Résumé : La forte variabilité de la vitesse du vent fait que l'énergie produite par un parc éolien n'est pas constante dans le temps. Le gestionnaire ne peut donc pas dimensionner son réseau électrique en prenant intégralement ce type de production en compte. L' une des solutions préconisées pour permettre le développement de l' éolien et son intégration avec une plus grande sureté aux réseaux, est de développer et d'améliorer les outils de prévisions. Le travail de thèse consiste à améliorer les performances d'un outil de prédiction basé sur les réseaux de neurones bayesiens, permettant la prédiction de la puissance à très court terme . Le prédicteur fonctionne notamment par J'ajustement de paramètres, certain se détermine « automatiquement » via le mécanisme des réseaux de neurones bayesiens d' autres, que nous nommerons paramètres temporels, sont à l' appréciation de l'utilisateur. Le travail mené consiste à établir un protocole pour la fixation de ces paramètres tout en améliorant les performances du prédicteur . Nous avons donc décidé de conditionner leurs valeurs en fonction de la variabilité des séquences de puissance précédent l'instant de prévision. Tout d'abord nous avons classifié des séquences de puissance en fonction de leurs coefficients de variation en appliquant la méthode des C-moyennes floues. Puis, chaque classe formée a été testée sur plusieurs valeurs de paramètres, les valeurs associées aux meilleures prédictions ont été retenues. Enfin, ces résultats couplés au formalisme des Chaines de Markov, par le biais de la matrice de transition , ont perm is d'obtenir des taux d'amélioration par rapport à la persistance allant de 7,73 à 23,22 % selon l'horizon de prédiction considéré
The high variability of the wind speed has for conse quences that the energy produced by a wind farm is not constant over time. Therefore, the manager can't size the electrical network by takin g into account this type of production. One solution advocated for the development of wind energy and its integrati on with greater security at network, is to develop and improve fore casting tools. The thesi s objective is to improve the performance of a predi ction tool based on Bayesian neural networks, allowing the predi ction of wind power for short timescales. The predictor works, in part icular by the adjustment of parameters, sorne is determined "automatically" through the mechan ism of neural networks Bayesian other , which we cali temporal parameters are at the discretion of the user. The work involves establishing a protocol for the determination of these parameters and improving the performance of the predictor. So, we decided to condition their values depending on the sequence variability of wind power previous the moment of the forecast. First we classified sequences of power according to their coefficients of variation using the method of fuzzy C-means. Then, each formed class was tested for several parameters values, the values associated with the best predictions were selected. Finally , these result s coupled with the formalism of Markov chains , through the transition matrix allowed to obtain rates of improvement over the persistence ranging from 7.73 to 23.22 % depending on the prediction horizon considered

http://www.theses.fr/2013AGUY0679/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Networks of localized conjugate compactive shear bands with large dihedral angles (corresponding to so-called shear-enhanced compaction bands) were generated in 3-layer plane strain finite-difference models. The central layer has elastic–plastic properties with a small positive internal friction coefficient, negative dilatancy factor, and the hardening modulus reducing during the deformation. The two other layers are elastic. The spatial organization of the networks in the central layer, resulting from the elastic–plastic instability of the 3-layer system, was shown to be dependent on the contrast of the elastic stiffness of the layers and on the friction between them. When the stiffness E of the elastic layers and/or the friction are small, the networks are rather symmetric (the bands of both orientation families are distributed homogeneously within the layer). An increase in E at high friction, results in the clustering of the bands of one orientation along a layer segment which is followed by another segment filled with the bands of the other orientation. Different network types are characterized by different band spacing which is smaller in the clustered networks. The intensity of inelastic deformation and hence of porosity reduction within the bands are also smaller in this case. The obtained band networks are very similar to those in nature where the same variability of the network organization is observed. Available geological and mechanical data confirm the conclusions from the modeling about the origin of this variability.
ISSN: 0040-1951

hal-01116201
https://hal.archives-ouvertes.fr/hal-01116201
DOI : 10.1016/j.tecto.2014.01.021

