Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : Nature Publishing Group
Résumé : Submarine mud volcanoes are important sources of methane to the water column. However, the temporal variability of their mud and methane emissions is unknown. Methane emissions were previously proposed to result from a dynamic equilibrium between upward migration and consumption at the seabed by methane-consuming microbes. Here we show non-steady-state situations of vigorous mud movement that are revealed through variations in fluid flow, seabed temperature and seafloor bathymetry. Time series data for pressure, temperature, pH and seafloor photography were collected over 431 days using a benthic observatory at the active Hakon Mosby Mud Volcano. We documented 25 pulses of hot subsurface fluids, accompanied by eruptions that changed the landscape of the mud volcano. Four major events triggered rapid sediment uplift of more than a metre in height, substantial lateral flow of muds at average velocities of 0.4m per day, and significant emissions of methane and CO2 from the seafloor.
Nature Communications (2041-1723) (Nature Publishing Group), 2014-11-11 , Vol. 5 , P. 1-8

Droits : 2014 Macmillan Publishers Limited. All rights reserved.
http://archimer.ifremer.fr/doc/00245/35601/34137.pdf
http://archimer.ifremer.fr/doc/00245/35601/34138.pdf
DOI:10.1038/ncomms6385
http://archimer.ifremer.fr/doc/00245/35601/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A shallow field experimental site for CO2 injection was established at Maguelone (Languedoc, France), in order to test in an integrated manner a suite of surface and downhole hydrogeophysical monitoring methods. The objective is to improve monitoring of gas transport in the shallow subsurface and to determine the sensitivity of CO2 monitoring systems for leakage detection. The site offers a natural laboratory to study the processes associated with CO2 injection in a clastic and clay-rich context saturated with saline fluids. Prior to CO2 injection, three nitrogen (N2) injections were undertaken in 2012 to measure the site response to neutral gas injection. In 2013, a volume of 111 m3 (mass of 220 kg) of CO2 was injected during 3.5 h at 15 m depth. During each experiment, the gas plumes were successfully detected from pressure monitoring, time-lapse induction logging and downhole resistivity monitoring with dipole–dipole array. Increases in resistivity are attributed to free gas propagation (either N2 or CO2) whereas decreases in resistivity correlate with CO2 dissolution in the pore fluid. Chemical analyses confirm this hypothesis with a decrease in pH and an increase in the concentration of dissolved species in the latter case.
ISSN: 1750-5836

hal-01355943
https://hal.archives-ouvertes.fr/hal-01355943
DOI : 10.1016/j.ijggc.2015.12.005

Éditeur(s) : HAL CCSD Humana Press
Résumé : International audience
The sodium-proton exchanger 1 (NHE-1) is a membrane transporter that exchanges Na(+) for H(+) ion across the membrane of eukaryotic cells. It is cooperatively activated by intracellular protons, and this allosteric regulation is modulated by the biophysical properties of the plasma membrane and related lipid environment. Consequently, NHE-1 is a mechanosensitive transporter that responds to osmotic pressure, and changes in membrane composition. The purpose of this study was to develop the relationship between membrane surface tension, and the allosteric balance of a mechanosensitive transporter such as NHE-1. In eukaryotes, the asymmetric composition of membrane leaflets results in a difference in surface tensions that is involved in the creation of a reservoir of intracellular vesicles and membrane buds contributing to buffer mechanical constraints. Therefore, we took this phenomenon into account in this study and developed a set of relations between the mean surface tension, membrane asymmetry, fluid phase endocytosis and the allosteric equilibrium constant of the transporter. We then used the experimental data published on the effects of osmotic pressure and membrane modification on the NHE-1 allosteric constant to fit these equations. We show here that NHE-1 mechanosensitivity is more based on its high sensitivity towards the asymmetry between the bilayer leaflets compared to mean global membrane tension. This compliance to membrane asymmetry is physiologically relevant as with their slower transport rates than ion channels, transporters cannot respond as high pressure-high conductance fast-gating emergency valves.
ISSN: 1085-9195

inserm-00871709
http://www.hal.inserm.fr/inserm-00871709
http://www.hal.inserm.fr/inserm-00871709/document
http://www.hal.inserm.fr/inserm-00871709/file/art_3A10.1007_2Fs12013-012-9340-7.pdf
DOI : 10.1007/s12013-012-9340-7

