Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
Since the early descriptions published by Callaway in 1884, the gently dipping mylonites exposed along the Moine Thrust at the Stack of Glencoul have drawn generations of geologists to the northern part of the Assynt district. These mylonites, derived from Cambrian quartzites (footwall) and Moine pelites and psammites (hanging wall), have figured prominently in: a) early research into the influence of crystal plastic deformation and recrystallization on microstructural and crystal fabric evolution; b) debates on the kinematic interpretation of macro- and micro-structures and crystal fabrics; and c) debates on the tectonic significance of such kinematic data. In this paper first we briefly review the historical aspects of this research and then, using both previously published and unpublished data, document the finite strain and quartz fabric development at this classic mylonite locality. A tectonic interpretation of these data, together with quantitative estimates of flow vorticities associated with mylonite formation at the Stack of Glencoul, are presented in a companion paper by Law (2010).
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne, Geological Society Speci

hal-00564962
https://hal.archives-ouvertes.fr/hal-00564962

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The New Caledonia ophiolite (Peridotite Nappe) is dominated by mantle lithologies, composed of forearc-related refractory harzburgites and minor lherzolites in both the spinel and plagioclase facies.In this study, a comprehensive geochemical data set (major, trace elements and Sr–Nd isotopes) is used to constrain the mantle evolution of the lherzolites and their relationships with the basalts from the Poya Terrane, which tectonically underlies the mantle rocks. The majority of the lherzolites are low-strain porphyroclastic tectonites. They likely record an asthenospheric origin followed by re-equilibration at lithospheric conditions, as supported by geothermometric estimates (T = 1100–940 °C and 920–890 °C for porphyroclastic and neoblastic spinel-facies assemblages, respectively). Olivine composition (Fo = 88.5–90.0 mol%), spinel Cr# ([molar 100 • Cr/(Cr + Al)] = 13–17) and relatively high amounts (7–8 vol%) of Al2O3- and Na2O-rich clinopyroxene (up to 0.5 and 6.5 wt.%, respectively) indicate a moderately depleted geochemical signature for the spinel lherzolites. Bulk rock and clinopyroxene rare earth elements (REE) patterns display a typical abyssal-type signature, i.e. steeply plunging LREE accompanied by nearly flat HREE to MREE. Clinopyroxene REE compositions of the spinel lherzolites may be reproduced by small amounts of fractional melting of a garnet lherzolite precursor (~ 4%), followed by 4%–5% melting in the spinel peridotite field. The plagioclase lherzolites show melt impregnation microstructures, Cr- and Ti-rich spinels and incompatible trace element enrichments (REE, Ti, Y, and Zr) in bulk rocks and clinopyroxenes. Impregnation modelling for these elements suggests that the plagioclase lherzolites originated from residual spinel lherzolites by entrapment of highly depleted (non-aggregated) MORB melt fractions in the shallow oceanic lithosphere. Nd isotope compositions of the investigated peridotites are consistent with derivation from an asthenospheric mantle source that experienced a recent MORB-producing depletion event. This evolution was most likely accomplished in a spreading ridge. However, geochemical trace element modelling and Nd isotopes do not support a genetic mantle–crust link between the lherzolites and enriched-MOR-type basalts from the Poya Terrane.
ISSN: 0024-4937

hal-01412440
https://hal.archives-ouvertes.fr/hal-01412440
DOI : 10.1016/j.lithos.2016.04.030

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Properties of composite materials depend on interatomic phenomena occurring between binder crystals. Experimental information of Atomic Force Microscopy (A.F.M.) is of prime importance; however understanding is helped by molecular modeling. As underlined in Section 1, the present study is able to simulate crystal interfaces in presence of a solution within apertures less than 1 Nanometer at a full atomic scale. Section 2 presents the case study of a gypsum solution between (120) gypsum faces, with related boundary conditions and atomic interactions. Section 3 deals with the mass equilibrium of the solution within interfaces <5 angstrom, using the original Semi Analytical Stochastic Perturbations (SASP) approach. This information becomes in Section 4 the key for explaining the peak of adhesion obtained in A.F.M. around an aperture of 3 A and gives enlightenments on gypsum cohesion. In conclusion, this illustration shows the potentialities of full atomic modeling which could not be attained by any numerical approach at a mesoscopic scale.
ISSN: 0008-8846

hal-00411868
https://hal.archives-ouvertes.fr/hal-00411868
DOI : 10.1016/j.cemconres.2007.09.022