Éditeur(s) : HAL CCSD Station Biologique
Résumé : International audience
This study deals with temporal variations in eel diet Anguilla anguilla sampled at each of the four seasons in the Languedocian Prévost lagoon (Gulf of Lion) from Autumn 1998 to Summer 1999. The following feeding indices were calculated based on observations of 12 categories of prey found in the contents of full stomachs: coefficient of vacuity CV, degree of fullness DR, occurrence frequency PP, relative abundance N (in %) and relative weight P (in %). The interpretation of results is also based on the Costello's method (1990) which combines PP and N. Anguilla anguilla mainly feeds on benthic organisms, primarily Gammarus gr. locusta, Polychaeta, insect larvae, small fish. Based on variations in eel diet, seasonal influence is illustrated by a decrease in feeding activity in summer which gradually increases during the following seasons. The good trophic quality available to eels in the Prévost lagoon depends on its hydrodynamics which is directly related to the movement of water entering and leaving lagoon by a short communication with the sea. This water movement accelerates the enrichment and production processes of this ecosystem. Changes observed during the four seasons illustrate an opportunistic type of feeding behaviour. Eels consume the most available benthic prey. They favour the importance of the prey at a given moment without using a particular feeding strategy like specialisation or generalisation. Thus, eel adapts its diet in adjusting available energy resources in the ecosystem. Because of this, the lagoon-resident species Anguilla anguilla is an obvious indirect bioindicator of the trophic capacity and present level of confinement in the brackish water lagoon ecosystem of Prévost.
ISSN: 0007-9723

