Éditeur(s) : INRA : Institut National de la Recherche Agronomique Université des Antilles. Service commun de la documentation University of Suriname
Extrait de : 52e congrès annuel de la Société caribéenne des plantes alimentaires / 52nd annual meeting of the Caribbean food crops society (CFCS), du 10 au 16 juillet 2016. INRA, CFCS
Description : The import data from the Ministry of Trade indicates that Suriname has increased pesticides imports over the last five years. According to research evidence, as much as 80% of potential production in various crops including rice would be lost as a result of agricultural pests without crop protection measures. Even though the benefits of chemical pesticides use are clear, negative health and environmental impacts of their use are also evident. In lieu of this information a study was conducted to determine small rice farmers? perceptions on their knowledge of pesticide use, and safety of pesticides in rice production For this investigation a questionnaire was adapted from a pesticide use survey to generate and collect meaningful data on perceptions of small rice farmer?s knowledge and practices related to pesticide use and safety aspects in rice production in Nickerie. The sample population consisted of 200 small rice farmers.?The collected data was analyzed using SPSS and Microsoft Excel. Descriptive statistics and correlation were used to describe the data. Findings reveal that the rice farmers are male, on the average older than 50 years and have more than 15 years of experience with rice production. Results also reveal that farmers perceive the recommended dosage as too little and therefore increase the dosage. They often mix different types of pesticides and do not use all of their protective equipment while spraying. Based on the results it is recommended to develop pesticide policies to stimulate farmers to practice safe pesticide use in Suriname. Les données d'importation du ministère du commerce indiquent que le Surinam a augmenté des importations de pesticides au cours des cinq dernières années. Selon des preuves de recherches, pas moins de 80% de production potentielle dans diverses cultures comprenant le riz serait perdu en raison des parasites agricoles sans mesures de protection des cultures. Quoique les avantages d'une utilité chimique de pesticides soient clairs, la santé et les impacts sur l'environnement négatifs de leur utilisation est également évident. Au lieu de cette information une étude a été entreprise pour déterminer les perceptions des petits agriculteurs de riz sur leur connaissance d'utilisation de pesticide, et la sécurité des pesticides dans la production de riz. Pour cette enquête un questionnaire a été adapté d'une enquête d'utilisation de pesticide pour se produire et rassembler des données significatives sur des perceptions de la connaissance du petit agriculteur de riz et des pratiques s'est rapporté aux conditions de sécurité d'utiliser-et de pesticide dans la production de riz dans Nickerie. La population témoin s'est composée de 200 petits agriculteurs de riz. Les données rassemblées ont été analysées utilisant SPSS et Microsoft Excel. Des statistiques descriptives et la corrélation ont été employées pour décrire les données. Les résultats indiquent que les agriculteurs de riz sont masculins, les plus vieux que 50 années moyennes et ont plus de 15 ans d'expérience avec la production de riz. Les résultats indiquent également que les agriculteurs perçoivent le dosage recommandé en tant que trop peu et augmentent donc le dosage. Ils souvent mélangent différents types de pesticides et n'utilisent pas tout leur équipement de protection tout en pulvérisant. Basé sur les résultats on lui recommande de développer des politiques de pesticide pour stimuler des agriculteurs pratiquer l'utilisation sûre de pesticide au Surinam.
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V16248
V16248

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
BACKGROUND: Sampling design is a key issue when establishing species inventories and characterizing habitats within highly heterogeneous landscapes. Sampling efforts in such environments may be constrained and many field studies only rely on subjective and/or qualitative approaches to design collection strategy. The region of Cacao, in French Guiana, provides an excellent study site to understand the presence and abundance of Anopheles mosquitoes, their species dynamics and the transmission risk of malaria across various environments. We propose an objective methodology to define a stratified sampling design. Following thorough environmental characterization, a factorial analysis of mixed groups allows the data to be reduced and non-collinear principal components to be identified while balancing the influences of the different environmental factors. Such components defined new variables which could then be used in a robust k-means clustering procedure. Then, we identified five clusters that corresponded to our sampling strata and selected sampling sites in each stratum. RESULTS: We validated our method by comparing the species overlap of entomological collections from selected sites and the environmental similarities of the same sites. The Morisita index was significantly correlated (Pearson linear correlation) with environmental similarity based on i) the balanced environmental variable groups considered jointly (p = 0.001) and ii) land cover/use (p-value<0.001). The Jaccard index was significantly correlated with land cover/use-based environmental similarity (p-value = 0.001). CONCLUSIONS: The results validate our sampling approach. Land cover/use maps (based on high spatial resolution satellite images) were shown to be particularly useful when studying the presence, density and diversity of Anopheles mosquitoes at local scales and in very heterogeneous landscapes.
BMC Ecology

pasteur-00914104
https://hal-riip.archives-ouvertes.fr/pasteur-00914104
https://hal-riip.archives-ouvertes.fr/pasteur-00914104/document
DOI : 10.1186/1472-6785-13-45
PUBMED : 24289184

