Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy of the south Iberian upper mantle is investigated using shear-wave splitting of SKS phases. We analyzed teleseismic events recorded by sixteen permanent broadband stations installed on the southern Iberian Peninsula and in northern Africa, and we determined fast polarization directions phi, and delay times delta t between fast and slow components. The area of investigation extends across two important geological structures in the Variscan Iberian Peninsula: the Variscan Iberian Massif in its center, and the Gibraltar arc in the Southeast, that represents the most westerly Alpine belt in the western Mediterranean. Shear-wave splitting measurements from stations in the Betic domain show homogeneous ENE-WSW fast directions nearly parallel to the trend of the mountain belt, and smooth spatial variations. Stations in the North, toward the southern part of the Variscan Iberian Massif show homogeneous fast directions however trending NS to NE-SW, different from those recorded in the Betic. These observations may reflect a post-Hercynian (Variscan) deformation of the Ossa-Morena zone, related to the main stages in the tectonic evolution of this part, namely transpressional stage, transtensional stage and shortening episode, or a deformation related to the posterior Alpine orogeny. Along the Gibraltar arc, we observe a smoothly varying phi trend changing from ENE-WSW in the Eastern Betics to NS in the area of Gibraltar and Ceuta, following more or less the general trend of the mountain belt around the Alboran Sea, and the coastline. Since a similar rotation is also visible in results from Pn anisotropy, this suggests that the anisotropy is vertically coherent starting from just below the Moho. Comparing the anisotropy pattern expected from various geodynamic models with the observed SKS splitting suggests that the anisotropy is best explained by a model of slab rollback, rather than by delamination models.
ISSN: 0012-821X

hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175/document
https://hal.archives-ouvertes.fr/hal-00412175/file/Buontempo_SKS_gibraltar_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.06.024

Éditeur(s) : HAL CCSD
Résumé : International audience
o abstract
Coastal Engineering Proceedings

hal-01426585
https://hal.archives-ouvertes.fr/hal-01426585

Éditeur(s) : HAL CCSD
Résumé : Report
The Canadian coastline is the longest of any country in the world, and is at risk from tsunamis generated in three oceans. The current state of knowledge precludes a complete probabilistic tsunami hazard assessment, which would require quantification of a wide range of possible scenarios for each tsunami source, coupled with modelling that incorporates fine-resolution bathymetry and onland topography to adequately assess potential runup at the coast. This preliminary assessment presents a first attempt to quantify the tsunami hazard on the Canadian Pacific, Atlantic and Arctic coastlines from local and far-field, earthquake and large landslide sources. For each source considered, we calculate the probability that tsunami runup at the coast will exceed 1.5 m (threshold for potential damage) and 3 m (significant damage potential), in a 50-year period. For each coastal region, we then combine the relative hazard from each source to calculate the overall probability that the coastline in question will experience tsunami runup exceeding 1.5 m (and 3 m) within a 50-year period, from any geological source. We also consider the maximum runup levels expected to occur within time periods of 100, 500, 1000, and 2500 years.
https://hal.archives-ouvertes.fr/hal-00856677

hal-00856677
https://hal.archives-ouvertes.fr/hal-00856677
DOI : 10.4095/292067

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : Des techniques d'optimisation de formes sont utilisées dans des problèmes du Génie Côtier pour la protection des plages. En collaboration avec le bureau d'étude Bas-Rhône Languedoc ingénierie, un projet d'aménagement concret de la plage du Lido de Sète, utilisant des ouvrages immergés en géotextile, a été étudié. Des solutions optimales, visant à réduire la mise en suspension des sédiments, pour les structures de défenses ont été obtenues à partir d'un modèle hydrodynamique de propagation de houle. Une étude complémentaire à partir d'un modèle de circulation et des travaux expérimentaux en canal à houle permettent ensuite de valider les résultats optimaux numériques obtenus. Shape optimization techniques, focusing on coastal structures design, are used to solve coastal engineering problem. In collaboration with the Bas-Rhône Languedoc engineering Company, a actual development plan concerning the beach of the Lido of Sète has been studied. Optimal solutions, aimed at reducing sediments suspended, for defense structures have been obtained with a hydrodynamic water wave model. An additional study using a circulation model and experimental works in flume tend to validate optimal numerical results.
ISSN: 1760-8716

hal-00854031
https://hal.archives-ouvertes.fr/hal-00854031
DOI : 10.5150/jngcgc.2008.025-I

