaine d’années. La demande EDF d’installer une nouvelle tranche de production à Flamanville mène à demander un changement dans l’arrêté actuel de rejets. Une étude rétrospective des résultats obtenus et de l’évolution du milieu nous permettra de statuer sur le bien-fondé des stratégies actuelles et de les adapter le cas échéant. Le tableau 1 présente une synthèse des paramètres suivis en 2006 en accord avec les arrêtés de rejets thermiques et chlorés. Un tableau de synthèse, réunissant l’ensemble des changements préconisés est présenté à la fin de ce document en annexe.

Droits : 2007 Ifremer
http://archimer.ifremer.fr/doc/00004/11501/8071.pdf
http://archimer.ifremer.fr/doc/00004/11501/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Oxidative stress and haemolysis-associated nitric oxide (NO) depletion plays a crucial role in the development of vasculopathy in sickle cell anaemia (SS). However it remains unknown whether oxidative stress and haemolysis levels influence vascular function in patients with sickle haemoglobin C disease (SC). Microvascular response to heat (using Laser Doppler flowmetry on finger), oxidative stress biomarkers, NO metabolites, endothelin-1 and haematological parameters were compared between patients with SS and SC. Vascular function, oxidative and nitrosative markers were also measured in healthy (AA) children. SS and SC had increased plasma advanced oxidation protein products (AOPP), malondialdehyde, plasma antioxidant activities and NO end products, compared to AA. SC had lower catalase activity compared to AA and SS. Haemolytic rate, glutathione peroxidase and nitrotyrosine concentrations were significantly increased in children with SS compared to SC and AA. SS and SC had impaired microvascular reactivity compared to AA. In SS, the plateau phase of the response to local thermal heating was negatively associated with nitrotyrosine and AOPP. No association between vascular function parameters and oxidative stress markers was observed in SC. Mild haemolysis in SC, compared to SS, may limit oxidative and nitrosative stress and could explain the better preserved microvascular function in this group.
ISSN: 0007-1048

hal-01668314
https://hal.univ-antilles.fr/hal-01668314
DOI : 10.1111/bjh.14693

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Objectives To investigate the association between priapism in men with sickle cell anemia (SCA) and hemorheological and hemolytical parameters. Materials and Methods Fifty-eight men with SCA (median age: 38 years) were included; 28 who had experienced priapism at least once during their life (priapism group) and 30 who never experienced this complication (control group). Twenty-two patients were treated with hydroxycarbamide, 11 in each group. All patients were at steady state at the time of inclusion. Hematological and biochemical parameters were obtained through routine procedures. The Laser-assisted Optical Rotational Cell Analyzer was used to measure red blood cell (RBC) deformability at 30 Pa (ektacytometry) and RBC aggregation properties (laser backscatter versus time). Blood viscosity was measured at a shear rate of 225 s(-1) using a cone/plate viscometer. A principal component analysis was performed on 4 hemolytic markers (i.e., lactate dehydrogenase (LDH), aspartate aminotransferase (ASAT), total bilirubin (BIL) levels and reticulocyte (RET) percentage) to calculate a hemolytic index. Results Compared to the control group, patients with priapism exhibited higher ASAT (p = 0.01), LDH (p = 0.03), RET (p = 0.03) levels and hemolytic indices (p = 0.02). Higher RBC aggregates strength (p = 0.01) and lower RBC deformability (p = 0.005) were observed in patients with priapism compared to controls. After removing the hydroxycarbamide-treated patients, RBC deformability (p = 0.01) and RBC aggregate strength (p = 0.03) were still different between the two groups, and patients with priapism exhibited significantly higher hemolytic indices (p = 0.01) than controls. Conclusion Our results confirm that priapism in SCA is associated with higher hemolytic rates and show for the first time that this complication is also associated with higher RBC aggregate strength and lower RBC deformability.
ISSN: 1932-6203

hal-01390971
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01390971
DOI : 10.1371/journal.pone.0154866
PUBMED : 27145183