hal-00753021
https://hal.univ-antilles.fr/hal-00753021

Éditeur(s) : Ecole Nationale Supérieure Agronomique de Rennes (ENSAR)
Résumé : Artificial Fish Aggregating Devices (FADs) are known to concentrate tropical tunas. This aggregative behaviour drastically increases the vulnerability of these species to fishing. Alternatively, FADs can be used as oceanic observatories to study the aggregative behaviour of large pelagic fish. We conducted sea surveys in Martinique (Lesser Antilles) to i) establish a typology of the pelagic fish aggregations found around moored FADs ii) study their relations with their biotic and abiotic environment and the local fishery. The mean biomass of large pelagic fish aggregations was also estimated to provide scientific inputs to achieve a sustainable management of the moored FAD fishery. The first part presents the background of the study. We introduce the regional pelagic ecosystem, the aggregative behaviour of pelagic fish around FADs and the Martinican moored FAD fishery. The second part begins with a presentation of the conceptual framework of the study: the hierarchy theory. Observation scales and survey methodology are therefore described. Repeated echosounder surveys run in a star pattern were conducted around 2 moored FADs, in combination with underwater video observations, classical fishing experiments and CTD profiles. In the third part, the elements of the [moored FAD ¿ pelagic fish - environment - fishing] system and their interactions are numerically characterised in the vertical plane. The main type of pelagic fish aggregation was a large aggregation distributed in sub-surface (40-100 m) within a radius of 400 m of the FAD. This aggregation was mostly made of 60 cm FL blackfin tunas (Thunnus atlanticus). It appeared at sunrise and mostly spread away in the late afternoon. It was observed during all daytime surveys. The average density and the vertical structure of the micronektonic sound scattering layers (SSLs) were assessed locally around a FAD for 48h cycles. These SSLs descriptors showed positive correlation with the size and the abundance of the sub-surface tuna aggregation. Whereas this aggregation accounted for about 95% of the total biomass aggregated around a moored FAD, it was nearly unexploited by the local commercial fishermen. The fourth part focuses on the sub-surface tuna aggregation. A high variability of the spatial distribution of the aggregation was evidenced in the horizontal plane at daily, day to day and monthly temporal scales. These variations were related to fluctuations of the global abundance of the aggregation. The daytime average density of sub-surface tuna was modelled as a function of the distance to FAD, within an advection-diffusion framework. Based on these results, a universal kriging model was designed to assess the mean maximum daily biomass of the sub-surface tuna aggregation. This mean biomass estimate yielded 11 tons with an estimation error of 26%. To conclude, we present a hierarchical organization in space and time of a sub-surface tuna population distributed within a network of moored FADs, from micro to meso-scale. We suggest that the spatial distribution of tunas can be explained from fine to coarse-scales by behavioural processes (self-organization, feeding, aggregative behaviour) whereas their spatial distribution is mainly forced by environmental processes at broader scales.
L'utilisation de Dispositifs de Concentration de Poissons permet de provoquer la formation de larges agrégations de thonidés autour de dispositifs artificiels, ce qui augmente considérablement la vulnérabilité de ces ressources vis-à-vis de l'exploitation halieutique. Les DCP peuvent également être utilisés en tant qu'observatoires océaniques, afin d'étudier le comportement agrégatif du macronecton pélagique. Nous avons ainsi réalisé des observations autour de DCP ancrés en Martinique, afin de définir une typologie des agrégations de macronecton et de étudier leurs relations avec leur environnement biotique, abiotique et l'exploitation halieutique locale. Nous avons ensuite estimé la biomasse moyenne de macronecton agrégé autour d'un DCP ancré, afin de fournir des éléments scientifiques nécessaires à une gestion durable de ces ressources. La première partie présente le contexte de l'étude i.e. l'écosystème pélagique régional, le phénomène d'agrégation du macronecton autour des DCP et la pêche associée aux DCP ancrés en Martinique. La deuxième partie introduit la théorie de la hiérarchie qui a fourni le cadre conceptuel de l'étude et présente les échelles et méthodes d'observation. Le principal outil d'observation est un échosondeur scientifique, mis en oeuvre le long de parcours en étoile autour du DCP. Les prospections acoustiques ont été combinées à des observations vidéo sous marines, des pêches expérimentales et un suivi in-situ de l'environnement abiotique. La troisième partie présente une typologie des éléments constituant le système [DCP ancré - macronecton - environnement - pêche] dans le plan vertical et précise leurs interactions. Le type d'agrégation de macronecton dominant est une grande agrégation composée d'une majorité de thons noirs (Thunnus atlanticus) de taille moyenne (60 cm) distribuée en sub-surface (40-100 m), dans un rayon de 300 m autour de la tête des DCP. Cette agrégation se forme au lever du soleil et se disperse presque totalement dans l'après midi. Elle a été observée de jour lors de toutes les campagnes. Une corrélation positive entre la densité et la structure moyenne des couches micronectoniques diurnes évaluée localement autour du DCP au cours de 48 h et les dimensions et l'énergie acoustique de l'agrégation de thons de subs-surface a été mise en évidence. Malgré le fait que cette agrégation représente en moyenne 95 % de l'énergie acoustique du macronecton autour des DCP, elle est presque inexploitée par les pêcheurs artisans locaux. La quatrième partie met en évidence les fortes variations conjointes de la distribution spatiale dans le plan horizontal de la densité de l'agrégation de thons de sub-surface et de son abondance globale. Ces variations ont été observées au cours du cycle nycthéméral et aux échelles inter-journalières et mensuelles. La distribution spatiale moyenne de la densité diurne de l'agrégation en fonction de la distance au centre de gravité de l'agrégation est cependant très stable et peut être modélisée au moyen d'une équation d'advection-diffusion. Un modèle de krigeage universel, utilisant les résultats du modèle d'advection-diffusion, a permis d'évaluer la biomasse maximale journalière moyenne de l'agrégation de thons de sub-surface à une dizaine de tonnes, avec un coefficient de variation d'estimation de 26%. Nous proposons une représentation hiérarchique synthétique de la distribution spatiale d'une sous-population de thons dans un réseau de DCP ancrés de la micro à la méso-échelle. Nous suggérons que la distribution spatiale des thons est déterminée principalement à l'échelle fine (100m-1km) et à l'échelle grossière (1-10 km) par des processus comportementaux (auto-organisation, agrégation, nutrition) et par des processus environnementaux à échelle plus large.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-1735.pdf
http://archimer.ifremer.fr/doc/2006/sup-1735.pdf
http://archimer.ifremer.fr/doc/00000/1735/

Éditeur(s) : HAL CCSD
Résumé : soutenue le 09 juin 2008
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gap in their structure. The controled variation of the graphite's crystal and electronic structure by intercalation processes of different species (electrophile, nucleophile ...) give a possibility to study in a more deeply way the friction reduction processes for low dimensional compounds. Three groups of intercalant are studied and tribological properties are correlated to structural and chemical evolutions.
Les propriétés tribologiques intrinsèques des composés lamellaires sont généralement attribuées à la présence de gap de van der Waals dans leur structure. La possibilité de faire varier de manière contrôlée la structure cristalline et la structure électronique du graphite par processus d'intercalation de différentes espèces chimiques (électrophile, nucléophile ...) sont utilisées pour étudier de façon plus approfondie les processus de réduction du frottement par les composés de basse dimensionnalité. Trois familles d'intercalants sont étudiées et les propriétés tribologiques sont corrélées aux évolutions structurales et chimiques.
https://tel.archives-ouvertes.fr/tel-00431713

