Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The brittle structures of a Hercynian granite (La Borne, French Massif Central) observed at several scales, from regional to microscopic, are presented and interpreted on mechanical terms. Emphasis is placed on strike slip faults, joints, and cracks related to incipient shear fracturing during horizontal compression. Three compressive tectonic phases have been identified according to their brittle structures and characterised by the burial depth at the time of their generation.The two first phases (H1, H2) are Hercynian and occurred while the granite was deeply buried (∼5 to 3 km depth) whereas the last phase (P) is Pyrenean and occurred at very low depth. The geometric organizations of cracks, joints and faults are clearly similar at various scales from about 10 μm to several m.These field observations are strong arguments for the occurrence of shear structures at microscopic to macroscopic scales during tectonic events. Following this inference, it is proposed that, at least in the case of Hercynian phases, cracks, joints and macroscopic strike slip faults have been generated by the same mechanical process under high overburden weight. Therefore, incipient fractures seem to be generated as shearing structures and to evolve by coalescence with neighbouring ones with the same direction.
ISSN: 0191-8141

hal-01115718
https://hal.archives-ouvertes.fr/hal-01115718
DOI : 10.1016/j.jsg.2014.05.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Based on global earthquake catalogs, the hypocenters, nodal planes, and seismic moments of worldwide subduction plate interface earthquakes were extracted for the period between 1900 and 2007. Assuming that the seismogenic zone coincides with the distribution of 5.5 <= M < 7 earthquakes, the subduction interface seismogenic zones were mapped for 80% of the trench systems and characterized with geometrical and mechanical parameters. Using this database, correlations were isolated between significant parameters to identify cause-effect relationships. Empirical laws obtained in previous studies were revisited in light of this more complete, accurate, and uniform description of the subduction interface seismogenic zone. The seismogenic zone was usually found to end in a fore-arc mantle, rather than at a Moho depth. The subduction velocity was the first-order controlling parameter for variations in the physical characteristics of plate interfaces, determining both the geometry and mechanical behavior. As such, the fast subduction zones and cold slabs were associated with large and steep plate interfaces, which, in turn, had large seismic rates. The subduction velocity could not account for the potential earthquake magnitude diversity that was observed along the trenches. Events with M-w >= 8.5 preferentially occurred in the vicinity of slab edges, where the upper plate was continental and the back-arc strain was neutral. This observation was interpreted in terms of compressive normal stresses along the plate interface. Large lateral ruptures should be promoted in neutral subduction zones due to moderate compressive stresses along the plate interface that allow the rupture to propagate laterally.
ISSN: 1525-2027

hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681/document
https://hal.archives-ouvertes.fr/hal-00617681/file/heuretG32011.pdf
DOI : 10.1029/2010GC003230

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Our knowledge and understanding of the 3-D lithospheric structure of the Himalayas and the Tibetan Plateau is still challenging although numerous geophysical studies have been performed in the region. The GOCE satellite mission has the ambitious goal of mapping Earth's gravity field with unprecedented precision (i.e. an accuracy of 1-2 mGal for a spatial resolution of 100 km) to observe the lithosphere and upper-mantle structure. Consequently, it gives new insights in the lithospheric structure beneath the Himalayas and the Tibetan Plateau. Indeed, the GOCE gravity data now allow us to develop a new strategy for joint gravimetry-seismology inversion. Combined with teleseismic data over a large region in a joint inversion scheme, they will lead to lithospheric velocity-density models constrained in two complementary ways. We apply this joint inversion scheme to the Hi-CLIMB (Himalayan-Tibetan Continental Lithosphere during Mountain Building) seismological network which was deployed in South Tibet and the Himalayas for a 3-yr period. The large size of the network, the high quality of the seismological data and the new GOCE gravity data set allow us to image the entire lithosphere of this active area in an innovative way. We image 3-D low velocity and density structures in the middle crust that fit the location of discontinuous low S-velocity zones revealed by receiver functions in previous geophysical studies. In the deeper parts of our velocity model we image a positive anomaly interpreted to be the heterogenous Indian lithosphere vertically descending beneath the centre of the Tibetan Plateau.
ISSN: 0956-540X

hal-00858024
https://hal.archives-ouvertes.fr/hal-00858024
DOI : 10.1093/gji/ggs110

