Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This paper presents a synthesis of a multidisciplinary study carried out along the Nîmes Roman aqueduct, located in the southeast part of France. The study was motivated by archaeologists attempting to explain the partial destructions of only one aerial bridge of the aqueduct (Pont de la Lône). Given its close proximity to the Nîmes seismically active fault, a possible seismic origin for the destructions was invoked. Seismologists and structural engineers thus carried out a variety of field and numerical investigations to test the seismic hypothesis. Supporting field evidence was found first along the aerial bridge section of the aqueduct: broken stalactites, arch warping, cracks and destruction of the bridge just above a breast wall shortly after its construction. Secondly, the underground part of the canal was analysed: irregularity in the thickness of calcite deposits of the canal walls, presence of numerous cracks, horizontal shift of the otherwise linear structure of the canal and presence of calcite twins in the deposits, found only where the canal crosses the Nîmes fault system. Numerical modelling and experimental results show that (1) only the Pont de la Lône would have suffered serious damage under seismic solicitation (assuming an M6 earthquake at 10 km distance). The second aerial bridge, the three levels arches Pont du Gard, an historical monument still standing today, would have suffered less damage, due to its very different fundamental frequency of around 0.4 Hz, far from the amplified seismic near-field spectrum; (2) the numerical models also show that a fall of the canal wall would require a higher magnitude event (M > 6); (3) the presence of calcite twinning requires a differential static stress of 4 MPa or greater, which can only be achieved very close to the fault rupture of a M > 6 earthquake; (4) finally, local surface rupturing of such a fault would also corroborate the hypothesis that the observed offset of the canal may be partly seismically induced. Although other possible origins for each individual evidence may not be excluded, the observed spatiotemporal concentration of architectural/geological anomalies together with the numerical results allow us to support a possible co-seismic origin for these disorders, indirectly attesting to the potential seismic activity (M > 6) of the nearby Nîmes fault. Furthermore, following the conclusions of archaeological studies, the disorders occurred between 250 and 350 year AD, thus providing timing for this possible seismic event, an essential parameter in seismic hazard analysis. These results validate the archaeo-seismological approach as a tool that may help improve the knowledge of major infrequent earthquakes in areas of moderate seismic activity.
ISSN: 0921-030X

hal-00379064
https://hal.archives-ouvertes.fr/hal-00379064
DOI : 10.1007/s11069-008-9276-9

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
Absolute M-shell x-ray production cross sections have been measured and calculated for Au and Bi for electron incident energies from close to the ionization threshold up to 38 keV. The experimental cross sections were deduced from M alpha x-ray intensities emitted from ultrathin Au and Bi samples deposited on self-supporting C films. The measurements were performed on an electron microprobe using several wavelength-dispersive spectrometers. The x-ray production cross sections were also evaluated theoretically using ionization cross sections calculated from the plane-wave and the distorted-wave Born approximations. Experimental results are compared with the calculated cross sections and also with the results of two analytical formulas widely used in many applications. Good agreement is found between the measured cross sections and the predictions from the distorted-wave Born approximation, which indicates that this approximation is suited for the calculation of M-shell ionization cross sections of heavy elements.
ISSN: 1050-2947

hal-00411432
https://hal.archives-ouvertes.fr/hal-00411432
DOI : 10.1103/PhysRevA.78.022704

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : HAL CCSD
Résumé : International audience
Some morphological and biochemical taxonomic markers are also affecting factors of dynamic mechanical properties of wood. Thus, could these properties reflect the classification/phylogeny of taxa? This work is a first insight into this question. It relied on the gathering (through experimental campaigns and exhaustive literature review) of a large database on the viscoelastic (i.e. including damping) vibrational properties of 445 woody species. relationship between damping was confirmed at a wide interspecific scale, but described no more than 40% of not in a way that could be easily related to the phylogenetic tree. Damping was a bit more -Papilionoideae and, to a lesser extent, Lauraceae, Cupressaceae and Moraceae) damping than average, independently While for some other families no clear characteristics could be observed at least with the present number of represented species. In the future, increasing the amount of data and compiling anatomical and chemical markers / affecting factors will allow further analysis at sub-family levels, and a better understanding of this wide topic.
6th Plant Biomechanics Conference PBM09
Cayenne, French Guiana

