Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The paper presents coastal structures design in the presence of waves by the minimization of a cost function. It aims to show that shape optimization can be efficiently applied to ocean engineering. This is an underlying guiding principle for the design of harbors or offshore breakwaters. We compute the solution of a specific simplified boundary value problem describing the short wave propagation toward a vertical sea cliff or vertical wall and modify accordingly the shape of defense structures in order to minimize a pre-defined cost function taking into account the strength (energy) of the water waves. The optimization procedure relies on a global semi-deterministic search algorithm able to escape from local minima.
ISSN: 0378-3839

hal-00411905
https://hal.archives-ouvertes.fr/hal-00411905
DOI : 10.1016/j.coastaleng.2007.06.006

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : This paper presents an inversion method using the interseismic velocity field to determine effective rigidity of the lithosphere. The method is based on the minimization of a cost function defined as the quadratic measure of the difference between measured and modelled velocity fields on a discrete set of points. The continuous mapping of the rigidity is fulfilled with a limited set of parameters and the forward solution is achieved using a plane stress finite element code. The computation of the cost function gradient in the parameters' space allows one to iteratively find the best parameters set through a suitable optimization algorithm.;We first design a benchmark including an abrupt rigidity variation that cannot be described by a continuous function. For such a case, we show that increasing the number of parameters is a way to accurately describe sharp variations of the rigidity map. Then, we use a dense GPS velocity field over the southwestern United States to estimate the corresponding rigidity variations for different spatial resolutions of the parameters' grid. We analyse the conceptual and practical difficulties associated with our methodology. Finally, rigidity maps obtained by our inversion method in southwestern United States and particularly across the San Andreas Fault System are reviewed and compared to current plate rigidity estimates and geophysical data over this area.
ISSN: 0956-540X

hal-00669897
https://hal.archives-ouvertes.fr/hal-00669897
DOI : 10.1111/j.1365-246X.2011.05192.x

Éditeur(s) : HAL CCSD Society for Molecular Biology and Evolution
Résumé : International audience
Microsatellites (SSRs) are highly susceptible to expansions and contractions. When located in a coding sequence, the insertion or the deletion of a single unit for a mono-, di-, tetra-, or penta(nucleotide)-SSR creates a frameshift. As a consequence, one would expect to find only very few of these SSRs in coding sequences because of their strong deleterious potential. Unexpectedly, genomes contain many coding SSRs of all types. Here, we report on a study of their evolution in a phylogenetic context using the genomes of four primates: human, chimpanzee, orangutan, and macaque. In a set of 5,015 orthologous genes unambiguously aligned among the four species, we show that, except for tri- and hexa-SSRs, for which insertions and deletions are frequently observed, SSRs in coding regions evolve mainly by substitutions. We show that the rate of substitution in all types of coding SSRs is typically two times higher than in the rest of coding sequences. Additionally, we observe that although numerous coding SSRs are created and lost by substitutions in the lineages, their numbers remain constant. This last observation suggests that the coding SSRs have reached equilibrium. We hypothesize that this equilibrium involves a combination of mutation, drift, and selection. We thus estimated the fitness cost of mono-SSRs and show that it increases with the number of units. We finally show that the cost of coding mono-SSRs greatly varies from function to function, suggesting that the strength of the selection that acts against them can be correlated to gene functions.
ISSN: 1759-6653

hal-01544762
https://hal.archives-ouvertes.fr/hal-01544762
DOI : 10.1093/gbe/evt003