Éditeur(s) : Amer Geophysical Union
Résumé : The objective of the paper is to analyze the degree of realism of the Parallel Ocean Program ( POP) model of the Los Alamos Laboratory using the combined TOPEX/Poseidon and ERS-1/2 (TPERS) sea level anomaly (SLA) data sets and to present a detailed study of mesoscale characteristics in the North Atlantic. This description spans 8 years of data from 1993 to 2000. At first, we focus on the analysis of the mean eddy kinetic energy ( EKE) and show that the major characteristics of mesoscale variability are realistically simulated despite an overestimation of the EKE model in the Gulf Stream region. We then describe the SLA space and timescales and propagation velocities at a resolution never achieved before. There is a high level of agreement between the model and altimeter values regarding spatial scales and propagation velocities. POP timescales are, however, significantly longer in the subtropical regions. The westward zonal propagation velocity of both the model and the observations are higher than the speed computed from standard Rossby wave theory. The effect of mean current advection on POP and TPERS propagation velocities is also clearly seen in the Labrador Current and in the Gulf Stream and its recirculations. Finally, a study of the seasonal and interannual variability of the high-frequency (HF) EKE is carried out. The model reproduces accurately most of the HF-EKE seasonal variations in the Caribbean Sea and at high latitudes despite a phase advance. A clear HF-EKE interannual variability is then evidenced. Our hypothesis is that a contraction of the subpolar and subtropical gyres due to the North Atlantic Oscillation (NAO) could explain a reduction of the eddy activity in the North Atlantic Current, in the Newfoundland basin, and in the Azores Current. In the Caribbean Sea, the interannual variability of the EKE for both POP and TPERS seems to be caused by an interannual variability of the wind stress.
Journal Of Geophysical Research-oceans (0148-0227) (Amer Geophysical Union), 2004-12 , Vol. 109 , N. C1205 , P. 16 PP.

Droits : 2004 AGU
http://archimer.ifremer.fr/doc/00087/19841/17491.pdf
DOI:10.1029/2004JC002360
http://archimer.ifremer.fr/doc/00087/19841/

Éditeur(s) : Springer
Résumé : Large benthic foraminifers are considered to be good indicators of shallow marine carbonate environments in fossil series. Over the last 50 years, the palaeoenvironment of Tertiary Nummulites accumulations has been a matter of debate, particularly because of difficulties in interpreting these deposits, and in this way, the absence of analogues in present-day seas does not help. The aim of this paper is to insight the different ways Nummulites tests and clasts may accumulate according to their hydrodynamic behaviour. Based on experimental measurements and on SEM observations, it appears that the high primary skeletal porosity of Nummulites made them easily transportable. The calculated threshold shear velocities confirm that large-sized Nummulites can be moved by weak wave-driven currents. This peculiar hydrodynamic behaviour of Nummulites could explain the diversity of depositional models. Depending on local hydrodynamic conditions, autochthonous Nummulites deposits can be preserved as in situ winnowed bioaccumulations or be accumulated offshore, onshore or alongshore, away from the original biotope.
Facies (0172-9179) (Springer), 2006-05 , Vol. 52 , N. 2 , P. 221-235

Droits : Springer-Verlag 2005
http://archimer.ifremer.fr/doc/00085/19597/17234.pdf
DOI:10.1007/s10347-005-0035-z
http://archimer.ifremer.fr/doc/00085/19597/

