Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Microbathymetry data, in situ observations, and sampling along the 13°20′N and 13°20′N oceanic core complexes (OCCs) reveal mechanisms of detachment fault denudation at the seafloor, links between tectonic extension and mass wasting, and expose the nature of corrugations, ubiquitous at OCCs. In the initial stages of detachment faulting and high-angle fault, scarps show extensive mass wasting that reduces their slope. Flexural rotation further lowers scarp slope, hinders mass wasting, resulting in morphologically complex chaotic terrain between the breakaway and the denuded corrugated surface. Extension and drag along the fault plane uplifts a wedge of hangingwall material (apron). The detachment surface emerges along a continuous moat that sheds rocks and covers it with unconsolidated rubble, while local slumping emplaces rubble ridges overlying corrugations. The detachment fault zone is a set of anostomosed slip planes, elongated in the along-extension direction. Slip planes bind fault rock bodies defining the corrugations observed in microbathymetry and sonar. Fault planes with extension-parallel stria are exposed along corrugation flanks, where the rubble cover is shed. Detachment fault rocks are primarily basalt fault breccia at 13°20′N OCC, and gabbro and peridotite at 13°30′N, demonstrating that brittle strain localization in shallow lithosphere form corrugations, regardless of lithologies in the detachment zone. Finally, faulting and volcanism dismember the 13°30′N OCC, with widespread present and past hydrothermal activity (Semenov fields), while the Irinovskoe hydrothermal field at the 13°20′N core complex suggests a magmatic source within the footwall. These results confirm the ubiquitous relationship between hydrothermal activity and oceanic detachment formation and evolution.
ISSN: 1525-2027

hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973v2/document
https://hal.archives-ouvertes.fr/hal-01571973/file/Escart-n_et_al-2017-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2016GC006775

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The Ganos fault is the westernmost segment of the North Anatolian Fault that experienced the Mw = 7.4 earthquake of 9 August 1912. The earthquake revealed 45-km-long of surface ruptures inland, trending N70 E, and 5.5 m of maximum right lateral offset near Güzelköy. The long-term deformation of the fault is clearly expressed by several pull-apart basins and sag ponds, pressure and shutter ridges and offset streams. In parallel with detailed geomorphologic investigations, we measured co-seismic and cumulative displacements along the fault, and selected the Güzelköy site for paleoseismology. A microtopographic survey at the site yields 10.5 0.5 m and 35.4 1.5 m cumulative lateral offsets of stream channels and geomorphologic features. Seven paleoseismic parallel and cross-fault trenches document successive faulting events and provide the timing of past earthquakes on the Ganos fault segment. Radiocarbon dating of successive colluvial wedges in trench T1, and the fresh scarplet above (probably 1912 surface rupture) indicate the occurrence of three faulting events since the 14th century. Parallel trenches (3, 5, 6 and 7) expose paleo-channels and show a cumulative right-lateral offset of 16.5 1.5 m next to the fault, and 21.3 1.5 m total channel deflection. Radiocarbon dating of past channel units and fault scarp-related colluvial deposits imply an average 17 +/ 5 mm/year slip rate and 323 142 years recurrence interval of large earthquakes during the last 1000 years on the Ganos fault. The succession of past faulting events and inferred slip rate west of the Marmara Sea provide more constraint on the long-term faulting behavior in the seismic gap of the North Anatolian Fault and may contribute to a better seismic hazard assessment in the Istanbul region.
ISSN: 1525-2027

hal-00748218
https://hal.archives-ouvertes.fr/hal-00748218
DOI : 10.1029/2011GC003960

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The reactivation of faults with near-optimal orientations is commonly considered to control the state of stress in the crust. Near the surface, where a principal stress direction is vertical, the attitude of such faults is explained by Anderson's theory. This raises the questions of how prevalent this type of faulting actually is in current seismicity, down to what depth it frequently occurs, and what range of friction angles explains it best. The Global Centroid Moment Tensor catalog is analyzed to address these questions. Dip-slip and strike-slip mechanisms are dominant, and oblique slips are relatively rare for well-constrained events with depths shallower than 30 km. Preferred Andersonian faulting is the simplest, but not the unique, explanation for this dominance. Isolating reverse, strike- slip, and normal events reveals an asymmetry in the distribution of nodal plane dips and plunges of the P, B, and T axes between reverse and normal faulting. Assuming that the most frequent events correspond to reactivation near optimal orientations yields 40-60 degrees and 0-20 degrees friction angles for reverse and normal faults, respectively. This indicates that reverse and normal faulting mechanics are not symmetrical with respect to stress configuration as predicted by Anderson's theory.
ISSN: 8755-1209

hal-00412159
https://hal.archives-ouvertes.fr/hal-00412159
DOI : 10.1029/2007RG000240

