Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A set of synthetic aggregates, containing mixtures of calcite and muscovite, were compacted with varying uniaxial loads ranging from 20 MPa up to 400 MPa. Their elastic properties have been measured using compressional and shear waves in confining hydrostatic pressures up to 475 MPa. Measured seismic velocities are shown to depend on 1) the ratio of calcite to muscovite, 2) the uniaxial load used during sample manufacturing, and 3) the porosity amount prior to velocity measurements. The matrix framework may also affect the seismic velocities, but this effect is not easily quantifiable. In general, measured seismic velocities decrease with increasing muscovite content and porosity. Elastic properties have been calculated based on texture measurements, which were obtained by neutron diffraction. The calculated velocities are based on the calcite and muscovite single crystal elastic tensors, their orientation distribution functions, and their modal fractions. A large discrepancy is apparent between calculated and measured velocities, where the former always overestimate the actual velocities. Shear waves display less of a difference between calculated and measured values, than do compressional waves, indicating that waves propagating by shearing are less affected by sample porosity and matrix framework. A better agreement between measured and calculated seismic velocities arises when the initial porosity is taken into account, using a differential effective medium model. Seismic anisotropy is evident from both measured and calculated velocities, and is low for samples containing pure calcite, but becomes prominent as the muscovite concentration increases. The intensity of anisotropy further depends on the uniaxial load used during sample compaction and the initial porosity.
ISSN: 0148-0227

hal-00512666
https://hal.archives-ouvertes.fr/hal-00512666
DOI : 10.1029/2009JB006523

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Carbon is transported from Earth's surface into its interior at subduction zones. Carbonates in sediments overlying hydrothermally altered rocks (including serpentinites) within the subducted slab are the main carriers of this carbon1. Part of the carbon is recycled back to the surface by volcanism, but some is transferred to the deep Earth1, 2. Redox transformations during shallow subduction control the transfer and long-term fate of carbon, but are poorly explored1, 3. Here we use carbon stable isotopes and Raman spectroscopy to analyse the reduction of carbonate in an exhumed serpentinite-sediment contact in Alpine Corsica, France. We find that highly crystalline graphite was formed during subduction metamorphism and was concentrated in the sediment, within a reaction zone in direct contact with the serpentinite. The graphite in this reaction zone has a carbon isotopic signature (δ13C) of up to 0.8±0.1‰, similar to that of the original calcite that composed the sediments, and is texturally associated with the calcium-bearing mineral wollastonite that is also formed in the process. We use mass-balance calculations to show that about 9% of the total carbonaceous matter in the sedimentary unit results from complete calcite reduction in the reaction zone. We conclude that graphite formation, under reducing and low-temperature conditions, provides a mechanism to retain carbon in a subducting slab, aiding transport of carbon into the deeper Earth.
ISSN: 1752-0894

hal-00903464
https://hal.archives-ouvertes.fr/hal-00903464
DOI : 10.1038/NGEO1827

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : A differential effective medium (DEM) model is used to predict elastic properties for a set of porous and anisotropic aggregates, comprised of mixtures of calcite and muscovite. The DEM takes into consideration an anisotropic background medium with triclinic or higher symmetry, in which inclusions of idealized ellipsoidal shape are added incrementally. In general, the calculated elastic properties of a solid that contains inclusions representing "dry" pores/cracks are strongly dependent on the orientation and aspect ratio of the inclusions. Aspect ratios of inclusions in the synthetic aggregates, which consist of air-filled pores, are estimated from anisotropy of magnetic susceptibility (AMS) of samples whose pore space has been impregnated with a colloidal ferrofluid. The AMS derived pore shape geometry is used as an input value for inclusions in the DEM. Modeling results are compared with laboratory determined elastic properties, measured with ultrasonic waves. Calculated shear wave velocities agree in general well with laboratory measured S wave velocities, whereas calculated P wave velocities are typically 0.5-1.1 km/s higher than measured values. Differences between calculated and measured P wave velocities are attributed mainly to incomplete and biased ferrofluid saturation of pores. Spherical pores are preferably filled during imbibition, in comparison to thin cracks, which leads to overprediction of the calculated P wave velocities. The amount of ferrofluid that fills the pore space is dependent on the ratio of calcite to muscovite and the load used for compaction during sample synthesis. The permeability decreases with increasing muscovite content and increasing compaction load. Incomplete saturation of samples with high-muscovite content is confirmed by X-ray microtomography density contrast imaging of dry and ferrofluid saturated specimens.
ISSN: 0148-0227

hal-00617717
https://hal.archives-ouvertes.fr/hal-00617717
DOI : 10.1029/2010JB007750