Droits : info:eu-repo/semantics/OpenAccess
tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713/document
https://tel.archives-ouvertes.fr/tel-00431713/file/These-DELBE_Karl.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An inter-laboratory exercise was organized under the PHARMAS EU project, by the Advanced School of Public Health (EHESP), in order to evaluate the performances of analytical methods for the measurement of antibiotics in waters (surface and tap). This is the first time such an exercise on antibiotics has been organized in Europe, using different kinds of analytical methods and devices. In this exercise thirteen laboratories from five countries (Canada, France, Italy, the Netherlands and Portugal) participated, and a total number of 78 samples were distributed. During the exercise, 2 testing samples (3 bottles of each) prepared from tap water and river water, respectively, spiked with antibiotics, were sent to participants and analyzed over a period of one month. A final number of 77 (98.7%) testing samples were considered. Depending on substances studied by each participant, 305 values in duplicate were collected, with the results for each sample being expressed as the target concentration. A statistical study was initiated using 611 results. The mean value, standard deviation, coefficient of variation, standard uncertainty of the mean, median, the minimum and maximum values of each series as well as the 95% confidence interval were obtained from each participant laboratory. In this exercise, 36 results (6% of accounted values) were outliers according to the distribution over the median (box plot). The outlier results were excluded. In order to establish the stability of testing samples in the course of the exercise, differences between variances obtained for every type of sample at different intervals were evaluated. The results showed no representative variations and it can be considered that all samples were stable during the exercise. The goals of this inter-laboratory study were to assess results variability when analysis is conducted by different laboratories, to evaluate the influence of different matrix samples, and to determine the rate at which participating laboratories successfully completed the tests initiated.
Talanta

hal-00878118
https://hal.archives-ouvertes.fr/hal-00878118
DOI : 10.1016/j.talanta.2012.06.064
PUBMED : 22939142

Éditeur(s) : Taylor & Francis Ltd
Résumé : A new method is developed to estimate daily turbulent airsea fluxes over the global ocean on a 0.25 degrees grid. The required surface wind speed (w(10)) and specific air humidity (q(10)) at 10m height are both estimated from remotely sensed measurements. w(10) is obtained from the SeaWinds scatterometer on board the QuikSCAT satellite. A new empirical model relating brightness temperatures (T-b) from the Special Sensor Microwave Imager (SSM/I) and q(10) is developed. It is an extension of the author's previous q(10) model. In addition to T-b, the empirical model includes sea surface temperature (SST) and airsea temperature difference data. The calibration of the new empirical q(10) model utilizes q(10) from the latest version of the National Oceanography Centre airsea interaction gridded data set (NOCS2.0). Compared with mooring data, the new satellite q(10) exhibits better statistical results than previous estimates. For instance, the bias, the root mean square (RMS), and the correlation coefficient values estimated from comparisons between satellite and moorings in the northeast Atlantic and the Mediterranean Sea are 0.04gkg(1), 0.87gkg(1), and 0.95, respectively. The new satellite q(10) is used in combination with the newly reprocessed QuikSCAT V3, the latest version of SST analyses provided by the National Climatic Data Center (NCDC), and 10m air temperature estimated from the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalyses (ERA-Interim), to determine three daily gridded turbulent quantities at 0.25 degrees spatial resolution: surface wind stress, latent heat flux (LHF), and sensible heat flux (SHF). Validation of the resulting fields is performed through a comprehensive comparison with daily, in situ values of LHF and SHF from buoys. In the northeast Atlantic basin, the satellite-derived daily LHF has bias, RMS, and correlation of 5Wm(2), 27Wm(2), and 0.89, respectively. For SHF, the statistical parameters are 2Wm(2), 10Wm(2), and 0.94, respectively. At global scale, the new satellite LHF and SHF are compared to NOCS2.0 daily estimates. Both daily fluxes exhibit similar spatial and seasonal variability. The main departures are found at latitudes south of 40 degrees S, where satellite latent and sensible heat fluxes are generally larger.
International Journal Of Remote Sensing (0143-1161) (Taylor & Francis Ltd), 2013-07 , Vol. 34 , N. 14 , P. 5243-5261