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
Abstract The continuous record of large surface-rupturing earthquakes along the Dead Sea fault brings unprecedented insights for paleoseismic and archaeoseismic research. In most recent studies, paleoseismic trenching documents the late Holocene faulting activity, while tectonic geomorphology addresses the long-term behavior (>10 ka), with a tendency to smooth the effect of individual earthquake rupture events (Mw >7). Here, we combine historical, archaeological, and paleoseismic investigations to build a consolidated catalog of destructive surface-rupturing earthquakes for the last 14 ka along the left-lateral Jordan Valley fault segment. The 120- km-long fault segment limited to the north and the south by major pull-apart basins (the Hula and the Dead Sea, respectively) is mapped in detail and shows five subsegments with narrow stepovers (width < 3 km). We conducted quantitative geomorphology along the fault, measured more than 20 offset drainages, excavated four trenches at two sites, and investigated archaeological sites with seismic damage in the Jordan Valley. Our results in paleoseismic trenching with 28 radiocarbon datings and the archaeoseismology at Tell Saydiyeh, supplemented with a rich historical seismic record, document 12 surface-rupturing events along the fault segment with a mean interval of ∼1160 yr and an average 5 mm=yr slip rate for the last 25 ka. The most complete part of the catalog indicates recurrence intervals that vary from 280 yr to 1500 yr, with a median value of 790 yr, and suggests an episodic behavior for the Jordan Valley fault. Our study allows a better constraint of the seismic cycle and related short-term variations (late Holocene) versus long-term behavior (Holocene and late Pleistocene) of a major continental transform fault.
ISSN: 0037-1106

hal-00747401
https://hal.archives-ouvertes.fr/hal-00747401
DOI : 10.1785/0120100097

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] This article presents (U-Th)/He thermochronological data from the Longmen Shan belt, eastern Tibet. Located between the Songpan-Garze terrane and the Yangtze craton, this mountain range is one of the steepest margins of the Tibetan Plateau and an important area for the comprehension of the mechanisms that control the dynamics of such plateau borders in terms of spatial distribution of deformation or timing of topographic building. We describe several age-elevation transects and perform forward modeling of our data to derive quantitative information on the exhumation of the range. A major phase of exhumation started at 8–11 Ma, with an average rate of $0.65 mm a À1. Comparison of zircon and apatite ages indicates that the eastern part of the range may have experienced a significant decrease in exhumation since 2–3 Ma. We use the distribution of finite exhumation across the major faults of the area to quantify their dip-slip throw rate over the last 10 Ma. The Beichuan Fault, which was activated during the 2008 Sichuan earthquake, is the major active structure of the Longmen Shan since the late Miocene, with an average thrusting slip rate between 0.4 and 1 mm a À1. Conversely, over the same time period, only minor dip-slip activity occurred on the Wenchuan Fault Zone. This distribution in space and time of exhumation and deformation is discussed and compared to the different proposed models for the geodynamical evolution of the eastern Tibetan margin. It also provides an important long-term perspective to put in context the destructive 2008 Sichuan earthquake that struck the central Longmen Shan.
ISSN: 0278-7407

hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059/document
https://hal-amu.archives-ouvertes.fr/hal-01577059/file/godard2009late.pdf
DOI : 10.1029/2008TC002407

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : International audience
The paper is concerned with the kinematics of the major faults, their pattern, and the time of occurrence of compression and extension deformations in the southeast of the Eastern Sayan. The geometry of the mountain ranges and the kinematics of the major faults exhibit northeast-oriented compression responsible for the current processes of relief formation, which corresponds to the direction of the vector of deformations associated with the Indo-Asian collision. The results obtained thus far may be indicative of the remote influence of collision on the orogenic activity and transpressional deformations in the Eastern Sayan since the end of the Miocene. Morphotectonic analysis has shown that the areas of Quaternary extension- related deformations in the Eastern Sayan are not a response to active rifting in the Baikal Rift Zone. The position and geometry of the subsided blocks and magma ruptures point to the fact that they form locally as extension structural elements near the strike-slip faults. The strike-slip and thrust faults are widespread and play the leading role in the development of the southeastern part of the Eastern Sayan.
ISSN: 0016-8521

insu-00667345
https://hal-insu.archives-ouvertes.fr/insu-00667345
DOI : 10.1134/S001685211101002X