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
Background: We used evolutionary analysis of alkaline phosphatase (tissue nonspecific alkaline phosphatase, TNSALP) to predict missense mutations leading to hypophosphatasia. Results: We found 469 sensitive positions and validated 99% of the 204 known mutations. Conclusion: It is a more powerful method than in silico models to validate missense mutations in TNSALP. Significance: Such an approach should be widely used to support genetic diagnostics. ALPL encodes the tissue nonspecific alkaline phosphatase (TNSALP), which removes phosphate groups from various substrates. Its function is essential for bone and tooth mineralization. In humans, ALPL mutations lead to hypophosphatasia, a genetic disorder characterized by defective bone and/or tooth mineralization. To date, 275 ALPL mutations have been reported to cause hypophosphatasia, of which 204 were simple missense mutations. Molecular evolutionary analysis has proved to be an efficient method to highlight residues important for the protein function and to predict or validate sensitive positions for genetic disease. Here we analyzed 58 mammalian TNSALP to identify amino acids unchanged, or only substituted by residues sharing similar properties, through 220 millions years of mammalian evolution. We found 469 sensitive positions of the 524 residues of human TNSALP, which indicates a highly constrained protein. Any substitution occurring at one of these positions is predicted to lead to hypophosphatasia. We tested the 204 missense mutations resulting in hypophosphatasia against our predictive chart, and validated 99% of them. Most sensitive positions were located in functionally important regions of TNSALP (active site, homodimeric interface, crown domain, calcium site, ...). However, some important positions are located in regions, the structure and/or biological function of which are still unknown. Our chart of sensitive positions in human TNSALP (i) enables to validate or invalidate at low cost any ALPL mutation, which would be suspected to be responsible for hypophosphatasia, by contrast with time consuming and expensive functional tests, and (ii) displays higher predictive power than in silico models of prediction.
ISSN: 0021-9258

hal-01545479
https://hal.archives-ouvertes.fr/hal-01545479
DOI : 10.1074/jbc.M114.576843

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The maintenance in the long run of a positive carbon balance under very low irradiance is a prerequisite for survival of tree seedlings below the canopy or in small gaps in a tropical rainforest. To provide a quantitative basis for this assumption, experiments were carried out to determine whether construction cost (CC) and payback time for leaves and support structures, as well as leaf life span (i) differ among species and (ii) display an irradiance-elicited plasticity. Experiments were also conducted to determine whether leaf life span correlates to CC and payback time and is close to the optimal longevity derived from an optimization model. Saplings from 13 tropical tree species were grown under three levels of irradiance. Specific-CC was computed, as well as CC scaled to leaf area at the metamer level. Photosynthesis was recorded over the leaf life span. Payback time was derived from CC and a simple photosynthesis model. Specific-CC displayed only little interspecific variability and irradiance-elicited plasticity, in contrast to CC scaled to leaf area. Leaf life span ranged from 4 months to >26 months among species, and was longest in seedlings grown under lowest irradiance. It was always much longer than payback time, even under the lowest irradiance. Leaves were shed when their photosynthesis had reached very low values, in contrast to what was predicted by an optimality model. The species ranking for the different traits was stable across irradiance treatments. The two pioneer species always displayed the smallest CC, leaf life span, and payback time. All species displayed a similar large irradiance-elicited plasticity.
ISSN: 1631-0691

hal-01095975
https://hal-agroparistech.archives-ouvertes.fr/hal-01095975
DOI : 10.1016/j.crvi.2011.01.007

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. Despite considerable interest in the application of plant functional traits to questions of community assembly and ecosystem structure and function, there is no consensus on the appropriateness of sampling designs to obtain plot-level estimates in diverse plant communities. 2. We measured 10 plant functional traits describing leaf and stem morphology and ecophysiology for all trees in nine 1-ha plots in terra firme lowland tropical rain forests of French Guiana (N = 4709). 3.We calculated, by simulation, the mean and variance in trait values for each plot and each trait expected under seven sampling methods and a range of sampling intensities. Simulated sampling methods included a variety of spatial designs, as well as the application of existing data base values to all individuals of a given species. 4. For each trait in each plot, we defined a performance index for each sampling design as the proportion of resampling events that resulted in observed means within 5% of the true plot mean, and observed variance within 20%of the true plot variance. 5. The relative performance of sampling designs was consistent for estimations of means and variances. Data base use had consistently poor performance for most traits across all plots, whereas sampling one individual per species per plot resulted in relatively high performance. We found few differences among different spatial sampling strategies; however, for a given strategy, increased intensity of sampling resulted in markedly improved accuracy in estimates of trait mean and variance. 6. We also calculated the financial cost of each sampling design based on data from our 'every individual per plot' strategy and estimated the sampling and botanical effort required. The relative performance of designs was strongly positively correlated with relative financial cost, suggesting that sampling investment returns are relatively constant. 7. Our results suggest that trait sampling for many objectives in species-rich plant communities may require the considerable effort of sampling at least one individual of each species in each plot, and that investment in complete sampling, though great, may be worthwhile for at least some traits.
ISSN: 0269-8463