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This paper presents a synthesis of a multidisciplinary study carried out along the Nîmes Roman aqueduct, located in the southeast part of France. The study was motivated by archaeologists attempting to explain the partial destructions of only one aerial bridge of the aqueduct (Pont de la Lône). Given its close proximity to the Nîmes seismically active fault, a possible seismic origin for the destructions was invoked. Seismologists and structural engineers thus carried out a variety of field and numerical investigations to test the seismic hypothesis. Supporting field evidence was found first along the aerial bridge section of the aqueduct: broken stalactites, arch warping, cracks and destruction of the bridge just above a breast wall shortly after its construction. Secondly, the underground part of the canal was analysed: irregularity in the thickness of calcite deposits of the canal walls, presence of numerous cracks, horizontal shift of the otherwise linear structure of the canal and presence of calcite twins in the deposits, found only where the canal crosses the Nîmes fault system. Numerical modelling and experimental results show that (1) only the Pont de la Lône would have suffered serious damage under seismic solicitation (assuming an M6 earthquake at 10 km distance). The second aerial bridge, the three levels arches Pont du Gard, an historical monument still standing today, would have suffered less damage, due to its very different fundamental frequency of around 0.4 Hz, far from the amplified seismic near-field spectrum; (2) the numerical models also show that a fall of the canal wall would require a higher magnitude event (M > 6); (3) the presence of calcite twinning requires a differential static stress of 4 MPa or greater, which can only be achieved very close to the fault rupture of a M > 6 earthquake; (4) finally, local surface rupturing of such a fault would also corroborate the hypothesis that the observed offset of the canal may be partly seismically induced. Although other possible origins for each individual evidence may not be excluded, the observed spatiotemporal concentration of architectural/geological anomalies together with the numerical results allow us to support a possible co-seismic origin for these disorders, indirectly attesting to the potential seismic activity (M > 6) of the nearby Nîmes fault. Furthermore, following the conclusions of archaeological studies, the disorders occurred between 250 and 350 year AD, thus providing timing for this possible seismic event, an essential parameter in seismic hazard analysis. These results validate the archaeo-seismological approach as a tool that may help improve the knowledge of major infrequent earthquakes in areas of moderate seismic activity.
ISSN: 0921-030X

hal-00379064
https://hal.archives-ouvertes.fr/hal-00379064
DOI : 10.1007/s11069-008-9276-9

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Coastal aquifers often display seawater intrusion resulting in the formation of a salty water wedge progressing inland. This study investigates the mass transfers in the mixing zone at the freshwater-seawater interface where the water is out of equilibrium with the rock-forming carbonates. Investigations were conducted in two boreholes, separated by 5 m, at the Ses Sitjoles test site (Mallorca Island, Spain) where repeated electrical conductivity logs of the formation and the saturating fluid, as well as regular pore-water sampling and permanent downhole multi-parameter monitoring of the water were performed over a period of 9 a. In the mixing zone, the significant acidification, the calcite saturation index profile and the Ca concentration profile cannot be explained by conservative mixing nor by dissolution-precipitation reactions only. Conversely, the analysis of organic C content and of the distinctly different time-resolved pH profiles measured in the two boreholes suggests the development of perennial biomass that triggers calcite dissolution. Moreover, the presence of biomass seems to be correlated with the permeability and vertical connectivity at the meter-scale. It is speculated that the mechanism could be self-activated because the microbiological activity induces calcite dissolution and tends to increase porosity and permeability that favors biomass development.
ISSN: 0883-2927

hal-00937665
https://hal.archives-ouvertes.fr/hal-00937665
DOI : 10.1016/j.apgeochem.2013.09.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene-lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 degrees C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of similar to 208 degrees C and a burial depth of similar to 5.7 km. The second stage corresponds to a fault reactivation at a temperature of similar to 240 degrees C and a burial depth of similar to 6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene-early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.
ISSN: 0191-8141

hal-00644828
https://hal.archives-ouvertes.fr/hal-00644828
DOI : 10.1016/j.jsg.2011.06.006