Éditeur(s) : Elsevier
Résumé : Beach sediment cementation (beachrock formation) is a sedimentary process that can transform significant sections of beaches into rock outcrops. This contribution reports the results of two questionnaire surveys (one focusing on foreign tourists and the other on local people) carried out in coastal resorts of the island of Lesbos (Greece), on the perceptions of beach users regarding the impacts of beachrocks on their recreational activities. The survey focusing on foreign tourists showed that the majority of the interviewees took notice of the formations and commented negatively on them. Although most of the interviewees did not consider beachrocks a significant safety risk, a considerable proportion of the sample stated that beachrocks influenced their beach ratings that they would prefer beachrock-free beaches and would be willing to contribute financially to preventative and protective measures. In contrast, the results of the survey focusing on local people, who are more familiar with the phenomenon, showed a high perception of beachrock-related risks and limited beachrock tolerance. In addition to the safety risks that the irregular, slippery, beachrock surfaces may pose to beach users, beachrocks may also degrade beach aesthetics. promote beach sediment erosion and decrease the beach carrying capacity. As beachrocks are a common attribute of tropical, subtropical and low-temperate beaches that are typically associated with major tourist destinations, and are likely to spread under global warming conditions, they may be considered as a significant threat to the coastal tourist industry. (c) 2008 Elsevier Ltd. All rights reserved.
Tourism Management (0261-5177) (Elsevier), 2009-08 , Vol. 30 , N. 4 , P. 544-552

Droits : 2009 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6625.pdf
DOI:10.1016/j.tourman.2008.09.007
http://archimer.ifremer.fr/doc/00000/6625/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wallace (1951) and Bott (1959) were the first to introduce the idea that the slip on each fault surface has the same direction and sense as the maximum shear stress resolved on that surface. However, this simplified hypothesis is questionable since fault mechanical interactions may induce slip reorientations. Earlier numerical geomechanical models confirmed that the slickenlines (slip vectors) are not necessarily parallel to the maximum resolved shear stress but are consistent with local stress perturbations. This leads us to ask as to what extent the Wallace and Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. Here, a geomechanical multi-parametric study using a 3D boundary element method, covering (i) fault geometries such as intersected faults or corrugated fault surfaces, (ii) the full range of Andersonian state of stress, (iii) fault friction, (iv) fault fluid pressure, (v) half space effect and (vi), rock properties, is performed in order to understand the effect of each parameter on the misfit angle between geomechanical slip vectors and the resolved shear stresses. It is shown that significant misfit angles can be found under specific configurations invalidating the Wallace and Bott assumptions, even though fault friction tends to minimize the misfit. We therefore conclude that in such cases, stress inversions based on fault slip data should be interpreted with care.
ISSN: 0040-1951

hal-01218418
https://hal.archives-ouvertes.fr/hal-01218418
DOI : 10.1016/j.tecto.2015.06.030