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Metasedimentary rocks in the transition zone between the Pernambuco-Alagoas Domain and the Sergipano Belt (southern Borborema Province, NE Brazil) were studied in order to place constraints on the geological evolution of this portion of West Gondwana. High-grade metamorphic conditions are recorded by the garnet-sillimanite assemblage and common anatexis in pelitic paragneisses. Two samples dated by LA-ICP-MS in the north yielded a predominance of early Neoproterozoic detrital zircons, with age peaks between 990 Ma and 827 Ma, with the youngest grain suggesting deposition after 670 Ma. Low Th/U zircons (Th/U < 0.1) in these samples display a significant spread in ages, from 691 to 568 Ma. One sample in the south is dominated by a homogenous population of Paleoproterozoic grains, with a 2200 Ma peak. The southernmost sample also contains Paleoproterozoic zircons but the most abundant population is Neoproterozoic, and characterized by age peaks at c. 670, 647 and 623 Ma. These results show that deposition of sediments in the southern PEAL Domain and in the northern Sergipano Belt occurred in the Late Neoproterozoic. The differing age spectra between samples are correlated with potential source rocks in the study area or in its proximity, reflecting variable input from local sources. The data are interpreted to indicate that during the course of an extensional event at c. 673-647 Ma, Tonian granitic intrusions and synextensional metamorphic rocks were unroofed and eroded to provide zircons for sediments deposited in the north, whereas Paleoproterozoic and synextensional magmatic rocks were the main sources for sediments in the south. Peak metamorphic conditions and contractional deformation are constrained to c. 630-600 Ma.
ISSN: 0895-9811

hal-01468011
https://hal.archives-ouvertes.fr/hal-01468011
DOI : 10.1016/j.jsames.2016.09.010

Éditeur(s) : Elsevier
Résumé : Because Vibrio aestuarianus is known to cause serious infections in Pacific oyster Crassostrea gigas, a real-time PCR assay was developed targeting the dnaJ gene of this bacterium. Only V. aestuarianus strains isolated from C. gigas mortality events in different geographic areas and the reference strain tested positive, whereas no amplification products was obtained with type strains belonging to 23 other species of Vibrio. Sensitivity and reproducibility of the method were assessed using either seawater or oyster homogenate samples spiked with one V aestuarianus strain. All these samples were stored at -20 degrees C in order to mimic retrospective or grouped natural sample analysis without quantification bias due to prolonged freezing. Analysis of standard curves revealed excellent correlation values between light microscopy cell enumerations and PCR Threshold Cycle (Ct) values, and acceptable PCR reaction efficiencies for all type of samples. Quantification curves of both sample types were equivalent, with a detection level as low as 1.6 V. aestuarianus cells in the PCR reaction tube, corresponding to 1.6.10(2) cells ml(-1) and 1.6.10(2) cells mg(-1) in seawater and entire oyster samples, respectively, taking into account the dilution factor used for appropriate template DNA preparation. Comparison of PCR assay reproducibility according to the complexity of samples revealed that seawater samples gave more reproducible quantification measures than samples from oyster homogenate, with precision of measured Ct values inferior to 0.4 and 0.6 respectively at 99% confidence. Use of the real-time PCR assay allowed us to monitor V. aestuarianus load in oysters naturally infected with this pathogen. Furthermore, we were able to detect V aestuarianus in samples of seawater in which oysters had been reared and in algal cultures used for feeding oysters. Because of the rapidity and reliability of the real-time PCR assay method used in this study, just a few hours are needed compared with the two days required using the classic culture method, this technique will be particularly valuable in mollusc pathology laboratories, for monitoring the source and course of infections by V. aestuarianus in pathogenesis and epidemiologic studies, as well as for designing appropriate prophylactic control measures. (C) 2009 Elsevier B.V. All rights reserved.
Journal of Microbiological Methods (0167-7012) (Elsevier), 2009-05 , Vol. 77 , N. 2 , P. 191-197

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6447.pdf
DOI:10.1016/j.mimet.2009.01.021
http://archimer.ifremer.fr/doc/00000/6447/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The brittle to ductile transition (BDT) in rocks may strongly influence their transport properties (i.e., permeability, porosity topology ...) and the maximum depth and temperature where hydrothermal fluids may circulate. To examine this transition in the context of Icelandic crust, we conducted deformation experiments on a glassy basalt (GB) and a glass-free basalt (GFB) under oceanic crust conditions. Mechanical and micro-structural observations at a constant strain rate of 10(-5) s(-1) and at confining pressure of 100-300 MPa indicate that the rocks are brittle and dilatant up to 700-800 degrees C. At higher temperatures and effective pressures the deformation mode becomes macroscopically ductile, i.e., deformation is distributed throughout the sample and no localized shear rupture plane develops. The presence of glass is a key component reducing the sample strength and lowering the pressure of the BDT. In the brittle field, strength is consistent with a Mohr-Coulomb failure criterion with an internal coefficient of friction of 0.42 for both samples. In the ductile field, strength is strain rate-and temperature-dependent and both samples were characterized by the same stress exponent in the range 3 < n < 4.2 but by very different activation energy Q(GB) = 59 +/- 15 KJ/mol and Q(GFB) = 456 +/- 4 KJ/mol. Extrapolation of these results to the Iceland oceanic crust conditions predicts a BDT at similar to 100 degrees C for a glassy basalt, whereas the BDT might occur in non-glassy basalts at deeper conditions, i.e., temperatures higher than 550 +/- 100 degrees C, in agreement with the Icelandic seismogenic zone.
ISSN: 0148-0227

hal-00760905
https://hal.archives-ouvertes.fr/hal-00760905
DOI : 10.1029/2011JB008884