Éditeur(s) : HAL CCSD Springer/Terra Scientific Publishing Company
Résumé : International audience
This study of the Cajati deposit provides evidence that the ore was neither purely hydrothermal, nor volcanic in origin, as previous workers have proposed. The ores were formed from magnetite-rich magmas, hydrothermally altered and intruded at an indicated crustal depth in excess of 500 m. The mineralogical and textural association between magnetite and magnesioferrite in the carbonatite, and between the titanomagnetite and magnesioferrite-Ti mineralization in the pyroxenite of hedenbergite, seems to be analog mineralizations strongly related to the ionic substitution of Fe2+ by Mg. Relatively high Q ratios (>= 5) for Jacupirangite-pyroxenite may indicate a thermo remanent magnetization (TRM) by the ore during post-metamorphic cooling, however it call also be developed from chemical remanent magnetization (CRM). Vector plots for the pyroxenite samples show reasonably linear and stable magnetic components. The intensity decay Curves show that only two components of magnetizations are likely present. Continuous susceptibility measurements with increasing temperature show that the main magnetic phase seems to be magnetite. Maghemite is probably produced during the cooling process. Susceptibility recorded from low temperature (liquid nitrogen (- 196 degrees C)) to room temperature produces typical Curves. indicating Verwey transition of magnetite. Hysteresis parameters point Out that nearly all values fill in a novel region of the Day plot, parallel to but below magnetite SD + MD mixing curves.
ISSN: 1343-8832

hal-00420922
https://hal.archives-ouvertes.fr/hal-00420922

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Plio-Pleistocene diatomitic sequences in the Shamb paleo-lake (South Armenia, Lesser Caucasus) offer a rare opportunity to give new insights on the paleo-climate of Western Asia. We present an integrated palynological, 40Ar/39Ar geochronologic and magnetostratigraphic study for the most complete section in the sedimentary deposits of the Shamb paleo-lake. 40Ar/39Ar dating of two volcaniclastic layers provided ages of 1.24 ± 0.03 and 1.16 ± 0.02 Ma (2. Magnetostratigraphic data show that the entire Shamb section is of reversed polarity which, combined with 40Ar/39Ar dating, suggests that the entire section correlates with part of the Matuyama period (1.785-1.070 Ma). Pollen assemblages and macroremains diversity clearly show an alternation of glacial and interglacial phases. Age calibrations and accumulation rate extrapolation allow a direct correlation of climate changes with the global isotopic curve, and show that the Shamb section probably ranges from approximately 1.300 to 1.080 Ma (marine isotopic stages 40 to 31). The vegetation of the Lesser Caucasus developed in a mosaic pattern in a Pleistocene continental, mostly arid climate, comparable to the present-day climate. The observed vegetation changes record a dominant climate response to the obliquity orbital parameter, but the influence of precession could not be established from the Shamb data. Pollen and macroflora both indicate that glacial periods were cold and dry and that interglacials were warm with local humidity. The early Pleistocene climatic model for Western Asia is thus similar to the climatic model for the Mediterranean area.
ISSN: 0012-821X

hal-00470353
https://hal.archives-ouvertes.fr/hal-00470353
DOI : 10.1016/j.epsl.2010.01.007

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The reactivation of faults with near-optimal orientations is commonly considered to control the state of stress in the crust. Near the surface, where a principal stress direction is vertical, the attitude of such faults is explained by Anderson's theory. This raises the questions of how prevalent this type of faulting actually is in current seismicity, down to what depth it frequently occurs, and what range of friction angles explains it best. The Global Centroid Moment Tensor catalog is analyzed to address these questions. Dip-slip and strike-slip mechanisms are dominant, and oblique slips are relatively rare for well-constrained events with depths shallower than 30 km. Preferred Andersonian faulting is the simplest, but not the unique, explanation for this dominance. Isolating reverse, strike- slip, and normal events reveals an asymmetry in the distribution of nodal plane dips and plunges of the P, B, and T axes between reverse and normal faulting. Assuming that the most frequent events correspond to reactivation near optimal orientations yields 40-60 degrees and 0-20 degrees friction angles for reverse and normal faults, respectively. This indicates that reverse and normal faulting mechanics are not symmetrical with respect to stress configuration as predicted by Anderson's theory.
ISSN: 8755-1209

hal-00412159
https://hal.archives-ouvertes.fr/hal-00412159
DOI : 10.1029/2007RG000240