Droits : 2013 Taylor & Francis
http://archimer.ifremer.fr/doc/00137/24825/23575.pdf
DOI:10.1080/01431161.2013.787502
http://archimer.ifremer.fr/doc/00137/24825/

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
*Context Increased knowledge on diversity in wood properties would have implications both for fundamental research and for promoting a diversification of uses as material. *Aims The objective is to contribute to overcoming the critical lack of data on the diversity of wood dynamic mechanical/viscoelastic vibrational properties, by testing lesser-known species and categorizing sources of variability. *Methods Air-dry axial specific dynamic modulus of elasticity (E'/γ) and damping coefficient (tanδ) were measured on a wide sampling (1792 specimens) of 98 wood types from 79 species. An experimental device and protocol was designed for conducting systematic (i.e. rapid and reproducible) characterizations. *Results Diversity at the specimens' level corroborates the "standard" relationship between tanδ and E'/γ, which is discussed in terms of orientation of wood elements and of chemical composition. Diversity at the species level is expressed on the basis of results for normal heartwood, with specific gravity (γ) ranging from 0.2 to 1.3. Axial E'/γ ranges from 9 to 32 GPa and tanδ from 4×10-3 to 19×10-3. Properties distribution follows a continuum, but with group characteristics. The lowest values of tanδ are only found in certain tropical hardwoods. Results can also suggest alternative species for musical instruments making.
Annals of Forest Science

hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242/document
DOI : 10.1007/s13595-011-0166-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent research has demonstrated the importance of dermal exposure for some semivolatile organic compounds (SVOCs) present in the gas phase of indoor air. Though models for estimating dermal intake from gaseous SVOCs exist, their predictions can be subject to variations in input parameters, which can lead to large variation in exposure estimations. In this sensitivity analysis for a steady state model, we aimed to assess these variations and their determinants using probabilistic Monte Carlo sampling for 8 SVOCs from different chemical families: phthalates, bisphenols, polycyclic aromatic hydrocarbons (PAHs), organophosphorus (OPs), organochlorines (OCs), synthetic musks, polychlorinated biphenyls (PCBs) and polybromodiphenylethers (PBDEs). Indoor SVOC concentrations were found to be the most influential parameters. Both Henry's law constant (H) and octanol/water partition coefficient (Kow) uncertainty also had significant influence. While exposure media properties such as volume fraction of organic matter in the particle phase (fom-part), particle density (ρpart), concentration ([TSP]) and transport coefficient (ɣd) had a slight influence for some compounds, human parameters such as body weight (W), body surface area (A) and daily exposure (t) make a marginal or null contribution to the variance of dermal intake for a given age group. Inclusion of a parameter sensitivity analysis appears essential to reporting uncertainties in dermal exposure assessment.
ISSN: 0160-4120

hal-01526430
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01526430
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01526430/file/Dermal%20absorption%20of%20semivolatile%20organic%20compounds_accepted.pdf
DOI : 10.1016/j.envint.2017.02.005
PUBMED : 28249739

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Grain deviations and high extractives content are common features of many tropical woods. We aimed at clarifying their respective impact on vibrational properties, referring to African Padauk (Pterocarpus soyauxii Taub.), a species selected for its interlocked grain, high extractives content, and uses in xylophones. Specimens were cut parallel to the trunk axis (L), and local variations in grain angle (GA), microfibril angle (MFA), specific Young's modulus (E'L/ρ, where r stands for specific gravity) and damping coefficient (tanδL), were measured. GA dependence was analyzed by a mechanical model which allowed to identify the specific Young's modulus (E'3/ρ) and shear modulus (G'/ρ) along the grain (3), as well as their corresponding damping coefficients (tanδ3, tanδG). This analysis was done for native and then for extracted wood. Interlocked grain resulted in 0-25° GA and in variations of a factor 2 in E'L/ρ and tanδL. Along the grain, Padauk wood was characterized, as compared to typical hardwoods, by a somewhat lower E'3/ρ and elastic anisotropy (E'/G'), due to a wide microfibril angle plus a small weight effect of extracts; and a very low tanδ3 and moderate damping anisotropy (tanδG/tanδ3). Extraction affected mechanical parameters in the order: tanδ3 ≈ tanδG > G'/ρ >> E'3/ρ. That is, extractives' effects were nearly isotropic on damping but clearly anisotropic on storage moduli.
ISSN: 0043-7719

hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382/document
https://hal.archives-ouvertes.fr/hal-00544382/file/Identification_anisotropic_vibrational_properties_Bremaud_al.pdf
DOI : 10.1007/s00226-010-0348-0

Éditeur(s) : HAL CCSD American Institute of Physics
Résumé : International audience
In order to be able to provide valuable data in multiparameter measurement field operations, tiltmeters need to have a noise level better or equal than 10-9 rad for a period range from a few minutes to a few years and a long term stability ranging from 10-7 to 10-8 rad/yr. Tiltmeter measurements should also be as much as possible insensitive to thermal disturbances, by taking great care of the horizontality of the base line tube first. Secondly, thermal responses have been assessed. We also took great care of the coupling of our tiltmeters with the bedrock. We've designed a long base tiltmeter with sensors in silica which has a low dilatation coefficient. The linear variable displacement transducer is based on coil coupling (powered by an alternative voltage). Finally we show the results of two 100 m silica water tube tiltmeters which were installed in a mine in the French Vosges massif in the framework of a hydrology research project. These instruments show a remarkably good stability (6.5×10-9 rad/month) and a low noise level (of the order of 10-11 rad). Toroidal and spheroidal free modes of the Earth were observed after the two last major earthquakes on Sumatra.
ISSN: 0034-6748

hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013/document
https://hal.archives-ouvertes.fr/hal-00708013/file/2008_RSI.pdf
BIBCODE : 2008RScI...79c4502B

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Most kimberlites contain abundant dunitic nodules. These are centimetre-sized, rounded and multi-grained assemblages of xenocrystic olivine with a wide range of compositions (Fo83 to Fo94). The absence of orthopyroxene and other mantle minerals and the range of olivine compositions have been attributed to reaction between mantle peridotite and (proto)kimberlitic fluid or melt, but the timing of the reaction is a subject of debate. In a kimberlite from the Kangamiut region of Greenland, nodule cores are surrounded by fine-grained outer margins with near-constant Fo contents (∼Fo88) but highly variable minor element contents (e.g. 500–2500 ppm Ni). These margins crystallized from the kimberlite melt and we show that their compositions can be explained by crystallization of olivine alone, if a high partition coefficient for Ni between melt and olivine (DNi > 20) is assumed. Orthopyroxene assimilation is not required, removing the constraint that its dissolution occurred during ascent of the kimberlite magma. Within some nodules, in addition to the usual core-to-margin gradients, we observe asymmetric compositional changes (variable Fo but near-constant minor element contents) across mobile grain boundaries. These changes document fluid percolation at the grain scale that occurred during dynamic recrystallization in the deforming lithospheric mantle. We note that chemical gradients associated with mobile grain boundaries are observed in olivines that cover the entire compositional range of the nodules, and propose that fluid-assisted dynamic recrystallization took place in dunite that was already compositionally heterogeneous. Reaction between peridotite and protokimberlitic melt or fluid and dissolution of orthopyroxene thus occurred within the lithospheric mantle, immediately (a few days) prior to the ascent of the kimberlite melt and the entrainment of the dunite nodules. We propose that the grain boundary zones probably mimic, at a fine scale, the fluid–peridotite interaction that caused, at a larger scale, orthopyroxene dissolution and formation of compositionally diverse olivine in kimberlites.
ISSN: 0022-3530

hal-01277963
https://hal.archives-ouvertes.fr/hal-01277963
DOI : 10.1093/petrology/egv054