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A San Carlos olivine polycrystal has been deformed under uppermost mantle conditions, by compression at 900 °C, at a strain rate of 1.1 × 10−5 s−1, under a confining pressure of 300 MPa, using the Paterson press. Transmission electron tomography of dislocations has been performed by scanning transmission electron microscopy, by conventional transmission electron microscopy using the weak-beam dark-field technique, associated with precession or not, in order to determine the glide planes of [001] screw dislocations. This recent technique is the most suitable one since most [001] dislocations exhibit straight screw segments due to the high lattice friction on this character at low temperature. We find that [001] dislocations glide in (100), (010) and {110} as already reported, but also more unexpectedly in {120} and {130}. We show that at 900 °C, [001] {110} glide is dominant in polycrystals. We have, however, noted and characterized numerous cross-slip events in the specimen.
ISSN: 0342-1791

hal-01054330
https://hal.archives-ouvertes.fr/hal-01054330
DOI : 10.1007/s00269-014-0665-1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have investigated the seismic anisotropy from SKS and SKKS wave splitting along a N-S profile perpendicular to the Pyrenean mountain belt. The line crossed the North Pyrenean Fault (NPF), which probably represents the plate boundary between the European and the Iberian plates. We observed large delay times δt (1.3 to 1.5 s) and uniform fast polarization directions ϕ (N100E) at three stations located on the Iberian plate. On the other hand, δt are smaller (0.5–1.0 s) and the ϕ scattered at stations located north of the NPF. The small scale variability, the relation with surface geology and the correlation of the δt with lithospheric thickness suggest that the anisotropy could be predominantly of lithospheric origin. However, an asthenospheric contribution cannot be ruled out. In the North Pyrenean Zone, an important thermal event before the Pyrenean compression has likely erased the former mantle fabric. The observed anisotropy is then likely related to the Pyrenean orogeny. On the Iberian plate, our splitting parameters are similar to those obtained at two stations located on Hercynian structures in Central Spain. This suggests that two contributions are likely superposed to that of the Pyrenean built up: one related to the Hercynian orogeny and the other one related to the rotation of the Iberian plate.
ISSN: 0094-8276

hal-01389118
http://hal.univ-reunion.fr/hal-01389118
http://hal.univ-reunion.fr/hal-01389118/document
http://hal.univ-reunion.fr/hal-01389118/file/barruol_pyr_GRL1995.pdf
DOI : 10.1029/94GL03225

Éditeur(s) : HAL CCSD Royal Society
Résumé : International audience
Trees control their posture by generating asymmetric mechanical stress around the periphery of the trunk or branches. This stress is produced in wood during the maturation of the cell wall. When the need for reaction is high, it is accompanied by strong changes in cell organization and composition called reaction wood, namely compression wood in gymnosperms and tension wood in angiosperms. The process by which stress is generated in the cell wall during its formation is not yet known, and various hypothetical mechanisms have been proposed in the literature. Here we aim at discriminating between these models. First, we summarize current knowledge about reaction wood structure, state and behaviour relevant to the understanding of maturation stress generation. Then, the mechanisms proposed in the literature are listed and discussed in order to identify which can be rejected based on their inconsistency with current knowledge at the frontier between plant science and mechanical engineering.
Journal of the Royal Society Interface

hal-01392832
https://hal.archives-ouvertes.fr/hal-01392832
https://hal.archives-ouvertes.fr/hal-01392832/document
https://hal.archives-ouvertes.fr/hal-01392832/file/AlmerasClair2016_JRSInterface_Critical%20review%20on%20the%20mechanisms%20of%20maturation%20stress%20generation%20in%20trees_HAL.pdf
DOI : 10.1098/rsif.2016.0550