hal-00808398
https://hal.archives-ouvertes.fr/hal-00808398
https://hal.archives-ouvertes.fr/hal-00808398/document
https://hal.archives-ouvertes.fr/hal-00808398/file/Mechanical_damping_wood_Bremaud_al.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
It is classically admitted that the goodfriction properties of lamellar compounds are strongly related to their anisotropic structure and especially to the existence of weak interlayer interactions through the van der Waals gap separating the basal layers. As it is also known, the presence of the van der Waals gap in the structure of lamellar compounds will allow lot of chemical species to be intercalated in the structure leading both to the expansion of structure parameters and inter layer interactions modifications. The present work is concerned with the experimental and theoretical study of friction propertiesof Graphite Intercalated Compounds (GICs) in order to better understand thetribologiclamellar compounds. In order to modulate the interlayer interactions, two types of intercalated species were used, electrophylic species (AlCl3, FeCl3, SbCl5) and nucleophilic species (Li, K, Rb).
40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013
Lyon, France

Droits : info:eu-repo/semantics/OpenAccess
hal-00926509
https://hal.archives-ouvertes.fr/hal-00926509
https://hal.archives-ouvertes.fr/hal-00926509/document
https://hal.archives-ouvertes.fr/hal-00926509/file/Delbe_9781.pdf
OATAO : 9781

Éditeur(s) : HAL CCSD wiley
Résumé : International audience
The slow advance of a crack in sodo-silicate glasses was studied at nanometer scale by in-situ atomic force microscopy (AFM) in a well-controlled atmosphere (N2 and H2O). An enhanced diffusion of sodium ions in the stress-gradient field at the sub-micrometric vicinity of the crack tip was revealed through several effects: growth of nodules in height images, changes in the AFM tip–sample energy dissipation as detected in phase images. Ex-situ chemical micro-analyses completed the AFM measurements. The nodules patterns revealed a dewetting phenomenon evidenced by “breath figures”, i.e. analog to the fogging that occurs when a vapour condenses onto a 'cold' surface [D. Beysens et al., Phys. Rev. Let. 57, 1433 (1986)]. These experimental results were explained by a two-step process: i) a fast migration of sodium ions towards the fracture surfaces as proposed by Langford et al. [J. Mat. Res. 6, 1358 (1991)], ii) a slow backwards diffusion of the cations as evidenced in these AFM experiments (typical time: few minutes). Measurements of the diffusion coefficient of that relaxing process were done at room temperature. Our results strengthen the theoretical concept of a near-surface structural relaxation due to the stress-gradient at the vicinity of the crack tip. Raman and SIMS studies revealed that nodules – for samples studied after exposition to common air - are preferentially covered by an organic overlayer of a carboxylate salt with a long aliphatic chain. The catalytic role of sodium ions in that chemical process is suspected.
Fractography of glasses an ceramics V
Rochester, United States

