Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD University of Chicago Press
Résumé : International audience
In the North China block, the south Liaodong Peninsula massif is an elliptical metamorphic core complex (MCC) with a long axis trending NE‐SW. In cross‐section view, it is asymmetric, with a steeply dipping northwestern flank and a gently dipping southeastern flank. It consists of three lithotectonic units: a gneissic migmatite unit, a Paleo‐ to Meso‐Proterozoic micaschist‐slate unit, and a Neoproterozoic to Mesozoic sedimentary cover. Three deformation events related to extensional tectonics are distinguished in the study area: D1 is a ductile deformation related to the exhumation of the MCC; the following event, D2, corresponds to the development of recumbent folds formed during the early exhumation of the MCC; and the youngest event, D3, corresponds to brittle normal faulting that controlled the opening of a Cretaceous continental half‐graben basin. A pre‐D1 event characterized as northward verging is interpreted as the result of N‐S shortening that occurred in the Late Triassic during the final stages of the collision between the North and South China blocks. The ductile and brittle structures were developed coevally, with synkinematic plutonism and formation of half‐grabens. New 40Ar/39Ar and U/Pb Cretaceous ages obtained from the mylonitic granodiorite, gneissic migmatite, orthogneiss, and granite indicate that the south Liaodong Peninsula MCC is contemporaneous with other Cretaceous extensional structures, such as numerous syntectonic plutons bounded by ductile normal faults, MCC, and half‐graben basins, described in eastern China. Among the several hypotheses proposed to account for the Mesozoic extension along the eastern margin of Eurasia, lithosphere convective removal appears to be the most likely.
ISSN: 0022-1376

insu-00362879
https://hal-insu.archives-ouvertes.fr/insu-00362879
https://hal-insu.archives-ouvertes.fr/insu-00362879/document
https://hal-insu.archives-ouvertes.fr/insu-00362879/file/WeiLin-TheJournalofGeology-2008.pdf
DOI : 10.1086/527456

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The brittle structures of a Hercynian granite (La Borne, French Massif Central) observed at several scales, from regional to microscopic, are presented and interpreted on mechanical terms. Emphasis is placed on strike slip faults, joints, and cracks related to incipient shear fracturing during horizontal compression. Three compressive tectonic phases have been identified according to their brittle structures and characterised by the burial depth at the time of their generation.The two first phases (H1, H2) are Hercynian and occurred while the granite was deeply buried (∼5 to 3 km depth) whereas the last phase (P) is Pyrenean and occurred at very low depth. The geometric organizations of cracks, joints and faults are clearly similar at various scales from about 10 μm to several m.These field observations are strong arguments for the occurrence of shear structures at microscopic to macroscopic scales during tectonic events. Following this inference, it is proposed that, at least in the case of Hercynian phases, cracks, joints and macroscopic strike slip faults have been generated by the same mechanical process under high overburden weight. Therefore, incipient fractures seem to be generated as shearing structures and to evolve by coalescence with neighbouring ones with the same direction.
ISSN: 0191-8141

hal-01115718
https://hal.archives-ouvertes.fr/hal-01115718
DOI : 10.1016/j.jsg.2014.05.002

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite-bearing crustal shear zones are exhumed extensions at depth of (potentially seismogenic) brittle faultsat shallow structural level. By concentrating deformation, shear zones play a major role in the rheology and mechanicalbehavior of the continental crust. Analysis of shear zone geometry and microstructures is a useful toolto decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of thedeformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However,only rare examples provide geochronological data that can be unambiguously linked with deformation. Thus,time-scales over which major mylonite zones develop and remain active under ductile conditions as well as theirstrain rates often remain poorly documented. Several sections across the South Armorican Shear Zone (SASZ),a crustal-scale, several km-thick dextral shear zone were investigated by structural, petrological and Ar/Ar radiochronologicalmethods. Finite strain profiles on these sections showed a strong deformation partitioning towardsthe ultramylonite core of the SASZ, with a decrease, of both the C’/S mean angle (from ca. 45 to less than5) and the Quartz grain-size (from ca. 150 to 5 m). In parallel, conventional and in-situ Ar/Ar datings on thefabric-forming white micas were performed on compositionally complex white-micas. Inherited magmatic muscovitescarried by the foliation and newly-formed, syn-tectonic substituted phengites located along the shear bandsyielded 2 age groups for the less deformed samples. Along the shear zone cross-section, the difference betweenthese two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, thevery fine-grained syn-tectonic phengites yielded the same ca. 300-298 Ma age irrespectively of their distance to thecore of the shear zone, even in slightly deformed rocks distant by several km. These results support a new modelof crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history, i.e.the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves withtime, with an increasingly larger fraction partitioned in the ultramylonitic core. Besides, combination of the finitestrain estimations and the Ar/Ar ages enables us to assess the range of strain rates associated with mylonitization.
EGU General Assembly 2014
Vienne, Austria

