Éditeur(s) : HAL CCSD
Résumé : This study is designed to improve the understanding of structural, mechanical and petrophysical characteristics of deformation bands in porous sandstone such as their potential influence on fluid storage or migration in reservoir setting. Structural and petrophysical analysis of band networks from Provence show that permeability of band is mainly controlled by the degree of cataclasis and diagenetic processes at depth. Map-scale analysis of band networks underlines the major influence of tectonic regime on band distribution, organization and permeability. Band associated to normal-fault regime (cataclasis and low-permeability) are located around map-sclae-fault whereas band associated to thurst-fault regime (moderate cataclasis and permeability) are pervasively distributed in all the area. Reverse-sense band are cataclastic and low-permeabiilty around the Roquemaure thrust, which show the potential role of large-scale fault on structural and petrophysical characteristics of bands. This analysis also shows the influence of fault propagation on formation of low permeability catacastic bands. This analysis suggests also granulometry as factor controlling organization of band networks.A mechanical analysis of deformation bands is realized based on results from Provence. Yield envelopes of these materials are calculated from analytical solution. Triaxial tests done on sandstone (L'Etang quarry, Orange) confirm the shape of yield envelope theoretically calculated. Triaxial tests done on the poorly-lithified sands (Boncavaï quarry, Uchaux) show grain size, sorting and packing influencing yield envelope and cataclastic band localization at shallow burial depth. Stress paths are calculated for burial and tectonic event (extension and contraction) using the relationship between main stress and secondary stresses (K0) calibrated from well data. These different results are integrated into a model which allows to estimate type and structural characteristics of bands susceptible to form for a known geological setting.A structural, mechanical and petrophysical model is established form these results. This model is calibrated by permeability data from deformation bands of Provence and results from the mechanical model of strain localization. This model is also confronted to a synthesis of permeability data from literature, which confirms the influence of the different controlling parameters integrated to the model. This model is applied for two sites of uranium exploration/exploitation in porous sandstone reservoirs and validated by field observations.
Cette étude est destinée à améliorer la compréhension des caractéristiques structurales, pétrophysiques et mécaniques des bandes de déformation dans les grès poreux ainsi que de leur rôle potentiel sur la migration ou le piégeage des fluides en milieu réservoir. L'analyse structurale et pétrophysique des réseaux de bandes de Provence montre que leur perméabilité découle principalement de l'intensité de la cataclase dans leur microstructure et des processus diagénétiques qui peuvent s'y localiser avec la profondeur. L'analyse régionale de ces réseaux de bandes souligne l'influence majeure du régime tectonique sur leur distribution, leur organisation et leur perméabilité. Les bandes associées au régime normal (cataclactiques et peu perméables) sont localisées autour des failles cartographiques, tandis que les bandes associées au régime inverse (modérement cataclastiques et perméables) sont distribuées dans toute la région. Les bandes inverses sont fortement cataclastiques et imperméables uniquement autour du chevauchement de Roquemaure ce qui montre le rôle potentiel de la présence de grande faille sur les caractéristiques structurales et pétrophysiques de ces bandes. D'autre part, cette analyse suggère que la granulométrie de l'encaissant peut influencer l'initiation et l'organisation des réseaux. L'analyse mécanique des bandes de déformation a ensuite été réalisée à partir des résultats obtenus en Provence. L'enveloppe de plasticité de ces matériaux est calculée à l'aide d'une solution analytique. Les essais triaxiaux menés sur le grès de la carrière de l'Etang (orange) confirment la forme de ces enveloppes estimées théoriquement. Les essais réalisés sur les sables de Boncavaï (Uchaux) montrent que la taille des grains, le tri et de la compaction dans ces matériaux peu lithifiés influent sur leurs enveloppes de plasticité et la localisation des bandes cataclastiques à faibles profondeurs. Les trajets de contraintes sont estimés pour les phases d'enfouissement et de chargement tectonique (extension et compression) à partir de la relation entre contrainte principale et contraintes secondaires (K0), calibrée à partir de données de forage. Ces résultats sont intégrés à un modèle permettant d'estimer la nature et les caractéristiques structurales des bandes susceptibles de se former dans un contexte géologique donné. Un modèle structural, mécanique et pétrophysique a été établir à partir de ces différents résultats. Ce modèle est calibré à partir des données de perméabilité mesurées sur les bandes de Provence et des résultats du modèle mécanique de localisation cité précédemment. Ce modèle a ensuite été confronté à une synthèse des données de perméabilité disponibles dans la littérature et confirme l'influence des différents paramètres de contrôle pris en compte dans le modèle. Ce modèle a enfin pu être appliqué sur deux sites d'explorations/exploitations d'uranium en réservoir gréseux poreux et validé par les résultats obtenus, en concordance avec les observations de terrain.
https://tel.archives-ouvertes.fr/tel-01001389