hal-00408605
https://hal.archives-ouvertes.fr/hal-00408605

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
The effect of trace concentrations of Ti on the rate and mechanism of hydrogen diffusion in pure forsterite was investigated experimentally. Forsterite doped with 350–400 ppm Ti (predominantly octahedral Ti3+, minor tetrahedral Ti4+) was prepared by diffusing Ti into pure synthetic forsterite at high temperature (1500 °C), very low oxygen fugacity (~QFM-5) at atmospheric pressure. The Ti-doped forsterite was then diffusively hydroxylated in a piston-cylinder apparatus at much lower temperatures (650–1000 °C) and higher oxygen fugacities, at 1.5–2.5 GPa, with chemical activities buffered by forsterite-enstatite or forsterite-periclase and partial pressure of H2O equal to total pressure. This produced hydrogen concentration-distance profiles of several hundred micrometers in length. Diffusion of hydrogen through the Ti-doped forsterite, even at very high Embedded Image , does not lead to redox re-equilibration of the high Ti3+/ΣTi ratio set during the synthesis of the starting material at extremely reducing conditions—the metastable point defects are partially preserved.Three main hydroxylated point defects are observed; hydroxyl is associated with Ti4+ (titano-clinohumite point defects), Ti3+ (and possibly other trivalent cations), and M-site vacancies. Concentration-distance profiles represent an interplay between diffusion and reaction (i.e., site rearrangement) to form the observed point defects. In all experiments, the concentration-distance profiles of the hydroxylated Ti defects coincide with the concentration-distance profiles of the M-site vacancy substitution, with the same crystallographic anisotropy. This suggests that the macroscopic movement of hydrogen through the crystal is due to one diffusion mechanism (the diffusion of hydroxylated M-site vacancies). The net H diffusion coefficient [logD(ΣH)], between 650–1000 °C, is Embedded Image where the values of logD0(ΣH) parallel to [100] and [001] directions are −3.0 ± 0.4 and −2.2 ± 0.4, respectively; diffusion is therefore around one order of magnitude faster along the c axis than along the a axis. The diffusion of hydrogen is slightly faster in Ti-doped forsterite than in pure forsterite. There is no effect of chemical activity or oxygen fugacity on the rate of diffusion. Hydrogen diffusion profiles represent a complex interplay between the movement of H through the crystal lattice and point-defect reactions to maintain charge balance.
ISSN: 0003-004X

hal-01467402
https://hal.archives-ouvertes.fr/hal-01467402
DOI : 10.2138/am-2016-55681571

Éditeur(s) : HAL CCSD
Résumé : LPSC14037
Scientific data collected with modern sensors or dedicated detectors exceed very often the perimeter of the initial scientific design. These data are obtained more and more frequently with large material and human efforts. A large class of scientific experiments are in fact unique because of their large scale, with very small chances to be repeated and to superseded by new experiments in the same domain: for instance high energy physics and astrophysics experiments involve multi-annual developments and a simple duplication of efforts in order to reproduce old data is simply not affordable. Other scientific experiments are in fact unique by nature: earth science, medical sciences etc. since the collected data is "time-stamped" and thereby non-reproducible by new experiments or observations. In addition, scientific data collection increased dramatically in the recent years, participating to the so-called "data deluge" and inviting for common reflection in the context of "big data" investigations. The new knowledge obtained using these data should be preserved long term such that the access and the re-use are made possible and lead to an enhancement of the initial investment. Data observatories, based on open access policies and coupled with multi-disciplinary techniques for indexing and mining may lead to truly new paradigms in science. It is therefore of outmost importance to pursue a coherent and vigorous approach to preserve the scientific data at long term. The preservation remains nevertheless a challenge due to the complexity of the data structure, the fragility of the custom-made software environments as well as the lack of rigorous approaches in workflows and algorithms. To address this challenge, the PREDON project has been initiated in France in 2012 within the MASTODONS program: a Big Data scientific challenge, initiated and supported by the Interdisciplinary Mission of the National Centre for Scientific Research (CNRS). PREDON is a study group formed by researchers from different disciplines and institutes. Several meetings and workshops lead to a rich exchange in ideas, paradigms and methods. The present document includes contributions of the participants to the PREDON Study Group, as well as invited papers, related to the scientific case, methodology and technology. This document should be read as a "facts finding" resource pointing to a concrete and significant scientific interest for long term research data preservation, as well as to cutting edge methods and technologies to achieve this goal. A sustained, coherent and long term action in the area of scientific data preservation would be highly beneficial.
http://hal.in2p3.fr/in2p3-00959072

in2p3-00959072
http://hal.in2p3.fr/in2p3-00959072
http://hal.in2p3.fr/in2p3-00959072/document
http://hal.in2p3.fr/in2p3-00959072/file/PREDON_Scientific_Data_Preservation_2014.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Four fibers from banana-trees (leaf, trunk) and coconut-tree (husk, fabric) were examined before their incorporation in cementitious matrices, in order to prepare insulating material for construction. Their botanical compositions have been determined following a method described previously. Thermal degradation of these fibers were studied between 200 and 700 °C under nitrogen gas flow. Temperature of pyrolysis was the experimental parameter investigated. The solid residues obtained were analyzed by classical elemental analysis, Fourier Transform Infra Red (FTIR) spectroscopy and were observed by Scanning Electron Microscopy (SEM). This study has shown (1) the relation between botanical, chemical composition with both localization of fibers in the tree and type of tree; (2) the rapid and preferential decomposition of banana fibers with increasing temperature of pyrolysis and (3) the rough samples are made of hollow fibers.
ISSN: 0960-8524

hal-00809780
https://hal.univ-antilles.fr/hal-00809780
DOI : 10.1016/j.biortech.2005.11.030

