Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Tectonics, v. 27, p. TC5011, 2008. http://dx.doi.org/10.1029/2007TC002232
International audience
The seismic activity of the Ligurian Basin, the northeastern termination of the western Mediterranean basin, is larger than in surrounding regions, even though recent geodetic studies attest that this area is subject to very low levels of deformation. This basin is an example of a type of passive margins that cannot be considered solely as inert sites of sedimentation and of progressive subsidence and that are reactivated in a compressive pattern; other examples include the Kwanza basin (Angola) and the Brazil margin. We investigated, by means of 2-D thermomechanical modeling, the structural and rheological heterogeneities that can lead to concentration of strain in this marginal basin. We deduced that the deformation of the basin is due to its particular geometric features, narrow and with a thick surrounding continental crust, related to its position at the southern termination of the Alps. This sharp transition, in terms of both geometry and rheological contrast, is a main factor in explaining the weakness of the margin. We discuss the importance of buoyancy forces versus tectonic forces, as well as thermal effects, on the observed reactivation. Influence of contrast in rheology between an oceanic-type crust and continental crust is also studied. Geodynamical implications are proposed for the region. The good agreement between the predicted localized deformation and the observed seismicity distribution should help improve seismic hazard assessment in the region.
ISSN: 0278-7407

hal-00407859
https://hal.archives-ouvertes.fr/hal-00407859
DOI : 10.1029/2007TC002232

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The NW-trending Talas-Ferghana Fault (TFF) in Kyrgyzstan, Central Asia, is one of the largest intracontinental strike-slip faults in the world. It extends over a distance of more than 2000 km from southern Tourghai to western Tarim and exhibits a maximum dextral offset of ∼200 km during the late Palaeozoic to present. The history of the fault provides important insights for the understanding of the evolution of southern Central Asia but remains poorly constrained due to lack of reliable geochronological data. We present new Ar-Ar ages and structural data from the Kyrgyz West Tianshan, that elucidate the kinematic history of the TFF in the Palaeozoic and Mesozoic. 40Ar/39Ar ages on mylonitic white micas document a deformational history consisting of several episodes. A late Carboniferous age of 312 ± 4 Ma point to initiation of top-to-the-south and dextral transpressional deformation during a metamorphic overprint in Precambrian and Palaeozoic rocks along the northern compartment of the TFF. The main phase of dextral motion along the entire fault occurred in the Permian as suggested by minimum ages of 260-290 Ma obtained at two different locations in the NW and central parts of the TFF. Partial isotopic resetting occurred between 240 and 210 Ma and younger ages of <200-210 Ma are ascribed to late brittle reactivation and hydrothermal fluid flow in the Late Triassic to Early Jurassic times. The Jurassic trans-tensional phase is featured by emplacement of 195 ± 3 Ma pegmatitic dykes. The Ar-Ar mineral ages and structural data argue for a major phase of dextral shearing, affecting the entire region from the West Tianshan to Mongolia in the late Permian and leading to formation of almost equally spaced major NW-trending dextral strike-slip faults. The uniform character of this deformation indicates that the process of amalgamation in this part of the CAOB ended prior to the late Permian, and Central Asia evolved as a single coherent continental block since that time.
ISSN: 0743-9547

hal-00831326
https://hal.archives-ouvertes.fr/hal-00831326
DOI : 10.1016/j.jseaes.2013.02.012

