Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : HAL CCSD Elsevier
Résumé : We use a triangular representation of the plunges of P, B, and Taxes to compare the different ways tectonic regime is inferred from earthquake focal mechanisms in recent works. We argue that P, B, and Taxes provide a reasonable estimate of principal stress directions when faulting is close to Andersonian conditions, and that this can be estimated from the location on a triangular diagram. We analyze the geometrical relationship between the plunges of P, B, and Taxes on one hand, and the rake of slip and dip of nodal planes on the other hand. We show that the rake and dip level curves correspond to trajectories of the vertical direction along great and small circles with respect to the frame of the P, B. and Taxes. This shows that dip-slip faulting is compatible with vertical P or Taxes, but does not require it, and instead requires horizontal B axes. It also shows that strike-slip faulting does not require vertical B axes, but P and Taxes with equal plunges. This also reveals that focal mechanisms where P, B, and Taxes all have moderate plunge correspond to two very different types of nodal planes: a steeply dipping one with oblique slip and a moderately dipping one with strike-slip. Seismically active and moderately dipping strike-slip faults are to be found among these events.
ISSN: 0040-1951

hal-00486367
https://hal.archives-ouvertes.fr/hal-00486367
DOI : 10.1016/j.tecto.2009.03.006

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Although magmatism may occur during the earliest stages of continental rifting, its role in strain accommodation remains weakly constrained by largely 2-D studies. We analyze seismicity data from a 13 month, 39-station broadband seismic array to determine the role of magma intrusion on state-of-stress and strain localization, and their along-strike variations. Precise earthquake locations using cluster analyses and a new 3-D velocity model reveal lower crustal earthquakes beneath the central basins and along projections of steep border faults that degas CO2. Seismicity forms several disks interpreted as sills at 6-10 km below a monogenetic cone field. The sills overlie a lower crustal magma chamber that may feed eruptions at Oldoinyo Lengai volcano. After determining a new ML scaling relation, we determine a b-value of 0.87±0.03. Focal mechanisms for 65 earthquakes, and 13 from a catalogue prior to our array reveal an along-axis stress rotation of ∼60° in the magmatically active zone. New and prior mechanisms show predominantly normal slip along steep nodal planes, with extension directions ∼N90°E north and south of an active volcanic chain consistent with geodetic data, and ∼N150°E in the volcanic chain. The stress rotation facilitates strain transfer from border fault systems, the locus of early-stage deformation, to the zone of magma intrusion in the central rift. Our seismic, structural, and geochemistry results indicate that frequent lower crustal earthquakes are promoted by elevated pore pressures from volatile degassing along border faults, and hydraulic fracture around the margins of magma bodies. Results indicate that earthquakes are largely driven by stress state around inflating magma bodies.
ISSN: 1525-2027

hal-01667198
https://hal.archives-ouvertes.fr/hal-01667198
DOI : 10.1002/2017GC007027

Éditeur(s) : Amer Geophysical Union
Résumé : After the January 12, 2010, Haiti earthquake, we deployed a mainly offshore temporary network of seismologic stations around the damaged area. The distribution of the recorded aftershocks, together with morphotectonic observations and mainshock analysis, allow us to constrain a complex fault pattern in the area. Almost all of the aftershocks have a N-S compressive mechanism, and not the expected left-lateral strike-slip mechanism. A first-order slip model of the mainshock shows a N264 degrees E north-dipping plane, with a major left-lateral component and a strong reverse component. As the aftershock distribution is sub-parallel and close to the Enriquillo fault, we assume that although the cause of the catastrophe was not a rupture along the Enriquillo fault, this fault had an important role as a mechanical boundary. The azimuth of the focal planes of the aftershocks are parallel to the north-dipping faults of the Transhaitian Belt, which suggests a triggering of failure on these discontinuities. In the western part, the aftershock distribution reflects the triggering of slip on similar faults, and/or, alternatively, of the south-dipping faults, such the Trois-Baies submarine fault. These observations are in agreement with a model of an oblique collision of an indenter of the oceanic crust of the Southern Peninsula and the sedimentary wedge of the Transhaitian Belt: the rupture occurred on a wrench fault at the rheologic boundary on top of the under-thrusting rigid oceanic block, whereas the aftershocks were the result of the relaxation on the hanging wall along pre-existing discontinuities in the frontal part of the Transhaitian Belt. Citation: Mercier de Lepinay, B., et al. (2011), The 2010 Haiti earthquake: A complex fault pattern constrained by seismologic and tectonic observations, Geophys. Res. Lett., 38, L22305, doi:10.1029/2011GL049799.
Geophysical Research Letters (0094-8276) (Amer Geophysical Union), 2011-11 , Vol. 38 , N. L22305 , P. 7 p.