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : On the basis of an existing multiparameter borehole fluid sensor(p, T Cw, pH, Eh), a new downhole tool designed for 200 bars and 75 degrees C was developed to measure the spontaneous electrical potential in situ with great precision (better than a mu V). To this end, the new sensor is based on the use of unpolarizable Pb/PbCl2 electrodes either at the surface or downhole. In situ testing has demonstrated a capacity to identify several subsurface sources of natural electrical potential such as diffusion ones (membrane potential in the presence of clays, Fickian processes due to pore fluid salinity gradients), or else the electrokinetic mechanisms with gradients in pore fluid pressure. As a consequence, Multi-Sensors Electrical Tool (MuSET) might be used as an "electrical flow meter" sensitive to both horizontal and vertical fluid flow in a vertical borehole.
ISSN: 1631-0713

hal-00445251
https://hal.archives-ouvertes.fr/hal-00445251
DOI : 10.1016/j.crte.2009.07.009

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Dehydration reactions result in minerals’ replacement and a transient fluid-filled porosity. These reactions involve interface-coupled dissolution–precipitation and might therefore lead to fixed crystallographic orientation relations between reactant (protolith) and product phases (i.e. topotaxy). We investigate these two phenomena in the dehydration of a foliated antigorite (atg) serpentinite by comparing the crystallographic preferred orientation (CPO) developed by olivine (ol), orthopyroxene (opx) and chlorite (chl) during high-pressure antigorite and chlorite dehydration in piston-cylinder experiments and in natural samples recording the dehydration of antigorite (Cerro del Almirez, Betic Cordillera, Spain). Experiments were performed under undrained conditions resulting in fluid-filled porosity and in strong CPO of the prograde minerals, controlled by the pre-existing antigorite CPO in the reactant foliated serpentinite. The orientation of a ol,opx and c∗chl is parallel to c∗atg from the protolith. The Cerro del Almirez samples show similar, locally well-developed topotactic relations between orthopyroxene, chlorite and antigorite, but the product CPOs are weaker and more complex at the thin section scale. In contrast to the experiments, olivine from natural samples shows a weak correlation between b ol and the former c∗atg. We relate the strengthening of local topotactic relations and the weakening of the inherited CPO at a larger scale in natural samples to compaction and associated fluid migration. Microstructural features that might be related to compaction in the natural samples include: (1) smooth bending of the former foliation, (2) gradual crystallographic misorientation (up to 16°) of prismatic orthopyroxene due to buckling by dislocation creep, (3) inversion of enstatite to low clinoenstatite (P21/c) along lamellae and (4) brittle fracturing of prismatic orthopyroxene enclosed by plastically deformed chlorite. The coexistence of orthopyroxene buckling and clinoenstatite lamellae enables estimating the local strain rates and shear stresses generated during compaction. An lower bound for the strain rates in the order of 10−12 to 10−13 s−1 and shear stresses of 60–70 MPa are estimated based on creep data. Lower shear stresses (20–40 MPa) are retrieved using a theoretical approach. These data point to slow compaction (and fluid extraction) in nature if the system is not perturbed by external forces, with rates only marginally higher than the viscoplastic deformation of the solid matrix.
ISSN: 0010-7999

hal-01174158
https://hal.archives-ouvertes.fr/hal-01174158
DOI : 10.1007/s00410-015-1129-4