Résumé : A new strain of L. stylirostris was introduced in New Caledonia. Quarantine facilities were set up inland using RAS and artificial seawater. After 5 months of rearing, all the 16 initial families were still represented with a 50% average survival. Three samplings for known pathogens were made during that period, all of them negative. Half the animals were taken to outdoor ponds for rearing to reproduction size when the rest was used to test different arrangements for a biosecure rearing until reproduction. Numerous spawnings and nauplii were obtained but larval rearings could not be completed. Different options are considered for the set up of a biosecure facility allowing the rearing and the breeding of pathogen free strains of shrimp.
Afin de disposer d’une plus forte diversité génétique exploitable, des producteurs calédoniens ont, en relation avec l’Ifremer, récemment introduit d’Hawaii une autre souche de crevette de l’espèce Litopenaeus stylirostris, domestiquée et garantie exempte de pathogènes. Malgré cette garantie sanitaire, les crevettes ont été maintenues en observation dans une quarantaine tertiaire pendant cinq mois avant la sortie et l’élevage d’une moitié de l’effectif en bassins terre extérieurs. L’autre moitié a été conservée dans les installations de quarantaine comme stock de secours au cas où un problème affecterait les crevettes élevées à l’extérieur. Les installations de quarantaine ont été progressivement transformées, tout en continuant les élevages, afin de réaliser un prototype de conservatoire biosécurisé. Les crevettes ont été élevées jusqu’à la taille de géniteurs en utilisant de l’eau de mer artificielle puis de l’eau de mer naturelle traitée au chlore. Des essais de reproduction et d’élevage larvaire ont été menés et de nombreuses pontes fécondées ont été obtenues mais les élevages larvaires, à une exception, n’ont pas dépassé le stade Zoé 3. Les analyses par PCR réalisées sur les crevettes du conservatoire ont montré que les mesures et précautions sanitaires qui avaient été prises avaient préservé le statut sanitaire “sans pathogènes” initial. Cette expérience a permis de mieux cerner les problèmes qui pouvaient se poser pour la mise en place et le fonctionnement d’installations biosécurisées utilisant des circuits fermés. Ces enseignements ont servi à répertorier les principales contraintes envisageables pour la réalisation d’un futur conservatoire crevette qui viendrait conforter et sécuriser les souches actuellement disponibles en Nouvelle-Calédonie. Plusieurs options sont proposées pour les crevettes devant entrer dans le conservatoire (sans quarantaine, quarantaine tertiaire, quarantaine primaire puis secondaire) et pour le type de fonctionnement du conservatoire. Les principaux critères pour le choix du site, l’utilisation de l’eau de mer et son traitement, les systèmes de recirculation sont abordés; et des schémas d’installations de quarantaine et de conservatoire sont proposés.

Droits : 2007 Ifremer
http://archimer.ifremer.fr/doc/00117/22849/20659.pdf
http://archimer.ifremer.fr/doc/00117/22849/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Site U1309 was drilled at Atlantis Massif, an oceanic core complex, at 30 degrees N on the Mid-Atlantic Ridge (MAR). We present the results of a bulk rock geochemical study (major and trace elements) carried out on 228 samples representative of the different lithologies sampled at this location. Over 96% of Hole U1309D is made up of gabbroic rocks. Diabases and basalts cross-cut the upper part of the section; they have depleted MORB compositions similar to basalts sampled at MAR 30 degrees N. Relics of mantle were recovered at shallow depth. Mantle peridotites show petrographic and geochemical evidence of extensive melt-rock interactions. Gabbroic rocks comprise: olivine-rich troctolites (>70% modal olivine) and troctolites having high Mg# (82-89), high Ni (up to 2300 ppm) and depleted trace element compositions (Yb 0.06-0.8 ppm); olivine gabbros and gabbros (including gabbronorites) with Mg# of 60-86 and low trace element contents (Yb 0.125-2.5 ppm); and oxide gabbros and leucocratic dykes with low Mg# (<50), low Ni (similar to 65 ppm) and high trace element contents (Yb up to 26 ppm). Troctolites and gabbros are amongst the most primitive and depleted oceanic gabbroic rocks. The main geochemical characteristics of Site U1309 gabbroic rocks are consistent with a formation as a cumulate sequence after a common parental MORB melt, although (lack of systematic) downhole variations indicate that the gabbroic series were built by multiple magma injections. In detail, textural and geochemical variations in olivine-rich troctolites and gabbronorites suggest chemical interaction (assimilation?) between the parental melt and the intruded lithosphere. Site U1309 gabbroic rocks do not represent the complementary magmatic product of 30 degrees N volcanics, although they sample the same mantle source. The bulk trace element composition of Site U1309 gabbroic rocks is similar to primitive MORB melt compositions; this implies that there was no large scale removal of melts from this gabbro section. The occurrence of such a large magmatic sequence implies that a high magmatic activity is associated with the formation of Atlantis Massif. Our results suggest that almost all melts feeding this magmatic system stays trapped into the intruded lithosphere.
ISSN: 0012-821X

hal-00413562
https://hal.archives-ouvertes.fr/hal-00413562
DOI : 10.1016/j.epsl.2008.12.034

Éditeur(s) : University of West Indies, Trinidad &Tobago Université des Antilles. Service commun de la documentation
Extrait de : 52e congrès annuel de la Société caribéenne des plantes alimentaires / 52nd annual meeting of the Caribbean food crops society (CFCS), du 10 au 16 juillet 2016. INRA, CFCS
Description : The purpose of this study was to investigate the effect on milk composition of the inclusion of a fixed amount of solid prebiotic celmanac into a dairy feed before milking in lactating cows. Fourteen lactating cows, 3-4 mo lactating, were randomly equal in terms of approximate days into lactation, and allocated to one of two treatment groups: Control no Supplementation and Celmanax supplemented. Milk samples were collected every 7 days for approximately 8 weeks and sent to the lab for milk composition analysis and Draminski score testing. Cows supplemented with Celmanax had a higher (p<0.05) butter fat content (2.91%) when compared to the control (2.48%). SNF, protein & lactose percentages were lower (p<0.05) than the control Milk fat, SNF, or lactose percentages were not affected by treatment (P>.01) In conclusion, butterfat percentage was higher for cows supplemented with Celmanax than supplemented cows.
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V16310
V16310