hal-00594009
https://hal.archives-ouvertes.fr/hal-00594009

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Cross-species analyses of plant functional traits have shed light on factors contributing to differences in performance and distribution, but to date most studies have focused on either leaves or stems. We extend these tissue-specific analyses of functional strategy towards a whole-plant approach by integrating data on functional traits for 13 448 leaves and wood tissues from 4672 trees representing 668 species of Neotropical trees. Strong correlations amongst traits previously defined as the leaf economics spectrum reflect a tradeoff between investments in productive leaves with rapid turnover vs. costly physical leaf structure with a long revenue stream. A second axis of variation, the 'stem economics spectrum', defines a similar tradeoff at the stem level: dense wood vs. high wood water content and thick bark. Most importantly, these two axes are orthogonal, suggesting that tradeoffs operate independently at the leaf and at the stem levels. By simplifying the multivariate ecological strategies of tropical trees into positions along these two spectra, our results provide a basis to improve global vegetation models predicting responses of tropical forests to global change.
ISSN: 1461-023X

hal-00594040
https://hal.archives-ouvertes.fr/hal-00594040

Éditeur(s) : HAL CCSD
Résumé : One of the major challenges in forest ecology is to understand the ecology, physiology and potential responses of the> 250000 species of vascular plants of the planet through the categorization of this diversity into functional groups. This approach is essentially based on functional traits analysis, but few investigations were made in tropical areas. The aim of this study was to determine functional groups in two contrasted tropical ecosystems, dry (DF) and mountain rain (MRF) forest (respectively rainfall of 1 200 mm/year and 10 000 mm/year). Guadeloupe Island in FWI presents both these ecosystems spread over less 100 km. In a first time, we developed an original species typology based on 7 "soft" traits, easy to measure (stomatal density, leaf trichom density, chlorophyll content, leaf nitrogen content, specific leaf area, wood density, leaf area, plant height). The method was based on principal component analysis (PCA) and agglomerative hierarchical clustering (AHC) applied to these traits measured at the individual level (Blazy et al., 2009). In a second time, we evaluated the relevance of these soft trait-based groups compared to a typology based on 5 "hard" ecophysiological traits, more costly to quantify but with higher functional significance (difference between predawn and minimum leaf water potential, stomatal conductance, maximal carbon assimilation rate, leaf water potential at 90% of loss of stem hydraulic conductivity). When performed on the dominant canopy species in DF and MRF (a total of 13 species and 60 mature individuals), the typological approach based on soft traits seems relevant to discriminate groups with a distinct functional reality. Through both ecosystems, we obtained 4 homogenous groups. Two were exclusively composed by DF's or MRF's species, indicating that a functional strategy can be linked to specific environmental conditions. The two other groups showed a mix of DF and MRF species indicating that different functional strategies can coexist in the same environment. These mixed groups seem distinct by their ecophysiological features, particularly in term of hydraulic characteristics. One group was composed by drought tolerant species, water spender species, with a high xylem embolism resistance, whereas the second one was composed by water saver species, less resistant to embolism. Therefore, a determination of functional groups based on soft traits could be useful to model ecosystem's responses to environmental changes on a global scale.
Book of Abstracts - isem 2013 - Ecological Modelling for Ecosystem Sustainability
Toulouse, France

hal-00964668
https://hal.archives-ouvertes.fr/hal-00964668

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Abstract View references (38)Silicalite-1 (S-1) and ZSM-5 membranes prepared by secondary growth on tubular ceramic supports were tested using a pervaporation set up for the desalination of aqueous solutions containing NaCl in concentrations corresponding to brackish (0.3-1wt%), sea (3.5wt%) and brine (7.5-15wt%) water. ZSM-5 membranes delivered higher water fluxes when compared with S-1 membranes due to enhanced hydrophilicity of the Al-rich zeolite structure leading to fluxes as high as 11.5kgm -2h -1 for 0.3wt% NaCl feed solutions at 75°C. At higher salt concentration the water flux decreased alongside with the salt rejection rate, however the hydrophilic ZMS-5 membrane became more susceptible to performance loss, particularly at high temperatures. Detailed stability experiments carried out for up to 560h showed the dissolution of both S-1 and ZSM-5 top layers. This was attributed to the combined effects of ion exchange and water dissolution mechanisms. Interesting though, the MFI structure zeolite was still observed on the XRD patterns whilst EDX depth profile showed the presence of silica up to 30μm depth into the support. These results suggest the formation/infiltration of a compact amorphous phase in the substrate, derived from the aggregation of the dissolved silicate species and possibly together with the arrangement of MFI nano-slabs during the desalination tests. Despite generating lower water fluxes, the S-1 membrane exhibited relatively high robustness under the long term testing conditions which included temperature cycling, delivering salt rejections from initial >99% to <80% at the end of the testing period (560h). © 2012 Elsevier B.V.
ISSN: 0376-7388