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fluid-rock interactions can control earthquake nucleation and the evolution of earthquake sequences. Experimental studies of fault frictional properties in the presence of fluid can provide unique insights into these interactions. We report the first results from experiments performed on cohesive silicate-bearing rocks (microgabbro) in the presence of pressurized pore fluids (H2O, drained conditions) at realistic seismic deformation conditions. The experimental data are compared with those recently obtained from carbonate-bearing rocks (Carrara marble). Contrary to theoretical arguments, and consistent with the interpretation of some field observations, we show that frictional melting of a microgabbro develops in the presence of water. In microgabbro, the initial weakening mechanism (flash melting of the asperities) is delayed in the presence of water; conversely, in calcite marble the weakening mechanism (brittle failure of the asperities) is favored. This opposite behavior highlights the importance of host-rock composition in controlling dynamic (frictional) weakening in the presence of water: cohesive carbonate-bearing rocks are more prone to slip in the presence of water, whereas the presence of water might delay or inhibit the rupture nucleation and propagation in cohesive silicate-bearing rocks.
ISSN: 0091-7613

hal-01054327
https://hal.archives-ouvertes.fr/hal-01054327
DOI : 10.1130/G34916.1

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In this paper, the generalized Stokes problem αu−νΔu+∇p=f, ∇u=0, is considered, where ν denotes the kinematic viscosity, α is a positive parameter proportional to the inverse of the time-step, and the source term f gathers the external forcing, the nonlinear term, and the explicit part of the linear term. The system is derived from a time discretization for the Navier-Stokes equation governing the motion of a two-dimensional incompressible fluid. A domain decomposition numerical method is developed for solving the system. The original domain is divided into several nonoverlapping subdomains, and in each subdomain the concerned equations are discretized by certain finite element methods. A new feature of the method is that the pressure p is required to be piecewise linear rather than piecewise constant, so that the nonphysical oscillations in the solution using piecewise linear pressure are eliminated. However, a difficulty in using piecewise linear pressure is that the Stokes problem in each subdomain involves Dirichlet boundary conditions on pressure at the interface, which is not a real Stokes problem. To avoid the difficulty, a modification is proposed which removes the continuity conditions on the pressure across the interface. In this way, the Stokes problem in each subdomain has only Dirichlet boundary conditions on the velocity. Formulations and discussions for both the methods are presented, which shows that the modified method is simpler than the original one. Numerical experiments are displayed to show the efficiency of the methods, especially that the modified method has the same accuracy as the original one.
ISSN: 0749-159X

hal-00730200
https://hal.archives-ouvertes.fr/hal-00730200

Éditeur(s) : HAL CCSD Elsevier
Résumé : Kyanite and zoisite eclogites from the Limousin area in the Variscan French Massif Central (FMC) have been formed by deep subduction to 100 km depth at peak pressure-temperature conditions around 660 degrees C and 2.9 GPa. They belong to a thin tectonic unit comprising ophiolitic bodies devoid of HP-UHP markers and forming a transported suture zone now separating the two main lithotectonic units of the FMC with contrasted tectono-metamorphic features (namely the lower and upper allochthons). Composition of kyanite-eclogites is similar to supra-subduction-zone basalts found in back-arc basins or island arcs (LREE depleted, negative Nb-Ta anomalies, epsilon Nd: +6 to + 9). Zoisite eclogites have the major-element fingerprint of ultrabasic iron-rich plagioclase cumulates common in continental intrusions or forming Fe-Ti oceanic gabbros. The distribution of immobile trace-elements is however more comparable to alkaline Si-undersaturated rocks, but the Sr-Nd isotopic composition (Sr-87/Sr-86: 0.706; epsilon Nd: -3 to -5) suggests the intervention of an old radiogenic crustal component during their petrogenesis. The chemical composition of hydrous zoisite eclogites does not correspond closely to a common magmatic precursor. It is thus suggested that, by analogy with well exposed worldwide HP-UHP terranes, at least a part of the trace-element signature and the isotopic compositions are controlled by channelled fluid-rock interaction at UHP conditions, leading to localised segregation of zoisite that hosts nearly all Sr and LREE budgets of the bulk eclogite. Sr-Nd isotopic composition of these samples is thus controlled by zoisite and probably represents the isotopic composition of the fluid phase present during UHP recrystallisation. Zircons extracted from a zoisite eclogite were dated in-situ by LA-ICP-MS. Crystallisation of the magmatic precursor is bracketed between 489 and 475 Ma and the UHP event is dated at 412 +/- 10 Ma, in agreement with published ages for the Eo-Variscan HP stage in the FMC. A late resetting of the U-Pb isotopic system at 382 +/- 7 Ma is related to an anatectic high pressure-medium pressure event, well known in the Limousin area. The oceanic eclogites dated in this study are tentatively linked to the Galicia-South Brittany Lower Paleozoic Ocean; they show evidence of the existence of an intra-oceanic subduction zone at the Lower Ordovician and of partial closure of this oceanic domain by ocean-continent subduction during Early Devonian.
ISSN: 0024-4937