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To estimate the seismic hazard, the geometry (dip, length and orientation) and the dynamics (type of displacements and amplitude) of the faults in the area of interest need to be understood. In this paper, in addition to geomorphologic observations, we present the results of two ground penetrating radar (GPR) campaigns conducted in 2010 and 2011 along the Emeelt fault in the vicinity of Ulaanbaatar, capital of Mongolia, located in an intracontinental region with low deformation rate that induces long recurrence time between large earthquakes. As the geomorphology induced by the fault activity has been highly smoothed by erosion processes since the last event, the fault location and geometry is difficult to determine precisely. However, by using GPR first, a non-destructive and fast investigation, the fault and the sedimentary deposits near the surface can be characterized and the results can be used for the choice of trench location. GPR was performed with a 50 MHz antenna over 2-D lines and with a 500 MHz antenna for pseudo-3-D surveys. The 500 MHz GPR profiles show a good consistency with the trench observations, dug next to the pseudo-3-D surveys. The 3-D 500 MHz GPR imaging of a palaeochannel crossed by the fault allowed us to estimate its lateral displacement to be about 2 m. This is consistent with a right lateral strike-slip displacement induced by an earthquake around magnitude 7 or several around magnitude 6. The 2-D 50 MHz profiles, recorded perpendicular to the fault, show a strong reflection dipping to the NE, which corresponds to the fault plane. Those profiles provided complementary information on the fault such as its location at shallow depth, its dip angle (from 23 • to 35 •) and define its lateral extension. Central Asia is known for its high level of seismic hazards, especially Mongolia, which has been one of the most seismically active intracontinental regions in the world with four large earthquakes (magnitude around 8) along its active faults in the western part of the country during the last century (Khilko et al. 1985). The deformation in Mongolia is located between compressive structures related to the collision and penetration of the Indian plate into the Eurasian plate and extensive structures in the north of the country related with the Baykal rift (Tapponnier & Molnar 1979; Baljinnyam et al. 1993; Schlupp 1996; Bayasgalan & Jackson 1999). The seismic activity observed in the vicinity of Ulaanbaatar (UB), capital of Mongolia, is relatively low compared to the activity observed in western Mongolia. Nevertheless, since 2005, the seismic activity around UB not only has increased, but is also organized (see Fig. 1) at the west of UB along two perpendicular directions, which determine two active faults: Emeelt fault, discovered in 2008 (NNW-SSE direction, 25-km-long minimum and situated about 10 km W of UB) and Hustai fault (WSW–ENE direction, 80 km long, with its NE tip at less than 20 km west of UB); their length and morphology indicate that they can produce earthquakes of magnitude 6.5–7.5 (Schlupp et al. 2012). Most of the Mongolian population (1.2 million over 3 million) is concentrated at UB, which is the main political and economical centre of the country. Hence, the study of seismic hazard and the estimation of the probability of future destructive earthquakes are of primary importance for the country (Dugarmaa et al. 2006). Since the last large earthquake, the faults geomorphology has been highly smoothed by erosional processes and the exact location of the fault plane surface rupture is thus hidden within a several metre wide strip. The GPR method has been proven to give good and useful results to characterize faults by identifying offsets of radar reflections (Malik et al. 2007; Christie et al. 2009; Yalçiner et al. 2013) and
ISSN: 0956-540X

hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629/document
https://hal.archives-ouvertes.fr/hal-01342629/file/Dujardin_Bano_etal_Geoph.%20J.%20Int._2014_final.pdf
DOI : 10.1093/gji/ggu130

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we present the first estimate of the Holocene deformation along the southern front of Gibraltar arc (Morocco) and the first field constraints on the local 1755 CE Fes-Meknes surface rupturing earthquake which could be associated to the “Great Lisbon Earthquake” (M > 8.5) in November 1st, 1755. Using satellite imagery, aerial photographs and field investigations, we carried out a morphotectonic study along the ~ 150 km-long Southern Rif Front (SRF) to identify the most recent evidences of tectonic activity. Analyzed offset alluvial deposits confirm that (i) the last ~ 5 ka cumulative deformation leading to a slip rate of ~ 3.5 ± 1 mm/yr for this segment of the SRF is consistent with the GPS derived horizontal shortening rate of 2–4 mm/yr and (ii) a recent major earthquake ruptured a ~ 30 km-long segment along the SRF. Based on deposits dating and historical seismicity we propose that this seismic event occurred in 1755 as a local earthquake. Even though this 1755 local event cannot be considered as a strong aftershock of the main Lisbon seismic event (M > 8.5), their temporal closeness, their occurrence under the same convergent stress regime (~ NNW-SSE-oriented compression) and the fact that Fes-Meknes area was strongly shaken during the Lisbon earthquake, raises the question of the possible triggering of the Fes earthquake. Anyway, our new results suggest that most of the Nubia-Rif belt convergence is accommodated by the SRF, making it potentially the most destructive structure of the Rif.
ISSN: 0040-1951

hal-01622048
https://hal.archives-ouvertes.fr/hal-01622048
DOI : 10.1016/j.tecto.2017.05.036