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Late Jurassic coral reefs are present in the Western High Atlas of Morocco along the eastern paleomargin of the young Atlantic Ocean. The Izwarn section shows two reef units made of scleractinian corals and microbialites, included in a progradational shallowing-upward succession. Changes in reefal composition and structure observed in a ca. 50 cm-thick interval at the base of the reef unit 1 are interpreted to represent the first well-documented ecological succession in Late Jurassic reefs. Bioclastic deposits, sparse and poorly diversified corals (five genera) preserved in life position, and finally a more diversified coral assemblage (11 genera) building a reef framework with stromatolitic crusts reflect pioneer, colonization and diversification stages, respectively. A specific depth window, where light was reduced but sufficient for a catch-up growth mode and below the erosive action of waves, probably at the lower slope of a fore-reef area, has made possible the development and the record of this ecological succession. With a more diversified coral assemblage (16 genera), the reef unit 2 reflects shallower and well-agitated waters of a fore-reef area. Overlaying this second reef unit, the upper part of the section reveals back-reef deposits made of reworked reef elements, whereas a putative reef crest area is not recorded.
ISSN: 0016-6995

hal-00795549
https://hal.archives-ouvertes.fr/hal-00795549
DOI : 10.1016/j.geobios.2012.05.002

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD Coastal Education and Research Foundation
Résumé : The sinking of the Prestige tanker (November, 2002) spilled over 64000 tons of heavy fuel oil. The Prestige oil spill (POS) affected approximately 1000 km of coast belonging to Portugal, France and Spain and more than 600 sandy beaches were polluted along the Atlantic coast of Spain. Since POS, yearly surveys of two oiled sandy beaches (Galicia, NW Spain) have provided evidences regarding the oil pollution behavior and the influence of beach morphodynamics on the dynamics of the contamination. The analysis of wave climate, the extracted suction cores and the detected oil from 2004 and 2009 fieldworks have allowed to promote a conceptual model of the influence of beach morphodynamics on the first steps of an oil spill and to establish the effects on the long-term oil pollution
ISSN: 0749-0208

hal-00783182
https://hal.archives-ouvertes.fr/hal-00783182

Éditeur(s) : HAL CCSD
Résumé : This paper presents the experimental results obtained for an automatic detection of ships in High Resolution optical satellite images. Our images are panchromatic SPOT 5 images, whose resolution is 5m per pixel. Our detection method is part of an industrial project of maritime surveillance. It is based on the Bayesian decision theory and does not need any preprocessing.The detection is composed of three stages. The first one is a pre-detection of targets that gives us candidates. The second one is a precise segmentation of each candidate. The third one is a classification of candidates into three classes : real small targets, real big targets and false alarms. The two first stages are based on the bayesian theory, using a very simple image model that leads to very fast algorithms. For now, the classification is based on multivariate decision tree. Finally, the overall results of the method are given for a set of images, as close as possible to the operational conditions and show the performances of the proposed method (detection of almost all the ships, false alarms due to crests of waves and an acceptable computing time).
Journée Nationale de Photogrammétrie et Télédétection