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : New structural, microstructural, and 40Ar/39Ar data from the NW Massif Central (France) provide additional constraints on the timing and tectonic setting of late Variscan granite magmatism. Previous studies had emphasized the role of late orogenic extension in the emplacement of granite plutons in the Limousin region. In contrast, the new data set is consistent with syntectonic emplacement of magma in a dextral simple shear active from 350 to 300 Ma in a transpressional regime. As an alternative hypothesis to late orogenic extension, we propose that magmas migrated into tensional bridges between active P shears associated with a lithospheric shear zone comparable to a pop-up structure. The Galician region, in the western end of the Ibero-Armorican tectonic arc, exhibits major left-lateral ductile shear zones which can be interpreted as conjugate structures to the Limousin and Armorican shear zones. Citation: Ge´belin, A., M. Brunel, P. Monie´, M. Faure, and N. Arnaud (2007), Transpressional tectonics and Carboniferous magmatism in the Limousin, Massif Central, France: Structural and 40Ar/39Ar investigations
ISSN: 0278-7407

hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212/document
https://hal-insu.archives-ouvertes.fr/hal-00104212/file/2005TC001822.pdf
DOI : 10.1029/2005TC001822

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
Determination of the membrane seal capacity of deformation bands is critical for managing geologic reservoirs in porous sandstones. In this study, we have analyzed a cataclastic shear-band network developed in uncemented porous sandstone in Provence, France. Geometrical analyses of the bands show significant differences between three types of bands (single strand, multistrand, and band cluster), sorted by their number of strands, their amount of shear displacement, and their thicknesses. At the microscopic scale, the image-analysis porosities and the grain-size distributions allow definition of three different types of microstructural deformation: damage zone, protocataclastic, and cataclastic. Whereas damage zone and protocataclastic deformations are observed in each type of band, cataclastic strands are observed in clusters and, sometimes, in multistrands. Cataclastic strands are characterized by a porosity reduction of 10 to 25% and a permeability reduction of three to five orders of magnitude compared to the host rock. Field observations of iron hydroxide precipitations around the bands suggest that cataclastic strands were membrane seals to water flow under vadose condition. This study therefore highlights the importance of the degree of cataclasis in shear bands as membrane seals to subsurface fluid flows in sandstone reservoirs.
ISSN: 0149-1423

hal-00766557
https://hal.archives-ouvertes.fr/hal-00766557
DOI : 10.1306/04051211097

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geodetic data support a short-term continental deformation localized in faults bounding lithospheric blocks. Whether major "faults" observed at the surface affect the lithospheric mantle and, if so, how strain is distributed are major issues for understanding the mechanical behavior of lithospheric plates. A variety of evidence, from direct observations of deformed peridotites in orogenic massifs, ophiolites, and mantle xenoliths to seismic reflectors and seismic anisotropy beneath major fault zones, consistently supports prolongation of major faults into the lithospheric mantle. This review highlights that many aspects of the lithospheric mantle deformation remain however poorly understood. Coupling between deformation in frictional faults in the uppermost crust and localized shearing in the ductile crust and mantle is required to explain the post-seismic deformation, but mantle viscosities deduced from geodetic data and extrapolated from laboratory experiments are only reconciled if temperatures in the shallow lithospheric mantle are high (> 800 °C at the Moho). Seismic anisotropy, especially shear wave splitting, provides strong evidence for coherent deformation over domains several tens of km wide in the lithospheric mantle beneath major transcurrent faults. Yet it cannot detect narrow strain localization zones or shallowly dipping faults. Seismic profiling images shallow-dipping seismic reflectors in the lithospheric mantle interpreted as the continuation of normal or, less frequently, inverse faults in the mantle. However the nature of these reflectors is poorly understood. There is a large discrepancy between the scale at which deformation processes are studied (a few kilometers, at most, due to the limited size of continuous mantle exposures at the Earth's surface) and the scale inferred for strain localization in the mantle from geophysical observations (tens of kilometers). Combining data on deformation microstructures and crystal preferred orientations in naturally deformed peridotites and seismologic observations allows nevertheless discussing strain localization processes that may play a role on the development of mantle shear zones.
ISSN: 0040-1951

hal-00750314
https://hal.archives-ouvertes.fr/hal-00750314
DOI : 10.1016/j.tecto.2012.06.006