Éditeur(s) : Gauthier-Villars
Résumé : In the sedimentary areas surrounding the Florida Keys, Soritidae and Peneroplidae are very well represented. These benthic foraminifera are generally attached to seagrasses or algae and more rarely to carbonate deposits. The colouring of their protoplasm results from the nature of endosymbiotic algae. The principal species represented are: Androsina lucasi (never recorded before in Florida) which lives only in the margino-littoral biotopes where the salinity is highly variable; Archaias angulatus and Amphisorus hemprichii which live in the biotopes of the littoral platform but also in those of the interior margin of the bay where the variations of salinity are weak; Cyclorbiculina compressa and Peneroplis proteus which live for the main part in the littoral biotopes of the oceanic platform where the salinity is normal and quite constant; five other species of secondary importance take the number of taxa observed alive in the Keys area up to ten. Moreover, if the comparison of the biocenoses and thanatocenoses emphasizes their comparative similitude, knowledge of the biocenoses permits a better understanding of their adaptation to present-day environments.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 5 , P. 515-524

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00103/21379/18979.pdf
http://archimer.ifremer.fr/doc/00103/21379/

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Recent field work and review of radiometric data obtained from Neogene lavas and plutonic rocks exposed in the Eastern Central Patagonian Cordillera (46–48ºS), which overlie subducted segments of the South Chile Ridge, suggest important Late Miocene to Pleistocene morphological changes in relation to base level variations and/or tectonic events. We present new field observations from a region south of Lago General Carrera-Buenos Aires, between the main Cordillera and the Meseta del Lago Buenos Aires, demonstrating that normal faulting controlled valley incisions and occurred during lava emplacement at 5–4 Ma and after 3 Ma. We also show that the 12 Ma basaltic flows of the Meseta del Lago Buenos Aires (~2000 m a.s.l.) have been subjected to deep incision, with younger lavas dated at 1.2 Ma partially filling the valleys. These incisions are thought to reflect progressive eastward tilting of the entire meseta. Our new observations, together with additional features from Central Patagonia, strongly suggest that tectonic events led to a regional widespread morphological change after 5 Ma. The coincidence in time and space between the subduction of segments of the South Chile Ridge at 6 and 3 Ma causing opening of a slab window, and strong base level variations in the studied area, suggests a cause-and-effect relationship. In Central Patagonia, compressional tectonics ended well before extensional events reported here. Causes of uplift and further extension are probably completely disconnected. The uplift is purely tectonic in origin and occurred prior to the subduction of the South Chile Ridge. Extension should be a consequence of this subduction.
ISSN: 0954-4879

insu-00272075
https://hal-insu.archives-ouvertes.fr/insu-00272075
DOI : 10.1111/j.1365-3121.2007.00766.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This paper investigates the orientation and sources of stress in the forearc of the Cascadia subduction zone in southwest British Columbia, using Bayesian inversion results from focal mechanism data and comparing results with GPS derived short-term strain rates. The subduction margin in this region includes a change in orientation from N-S in Washington State to NW-SE in British Columbia. Over 1000 focal mechanisms from North American crustal earthquakes have been calculated to identify the dominant style of faulting, and ∼600 were inverted to estimate the principal stress orientations and the stress ratio. Our results indicate the maximum horizontal compressive stress orientation changes with distance to the trench, from approximately margin-normal along the coast to approximately margin-parallel 100-150 km inland from the coast. Comparing stress orientations with GPS data, we relate the margin-normal stress direction to subduction-related strain rates due to the locked interface between the North American and Juan de Fuca plates just west of Vancouver Island. Further from the margin the plates are coupled less strongly, and the margin-parallel maximum horizontal compressive stress in the North American Plate relates to the northward push of the Oregon Block, which is also observed in the horizontal shortening direction of the residual strain rates, after the subduction component is removed.
ISSN: 0148-0227

hal-00853734
https://hal.archives-ouvertes.fr/hal-00853734
DOI : 10.1029/2010JB008003