hal-00601854
https://hal.archives-ouvertes.fr/hal-00601854

Éditeur(s) : Séminaire CLAROM, 14èmes journées de l'Hydrodynamique, Val de Reuil, 18-20 novembre 2014
Résumé : From measurements obtained at high level frequency over a long period of time, we aim to determine the different characteristics of the flow situated in the IFREMER (French Research Institute for Exploration of the Sea) wave and current flume tank in Boulogne-Sur-Mer. This 2 data measured with a LDV (Laser Doppler Velocimetry) allows to get the characteristics of turbulence and the incident velocity fluctuations. The well-controlled conditions in the flume and the high sampling frequency of LDV system will give us a good estimate of the different flow characteristics such as dissipation, the Reynolds number, the injection scales, Taylor and Kolmogorov. The objective is to place the marine current turbine in this flow and then to study the influence of turbulence on the rotor of this turbine. The flow velocity is imposed and two different rates of turbulence are analysed.
A partir de données à haute fréquence acquises pendant une longue période de temps, on cherche à déterminer les différentes caractéristiques de l’écoulement généré au bassin d’essais à houle et courant d’IFREMER à Boulogne-Sur-Mer. Ces données mesurées avec un système LDV permettent de caractériser la turbulence et les fluctuations de la vitesse du courant incident. Les conditions contrôlées du bassin et les longues périodes d’acquisition du système LDV nous donneront une bonne estimation des différentes caractéristiques de l’écoulement tels que la dissipation, le nombre de Reynolds, les échelles d’injection, de Taylor et de Kolmogorov. Dans un deuxième temps nous étudions les effets de la turbulence de l’écoulement sur le comportement d’une hydrolienne tri-pale à axe horizontal.L’objectif est de placer la maquette d’hydrolienne dans cet écoulement et étudier l’influence de la turbulence sur le rotor de cette turbine. La vitesse de l’écoulement est imposée et deux taux de turbulence différents ont été étudiés.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00247/35814/34329.pdf
http://archimer.ifremer.fr/doc/00247/35814/

Éditeur(s) : HAL CCSD
Résumé : International audience
Although earthquakes and tsunamis are less frequent in the Dover Straitthan over active subduction zones, a plausible potential exists for intraplate earthquakes of magnitude Mw=6.9 generating a tsunami with damaging consequences. In April 1580, an earthquake shook the region violently and destructions were reported as far as London in the north andRouen in the south. Despite fair weather conditions, a series of abnormal sea waves was reported in several harbours (Calais, Boulogne and Dover) on the same day. A first step was to produce a range of numerical coseismic tsunami simulations and to compare them with historical witness accounts. Results raise the question of whether such earthquakes could also triggerchalk flow-generated tsunamis along cliff lines on both sides of the Strait. Gravity-driven collapses affect thechalk cliffs periodically, but local tsunami waves caused by very large mass movements could reach heights of several meters and, for example, strike Dover.
Proceedings of the 15th World Conference on Earthquake Engineering
Lisbonne, Portugal

halshs-01291496
https://halshs.archives-ouvertes.fr/halshs-01291496

Éditeur(s) : Gauthier-Villars
Résumé : The wind, temperature and current data collected during the joined French-USA FOCAL/SEQUAL programme carried in the equatorial Atlantic band in 1983 and 1984, allowed for the first time a simultaneous study of both the equatorial and coastal (5-degrees-N) upwellings along 4-degrees-W. At the equator, the decreases of both the surface temperature and the depth of the thermocline in boreal summer are correlated with the zonal component of the local windstress in the period band 1-2 months. This corresponds to the time required by the thermocline to lift up at 0-4-degrees-W in the presence of an easterly wind. The local wind cannot however explain the entire vertical variability of the thermal structure at 0-4-degrees-W. The correlation function shows in addition that the temperature there is highly correlated to the wind recorded at St Peter and St Paul Rocks (SPP) in the period band 0-2 months. This time scale is the one required by the Kelvin and Rossby waves to propagate along the equator through equatorial wave guide dynamics. The influence of these waves seems particularly important when considering the upward displacements of the thermocline both in February-March when the winds abruptly relax and in November-December when the wind at 0-4-degrees-W is southwesterly with no secondary negative maximum in the wind record at 1-degrees-N-29-degrees-W (SPP), contrary to the climatological wind field. The computation of the different terms of the heat equation applied to an homogeneous surface layer shows that the cooling is entirely due to vertical advection and eddy diffusion. The cooling would be more effective without the atmospheric heat flux and the horizontal advection of heat transported both by the South Equatorial Current at the surface and the southward current at the bottom of the mixed layer. At the coast, the amplitude and duration of the upwellings are not constant all along the coast: in boreal summer, they are maximum east of the two capes (Palmas and Three Pointes) while in winter the strength of the cooling is maximum in the east of Cape Palmas and then decreases eastward. The meridional slope of the thermocline off the coast concerns a distance which is much larger than the internal Rossby radius of deformation and is coherent with the latitudinal extension and intensity of the Guinea current both in summer and winter. In addition to this geostrophic adjustment, the upward tilt of the thermocline in summer is enhanced by the intensification of the component of the wind parallel to the coast. The application of a simple linear model forced with an eastward wind at that time explains the surface maximum cooling at the coast and the current distribution in both vertical and meridional directions. The two maxima of the zonal component of the Guinea current, in summer (main one) and in winter are in phase with the intensity of the vertical component of the windcurl. The application of the Sverdrup equations shows that the current speeds computed, for both seasons, are of the same order of magnitude as the speeds observed.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 3 , P. 223-240