Résumé : Les méthodes classiques d'analyse d'images satellites sont inadaptées au volume actuel du flux de données. L'automatisation de l'interprétation de ces images devient donc cruciale pour l'analyse et la gestion des phénomènes observables par satellite et évoluant dans le temps et l'espace. Ce travail vise à automatiser la cartographie dynamique de l'occupation du sol à partir d'images satellites, par des mécanismes expressifs, facilement interprétables en prenant en compte les aspects structurels de l'information géographique. Il s'inscrit dans le cadre de l'analyse d'images basée objet. Ainsi, un paramétrage supervisé d'un algorithme de segmentation d'images est proposé. Dans un deuxième temps, une méthode de classification supervisée d'objets géographiques est présentée combinant apprentissage automatique par programmation logique inductive et classement par l'approche multi-class rule set intersection. Ces approches sont appliquées à la cartographie de la bande côtière Guyanaise. Les résultats démontrent la faisabilité du paramétrage de la segmentation, mais également sa variabilité en fonction des classes de la carte de référence et des données d'entrée. Les résultats de la classification supervisée montrent qu'il est possible d'induire des règles de classification expressives, véhiculant des informations cohérentes et structurelles dans un contexte applicatif donnée et conduisant à des valeurs satisfaisantes de précision et de KAPPA (respectivement 84,6% et 0,7). Ce travail de thèse contribue ainsi à l'automatisation de la cartographie dynamique à partir d'images de télédétection et propose des perspectives originales et prometteuses.
Classical methods for satellite image analysis are inadequate for the current bulky data flow. Thus, automate the interpretation of such images becomes crucial for the analysis and management of phenomena changing in time and space, observable by satellite. Thus, this work aims at automating land cover cartography from satellite images, by expressive and easily interpretable mechanism, and by explicitly taking into account structural aspects of geographic information. It is part of the object-based image analysis framework, and assumes that it is possible to extract useful contextual knowledge from maps. Thus, a supervised parameterization methods of a segmentation algorithm is proposed. Secondly, a supervised classification of geographical objects is presented. It combines machine learning by inductive logic programming and the multi-class rule set intersection approach. These approaches are applied to the French Guiana coastline cartography. The results demonstrate the feasibility of the segmentation parameterization, but also its variability as a function of the reference map classes and of the input data. Yet, methodological developments allow to consider an operational implementation of such an approach. The results of the object supervised classification show that it is possible to induce expressive classification rules that convey consistent and structural information in a given application context and lead to reliable predictions, with overall accuracy and Kappa values equal to, respectively, 84,6% and 0,7. In conclusion, this work contributes to the automation of the dynamic cartography from remotely sensed images and proposes original and promising perpectives

http://www.theses.fr/2013AGUY0671/document

Éditeur(s) : HAL CCSD IOS Press
Résumé : The main objectives of the present work were to test the effects of heat stress on blood rheology and to determine whether the responses can change according to the pig breeds. Thirty-six pigs from three pig's lines (n = 12 for each line) with assumed different tolerance to heat stress were compared: Large White (LW, little tolerance), Creole (CR, good tolerance) and LW × CR pigs (produced from a cross between LW and CR lines). In a first period, all pigs were exposed to a 9-d period of thermo-neutral environment (24°C; d-9 to d-1; P0). At the end of P0, six pigs from each line were slaughtered (n = 18). Then in a second period, the remaining pigs (6/breed; n = 18) were exposed to a 5-d period of heat stress (32°C; d + 1 -d + 5; P1) and thereafter slaughtered at d + 5. Rectal and skin temperatures, as well as respiratory rate, were recorded on d-1 and d + 5. At slaughter, blood was sampled for hematological and hemorheological measurements. Heat stress caused a rise of the skin temperature and respiratory rate without any changes in the rectal temperature or on the hematological and hemorheological parameters when all pigs' lines were considered. We observed a pig line effect on blood viscosity at high shear rate (375 s-1) and red blood cell deformability at 30 Pa with CR pigs having lower blood viscosity and higher red blood cell deformability than LW pigs. While the changes of blood viscosity under heat stress did not reach statistical significance in LW and CR lines, blood viscosity (at 375 s-1) increased above the temperate values in the LW × CR line. Red blood cell deformability at 30 Pa was higher in CR pigs exposed to heat stress compared to LW pigs in the same condition. In conclusion, thermal loading caused physiological stress but did not widely change the hematological and hemorheological profiles. Although some blood rheological parameters seem to vary with the pig breeds, the responses to heat stress are very similar.
ISSN: 1386-0291

hal-01210926
https://hal.archives-ouvertes.fr/hal-01210926
DOI : 10.3233/CH-131722
PRODINRA : 286489
PUBMED : 23603327