hal-00512835
https://hal.archives-ouvertes.fr/hal-00512835
DOI : 10.1016/j.lithos.2010.05.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Secondary migration is defined as the movement of hydrocarbons through relatively permeable rocks from source to trap: a two-phase flow within a porous medium. Depending on the geometry and capillary pressure distributions of carrier beds, secondary migration has both vertical and lateral components. The present paper focuses on that part of the migration where the movement is mainly vertical. Its objective is to propose a description of the dynamics governing the vertical part of secondary migration based on the main physical aspects of two-phase flow in a homogeneous porous medium. The study is illustrated by laboratory observations performed in a vertical, 2-D Hele-Shaw cell filled with a transparent porous medium where the flow of dyed oil invading a wetting fluid is visually observed. These observations help us to understand the effect of buoyant, capillary and viscous forces on the resulting flow, the relative importance of which is characterized by non-dimensional numbers. Extrapolating these observations to natural media, it is proposed that vertical secondary migration can be described as a percolation of disconnected and vertically-elongated stringers. These stringers do not move continuously but as a succession of snap-off and re-feeding events which result in a jerky upward movement. Using parameters characterizing the physical properties of the fluid and of the porous medium, the geometry and the dynamic behavior of the stringers are estimated. The width of stringers occurring during secondary migration in geological media is centimetric and their vertical size ranges from several centimeters to a few meters. An upper limit of the mean upward velocity of stringers is proposed, as well as an estimate of their spatial density and of the minimum, average horizontal distance (decametric) between two stringers. The stringers are sparsely distributed, resulting in a low average oil loss and a high efficiency of the vertical migration process.
ISSN: 0264-8172

hal-00831370
https://hal.archives-ouvertes.fr/hal-00831370
https://hal.archives-ouvertes.fr/hal-00831370/document
https://hal.archives-ouvertes.fr/hal-00831370/file/pekins-V-edited.pdf
DOI : 10.1016/j.marpetgeo.2013.04.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Numerical programs for simulating flow and reactive transport in porous media is essential for predicting reservoir properties related to CO2 sequestration performance, subsurface storage and risk assessment. In this paper we solve the Navier Stokes' equation using finite difference method, on a simulated porous rock structure, to study the velocity distribution of fluid flowing through it under a constant pressure gradient. A reactive solute carried through the fluid is allowed to interact with the minerals in the rock. This chemical reaction dissolves the mineral which changes the rock structure thus affecting its flow properties. These changes of flow properties are studied with variation in reactive solute concentration and pressure field. The different mechanisms of dissolution responsible for the variation of flow properties for the different parameters is predicted. Before the onset of homogeneous dissolution, variation in porosity follows a power-law behaviour with change in permeability when the latter is scaled by the concentration of the reactive species. The simulation results are compared with available experimental data and found to give a reasonable match.
ISSN: 0022-1694

hal-00757760
https://hal.archives-ouvertes.fr/hal-00757760
DOI : 10.1016/j.jhydrol.2012.05.024