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : The Latest Cretaceous/Paleocene paleokarsts from Bas-Languedoc (South of France) are characterized by : 1) exokarstic paleosurfaces (sink holes, pinnacles, canyons) which are mostly superimposed onto the Late Jurassic limestones and partly filled up with breccias and sandy clays containing Paleocene planktonic foraminifera; 2) endokarstic cavities filled up by sandy pelites and laminated mudstones with similar micropaleontological assemblage. All these cavities constitute three cut-and-filled paleokarstic systems. A general model of formation for this polyphase system is proposed. These paleosurfaces are generated by a Latest Cretaceous tectonic phase and Paleocene movements associated with eustatic rises inducing rapid floodings. During Upper Danian-Lower Selandian times three successive base levels drops, whose cumulated duration could be as long as 3 Ma, have induced several hundred metres of incisions within the exposed Jurassic carbonate series. A paleogeographic reconstruction shows three main marine gulfs which extend towards NE the EW Pyrenean thrust belt ("Pyrenean Paleocene Trough", PPT) located on the axis of the future Pyrenees. The similarity of the facies and micropaleontological content in the two domains suggests connexions between the marine Paleocene deposits of Bas-Languedoc and the PPT. It could thus explain the succession of the same tectono-eustatic events. We propose, as an hypothesis, that the rapid sea-level changes, as recorded by the imbricated karstic paleomorphologies, could be induced by the closing and the opening of a strait in the Eastern part of the PPT acting as a sill. This would be controlled by tectonic movements along the active orogenic axis of the Pyrenean Range and eustatic variations of the Paleocene World Ocean. The karstic systems developed during these low-stand episodes may have been later reactivated after the Early Selandian and more specifically during the Messinian desiccation event. This late evolution may have generated deep flooded karsts, now situated below the present sea level. Such karsts, partly inherited from Paleocene, could be important aquifers of economic interest.
ISSN: 0985-3111

hal-00407601
https://hal.archives-ouvertes.fr/hal-00407601
DOI : 10.3166/ga.20.301-326

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The objective of this study was to realize a three-dimensional (3-D) geological model of the deep basin structure of the Middle Durance region (of folds and faults) by integration of geological and geophysical data, and to evaluate its fault geometry and tectonic history. All of the available geophysical and geological data were compiled in three dimensions using the gOcad geomodeler. The geological and geophysical data were used to build a 3-D geological model of the Middle Durance region. The data on the 3-D geometry of fault surfaces and stratigraphic horizons and the thickness maps of the main stratigraphic units are supported by the 3-D geological model. We show that the Middle Durance Fault cannot be interpreted as a single fault plane that affected the entire Meso-Cenozoic sedimentary layers and the Paleozoic basement but as a listric segmented faulting system in sedimentary layers, rooted in Triassic evaporites and a normal block faulting system in the basement. This decoupling level in the Triassic layers reveals thin-skin deformation, formed by strong mechanical decoupling between the Mesozoic sedimentary cover and the Paleozoic basement. This study also confirms that the Provence geological structure has resulted mainly from Pyrenean deformation, which was partly reactivated by Alpine deformation. We demonstrate that the Middle Durance Fault Zone is a transfer fault that accommodates deformation of the sedimentary filling of the South-East Basin through modified fold geometry over a zone of 7 km to 8 km around the main segment of the fault zone.
ISSN: 0278-7407

hal-01172221
https://hal.archives-ouvertes.fr/hal-01172221
DOI : 10.1002/2014TC003749

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Active faults from the Campo de Dalías (SE Betic Cordillera) allow us to constrain the deformation styles involved in the development of segmented oblique-slip faults. This sector constitutes the widest outcrop of Plio-Quaternary sediments in the northern boundary of the Alboran Sea. It has emerged since the Late Pliocene, and therefore provides recent deformation markers that are not disturbed by erosive processes. The faults started to grow during the Pleistocene, reactivating previous hybrid joints, with a normal-dextral slip. We present a detailed map of the largest fault in the area, the Loma del Viento fault, comprising six onshore segments. Based on field work and aerial photography, the distributions of the contiguous joints have been mapped, and the joints reactivated as faults are identified. Some of these fault segments are hard-linked, and fault slip enhances toward the linkage sectors between them with associated sedimentary depocenters. An electrical tomography profile reveals the wedge geometry of a unit of Pleistocene conglomerates and red silts that were coevally deposited during the fault movement. Long-term slip rate in the central part of the fault is estimated at 0.07 ± 0.03 mm/y. In addition, a seismic crisis nucleated close to the Loma del Viento fault during November 2010 was recorded. Moment tensor analysis of the two mainshocks (Mw 3.5 and 4.2) provides a focal solution indicating a N120°E striking right-lateral strike-slip fault. The corrugated morphology of the Loma del Viento fault may have influenced its seismic behavior. Some of the fault segments are oblique to the general motion of the fault. These oblique segments would provide higher resistance against the general fault motion and could lock the fault, leading to accumulate elastic energy.
ISSN: 0040-1951

hal-00750357
https://hal.archives-ouvertes.fr/hal-00750357
DOI : 10.1016/j.tecto.2011.12.001