Éditeur(s) : HAL CCSD
Résumé : This study assesses the place of MSEs in Haiti and gives a brief description of the relevant economic, regulatory and technological instruments of economic development and environmental protection. The discussions suggest that the application of such instruments will encourage and improve economic development in Haiti. The infrastructure necessary for MSEs drives growth and offers added value to economic development in Haiti. With an overview of Haitian MSEs we have been able to identify and palliate insufficiencies in the legislative framework regulating the operation of MSEs, as well as, understand their involvement in economic growth. MSEs are a powerful tool to reduce poverty, facilitate economic development and reinforce policies supporting environmental protection.
Ce travail dresse un bilan sur la situation des TPE en Haïti et propose une analyse succincte de l’impact des instruments économiques, règlementaires et technologique au développement économique et à la protection de l’environnement. Les discussions menées ont permis de découvrir que l’application de ces instruments est une perspective d’amélioration du développement économique des TPE.La structuration des TPE reste la principale action stratégique de croissance et représente une grande valeur ajoutée pour le développement économique du pays. Le panorama des TPE haïtiennes nous a permis de compléter les insuffisances du cadre légal réglementant le fonctionnement des TPE et de comprendre leur participation à la croissance économique du pays. Ce sont des outils indispensables pour réduire la pauvreté, faciliter le développement économique et renforcer les politiques de protection de l’environnement à travers le pays.
https://hal.univ-antilles.fr/hal-01292918

hal-01292918
https://hal.univ-antilles.fr/hal-01292918
https://hal.univ-antilles.fr/hal-01292918/document
https://hal.univ-antilles.fr/hal-01292918/file/Final-IER_Article%20P.%20SIMON.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Tension wood of Laetia procera (Poepp.) Eichl. (Flacourtiaceae), a neo-tropical forest species, shows a peculiar secondary wall structure, with an alternance of thick and thin layers, while opposite wood of this species has a typical secondary wall structure (S1 + S2 + S3). Samples for the study of microstructural properties were collected upon the estimation of growth stresses in the living tree, in order to analyze the correlation of the former with the latter. Investigation using optical microscopy, scanning electron microscopy and UV microspectrophotometry allowed the description of the anatomy, ultra-structure and chemistry of this peculiar polylaminate secondary wall. In the thick layers, cellulose microfibril angle is very low (i.e., microfibril orientation is close to fibre axis) and cellulose microfibrils are well organized and parallel to each other. In the thin layers, microfibrils (only observable in the inner layer) are less organized and are oriented with a large angle relative to the axis of the cell. Thick layers are lightly lignified although thin layers show a higher content of lignin, close to that of opposite wood secondary wall. The more the wood was under tensile stress, the less the secondary wall was lignified, and lower the syringyl on guaiacyl lignin units' ratio was. The innermost layer of the secondary wall looks like a typical S3 layer with large microfibril angle and lignin occurrence. The interest of this kind of structure for the understanding of stress generation is discussed.
ISSN: 0931-1890

hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923/document
https://hal.archives-ouvertes.fr/hal-00194923/file/Trees_RuelleYoshidaClairThibaut_submitted2006.pdf
DOI : 10.1007/s00468-007-0128-0