Éditeur(s) : HAL CCSD
Résumé : Point processes are often used as spatial or spatio-temporal distribution models of occurrences. In this PhD dissertation, we focus first on Cox processes driven by a hidden process associated with a Dirichlet process. This model corresponds to hidden occurrences influencing the stochastic intensity of observed occurrences. We generalize the notion of "Shot noise Cox process" introduced by M{o}ller and develop its bayesian analysis by a Gibbs sampler combined with a Metropolis-Hastings algorithm. We show that our MCMC method is a reversible jump one. The model takes into account a random number of hidden contributions producing effects on the observed point process intensity. Therefore the parameter space has a variable dimension. We focus the statistical inference on the estimation of the hidden contribution expected value, the hidden contribution expected number, the spatial influence and correlation parameters. The contribution equality test and contribution independence test are proposed. Applications in epidemiology and ecology are shown from extit{Rubus fruticosa} data, extit{Ibicella lutea} data and death number data in counties of Georgia, USA. Two situations are considered with respect to available data~: firstly, the spatial positions of occurrences are observed between several pairs of consecutive dates; secondly, counts are carried out over a fixed time interval in several spatial sampling units. Secondly, we focus on point processes with memory introduced by Kagan, Ogata and Vere-Jones, pioneers in statistical seismology. In fact, spatio-temporal point processes play an important role in the studies of earthquake catalogs since they consist of seismic events with their dates and spatial locations. We studied an ETAS (Epidemic Type Aftershock Sequence) model with time independent background intensity and several triggering functions taking into account previous events. We illustrate our approach with a seismicity study of the Lesser Antilles arc. A comparaison study of Gamma, Weibull, Log-Normal and modified Omori law triggering function models is also carried out. We show that the modified Omori law does not fit the Lesser Antilles seismic data and the best adjusted triggering function is the Weibull model. Consequently, the waiting time between aftershocks is weaker in the Lesser Antilles zone compared to the one in regions with seismicity described by the modified Omori law. In other words, aftershock aggregativity is higher in the Lesser Antilles region. The stochastic background intensity following a Dirichlet process centered on a spatial log-normal process is discussed.
Les processus ponctuels sont souvent utilisés comme modèles de répartitions spatiales ou spatio-temporelles d'occurrences. Dans cette thèse, nous nous intéressons tout d'abord à des processus de Cox dirigés par un processus caché associé à un processus de Dirichlet. Ce modèle correspond à des occurrences cachées influençant l'intensité stochastique des occurrences observées. Nous généralisons la notion de " Shot noise Cox process " introduite par Moller et développons le traitement bayésien par un échantillonneur de Gibbs combiné à un algorithme de Metropolis-Hastings. Nous montrons que cette méthode MCMC est à sauts réversibles. Le modèle prend en compte, en effet, un nombre aléatoire de contributions cachées influençant l'intensité du processus ponctuel observé donc a un espace paramétrique de dimension variable. Nous focalisons l'inférence statistique sur l'estimation de la valeur espérée de chaque contribution cachée, le nombre espéré de contributions cachées, le degré d'influence spatiale de ces contributions et leur degré de corrélation. Le test d'égalité des contributions et celui de leur indépendance sont ainsi développés. L'utilité en épidémiologie et en écologie est alors démontrée à partir de données de Rubus fruticosa, Ibicella lutea et de mortalité dans les cantons de Georgia, USA. En termes de données observées, deux situations sont considérées: premièrement, les positions spatiales des occurrences sont observées entre plusieurs paires de dates consécutives; deuxièmement, des comptages sont effectués, au cours d'une période fixée, dans des unités d'échantillonnage spatiales. D'autre part, nous nous intéressons aux processus ponctuels à mémoire introduits par Kagan, Ogata et Vere-Jones, précurseurs de la statistique sismologique. En effet, les processus ponctuels spatio-temporels ont une place importante dans l'étude des catalogues sismiques puisque ces derniers sont généralement constitués d'événements sismiques datés et géo-référencés. Nous avons étudié un modèle ETAS (Epidemic Type Aftershock Sequence) avec une intensité d'arrière-plan indépendante du temps et plusieurs fonctions déclenchantes permettant d'intégrer les événements antérieurs récents. Cette approche est utilisée pour étudier la sismicité de l'arc des Petites Antilles. Une étude comparative des modèles Gamma, Weibull, Log-Normal et loi d'Omori modifiée pour les fonctions déclenchantes est menée. Nous montrons que la loi d'Omori modifiée ne s'ajuste pas aux données sismiques des Petites Antilles et la fonction déclenchante la plus adaptée est le modèle de Weibull. Cela implique que le temps d'attente entre répliques dans la zone des Petites Antilles est plus faible que celui des régions à sismicité décrite par la loi d'Omori modifiée. Autrement dit, l'agrégation des répliques après un événement majeur est plus prononcée dans la zone des Petites Antilles. La possibilité d'inclure une intensité d'arrière-plan suivant un processus de Dirichlet centré sur un processus spatial log-gaussien est discutée.
https://tel.archives-ouvertes.fr/tel-00841146

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2012AGUY0555
tel-00841146
https://tel.archives-ouvertes.fr/tel-00841146
https://tel.archives-ouvertes.fr/tel-00841146/document
https://tel.archives-ouvertes.fr/tel-00841146/file/these_VALMY.pdf