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gaps in their structure through which interlayer interactions are weak. The controlled variation of the distances and interactions between graphene layers by intercalation of electrophilic species in graphite is used in order to explore more deeply the friction reduction properties of low-dimensional compounds. Three graphite intercalation compounds with antimony pentachloride, iron trichloride and aluminium trichloride are studied. Their tribological properties are correlated to their structural parameters, and the interlayer interactions are deduced from ab initio bands structure calculations.
ISSN: 1023-8883

hal-00767639
https://hal.archives-ouvertes.fr/hal-00767639
https://hal.archives-ouvertes.fr/hal-00767639/document
https://hal.archives-ouvertes.fr/hal-00767639/file/Delbe_6330.pdf
DOI : 10.1007/s11249-012-9981-0

Éditeur(s) : HAL CCSD Lippincott, Williams & Wilkins
Résumé : International audience
Purpose of review Toxoplasmosis in immunocompromised patients is associated with a high mortality rate. Molecular techniques are important tools to diagnose acute disease in immunocompromised patients, but there are various methods with variable efficiency. Some of them have been validated for the diagnosis of congenital toxoplasmosis, but the impact of their use has not been evaluated in immunocompromised patients. Recent findings Toxoplasmosis is of increasing importance in non-HIV immunocompromised patients. In addition, the picture of disease shows greater severity in South America, both in immunocompetent study participants and in congenitally infected infants. These epidemiological differences could influence the sensitivity of diagnostic methods. This review analyzes recent data on molecular diagnosis and compares them with older ones, in light of progress gained in molecular techniques and of recent epidemiological findings. Most recent studies were conducted in South America and used PCR targeting the B1 gene. PCR on blood could allow diagnosing a significant proportion of patients with ocular toxoplasmosis in Brazil. Summary Quantitative PCR methods with specific probes should be used to improve sensitivity and warrant specificity. Performance of quantitative PCR targeting the repeated 529 bp sequence for the diagnosis of toxoplasmosis in immunocompromised patients needs evaluation in field studies in South America and in western countries.
ISSN: 0951-7375

hal-01390970
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01390970
DOI : 10.1097/QCO.0000000000000275
PUBMED : 27191201

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mantle noble gases record important and ancient isotopic heterogeneities, which fundamentally influence our understanding of mantle geodynamics, yet these heterogeneities are difficult to fully interpret without understanding the basic mechanisms of noble gas storage and transport in mantle minerals. A series of annealing experiments that mimic mantle conditions (i.e. sub-solidus with natural, polycrystalline, texturally equilibrated olivines at low noble gas partial pressures) show that intergranular interfaces (grain boundaries) are major hosts for noble gases in the mantle, and that interfaces can dramatically fractionate noble gases from their radio-parents (U + Th and K). Therefore, noble gas isotopic heterogeneities in the mantle could result from grain size variations. Fine-grained lithologies (mylonites and ultramylonites, for example) with more grain boundaries will have lower U/3He ratios (compared to a coarse grained equivalent), which, over time, will preserve higher 3He/4He ratios. As predicted by theory of points defect diffusivity, these results show that noble gas diffusion along interfaces is different from those in the grain lattice itself at low temperatures. However, for grain size relevant of the Earth's mantle, the resulting effective correlated activation energies (Ea)(Ea) and pre-exponential factors (Do/a2)(Do/a2) produce similar diffusivities at mantle temperatures for interface- and lattice-hosted helium. Therefore, grain boundaries do not significantly affect helium transport at mantle conditions and length scales.
ISSN: 0012-821X

hal-01236013
https://hal.archives-ouvertes.fr/hal-01236013
DOI : 10.1016/j.epsl.2015.08.024