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Phyllosilicate content and related permeability of fault zones form primary controls on hydraulic and mechanical behavior of the brittle crust. Hence, understanding and predicting the localization of these ubiquitous minerals is a major issue for fundamental and applied geosciences. We describe normal fault zones cutting a foreland arkosic turbiditic formation suffering high-T diagenesis and formed under conditions (~200°C) typical of deeply buried reservoirs and common within the seismogenic interval. Microstructural analyses show a large proportion of phyllosilicates (up to 34%) in the fault rock, derived from near-complete feldspar alteration and disaggregation during deformation. This study shows that even faults with offsets (~20 cm) much lower than bed thickness can have such large feldspar-to-phyllosilicate transformation ratios, implying that the origin of the phyllosilicates is purely transformation related. These results imply that the potential sealing capacity and strength of faults could be predicted from the host rock feldspar content. Where sealing capacity and fault strength can be related to phyllosilicate content, these properties can then also be inferred from the predicted phyllosilicate content: this opens up new horizons concerning the hydraulic and the mechanical behavior of the upper crust.
ISSN: 0094-8276

hal-00903574
https://hal.archives-ouvertes.fr/hal-00903574
DOI : 10.1002/grl.50829

Éditeur(s) : HAL CCSD
Résumé : Two major findings emerge from the theoretical analysis of Transport-Tourism link via a game theory type model of capacity coordination. Firstly the model explains the optimal capacities ratio of Transport and Tourism by the quotient of the ratio of tourism type (ratio of the length of stay in the destination and of transport duration) divided by the installation costs ratio (of transport and tourism).The corollary of this first finding gives the second outcome: The optimal transport and Tourism profit ratio is the product of the ratio of the type of tourism by the index of overcapacity conditions (a non linear combination of installation costs, and durations). From these results, it follows an interpretive grid that allows, according to tourism types, firstly to identify the optimal overcapacities by the difference between installation costs; and secondly the equilibrium ratio of profits according to the overcapacity direction and the tourism types.
Deux résultats ressortent de l’analyse théorique du lien Transport-tourisme via un modèle de coordination des capacités : l’expression et les déterminants des capacités et des profits optimaux relatifs du Transport et du Tourisme. L’article démontre que le rapport des capacités optimales de transport et de tourisme dépend du ratio comparatif de leurs coûts d’installation à celui inversé de leur poids relatif. Ce premier résultat a pour corollaire le second : le rapport d’équilibre des profits est le produit des indicateurs du type de tourisme (le ration des temps respectifs dans le transport et dans la destination) de la destination par celui identifiant les conditions de surcapacité relative. De ces résultats généraux, il suit une grille d’interprétation qui permet d’identifier d’abord le rapport optimal des capacités selon l’écart entre les coûts d’installation et le type de tourisme ; et ensuite le rapport d’équilibre des profits selon les sens des surcapacités relatives et le types de tourisme.
https://hal.univ-antilles.fr/hal-01265818

Droits : info:eu-repo/semantics/OpenAccess
hal-01265818
https://hal.univ-antilles.fr/hal-01265818
https://hal.univ-antilles.fr/hal-01265818/document
https://hal.univ-antilles.fr/hal-01265818/file/TRANP-TOUR.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The carbon capture and storage is considered as one of the solutions of reducing the effects of global warming. It consists in injecting large quantities of CO 2 in supercritical form directly into deeply located geological formations. One of the methods involves sequestration in the carbonate sedimentary rocks (sandstones and limestones) which are considered as a promising solution. The morphology of the pore network and solid skeleton defines important macroscopic prop-erties of the rock (permeability, stiffness). Modelling at micro scale of random heterogeneous materials (porous media) should be based on morphological and statistical characterisation 1,2 of the investigated microstructure. The work is focused on a reconstruction method by grains deposit 3 , for various range of pa-rameters, to obtain equivalent model of natural rock samples (oolitic limestone and fontainebleau sandstone). Generated samples satisfy morphological and statistical informations 4 which were obtained by 3D image analysis of X-ray tomography of the natural rock samples. For validation of the modelling numerical computations of mechanical and transfer properties are also provided.
14th European Mechanics of Materials Conference - EMMC14
Gothembourg, Sweden