Éditeur(s) : Blackwell science
Résumé : An experiment was conducted in six earthen ponds with 20 shrimps m(-2) Litopenaeus stylirostris (Stimpson) during the warm season in New Caledonia to study the dynamics of wastes in relation with water exchange rate (WER). The nitrogen budget was established, taking into account the different forms of nitrogen in the water, sediment, feed and shrimp. Data from a wide range of treatments applied in unreplicated ponds were treated using regression analysis to establish the relationship between WER and partial nitrogen budget, sediment characteristics and shrimp performance. To compare effluent quality between treatments during the season, data were analysed using the non-parametric sign test. The water outflow was characterized by a decrease in the concentrations of N-mineral forms (TAN, NO2--NO3-), an increase in the concentration of organic soluble and sestonic organic forms (expressed in terms of particulate nitrogen, particulate organic carbon, chlorophyll a) compared with the water inflow. Increasing WER increased the amount of exported wastes and mainly in the organic forms and TAN can be considered as negligible. The nitrogen budget showed that 19-46% of nitrogen input (feed+water) was exported into the coastal environment. The results showed that the quality of the sediment decreased as WER decreased. The potential negative impact of the developing industry in New Caledonia on the costal environment could be partially reduced in a first step by decreasing WER. However, if applied in the farms, this practice should be linked to a close survey of the evolution of sediment quality.
Aquaculture Research (1355-557X) (Blackwell science), 2006-06 , Vol. 37 , N. 9 , P. 938-948

Droits : 2006 Blackwell Publishing, Inc.
http://archimer.ifremer.fr/doc/2006/publication-1811.pdf
DOI:10.1111/j.1365-2109.2006.01515.x
http://archimer.ifremer.fr/doc/00000/1811/

Résumé : in mollusc hatcheries. Consequently, we assessed themost commonly used species to establish their growth and size profiles, their cytomorphological, biochemical, biomolecular identification as well as their cytometer signs, and also their ability to grow under extreme conditions of temperature and salinity. This work aimed at matching the conformity of the strains used in Argenton (dispatched to most of the French commercial hatcheries) to those of a referenced culture collection. A previous screening preceded this study, because of the 45 species and/or clones held originally, Argenton kept no more than 15 species. As most of the latter are also represented in referenced collection, our strains are therefore correctly identified. On the other hand, the combination of several approaches (characteristic of growth and size, cytomorphological description, establishment of biochemical and biomolecular profiles) to discriminate the different species was broadly successful. Nevertheless, flow cytometer measurements were extremely variable from sample to sample, dueto their high sensitivity to the microalga's physiological state. Accordingly, we have developed a method of identification which could be transferred at a national or international level, to the Institutions in charge of microalgae collections. Furthermore, we achieved relevant data to establish an identity card for each of the microalgae suitable for mollusc hatcheries.
La caractérisation des microalgues fourrage constituait l'un des points perfectibles au regard de ce qui est appliquée en microbiologie. Nous avons alors cherché à définir, pour les espèces les plus utilisées en écloserie, leurs profils de croissance et de taille, leur caractéristiques cytomorphologique, cytofluorimétrique, biochimique et biomoléculaire, et enfin, précisé leur aptitude au développement sous des conditions extrêmes de température et de salinité (écotolérance). Ce travail avait pour but de vérifier, d'une part, la conformité des souches utilisées à l'écloserie d'Argenton (auprès de laquelle se fournissent la plupart des écloseries commerciales françaises) en comparant les espèces utilisées à celles issues d'une collection référencée. Un premier balayage avait été réalisé avant la mise en place de cette étude puisque sur les 45 espèces et clones détenus originellement, Argenton ne possédait plus que 15 espèces. La plupart de ces dernières ayant leur équivalent en collection référencée notre souchier est désormais parfaitement identifiée. D'autre part, la confrontation de plusieurs approches, caractéristique de la croissance et de taille, description cytomorphologique, établissement des profils biochimique et biomoléculaire, écotolérance, signature cytofluorimétrique, pour discriminer les différentes espèces de microalgues fourrage a été globalement couronnée de succès. Seule cette dernière technique n'a pas permis de caractériser les espèces entre elles, les paramètres mesurés en cytométrie de flux étant particulièrement sensibles à l'état physiologique des microalgues, très variable d'un échantillon à un autre. Nous disposons dorénavant d'une méthode d'identification qu'il serait souhaitable de transférer, au niveau national voire international, auprès des organismes en charge des collections. De plus, nous disposons dorénavant de données pertinentes pour établir pour chacune des microalgues d'intérêt aquacole une véritable carte d'identité.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2004/rapport-1546.pdf
http://archimer.ifremer.fr/doc/00000/1546/