hal-01683201
https://hal.univ-antilles.fr/hal-01683201
DOI : 10.1016/j.memsci.2012.05.074

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé :  
1. Despite considerable interest in the application of plant functional traits to questions of community assembly and ecosystem structure and function, there is no consensus on the appropriateness of sampling designs to obtain plot-level estimates in diverse plant communities. 2. We measured 10 plant functional traits describing leaf and stem morphology and ecophysiology for all trees in nine 1-ha plots in terra firme lowland tropical rain forests of French Guiana (N = 4709). 3.We calculated, by simulation, the mean and variance in trait values for each plot and each trait expected under seven sampling methods and a range of sampling intensities. Simulated sampling methods included a variety of spatial designs, as well as the application of existing data base values to all individuals of a given species. 4. For each trait in each plot, we defined a performance index for each sampling design as the proportion of resampling events that resulted in observed means within 5% of the true plot mean, and observed variance within 20%of the true plot variance. 5. The relative performance of sampling designs was consistent for estimations of means and variances. Data base use had consistently poor performance for most traits across all plots, whereas sampling one individual per species per plot resulted in relatively high performance. We found few differences among different spatial sampling strategies; however, for a given strategy, increased intensity of sampling resulted in markedly improved accuracy in estimates of trait mean and variance. 6. We also calculated the financial cost of each sampling design based on data from our 'every individual per plot' strategy and estimated the sampling and botanical effort required. The relative performance of designs was strongly positively correlated with relative financial cost, suggesting that sampling investment returns are relatively constant. 7. Our results suggest that trait sampling for many objectives in species-rich plant communities may require the considerable effort of sampling at least one individual of each species in each plot, and that investment in complete sampling, though great, may be worthwhile for at least some traits.
Functional Ecology

hal-01032175
https://hal.archives-ouvertes.fr/hal-01032175
DOI : 10.1111/j.1365-2435.2009.01600.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé :  
The maintenance in the long run of a positive carbon balance under very low irradiance is a prerequisite for survival of tree seedlings below the canopy or in small gaps in a tropical rainforest. To provide a quantitative basis for this assumption, experiments were carried out to determine whether construction cost (CC) and payback time for leaves and support structures, as well as leaf life span (i) differ among species and (ii) display an irradiance-elicited plasticity. Experiments were also conducted to determine whether leaf life span correlates to CC and payback time and is close to the optimal longevity derived from an optimization model. Saplings from 13 tropical tree species were grown under three levels of irradiance. Specific-CC was computed, as well as CC scaled to leaf area at the metamer level. Photosynthesis was recorded over the leaf life span. Payback time was derived from CC and a simple photosynthesis model. Specific-CC displayed only little interspecific variability and irradiance-elicited plasticity, in contrast to CC scaled to leaf area. Leaf life span ranged from 4 months to >26 months among species, and was longest in seedlings grown under lowest irradiance. It was always much longer than payback time, even under the lowest irradiance. Leaves were shed when their photosynthesis had reached very low values, in contrast to what was predicted by an optimality model. The species ranking for the different traits was stable across irradiance treatments. The two pioneer species always displayed the smallest CC, leaf life span, and payback time. All species displayed a similar large irradiance-elicited plasticity.
ISSN: 0022-0957

hal-01032198
https://hal.archives-ouvertes.fr/hal-01032198
DOI : 10.1093/jxb/err092