Résumé : Les particules qui se déposent au niveau du compartiment sédimentaire contiennent très souvent des substances chimiques réactives. Celles-ci sont généralement en déséquilibre dans ce nouvel environnement. Elles évoluent au cours de leur enfouissement et sont alors responsables des phénomènes de diagenèse précoce. Les substances organiques sont en particulier sujettes à une forte dégradation sous l'effet de l'activité bactérienne. Cette dégradation s'accompagne de deux phénomènes importants: l'enrichissement en éléments nutritifs et l'appauvrissement en substances oxydantes. La composition des eaux interstitielles est alors affectée.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00082/19369/16963.pdf
http://archimer.ifremer.fr/doc/00082/19369/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the evolution of concepts on and methods of estimating the state of stress from fault movements. Theories of failure in isotropic materials suggested a simple geometrical construction of optimal principal stress directions from a fault plane and its associated slip. These optimal directions align shear stress and slip directions and maximize the difference between shear stress and frictional resistance on the fault plane. Optimal stress directions for calcite twinning are obtained by a similar construction, with the difference that they maximize shear stress. Force representation of seismic sources independently introduced pressure, P, and tension, T, axes at positions that also maximize shear stress on both nodal planes. Frictional slip theory and the constraint that slip and shear stress directions be parallel allowed to address reactivation of pre-existing faults. This suggested that stress could also be inverted from reactivated fault and slip data or earthquake focal mechanisms. Early methods relied on geometrical constructions as a substitute for calculations, whereas later methods relied on software as these calculations became tractable with the help of computers. Similar methods were developed for the inversion of stress from crystal twin gliding with non-optimal geometry, with a different criterion that relies on a threshold of the component of shear stress along the gliding line. Even though these methods seek a common stress tensor compatible with fault and slip data, their main use is to separate polyphase data into homogeneous subsets and help deciphering complex tectonic histories. Fault and slip data can also be analyzed to constrain the strain rather than the stress tensor. In most cases this involves a summation and yields an average strain for the considered rock volume. Stress inversion thus appears better suited for differentiating heterogeneous data whereas strain analysis appears better suited for homogenizing them.
ISSN: 0040-1951

hal-00759043
https://hal.archives-ouvertes.fr/hal-00759043
DOI : 10.1016/j.tecto.2012.02.009

Éditeur(s) : HAL CCSD
Résumé : International audience
In the external Western Alps, the collision started with the shortening of the proximal European (Dauphinois) margin. One peculiar feature is the crustal thickening that finally led to the exhumation of the basement External Crystalline Massifs (ECM) during the Neogene. In these massifs, various age of shortening, structural style and sequence of deformation have been proposed leading to different kinematics along the Alpine arc that in turn do not imply the same crustal/lithospheric strength. In this contribution, we present new structural and microstructural data along with Ar/Ar ages from field studies in the Oisans-Grandes Rousses massifs, between Grenoble and Briançon). From balanced cross-sections, we show that about half of the external zone crustal shortening is accommodated within the ECM with similar Ar/Ar ages in all massifs. Furthermore, the shear zones present very large thicknesses (several hundred meters) and do not reactivated either the inherited Liassic normal faults or the Variscan foliation. Finally, the main shortening structures are localized beneath inherited Liassic syn-rift basins. These results suggest that the crust was weak during its shortening. Such behavior is most likely due to the combination of several factors: the crust burial (below the overthrusting internal units) down to about 10km, the presence of weak inherited syn-rift basins, and the strain softening in shear zones that evolve in mica-rich phyllonites. These results are consistent with the studies in the Aar massif and should most likely apply to the Mont Blanc massif, whose relationships with its cover are still debated.
EGU General Assembly
Vienne, Austria

insu-00839426
https://hal-insu.archives-ouvertes.fr/insu-00839426
BIBCODE : 2013EGUGA..15.8837B

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome-like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The 206Pb/238U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re-heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma-rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.
ISSN: 0263-4929

hal-01468009
https://hal.archives-ouvertes.fr/hal-01468009
DOI : 10.1111/jmg.12214