NNT : 2013MON20067
tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389/document
https://tel.archives-ouvertes.fr/tel-01001389/file/36072_BALLAS_2013_archivage-1_cor.pdf

Éditeur(s) : HAL CCSD
Résumé : In coastal carbonate aquifers submitted to a saline intrusion, water - rock interactions processes at the interface between freshwater and saltwater are a cause for heterogeneities development within the porous media. The dissolutions and precipitations induced by the mixing zone play a major role in the transport properties of the reservoir and so in the long term evolution of the saltwater intrusion. The characterization and the in situ observation of a current saline intrusion in the Llucmajor carbonate platform at the experimental site of Ses Sitjoles (South-Easth of Mallorca Island, Spain), allowed to study the temporal evolution of the saltwater intrusion and the biogeochemical processes active in the mixing zone. The influence of microstructure, characterized using X-Ray microtomography, on the petrophysical and flow properties was investigated in laboratory and flow-through experiments were also conducted to study the modifications of the microstructures when submitted to water - rock interactions processes. The mixing zone at the Ses Sitjoles site appears as quite thick and not very sensitive to climate and anthropic stress and is proved to be the locus of active microbiological activity. Laboratory studies highlight a strong control of the microporosity on transport processes and of pCO2 on water - rock interactions. The percolation experiments of slightly reactive waters reveal calcite dissolution together with a decrease in permeability due to a rearrangement of micro-grains within the microporous network.
Les processus d'interactions fluide-roche à l'interface eau douce-eau salée, dans les aquifères carbonatés côtiers soumis à une intrusion saline, sont une des causes du développement d'hétérogénéités dans la structure du milieu poreux. Les dissolutions et/ou précipitations engendrées par la présence de cette zone de mélange jouent un rôle déterminant pour les propriétés de transport du réservoir et donc l'évolution à long terme de l'intrusion d'eau salée. En prenant l'exemple de la plateforme carbonatée de Llucmajor au niveau du site expérimental de Ses Sitjoles (Sud-Est de Majorque, Espagne), un travail de caractérisation et d'observation in situ à moyen terme de l'intrusion saline actuelle de ce réservoir permet de décrire son évolution temporelle et les processus biogéochimiques actifs dans la zone de mélange. L'influence de la microstructure du milieu poreux, caractérisée par microtomographie RX, sur les propriétés pétrophysiques et hydrodynamiques est étudiée en laboratoire et des expériences de percolations d'eaux réactives (mélanges eau douce - eau salée et eau pure chargée en CO2) sont réalisées afin d'étudier les modifications de ces microstructures lorsqu'elles sont soumises à des interactions eau - roche. La zone de mélange eau douce - eau salée rencontrée au niveau du site de Ses Sitjoles est large et peu sensible aux contraintes extérieures (climatologiques et anthropiques) et constitue un lieu d'activité microbiologique particulièrement actif. En laboratoire, on observe un fort contrôle des phénomènes de transport par la microporosité et des processus d'interactions eau - roche par la pCO2. Dans le cas d'une percolation de fluides moyennement réactifs, les expériences mettent en évidence une dissolution de calcite accompagnée par une diminution de la perméabilité, liée à un réarrangement des micro-grains à l'intérieur du réseau microporeux.
https://tel.archives-ouvertes.fr/tel-00767152

tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152/document
https://tel.archives-ouvertes.fr/tel-00767152/file/thesegaring.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper we solve the Navier Stokes’ equation using finite difference method, on a simulated porous rock structure in 2-D, to study the velocity distribution of fluid flowing through it under a constant pressure gradient. A reactive solute carried through the fluid is allowed to interact with the minerals in the rock. Depending on the rock composition, both dissolution and precipitation reactions may occur. However precipitation occurs only through the cations that are released in the solution due to dissolution. These combined dissolution–precipitation reactions change the porosity, permeability and pore geometry of the sedimentary rock. We study the temporal changes of these properties as functions of Peclet number, concentration of the reactive solute and ratio of Damkholer numbers of dissolution to precipitation. The final flow property is decided by a combination of these parameters.
ISSN: 0022-1694

hal-01115291
https://hal.archives-ouvertes.fr/hal-01115291
DOI : 10.1016/j.jhydrol.2014.10.019

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A CO2-rich brine core-flood experiment in calcite limestone for conditions representative of underground storage (P = 12 MPa and T = 100°C) was performed in order to explore the dissolution mechanisms arising at moderate CO2 partial pressure (0.3 MPa). An increase of the total porosity (φT) accompanied by a persistent permeability (k) decrease was measured. The mechanisms controlling this atypical anticorrelated k − φT relationship were investigated from the analysis of high-resolution X-ray microtomography images of the sample acquired before and after the experiment. All the evidences converge to the conclusion that the ubiquitous decrease of permeability measured during the 44 h of dissolution is due to the clogging of a fraction of the macroporosity by microporous material triggered by the rearrangement of the detached undissolved particles. This mechanism results in the development of low permeability zones bridging the macroporosity.
ISSN: 0094-8276

hal-00903585
https://hal.archives-ouvertes.fr/hal-00903585
DOI : 10.1002/grl.50595

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Type I and Type II eclogite xenoliths from the Roberts Victor kimberlite (South Africa) show marked differences in terms of microstructures, mineralogy, major-and trace-element compositions and oxygen-isotope compositions. The unequilibrated microstructures of Type I eclogites, their typical accessory assemblages (phologopite, diamond, sulphides, fluid inclusions) and the ubiquitous presence of "melt pockets" in garnets provide strong evidence of metasomatism. Type II eclogites systematically lack such features and are microstructurally more equilibrated. Type I eclogites are more magnesium-rich than most Type II (mean Mg# = 0.56 vs. 0.46), while Type II eclogites are generally more Ca-rich (mean CaO = 9 vs. 12 wt%) and Fe-rich (mean FeO = 10 vs. 12 wt%). Type I eclogites are systematically enriched in LREE, Sr, Ba, alkali elements, HFSE, Th and U compared to the more depleted Type II eclogites. Calculated trace-element patterns of fluids in equilibrium with Type I eclogites are closely similar to those of volatile-rich small-volume mantle melts in the carbonatite-kimberlite spectrum commonly inferred to be responsible for mantle metasomatism. Although oxygen isotopes are often used to argue for a subduction origin of mantle eclogites, correlations between delta O-18 of garnet and typical metasomatic tracers suggest that the metasomatic process also has shifted the oxygen-isotope compositions of the Type I eclogites toward heavier values. Roberts Victor Type I eclogites thus carry the imprint of a metasomatic process that strongly modified their major-element, trace-element and isotopic compositions, while the more pristine Type II eclogites escaped this modification. Therefore, attempts to constrain the origin of Roberts Victor eclogites should not be based on the much more abundant Type I eclogites, which retain little geochemical memory of their protoliths. The most suitable materials for such investigations may be the less metasomatised, but more rare, Type II eclogites.
ISSN: 0016-7037

hal-00669867
https://hal.archives-ouvertes.fr/hal-00669867
DOI : 10.1016/j.gca.2011.08.035