Résumé : In order to provide economic indicators for fisheries, analysis of contribution and economic dependencies of the Bay of Biscay fishing fleets to major commercial species catching in the ICES VIII area is conducted. 9 species are considered (regarding the importance of their landings in this area): Sole, Norway Lobster, Sea bass, Hake, Anglerfish, Anchovy, Sardine, Cuttlefish and Monkfish. The landings data are provided by the Harmonie database of the Fisheries Information System of Ifremer and the analysis per specie is done for the 2005 year on one side and over the period 2000-2005 on the other side. A stock slip is built for each species and presents : - Key figures on landings in the Bay of Biscay (total landings, average price, number of vessels concerned and share in the national landings) - Assessment of the concentration of landings - Assessment of the fleets' contribution to these total landings - Assessment of the fleets' economic dependence to the species based on the income share depending on this species.
Dans le cadre de l'élaboration des indicateurs économiques sur les pêcheries, une analyse de la contribution et de la dépendance des flottilles du Golfe de Gascogne aux espèces commerciales majeures capturées dans la zone CIEM VIII est présentée. Les 9 espèces principales retenues sont (par ordre décroissant d'importance dans les débarquements totaux en valeur dans la zone VIII en 2005) : la sole, la langoustine, le bar, le merlu, la baudroie, l'anchois , la sardine, la seiche et le calmar. L'analyse des débarquements par stock est menée à partir des données disponibles dans la base Harmonie du SIH de l'Ifremer à deux niveaux : en coupe instantanée (année 2005) a été choisie comme année de référence (sauf pour l'anchois - année de référence 2004 et en tendance de 2000 à 2005. Chaque fiche stock présente : - des chiffres clés sur la production de cette espèce dans le Golfe de Gascogne (débarquements totaux, prix moyen, nombre de navires impliqués, part dans les débarquements nationaux). - une analyse du niveau de concentration des débarquements - une analyse de la contribution par flottilles à ces débarquements par ordre décroissant des contributions au débarquement total en valeur de l'espèce - une analyse de la dépendance mesurée à partir de la contribution de l'espèce aux Chiffre d'affaires (ou débarquements totaux en valeur) de chaque flottille contributrice.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2007/rapport-4697.pdf
http://archimer.ifremer.fr/doc/00000/4697/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ryukyu subduction is known to generate very few earthquakes in its central segment contrarily to its two extremities. We focus in this study on the southernmost part of the Ryukyu subduction zone offshore east Taiwan. Our first task was to build a homogeneous earthquake catalogue for the period 1900–2007. The new catalogue provides homogenized M′W magnitudes and shows that several M′W≥ 7.0 earthquakes occurred offshore Hualien and Suao cities. We then focused on the 1920 June 5 earthquake (reported surface wave magnitude 8.1) previously located beneath the accretionary prism. The revised moment magnitude has been estimated in our catalogue at 7.7 ± 0.2. It is the biggest earthquake ever recorded in the Taiwan area but the fault that has produced this earthquake has not yet been identified with confidence. We relocated this event using regional phases (seismological bulletins archived at the Central Weather Bureau of Taiwan) about 50 km NNE and shallower of its former location, that is, within the Ryukyu Arc basement. According to earthquake bulletin information, revised magnitude, new hypocentral determination and known regional faults, we propose four potential active faults as candidates for the slip associated to this event: (1) the interplate seismogenic zone (ISZ), (2) an out-of-sequence thrust cutting through the forearc and branching on the ISZ, (3) a NS strike-slip fault cutting through the Ryukyu arc and (4) a N–S, westward dipping thrust fault, affecting the Philippine Sea Plate east of the Luzon Arc. The best compromise is to consider a rupture along the ISZ with a shallow nucleation possibly along a splay-fault followed by a downward and lateral propagation of the rupture that would explain the lack of significant seafloor motion and subsequent tsunami. We also estimate the maximum seismic coupling of the ISZ in the region east of Taiwan to about 0.4. In parallel, the evidences of aseismic slip occurring along the ISZ allow us to conclude that this region should only be affected by M < 8 earthquakes.
ISSN: 0956-540X

hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459/document
https://hal.archives-ouvertes.fr/hal-00545459/file/theunisseGJI2010.pdf
DOI : 10.1111/j.1365-246X.2010.04813.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the evolution of concepts on and methods of estimating the state of stress from fault movements. Theories of failure in isotropic materials suggested a simple geometrical construction of optimal principal stress directions from a fault plane and its associated slip. These optimal directions align shear stress and slip directions and maximize the difference between shear stress and frictional resistance on the fault plane. Optimal stress directions for calcite twinning are obtained by a similar construction, with the difference that they maximize shear stress. Force representation of seismic sources independently introduced pressure, P, and tension, T, axes at positions that also maximize shear stress on both nodal planes. Frictional slip theory and the constraint that slip and shear stress directions be parallel allowed to address reactivation of pre-existing faults. This suggested that stress could also be inverted from reactivated fault and slip data or earthquake focal mechanisms. Early methods relied on geometrical constructions as a substitute for calculations, whereas later methods relied on software as these calculations became tractable with the help of computers. Similar methods were developed for the inversion of stress from crystal twin gliding with non-optimal geometry, with a different criterion that relies on a threshold of the component of shear stress along the gliding line. Even though these methods seek a common stress tensor compatible with fault and slip data, their main use is to separate polyphase data into homogeneous subsets and help deciphering complex tectonic histories. Fault and slip data can also be analyzed to constrain the strain rather than the stress tensor. In most cases this involves a summation and yields an average strain for the considered rock volume. Stress inversion thus appears better suited for differentiating heterogeneous data whereas strain analysis appears better suited for homogenizing them.
ISSN: 0040-1951

hal-00759043
https://hal.archives-ouvertes.fr/hal-00759043
DOI : 10.1016/j.tecto.2012.02.009