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
Leishmania parasites can escape the immune response by invading cell types lacking leishmanicidal mechanisms. Silent persistence of Leishmania parasites in the host organism is responsible for asymptomatic carriage and relapses after cured leishmaniasis. Here, we studied the interaction between Hepatic Stellate Cells (HSC) and Leishmania. An original model of human HSC in primary culture infected with L. donovani was developed. The presence of intracellular parasites was studied and quantified using optical and confocal microscopy. HSC characteristics were studied using microscopy, methylene blue assay, long-term cultures and qPCR. We showed for the first time that human HSC are permissive to L. donovani infection, with no modification of HSC survival, growth rate and proinflammatory and fibrogenic characteristics. Intracellular parasites did not replicate but HSC had no effect on their survival. Indeed, after a 40-day culture, infected HSC cultures transferred on NNN medium yielded new promastigotes that were able to proliferate and efficiently infect new cells. HSC are permissive to L. donovani, with neither parasite killing nor apparent cell damage. Thus, HSC could act as potent sanctuary cells for Leishmania in the liver, which could partially explain parasite reactivation after an asymptomatic carriage or a cured visceral leishmaniasis.
ISSN: 0031-1820

inserm-00825803
http://www.hal.inserm.fr/inserm-00825803
DOI : 10.1017/S0031182012001965
PUBMED : 23253952

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Madeira Sn-Nb-Ta deposit corresponds to the albite-enriched facies of Madeira granite (Madeira Suite) that is part of a NE-SW alignment of three granitic bodies. Structural analyses suggest that the albite-enriched granite emplacement and development of related structures occurred in a different tectonic setting than earlier facies of the granitic bodies in the NE-SW alignment and that the structure was dominated by a N-NE-trending shortening related to a left-lateral motion along a NE-SW corridor within a Riedel shear. Three types of structures (flat-lying, near vertical fractures, and geodes/miaroles) concentrated the last magmatic-related fluid in the albite-enriched granite. U-Pb in situ zircon dating of the albite-enriched granite yielded an age of 1,822 ± 22 Ma. The other granitic plutons of the Madeira Suite, Água Boa granite (topaz-granite facies), and Europa per-alkaline granite formed at 1,825 ± 14 Ma, 1,831± 11 Ma, and 1,839 ± 10 Ma, respectively. The granite bodies of the Madeira Suite occur in an area occupied by a cauldron complex composed of volcanic sequences (Iricoumé Group) and associated A-type granites (Mapuera Suite), and their formation was controlled by the reactivation of the cauldron structures and the pre-existing structures. The gap between the cauldron complex and the Madeira Suite is no greater than 35 Ma. The geological evolution was reanalyzed from the perspective of an entire extensional environment where three successive episodes of A-type magmatism and basin formation (Urupi Formation) occurred. The data and interpretations of this work imply crucial constraints on the petrologic models proposed for the albite-enriched granite and, consequently, on the genesis of the Madeira deposit
ISSN: 0301-9268

insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888/document
https://hal-insu.archives-ouvertes.fr/insu-00939888/file/BastosNeto-PrecambrianResearch-2014.pdf
DOI : 10.1016/j.precamres.2013.12.021

Éditeur(s) : HAL CCSD Geological Society
Résumé : Polygonal faults, mainly oriented N50, N110 and N170, are abundant in the upper part of the mud-dominated Kai Formation (upper Miocene-lower Pliocene) of the Voting Basin. A second, less-developed tier of polygonal faults, oriented N20, N80 and N140, exists at the base of the overlying Naust Formation (upper Pliocene-Present). The faults abruptly terminate upward below a thick interval of debris flows. We propose a dynamic model in which: (1) the development of polygonal faults discontinues temporarily as a result of a change in regional sedimentation, leading to inactive polygonal faults; (2) rapid emplacement of debris flows in the late Pleistocene creates a new interval of polygonal faults in the lower part of the Naust Formation immediately beneath the debris flow and some faults penetrate into the underlying Kai Formation; (3) some polygonal faults within the Kai Formation are reactivated and propagated upward into the base of the Naust Formation. The high interconnectivity between faulted layers allows the fluids to reach shallower depths, forming well-expressed pipes and pockmarks on the sea floor. The model of cessation/reactivation of polygonal faults constrains the sealing capacity of sedimentary cover over the reservoirs and helps to reconstruct the fluid migration history through the sedimentary column.
ISSN: 0016-7649

hal-00406645
https://hal.archives-ouvertes.fr/hal-00406645
DOI : 10.1144/0016-76492005-178