insu-01565057
https://hal-insu.archives-ouvertes.fr/insu-01565057

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
In this paper, we provide the first structural map of Les Saintes archipelago (Guadeloupe, Lesser Antilles). The finite strain pattern displays four families of fault systems characterized by their statistical structural orientations: N000-N020, N050-N070, N090-N110 and N130-N140 trending fault systems. Our onshore results thus underline a fault network much more complex than the one depicted by the previous offshore geophysical investigations around Les Saintes archipelago, which show only N120-N150 trending system. According to the available K-Ar dating of the volcanic rocks and the relative chronology of the faults defined in the field, we determine the deformation history in Les Saintes islands since the last 3 Ma. The four highlighted trending fault systems are already active since the Pliocene and are consistent with the present-day extensional tectonics in the Guadeloupe archipelago compatible with the reactiva-tion of inherited structures at the active arc scale. We interpret the tectonic evolution of Les Saintes islands as the result of interplay between subduction of aseismic ridges (Tiburon and Barracuda ridges) and oblique convergence. Furthermore , we recognized an exhumed geothermal paleo-system in Terre-de-Haut island which is a good analogue of the present-day active Bouillante geothermal system. Its duration is estimated at 400 k.y. during the Pliocene.
EISSN: 1777-5817

hal-01625778
https://hal.univ-antilles.fr/hal-01625778
https://hal.univ-antilles.fr/hal-01625778/document
https://hal.univ-antilles.fr/hal-01625778/file/VeratIEtAl_Final.pdf
DOI : 10.2113/gssgfbull.187.1.3

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00622998
https://hal-brgm.archives-ouvertes.fr/hal-00622998
DOI : 10.2113/gssgfbull.182.2.181

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The deep structure and deformation mechanisms of the Longmen Shan thrust belt (Sichuan, China), at the eastern border of the Tibetan plateau, were largely debated after the devastating Mw 7.9 Wenchuan earthquake (2008). Recent geophysical studies and field investigations have been focused on the active motion of the major Beichuan fault, which ruptured during the earthquake. However, the total exhumation across the fault still remains unclear. In the hanging wall of the Beichuan fault, the South China block is exhumed in the Pengguan massif. Close to the Beichuan fault, the rocks of the Pengguan massif underwent greenschist facies metamorphism associated with brittle-ductile deformation. No metamorphism is observed in the footwall of the fault. In this study, we characterize and date the metamorphic history recorded in the hanging wall of the Beichuan fault in order to constrain the depth and timing of exhumation of the rocks of the Pengguan massif along the fault. A high-resolution petrological approach involving chemical analyses and X-ray maps was used to analyze the micrometric metamorphic minerals. The P-T conditions of the greenschist facies metamorphic event were estimated by an inverse multi-equilibrium thermodynamic approach. The results, 280 ± 30 °C and 7 ± 1 kbar, suggest that the rocks of the Pengguan massif were exhumed from ca. 20 km depth. Our results underline the importance of the thrusting component in the long-term behavior of the Beichuan fault and provide a minimal depth at which the fault is rooted. In situ laser ablation 40Ar/39Ar dating of metamorphic white mica revealed that the greenschist overprint occurred at 135–140 Ma.The Pengguan massif was therefore partially thrusted along the Beichuan fault during the Lower Cretaceous, long before the Eocene-Miocene exhumation phase which is well-constrained by low-temperature thermochronology. Our results provide the first independent depth information for the exhumation history of the Pengguan massif and reveal a previously undocumented Lower Cretaceous tectonic event that marks the onset of the thick-skinned deformation in the external domain of the Longmen Shan (East of the Wenchuan Fault).
ISSN: 0743-9547