Éditeur(s) : Elsevier Science Bv
Résumé : The rollback of a segmented slab of oceanic lithosphere is typically accompanied by vertical lithospheric tear fault(s) along the lateral slab edge(s) and by strike slip movement in the upper plate, defined as a STEP fault (Subduction Tear Edge Propagator). The Neogene evolution of the Central Mediterranean is dominated by the interaction between the slow Africa–Eurasia convergence and the SE-ward rollback of the Ionian slab, that leads to the back-arc opening of the Tyrrhenian Sea. Here, we present post-stack time migrated and pre-stack depth migrated Archimede (1997) multichannel seismic lines, that were acquired offshore eastern Sicily, at the foot of the Malta escarpment. First, we identify the recent deformation along the lateral ramp of the Calabrian accretionary wedge. Towards the east, the Calabrian wedge is formed by the accretion of the post-evaporitic sediments, above a decollement at the base of the Messinian evaporites. At the latitude of Syracuse, 50 km east of the Malta escarpment, a major N150°E trending crustal scale and vertical fault slices through the entire accretionary wedge. This fault cuts by several kilometers, through the pre-evaporitic Messinian sediments and into the basement. The vertical offset along this vertical fault decreases from north to south, and the fault is no longer observed on the seismic lines, 50 km SE of the Alfeo seamount. A previously published Moho depth isocontour map, offshore Sicily and the recent GPS data, combined with the presence of strike slip movements NE onshore Sicily, allow us to identify this 200 km long crustal-scale fault as the surface expression of a STEP fault. The presence of syntectonic Pleistocene sediments on top this crustal-scale fault suggests a recent lithospheric vertical movement of the STEP fault, in response to the rollback of the Ionian slab and to the SE-ward advance of the Calabria-Peloritan block
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-08 , Vol. 602 , P. 141-152

Droits : 2013 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00118/22878/21386.pdf
DOI:10.1016/j.tecto.2012.12.026
http://archimer.ifremer.fr/doc/00118/22878/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Located in central Europe at the junction of the Southern Alps and the Dinarides, the ≈ 100 km long Idrija fault, striking N310 and dipping ≈ 80°NE is often considered as the potential source of the historical 1511 earthquake (estimated macroseismic magnitude: Mm 6.8). Using 1/25,000 to 1/5000 topographical maps, satellite images (SPOT5), 12.5 m illuminated DEM and airborne LiDAR data-derived 1-m-DEM, we examined in detail the Idrija fault trace along a 20-km-long swath in the central portion of the fault. Combining topographic and remote sensing data allows characterizing the recent activity along the Idrija fault and estimating its cumulative displacement along strike.Between Tolmin and Godovič, the fault trace is mostly linear but appears divided into three disconnected segments of 11–20-km-long. Morphological evidences such as offset streams and ridges and major drainage abandonments suggest ongoing movement. At three sites, field observations and LiDAR-DEM analysis allow measuring cumulative dextral offsets comprised between 35 and 65 m. We found two larger offsets of ≈ 140 m and ≈ 360 m at the southeasternmost site. The vertical component is significant and revealed by a rake ranging from 0 to 33°. The derived N303–N310 striking slip-vector is in agreement with the motion along this fault as suggested by the geodesy. Assuming that the smallest measured offsets have been recorded after the last glacial maximum (LGM, about 20 ka ago), the minimum slip-rate for the Idrija fault is about 1.5 mm/yr over this period of time.
ISSN: 0040-1951

hal-01115724
https://hal.archives-ouvertes.fr/hal-01115724
DOI : 10.1016/j.tecto.2014.04.043

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995–1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N–S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the ‘r’ factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.
ISSN: 0956-540X

hal-01171752
https://hal.archives-ouvertes.fr/hal-01171752
DOI : 10.1093/gji/ggv052