Droits : 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00054/16557/14071.pdf
DOI:10.1029/2011GL049799
http://archimer.ifremer.fr/doc/00054/16557/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The southernmost part of the Ryukyu subduction, where the Philippine Sea Plate is subducting under the Eurasian Plate, is known to be a very seismically active region of transition from a north-dipping subduction along the Ryukyu subduction to an ~ SE-NW collision along the Taiwanese orogenic wedge. In this paper, we will focus on the Ryukyu forearc area close to Taiwan where the deformation is paroxysmal. In order to decipher the nature of the seismic deformation in this region, a three month passive experiment, combining 22 Ocean Bottom Seismometers and 51 onland stations, has been led. Starting from an a-priori heterogeneous model, we have obtained 801 well-located earthquake hypocenters, a precise P-wave tomography model and 14 focal mechanisms. The seismicity along the Ryukyu forearc is mainly located not only in the vicinity of the Interplate Seismogenic Zone (ISZ) but also within both the subducting PSP and the overriding plate. Seismicity within the upper-plate is essentially localized east of Nanao basin where NW-SE extension occurs, and northwest of the Hoping basin where strike-slip dominates. As revealed by both the P-wave velocity structure and the newly derived seismicity, we argue that a sub-vertical step offsetting the subducting PSP around 10 km may support the presence of a trench-parallel tear. The PSP also undergoes extension in its upper part that is probably caused by buckling and slab pull. The P-wave velocity structure reveals three other major features: (1) a continuity between the Central Range and the Ryukyu Arc with a shallower Moho (~ 30 km depth) between ~ 122.3°N and ~ 122.5°N along the Ryukyu Arc, (2) high P-wave velocities along the eastern side of the Central Range and, (3) two bodies with similar high crustal velocities (6.5-7.0 km/s) at 12-18 km depths, embedded within the Ryukyu arc basement, just north of Hoping Basin and north of the Nanao Basin.
ISSN: 0040-1951

hal-00795521
https://hal.archives-ouvertes.fr/hal-00795521
DOI : 10.1016/j.tecto.2012.04.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Earth deformation is a multi-scale process ranging from seconds (seismic deformation) to millions of years (tectonic deformation). Bridging short- and long-term deformation and developing seismotectonic models has been a challenge in experimental tectonics for more than a century. Since the formulation of Reid's elastic rebound theory 100 years ago, laboratory mechanical models combining frictional and elastic elements have been used to study the dynamics of earthquakes. In the last decade, with the advent of high-resolution monitoring techniques and new rock analogue materials, laboratory earthquake experiments have evolved from simple spring-slider models to scaled analogue models. This evolution was accomplished by advances in seismology and geodesy along with relatively frequent occurrences of large earthquakes in the past decade. This coincidence has significantly increased the quality and quantity of relevant observations in nature and triggered a new understanding of earthquake dynamics. We review here the developments in analogue earthquake modelling with a focus on those seismotectonic scale models that are directly comparable to observational data on short to long timescales. We lay out the basics of analogue modelling, namely scaling, materials and monitoring, as applied in seismotectonic modelling. An overview of applications highlights the contributions of analogue earthquake models in bridging timescales of observations including earthquake statistics, rupture dynamics, ground motion, and seismic-cycle deformation up to seismotectonic evolution.
ISSN: 1869-9510

hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120/document
https://hal.archives-ouvertes.fr/hal-01553120/file/rosenau2017.pdf
DOI : 10.5194/se-8-597-2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This work focuses on the analysis of a unique set of seismological data recorded by two temporary networks of seismometers deployed onshore and offshore in the Central Lesser Antilles Island Arc from Martinique to Guadeloupe islands. During the whole recording period, extending from January to the end of August 2007, more than 1300 local seismic events were detected in this area. A subset of 769 earthquakes was located precisely by using HypoEllipse. We also computed focal mechanisms using P-wave polarities of the best azimuthally constrained earthquakes. We detected earthquakes beneath the Caribbean forearc and in the Atlantic oceanic plate as well. At depth seismicity delineates the Wadati-Benioff Zone down to 170 km depth. The main seismic activity is concentrated in the lower crust and in the mantle wedge, close to the island arc beneath an inner forearc domain in comparison to an outer forearc domain where little seismicity is observed. We propose that the difference of the seismicity beneath the inner and the outer forearc is related to a difference of crustal structure between the inner forearc interpreted as a dense, thick and rigid crustal block and the lighter and more flexible outer forearc. Seismicity is enhanced beneath the inner forearc because it likely increases the vertical stress applied to the subducting plate.
ISSN: 0040-1951

hal-01052679
https://hal.archives-ouvertes.fr/hal-01052679
DOI : 10.1016/j.tecto.2011.08.006

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The reactivation of faults with near-optimal orientations is commonly considered to control the state of stress in the crust. Near the surface, where a principal stress direction is vertical, the attitude of such faults is explained by Anderson's theory. This raises the questions of how prevalent this type of faulting actually is in current seismicity, down to what depth it frequently occurs, and what range of friction angles explains it best. The Global Centroid Moment Tensor catalog is analyzed to address these questions. Dip-slip and strike-slip mechanisms are dominant, and oblique slips are relatively rare for well-constrained events with depths shallower than 30 km. Preferred Andersonian faulting is the simplest, but not the unique, explanation for this dominance. Isolating reverse, strike- slip, and normal events reveals an asymmetry in the distribution of nodal plane dips and plunges of the P, B, and T axes between reverse and normal faulting. Assuming that the most frequent events correspond to reactivation near optimal orientations yields 40-60 degrees and 0-20 degrees friction angles for reverse and normal faults, respectively. This indicates that reverse and normal faulting mechanics are not symmetrical with respect to stress configuration as predicted by Anderson's theory.
ISSN: 8755-1209

hal-00412159
https://hal.archives-ouvertes.fr/hal-00412159
DOI : 10.1029/2007RG000240

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We analyze focal mechanisms of shallow-intermediate earthquakes in a NW-SE transect along the western Betic Cordillera and Alboran Sea, and deep earthquakes located in the central Betics to constrain the state of stress at the Gibraltar Arc slow convergence area. Shallow earthquakes (< 40 km) are preferably clustered at the mountain front. A general NW-SE horizontal compression is compatible with the convergence, and NW plunging compression axes are in agreement with frontal thrust activity. Toward the Alboran Sea the earthquakes are progressively deeper, reaching intermediate depths (40-120 km) near the coast and supporting the present-day activity of subduction only in this area. The Iberian continental crust concentrates most of the intermediate seismicity and is forced to partially sink into the mantle, probably through the pull of the oceanic slab. This downdip pull together with the buoyancy of the Iberian continental crust produces the slab curvature, downdip extension in the external arc of the continental slab, and downdip compression in the inner arc. T axes highly dipping to the southeast at 90-120 km depth occur at the oceanic/continental transition. Deep earthquakes (> 620 km) show very similar focal mechanisms, fitting the general slab behavior of resistance to further descent at the 660 km discontinuity. Seismicity features evidence the present-day stress distribution in a context of transition from subduction to continental collision.
ISSN: 1525-2027

hal-00669889
https://hal.archives-ouvertes.fr/hal-00669889
DOI : 10.1029/2011GC003824