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21252/18865.pdf
http://archimer.ifremer.fr/doc/00101/21252/

Éditeur(s) : HAL CCSD
Résumé : International audience
A mode stirred reverberation chamber (RC) is designed to conduct in vivo studies in the 60-GHz band. This exposure system has suitable features for experiments on animals. An interface, for temperature measurements using an infrared (IR) camera, is designed in the chamber wall in order to measure the specific absorption rate and/or the power density inside the chamber.
BIOEM 2016
Gand, Belgium

hal-01377564
https://hal.archives-ouvertes.fr/hal-01377564
https://hal.archives-ouvertes.fr/hal-01377564/document
https://hal.archives-ouvertes.fr/hal-01377564/file/bioem%202016_2_final.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Due to shallow penetration of millimeter waves (MMW) and convection in liquid medium surrounding cells, the problem of accurate assessment of local MMW heating in in vitro experiments remains unsolved. Conventional dosimetric MMW techniques, such as infrared imaging or fiber optic (FO) sensors, face several inherent limits. Here we propose a methodology for accurate local temperature measurement and subsequent specific absorption rate (SAR) retrieval using microscale thermocouples (TC). SAR was retrieved by fitting the measured initial temperature rise to the numerical solution of an equivalent thermal model. It was found that the accuracy of temperature measurement depends on thermosensor size, that is, the smaller TC, the more accurate the temperature measurement. SAR determined using TC with lead diameters of 25 and 75m demonstrated 98.5% and 80.4% match with computed SAR, respectively. However, both TC provided the same temperature rises in long run (>10min). FO probe failed to measure adequately local heating both for short and long exposures due to the relatively large size of the probe sensor (400m) and time constant (0.6s). Calculated SAR in the cell monolayer was almost two times lower than that in the surrounding liquid. It was shown that the impact of the cell monolayer on heating due to its small thickness (5 to 10m) can be considered as negligible. Moreover, we demonstrated the possibility of accurate measurement of MMW-induced thermal pulses (up to 10 degrees C) using 25m TC. Bioelectromagnetics. 38:11-21, 2017. (c) 2016 Wiley Periodicals, Inc.
ISSN: 0197-8462

hal-01436768
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01436768
DOI : 10.1002/bem.21999
PUBMED : 27571392

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy originating within the continental crust is used to determine kinematic flow lines within active mountain belts and is widely attributed to regionally aligned mica. However, naturally deformed micaceous rocks commonly show composite (e.g. S-C) fabrics. It is necessary therefore to understand how both varying mica content and differing intensities of multiple foliations impact on seismic interpretations in terms of deformation fields. An outcrop analogue for granitic mid-crustal deformed zones is used here to calibrate the seismic response against both parameters. Seismic responses are modelled using crystallographic preferred orientations for polymineralic, micaceous granitic gneisses, measured using Electron Back-Scatter Diffraction. The sample results are generalised by modelling the effects of variations in modal composition and the relative importance of deformation fabrics of variable orientation, so-called rock and fabric recipes. The maximum P- and S-anisotropy are calculated at 16.6% and 23.9% for single-foliation gneisses but for mixed (i.e. S-C) foliation gneisses these values reduce to 5.8% and 7.5% respectively. Furthermore, mixtures of multiple foliations generate significant variations in the geometry of the seismic anisotropy. This effect, coupled with the geographical orientation of fabrics in nature. can generate substantial variations in the orientation and magnitude of seismic anisotropy (especially for shear waves) as measured for the continental crust using existing receiver function and teleseismic near-vertical incidence methods. Thus, maps of seismic anisotropy varying with depth in deforming continents need not imply necessarily depth-varying deformation kinematics and tectonic decoupling.
ISSN: 0012-821X