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Functional ecology has long considered the support function as important, but its biomechanical complexity is only just being elucidated. We show here that it can be described on the basis of four biomechanical traits, two safety traits against winds (SW) and self-buckling (SB), and two motricity traits involved in sustaining an upright position, tropic motion velocity (MV) and posture control (PC). All these traits are integrated at the tree scale, combining tree size and shape together with wood properties. The assumption of trait constancy has been used to derive allometric scaling laws, but it was more recently found that observing their variations among environments and functional groups, or during ontogeny, provides more insights into adaptive syndromes of tree shape and wood properties. However, over-simplified expressions have often been used, possibly concealing key adaptive drivers. An extreme case of over-simplification is the use of wood basic density as a proxy for safety. Actually, since wood density is involved in stiffness, loads and construction costs, the impact of its variations on safety is non-trivial. Moreover, other wood features, especially the microfibril angle (MFA), are also involved. Furthermore, wood is not only stiff and strong, but it also acts as a motor for MV and PC. The relevant wood trait for that is maturation strain asymmetry. Maturation strains vary with cell wall characteristics such as MFA, rather than with wood density. Finally, the need for further studies about the ecological relevance of branching patterns, motricity traits and growth responses to mechanical loads is discussed.
ISSN: 0022-0957

hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904/document
https://hal.archives-ouvertes.fr/hal-00909904/file/Integrative_biomechanics_for_tree_Fournier_al.pdf
DOI : 10.1093/jxb/ert279

Éditeur(s) : HAL CCSD Wiley
Résumé : 1. Functional traits provide insight into a variety of ecological questions, yet the optimal sampling method to estimate the community-level distribution of plant functional trait values remains a subject of debate, especially in species-rich forests. 2. We present a simulation analysis of the trait distribution of a set of nine completely sampled permanent plots in the lowland rain forests of French Guiana. 3. Increased sampling intensity consistently improved accuracy in estimating community-weighted means and variances of functional trait values, whereas there was substantial variation among functional traits and minor differences among sampling strategies. 4. Thus, investment in intensified sampling yields a greater improvement in the accuracy of estimation than does an equivalent investment in sampling design complication. 5. Notably, 'taxon-free' strategies frequently had greater accuracy than did abundance-based strategies, which had the additional cost of requiring botanical surveys. 6. We conclude that there is no substitute for extensive field sampling to accurately characterize the distribution of functional trait values in species-rich forests.
ISSN: 0269-8463

hal-01536541
https://hal.archives-ouvertes.fr/hal-01536541
PRODINRA : 343202
DOI : 10.1111/1365-2435.12433

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé :  
Cross-species analyses of plant functional traits have shed light on factors contributing to differences in performance and distribution, but to date most studies have focused on either leaves or stems. We extend these tissue-specific analyses of functional strategy towards a whole-plant approach by integrating data on functional traits for 13 448 leaves and wood tissues from 4672 trees representing 668 species of Neotropical trees. Strong correlations amongst traits previously defined as the leaf economics spectrum reflect a tradeoff between investments in productive leaves with rapid turnover vs. costly physical leaf structure with a long revenue stream. A second axis of variation, the 'stem economics spectrum', defines a similar tradeoff at the stem level: dense wood vs. high wood water content and thick bark. Most importantly, these two axes are orthogonal, suggesting that tradeoffs operate independently at the leaf and at the stem levels. By simplifying the multivariate ecological strategies of tropical trees into positions along these two spectra, our results provide a basis to improve global vegetation models predicting responses of tropical forests to global change.
Ecology Letters

hal-01032142
https://hal.archives-ouvertes.fr/hal-01032142
DOI : 10.1111/j.1461-0248.2010.01517.x

Éditeur(s) : HAL CCSD Society for Industrial and Applied Mathematics
Résumé : International audience
We discuss the control of distributed systems with incomplete data following the notion of no-regret control (or, equivalently, Pareto control) used by Lions in [C. R. Acad. Sci. Paris Ser. I Math., 302 (1986), pp. 223-227] and [C. R. Acad. Sci. Paris Ser. I Math., 302 (1992), pp. 1253-1257]. We associate with the no-regret control a sequence of low-regret controls defined by a quadratic perturbation previously used by Nakoulima, Omrane, and Velin in [C. R. Acad. Sci. Paris Ser. I Math., 330 (2000), pp. 801-806]. In the first part, we prove that the perturbed system corresponds to a sequence of standard control problems and converges to the no-regret (or Pareto) control for which we obtain a singular optimality system. We give also some applications. In the second part, we show how the method can be extended to the evolution case. Equations of parabolic type, Petrowsky type, or hyperbolic type are considered.
ISSN: 0363-0129

hal-00764259
https://hal.univ-antilles.fr/hal-00764259
https://hal.univ-antilles.fr/hal-00764259/document
https://hal.univ-antilles.fr/hal-00764259/file/38018.pdf
DOI : 10.1137/S0363012900380188