Éditeur(s) : HAL CCSD
Résumé : International audience
Un inventaire des longueurs maximales atteintes de 42 espèces occupant la lagune de la Manche-à-Eau, Guadeloupe (Antilles françaises), a été effectué dans le but d'évaluer la relation existant entre cet écosystème et la taille des individus qu'il accueille. Leurs longueurs maximales observées LMO dans la région ont été comparées à celles disponibles LMD dans la littérature. La majorité des populations présente des individus dont la longueur atteint au moins 40% de la longueur maximale connue pour l'espèce, bien que seulement 38,1% possèdent des individus plus grands que 300mm en valeur absolue. Les populations des autres espèces n'y sont représentées que par des individus soit dans leur phase initiale de développement, soit de longueur réduite par rapport à la longueur maximale connue ailleurs pour la même espèce. Dans cette mangrove, les espèces de plus grande taille relative sont en général celles qui ont la plus faible longueur absolue. L'utilisation de l'indice RL (=LMO/LMD) comme outil descriptif et de comparaison des assemblages ichtyiques dans un écosystème et indicateur de sa qualité a rendu possible la pré-sélection de 12 espèces pour des essais d'élevage. En combinant les paramètres de nature biologique, technique et commerciale, la pré-sélection retient comme prioritaires les espèces suivantes: Archosargus rhomboidalis, Haemulon bonariense, Lutjanus griseus et Centropomus undecimalis.
Proceedings of the 61st Gulf and Caribbean Fisheries Institute
Gosier, Guadeloupe

hal-00755763
https://hal.univ-antilles.fr/hal-00755763
https://hal.univ-antilles.fr/hal-00755763/document
https://hal.univ-antilles.fr/hal-00755763/file/GCFI_61_2009_177-183.pdf

Éditeur(s) : HAL CCSD Geological Society
Résumé : International audience
Deformation mechanisms, long-term kinematics and evolution of fold and thrust belts subjected to erosion are studied through 2D analogue experiments involving large convergence. First-order parameters tested include (1) décollements and/or plastic layers interbedded at different locations within analogue materials and (2) synconvergence surface erosion. Weak layers, depending on their location in the model, favour deformation partitioning characterized by the simultaneous development of underplating domains in the inner part of the wedge (basal accretion) and frontal accretion where the wedge grows forward. Interaction between tectonics and surface processes influences this behaviour. Development of antiformal thrust stacks controlled by underplating shows small- and large-scale cyclicity. Thin plastic layers induce folding processes, which are studied at wedge scale. Recumbent and overturned folds, with large inverted limbs, develop in a shear-induced asymmetric deformation regime via progressive unrolling of synclinal hinges. Surface erosion and underplating at depth induce further rotation (passive tilting) and horizontalization of fold limbs. Model results give insights to discuss the mechanisms responsible for the large-scale structures (i.e. antiformal nappe stacks, klippen and kilometre-scale recumbent fold-nappes) encountered in several mountain belts such as the Montagne Noire (French Massif Central), the Galicia Variscan belt (Spain) and the northern Apennines (Italy).
ISSN: 0016-7649

hal-00937644
https://hal.archives-ouvertes.fr/hal-00937644
DOI : 10.1144/jgs2013-012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we propose a theoretical approach to test the validity of the isomechanical analogues for post-perovskite structures. Intrinsic plastic properties are evaluated for three materials exhibiting a post-perovskite phase: MgSiO3, MgGeO3 and CaIrO3. Dislocation properties of each structure are determined using the Peierls-Nabarro model based on first-principles calculations of generalised stacking fault and the plastic properties are extended to crystal-preferred orientations using a visco-plastic self-consistent method. This study provides intrinsic parameters of plastic deformation such as dislocation structures and Peierls stresses that can be directly compared between the three materials. It appears that it is very difficult to draw any simple conclusions on polycrystalline deformation simply by comparing single crystal properties. In particular, contrasting single crystal properties of MgSiO3 and CaIrO3 lead to similar crystal-preferred orientation of the polycrystal aggregates.
ISSN: 0031-9201

hal-00420104
https://hal.archives-ouvertes.fr/hal-00420104
DOI : 10.1016/j.pepi.2008.04.003

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The upward oil migration in a transparent and rough fracture containing a liquid of higher density is studied experimentally using a light transmission technique. The aperture heterogeneity is also measured by light transmission. The injection of oil in a fracture containing a heavier fluid produces a gravitational fingering instability. Depending on the injection velocity (capillary number, Ca) and the density difference between the two fluids (Bond number, Bo), different patterns are observed during the oil displacements. The width of the finger and its velocity are measured as a function of Bo and Ca. A stability analysis of the interface, based on a generalised Darcy equation in a two-dimensional fracture, allows an accurate description of the experimental results. The order of magnitude of the finger width and its velocity are in good agreement with the calculations, with small disparities due to various unknown fluid flow parameters: capillary pressure, finger thickness in the gap of the fracture, finger tortuosity and oil velocity field into the finger. The theoretical approach allows constructing a (Ca, Bo) phase diagram of stability of the interface.
ISSN: 0169-3913

hal-00429329
https://hal.archives-ouvertes.fr/hal-00429329
DOI : 10.1007/s11242-009-9340-2