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
TEM Study of Heavitree quartzite deformed at high temperatures and a pressure of 1.5 GPa with three different preparations: water-added, vacuum dried, and sodium doped show a wide range of dislocation microstructure. The vacuum dried sample has a very heterogeneous dislocation distribution varying from almost no dislocations to very high densities. Dislocation nucleation occurs by cross-slip mechanisms, such as Frank-Read sources and Orowan loops around hard inclusions. Shear bands develop in the basal plane composed of two closely spaced shear planes. Dislocations have straight segments and they are aligned along directions of dense packing, suggesting strong Peierls stress control due to the crystal structure. No voids, bubbles or dislocation walls where observed in the vacuum dried sample. The sodium-doped sample had a homogeneous high dislocation density. The water-added sample has a significantly lower, relatively uniform dislocation density. Bubbles associated with dislocations are seen in every grain. Dislocations were either present in loops around bubbles or as straight dislocations with small bubbles spaced along the dislocation line. Some of the long straight dislocations are aligned parallel to the c-axis. Sub-grains where very frequent, sometimes form cells of about 2 p,m in diameter with straight edges. Analysis of dislocations show 1/3 < a > and [c] dislocations in sub-grain walls and free 1/3 < a > dislocations on prism planes. There is clear evidence for dislocation climb with sub-grain walls, dislocation cells, dislocation junctions and dislocation debris of small loops. The major difference between vacuum dried and water-added samples are the homogeneity of the microstructure and evidence for climb in the water-added sample. Glide is clearly difficult, with a high Peierls stress in the vacuum dried sample as shown by areas of very low and very high dislocation density and the crystallographic control of dislocation line direction. The sodium-doped sample indicates that nucleation was easy by the high homogenous dislocation density, but no climb recovery has taken place. The density is high and the dislocations are strongly interacting causing tangles; no evidence for crystallographic control can be observed at these levels of strain. The activation energy for creep in Heavitree quartzite decreases with inferred water content of the specimens form 185 kJ mol(-1) for vacuum dried to 151 for 0.4 wt% water-added samples. Analysis of diffusion data for oxygen under hydrothermal conditions and inferred diffusion data for the hydrogarnet defect and dislocation velocity suggests activation energies for these processes are similar to the activation energy for the dislocation creep of Heavitree quartzite and other quartz aggregates. For data from the previously published experiments with the highest stress resolution there is a correlation between the A pre-factor in the power law creep equation and the activation energy for creep. It is speculated that the correlation may be due to variable hydrogarnet defect concentrations.
ISSN: 0031-9201

hal-00413112
https://hal.archives-ouvertes.fr/hal-00413112
DOI : 10.1016/j.pepi.2008.07.009

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotite xenoliths exhumed by Quaternary alkaline magmatism in the Tahalgha district, southern Hoggar, represent fragments of the subcontinental lithospheric mantle beneath the boundary between the two major structural domains of the Tuareg Shield: the ‘Polycyclic Central Hoggar’ to the east and the ‘Western Hoggar’, or ‘Pharusian Belt’, to the west. Samples were collected from volcanic centres located on both sides of a major lithospheric shear zone at 4°35' separating these two domains. Although showing substantial variations in their deformation microstructures, equilibrium temperatures and modal and chemical compositions, the studied samples do not display any systematic changes of these features across the 4°35' fault. The observed variations rather record small-scale heterogeneities distributed throughout the study area and reflecting the widespread occurrence of vein conduits and metasomatized wall-rocks related to trans-lithospheric melt circulation during the Cenozoic. These features include partial annealing of pre-existing deformation microstructures, post-deformation metasomatic reactions, and trace-element enrichment, coupled with heating from 750–900°C (low-temperature lherzolites) to 900–1150°C (intermediate-T lherzolites and high-T harzburgites and wehrlites). Trace-element modelling confirms that the range of rare earth element (REE) variations observed in the Tahalgha clinopyroxenes may be accounted for by reactive porous flow involving a single stage of basaltic melt infiltration into a light REE (LREE)-depleted protolith. Whole-rock compositions record the final entrapment of disequilibrium metasomatic melts upon thermal relaxation of the veins–wall-rock system. The striking correlations between equilibrium temperatures and trace-element enrichment favor a scenario in which the high-temperature peridotites record advective heat transport along melt conduits, whereas the intermediate- and low-temperature lherzolites reflect conductive heating of the host Mechanical Boundary Layer. This indicates that the lithosphere did not reach thermal equilibrium, suggesting that the inferred heating event was transient and was rapidly erased by thermal relaxation down to the relatively low-temperature present-day geotherm. The low-T (<900°C) deformed lherzolites (porphyroclastic to equigranular) are characterized by only incipient annealing and LREE-depleted clinopyroxene compositions. They were only weakly affected by the Cenozoic events and could represent relatively well-preserved samples from rejuvenated Pan-African lithosphere. Extensive lithospheric rejuvenation occurred either regionally during the Pan-African orogeny, as a result of lithospheric delamination or thermomechanical erosion after thickening, or more locally along the meridional shear zones. The low-T Tahalgha lherzolites are comparable with lherzolites from Etang de Lherz, southern France, interpreted as lithospheric mantle rejuvenated by melt-induced refertilization during a late stage of the Variscan orogeny.
ISSN: 0022-3530

hal-01107410
https://hal.archives-ouvertes.fr/hal-01107410
DOI : 10.1093/petrology/egu056