hal-01103163
https://hal.archives-ouvertes.fr/hal-01103163

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A dense network of seismic stations has been deployed on the Kaapvaal craton (South Africa) to investigate the upper mantle seismic structures. In order to bring independent petrophysical constraints, we analyze a direct sampling of the cratonic upper mantle and determine the seismic properties of 48 mantle nodules brought up to the Earth's surface by kimberlite eruptions. Seismic properties of these nodules are calculated from the olivine and pyroxene crystal preferred orientations and the single crystal elastic constants. Despite variations in the nodules compositions, microstructures and crystallographic preferred orientations, seismic anisotropy is rather homogeneous throughout the craton. Mean S-wave anisotropy is weak (2.64 %), which is compatible with the small measured SKS wave splitting (mean delay time of 0.62 s).
ISSN: 0094-8276

hal-01389119
http://hal.univ-reunion.fr/hal-01389119
http://hal.univ-reunion.fr/hal-01389119/document
http://hal.univ-reunion.fr/hal-01389119/file/BenIsmail_GRL_kaapvaal_GRL2001.pdf
DOI : 10.1029/2000GL012419

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The easternmost part of the Neoproterozoic Araçuaí belt comprises an anatectic domain that involves anatexites (the Carlos Chagas unit), leucogranites and migmatitic granulites that display a well-developed fabric. Microstructural observations support that the deformation occurred in the magmatic to submagmatic state. Structural mapping integrating field and anisotropy of magnetic susceptibility (AMS) revealed a complex, 3D structure. The northern domain displays gently dipping foliations bearing a NW-trending lineation, southward, the lineation trend progressively rotates to EW then SW and the foliation is gently folded. The eastern domain displays E-W and NE-SW trending foliations with moderate to steeply dips bearing a dominantly NS trending lineation. Magnetic mineralogy investigation suggests biotite as the main carrier of the magnetic susceptibility in the anatexites and ferromagnetic minerals in the granulites. Crystallographic preferred orientation (CPO) measurements using the electron backscatter diffraction (EBSD) technique suggest that the magnetic fabric comes from the crystalline anisotropy of biotite and feldspar grains, especially. The delineation of several structural domains with contrasted flow fabric suggests a 3D flow field involving westward thrusting orthogonal to the belt, northwestward orogen-oblique escape tectonics and NS orogen-parallel flow. This complex deformation pattern may be due to interplay of collision-driven and gravity-driven deformations.
ISSN: 0191-8141

hal-00903878
https://hal.archives-ouvertes.fr/hal-00903878
DOI : 10.1016/j.jsg.2013.08.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Mantle-derived xenoliths hosted by melilitite lavas from In Teria (Ahaggar, SE Algeria) include garnet and spinel peridotites, pyroxenite and phlogopite megacrysts. The spinel and garnet peridotites record an early deformation event, which formed porphyroclastic microstructures and olivine crystal preferred orientations, followed by static infiltration of hydrous alkaline melts. This metasomatic stage (stage 1) is characterized by the crystallization of phlogopite in the garnet and spinel peridotites, amphibole in the spinel peridotites and clinopyroxene in the garnet peridotite, which record chemical equilibration with an alkaline silicate melt. These early events were largely overprinted by carbonatitic metasomatism (stage 2), which is observed only in the spinel peridotites. Spinel peridotite major and trace element compositions, as well as the compositions of newly formed minerals, are characteristic of interaction with carbonate melt, associated with strong enrichment in incompatible trace elements in clinopyroxene. This second stage was followed by crystallization of pyroxenites (stage 3) in vein conduits, probably segregated from alkaline melts. We propose a scenario in which the different metasomatic imprints record successive stages of interaction between lithospheric mantle and sublithospheric melts throughout the Cenozoic. In Sr–Nd isotope space, the host melilitites and several xenoliths are clustered and plot close to the HIMU mantle end-member. However, some peridotite xenoliths are shifted towards more radiogenic 87Sr/86Sr values. In 207Pb/204Pb–206Pb/204Pb and 208Pb/204Pb–06Pb/204Pb space the In Teria samples define a relatively large domain characterized by high 206Pb/204Pb and 208Pb/204Pb, consistent with a contribution of an HIMU component, considered to represent a sublithospheric signature. The highest 87Sr/86Sr values are comparable with those ascribed to the EM1 mantle end-member, representing the signature of the lower continental lithosphere, and are probably inherited from the pre-metasomatic lithospheric mantle beneath In Teria. Numerical modelling of porous percolation of melt of sublithospheric origin through an EM1-like lithospheric mantle protolith reproduces the In Teria peridotite compositions, using moderately sub-chondritic Sr/Nd values for the peridotite (e.g. In Teria garnet peridotite) and moderately super-chondritic Sr/Nd values in the melt (approximately ocean island basalt values). A few spinel peridotites require a component characterized by a 143Nd/144Nd signature higher than both the EM1 end-member and the local Ahaggar basalts; the 208Pb/204Pb compositions of several samples point to a component with a depleted mid-ocean ridge basalt (MORB) mantle (DMM) signature. Thus the lithospheric mantle beneath In Teria probably did not have a uniform EM1 signature before the onset of metasomatism; it included a DMM peridotite component as well as some peridotites with elevated 143Nd/144Nd values recording long-term LREE depletion.
ISSN: 0022-3530