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] The Pyrenees, north of the North Pyrenean fault, display a complex structure involving a succession of peridotite massifs, basement massifs, and mid-Cretaceous to Late Cretaceous basins located in a narrow domain, which was affected by a mid-Cretaceous, preorogenic, high-temperature, low-pressure metamorphism. The Late Cretaceous basins were interpreted either as pull-apart basins formed during transcurrent motion of Iberia relative to Eurasia or as remnants of a larger extensional basin. Recent models support that peridotite massifs result from the exhumation of the mantle during this preorogenic event. The northern boundary of the Agly basement massif shows evidence of ductile deformation of the basal formations of the Agly sedimentary cover. Macroscopic and microscopic kinematics indicators consistent with asymmetry of crystallographic fabrics suggest normal sense of shear and thus suggest detachment, at least partial, of the Mesozoic cover from its basement. Triassic to Early Cretaceous limestones are mylonitic and consistently shows a foliation, a NS- to NE-trending lineation, shear criteria suggesting top-to-the-north shearing and locally boudinage. At the microscopic scale, mylonites are characterized by a very fine grain size, frequently <10 µm. They contain larger, partially recrystallized calcite parent grains and undeformed quartz grains with calcite fringes crystallized in pressure shadows. In these mylonites, calcite systematically shows a weak but well-defined crystallographic-preferred orientations, suggesting HT dislocation creep combined to diffusion creep and possibly grain boundary sliding in the finest fraction of the mylonites. Paleotemperatures determined using Raman spectrometry suggest synkinematic temperature conditions in the range 340-390°C, in good agreement with observed microstructures and calcite CPO. The mylonitic fabric in Mesozoic limestones is folded by EW-trending Pyrenean folds north of the Agly basement massif, attesting that this fabric formed before the Pyrenean orogeny. These data consistently support preorogenic extension under medium-temperature conditions of the northern Agly massif and likely of the massif itself. Since simultaneously (~100 Ma) a mid-Cretaceous basin opened south of the basement massif, we suggest a model of preorogenic exhumation of the Agly massif in response to the regional extension associated to the rotation of Iberia. This model may explain the exhumation of the North Pyrenean massifs during a single preorogenic event that allowed the opening of extensional basins and the exhumation of the lithospheric mantle. All these structures being subsequently reworked during the Pyrenean orogeny.
ISSN: 0278-7407

hal-00852833
https://hal.archives-ouvertes.fr/hal-00852833
DOI : 10.1002/tect.20015

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In fold-and-thrust belts, shortening is mainly accommodated by thrust faults which are preferential zones for recrystallisation and mass transfer. This study focuses on a detachment fault related to the emplacement of the Monte Perdido thrust unit in the southern Pyrenees. The studied fault zone consists of a 10 m thick intensively foliated phyllonite developed within the Millaris marls, of Eocene age. The lithological homogeneity of the hanging wall and footwall allows us to compare the Millaris marls outside the fault zone with the highly deformed marls located in the fault zone and to quantify the chemical, mineralogical and volumetric changes related to deformation processes along the fault. The Millaris marls are composed of detrital quartz, illite, chlorite, minor albite and pyrite, in a micritic calcite matrix. In the fault zone, the cleavage planes are marked by clay minerals and calcite ± chlorite veins attest to fluid-mineral interactions during deformation. The mineral proportions in all samples from both the fault zone and Millaris marls have been quantified by two methods: (1) X-ray diffraction and Rietveld refinement, and (2) bulk chemical analyses as well as microprobe analyses to calculate modal composition. The excellent agreement between the results of these two methods allows us to estimate mineralogical variations using a modification of the Gresens' equation. During fault activation, up to 45 wt% of calcite was lost while the amounts of quartz and chlorite remained unchanged. Illite content remained constant to slightly enriched. The mineralogical variations were coupled with a significant volume loss (up to 45%) mostly due to the dissolution of micritic calcite grains. Deformation was accompanied by pressure solution and phyllosilicates recrystallisation. These processes accommodated slip along the fault. They required fluids as catalyst, but they did not necessitate major chemical transfers.
ISSN: 0264-8172

hal-00976361
https://hal.archives-ouvertes.fr/hal-00976361
DOI : 10.1016/j.marpetgeo.2013.12.016