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
29 inorganic compounds (Al, As, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cu, Fe, Gd, K, Mg, Mn, Mo, Na, Nd, Ni, Pb, Sb, Se, Sr, Ti, U, V and Zn) were measured in the tap water of 484 representative homes of children aged 6 months to 6 years in metropolitan France in 2008-2009. Parents were asked whether their children consumed tap water. Sampling design and sampling weights were taken into account to estimate element concentrations in tap water supplied to the 3,581,991 homes of 4,923,058 children aged 6 months to 6 years. Median and 95th percentiles of concentrations in tap water were in mu g/L: Al: <10, 483, As: 02, 2.1; B: <100, 100; Ba: 30.7, 149.4; Ca: 85,000, 121,700; Cd: <0.5, <0.5; Ce: <0.5, <0.5; Co: <0.5, 0.8; Cr: <5, <5; Cu: 70, 720; K: 2210, 6740; Fe: <20, 46; Mn: <5, <5; Mo: <0.5,1.5; Na: 14,500, 66,800; Ni: <2,10.2; Mg: 6500,21,200; Pb: <1, 5.4; Sb: <0.5, <0.5; Se: <1, 6.7; Sr: 256.9, 1004; TI: <0.5, <0.5; U: <0.5, 2.4; V: <1, 1; Zn; 53, 208. Of the 2,977,123 young children drinking tap water in France, some were drinking water having concentrations above the 2011 World Health Organization drinking water quality guidelines: respectively 498 (CI 95%: 0-1484) over 700 mu g/L of Ba; 121,581 (CI 95%: 7091-236,070) over 50 mg/L of Na; 2044 (CI 95%: 0-6132) over 70 mu g/L of Ni, and 78,466 (17,171-139,761) over 10 mu g/L of Pb. Since it is representative, this tap water contamination data can be used for integrated exposure assessment, in conjunction with diet and environmental (dust and soil) exposure data. (C) 2016 Elsevier Ltd. All rights reserved.
ISSN: 0160-4120

hal-01390976
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01390976
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01390976/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01390976/file/Le%20Bot%202016%20EI%20revision1%20.pdf
DOI : 10.1016/j.envint.2016.06.009

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD American Physical Society (APS)
Résumé : International audience
Diffusion in natural and engineered media is quantified in terms of stochastic models for the heterogeneity-induced fluctuations of particle motion. However, fundamental properties such as ergodicity and self-averaging and their dependence on the disorder distribution are often not known. Here, we investigate these questions for diffusion in quenched disordered media characterized by spatially varying retardation properties, which account for particle retention due to physical or chemical interactions with the medium. We link self-averaging and ergodicity to the disorder sampling efficiency Rn, which quantifies the number of disorder realizations a noise ensemble may sample in a single disorder realization. Diffusion for disorder scenarios characterized by a finite mean transition time is ergodic and self-averaging for any dimension. The strength of the sample to sample fluctuations decreases with increasing spatial dimension. For an infinite mean transition time, particle motion is weakly ergodicity breaking in any dimension because single particles cannot sample the heterogeneity spectrum in finite time. However, even though the noise ensemble is not representative of the single-particle time statistics, subdiffusive motion in q≥2 dimensions is self-averaging, which means that the noise ensemble in a single realization samples a representative part of the heterogeneity spectrum.
ISSN: 2470-0053

hal-01622668
https://hal.archives-ouvertes.fr/hal-01622668
https://hal.archives-ouvertes.fr/hal-01622668v2/document
https://hal.archives-ouvertes.fr/hal-01622668/file/russian2017.pdf
DOI : 10.1103/PhysRevE.96.022156

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The active collision zone around Taiwan orogen receives a variety of sedimentary inputs, including terrigenous flux from Taiwan and Chinese rivers, oceanic currents and atmospheric dust. In order to determine the present-day respective contributions of these different sources, we analysed the Pb and Sr isotopic compositions of late Quaternary sediments accumulated offshore east Taiwan. Samples from the Taiwan Coastal Range (andesites, sandstones, conglomerate and Peinan River terraces and suspended loads) have also been analysed to constrain the mean Taiwan isotopic signature. Mixing lines between the different sources of material indicate that the core located in the Okinawa Trough represents a mixture of about 60% of Taiwan, 30% of Chinese Loess and 10% of Yangtze River contributions. The southernmost core, located close to Luzon Are, is influenced by Taiwan (60%) and volcanic material (40%). The Sr and Pb isotopic compositions of samples cored in the Manila Trench and in the Huatung Basin are strongly influenced by the Taiwan signature, while the Ryukyu Trench core samples point to significant but variable contributions of Chinese Loess and Yangtze River. This work also reports Zn isotopic variations in the silicate fraction of these marine core samples. The overall variation in Zn isotopic compositions (expressed as 666 Zn) is greater than 0.3 per mil (parts per thousand) for an analytical precision of +/- 0.05 parts per thousand. The Zn isotopic signal for most of the marine core samples is similar to the literature data measured on sedimentary material, except for the Manila Trench core samples and the older sample from the Huatung Basin: they present values heavier by 0.2-0.3 parts per thousand, close to those obtained on all Taiwan rocks and Peinan River particulates. These results show: 1- the particular characteristics of Taiwan Zn isotopic compositions on a large scale; and: 2- the possible use of Zn isotopes as a tracer of material sources.
ISSN: 0009-2541

hal-00412214
https://hal.archives-ouvertes.fr/hal-00412214
DOI : 10.1016/j.chemgeo.2007.10.024