hal-00445247
https://hal.archives-ouvertes.fr/hal-00445247
DOI : 10.1016/j.epsl.2009.09.035

Éditeur(s) : Elsevier
Résumé : The French Guiana transform margin and Demerara abyssal plain have been recently surveyed in the framework of the EXTRAPLAC French Program of extension of the continental shelf (Guyaplac survey, Ifremer-IFP-SHOM-IPEV). Based on the interpretation of some of the data collected during the Guyaplac survey (Simrad-EM12 multibeam bathymetric data, backscatter imagery, and 3.5 kHz profiles), the area can be divided into three morphostructural domains. (1) The western Guiana margin, including a part of the Demerara plateau, an important bathymetric relief prolonging the continental platform off Guiana and Surinam. This domain is bounded by (1a) the NWSE trending northern border of the Demerara plateau which appears quite steep and corresponds to a transform segment of the margin, (1b) the N-S eastern border of the Demerara plateau which corresponds to a divergent segment of the margin. The Demerara plateau shows a segmented morphology, low slope gradients, and a very rough surface (ripples perpendicular to the slope direction). NNW-SSE structural steps seem to correspond to collapses of 100 km long blocs towards the east. Slumps initiate along these directions. The observed rough bathymetry seems to be related to creeping processes. At a greater scale (seismic data), this part of the margin has been totally destabilized (numerous imbricate transparent masses rooted at about 0.5 s.t.w.t.t. below seafloor). The NW-SE trending northern border of the Demerara plateau corresponds to a cliff-like continental slope, probably slightly smoother than other transform margins (Ghana/cote d'Ivoire margin). The N-S eastern border of Demerara plateau is characterized by numerous small-scale imbricate slumps. Some of these failures seem to be emplaced in the prolongation of the NNW-SSE structural steps identified on the Demerara plateau. (2) The eastern Guiana margin corresponds to a NW-SE oriented gullied transform margin segment. The associated continental slope is very steep and characterized by numerous imbricate slumps and related debris flows. Some undulated masses, probably corresponding to creeping sediments or to older mass-wasting events are still imprinted on bathymetry. This transform margin segment is nearly entirely destabilized and eroded. (3) The Demerara abyssal plain. This domain is characterized eastwards by channels belonging to the Amazon turbidite system and westwards, at the foot of Demerara continental slope, by sediment waves probably created by contour currents. To conclude, it seems that there is a strong relationship between the structure (transform and divergent segments) and the emplacement of recurrent slope instabilities. These are probably related to the steepness of the slopes but also to subsidence histories generating in some cases huge deep-seated collapses of the whole margin. Fluid ascents are common everywhere in the area, probably enhancing slope instability. Their origin is not constrained but the black shales or Cretaceous organic-rich layers could be good candidates.
Marine and Petroleum Geology (0264-8172) (Elsevier), 2009-05 , Vol. 26 , N. 5 , P. 711-723