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We recover the Holocene earthquake history of seven seismogenic normal faults in the Fucino system, central Italy. We collected 800 samples from the well-preserved limestone scarps of the faults and modeled their 36Cl concentrations to derive their seismic exhumation history. We found that > 30 large earthquakes broke the faults in synchrony over the last 12 ka. The seven faults released strain at the same periods of time, 12-9 ka, 5-3 ka, and 1.5-1 ka. On all faults, the strain accumulation and release occurred in 3-6 ka supercycles, each included a 3-5 ka phase of slow (≤ 0.5-2 mm/yr) strain accumulation in relative quiescence, followed by a cluster of three to four large earthquakes or earthquake sequences that released most of the strain in < 1-2 ka. The large earthquakes repeated every 0.5 ± 0.3 ka during the paroxysmal phases and every 4.3 ± 0.9 ka between those phases. Earthquakes on the northern faults produced twice larger surface slips (~ 2 m) and had larger magnitudes (Mw 6.2-6.7) than those on the southern faults. On most faults, the relative strain level was found to control the amount of slip and the time of occurrence of the next large earthquake. Faults entered a phase of clustered activity once they had reached a specific relative strain threshold. The Tre Monti fault is identified as the most prone to break over the next century. Our data document earthquake synchrony and clustering at a broader space and time scale than has been reported to date.
ISSN: 0148-0227

hal-00903460
https://hal.archives-ouvertes.fr/hal-00903460
DOI : 10.1002/jgrb.50299

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the deformation mechanisms and the seismic properties of 10 eclogite samples from different localities (Alps, Norway, Mali and eastern China) through the analysis of their microstructures and lattice-preferred orientations (LPO). These samples are representative of various types and intensity of deformation under eclogitic metamorphic conditions. Omphacite and garnet LPO were determined from electron backscatter diffraction (EBSD) technique. Garnet appears to be almost randomly oriented whereas omphacite develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the (010)-poles concentrated sub-perpendicular to the foliation. In order to analyze the deformation mechanisms that produced such omphacite LPO, we compare our observations to LPO simulated by viscoplastic self-consistent numerical models. A good fit to the measured LPO is obtained for models in which the dominant slip systems are 1/2h110i{11 ¯ 0}, [001] {110} and [001] (100). Dominant activation of these slip systems is in agreement with TEM studies of naturally deformed omphacite. Seismic properties of eclogite are calculated by combining the measured LPO and the single crystal elastic constants of omphacite and garnet. Although eclogite seismic anisotropies are very weak (less than 3% for both P-and S-wave), they are generally characterized by a maximum P-wave velocity sub-parallel to the lineation and by a minimum velocity approximately normal to foliation. The mean P-and S-wave velocities are high (respectively, 8.6 and 4.9 km/s). The S-wave anisotropy pattern displays complex relationships with the structural frame but the fast polarization plane generally tends to be parallel to the foliation. Calculated reflection coefficients show that an eclogite/crust interface is generally a good reflector (Rc > 0.1), whereas an eclogite body embedded in the upper mantle would be hardly detectable.
ISSN: 0040-1951

hal-01389715
http://hal.univ-reunion.fr/hal-01389715
http://hal.univ-reunion.fr/hal-01389715/document
http://hal.univ-reunion.fr/hal-01389715/file/Bascou_eclo-sismo_tphy2001_hal.pdf
DOI : 10.1016/S0040-1951(01)00156-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Le conflit social aux Antilles en 2009 a été très médiatisé en métropole où il est apparu exceptionnel, première épreuve dans le champ social susceptible de faire vaciller l’autorité d’un gouvernement jusqu’alors inflexible dans ce domaine. Au regard de l’historien, le conflit social antillais n’a rien de bien neuf. Il se glisse dans une histoire du mouvement social antillais qui reste encore un champ bien peu traité par l’histoire la plus contemporaine. Un rapide retour en arrière sur deux conflits sociaux majeurs, en 1959 et 1961, permet de resituer l’impact des pulsions sociales sur les politiques françaises pour l’outre-mer. Le regard de l’historien ici porté vient nuancer le caractère « exceptionnel » du moment 2009 et rappelle que les sorties de crise trouvées en 2009 rappellent étrangement celles retenues un demi-siècle plus tôt !
Social conflict in the West Indies in 2009 was highly publicized in France where it seemed exceptional, as a first event in the social field likely to shake the authority of a government previously inflexible in this area. In view of the historian, social conflict Caribbean has nothing new. He slips into a West Indian social history of the movement which is still a field little studied by the more contemporary history. A quick look back at two major social conflicts in 1959 and 1961 can relocate the impact of the social instincts of the French policy for overseas. The eye of the historian here has brought nuance to the "exceptional" at the time and recalls that out of the crisis in 2009 found strangely reminiscent of those used half a century ago!
Martinique