Éditeur(s) : Université de la Réunion
Résumé : The green turtle (Chelonia mydas) is an emblematic species of marine life. However, nowadays it is subject to many threats (poaching, by-catch). Even if there is deep growing measures for its protection, the green turtle still is an endangered species and it is listed in Appendix I of Washington Convention (CITES). In order to elaborate efficient conservation and management plans, perfect knowledge of green turtle biology, but also of its population structure and their characteristics, are needed. In this thesis, we have assessed genetic structure of green turtle populations in the South-Western Indian Ocean by using genetic tools. In all, 1551 tissue samples have been collected from our study zone and from our control site French Polynesia (37 samples). All kinds if individuals were sampled (except males in reproductive phase) from 15 sampling sites including nesting, foraging, and immature development site. We used both control region of mitochondrial DNA and 6 microsatellite loci to better infer maternal and paternal lineages. We identified 29 haplotypes in the South-Western Indian Ocean. They are distributed in 3 independent and highly divergent clades, including one composed with haplotypes from Atlantic Ocean. For 7 of these haplotypes, it was the first time they were detected in the study zone. Fifteen haplotypes were previously undescribed, distributed in all the 3 clades. These new haplotypes seem to be specific to the South-Western Indian Ocean, which is then an original zone. Besides, we found a high allelic richness. These results show the South-western Indian Ocean is rich and very diversified. This region plays an important role in the global diversity of the species. The South-Western Indian Ocean is one of the two contact zones presently known between the two metapopulations of green turtles (Atlantic-Mediterranean and Indo-Pacific). This contact induces a genetic cline based on CM8 (Atlantic) and C3 (Indo-Pacific) haplotype frequencies. Analysis of the microsatellite differentiation between individuals provides evidence of genetic exchanges between the two metapopulations in the region. The South-Western Indian Ocean participates to green turtle global genetic mixing. Studying the influence of several intrinsic and extrinsic factors on population structuring provides useful information for management plan elaboration. We found no significant difference between genetic structures of foraging females and males, contrary to immature turtles which seem to be organised in 'regional pools'. This organisation could be due to both immature natal homing and influence of oceanic currents. High mitochondrial differentiation of nesting females and low global microsatellite differentiation of our samples indicate male-mediated gene flow among populations of the study zone. The genetic composition of a sampling site presents no significant variation along the year, even if we could notice some trends. Nevertheless, it can be significantly different from a year to an other one. This may result from alternation of distinct populations on the same site. We noticed different evolution in 10 or 20 years of the genetic composition depending on the sampling site. Geographic distance seems not to have significant influence on population structuring concerning microsatellite markers. Nesting females of Saziley Beach (Mayotte Island, Comoros Archipelago) present genetic divergence from females nesting in the two other sampled beaches of this island. The observed population structure shows no contradiction with the organisation of oceanic currents in the South-Western Indian Ocean. Comparing the results from the two genetic markers used, we identified 8 genetic differentiated clusters of turtles in the study zone and at least 6 distinct populations. These clusters constitute 8 potential management units (MUs) which could serve as basis in the elaboration of conservation and management plans.
La tortue verte (Chelonia mydas) constitue l'un des espèces emblématiques de la vie marine, pourtant de nombreuses menaces pèsent de nos jours encore sur sa survie (braconnage, captures accidentelles). Ainsi, malgré l'essor de mesures de protection menées à travers pour sa sauvegarde, la tortue verte constitue une espèce 'en danger d'extinction' et figure dans l'Annexe I de la Convention de Washington (CITES). Afin d'élaborer des plans de gestion et de conservation qui soient efficaces, il est important d'avoir une parfaite connaissance de la biologie de la tortue verte, mais aussi de la structure de ses populations et de leurs caractéristiques. C'est dans ce cadre que s'inscrit la présente étude. L'objectif de cette étude était d'acquérir des connaissances sur la structure des populations de tortues vertes dans le sud-ouest de l'océan Indien grâce à l'utilisation de l'outil génétique. Au total, 1551 échantillons de tissu ont été collectés dans la zone d'étude et dans notre site témoin la Polynésie française (37 échantillons). Toutes les catégories d'individus ont été échantillonnées (excepté les mâles en phase de reproduction) et les 15 sites d'échantillonnage comprennent à la fois des sites de ponte, d'alimentation et de développement pour les immatures. Deux types de marqueurs ont été utilisés : la région contrôle de l'ADN mitochondrial et 6 loci microsatellites, afin d'appréhender au mieux l'apport des lignées maternelles et paternelles. Nous avons pu mettre en évidence la présence dans le sud-ouest de l'océan Indien de 29 haplotypes distincts, appartenant à trois clades fortement divergents dont l'un constitué d'haplotypes originaires de l'océan Atlantique. Parmi ces haplotypes, 7 ont été détectés pour la première fois dans la zone d'étude, et 15 autres n'ont jamais été précédemment décrits chez cette espèce. Ils sont présents dans chacun des 3 clades d'haplotypes. Ces nouveaux haplotypes semblent spécifiques à la région, et en font une zone originale. On observe par ailleurs une grande richesse allélique dans les effectifs analysés. Ces résultats montrent que le sud-ouest de l'océan Indien est une zone riche et très diversifiée. Cette région joue un rôle important dans la diversité génétique globale de l'espèce. Le sud-ouest de l'océan Indien constitue l'une des deux seules zones connues à l'heure actuelle de contact entre les deux métapopulations de tortues vertes (Atlantique-Méditerranée et Indo-Pacifique). Ce contact a entraîné la formation d'un cline génétique portant principalement sur les fréquences relatives des haplotypes CM8 (Atlantique) et C3 (Indo-Pacifique). Les résultats obtenus lors de l'analyse microsatellite de la différenciation entre les individus originaires des deux métapopulations montrent que le sud-ouest de l'océan Indien constitue une zone d'échanges génétiques entre les deux métapopulations, participant au brasage génétique de l'espèce. L'étude de facteurs, intrinsèques et extrinsèques, pouvant influencer la structuration des populations apportent de nombreuses informations qui pourraient s'avérer utiles lors de l'élaboration de plans de gestion. La structure des femelles et des mâles en alimentation ne diffère pas, contrairement à celle des immatures qui semble s'organiser en 'pools régionaux' qui seraient le fruit de l'interaction d'un comportement de philopatrie et d'une influence des courants océaniques. La forte différenciation mitochondriale des femelles en ponte et la très faible différenciation microsatellite observée à l'échelle de la région, indiquent l'existence de flux de gènes via les mâles. La composition génétique d'un site ne varie pas de manière significative au cours de l'année. Par contre, elle peut varier d'une année à l'autre, signifiant l'alternance dans certains sites de ponte de plusieurs populations distinctes. L'évolution de la composition génétique d'un groupe, au cours de 10 ou 20 ans, diffère selon le site considéré. La distance ne semble pas influencer de manière significative la structuration des populations au niveau microsatellite. Les femelles en ponte sur la plage de Saziley (Mayotte) diffèrent génétiquement de celles pondant sur les deux autres plages de l'île. La structure observée des populations est en accord avec l'organisation des courants océanique dans la région. La confrontation des résultats obtenus à partir des deux marqueurs génétiques utilisés, permet la détermination de 8 ensembles génétiquement différenciés dans la zone d'étude et l'identification d'au moins 6 populations distinctes. Ces ensembles constituent autant d'unités de gestion (MUs) potentielles qui pourront servir de base à l'élaboration de plans de gestion et de conservation.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2007/these-3532.pdf
http://archimer.ifremer.fr/doc/00000/3532/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A series of two-stage torsion experiments on Carrara marble were conducted to constrain the influence of known prior deformation on rheological response and microstructural evolution. Comparison with previous experimental data on Carrara marble flow and fabric evolution during single-stage torsion deformation experiments provided direct insights into the significance of initial deformation at various conditions. Our experiments were conducted at 727 degrees C temperature and 300 MPa confining pressure, while maintaining a constant strain rate of 3 x 10(-4) s(-1) on the periphery of the cylindrical samples. Under these conditions, the marble is known to deform in power-law (n = 6-10) ductile flow. All torsion experiments were performed with a Paterson type gas-medium testing machine equipped with a torsion actuator module.;Prior (D1) and subsequent (D2) deformation are accomplished by two torsion experiments in sequence on same sample segments. The effect of D1 strain history is investigated during D2 by applying counter-clockwise torsion to a sandwich sample consisting of three segments with different D1 rotation sense. D2 samples experienced continued, first and reversed shearing deformation in top, centre and bottom segments, respectively. D2 bulk strain was chosen equal to D1 strain in top and bottom segments.;D1 experiments followed the typical single-stage deformation behaviour of Carrara marble under the applied experimental conditions. Yielding was followed by strain hardening until a peak stress was reached at a shear strain around 1, after which work softening occurred. Weakening gradually evolved into a constant stress regime. During hardening, a shear microstructure and crystallographic preferred orientation (CPO) developed. Afterwards the volume fraction of smaller dynamic recrystallised grains increased continuously, resulting in a recrystallisation microstructure and CPO at shear strains of 5 and higher. The new D2 experiments displayed a strain variation between homogeneously deformed sample segments that increased with increasing D1 strain. The stress-strain behaviour of the D2 bulk sandwich samples showed less pronounced work-hardening and -softening when compared with single-stage deformation experiments. Furthermore, constant flow stress was attained at increasingly lower strain with increasing D1 strain. In most D2 segments, fabric development is equivalent to single-stage experiments at corresponding absolute strain. The fabrics differed markedly from those in single-stage experiments in the case of reversed two-stage deformation at moderate strain (D1 shear strain 1 and 2.6). Experiments show that grain shape by shearing of relict grains is defined by finite strain and thus affected by strain reversal. Recrystallisation is controlled by absolute strain and not influenced by strain reversal.
ISSN: 0040-1951