Éditeur(s) : HAL CCSD
Résumé : The main purpose of this thesis was to characterize and to model the hydrodynamic and thermochemical processes leading to the alteration of the wellbore cement materials under borehole conditions. Percolation experiments were performed on fractured cement samples under CO2 storage conditions (60°C and 10MPa). Injection flow rate was dictated by the fracture aperture of each sample. CO2 enriched brine was flowed along the fracture aperture, and permeability changes as well as chemical evolution of major cations were continuously acquired during the experiment time. Reaction paths developed by the alteration of the cement were characterized using microtomography and ESEM images. The experiments conducted using samples presenting large fracture apertures during 5h showed that permeability was maintained constant during the experiment time. Three reacted layers were displaying by the alteration of portlandite and CSH. Long term experiment (26h) conducted with large initial fracture aperture showed a decrease of the permeability after 15hours of CO2 exposure. Otherwise, experiments performed on samples presenting narrow apertures indicated the conversion of portlandite and CSH to calcite leading to the permeability reduction and the fracture clogging. Assemblages of phases and chemical changes were modelled using GEMS-PSI speciation code. We studied also using a coupled transport-reactive model the conditions leading to the cement alteration and the formation of associated layers.
L'objectif de cette thèse était de modéliser à partir des expériences de percolation-réactive, les processus hydrodynamique et réactionnel qui gouvernent l'altération des ciments de puits. Différentes expériences ont été réalisées dans des conditions représentatives de celles du stockage du CO2. Des échantillons fracturés ont été utilisés pour injecter une saumure enrichie en CO2 à 60°C et 10MPa et à différentes pressions partielles de CO2. Le débitd'injection variait en fonction des propriétés hydrauliques de l'échantillon exposé. L'injection d'une saumure enrichie en CO2 à débit constant à travers une fracture supposée plane a permis d'étudier les modifications des propriétés hydrodynamiques et ces conséquences sur la géochimie et la microstructure du ciment altéré. L'impact dynamique de l'évolution microstructurale a été mis en évidence. Les expériences conduites sur des échantillons présentant de larges ouvertures, réalisées sur une durée de 5 h, ont montré que la perméabilité était maintenue constante le long de l'expérience. Trois couches d'altération se sont développées consécutivement à la dissolution de la portlandite et la décalcification des CSH. L'altération a entrainé la précipitation des carbonates et de la silice amorphe à proximité de la fracture. Dans le cas d'une expérience longue durée appliquant les mêmes conditions que précédemment on a observé que la croissance de la silice amorphe a entrainé la diminution de la perméabilité. Par ailleurs les expériences effectuées sur des échantillons présentant de faibles ouvertures, ont indiqué que la conversion de la portlandite en calcite conduit au colmatage de la fracture. L'évolution des assemblages de phases conduisant à la formation des carbonates et de la silice amorphe a été modélisée à partir du code géochimique GEMS. Les mécanismes de diffusion et les processus de mise en place des couches d'altération ont été étudiés à partir d'un modèle analytique et d'un modèle de transport réactif à partir du code géochimique PHREEQC.
https://tel.archives-ouvertes.fr/tel-01038034

tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034/document
https://tel.archives-ouvertes.fr/tel-01038034/file/theseabdoulghafour.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
BACKGROUND: Semi Volatile Organic Compounds (SVOCs) are contaminants commonly found in dwellings as a result of their use as plasticizers, flame retardants, or pesticides in building materials and consumer products. Many SVOCs are suspected of being neurotoxic, based on mammal experimentation (impairment of locomotor activity, spatial learning/memory or behavioral changes), raising the question of cumulative risk assessment. The aim of this work is to estimate the relative toxicity of such SVOCs, based on neuronal death. METHOD: SVOCs fulfilling the following conditions were included: detection frequency >10% in dwellings, availability of data on effects or mechanism of action for neurotoxicity, and availability of dose-response relationships based on cell viability assays as a proxy of neuronal death. Benchmark concentration values (BMC) were estimated using a Hill model, and compared to assess relative toxicity. RESULTS: Of the 58 SVOCs selected, 28 were suspected of being neurotoxic in mammals, and 21 have been documented as inducing a decrease in cell viability in vitro. 13 have at least one dose-response relationship that can be used to derive a BMC based on a 10% fall in neuronal viability. Based on this in vitro endpoint, PCB-153 appeared to be the most toxic compound, having the lowest BMC10 (0.072μM) and diazinon the least toxic compound, having the highest BMC10 (94.35μM). We showed that experimental designs (in particular choice of cell lines) had a significant influence on BMC calculation. CONCLUSION: For the first time, the relative in vitro toxicity of 13 indoor contaminants belonging to different chemical families has been assessed on the basis of neuronal cell viability. Lack of comparable toxicity datasets limits the number of SVOCs that can be included. More standardized protocols in terms of cell lines, species and exposure duration should be developed with a view to cumulative risk assessment.
Toxicology Letters

hal-01579605
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01579605
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01579605/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01579605/file/Fournier%20et%20al.%20-%20Relative%20toxicity%20for%20indoor%20semi%20volatile%20organic.pdf
DOI : 10.1016/j.toxlet.2017.07.875

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Torsion experiments (inline image =3 × 10−4 s−1) were performed to investigate the large strain (γmax = 15) rheology on quartz-muscovite aggregate as analogue to pelitic rocks undergoing melting and crystallization during deformation at 300 MPa confining pressure and 750°C temperature. Microstructures reveal four distinct but gradational stages of crystal-melt interactions during deformation--(a) solid state deformation, (b) initiation and domination of partial melting, (c) simultaneous partial melting and crystallization, and (d) domination of crystallization. The microstructural stages are linked to the rheology of the deforming samples. Partial melting starts at relatively low finite shear strains (γ = 1-3) showing approximately 60% strain softening. At γ = 4-10 the partially molten bulk material shows a steady state flow at low stress. Further crystallization of new crystals at the expense of melt between γ = 10 and 15 causes weak strain hardening until the material fails by developing brittle fractures. The stress exponent (n), calculated at γ = 1, 5, and 10, increases from ∼ 3 to ∼ 43, indicating a transition from power to power law breakdown or exponential flow of the bulk system. Hydrostatic experiments for equivalent times and conditions of the torsion experiments were also conducted to evaluate the reaction kinetics and microstructures under static conditions. The new experimental data establish that partially molten rock does not flow according to a constant strain rate-dependent power law (steady state) rheology. The rheological transition from strain rate sensitive to strain rate insensitive flow is interpreted as a function of melt-crystal ratio, their mutual interactions, and the evolution of microstructures in the partially molten rock.
ISSN: 0148-0227

hal-01053709
https://hal.archives-ouvertes.fr/hal-01053709
DOI : 10.1002/2013JB010777

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
The vibration damping coefficient (tanδ) of wood is an important property for acoustical uses, including musical instruments. Current difficulties in the availability of some of the preferred species call for diversification, but this comes up against the lack of systematic damping coefficient data. * Keeping in mind the possible factors affecting tanδ, could we predict its variations between species, by using indicators that are either easily measured and/or readily available for many species? * Vibrational properties, equilibrium moisture content and colorimetric parameters were assessed on 94 wood types belonging to 76 species. Experimental results were then related to data on chemical contents and physical properties from the CIRAD database. The "standard" relationship between tanδ and specific modulus of elasticity (E'/ρ) explained only half of the variations. Deviations from this trend were correlated to extractives content, yet effects were not directly quantitative. Damping deviations were also correlated to colour and moisture-related properties, especially so with fibre saturation point. * By taking into account a combination of moisture-related properties, colour - or extractives content, and the "standard" relationship between tanδ and E'/ρ, we could propose simple predictive models which explain up to 89% of observed variations in tanδ between 48 species.
ISSN: 1286-4560

hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338/document
https://hal.archives-ouvertes.fr/hal-00808338/file/Physico-chemical_indicators_Bremaud_al.pdf
DOI : 10.1051/forest/2010032

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Numerous archeomagnetic studies have provided high quality data for both the direction and the intensity of the geomagnetic field, essentially in Europe for the last 10 millennia. In particular, Greece supplies a lot of archeological materials due to its impressive cultural heritage and volcanic activity, so that numerous data have been obtained from burnt clays or historical lava flows. The most recent Greek secular variation curves are available for the last 8 millennia for the intensity and the last 6 millennia for the direction. Nevertheless, the coverage still presents several gaps for periods older than 2500 BC. In an effort to complete the Greek curve and extend it to older times, we present the archeointensity results from three Neolithic settlements in Northern Greece. The samples are of two different natures: burnt structures from Avgi (5250 ± 150 BC) and Vasili (4800 ± 200 BC), as well as ceramics from Dikili Tash (4830 ± 80 BC) and Vasili (4750 ± 250 BC). The samples have been subjected to standard rock magnetic analyses in order to estimate the thermal stability and the domain state of the magnetic carriers before archeointensity measurements. Surprisingly, very few ceramic samples provided reliable archeointensities whereas samples from burnt structures presented a very good success rate. Complementary studies showed that a detailed examination of the matrix color, following archeological information and classification standards can be a decisive test for pre-selection of sherds. In spite of these unsuccessful measurements from ceramics, we obtained an intensity value of 73.5 ± 1.1 μT for Dikili Tash, a higher value than the other data obtained in the same area, during the same period. However we do not have evidences for a technical artefact during the experiment. The burnt structures yielded two reliable archeointensities of 36.1 ± 1.8 μT and 46.6 ± 3.4 μT for Avgi and Vasili, respectively. Finally, we achieved a new archeomagnetic dating for these sites by comparing these new archeointensity values, combined to the directional measurements already published, with the Bulgarian secular variation curve. These new results contribute to extend the Greek secular variation reference curve towards older periods.
ISSN: 0031-9201

hal-00805575
https://hal.archives-ouvertes.fr/hal-00805575
DOI : 10.1016/j.pepi.2012.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : Water molecules play a fundamental role in the physics of slow crack propagation in glasses. It is commonly understood that, during stress-corrosion, water molecules that move in the crack cavity effectively reduce the bond strength at the strained crack tip and, thus, support crack propagation. Yet the details of the environmental condition at the crack tip in moist air are not well determined. In a previous work, we reported direct evidence of the presence of a 100 nm long liquid condensate at the crack tip in fused silica glass during very slow crack propagation (10(-9)-10(-10) m/s). These observations are based on in situ AFM phase imaging techniques applied on DCDC glass specimens in controlled atmosphere. Here, we discuss the physical origin of the AFM phase contrast between the liquid condensate and the glass surface in relation to tip-sample adhesion induced by capillary bridges. We then report new experimental data on the water condensation length increase with relative humidity in the atmosphere. The measured condensation lengths were much larger than what predicted using the Kelvin equation and expected geometry of the crack tip.
ISSN: 0022-3093

hal-00412153
https://hal.archives-ouvertes.fr/hal-00412153
DOI : 10.1016/j.jnoncrysol.2007.06.090

Éditeur(s) : HAL CCSD Taylor & Francis: STM, Behavioural Science and Public Health Titles
Résumé : International audience
The dislocation microstructures in a single crystal of olivine deformed experimentally in uniaxial compression at 1090 °C and under a confining pressure of 300 MPa, have been investigated by transmission electron tomography in order to better understand deformation mechanisms at the microscale relevant for lithospheric mantle deformations. Investigation by electron tomography reveals microstructures, which are more complex than previously described, composed of and dislocations commonly exhibiting 3D configurations. Numerous mechanisms such as climb, cross-slip, double cross-slip as well as interactions like junction formations and collinear annihilations are the source of this complexity. The diversity observed advocates for microscale deformation of olivine significantly less simple than classic dislocation creep reported in metals or ice close to melting temperature. Deciphering mechanism of hardening in olivine at temperatures where ionic diffusion is slow and is then expected to play very little role is crucial to better understand and thus model deformation at larger scale and at temperatures (900–1100 °C) highly relevant for the lithospheric mantle.
ISSN: 1478-6443

hal-01667146
https://hal.archives-ouvertes.fr/hal-01667146
DOI : 10.1080/14786435.2017.1367858

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction infancy corresponds to the first few million years following subduction initiation, when slabs start their descent into the mantle. It coincides with the transient (yet systematic) transfer of material from the top of the slab to the upper plate, as witnessed by metamorphic soles welded beneath obducted ophiolites. Combining structure–lithology–pressure–temperature–time data from metamorphic soles with flow laws derived from experimental rock mechanics, this study highlights two main successive rheological switches across the subduction interface (mantle wedge vs. basalts, then mantle wedge vs. sediments; at ∼800 °C and ∼600 °C, respectively), during which interplate mechanical coupling is maximized by the existence of transiently similar rheologies across the plate contact. We propose that these rheological switches hinder slab penetration and are responsible for slicing the top of the slab and welding crustal pieces (high- then low-temperature metamorphic soles) to the base of the mantle wedge during subduction infancy. This mechanism has implications for the rheological properties of the crust and mantle (and for transient episodes of accretion/exhumation of HP-LT rocks in mature subduction systems) and highlights the role of fluids in enabling subduction to overcome the early resistance to slab penetration.
ISSN: 0012-821X

hal-01383368
http://hal.upmc.fr/hal-01383368
http://hal.upmc.fr/hal-01383368/document
http://hal.upmc.fr/hal-01383368/file/Agard_2016_Plate_interface.pdf
DOI : 10.1016/j.epsl.2016.06.054

Éditeur(s) : HAL CCSD Pergamon
Résumé : This paper presents an experimental study of the deformation of Beaucaire marl subjected to drained triaxial tests under a wide range of confining pressure. Several methods of observation have been used: X-ray computed tomography, scanning electronic microscopy, quantitative image analysis of thin sections and mercury porosimetry. The analysis at the grain scale shows the existence of various deformation modes depending on the mean stress level. These modes are classified with reference to the brittle and ductile regimes. In specimens deformed under low confining pressure, macro-cracks are localised in a band more contracting than the rest of the specimen. In specimens deformed under moderate confining pressure, a series of micro-scale shear bands characterised by a grain re-orientation towards the direction of macro-shear is detected in the zones of localised deformation. The material in between the micro-scale shear bands is contracting more than the rest of the specimen in some cases; in other cases, a schistosity is detected also in the rest of the specimen outside the localisation zones. In the specimen deformed under high confining pressure, no localisation occurs, and a schistosity is observable throughout the specimen.
ISSN: 1365-1609

hal-00411208
https://hal.archives-ouvertes.fr/hal-00411208
DOI : 10.1016/j.ijrmms.2007.08.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Mantle flow involves large strains of polymineral aggregates. The strongly anisotropic plastic response of each individual grain in the aggregate results from the interactions between neighbouring grains and the continuity of material displacement across the grain boundaries. Orthorhombic olivine, which is the dominant mineral phase of the Earth's upper mantle, does not exhibit enough slip systems to accommodate a general deformation state by intracrystalline slip without inducing damage. Here we show that a more general description of the deformation process that includes the motion of rotational defects referred to as disclinations can solve the olivine deformation paradox. We use high-resolution electron backscattering diffraction (EBSD) maps of deformed olivine aggregates to resolve the disclinations. The disclinations are found to decorate grain boundaries in olivine samples deformed experimentally and in nature. We present a disclination-based model of a high-angle tilt boundary in olivine, which demonstrates that an applied shear induces grain-boundary migration through disclination motion. This new approach clarifies grain-boundary-mediated plasticity in polycrystalline aggregates. By providing the missing mechanism for describing plastic flow in olivine, this work will permit multiscale modelling of the rheology of the upper mantle, from the atomic scale to the scale of the flow.
ISSN: 0028-0836

hal-01054315
https://hal.archives-ouvertes.fr/hal-01054315
DOI : 10.1038/nature13043