hal-01685556
https://hal.archives-ouvertes.fr/hal-01685556
DOI : 10.1016/j.jseaes.2017.04.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD
Résumé : To study the dynamics of an orogen-foreland system and more particularly the impact of surface processes on its development, we base our work on two main axes. In a first part, using analogue tapered wedge models, we investigate the interplay between tectonics, erosion and sedimentation during the orogenic growth. The basis model mimics the evolution of a wedge section extending from the orogen to its foreland basin, with both the structural and the lithological heritages simulated. In a second part, the focus is on the recent tectonic and geomorphologic processes affecting the Swiss Prealpes klippen belt and surrounding structural units (Molasse basin and Jura fold-and-thrust belt). Remote sensing analyses allow to evaluate the impact of tectonics on the drainage pattern and landscape morphology. In addition, local field investigations in the Prealpes provide information on the nature and kinematic of brittle fractures and the paleostress fields.
Afin d'étudier la dynamique d'un système orogène/avant-pays et plus particulièrement l'impact des processus de surface sur son développement, notre travail se base sur deux axes principaux. Dans une première partie, à l'aide de modèles analogiques de prisme d'accrétion, nous analysons les interactions entre la tectonique, l'érosion et la sédimentation au cours de la croissance de l'orogène. Le modèle de base reproduit l'évolution d'une section de prisme, qui s'étend de l'orogène au bassin d'avant-pays, et où les héritages à la fois structural et lithologique sont simulés. Dans une seconde partie, l'accent est mis sur la tectonique récente et les processus géomorphologiques qui affectent la klippe des Préalpes suisses et les unités structurales environnantes (le bassin molassique et le Jura). Des analyses de télédétection permettent d'évaluer l'influence de la tectonique sur le réseau de drainage et la morphologie du paysage. De plus, des analyses de terrain menées localement dans les Préalpes fournissent des informations sur la nature et la cinématique des fractures cassantes et des champs de paléocontraintes.
https://tel.archives-ouvertes.fr/tel-00138836

tel-00138836
https://tel.archives-ouvertes.fr/tel-00138836
https://tel.archives-ouvertes.fr/tel-00138836/document
https://tel.archives-ouvertes.fr/tel-00138836/file/These_Bonnet_2007.pdf

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Although they are famous among Earth scientists, the Lherz peridotites are exposed within geological formations of the North Pyrenean Zone (NPZ) still lacking detailed investigations. Our study focuses on the metasediments of the Aulus basin hosting the Lherz peridotite body and associated ultramafic fragments of smaller size. The new data set comprises of structural analysis and detailed geological mapping of the massive Mesozoic marbles that form the prerift sequence typical of the NPZ and of the ultramafic-rich clastic breccia formations surrounding the peridotite bodies. The massive marbles display an evolution from hot and ductile to cold and brittle deformation, indicative of an exhumation process ending with the sedimentary reworking of both the deformed Mesozoic metasediments and the exhumed ultramafic rocks. Crystal Preferred Orientations (CPO) measured in the marbles support a deformation mechanism by dislocation creep of calcite, which is dominant between 400 8C and 600 8C; these deformation temperatures are within the range determined earlier by Clerc et al. (2015), using RSCM (Raman Spectroscopy of Carbonaceous Material) geothermometry. As a consequence, we better describe the transition from ductile to brittle deformation in the prerift marbles and clarify the origin of the syn-rift breccias. Due to continuous exhumation along detachments' faults, the brecciated metamorphic carbonates of the prerift NPZ sedimentary cover were passively uplifted towards shallower levels and progressively unroofed, while transported passively on the back of the exhumed ultramafic footwall. These results are consistent with the recent interpretations of the North Pyrenean peridotites as remnants of subcontinental mantle rocks exhumed within the pre-Pyrenean rift system. We emphasize the importance of tectonic decoupling between the Mesozoic sedimentary cover and the Palaeozoic basement, which leads to the juxtaposition of metamorphosed and deformed Mesozoic Please cite this article in press as: Lagabrielle Y, et al. Very high geothermal gradient during mantle exhumation recorded in mylonitic marbles and carbonate breccias from a Mesozoic Pyrenean palaeomargin (Lherz area, North Pyrenean Zone, France). C. R. Geoscience (2016), http://dx.
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079/document
https://hal-insu.archives-ouvertes.fr/insu-01285079/file/1-s2.0-S1631071315002060-main.pdf
DOI : 10.1016/j.crte.2015.11.004

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The initiation and subsequent evolution of intra-plate orogens, resulting from continental plate interior deformation due to transmission of stresses over large distances from the active plate boundaries, is controlled by lateral and vertical strength contrasts in the lithosphere. We present lithospheric-scale analogue models combining 1) lateral strength variations in the continental lithosphere, and 2) different vertical rheological stratifications. The experimental continental lithosphere has a four-layer brittle–ductile rheological stratification. Lateral heterogeneity is implemented in all models by increased crustal strength in a central narrow block. The main investigated parameters are strain rate and strength of the lithospheric mantle, both playing an important role in crust–mantle coupling. The experiments show that the presence of a strong crustal domain is effective in localizing deformation along its boundaries. After deformation is localized, the evolution of the orogenic system is governed by the mechanical properties of the lithosphere such that the final geometry of the intra-plate mountain depends on the interplay between crust–mantle coupling and folding versus fracturing of the lithospheric mantle. Underthrusting is the main deformation mode in case of high convergence velocity and/or thick brittle mantle with a final asymmetric architecture of the deep lithosphere. In contrast, lithospheric folding is dominant in case of low convergence velocity and low strength brittle mantle, leading to the development of a symmetric lithospheric root. The presented analogue modelling results provide novel insights for 1) strain localization and 2) the development of the asymmetric architecture of the Pyrenees.
ISSN: 0012-821X