Résumé : Une étude de faisabilité de poutres en bois lamellé-collé a été menée en Guyane Française en utilisant les essences locales. Le but est de déterminer les paramètres de collage assurant la bonne résistance mécanique des assemblages par lamellation et par aboutage, nécessaires à la fabrication de poutres en bois lamellé-collé en climat tropical. Trois essences de bois abondantes de différentes densités ont été sélectionnées. Les adhésifs de types Mélamine-Urée-Formol et Résorcinol-Phénol-Formol ont été utilisées. Les paramètres de collage considérés sont : le grammage, le temps d’assemblage fermé et la pression.En utilisant les normes Européennes, plusieurs campagnes de tests ont été conduites sur des échantillons normalisés. Concernant le collage par lamellation, des tests élémentaires de délamination et de cisaillement des joints de colle ont été réalisés. Le test de délamination consiste en deux cycles d’immersion dans l’eau sous pression et de séchage, il induit de sévères variations d’humidité du bois susceptibles de créer des ouvertures des joints de colles. Le collage par aboutage est réalisé sur des poutres normalisées aboutées. Les entures sont obtenues grâce à un outillage standard communément utilisé pour les résineux. Les résultats ont mis en évidence l’influence des propriétés du bois et des paramètres de collage sur la résistance du joint et la résistance mécanique du produit. En effet, les paramètres du bois, tels que la densité, la rétractibilité et l’imprégnation, ont une forte influence sur le collage, en particulier sur la pression et le grammage nécessaires à la production d’un produit commercialisable. Il apparait qu’un bois de densité moyenne et poreux nécessite un grammage et une pression élevés comparé à un bois de densité élevée qui nécessite des valeurs moindres. Aussi, l’influence d’autres paramètres de fabrication, tels que le rabotage, l’encollage double face et simple face ainsi que l’épaisseur des lamelles, a été établie. Par contre il semblerait que le matériel communément utilisé pour l’aboutage des résineux n’est pas adapté aux feuillus tropicaux. En final, des paramètres de collage ont été validés pour la fabrication de lamellé-collé endémique en Guyane Française et une étude du coût de production d’une poutre lamellé-collé standard a identifié les conditions économiques d’une fabrication en Guyane Française.
A feasibility study of glued-laminated timber beams was carried out in French Guiana using local wood species. The aim of the study was to evaluate the gluing parameters that could ensure good mechanical properties for the manufactured glued-laminated beams in tropical climates. Three abundant wood species with different specific gravity were selected for the study. Melamine-Urea-Formaldehyde and Resorcinol-Phenol-Formaldehyde resins were used for gluing. The three gluing parameters considered are: adhesive spread rate, closing assembly time and gluing pressure.Using European standards, several laboratory tests were performed on normalized samples. The evaluation of a successful lamella’s gluing was done by using elementary tests of delamination and shearing. A delamination test consists of two cycles of water immersion at high pressure and drying which induces severe hygroscopic variation in wood thus causing joints opening. The finger-joints are made using a standard tool usually used for cutting softwoods. The performed tests revealed the influence of wood properties and the gluing parameters on the joint resistance and the mechanical properties of the product. Results show that wood properties such as specific gravity, shrinkage coefficient, and permeation, have a high degree of influence on the gluing step especially on the gluing pressure and on the adhesive spread rate needed to produce a commercial product. Furthermore, wood with medium specific gravity needs more adhesive and more pressure than the one with high specific gravity. Additionally, the effects of other manufacturing parameters, such as planning, double or simple side glue spreading and lamellae thicknesses, on the glue joint resistance were demonstrated. Finally, the common tools used for softwoods are not adapted to making the finger joints with tropical hardwoods.In conclusion, optimal gluing parameters for manufacturing glued-laminated timber beams in French Guiana were established and an economical study using standard glued-laminated timber beams revealed the economic conditions under which a successful manufacturing of these local beams can be implemented in French Guiana.

http://www.theses.fr/2011AGUY0484/document

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
Portable microbial samplers are useful for detecting microorganisms in the air. However, limited data are available on their performance when sampling airborne biological agents in a routine practice. We compared bacterial and fungal concentrations obtained in field conditions using three impactor samplers with different designs (AES Chemunex Sampl'Air, bioMérieux Air Ideal, and Sartorius AirPort MD8/BACTair). The linearity of mold collection was tested in the range of 100 L to 1000 L, and all the devices had a correlation coefficient higher than 0.95. For optimal comparison of the samplers, we performed experiments in different hospital rooms with varying levels of air biocontamination. Each sampling procedure was repeated to assess reproducibility. No significant difference between the samplers was observed for the mold concentrations on Sabouraud agar, whereas Sampl'Air collected significantly more bacteria on tryptic soy agar than Air Ideal or BACTair at one of the sites. Impactor location in the room was nevertheless associated with the variability observed with the three samplers at the highest microbial concentration levels. On the basis of their performance, autonomy and simplicity of use, these three impactors are suitable for routine indoor evaluation of microbial air contamination.
ISSN: 1545-9624

hal-00874614
https://hal.archives-ouvertes.fr/hal-00874614
DOI : 10.1080/15459624.2013.800955
PUBMED : 23799861