hal-01356781
https://hal.archives-ouvertes.fr/hal-01356781
DOI : 10.1093/petrology/egw009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Microstructures, U-Pb SHRIMP zircon ages and temperature estimates were used to constrain the fabric evolution and timing of mylonitisation in the Patos shear zone (NE Brazil). Melt-bearing HT-mylonitic orthogneiss displays solid-state fabrics with coarse quartz ribbons and sutured grain boundaries. K-feldspar is often fractured and shows peripheral myrmekite. The textures typically become magmatic at the contacts with the Espinho Branco anatexite. Zircon crystals from two samples of the leucosome show Paleoproterozoic (ca. 2.2 Ga) inherited cores that are enveloped by recrystallised Neoproterozoic rims. These zircon grains define a discordia with lower intercept ages of 558 and 562 Ma but with large analytical errors. A leucogranite with transitional contacts with host diatexites provides a well-constrained zircon mean age of 566 ± 6 Ma (n = 15, 95% conf.), which is considered the best estimate for the peak metamorphic conditions. The transition from HT-mylonites to fine-grained mylonites and ultramylonites is marked by a progressive grain size reduction assisted by recrystallisation. Quartz crystallographic fabrics display [0 0 0 1] concentrations between Z and Y. K-feldspar and plagioclase fabrics record the activity of the (0 1 0)[0 0 1] and (0 1 0)[1 0 0] slip systems and, in the lower-temperature tectonites, the (1 0 0)[0 1 0] slip system. These results suggest a diachronic evolution in which an initial HT northern domain was deformed by intracrystalline slip and melt-assisted granular flow, followed by medium- to low-temperature solid-state creep in the southern shear zone domain. The mylonites therefore record the rheological heterogeneities responsible for the formation of a late continental shear zone that nucleated under partially molten conditions and was later reactivated through melt-absent strain localization following exhumation.
ISSN: 0301-9268

hal-01053497
https://hal.archives-ouvertes.fr/hal-01053497
DOI : 10.1016/j.precamres.2013.12.020

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776

Éditeur(s) : HAL CCSD Pergamon
Résumé : This paper presents an experimental study of the deformation of Beaucaire marl subjected to drained triaxial tests under a wide range of confining pressure. Several methods of observation have been used: X-ray computed tomography, scanning electronic microscopy, quantitative image analysis of thin sections and mercury porosimetry. The analysis at the grain scale shows the existence of various deformation modes depending on the mean stress level. These modes are classified with reference to the brittle and ductile regimes. In specimens deformed under low confining pressure, macro-cracks are localised in a band more contracting than the rest of the specimen. In specimens deformed under moderate confining pressure, a series of micro-scale shear bands characterised by a grain re-orientation towards the direction of macro-shear is detected in the zones of localised deformation. The material in between the micro-scale shear bands is contracting more than the rest of the specimen in some cases; in other cases, a schistosity is detected also in the rest of the specimen outside the localisation zones. In the specimen deformed under high confining pressure, no localisation occurs, and a schistosity is observable throughout the specimen.
ISSN: 1365-1609