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene-lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 degrees C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of similar to 208 degrees C and a burial depth of similar to 5.7 km. The second stage corresponds to a fault reactivation at a temperature of similar to 240 degrees C and a burial depth of similar to 6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene-early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.
ISSN: 0191-8141

hal-00644828
https://hal.archives-ouvertes.fr/hal-00644828
DOI : 10.1016/j.jsg.2011.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field study, thermochronology and geochemistry of the east Lungmu Co (LMC) range highlight some of the geological events that shaped western Tibet. The LMC fault zone has long been interpreted as the boundary between the Tianshuihai terrane of Laurasian affinity and the Qiangtang block of Gondwanian affinity. In the LMC range, the Paleozoic series is intruded by the Mangtsa leucogranite whose zircon have a U/Pb age of 116.9 ± 1 Ma and by mafic rocks with U/Pb zircon ages ranging from 116.9 ± 1 to 95.1 ± 1.7 Ma. Geochemistry of the mafic rocks indicates that they have been emplaced in a supra-subduction zone setting, probably the north dipping Nujiang suture zone. 40Ar/39Ar micas ages of the granite indicate that cooling below ~ 350 °C occurred between 105 and 85 Ma. 40Ar/39Ar K-feldspar data suggest a fast cooling event at 60-55 Ma, which we relate to the reactivation of the LMC suture zone as a thrust at the onset of the India-Eurasia collision. The last, and still active, deformation event corresponds to left-lateral strike-slip faulting along the ENE-WSW LMC fault.
ISSN: 1342-937X

hal-00660491
https://hal.archives-ouvertes.fr/hal-00660491
DOI : 10.1016/j.gr.2011.07.026

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Selected high-resolution seismic-reflection profiles and multibeam bathymetry acquired along the convergent Ecuador margin during the ATACAMES cruise on onboard the R/V L’Atalante (Jan.15–Feb.18, 2012) allow a preliminary evaluation of the neotectonic development and stratigraphic evolution of the margin based on the sismo-stratigraphic analysis of Quaternary sediment preserved on the margin shelf and upper slope. We present three major preliminary results. (1) The evolution of the Esmeraldas, Guayaquil and Santa Elena canyons. The head of the Esmeraldas canyon is the location of a continuous significant sediment transport. The Guayaquil canyon shows several episodes of deposition and incision. Aggrading sedimentation pattern in the canyon records several changes in relative sea-level. The subsidence of the Gulf of Guayaquil probably contributes to the good preservation of the canyon filling stages. The Santa Elena canyon is controlled by a SW–NE trending normal fault. (2) Variations of sediment accumulation and relative vertical motions are shown along-strike the shelf edge. Offshore the uplifted Manta peninsula, a pronounced subsidence of the shelf edge is documented by sedimentary clinoforms that have deposited in a morphological reentrant, and have migrated upslope testifying of a local subsidence meanwhile the adjacent La Plata Island area underwent uplift. In the Esmeraldas canyon area, a local uplift of the shelf is documented. (3) Two neotectonic fault systems with a possible transcurrent component are imaged across the shelf edge and upper margin slope offshore Jama, and Cape Galera. This possible transcurrent motion could be related to the reactivation of ancient faults of the upper plate by the subduction. These preliminary results indicate that the ATACAMES data set has a strong potential to evaluate the spatial and temporal contribution of tectonic and climate changes on the structural development and stratigraphic evolution of the Ecuador continental margin.
ISSN: 0025-3235

insu-01131151
https://hal-insu.archives-ouvertes.fr/insu-01131151
DOI : 10.1007/s11001-014-9231-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.
ISSN: 0040-1951