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have a fractal pore-grain interface. In this paper a computer simulated 3-D sedimentary rock structure generated by the Relaxed Ballistic Bidisperse Deposition Model (RBBDM), is investigated to characterize the micro structure of its pores. The pore volume and the rock-pore interface show the same fractal dimension indicating that the pore volume is a fractal. The two point density correlation is computed for the pore space and the results compare favourably with the range reported from experiments. An array of 2-D X-ray tomography micrograph sections of a real sedimentary rock, an oolitic limestone (pure calcite) from the Mondeville formation of Middle Jurassic age (Paris Basin, France), was used to generate a 3-D bitmap. The 3-D real rock sample generated in this manner, was analysed for similar studies as the simulated structure. The results were compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. Diffusion through the connected pore space of the simulated structure was studied using a random walk algorithm and the results compared with the similar simulation study done on the 3-D oolitic limestone specimen. In both cases diffusion was found to be anomalous indicating that the sedimentary rock has a fractal geometry. The favourable comparability of results between the simulated and real rock supports the usefulness of the model of sedimentary rock generation which can be applicable to transport phenomena.
ISSN: 0956-540X

hal-00823061
https://hal.archives-ouvertes.fr/hal-00823061
DOI : 10.1093/gji/ggs084

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A set of four reactive flow-through experiments at temperature T = 100 degrees C and total pressure P=12 MPa was performed in limestone reservoir samples. By using various ranging from 0.7 to 10 MPa, these experiments mimic mass transfers occurring (1) near the injection well, where the brine is almost saturated with CO2 (i.e. P-CO2 approximate to P), and (2) at increasing distances from the injection well, where the fluid displays lower values and higher divalent cation concentrations due rock dissolution along the fluid pathway. Results for P-CO2 = 10 MPa show non-uniform dissolution features associated with transport-controlled mass transfer, while reaction-controlled uniform dissolution is observed for P-CO2 = 2.5 MPa. The experiment with P-CO2 = 6 MPa allows investigating in detail the transition from transport-to reaction-controlled dissolution. Conversely, the experiment reproducing conditions far from the injection well (P-CO2 = 0.7 MPa), shows a decrease of porosity triggered by the precipitation of Mg-rich calcite. For all the dissolution experiments, the time-resolved porosity phi(t) can be modeled by a simple non-linear equation including parameters that characterise the dissolution regime triggered by the reactivity of the inlet fluid (measured by the Damkohler number, Da). Furthermore, all dissolution experiments display power scaling between permeability (k) and porosity (phi) with distinctly different scaling exponents characterising the reactivity of the fluid percolating the sample, independently from the decrease with time of the reactive surface area. It is shown also that dissolution at moderate positive values of Da seems the most efficient to increase permeability and promote a rapid spreading of the reaction front, while inducing minimal modification of the porosity in the vicinity of the CO2 injection well. These results can be used to parameterize the k-phi function for modeling the earliest dissolution processes occurring in the vicinity of the reaction front.
ISSN: 0009-2541

hal-00445277
https://hal.archives-ouvertes.fr/hal-00445277
DOI : 10.1016/j.chemgeo.2009.03.028

Éditeur(s) : HAL CCSD E Schweizerbart Science Publishers
Résumé : The occurrence and preservation of aragonite in eclogite-facies rocks of north-eastern Corsica is linked to an uncommon microtexture. Aragonite exclusively occurs as oriented fibres in garnet crystals of a graphitic, more or less siliceous marble that immediately overlies a serpentinite body of the meta-ophiolitic unit. The arrangement of the fibres is grossly radial, but more clearly sectoral in subhedral garnet, the fibres growing perpendicular to the garnet/matrix interface. Raman mapping reveals that the carbonate is calcite in the matrix and in poikiloblastic garnet cores, and that the fibres in the garnet mantle are aragonite alone in the case of a carbonate matrix, and both aragonite and quartz (in distinct fibres) in a quartz–carbonate matrix. These features are interpreted as prograde intergrowths, the result of garnet nucleation and growth in a calcite and then aragonite matrix (±quartz). Upon further heating and/or decompression, the aragonite matrix transformed back to calcite while the carbonates included in garnet retained their original structure, in spite of the relatively high temperature attained (ca. 500 °C). These aragonite relics are one more example of the preservation of a high-pressure polymorph through mechanical shielding of inclusions in a rigid host. The aragonite–garnet intergrowths are similar to quartz–garnet intergrowths described in amphibolite-facies graphitic schists. They are evidence that oriented inclusions in garnet are not necessarily precipitates (‘exsolutions'). Unlike precipitates, their orientation is controlled more by the shape of the garnet growth front than by symmetry constraints.
ISSN: 0935-1221