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Although lawsonite-bearing rocks are rare in exhumed high-pressure (HP) terranes, they are considered to exert a primary role in subduction dynamics. Recent observations in natural settings have shown that fluid–rock interaction at HP conditions, including metasomatism, may lead to unusually high lawsonite amounts even in rocks that originally contained little or no lawsonite. This process may therefore bear important implications for element recycling in subduction zones. A detailed characterization of the geochemical fingerprints associated with lawsonite metasomatism is presented in this contribution. The studied rocks belong to the HP terranes of Alpine Corsica (France), which is the largest documented exposure for lawsonite metasomatism. Metasomatic lawsonite displays complex compositional zoning, including high trace element, Cr and Ti content. The trace element content is much higher compared with the average of non-metasomatic lawsonite, and is in line with the re-incorporation of large amounts of trace elements (e.g. REE, Sr, Pb, Th) in the rock during metasomatism, as shown by mass transfer calculations. Our data suggest that serpentinites represented the main fluid source for the metasomatism, with concurrent contribution of other, possibly Ca-rich lithologies, such as mafic or meta-sedimentary rocks. We propose that the breakdown of metasomatic lawsonite may contribute to the genesis of magmas and their characteristic geochemical signatures.
ISSN: 0263-4929

hal-01107395
https://hal.archives-ouvertes.fr/hal-01107395
DOI : 10.1111/jmg.12074

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report concentrations of hydrogen (H) in upper mantle minerals of peridotites (olivine and pyroxenes) transported by alnöitic lavas, which erupted on the southwestern border of the Ontong Java Plateau (Malaita, Solomon Islands, West Pacific). Unpolarized FTIR analyses show that olivine, orthopyroxene, and diopside contain 2–32 ppm, 162–362 ppm and 159–459 ppm wt H2O, respectively. In the studied lherzolites, garnets are anhydrous. The concentration of hydrogen within individual olivine and pyroxene grains is almost homogeneous, indicating no evidence of dehydration or hydration by ionic diffusion. In the lherzolite, the concentration of hydrogen in olivine tends to increase weakly with depth (based on geothermobarometry), consistent with the increase of water solubility with increasing water fugacity as a function of pressure, but concentrations remain well below water-saturation values determined experimentally. The highest concentration of H in olivine (32 ppm wt H2O) is, however, found in refractory spinel harzburgites, which equilibrated at depths of 85 km., while deeper specimens as the high-temperature spinel harzburgites, and some of the garnet lherzolites, contain less hydrogen in olivine. Olivines from pyroxene- or pargasite-rich peridotites have also lower hydrogen concentrations. We interpret the high hydrogen concentrations in olivine from the refractory spinel harzburgites as due to (1) simultaneous hydration and metasomatism of the lithospheric mantle by a water-rich silicate melt/fluid, during which hydrogen follows MREE and where spinel harzburgite have experienced ‘stealth’ metasomatism, and/or (2) to a late ‘fleeting’ hydrogen metasomatism, which would hydrate the rock after this first ‘stealth’ metasomatism event. In the second case, the composition of the ‘fleeting’ percolating fluid (small volume fraction of very evolved fluids, with high volatiles concentration and transient properties) is likely to be linked to the decrease of the plume activity and resulting in the downwelling of the lithosphere asthenosphere boundary. The difference in hydrogen concentration between harzburgites and lherzolites could be linked to variation in trace elements in olivine induced by the first ‘stealth’ metasomatism alone or associated to the late ‘fleeting’ hydrogen metasomatism, triggered by the lack of secondary crystallization of clinopyroxenes in the harzburgite. To conclude, H concentrations in upper mantle minerals may thus be correlated to metasomatic events, with the later yielding variation of the mineral assemblage and trace element composition that constitute the peridotites.
ISSN: 0024-4937

hal-01143385
https://hal.archives-ouvertes.fr/hal-01143385
DOI : 10.1016/j.lithos.2014.11.005