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Genetics and molecular biology have been instrumental for a better understanding of heritable defects causing human infertility over the past decades. More recently, the field of reproductive biology has harnessed genome biological approaches to gain insight into molecular processes underlying normal and pathological gametogenesis and gamete function. We are currently witnessing yet another quantum leap in our ability to monitor the flow of information from the genome via the transcriptome to the proteome: tiling arrays that cover both strands of a given target genome and RNA-Seq, a method based on ultra-high throughput DNA sequencing, enable us to study noncoding and protein-coding transcripts with unprecedented precision and depth at a reasonable cost. These technologies have spawned a thriving discipline within the bioinformatics field that employs information technology for managing and interpreting biological high-throughput data. This review outlines database projects and online analysis tools useful for life scientists in general and discusses in detail selected projects that have specifically been developed for researchers and clinicians in the field of reproductive biology. This article is part of a Special Issue entitled: Molecular Genetics of Human Reproductive Failure.
ISSN: 0006-3002

hal-00877444
https://hal.archives-ouvertes.fr/hal-00877444
DOI : 10.1016/j.bbadis.2012.05.018
PUBMED : 22687534

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Gravitropism is necessary for plants to control the orientation of their axes while they grow in height. In woody plants, stem re-orientations are costly because they are achieved through diameter growth. The functional diversity of gravitropism was studied to check if the mechanisms involved and their efficiency may contribute to the differentiation of height growth strategies between forest tree species at the seedling stage. Seedlings of eight tropical species were grown tilted in a greenhouse, and their up-righting movement and diameter growth were measured during three months. Morphological, anatomical and biomechanical traits were measured at the end of the survey. Curvature analysis was used to analyse the up-righting response along the stems. Variations in stem curvature depend on diameter growth, size effects, the increase in self-weight, and the efficiency of the gravitropic reaction. A biomechanical model was used to separate these contributions. Results showed that (1) gravitropic movements were based on a common mechanism associated to similar dynamic patterns, (2) clear differences in efficiency (defined as the change in curvature achieved during an elementary diameter increment for a given stem diameter) existed between species, (3) the equilibrium angle of the stem and the anatomical characters associated to the efficiency of the reaction also differed between species, (4) the differences in gravitropic reaction were related to the light requirements: heliophilic species, compared to more shade-tolerant species, had a larger efficiency and an equilibrium angle closer to vertical. This suggests that traits determining the gravitropic reaction are related to the strategy of light interception and may contribute to the differentiation of ecological strategies promoting the maintenance of biodiversity in tropical rain forests.
ISSN: 0022-0957

hal-00797023
https://hal.archives-ouvertes.fr/hal-00797023
https://hal.archives-ouvertes.fr/hal-00797023/document
https://hal.archives-ouvertes.fr/hal-00797023/file/Functional_diversity_gravitropic_Almeras_al.pdf

Éditeur(s) : HAL CCSD American Association for the Advancement of Science
Résumé : The biodiversity-productivity relationship (BPR) is foundational to our understanding of the global extinction crisis and its impacts on ecosystem functioning. Understanding BPR is critical for the accurate valuation and effective conservation of biodiversity. Using ground-sourced data from 777,126 permanent plots, spanning 44 countries and most terrestrial biomes, we reveal a globally consistent positive concave-down BPR, showing that continued biodiversity loss would result in an accelerating decline in forest productivity worldwide. The value of biodiversity in maintaining commercial forest productivity alone-US$166 billion to 490 billion per year according to our estimation-is more than twice what it would cost to implement effective global conservation. This highlights the need for a worldwide reassessment of biodiversity values, forest management strategies, and conservation priorities.
ISSN: 0036-8075

hal-01607784
https://hal.archives-ouvertes.fr/hal-01607784
DOI : 10.1126/science.aaf8957
PRODINRA : 389856