hal-00411208
https://hal.archives-ouvertes.fr/hal-00411208
DOI : 10.1016/j.ijrmms.2007.08.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid–rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6–8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S–C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe–Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S–C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na0.05 K0.86 (Al 1.77 Fe0.08 Mg0.15) (Si3.22 Al0.78) O10 (OH)2. They are enriched in Fe and Mg compared to the detrital micas. Newly-formed chlorites are associated with micas along the shear planes. According to microprobe analyses, they present the following structural formula: (Al1,48 Fe2,50 Mg1,84) (Si2,82 Al1,18) O10 (OH)8. All these data suggest that these clay minerals are synkinematic and registered the fault activity. In the gouge samples, illite and chlorite are the major clay minerals; smectite is locally present in some samples.In the foliated sandstones, Kubler Index (KI) ((001) XRD peak width at half height) data and thermodynamic calculations from synkinematic chlorite chemistry suggest that the main fault deformation occurred under temperatures around 220 °C (diagenesis to anchizone boundary). KI measured on pelites and sandstones from the hanging and footwall, display similar values coherent with the maximal burial temperature of the Annot sandstones in this area. The gouge samples have a higher KI index, which could be explained by a reactivation of the fault at lower temperatures during the exhumation of the Annot sandstones formation
ISSN: 0191-8141

hal-01172423
https://hal.archives-ouvertes.fr/hal-01172423
DOI : 10.1016/j.jsg.2015.03.012

Éditeur(s) : HAL CCSD
Résumé : This study is designed to improve the understanding of structural, mechanical and petrophysical characteristics of deformation bands in porous sandstone such as their potential influence on fluid storage or migration in reservoir setting. Structural and petrophysical analysis of band networks from Provence show that permeability of band is mainly controlled by the degree of cataclasis and diagenetic processes at depth. Map-scale analysis of band networks underlines the major influence of tectonic regime on band distribution, organization and permeability. Band associated to normal-fault regime (cataclasis and low-permeability) are located around map-sclae-fault whereas band associated to thurst-fault regime (moderate cataclasis and permeability) are pervasively distributed in all the area. Reverse-sense band are cataclastic and low-permeabiilty around the Roquemaure thrust, which show the potential role of large-scale fault on structural and petrophysical characteristics of bands. This analysis also shows the influence of fault propagation on formation of low permeability catacastic bands. This analysis suggests also granulometry as factor controlling organization of band networks.A mechanical analysis of deformation bands is realized based on results from Provence. Yield envelopes of these materials are calculated from analytical solution. Triaxial tests done on sandstone (L'Etang quarry, Orange) confirm the shape of yield envelope theoretically calculated. Triaxial tests done on the poorly-lithified sands (Boncavaï quarry, Uchaux) show grain size, sorting and packing influencing yield envelope and cataclastic band localization at shallow burial depth. Stress paths are calculated for burial and tectonic event (extension and contraction) using the relationship between main stress and secondary stresses (K0) calibrated from well data. These different results are integrated into a model which allows to estimate type and structural characteristics of bands susceptible to form for a known geological setting.A structural, mechanical and petrophysical model is established form these results. This model is calibrated by permeability data from deformation bands of Provence and results from the mechanical model of strain localization. This model is also confronted to a synthesis of permeability data from literature, which confirms the influence of the different controlling parameters integrated to the model. This model is applied for two sites of uranium exploration/exploitation in porous sandstone reservoirs and validated by field observations.
Cette étude est destinée à améliorer la compréhension des caractéristiques structurales, pétrophysiques et mécaniques des bandes de déformation dans les grès poreux ainsi que de leur rôle potentiel sur la migration ou le piégeage des fluides en milieu réservoir. L'analyse structurale et pétrophysique des réseaux de bandes de Provence montre que leur perméabilité découle principalement de l'intensité de la cataclase dans leur microstructure et des processus diagénétiques qui peuvent s'y localiser avec la profondeur. L'analyse régionale de ces réseaux de bandes souligne l'influence majeure du régime tectonique sur leur distribution, leur organisation et leur perméabilité. Les bandes associées au régime normal (cataclactiques et peu perméables) sont localisées autour des failles cartographiques, tandis que les bandes associées au régime inverse (modérement cataclastiques et perméables) sont distribuées dans toute la région. Les bandes inverses sont fortement cataclastiques et imperméables uniquement autour du chevauchement de Roquemaure ce qui montre le rôle potentiel de la présence de grande faille sur les caractéristiques structurales et pétrophysiques de ces bandes. D'autre part, cette analyse suggère que la granulométrie de l'encaissant peut influencer l'initiation et l'organisation des réseaux. L'analyse mécanique des bandes de déformation a ensuite été réalisée à partir des résultats obtenus en Provence. L'enveloppe de plasticité de ces matériaux est calculée à l'aide d'une solution analytique. Les essais triaxiaux menés sur le grès de la carrière de l'Etang (orange) confirment la forme de ces enveloppes estimées théoriquement. Les essais réalisés sur les sables de Boncavaï (Uchaux) montrent que la taille des grains, le tri et de la compaction dans ces matériaux peu lithifiés influent sur leurs enveloppes de plasticité et la localisation des bandes cataclastiques à faibles profondeurs. Les trajets de contraintes sont estimés pour les phases d'enfouissement et de chargement tectonique (extension et compression) à partir de la relation entre contrainte principale et contraintes secondaires (K0), calibrée à partir de données de forage. Ces résultats sont intégrés à un modèle permettant d'estimer la nature et les caractéristiques structurales des bandes susceptibles de se former dans un contexte géologique donné. Un modèle structural, mécanique et pétrophysique a été établir à partir de ces différents résultats. Ce modèle est calibré à partir des données de perméabilité mesurées sur les bandes de Provence et des résultats du modèle mécanique de localisation cité précédemment. Ce modèle a ensuite été confronté à une synthèse des données de perméabilité disponibles dans la littérature et confirme l'influence des différents paramètres de contrôle pris en compte dans le modèle. Ce modèle a enfin pu être appliqué sur deux sites d'explorations/exploitations d'uranium en réservoir gréseux poreux et validé par les résultats obtenus, en concordance avec les observations de terrain.
https://tel.archives-ouvertes.fr/tel-01001389