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Serpentinization of the oceanic lithosphere contributes significantly to the geochemical cycle from spreading ridges to subduction zones. In situ trace element analysis of oceanic serpentinites from the Mid-Atlantic Ridge and the Greater Antilles (Cuba, Dominican Republic) shows that all serpentine minerals are enriched in fluid-mobile elements (FME: As, Sb, B, Li, Cs, Pb, U, Ba, Sr). We observe no loss of these elements from abyssal to subduction environments during prograde metamorphism. Moreover, the transition from lizardite/chrysotile to antigorite during subduction is marked by a strong over-enrichment in As and Sb in antigorite, indicating late contamination by a sedimentary source. This suggests that a second stage of serpentinization occurs in the earlier stages of subduction, when newly formed or reactivated normal faults ease fluid penetration, and/or in the subduction channel. Our study shows that, from spreading ridges to forearc environments, serpentines act as sponges for FME. We posit that, until ultimate antigorite breakdown, serpentinites efficiently transport significant amounts of FME down to great depths in the mantle.
ISSN: 0954-4879

insu-00603792
https://hal-insu.archives-ouvertes.fr/insu-00603792
DOI : 10.1111/j.1365-3121.2011.00995.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report chlorine (Cl) and fluorine (F) abundances in minerals, interstitial glasses, and melt inclusions in 12 andesite-hosted, spinel harzburgite xenoliths and crosscutting pyroxenite veins exhumed from the sub-arc lithospheric mantle beneath Avacha volcano in the Kamchatka Arc (NE Russia). The data are used to calculate equilibrium mineral-melt partition coefficients (Dmineral/meltDmineral/melt) for Cl and F relevant to subduction-zone processes and unravel the history of volatile depletion and enrichment mechanisms in an arc setting.Chlorine is ∼100 times more incompatible in pyroxenes (View the MathML sourceDClmineral/melt = 0.005–0.008 [±0.002–0.003]) than F (View the MathML sourceDFmineral/melt = 0.50–0.57 [±0.21–0.24]), which indicates that partial melting of mantle sources leads to strong depletions in Cl relative to F in the residues. The data set in this study suggests a strong control of melt composition on View the MathML sourceDCl,Fpyroxene/melt, in particular H2O contents and Al/(Al + Si), which is in line with recent experiments. Fluorine is compatible in Ca-amphibole in the ‘wet’ sub-arc mantle (View the MathML sourceDFamphibole/melt = 3.5–3.7 [±1.5]) but not Cl (View the MathML sourceDClamphibole/melt = 0.03–0.05 [±0.01–0.03]), indicating that amphibole may fractionate F from Cl in the mantle wedge. The inter-mineral partition coefficients for Cl and F in this study are consistent amongst different harzburgite samples, whether they contain glass or not. In particular, disseminated amphibole hosts much of the Cl and F bulk rock budgets of spinel harzburgites (View the MathML sourceDClamphibole/pyroxene up to 14 and View the MathML sourceDFamphibole/pyroxene up to 40). Chlorine and fluorine are variably enriched (up to 1500 ppm Cl and 750 ppm F) in the parental arc picrite and boninite melts of primitive pyroxenite veins (and related melt inclusions) crosscutting spinel harzburgites.Based on the data in this study, the main inferences on the behaviour of Cl and F during melting and metasomatic processes in the sub-arc mantle are as follow:(i) Melting models show that most depleted mantle protoliths of intra-oceanic arc sources can have extremely low Cl/F (0.002–0.007) before being overprinted by subduction-derived components.(ii) Chlorine has a higher percolation distance in the mantle than F. Even for small fluid or melt volumes, Cl and F signatures of partial melting are overprinted by those of pervasive percolation, which increases Cl/F in percolating agents and bulk peridotites during chromatographic interaction and/or amphibole-forming metasomatic reactions. These processes ultimately control the bulk Cl and F compositions of the residual mantle lithosphere beneath arcs, and likely in other tectonic settings.(iii) Fluxed melting models suggest that Cl enrichment in arc picrite and boninite melts in this study, and in many arc melt inclusions reported in the literature, could be related to the infiltration of high Cl/F fluids derived from subducted serpentinite or altered crust in mantle wedge sources. However, these high Cl/F signatures should be re-evaluated with new models in light of the possible overprint of pervasive percolation effects in the mantle. The breakdown of amphibole (and/or mica) in the deep metasomatised mantle at higher pressure and temperature conditions than in the slab may explain, at least in part, the positive correlations between F abundances and Cl/F in primitive arc melt inclusions and slab depth.
ISSN: 0016-7037

hal-01553610
https://hal.archives-ouvertes.fr/hal-01553610
DOI : 10.1016/j.gca.2016.10.035