Droits : 2008 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6856.pdf
DOI:10.1016/j.marpetgeo.2008.02.010
http://archimer.ifremer.fr/doc/00000/6856/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In order to constrain the vertical and lateral extent of deformation and the interactions between lithosphere and asthenosphere in a context of a transpressional plate boundary, we performed teleseismic shear wave splitting measurements for 65 permanent and temporary broadband stations in central California. We present evidence for the presence of two anisotropic domains: (1) one with clear E–W trending fast directions and delay times in the range 1.5 to 2.0 s and (2) the other closely associated with the San Andreas Fault system with large azimuthal variations of the splitting parameters that can be modeled by two anisotropic layers. The upper of the two layers provides fast directions close to the strike of the main Californian faults and averaged delay times of 0.7 s; the lower layers show E–W directions and delay times in the range 1.5 to 2.5 s and thus can be compared to what is observed in stations that require a single layer. We propose the E–W trending anisotropic layer to be a 150 to 200 km thick asthenospheric layer explained by the shearing associated with the absolute plate motion of the North American lithosphere. The shallower anisotropic layer ought to be related to the dynamics of the San Andreas Fault system and thus characterized by a vertical foliation with lineation parallel to the strike of the faults localized in the lithosphere. We also propose that the anisotropic layer associated with each fault of the San Andreas Fault system is about 40 km wide at the base of the lithosphere.
ISSN: 0148-0227

hal-01236161
http://hal.univ-reunion.fr/hal-01236161
http://hal.univ-reunion.fr/hal-01236161/document
http://hal.univ-reunion.fr/hal-01236161/file/Bonnin_SKS_California_JGR2010.pdf
DOI : 10.1029/2009JB006438