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Located east of Guadeloupe, the island of La Désirade exhibits the oldest rocks of the Lesser Antilles arc and the eastern Caribbean plate. An old magmatic basement is composed of (1) late Jurassic ophiolitic complex with meta-basaltic pillow lavas and interbedded radiolarites, (2) acid igneous complex comprising meta-quartz-diorite and meta-rhyolitic lavas flows, and (3) meta-diabasic/microdioritic dyke swarm complex. We present and discuss the discovery of synmetamorphic thrust tectonics in this island. Based on detailed structural analysis we evidenced two main compressive events. The first event (D1) is characterized by pervasive folding associated with thrust development. In the northeastern part of the island, a major thrust fault, the Grand Abaque Thrust, has been discovered which displaces for several kilometers the acid igneous complex onto the ophiolitic unit. The second deformation event (D2) is featured by a main pervasive cleavage S2 observed at the regional scale associated with upright folding (F2) and by the development of two sets of conjugated steeply dipping strike-slip shear zones, dextral 130°N and sinistral 20°N striking, respectively. Microstructural observations indicate that Greenschist facies metamorphism is clearly contemporaneous with the development of D1 and D2 superimposed tectonic structures. Ar/Ar geochronology was performed on two bulk of adularia minerals sampled in the northeast volcanic complex within a deformed zone related to a D2 event. These analyses yield well-defined and concordant plateau ages at 106.2 ± 1.7 Ma and 107.2 ± 1.8 Ma. Thus, shortening and thickening tectonics occurred during Lower Cretaceous (Albian). In the available framework of Caribbean geodynamics, the synmetamorphic thrust tectonics we discovered in the French Lesser Antilles is related to the collision between an Aptian-Albian oceanic plateau and the Andean-Cordilleran east-dipping subduction zone. Our results support subduction polarity reversal during Lower Cretaceous.
ISSN: 0278-7407

hal-00620555
https://hal.archives-ouvertes.fr/hal-00620555
DOI : 10.1029/2011TC002875

Résumé : Herbácea erecta perenne, glabra, comúnmente muy ramificada. Hojas alternas, ovadas a deltoideas, de hasta 30 cm, pinnati-compuestas, con divisiones filiformes; vainas peciolares de 3-10 cm de longitud. Inflorescencia en umbelas con muchas flores, de hasta 12 cm de diámetro; pétalos amarillos. Fruto oblongo, glabro, ligeramente compreso, con costillas agudas e iguales. Con frecuencia esta especie es confundida con Anethum graveolens, la cual tiene una vaina peciolar más corta y las costillas del fruto estrechamente aladas, las 2 laterales más amplias.
Herbacée dressée pérenne, glabre, habituellement très ramifiée. Feuilles alternes, ovées à triangulaires, pouvant atteindre 30 cm, pennati-composées, avec divisions filiformes. Inflorescence en ombelles avec de nombreuses fleurs, pouvant atteindre 12 cm de diamètre; pétales jaunes. Fruit oblong, glabre, légèrement comprimé, avec côtes aiguës. Cette espèce est fréquemment confondue avec Anethum graveolens, laquelle a une gousse pétiolaire plus courte et les 2 côtes latérales du fruit plus amples.
Erect perennial, glabrous branched herb up to 2 m tall. Leaves alternate with swollen sheaths 3-10 cm long, pale-edged and three or four times pinnatisect, forming fine thread-like segments; inflorescence in terminal umbels 12 cm diameter, flowers yellow 1-2 mm in diameter; fruit ovoid 5-6 mm long, greenish-brown with prominent ridges. This species is frequently confused with Anethum graveolens, in spite of the fact that the latter has a shorter petiolar sheath and its fruit features tightly winged ribs, the two side ribs being broader.
Nativa de la región mediterránea, cultivada y con frecuencia naturalizada en las regiones templadas y subtropicales del mundo.
Originaire de la région méditerranéenne, cultivée et fréquemment naturalisée dans les régions tempérées et subtropicales

http://www.tramil.net/fototeca/plant173