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report new structural, microstructural, petrological, and major- and trace-element data on ultramafic rocks from the Kondyor zoned ultramafic complex in Far-East Russia. The ultramafic rocks are subdivided into three subconcentric lithologies, from core to rim: (1) a metasomatic domain where generally phlogopite-rich dykes pervasively intrude dunite; (2) a main dunite core; (3) a pyroxenite rim. The ultramafic rocks have nearly vertical contacts with the surrounding Archaean basement (gneisses, quartzites and marbles) and hornfelsed Riphean sediments. The hornfelsed sediments show a relatively steep ( 60), outward dipping layering, which rapidly flattens to horizontal away from the inner contact. Although the Riphean sediments define a dome-like structure, the inward, shallow dipping foliation of the dunites indicates a synformal structure. Detailed petro-structural investigations indicate that the Kondyor dunites were deformed by solid-state flow under asthenospheric mantle conditions. The outward textural change from coarse- to fine-grained equigranular dunite and the outward-increasing abundance of subgrains and recrystallized olivine grains suggest dynamic recrystallization while fluid circulation was channelized within the core metasomatic zone, with a decreasing melt fraction from core to rim, and also suggest that solid-state deformation induced grain-size reduction towards the cooling border of the Kondyor massif. Based on their geochemistry, the dunites are interpreted as mantle rocks strongly affected by reaction with melts similar to the JurassicCretaceous Aldan Shield lamproites. Rim pyroxenites were formed by a melt-consuming peritectic reaction, implying the existence of at least a small, conductive thermal gradient around the dunite body while the latter was still at near-solidus temperature conditions. This suggests that the zoned structure of Kondyor was initiated at mantle depths, most probably within the subcontinental lithosphere. Upon cooling, the lamproitic melts were progressively focused in the central part of the massif and drained into vein conduits where they reacted with the wall-rock dunite. Two-dimensional numerical modelling based on finite-differences with a marker-in-cell technique incorporates temperature-dependent rheologies for both molten and non-molten host rocks. The modelling consolidates the structural, petrological and geochemical interpretations, which show that the dunites represent the synformal, flat-lying apex of an asthenospheric mantle diapir, triggered by fluid pressure channelized in the core, which nearly reached the Earths surface. We conclude that translithospheric mantle diapirism is an important mode of mass transfer in the Earth.
ISSN: 0022-3530

hal-00424508
https://hal.archives-ouvertes.fr/hal-00424508
DOI : 10.1093/petrology/egn083

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A CO2-rich brine core-flood experiment in calcite limestone for conditions representative of underground storage (P = 12 MPa and T = 100°C) was performed in order to explore the dissolution mechanisms arising at moderate CO2 partial pressure (0.3 MPa). An increase of the total porosity (φT) accompanied by a persistent permeability (k) decrease was measured. The mechanisms controlling this atypical anticorrelated k − φT relationship were investigated from the analysis of high-resolution X-ray microtomography images of the sample acquired before and after the experiment. All the evidences converge to the conclusion that the ubiquitous decrease of permeability measured during the 44 h of dissolution is due to the clogging of a fraction of the macroporosity by microporous material triggered by the rearrangement of the detached undissolved particles. This mechanism results in the development of low permeability zones bridging the macroporosity.
ISSN: 0094-8276

hal-00903585
https://hal.archives-ouvertes.fr/hal-00903585
DOI : 10.1002/grl.50595