hal-00617686
https://hal.archives-ouvertes.fr/hal-00617686
DOI : 10.1016/j.tecto.2010.09.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A detailed rock-magnetic and archeointensity study was carried out on materials baked by a western Mexican artisan following traditional techniques to produce faithful reproductions of archeological pieces of the Michoacan region (Western Mesoamerica). The field strength at the site (41.0 +/- 0.51 mu T) was measured with a fluxgate magnetometer and the temperature of the furnace during the baking process was monitored continually by means of a thermocouple placed in the middle of the baking cavity.;Rock-magnetic experiments performed on the raw material (clay and paste) and on in situ prepared baked ceramics and bricks included measurement of thermomagnetic curves (susceptibility and strong-field magnetization versus temperature), first-order reversal curves (FORC), anisotropy of magnetic susceptibility (AMS) and anisotropy of thermoremanent magnetization (A-TRM). Magnetite and probably hematite are present in the samples as carriers of the remanence. Hysteresis ratios suggest that the samples fall in the pseudo-single-domain grain size region, which may indicate a mixture of multidomain and a significant amount of single-domain grains.;Ceramic pieces and brick fragments were subjected to the Thellier-Coe archeointensity method and to an alternative paleointensity experiment, with a TRIAXE magnetometer, in order to check whether they are faithful recorders of the local geomagnetic field strength.;Mean raw-intensity of sample M1 (pottery) overestimates a 7% the expected site intensity, while those corresponding to the brick samples (LQ1 and LQ2) underestimate it 15%. Brick sample LNQ shows a slightly lower intensity (7%), but agrees with the expected site intensity within the experimental uncertainty. The intensity retrieved from the volcanic fragment also included closely reproduces the expected intensity. After A-TRM and cooling-rate corrections, all mean raw values move closer to the expected intensity.;Measurement of temperatures at different parts inside the kiln (bottom and upper parts of both central and peripheral parts) revealed the existence of significant thermal gradients, similar to those observed in ovens from other localities. Different cooling rates are then expected in a single oven.;The scatter in the intensity determinations observed in this study, retrieved from pieces elaborated together in the same oven, could arise from this differentiated cooling rate within the oven and thus, to an inappropriate cooling rate correction in the archeointensity protocol. As this situation was probably reproduced in the baking of ancient ceramic artifacts, a better knowledge of the temperature distribution inside these types of kiln would be desirable in order to choose the appropriate cooling rate correction.
ISSN: 0031-9201

hal-00644559
https://hal.archives-ouvertes.fr/hal-00644559
DOI : 10.1016/j.pepi.2011.06.007