Éditeur(s) : HAL CCSD
Résumé : This study is designed to improve the understanding of structural, mechanical and petrophysical characteristics of deformation bands in porous sandstone such as their potential influence on fluid storage or migration in reservoir setting. Structural and petrophysical analysis of band networks from Provence show that permeability of band is mainly controlled by the degree of cataclasis and diagenetic processes at depth. Map-scale analysis of band networks underlines the major influence of tectonic regime on band distribution, organization and permeability. Band associated to normal-fault regime (cataclasis and low-permeability) are located around map-sclae-fault whereas band associated to thurst-fault regime (moderate cataclasis and permeability) are pervasively distributed in all the area. Reverse-sense band are cataclastic and low-permeabiilty around the Roquemaure thrust, which show the potential role of large-scale fault on structural and petrophysical characteristics of bands. This analysis also shows the influence of fault propagation on formation of low permeability catacastic bands. This analysis suggests also granulometry as factor controlling organization of band networks.A mechanical analysis of deformation bands is realized based on results from Provence. Yield envelopes of these materials are calculated from analytical solution. Triaxial tests done on sandstone (L'Etang quarry, Orange) confirm the shape of yield envelope theoretically calculated. Triaxial tests done on the poorly-lithified sands (Boncavaï quarry, Uchaux) show grain size, sorting and packing influencing yield envelope and cataclastic band localization at shallow burial depth. Stress paths are calculated for burial and tectonic event (extension and contraction) using the relationship between main stress and secondary stresses (K0) calibrated from well data. These different results are integrated into a model which allows to estimate type and structural characteristics of bands susceptible to form for a known geological setting.A structural, mechanical and petrophysical model is established form these results. This model is calibrated by permeability data from deformation bands of Provence and results from the mechanical model of strain localization. This model is also confronted to a synthesis of permeability data from literature, which confirms the influence of the different controlling parameters integrated to the model. This model is applied for two sites of uranium exploration/exploitation in porous sandstone reservoirs and validated by field observations.
Cette étude est destinée à améliorer la compréhension des caractéristiques structurales, pétrophysiques et mécaniques des bandes de déformation dans les grès poreux ainsi que de leur rôle potentiel sur la migration ou le piégeage des fluides en milieu réservoir. L'analyse structurale et pétrophysique des réseaux de bandes de Provence montre que leur perméabilité découle principalement de l'intensité de la cataclase dans leur microstructure et des processus diagénétiques qui peuvent s'y localiser avec la profondeur. L'analyse régionale de ces réseaux de bandes souligne l'influence majeure du régime tectonique sur leur distribution, leur organisation et leur perméabilité. Les bandes associées au régime normal (cataclactiques et peu perméables) sont localisées autour des failles cartographiques, tandis que les bandes associées au régime inverse (modérement cataclastiques et perméables) sont distribuées dans toute la région. Les bandes inverses sont fortement cataclastiques et imperméables uniquement autour du chevauchement de Roquemaure ce qui montre le rôle potentiel de la présence de grande faille sur les caractéristiques structurales et pétrophysiques de ces bandes. D'autre part, cette analyse suggère que la granulométrie de l'encaissant peut influencer l'initiation et l'organisation des réseaux. L'analyse mécanique des bandes de déformation a ensuite été réalisée à partir des résultats obtenus en Provence. L'enveloppe de plasticité de ces matériaux est calculée à l'aide d'une solution analytique. Les essais triaxiaux menés sur le grès de la carrière de l'Etang (orange) confirment la forme de ces enveloppes estimées théoriquement. Les essais réalisés sur les sables de Boncavaï (Uchaux) montrent que la taille des grains, le tri et de la compaction dans ces matériaux peu lithifiés influent sur leurs enveloppes de plasticité et la localisation des bandes cataclastiques à faibles profondeurs. Les trajets de contraintes sont estimés pour les phases d'enfouissement et de chargement tectonique (extension et compression) à partir de la relation entre contrainte principale et contraintes secondaires (K0), calibrée à partir de données de forage. Ces résultats sont intégrés à un modèle permettant d'estimer la nature et les caractéristiques structurales des bandes susceptibles de se former dans un contexte géologique donné. Un modèle structural, mécanique et pétrophysique a été établir à partir de ces différents résultats. Ce modèle est calibré à partir des données de perméabilité mesurées sur les bandes de Provence et des résultats du modèle mécanique de localisation cité précédemment. Ce modèle a ensuite été confronté à une synthèse des données de perméabilité disponibles dans la littérature et confirme l'influence des différents paramètres de contrôle pris en compte dans le modèle. Ce modèle a enfin pu être appliqué sur deux sites d'explorations/exploitations d'uranium en réservoir gréseux poreux et validé par les résultats obtenus, en concordance avec les observations de terrain.
https://tel.archives-ouvertes.fr/tel-01001389