NNT : 2013MON20067
tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389/document
https://tel.archives-ouvertes.fr/tel-01001389/file/36072_BALLAS_2013_archivage-1_cor.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
We report new textural and chemical data for 10 garnet peridotite xenoliths from the Udachnaya kimberlite and examine them together with recent data on another 21 xenoliths from the 80-220 km depth range. The samples are very fresh (LOI near zero), modally homogeneous and large (>100 g). Some coarse-grained peridotites show incipient stages of deformation with <10 % neoblasts at grain boundaries of coarse olivine. Such microstructures can only be recognized in very fresh rocks, because fine-grained interstitial olivine is strongly affected by alteration, and may have been overlooked in previous studies of altered peridotite xenoliths in the Siberian and other cratons. Some of the garnet peridotites are similar in composition to low-opx Udachnaya spinel harzburgites (previously interpreted as pristine melt extraction residues), but the majority show post-melting enrichments in Fe and Ti. The least metasomatized coarse peridotites were formed by 30-38 % of polybaric fractional melting between 7 and 4 GPa and ≤1-3 GPa. Our data together with experimental results suggest that garnet in these rocks, as well as in some other cratonic peridotites elsewhere, may be a residual mineral, which has survived partial melting together with olivine and opx. Many coarse and all deformed garnet peridotites from Udachnaya underwent modal metasomatism through interaction of the melting residues with Fe-, Al-, Si-, Ti-, REE-rich melts, which precipitated cpx, less commonly additional garnet. The xenoliths define a complex geotherm probably affected by thermal perturbations shortly before the intrusion of the host kimberlite magmas. The deformation in the lower lithosphere may be linked to metasomatism.
ISSN: 0010-7999

hal-00941252
https://hal.archives-ouvertes.fr/hal-00941252
DOI : 10.1007/s00410-013-0855-8