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.4881
http://journals.openedition.org/etudescaribeennes/4881

Éditeur(s) : HAL CCSD
Résumé : This work addresses a study of geodynamics in Armenia, a country located in the central part of the zone of continental collision between the Arabian and Eurasian lithosphere plates. The work includes two main parts: study of recent deformations of the lithosphere by means of GPS and detailed paleoseismological and morphometric investigations in the zone of the Artanish-Tskhouk segment of the PSSF. We analyze and compare rates of deformation determined by the GPS data and the rates estimated by the paleoseismological and morphometric studies. The Armenian-French network of GPS observations was installed in Armenia in 1998. Three observation sessions were conducted in 1998, 2000 and 2003. Based on the evidence obtained, a detailed study of the velocity field was conducted to analyze lithosphere deformation in Central and Northern Armenia. Slip rates were estimated for the principal active faults in Armenia. Several field works, including paleoseismological, archaeo-seismological, archaeological, geodetic and morphological studies, had been implemented in the zone of the Artanish-Tskhouk segment of the PSSF in 2003-2005. The fault was mapped in detail; rates of main horizontal and vertical slip along the fault were estimated and re-estimated. Four (4) paleo- and archeo-earthquakes were studied and dated. Eventually, the obtained data allowed us to re-estimate slip rates, maximum possible magnitudes and recurrence intervals of strong earthquakes on the Artanish-Tskhouk segment of the PSSF. A technique enabling estimation of horizontal and vertical displacements along strike-slip faults during paleo-earthquakes by the evidence obtained from paleo-seismological trenching was developed.
Les travaux présentés dans ce mémoire sont consacrés à l'étude de la géodynamique du territoire de l'Arménie qui est situé dans la partie centrale de la zone de collision continentale entre les plaques Arabique et Eurasienne. Le mémoire comprend deux parties principales: 1/ l'étude des déformations actuelles par la géodésie GPS; 2/ l'étude paléosismologique et morphométrique détaillée de la zone du segment d'Artanish-Tskhuk de la faille de Pambak-Sevan-Syunik (PSSF). On présente l'analyse et la comparaison des vitesses de déformations estimées par les données de GPS et par les données paléosismologiques et morphométriques. Le réseau d'observations GPS Arméno - Français a été installé en Arménie en septembre 1998. Trois campagnes de mesure du réseau ont été réalisées en 1998, 2000 et 2003. L'analyse détaillée du champ de vitesse à partir des données GPS a permis d'étudier et de quantifier les déformations actuelles de l'Arménie centrale et septentrionale. On a pu estimer les vitesses des déplacements des failles actives principales du territoire de l'Arménie. Un ensemble de travaux sur le terrain comprenant des recherches paléosismologiques, archéosismologiques, archéologiques, géodésiques, et morphologiques a été réalisé entre 2003 et 2005 dans la zone du segment d'Artanish-Tskhuk de la faille de PSSF. La cartographie détaillée de la faille a été réalisée et l'on a estimé et/ou re-estimés les déplacements horizontaux et verticaux le long de la faille. Quatre paléo- et archéoséismes ont été étudiés et datés. À partir des données obtenues, pour le segment d'Artanish-Tskhuk de la faille de PSSF, on a réévalué les vitesses de déplacements, la magnitude maximale possible, et l'intervalle récurrence des séismes forts. Une méthode d'évaluation des déplacements horizontaux et verticaux a été proposée à partir des logs de tranchées sur les failles de décrochements associées à des paléoséismes.
https://tel.archives-ouvertes.fr/tel-00551535

Droits : info:eu-repo/semantics/OpenAccess
tel-00551535
https://tel.archives-ouvertes.fr/tel-00551535
https://tel.archives-ouvertes.fr/tel-00551535/document
https://tel.archives-ouvertes.fr/tel-00551535/file/thesedavtyan2.pdf