hal-00411136
https://hal.archives-ouvertes.fr/hal-00411136
DOI : 10.1127/0935-1221/2008/0020-1892

Éditeur(s) : HAL CCSD Elsevier
Résumé : The relationship between deformation and so-called fluid paleotransfers in minor faults has been analysed in an argillaceous formation located in the Causses Basin in France. The fluid paleotransfers are related to the fault activity to a large extent. We attempt to estimate the intensity of paleo-deviatoric stress magnitudes under which the fault activity may have occurred and consequently, the change in the structural fault permeability. The paleo-deviatoric stress magnitudes were calculated with the inverse method of Etchecopar applied to calcite twinning. The measured crystals are contained within the core zone of minor faults and this study is based on a previous complete microtectonic and microstructural analysis of the faults. In this paper, analysis of calcite twinning has been applied for the first time to vein fillings associated small faults in a context of relatively weak deformation, a condition ensured by the tectonic and structural analysis. Calculation and discussion of the paleo-deviatoric stress tensors in relation to the evolution of the structural fault permeability and to the hydraulic behaviour of the faults are the aim of this paper. The analysed faults, created and active during the same tectonic event, were permeable under a (;σ;1;–;σ;3;) mean value of 40–50 MPa. On the other hand, the reactivation of faults during a second tectonic event implies mean (;σ;1;–;σ;3;) value higher than 40–50 MPa, especially for the faults that are poorly oriented with respect to the principal tectonic stress directions. The core zone of these faults remained sealed and impermeable or became permeable by development of microcracks inside the pre-existing fillings.
ISSN: 0040-1951

hal-00407577
https://hal.archives-ouvertes.fr/hal-00407577
DOI : 10.1016/j.tecto.2006.09.014

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Brecciated and fractured peridotites with a carbonate matrix, referred to as ophicalcites, are common features of mantle rocks exhumed in passive margins and mid-oceanic ridges. Ophicalcites have been found in close association with massive peridotites, which form the numerous ultramafic bodies scattered along the North Pyrenean Zone (NPZ), on the northern flank of the Pyrenean belt. We present the first field, textural and stable isotopic characterization of these rocks. Our observations show that Pyrenean ophicalcites belong to three main types: (1) a wide variety of breccias composed of sorted or unsorted millimeter- to meter-sized clasts of fresh or oxidized ultramafic material, in a fine-grained calcitic matrix; (2) calcitic veins penetrating into fractured serpentine and fresh peridotite; and (3) pervasive substitution of serpentine minerals by calcite. Stable isotopic analyses (O, C) have been conducted on the carbonate matrix, veins and clasts of samples from 12 Pyrenean ultramafic bodies. We show that the Pyrenean ophicalcites are the product of three distinct genetic processes: (1) pervasive ophicalcite resulting from relatively deep and hot hydrothermal activity; (2) ophicalcites in veins resulting from tectonic fracturing and cooler hydrothermal activity; and (3) polymictic breccias resulting from sedimentary processes occurring after the exposure of subcontinental mantle as portions of the floor of basins which opened during the mid-Cretaceous. We highlight a major difference between the eastern and western Pyrenean ophicalcites belonging, respectively, to the sedimentary and to the hydrothermal types. Our data set points to a possible origin of the sedimentary ophicalcites in continental endorheic basins, but a post-depositional evolution by circulation of metamorphic fluids or an origin from relatively warm marine waters cannot be ruled out. Finally, we discuss the significance of such discrepancy in the characteristics of the NPZ ophicalcites in the frame of the variable exhumation history of the peridotites all along the Pyrenean realm.
ISSN: 1437-3254