Éditeur(s) : HAL CCSD
Résumé : This study provides additional constraints on the relations between deformation, hydration and percolation of fluids and melts in the subcontinental lithospheric mantle beneath a craton and a rift, as well as their implication on its geodynamical behaviour. I have analysed the microstructures, the CPOs, and the hydrogen content of mantle xenoliths from the Kaapvaal craton, and two sets of xenoliths from different localities along the East African Rift (North Tanzanian Divergence and SE Ethiopia).The coarse-granular microstructures and the well-defined CPOs in Kaapvaal peridotites suggest a deformation followed by a long quiescence time. Orthorhombic olivine CPOs predominates, but axial-[100] and axial-[010] are also measured. Cratonic peridotites record multiple metasomatic episodes, leading to a significant compositional heterogeneity, which cannot be imaged by seismic studies. Olivine hydrogen contents are variable, but tend to increase until 150 km depth, reaching up to 50 ppm wt. H2O. The deeper samples are almost dry. Piston-cylinder experiments on hydrogen diffusion between a volatile-rich kimberlitic melt and forsterite suggest that the presence of CO2 in the system could significantly decrease water fugacity and thus forsterite hydration. These experimental results indicate that the hydrogen contents measured in olivine were acquired during a metasomatic event rather than during xenolith extraction by kimberlites. However, this metasomatism was not followed by remobilization of the cratonic root.In the North Tanzanian Divergence, localities within the rift axis and the volcanic transverse belt (Lashaine and Olmani) show significant differences in microstructures and olivine CPO patterns. In Lashaine, coarse-granular microstructures and orthorhombic to axial-[100] CPO patterns in olivine can be explained by transpressional deformation during the formation of the Mozambique belt, or by the occurrence of a remnant of a cratonic domain embedded within the Mozambique belt. Within the rift axis, porphyroclastic to mylonitic microstructures suggest a recent rift-related deformation accompanied by syn-kinematic melt-rock reactions, and followed by variable annealing. The strong heterogeneity in microstructures and olivine CPO suggests that this deformation was acquired during multiple tectonic events probably linked to episodic magma percolation, separated by quiescence episodes. The axial-[100] patterns in olivine and the oblique fast directions reported by SKS studies are coherent with transtensional deformation within the lithospheric mantle beneath the rift.The peridotites from SE Ethiopia are less recrystallized than the rift-axis Tanzanian peridotites, displaying coarse-porphyroclastic microstructures. Microstructures and orthorhombic CPOs in olivine suggest syn- to post-metasomatic deformation. S-waves polarization anisotropies calculated for these samples cannot explain alone the delay times reported by SKS studies in this part of the East-African Rift.
Les travaux réalisés durant cette thèse apportent de nouvelles contraintes sur les relations entre déformation, hydratation et percolation de fluides et/ou de magmas dans le manteau subcontinental sous un craton et sous un rift, et leurs implications sur son comportement rhéologique. Il repose sur l'analyse des microstructures, des OPRs et des teneurs en hydrogène de xénolites mantelliques du craton du Kaapvaal, et sur deux séries de xénolites provenant de différentes localités le long du rift Est-Africain (Divergence Nord Tanzanienne et SE de l'Ethiopie). Les microstructures granulaires à gros grains et les OPRs bien définies des péridotites du craton du Kaapvaal sont cohérentes avec un épisode de déformation suivi d'une longue période de quiescence. Les OPRs de l'olivine sont majoritairement à symétrie orthorhombique, mais des symétries axiale-[100] et axiale-[010] sont aussi mesurées. Les péridotites cratoniques enregistrent de multiples épisodes métasomatiques, ayant entraîné une hétérogénéité de compositions à petite échelle ne pouvant être détectée par les études sismiques. Les teneurs en hydrogène mesurées dans l'olivine sont variables, mais ont tendance à augmenter jusqu'à 150 km de profondeur, atteignant alors jusqu'à 50 ppm wt. H2O. En dessous de cette profondeur, les échantillons montrent des teneurs en hydrogène très faibles. Les expériences réalisées en piston-cylindre sur la diffusion de l'hydrogène issue d'un liquide kimberlitique vers de la forstérite suggèrent que la fugacité en eau pourrait fortement être diminuée par la présence de CO2, empêchant l'hydratation de l'olivine durant extraction des xénolites par les kimberlites. Ces résultats expérimentaux suggèrent que les teneurs en hydrogène dans l'olivine des péridotites du craton du Kaapvaal ont été acquises durant un épisode métasomatique en profondeur et non pendant leur extraction par les kimberlites. Ces teneurs n'ont toutefois pas à ce jour entraîné de remobilisation de la racine cratonique. Enfin, le calcul des propriétés sismiques des péridotites cratoniques révèle que les anisotropies générées par les OPRs de ces échantillons sont suffisantes pour expliquer les anisotropies mesurées par les ondes SKS et les ondes de surface.Les xénolites de la Divergence Nord-Tanzanienne, montrent des variations significatives de microstructures et d'OPR de l'olivine entre les péridotites des localités dans l'axe du rift et celles de la chaîne volcanique transverse (Lashaine et Olmani). A Lashaine, les microstructures granulaires à gros grains et les OPRs de type orthorhombique et axial-[010] peuvent être expliquée par une déformation en transpression liée à la formation de la chaîne Mozambique ou par la présence d'une relique d'un domaine cratonique à l'intérieur de la chaîne Mozambique. Dans l'axe du rift, les microstructures porphyroclastiques à mylonitiques suggèrent une déformation plus récente, accompagnée de réactions magma-roche sous des conditions proches du solidus, suivie d'un recuit variable. L'hétérogénéité des microstructures enregistrées par les échantillons du rift suggère de multiples épisodes de déformation localisée, probablement liés à l'injection percolation épisodique de magmas, espacés de périodes d'accalmie. Les OPRs de l'olivine de type axial-[100] et l'orientation des directions de polarisation des ondes SKS suggère que le rift s'est formé en régime de transtension Les péridotites du Sud-Est de l’Éthiopie présentent des microstructures porphyroclastiques à gros grains moins recristallisées qu'en Tanzanie. Les microstructures et les OPRs principalement de type orthorhombique suggèrent une déformation syn- à post-métasomatisme. Les anisotropies de polarisation des ondes S calculées pour ces échantillons sont insuffisantes pour expliquer à elles seules les déphasages des ondes SKS dans cette partie du rift.
https://tel.archives-ouvertes.fr/tel-01684759

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2014MON20139
tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759/document
https://tel.archives-ouvertes.fr/tel-01684759/file/43443_BAPTISTE_2014_archivage_cor.pdf