hal-00424533
https://hal.archives-ouvertes.fr/hal-00424533
DOI : 10.1016/j.tecto.2008.04.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : The relationship between deformation and so-called fluid paleotransfers in minor faults has been analysed in an argillaceous formation located in the Causses Basin in France. The fluid paleotransfers are related to the fault activity to a large extent. We attempt to estimate the intensity of paleo-deviatoric stress magnitudes under which the fault activity may have occurred and consequently, the change in the structural fault permeability. The paleo-deviatoric stress magnitudes were calculated with the inverse method of Etchecopar applied to calcite twinning. The measured crystals are contained within the core zone of minor faults and this study is based on a previous complete microtectonic and microstructural analysis of the faults. In this paper, analysis of calcite twinning has been applied for the first time to vein fillings associated small faults in a context of relatively weak deformation, a condition ensured by the tectonic and structural analysis. Calculation and discussion of the paleo-deviatoric stress tensors in relation to the evolution of the structural fault permeability and to the hydraulic behaviour of the faults are the aim of this paper. The analysed faults, created and active during the same tectonic event, were permeable under a (;σ;1;–;σ;3;) mean value of 40–50 MPa. On the other hand, the reactivation of faults during a second tectonic event implies mean (;σ;1;–;σ;3;) value higher than 40–50 MPa, especially for the faults that are poorly oriented with respect to the principal tectonic stress directions. The core zone of these faults remained sealed and impermeable or became permeable by development of microcracks inside the pre-existing fillings.
ISSN: 0040-1951

hal-00407577
https://hal.archives-ouvertes.fr/hal-00407577
DOI : 10.1016/j.tecto.2006.09.014

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mechanism and kinematics of the Late Mesozoic continental extension event of eastern Asia are still debated. In order to better constrain its evolution, two granodioritic plutons of the Jiaodong Peninsula have been chosen as targets for a time-constrained palaeomagnetic study. Indeed, plutons are devoid of visible deformation, did not experience rotation along horizontal axis and are precisely dated by U/Pb and 40Ar/39Ar methods. Multidomain (MD) magnetite has been identified as the principal magnetic remanent carrier. The interpolation of existing and new U/Pb and 40Ar/39Ar ages revealed that characteristic remanent magnetisation was acquired in a narrow range of 116 ± 2 Ma. Twenty out of 27 sites present stable magnetic directions calculated from high-temperature or high-coercive components. The observations of the solo normal magnetic polarity for this palaeomagnetic collection and of the magnetic remanent age consistent with the Cretaceous Normal Superchron (CNS) argue that the characteristic magnetic remanence may be considered as primary. Detailed field observations of the intrusive relationship between the plutons and country rocks and Anisotropy of Magnetic Susceptibility (AMS) study reveal the absence of the subsequent deformation of plutons, or rigid rotation of plutons along a horizontal axis. Two palaeomagnetic poles have been therefore calculated from these plutons. Among 12 out 15 Cretaceous palaeomagnetic poles, including the two new poles provided by this study, from the Jiaodong Peninsula and on both sides of Tan-Lu and Muping-Jimo faults are statistically consistent. As a result, the Jiaodong Peninsula behaved as a rigid block as internal deformation appears negligible. The remaining three derived poles are probably due to the secular variation or/and the vicinity of fault zones near of the palaeomagnetic sampling site. Thus, they can not be applied to the peninsula-scaled tectonics. Comparison of these time52 constrained Cretaceous palaeomagnetic results of the Jiaodong Peninsula with those of North China Block (NCB) indicate that the Jiaodong Peninsula was rigidly attached to NCB since, 3 at least, the Cretaceous as residual difference is clearly insignificant with respect to the error brackets. These new palaeomagnetic results confirm that the relative clockwise (CW) rotation of Eastern Liaoning-Korea Block (ELKB) with respect to NCB does not affect the Jiaodong Peninsula as a rigid block, nevertheless, some tectonic structures have been reactivated since Cenozoic and local rotations could be produced. This palaeomagnetic study reveals that the Late Mesozoic extension in Eastern Asia is heterogeneously expressed in time and space. The complete understanding of the mechanism(s) of this extensional event needs further multidisciplinary investigations.
ISSN: 0031-9201

insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546/document
https://hal-insu.archives-ouvertes.fr/insu-00599546/file/Charles_et_al_PEPI2011.pdf
DOI : 10.1016/j.pepi.2011.05.006