NNT : 2013MON20067
tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389/document
https://tel.archives-ouvertes.fr/tel-01001389/file/36072_BALLAS_2013_archivage-1_cor.pdf

Éditeur(s) : Academic Press Ltd- Elsevier Science Ltd
Résumé : Antioxidant defences and induced oxidative stress tissue damage of the blue shrimp Litopenaeus stylirostris, under challenge with Vibrio nigriputchritudo, were investigated for a 72-h period. For this purpose, L stylirostris were first infected by immersion with pathogenic V. nigripulchritudo strain SFn1 and then antioxidant defences: superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (Gpx), Total antioxidant status (TAS), glutathiones and induced tissue damage (MDA and carbonyl proteins) were determined in the digestive gland at 0, 12, 24, 48 and 72 h post-infection (h.p.i.). In the meantime, TAS was also measured in the blood. Infection level of the shrimps during the challenge was followed by determining V. nigripulchritudo prevalence and load in the haemolymph of the shrimps. Changes in all these parameters during the 72-h.p.i. period were recorded for control shrimps and shrimps previously fed for one month with probiotic Pediococcus aciditactici MA18/5M at 10(7) CFU g(-1) of feed. Our results showed that immersion with V nigripulchritudo led to maximal infection level in the haemolymph at 24 h.p.i. preceding the mortality peak recorded at 48 h.p.i. Significant decreases in the antioxidant defences were detected from 24 h.p.i. and beyond that time infection leaded to increases in oxidative stress level and tissue damage.. Compared to control group, shrimps fed the probiotic diet showed lower infection (20% instead of 45% at 24 h.p.i. in the control group) and mortality (25% instead of 41.7% in the control group) levels. Moreover, infected shrimp fed the probiotic compared to uninfected control shrimps exhibited very similar antioxidant status and oxidative stress level. Compared to the infected control group, shrimps fed the probiotic sustained higher antioxidant defences and lower oxidative stress level. This study shows that bacterial infection leads to oxidative stress in L. stylirostris and highlighted a beneficial effect of P. acidilactici, suggesting both a competitive exclusion effect leading to a reduction of the infection level and/or an enhancement of the antioxidant status of the shrimps. (C) 2010 Elsevier Ltd. All rights reserved.
Fish & Shellfish Immunology (1050-4648) (Academic Press Ltd- Elsevier Science Ltd), 2010-04 , Vol. 28 , N. 4 , P. 622-631

Droits : 2010 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/00003/11419/7984.pdf
DOI:10.1016/j.fsi.2009.12.024
http://archimer.ifremer.fr/doc/00003/11419/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Multiple chemicals are emitted in residential accommodation. Aggregate Daily Doses (ADD) (ng/kg-bw/d) were estimated for 32 semivolatile organic compounds (SVOCs) of different chemical families that are frequently detected in French dwellings in both air and settled dust. Daily doses were determined using steady-state models for the population, categorized into 11 age groups covering birth to age 30. Three routes of exposure were taken into account: dust ingestion, inhalation (gaseous and particulate phases) and dermal contact with the gaseous phase of air. Contamination levels were preferentially retrieved from large, nationwide representative datasets. A two-dimensional probabilistic approach was used to assess parametric uncertainty and identify the most influential factors. For children aged 2 to 3 years, ADD estimates spanned orders of magnitude, with median values ranging from 8.7 pg/kg-bw/d for 2,2′,3,4,4′-pentabromodiphenylether (BDE 85) to 1.3 μg/kg-bw/d for di-isobutyl phthalate (DiBP). Inhalation, ingestion and dermal pathway contributed at varying levels, and depending on compound, air was the dominant medium for 28 of the 32 compounds (either by inhalation or dermal contact). Indoor exposure estimate variance was mainly driven by indoor contamination variability, and secondarily by uncertainty in physical and chemical parameters. These findings lend support to the call for cumulative risk assessment of indoor SVOCs.
ISSN: 0160-4120

hal-01635777
https://hal.archives-ouvertes.fr/hal-01635777
https://hal.archives-ouvertes.fr/hal-01635777/document
https://hal.archives-ouvertes.fr/hal-01635777/file/Article_Expo_Pelletier_Manuscript%20Env%20Int%20rev2.pdf
DOI : 10.1016/j.envint.2017.08.024

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf