Éditeur(s) : Actes de colloques Ifremer, Tahiti, French Polynesia, 20 Feb - 4 Mar 1989, n°9, chap. 52, pp.543-557
Résumé : The Polynesian grouper, Epinephelus microdon , was chosen as an experimental model in order to investigate about factors controlling sexuality in groupers.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1989/acte-1439.pdf
http://archimer.ifremer.fr/doc/00000/1439/

Éditeur(s) : HAL CCSD
Résumé : International audience
Résumé : La prise en compte du plurilinguisme et des langues des élèves dans le système éducatif français est un véritable enjeu sociétal auquel l’école est confrontée. Entre les langues vivantes régionales, étrangères et celles issues de l’immigration, que fait concrètement l’école pour prendre en considération la diversité linguistique des élèves et des contextes d’enseignement ? Entre un enseignement conduit exclusivement dans une langue, des espaces spécifiques octroyées à certaines langues et des approches dites plurielles (Candelier, 2008), l’école propose différents dispositifs et conceptions de gestion du plurilinguisme, tels que le CASNAV (Centre Académique pour la Scolarisation des enfants Allophones Nouvellement Arrivés et des enfants issus de familles itinérantes et de Voyageurs), les cours de langues vivantes étrangères et régionales, les classes bilingues ou les sections européennes pour ne citer que ceux-là. Dans le contexte éducatif actuel où les différents acteurs (enseignants, inspecteurs, élèves, parents) oscillent entre plusieurs idéologies linguistiques allant du monolinguisme imposé au plurilinguisme, de l’égalité à l’inégalité des langues, du maintien de la diversité linguistique à sa disparition (Armand, 2016), nous présentons deux expérimentations auxquelles nous avons participé. Le premier concerne le dispositif de classes bilingues français-créole mis en place à partir de 2012 à l’école primaire en Guadeloupe. Le second dispositif est une recherche-action-formation menée en 2014 avec les enseignants des classes bilingues sur la co-construction de démarches portfolio contextualisées. Ces deux expérimentations tentent d’articuler l’utilisation des langues et la prise en compte du bi-plurilinguisme dans le but d’atteindre les différents objectifs nationaux fixés par les programmes scolaires en vigueur. En nous appuyons sur ces deux expériences, nous proposons des pistes de réflexion visant une approche didactique contextuelle du plurilinguisme en éducation et en formation. Cette dernière s’appuie, d’une part, sur trois principes en lien avec les classes bilingues : un contrat de communication de type linguistique, une trifocalisation de l’alternance codique et une rhétorique polylectale (Anciaux, 2016), et d’autre part, sur des diverses activités autour des biographies langagières et du rapport aux langues développés dans le cadre de démarches portfolio plurilingues.Références bibliographiques : Anciaux, F. (2016). L’enseignement bilingue français-créole à l’école primaire en Guadeloupe. Dans C. Hélot et J. Erfurt (dir.), L’éducation bilingue en France. Politiques linguistiques, modèles et pratiques (p. 52-65). Limoge : Lambert-Lucas.Armand, F. (2016). L’enseignement du français en contexte de diversité linguistique au Québec : idéologies linguistiques et exemples de pratique en salle de classe. Dans M. Potvin, M.O. Magna et J. Larochelle-Audet (dir.), La diversité ethnoculturelle, religieuse et linguistique en éducation. Théorie et pratique (p. 172-182). Montréal : Fides Éducation.Candelier, M. (2008). Approches plurielles, didactiques du plurilinguisme : le même et l’autre. Les cahiers de l’ACEDLE, 5(1), 65-90.Molinié, M. (dir.) (2011). Démarches portfolio en didactique des langues et des cultures. Enjeux de formation par la recherche-action. CRTF. Amiens : Encrages Belles Lettres.
31ème Colloque de la FLAREP intitulé « Quand l’École délie ses langues : défi et atouts guyanais »
Cayenne, French Guiana

hal-01624849
https://hal.univ-antilles.fr/hal-01624849

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. The Before-After Control-Impact Paired Series (BACIPS) design distinguishes natural spatial and temporalvariability from variation induced by an environmental impact (or intervention) of interest. BACIPS is a powerfultool to derive inferences about interventions when classic experimental approaches (e.g. which rely on spatialreplicates and random assignment of treatments) are not feasible or desirable. Previously applied BACIPSdesigns generally assume that effects are sudden, constant and long-lived: that is, that systems exhibit ‘stepchanges’in response to interventions. However, complex ecological interactions or gradual interventions maycreate delayed and/or progressive responses, potentially impeding the reliability of classic (step-change) analyses.2. We propose a novel approach, the Progressive-Change BACIPS, which generalizes and expands the scope ofBACIPS analyses.We evaluate the relative performance of this approach using both simulated and real data thatexhibit step-change, linear, asymptotic and sigmoid responses following an intervention.We quantify the statisticalpower and accuracy of the Progressive-Change BACIPS under varying initial population densities, intensityof spatial sampling, effect sizes and number of sampling dates After the intervention.3. We show that Progressive-Change BACIPS identified the correct model among the set of candidate modelsunder most conditions and led to accurate estimates of the parameters that were used to generate the simulateddata. When data were sparse, and the dynamics complex, simpler (more parsimonious) models were favouredover the more complex models that actually generated the simulated data. Application of the Progressive-Change BACIPS to existing data sets from the literature led to strong support for specific models (over alternatives)and led to more specific inferences than possible under the classic BACIPS approach.4. The Progressive-Change BACIPS proposed here is more flexible than the original BACIPS formulationbecause the data are used to inform the form of the final model, rather than having the form of the modelimposed on the data. This leads to better estimates of the effects of environmental impacts and the time-scalesover which they operate. As a result, the Progressive-Change BACIPS should be applicable to a wide range ofstudies and should help improve investigation of time-dependent effects. R code to perform Progressive-ChangeBACIPS analysis is provided.
ISSN: 2041-210X

hal-01416668
https://hal-univ-perp.archives-ouvertes.fr/hal-01416668
DOI : 10.1111/2041-210X.12655

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Porous thin films considered for applications like separation, sensing and microelectronic have to sustain mechanical stresses during their integration process or in working conditions. Thanks to recent progress in processing methods, it is now possible to precisely control the porosity and combine ordered mesopores with randomly-distributed macropores to achieve hierarchically porous materials. The mechanical properties of thin films containing different types of porosity (ordered meso, random macro and hierarchical) have been investigated by means of nanoindentation. In particular a method recently proposed by Li and Vlassak (H. Li, J.J. Vlassak, Journal of Materials Research 24 (2009) 1114-1126) is applied to account for the substrate effect. Residual indent impressions were imaged by Atomic Force Microscopy (AFM) to provide some insights in the mechanical behavior of the films. In addition, experimental indentation moduli are compared to theoretical predictions obtained via Finite Element (FE) analysis. The different porous structures have been modeled by FE to obtain the effective elastic properties from which the indentation modulus can be inferred. Finally, the experimental-model differences are discussed. © 2010 Elsevier Inc. All rights reserved.
ISSN: 1387-1811

hal-01683194
https://hal.univ-antilles.fr/hal-01683194
DOI : 10.1016/j.micromeso.2010.09.004

Éditeur(s) : HAL CCSD Universidad de Malaga
Résumé : International audience
The development of information systems follows a long and complex process in which various actors are involved. We report an experiment in which we observe the evolution of the analysis model of an information system through 15 successive versions. We use indicators on the underlying concept lattices built by applying Relational Concept Analysis (RCA) to each version. RCA is an extension of FCA which groups entities based on characteristics they share, including links to other entities. It here helps in analyzing their evolution. From this experience, we establish recommendations to monitor and verify the proper evolution of the analysis process.
CLA'2012: 9th International Conference on Concept Lattices and Applications
Fuengirola (Málaga), Spain

ISBN : 978-84-695-5252-0
lirmm-00743886
http://hal-lirmm.ccsd.cnrs.fr/lirmm-00743886
http://hal-lirmm.ccsd.cnrs.fr/lirmm-00743886/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
We report here U-series and trace element data for an olivine-melilitite lava flow, erupted in 1957 in the Virunga volcanic field and known as the Mugogo eruption. Petrological and geochemical data show that the Mugogo magma represents a primary mantle melt, derived from a low degree of melting of a metasomatised mantle source. It is highly enriched in very incompatible trace elements (e.g. more than 300-fold compared to primitive mantle for Th), with a distinctly lower enrichment in Rb, Ba and Sr. The high Th/U and low (230Th/232Th) ratios (4.4 and 0.750, respectively, with a (230Th/238U) ratio of 1.09) are close to the values found for the Nyamuragira basanites. But the most striking feature is the very low (226Ra/230Th) ratio of 0.48, the lowest ever measured in a mafic volcanic rock. The most probable origin of this Ra deficit is the presence of phlogopite (having a high Ra partition coefficient) in the lithospheric mantle, either as a residual phase during low-degree isobaric melting (in batch-melting or a diffusion-controlled melting models), or in a phlogopite-bearing upper mantle through which the melt migrates and equilibrates (in an equilibrium porous flow model commonly used to describe adiabatic melting). The disequilibrium pattern (230Th) > (238U) > (210Pb) ≫ (226Ra), reversed compared to the pattern observed in the Oldoinyo Lengai natrocarbonatite, suggests that a carbonatite melt might have been involved to explain the Ra deficit. We thus discuss the possibility of an early separation of a Ra-enriched carbonate melt either from the olivine-melilitite melt or from a carbonated mantle source, followed by the production of a low-degree melt of olivine-melilitite composition, but the lack of available experimental, petrological and geochemical evidences makes this process somewhat speculative at present. Further studies of recent (<5 ky) olivine-melilitites are needed to check whether the large Ra deficit is a general characteristic of this type of magma that can be used to constrain models of its formation.
ISSN: 0010-7999

hal-01174173
https://hal.archives-ouvertes.fr/hal-01174173
DOI : 10.1007/s00410-015-1124-9

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The complex electrical impedance of a garnet-biotite-sillimanite residual enclave in the Neogene dacite of El Hoyazo (SE Spain) has been determined up to 978 °C at 200-300 MPa. This well studied material represents a direct sampling of the Alborán Domain thinned lower crust undergoing partial melting. The paragenesis is garnet + biotite + sillimanite + plagioclase + graphite ± cordierite coexisting with widespread (~ 10 wt.%) rhyolitic melt occurring as inclusions and interstitial glass and developed during regional anatexis at 850 ± 50 °C and 500-700 MPa. The samples were used in cyclic measurements consisting in heating-cooling ramps at progressively higher maximum temperature to observe the effect of reactions on conductivity. In the first cycle up to 850 °C at 2-3 kbar, re-melting of the interstitial glass is achieved with no additional reactions and logarithmic conductivity (S/m) is up to − 1.5. At T > 950 °C new melt with orthopyroxene + ilmenite is produced from biotite partial breakdown and the logarithmic conductivity (S/m) is up to − 0.7. Application of mixing models as Hashin-Shtrikman bounds or Archie's Law, shows that once interconnected, melt controls the electrical conductivity of the enclave. The electrical conductivity of the rock can be simulated with the electrical conductivity data obtained on the starting Matrix glass of the enclave and with the new melt. Our experimental results obtained on a graphitic metasedimentary material evidence show that graphite does not contribute to the conductivity enhancement and that the electrical anomaly observed below the Betics can be explained as effect of partial melting of a residual crust. Comparison with previous works on mafic granulites shows that similar conductivity values can be achieved both by melting of a residual felsic crust or by melting of mafic materials and suggests that pelitic rocks can be more common at deep levels than expected.
ISSN: 0040-1951

hal-00823063
https://hal.archives-ouvertes.fr/hal-00823063
DOI : 10.1016/j.tecto.2012.11.003

Éditeur(s) : HAL CCSD Springer International Publishing
Résumé : The intensive farming practices that have been developed over the past 60 years are based mainly on the use of chemical inputs such as fertilisers and pesticides, mechanical tillage and monoculture. The limitations of these methods are now clear: long-term degradation of soil fertility, impacts on the environment and human health, high consumption of fossil fuels, low efficiency of inputs and threats to food security in a context of climate change. Would farming practices that rely on the activation of ecological processes be an alternative to achieve a balance between high productivity and environmental preservation? While many studies suggest a positive relationship between soil biodiversity and ecosystem services, there is considerable debate on the form such agricultural systems should take. This study reviewed the state of current knowledge and identified aspects requiring further research to achieve the aim of sustainable intensification of agriculture. The following major points emerged: 1) Most studies focused on the evaluation of individual practices. However, changes in farmers’ cropping practices to take advantage of soil biodiversity services would need to manage not only the interactions between various practices but also the trade-off between the technical and socio economic constraints of cropping systems. Advances in agricultural system design approaches may help to ensure appropriate trade-offs. 2) More attention should be given to drawing on knowledge from different sources: laboratory studies focusing on the ecological functions of soil biodiversity, experimental surveys on farmers’ fields to rank the farming practices and processes to be included in site-specific models, and on- station experiments to test hypotheses and acquire additional reference material. 3) Whereas advances in technical and scientific knowledge provide an increasing number of relevant indicators for characterizing biodiversity and ecological functions, studies are rarely targeted at the development of indicators that are accessible to farmers or their technical advisors. The lack of indicators accessible to grassroots players for evaluating the impacts of their decisions on soil biodiversity remains a serious obstacle to the development of innovative agro-ecological systems.
Sustainable Agriculture Reviews 14

ISBN : 978-3-319-06015-6
hal-01268743
https://hal.archives-ouvertes.fr/hal-01268743
DOI : 10.1007/978-3-319-06016-3_5
PRODINRA : 270786

Éditeur(s) : Gauthier-Villars
Résumé : This review provides a brief update of the occurrence and adaptive significance of asexual reproduction in echinoderms. It then focuses on the state of knowledge of biotic and abiotic factors that influence asexual processes in this group, particularly factors that may play a role in regulating the expression and relative proportion of asexual versus sexual phenotypes within populations of species, as well as factors modulating and triggering asexual processes. The information presented in the review is synthesized into the form of a basic model depicting how environmental factors may interact with physiological factors to regulate asexual reproduction in echinoderms, and to show how such regulatory processes may parallel in some ways those known to regulate sexual reproduction. Since the model is based mainly on correlational evidence derived from comparative field observations, a number of experimental approaches for testing the predictions of the model are discussed briefly.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1996 , Vol. 19 , N. 3-4 , P. 227-235

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00094/20481/18151.pdf
http://archimer.ifremer.fr/doc/00094/20481/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : HAL CCSD Elsevier
Résumé : This paper presents a numerical investigation on the mechanical behavior of cemented granular materials by means of discrete element simulations. In particular, two conceptual elements of this behavior were explored: the yield surfaces and the plastic potentials, as defined in the framework of elastoplastic constitutive models. For this purpose, we implemented a contact model that mimics the mechanical behavior of cemented bonds, we constructed a set of polydisperse samples with different solid fractions, and we tested these samples by means of a biaxial device with four rigid walls. The yield surfaces and plastic potentials were thus obtained and analyzed as functions of the solid fraction of the material, drawing interesting conclusions, confirming previous experimental findings, and, consequently, evidencing the great potential of discrete element simulations in exploring the behavior of real cemented geomaterials.
ISSN: 0266-352X

hal-00853748
https://hal.archives-ouvertes.fr/hal-00853748
DOI : 10.1016/j.compgeo.2012.11.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The growth of relief in active tectonic areas is mainly controlled by the interactions between tectonics and surface processes (erosion and sedimentation). The study of long-lived morphologic markers formed by these interactions can help in quantifying the competing effects of tectonics, erosion and sedimentation. In regions experiencing active extension, river-long profiles and faceted spurs (triangular facets) can help in un- derstanding the development of mountainous topography along normal fault scarps. In this study, we devel- oped analogue experiments that simulate the morphologic evolution of a mountain range bounded by a normal fault. This paper focuses on the effect of the fault slip rate on the morphologic evolution of the foot- wall by performing three analogue experiments with different fault slip rates under a constant rainfall rate. A morphometric analysis of the modelled catchments allows comparing with a natural case (Tunka half- graben, Siberia). After a certain amount of fault slip, the modelled footwall topographies of our models reaches a dynamic equilibrium (i.e., erosion balances tectonic uplift relative to the base level) close to the fault, whereas the topography farther from the fault is still being dissected due to regressive erosion. We show that the rates of vertical erosion in the area where dynamic equilibrium is reached and the rate of re- gressive erosion are linearly correlated with the fault throw rate. Facet morphology seems to depend on the fault slip rate except for the fastest experiment where faceted spurs are degraded due to mass wasting. A stream-power law is computed for the area wherein rivers reach a topographic equilibrium. We show that the erosional capacity of the system depends on the fault slip rate. Finally, our results demonstrate the pos- sibility of preserving convex river-long profiles on the long-term under steady external (tectonic uplift and rainfall) conditions.
ISSN: 0040-1951

hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966/document
https://hal.archives-ouvertes.fr/hal-00646966/file/preprint_Strak_2011.pdf
DOI : 10.1016/j.tecto.2011.10.005

Éditeur(s) : HAL CCSD
Résumé : International audience
After defining the High Performance Pre- Computing --referred as HPPC-- concept, the aim of the present study is to develop a prototype whether to approve or not the benefits of this concept. Our application case tries to answer the geophysical issue of coastal flooding. This is an example of an alert system based on the HPPC architecture, thus on pre-computed scenarios. The prototype provides the scientists with an ergonomic and on-demand tool allowing the run of scenarios of any implemented numerical models. These runs are available through a web application which submits the corresponding jobs on the remote french public cluster of HPC@LR. In this study we simulate the waves propagation over a Mediterranean grid using the wave model WaveWatch III⃝R . A reference simulation using usual conditions is approximated using the k-NN algorithm over 12, 98 and then 980 pre-computed scenarios. This simple experiment demonstrates how useful the pre-computing of scenarios is for alert systems as far as enough and relevant scenarios are pre-computed. This is the reason why searches continue in each critical points of the HPPC architecture such as the design of experiment, the approximation of the results by meta-models and the research of the closest scenarios in this big data context.
4th International Conference on Knowledge and Systems Engineering
Danang, Vietnam

lirmm-00736797
https://hal-lirmm.ccsd.cnrs.fr/lirmm-00736797
https://hal-lirmm.ccsd.cnrs.fr/lirmm-00736797/document
https://hal-lirmm.ccsd.cnrs.fr/lirmm-00736797/file/PID2396685.pdf
DOI : 10.1109/KSE.2012.36

Éditeur(s) : HAL CCSD Elsevier
Résumé : We investigate experimentally the alteration of fractured class-G cement flowed by CO2-rich brine. The experiment mimics a mechanically damaged rough-walled fractured cement annulus at temperature 60 °C and pressure 10 MPa. The experiment consists of flowing a reservoir-equilibrated brine mixed with CO2 (partial pressure of 2.3 MPa) through the fracture of average aperture 14 μm at constant flow rate (100 μL min−1). This flow rate corresponds to pressure gradient representative of an average in situ hydrodynamic condition. Results indicate an intense alteration of the cement with a large removal of mass at the scale of the sample. However, the fracture alteration patterns are triggered by the initial heterogeneity of the fracture aperture; the aperture of the low aperture zones tends to decrease due to calcite precipitation whereas preferential paths develop in the zones of higher aperture associated. Nevertheless, the expected large permeability increase triggered by the mass removal is mitigated by the precipitation of a low density Si-rich amorphous material. The alteration rate will decrease with time because of the increasing distance of diffusion between the fracture where the reactants are actively renewed by advection and the portlandite and C-S-H dissolution fronts. The different zones of reaction can be adequately modeled by a simple 1D diffusion-reaction model using published kinetics coefficients and extrapolation to larger times than the experiment time can be drawn. Altogether, and in addition to the previous studies of the alteration of fractured well cement annulus, this study shows that the leakage potential is strongly controlled by the initial distribution of the aperture along the fracture: low aperture zones will tend to self-heal while localized flow in connected high aperture paths will be perennial.
ISSN: 1750-5836

hal-01346006
https://hal.archives-ouvertes.fr/hal-01346006
DOI : 10.1016/j.ijggc.2016.01.032

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : Des techniques d'optimisation de formes sont utilisées dans des problèmes du Génie Côtier pour la protection des plages. En collaboration avec le bureau d'étude Bas-Rhône Languedoc ingénierie, un projet d'aménagement concret de la plage du Lido de Sète, utilisant des ouvrages immergés en géotextile, a été étudié. Des solutions optimales, visant à réduire la mise en suspension des sédiments, pour les structures de défenses ont été obtenues à partir d'un modèle hydrodynamique de propagation de houle. Une étude complémentaire à partir d'un modèle de circulation et des travaux expérimentaux en canal à houle permettent ensuite de valider les résultats optimaux numériques obtenus. Shape optimization techniques, focusing on coastal structures design, are used to solve coastal engineering problem. In collaboration with the Bas-Rhône Languedoc engineering Company, a actual development plan concerning the beach of the Lido of Sète has been studied. Optimal solutions, aimed at reducing sediments suspended, for defense structures have been obtained with a hydrodynamic water wave model. An additional study using a circulation model and experimental works in flume tend to validate optimal numerical results.
ISSN: 1760-8716

hal-00854031
https://hal.archives-ouvertes.fr/hal-00854031
DOI : 10.5150/jngcgc.2008.025-I

Éditeur(s) : Université de Montpellier II
Résumé : The sea bass, Dicentrarchus labrax, has been subjected to intensive aquaculture on the Mediterranean cost for ten years. Marine fish hatcheries are key factors in the aquaculture field, and face different pathologies, especially one of viral origin (nodavirus) that could challenge their feasibility. Consequently, we have tried to provide some data on larvae and spawning stocks. Firstly, we have studied the immunoglobulins, components of the specific humoral immunity, and their role as antibodies. On adult basses, these immunoglobulins are tetrameric molecules with high molecular weight (850 kD), made of heavy (H) - 80 kD and light (L) - 26 kD chains. In the eggs, simplest forms such as monomeric or dimeric are brought to the fore; they are located under the chorionic membrane. Secondly, we have studied the development of the immunity system on larvae, preparing IgM assays with ELISA method, the study on the organogenesis of the main lymphoid organs, and using flow cytometry for the ontogenesis of IgM producing cell. Based on this experience, we can propose a date for the immunocompetence onset of the bar, i.e. from the 54th day of the hatchery phase. Finally, we made the most of these different results to study a viral pathology (nodavirus) in spawners and larvae. We defined an experimental contamination model for larvae and eggs, and we highlighted that eggs born from vaccinated hen fishes were protected against the nodavirus.
Le bar, Dicentrarchus labrax, fait l'objet d'une aquaculture intensive sur le littoral Méditerranéen depuis une dizaine d'années. Les écloseries marines représentent un des maillons clefs de cette filière aquacole, et sont confrontées à différentes pathologies, dont une d'origine virale (nodavirus), pouvant remettre en cause leur faisabilité. Aussi, nous avons tenté d'apporter quelques données concernant la protection des larves et des géniteurs reproducteurs. Dans un premier temps, nous avons étudié les immunoglobulines, éléments de l'immunité spécifique humorale ainsi que leur rôle anticorps. Chez les bars adultes ces immunoglobulines sont des molécules tétramériques de haut poids moléculaire (850 kD), composées de chaînes lourdes (H) de 80 kD et légères (L) de 26 kD. Dans les oeufs, des formes plus simples, monomériques ou dimériques, sont mises en évidence et sont localisées sous la membrane chorionique. Dans un second temps, nous avons étudié la mise en place du système immunitaire spécifique chez les larves, en effectuant le dosage des IgM par ELISA, l'étude de l'organogenèse des principaux organes lymphoïdes, puis celle de l'ontogenèse des cellules productrices d'IgM par cytométrie de flux. L'ensemble de cette étude nous permet de proposer une date d'acquisition de l'immunocompétence à partir du 54ème jour d'élevage chez le bar. Enfin, ces différents résultats ont été mis à profit dans le cadre d'une pathologie virale (nodavirus) touchant les reproducteurs et les larves. Après avoir défini un modèle de contamination expérimental des larves et des oeufs, nous avons mis en évidence une protection des oeufs lorsque ceux-ci proviennent d'une femelle vaccinée (vaccin expérimental) contre le nodavirus.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1997/these-1265.pdf
http://archimer.ifremer.fr/doc/00000/1265/

Résumé : Le fluide chaud produit par les forages de la centrale géothermique de Bouillante (Guadeloupe) est enrichi en espèces dissoutes telles que la silice qui peuvent précipiter sous forme de dépôts solides lors de son refroidissement et gêner fortement la production électrique. L’un des principaux objectifs de ce travail de thèse a donc été d’améliorer l’état des connaissances sur les conditions physiques, chimiques et cinétiques de la précipitation de la silice amorphe à Bouillante. Après une étude des caractéristiques physico-chimiques des fluides et des dépôts associés au champ de Bouillante, des expériences sur la cinétique de précipitation de la silice, sur site, pour une large gamme de température (25 - 90°C) et de pH (4 - 12) ont été menées et analysées en détail.Pour l’ensemble de ces expériences, seule la polymérisation (réversible) de la silice dissoute, sous forme de suspensions colloïdales très stables en solution, a été observée. La modélisation des données expérimentales de cinétique montre que la vitesse de polymérisation de la silice suit une loi d’ordre 2 vis-à-vis de la silice dissoute jusqu’à l’équilibre en accord avec une dimérisation de la silice. Par contre, durant l’étape initiale de la réaction, une loi d’ordre 4 semble mieux adaptée, suggérant des réactions de polymérisation plus complexes avec formation de tétramères. La température a un effet limité sur la cinétique de polymérisation de la silice comparé à l’effet du pH qui est beaucoup plus important. L’énergie d’activation de la réaction globale est de 41 - 54 kJ pour des pH compris entre 5 et 8.La caractérisation de la silice précipitée a mis en évidence des différences notables entre la structure poreuse de la silice solide prélevée sur les installations de surface et celle de la silice colloïdale obtenue par polymérisation lors des expériences de cinétique, ce qui semble indiquer que des mécanismes différents interviennent dans ces deux contextes de précipitation de la silice dissoute.Le deuxième objectif de cette thèse était d’évaluer la possibilité de valoriser la silice extraite de l’eau géothermale de Bouillante dans un procédé de traitement des eaux naturelles par adsorption. Pour cela, les propriétés d’adsorption de la silice géothermale brute et fonctionnalisée par le poly(ethylèneimine) (ou PEI) ont été étudiées pour deux polluants : un colorant, le bleu de méthylène et un métal lourd, le plomb. Les résultats obtenus montrent que la silice brute possède une grande capacité d’adsorption vis-à-vis du bleu de méthylène. En outre, la fonctionnalisation de la silice par le PEI permet d’améliorer sa capacité d’adsorption vis-à-vis du plomb en solution, en accord avec un modèle cinétique du pseudo-second ordre suggérant une chimisorption. Le modèle d’isotherme de Redlich-Peterson est également en très bon accord avec les données expérimentales.
The hot geothermal fluid produced by the geothermal power plant of Bouillante (Guadeloupe) contains various dissolved components such as silica that can precipitate as solid deposits during their cooling and cause serious problems on the electricity generation. One of the aim of this study is to improve the understanding on the physical, chemical and kinetics conditions of the amorphous silica precipitation in the Bouillante geothermal field. After a study on the physical and chemical characteristics of the Bouillante fluids and deposits which can form during their exploitation, experiments on the kinetics of silica precipitation, on site, under a large range of temperature (25 – 90°C) and pH (4 – 12) have been carried out and analyzed in detail.During on site kinetics experimentations only dissolved silica polymerization (reversible) as colloidal gel, very stable in solution, was observed. Modeling of the experimental data showed that the kinetics polymerization is characterized by a 2-order kinetic law relative to dissolved silica until the equilibrium that is consistent with silica dimerization. On the other side, the initial stage of the reaction is better characterized by a 4-order kinetic law that suggested more complex polymerization reactions with tetramers formation.Temperature has a little effect on the polymerization kinetics compared with the pH which has an effect more important. The activation energy of silica precipitation calculated between 25 and 90°C, is about 41 - 54 kJ for pH ranging to 5 - 8.The characterization of the silica precipitate reveals significant differences in the porous structure of the silica collected on the surface installations and the one obtained from kinetic experiments that suggests different precipitation mechanisms. The second objective of this thesis was to evaluate the possibility to promote geothermal silica for the treatment of natural waters containing contaminants by adsorption. Adsorption properties of the untreated and functionalized by poly(ethylèneimine) (ou PEI) geothermal silica have been investigated for two pollutants: a colorant, the methylene blue and a heavy metal, the lead.Results showed that untreated silica has a great adsorption capacity concerning the methylene blue. Besides, silica functionalization by the PEI allows improving the adsorption capacity for lead in solution. The adsorption kinetics curves followed a pseudo-second order model consistent with a chimisorption. The isotherm model of Redlich-Peterson fitted well the experimental data.

http://www.theses.fr/2014AGUY0698/document