insu-00944405
https://hal-insu.archives-ouvertes.fr/insu-00944405
https://hal-insu.archives-ouvertes.fr/insu-00944405/document
https://hal-insu.archives-ouvertes.fr/insu-00944405/file/clerc-etal-IJES-Review.pdf
DOI : 10.1007/s00531-013-0927-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study explores the dynamics of porosity and reactive surface area changes during porous limestone dissolution by CO2-rich water. The Sr and Ca concentrations in both the rock and the outlet solution are used to evaluate the reactive surface area changes of the two rock-forming calcites, i.e. micrite grains and sparite crystals, which have different trace element signatures. The geometric surface area measured with X-ray microtomography decreases slightly whereas the reactive surface area increases continuously with increasing porosity from 20.3 to 30.2%. Surprisingly, changes in reactive surface areas are very different between the two calcites. The reactive surface area changes in the micrite are parabolic while the reactive surface area of sparite increases greatly. The numerical model HYTEC is used to model the change in reactive surface areas during the experiment. Different geometrical models are tested. The model based on spherical-grain dissolution and spherical-pore growth fails to reproduce the experimental results, while the sugar-lump model provides reasonable agreement with the experiment.
ISSN: 0009-2541

hal-00445274
https://hal.archives-ouvertes.fr/hal-00445274
DOI : 10.1016/j.chemgeo.2009.01.032

Éditeur(s) : HAL CCSD Society of Economic Geologists
Résumé : International audience
The ~8-Moz Sadiola Hill gold deposit is located in the Kédougou-Kénieba inlier, a window of deformed ca. 2200 to 2050 Ma rocks that crop out in eastern Senegal and western Mali. The geology of the inlier differs from other Paleoproterozoic granite-greenstone belts and sedimentary basins by the abundance of carbonate rocks. The Sadiola Hill gold deposit occurs within 3 km of the Senegal-Mali shear zone, and country rocks in the region have undergone polycyclic deformation. The lithostratigraphy of the open pit consists of impure limestones overlain by younger sequences of detrital sedimentary rocks, which include arenite, wacke, and siltstone. The sedimentary rocks have been subjected to regional greenschist-facies metamorphism and have been intruded by multiple generations of synkinematic, calc-alkaline stocks and dikes. The bulk of the ore is hosted within a N-S- to NNW-trending, 10- to 50-m-wide, brittle-ductile dilational shear zone defined as the Sadiola shear zone. Gold lodes also occur along an array of steep NNE-trending shear zones. Geometric and kinematic analyses indicate that the ore-hosting structures were undergoing sinistral displacement at the time of mineralization, locally defined as the D3s NNW-SSE-shortening event. Hydrothermal alteration is polyphase and includes an early high-temperature calc-silicate phase (i.e., porphyroblastic growth of actinolite-tremolite) followed by a potassic phase (i.e., biotite-calcite-quartz ± K-feldspar-tourmaline-actinolite) that was synchronous with ore mineral deposition. Paragenetic studies reveal a multistage ore development that includes an As-rich sulfide stage, followed by an Au-Sb stage. The ore is associated with a metal enrichment suite of Au-As-Sb ± Cu-Fe-W-Mo-Ag-Bi-Zn-Pb-Te. The Sadiola Hill deposit shares a similar relative timing and structural setting to that of other world-class orogenic gold systems in the West African craton (e.g., Ashanti, Loulo), with gold deposition occurring during a period of transcurrent tectonics, after the cessation of region-wide compressional deformation. The high-temperature paragenesis at Sadiola Hill is atypical of gold mineralization in the craton and indicates that the late Eburnean tectono-magmatic activity between ca. 2080 and 2060 Ma played an important role in the dynamics of hydrothermal fluid circulation along the Senegal-Mali shear zone.
ISSN: 0361-0128

hal-01583358
https://hal.archives-ouvertes.fr/hal-01583358
DOI : 10.2113/econgeo.112.1.23

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We make this reply to Philippe Oliver's comments on the deformation of the Mesozoic cover of the northern Agly massif.
ISSN: 0278-7407

hal-00903419
https://hal.archives-ouvertes.fr/hal-00903419
https://hal.archives-ouvertes.fr/hal-00903419/document
https://hal.archives-ouvertes.fr/hal-00903419/file/Vauchez_et_al-2013-Tectonics.pdf
DOI : 10.1002/tect.20061