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. Despite considerable interest in the application of plant functional traits to questions of community assembly and ecosystem structure and function, there is no consensus on the appropriateness of sampling designs to obtain plot-level estimates in diverse plant communities. 2. We measured 10 plant functional traits describing leaf and stem morphology and ecophysiology for all trees in nine 1-ha plots in terra firme lowland tropical rain forests of French Guiana (N = 4709). 3.We calculated, by simulation, the mean and variance in trait values for each plot and each trait expected under seven sampling methods and a range of sampling intensities. Simulated sampling methods included a variety of spatial designs, as well as the application of existing data base values to all individuals of a given species. 4. For each trait in each plot, we defined a performance index for each sampling design as the proportion of resampling events that resulted in observed means within 5% of the true plot mean, and observed variance within 20%of the true plot variance. 5. The relative performance of sampling designs was consistent for estimations of means and variances. Data base use had consistently poor performance for most traits across all plots, whereas sampling one individual per species per plot resulted in relatively high performance. We found few differences among different spatial sampling strategies; however, for a given strategy, increased intensity of sampling resulted in markedly improved accuracy in estimates of trait mean and variance. 6. We also calculated the financial cost of each sampling design based on data from our 'every individual per plot' strategy and estimated the sampling and botanical effort required. The relative performance of designs was strongly positively correlated with relative financial cost, suggesting that sampling investment returns are relatively constant. 7. Our results suggest that trait sampling for many objectives in species-rich plant communities may require the considerable effort of sampling at least one individual of each species in each plot, and that investment in complete sampling, though great, may be worthwhile for at least some traits.
ISSN: 0269-8463

hal-00594009
https://hal.archives-ouvertes.fr/hal-00594009

Éditeur(s) : Public Library Science
Résumé : Estimating diversity and abundance of fish species is fundamental for understanding community structure and dynamics of coral reefs. When designing a sampling protocol, one crucial step is the choice of the most suitable sampling technique which is a compromise between the questions addressed, the available means and the precision required. The objective of this study is to compare the ability to sample reef fish communities at the same locations using two techniques based on the same stationary point count method: one using Underwater Visual Census (UVC) and the other rotating video (STAVIRO). UVC and STAVIRO observations were carried out on the exact same 26 points on the reef slope of an intermediate reef and the associated inner barrier reefs. STAVIRO systems were always deployed 30 min to 1 hour after UVC and set exactly at the same place. Our study shows that; (i) fish community observations by UVC and STAVIRO differed significantly; (ii) species richness and density of large species were not significantly different between techniques; (iii) species richness and density of small species were higher for UVC; (iv) density of fished species was higher for STAVIRO and (v) only UVC detected significant differences in fish assemblage structure across reef type at the spatial scale studied. We recommend that the two techniques should be used in a complementary way to survey a large area within a short period of time. UVC may census reef fish within complex habitats or in very shallow areas such as reef flat whereas STAVIRO would enable carrying out a large number of stations focused on large and diver-averse species, particularly in the areas not covered by UVC due to time and depth constraints. This methodology would considerably increase the spatial coverage and replication level of fish monitoring surveys.
Plos One (1932-6203) (Public Library Science), 2014-01 , Vol. 9 , N. 1 , P. -

Droits : 2014 Mallet et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
http://archimer.ifremer.fr/doc/00170/28132/26352.pdf
DOI:10.1371/journal.pone.0084344
http://archimer.ifremer.fr/doc/00170/28132/

Éditeur(s) : Public Library Science
Résumé : Background: The Astrophorida (Porifera, Demospongiae(rho)) is geographically and bathymetrically widely distributed. Systema Porifera currently includes five families in this order: Ancorinidae, Calthropellidae, Geodiidae, Pachastrellidae and Thrombidae. To date, molecular phylogenetic studies including Astrophorida species are scarce and offer limited sampling. Phylogenetic relationships within this order are therefore for the most part unknown and hypotheses based on morphology largely untested. Astrophorida taxa have very diverse spicule sets that make them a model of choice to investigate spicule evolution. Methodology/Principal Findings: With a sampling of 153 specimens (9 families, 29 genera, 89 species) covering the deep- and shallow-waters worldwide, this work presents the first comprehensive molecular phylogeny of the Astrophorida, using a cytochrome c oxidase subunit I (COI) gene partial sequence and the 59 end terminal part of the 28S rDNA gene (C1-D2 domains). The resulting tree suggested that i) the Astrophorida included some lithistid families and some Alectonidae species, ii) the sub-orders Euastrophorida and Streptosclerophorida were both polyphyletic, iii) the Geodiidae, the Ancorinidae and the Pachastrellidae were not monophyletic, iv) the Calthropellidae was part of the Geodiidae clade (Calthropella at least), and finally that v) many genera were polyphyletic (Ecionemia, Erylus, Poecillastra, Penares, Rhabdastrella, Stelletta and Vulcanella). Conclusion: The Astrophorida is a larger order than previously considered, comprising ca. 820 species. Based on these results, we propose new classifications for the Astrophorida using both the classical rank-based nomenclature (i.e., Linnaean classification) and the phylogenetic nomenclature following the PhyloCode, independent of taxonomic rank. A key to the Astrophorida families, sub-families and genera incertae sedis is also included. Incongruences between our molecular tree and the current classification can be explained by the banality of convergent evolution and secondary loss in spicule evolution. These processes have taken place many times, in all the major clades, for megascleres and microscleres.
Plos One (1932-6203) (Public Library Science), 2011-04 , Vol. 6 , N. 4 , P. -

Droits : 2011 Ca´rdenas et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
http://archimer.ifremer.fr/doc/00137/24817/22903.pdf
DOI:10.1371/journal.pone.0018318
http://archimer.ifremer.fr/doc/00137/24817/