hal-01243577
https://hal.archives-ouvertes.fr/hal-01243577
DOI : 10.1016/j.epsl.2015.05.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We compile field data collected along the eastern part of the North Pyrenean Zone (NPZ) to point to a tectonic evolution under peculiar thermal conditions applying to the basin sediments in relation with the opening of the Cretaceous Pyrenean rift. Based on this compilation, we show that when thinning of the continental crust increased , isotherms moved closer to the surface with the result that the brittle-ductile transition propagated upward and reached sediments deposited at the early stage of the basin opening. During the continental breakup, the pre-rift Mesozoic cover was efficiently decoupled from the Paleozoic basement along the Triassic evaporite level and underwent drastic ductile thinning and boudinage. We suggest that the upper Albian and upper Creta-ceous flysches acted as a blanket allowing temperature increase in the mobile pre-rift cover. Finally, we show that continuous spreading of the basin floor triggered the exhumation of the metamorphic, ductily sheared pre-rift cover, thus contributing to the progressive thinning of the sedimentary pile. In a second step, we investigate the detailed geological records of such a hot regime evolution along a reference-section of the eastern NPZ. We propose a balanced restoration from the Mouthoumet basement massif (north) to the Boucheville Albian basin (south). This section shows a north to south increase in the HT Pyrenean imprint from almost no metamorphic recrystallization to more than 600 °C in the pre-and syn-rift sediments. From this reconstruction, we propose a scenario of tectonic thinning involving the exhumation of the pre-rift cover by the activation of various detachment surfaces at different levels in the sedimentary pile. In a third step, examination of the architecture of current distal passive margin domains provides confident comparison between the Pyrenean case and modern analogs. Finally, we propose a general evolutionary model for the pre-rift sequence of the Northeastern Pyrenean rifted margin.
ISSN: 0040-1951

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01355131
https://hal-insu.archives-ouvertes.fr/insu-01355131
https://hal-insu.archives-ouvertes.fr/insu-01355131/document
https://hal-insu.archives-ouvertes.fr/insu-01355131/file/TECTO10807-Incorporated%20changes-rev2.pdf
DOI : 10.1016/j.tecto.2016.07.022

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00498286
https://hal.archives-ouvertes.fr/hal-00498286

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Schistes Lustres of Alpine Corsica (France) serpentinized mantle rocks are associated with continental basement and meta-volcanic/-seclimentary cover rocks. The relationships among these different lithologies are especially well exposed in the Monte San Petrone unit, where Alpine metamorphism reached lawsonite-eclogite conditions. The contact between serpentinites and slivers of continental basement, relatively flat-lying over several kilometers, is characterized by evidence of cataclastic deformation pre-dating Alpine High-Pressure ductile fabrics. The serpentinite/continental basement pair is stratigraphically overlain by metasediments with a typical Jurassic-Cretaceous supra-ophiolitic lithostratigraphy, with metaradiolarites passing upward to marbles and cal cschists. Noticeably, no evidence of cataclastic deformation is found in metasediments. These observations indicate that the lithostratigraphy of the Monte San Petrone unit was established during a pre-Alpine polyphase evolution, which culminated in extensive brittle deformation along a flat-lying detachment fault prior to the deposition of Jurassic sediments. We suggest that the inferred Mesozoic extensional tectonics were related to the opening of the Westem Tethys. The Mesozoic architecture of the Monte San Petrone area, which is typical of an Ocean-Continent Transition (OCT) zone, was preserved despite Alpine deformation and metamorphism, when the different lithologies (i.e. meta-ophiolites, continent-derived rocks and metasediments) underwent a common metamorphic evolution, culminating at T=490-550 degrees C and P= 2.2-2.6 GPa. Similar tectonostratigraphic associations are observed in other high-pressure terranes of Alpine Corsica, suggesting that inherited OCT-type domains may be common in Alpine-type orogens.
ISSN: 0024-4937

hal-00617744
https://hal.archives-ouvertes.fr/hal-00617744
DOI : 10.1016/j.lithos.2011.02.013

Éditeur(s) : HAL CCSD
Résumé : International audience
Hundreds of Paleoproterozoic gold occurrences are known in the Tapajós Gold Province, northern Brazil. However, few deposits have been analysed in detail to understand the genesis of these systems. In this study, we present data concerning the largest deposit presently known in this Province, the Tocantinzinho deposit. A strike-slip fault system controls the emplacement of the mineralized rocks and the development of the brittle fracturing that host the main gold mineralization. Hydrothermal activity played an important role in the mineralization processes.
Mineral Resources in a Sustainable World
Nancy, France

hal-01356009
https://hal.archives-ouvertes.fr/hal-01356009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028