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 2004 Aceh and 2005 Nias events are the two greatest earthquakes of the past 40 years with a total rupture of 1700 km long and a coseismic slip reaching up to 25 m. These two earthquakes have caused large stress perturbations which significantly altered seismic activity in the Sumatra-Andaman region. Using both detailed mapping of failure planes and various slip distributions, we calculate this stress change along the Sumatra-Andaman-Sagaing fault system from central Sumatra to southern Myanmar. The static Coulomb stress change Delta CFF and the observed seismic activity are in very good agreement with a Coulomb index similar to 20% greater than the one obtained for random events. Compared to previous studies, this high Coulomb Index confirms two important issues on the use of static stress change criterion: unsuited to study near-field aftershocks and only relevant for aftershocks analysis on large and mature faults at a time scale of several months. The calculated Delta CFF distribution suggests that the 2004 and 2005 earthquakes inhibit failure on the North Andaman rift and on the Sagaing fault, while failure is encouraged along the transform Andaman zone, the central Andaman rift, the West Andaman fault, the Sumatra fault system, and the offshore thrust faults west of Sumatra Island. The maximum value of similar to 15-20 bar (1.5-2 MPa) for Delta CFF is reached in the northern part of the Sumatra fault system. This high value together with the lack of major earthquake in the last 170 years result in a high seismic hazard for this region. Our results are also consistent with temporal evolution of both earthquakes' location and focal mechanism prior to and after the events. In particular, we explain the occurrence and the mechanism of seismic swarms observed in the central Andaman rift and along the west Andaman fault. Finally, our calculations reveal that the seismicity in the Andaman rift zone can only be explained if mu' > 0.5. This result leads to two end-member models: one with a constant and high fault friction and one with spatial variations, for which friction may depend on either the nature of the lithosphere (oceanic versus continental) or the fault type.
ISSN: 1525-2027

hal-00456027
https://hal.archives-ouvertes.fr/hal-00456027
DOI : 10.1029/2008GC002167

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fault pseudotachylytes form by frictional melting during seismic slip and therefore are widely interpreted as “earthquake fossils.” Rapid movement along a rupture surface typically forms a pseudotachylyte generation vein, the thickness of which increases with earthquake magnitude. The direction and sense of seismic slip cannot always be determined due to the generally complex geometry of pseudotachylyte veins. Here we show, for the first time, that the orientation of the magnetic fabric of fault pseudotachylytes indicates both direction and sense of seismic slip. The magnetic fabric, acquired in a manner similar to that of other magmas, arises in this case from the asymmetric preferred orientation of paramagnetic grains during viscous shear of the friction melt. This kinematic information, coupled with fault plane orientation and generation vein thickness, provides new and critical insight for the earthquake focal mechanism. The magnetic fabric of pseudotachylytes therefore not only constitutes a valuable kinematic criterion for these fault rocks, but also could expand our knowledge of prehistoric seismic events.
ISSN: 0091-7613

hal-01217133
https://hal.archives-ouvertes.fr/hal-01217133
DOI : 10.1130/G36587.1

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Mechanisms that control seismic activity in low strain rate areas such as western Europe remain poorly understood. For example, in spite of low shortening rates of <0.5 mm/ yr, the Western Alps and the Pyrenees are underlain by moderate but frequent seismicity detectable by instruments. Beneath the elevated part of these mountain ranges, analysis of earthquake focal mechanisms indicates extension, which is commonly interpreted as the result of gravitational collapse. Here we show that erosional processes are the predominant control on present-day deformation and seismicity. We demonstrate, using fi nite element modeling, that erosion induces extension and rock uplift of the elevated region of mountain ranges accommodating relatively low overall convergence. Our results suggest that an erosion rate of ~1 mm/yr can lead to extension in mountain ranges accommodating signifi cant shortening of <3 mm/yr. Based on this study, the seismotectonic framework and seismic hazard assessment for low strain rate areas need to be revisited, because erosion-related earthquakes could increase seismic hazard.
ISSN: 0091-7613

insu-00817341
https://hal-insu.archives-ouvertes.fr/insu-00817341
DOI : 10.1130/G33942.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
After the January 12, 2010, Haiti earthquake, we deployed a mainly offshore temporary network of seismologic stations around the damaged area. The distribution of the recorded aftershocks, together with morphotectonic observations and mainshock analysis, allow us to constrain a complex fault pattern in the area. Almost all of the aftershocks have a N‐S compressive mechanism, and not the expected left‐lateral strike‐slip mechanism. A first‐order slip model of the mainshock shows a N264°E north‐dipping plane, with a major left‐lateral component and a strong reverse component. As the aftershock distribution is sub‐parallel and close to the Enriquillo fault, we assume that although the cause of the catastrophe was not a rupture along the Enriquillo fault, this fault had an important role as a mechanical boundary. The azimuth of the focal planes of the aftershocks are parallel to the north‐dipping faults of the Transhaitian Belt, which suggests a triggering of failure on these discontinuities. In the western part, the aftershock distribution reflects the triggering of slip on similar faults, and/or, alternatively, of the south‐dipping faults, such the Trois‐Baies submarine fault. These observations are in agreement with a model of an oblique collision of an indenter of the oceanic crust of the Southern Peninsula and the sedimentary wedge of the Transhaitian Belt: the rupture occurred on a wrench fault at the rheologic boundary on top of the under‐thrusting rigid oceanic block, whereas the aftershocks were the result of the relaxation on the hanging wall along pre‐existing discontinuities in the frontal part of the Transhaitian Belt.
ISSN: 0094-8276

insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489/document
https://hal-insu.archives-ouvertes.fr/insu-00643489/file/GRL-haiti.2011.pdf
DOI : 10.1029/2011GL049799

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : We use InSAR to measure deformation and kinematics of the Mw = 4.9 Borujerd (2005/05/03) and Mw = 6.1 Chalan-Chulan (2006/03/31) earthquakes that occurred in the Zagros fold-and-thrust belt. The focal mechanism of the 2006 event is consistent with right lateral strike-slip motion and the event ruptured the Dorud-Borujerd segment of the Main Recent Fault. An Envisat interferogram spanning the 2006 event shows peak ground deformation of 9 cm in the satellite line-of-sight along a 10 km long fault portion. The interferogram spanning the 2005 earthquake is rather related to atmospheric artefact than to ground deformation. Dislocation models of the 2006 Chalan-Chulan event indicate dextral slip amounting to a maximum of 90 cm at a depth of 4 km. The predicted vertical displacements are in good agreement with differential levelling data. The 2006 event filled only a small part of the seismic gap located between large M = 7 events that occurred in 1909 and 1957.
ISSN: 0954-4879

hal-00411313
https://hal.archives-ouvertes.fr/hal-00411313
DOI : 10.1111/j.1365-3121.2008.00797.x

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics.We herein focus on "subduction infancy", which corresponds to the first 0-2 My immediately following subductionnucleation, when a newly born slab penetrates into the overriding plate mantle and heats up.The only remnants of this critical, yet elusive, geodynamic step are thin metamorphic soles, commonly found beneathpristine, 100-1000 km long portions of oceanic lithosphere emplaced on top of continents (i.e. ophiolites).In this study, we show how, during subduction infancy, transient mechanical properties of both the mantle and crustacross the subduction plate interface (during 100s ky) control and hinder the penetration of tectonic plates intothe mantle, and how this results in strong peaks of resistance and even slicing of their surface — leaving behindthin, chopped-off metamorphic slivers (i.e. metamorphic soles).These findings constrain the mechanical behaviour of the subduction plate interface (with implications for couplingprocesses and earthquake generation) as well as the properties of the crust and mantle. They also highlight the roleof fluids in enabling subduction to overcome this early resistance.
Geophysical Research Abstracts
Vienne, Austria

insu-01309386
https://hal-insu.archives-ouvertes.fr/insu-01309386

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This paper investigates the orientation and sources of stress in the forearc of the Cascadia subduction zone in southwest British Columbia, using Bayesian inversion results from focal mechanism data and comparing results with GPS derived short-term strain rates. The subduction margin in this region includes a change in orientation from N-S in Washington State to NW-SE in British Columbia. Over 1000 focal mechanisms from North American crustal earthquakes have been calculated to identify the dominant style of faulting, and ∼600 were inverted to estimate the principal stress orientations and the stress ratio. Our results indicate the maximum horizontal compressive stress orientation changes with distance to the trench, from approximately margin-normal along the coast to approximately margin-parallel 100-150 km inland from the coast. Comparing stress orientations with GPS data, we relate the margin-normal stress direction to subduction-related strain rates due to the locked interface between the North American and Juan de Fuca plates just west of Vancouver Island. Further from the margin the plates are coupled less strongly, and the margin-parallel maximum horizontal compressive stress in the North American Plate relates to the northward push of the Oregon Block, which is also observed in the horizontal shortening direction of the residual strain rates, after the subduction component is removed.
ISSN: 0148-0227

hal-00853734
https://hal.archives-ouvertes.fr/hal-00853734
DOI : 10.1029/2010JB008003