Éditeur(s) : HAL CCSD Humana Press
Résumé : International audience
The sodium-proton exchanger 1 (NHE-1) is a membrane transporter that exchanges Na(+) for H(+) ion across the membrane of eukaryotic cells. It is cooperatively activated by intracellular protons, and this allosteric regulation is modulated by the biophysical properties of the plasma membrane and related lipid environment. Consequently, NHE-1 is a mechanosensitive transporter that responds to osmotic pressure, and changes in membrane composition. The purpose of this study was to develop the relationship between membrane surface tension, and the allosteric balance of a mechanosensitive transporter such as NHE-1. In eukaryotes, the asymmetric composition of membrane leaflets results in a difference in surface tensions that is involved in the creation of a reservoir of intracellular vesicles and membrane buds contributing to buffer mechanical constraints. Therefore, we took this phenomenon into account in this study and developed a set of relations between the mean surface tension, membrane asymmetry, fluid phase endocytosis and the allosteric equilibrium constant of the transporter. We then used the experimental data published on the effects of osmotic pressure and membrane modification on the NHE-1 allosteric constant to fit these equations. We show here that NHE-1 mechanosensitivity is more based on its high sensitivity towards the asymmetry between the bilayer leaflets compared to mean global membrane tension. This compliance to membrane asymmetry is physiologically relevant as with their slower transport rates than ion channels, transporters cannot respond as high pressure-high conductance fast-gating emergency valves.
ISSN: 1085-9195

inserm-00871709
http://www.hal.inserm.fr/inserm-00871709
http://www.hal.inserm.fr/inserm-00871709/document
http://www.hal.inserm.fr/inserm-00871709/file/art_3A10.1007_2Fs12013-012-9340-7.pdf
DOI : 10.1007/s12013-012-9340-7

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : Mid-ocean ridges magmatism is, by and large, considered to be mostly dry. Nevertheless, numerous works in the last decade have shown that a hydrous component is likely to be involved in ocean ridges magmas genesis and/or evolution. The petrology and geochemistry of peculiar coarse grained gabbros sampled in the upper part of the gabbroic sequence from the northern Oman ophiolite (Wadi Rajmi) provide information on the origin and fate of hydrous melts in fast-spreading oceanic settings. Uncommon crystallization sequences for oceanic settings (clinopyroxene crystallizing before plagioclase), extreme mineral compositions (plagioclase An% up to 99, and clinopyroxene Mg # up to 96), and the presence of magmatic amphibole, imply the presence of a high water activity during crystallization. Various petrological and geochemical constraints point to hydration, resulting from the recycling of hydrothermal fluids. This recycling event may have occurred at the top of the axial magma chamber where assimilation of anatectic hydrous melts is recurrent along mid-ocean ridges or close to segments ends where fresh magma intrudes previously hydrothermally altered crust. In ophiolitic settings, hydration and remelting of hydrothermally altered rocks producing hydrous melts may also occur during the obduction process. Although dry magmatism dominates oceanic magmatism, the dynamic behavior of fast-spreading ocean ridge magma chambers has the potential to produce the observed hydrous melts (either in ophiolites or at spreading centers), which are thus part of the general mid-ocean ridges lineage.
ISSN: 1525-2027

hal-00939400
https://hal.archives-ouvertes.fr/hal-00939400
DOI : 10.1002/ggge.20137

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Based on observations from both modem convergent margins and sandbox modeling, we examine the possible conditions favoring frontal accretion and/or frontal and basal tectonic erosion. Mean characteristic parameters (!.t, !.t* • and [) are used to discuss the mechanical stability of 28 transects across the frontal part of convergent margins where the Coulomb theory is applicable. Natural observations reveal that "typical accretionary wedges" are characterized by low tapers with smooth surface slope and subducting plate, low convergence rates and thick trench sediment, while "nonaccretionary wedges" display large tapers with irregular surface slopes and rough subducting plate, high convergence rates and almost no trench fill. Sandbox experiments were performed to illustrate the effects of seamounts/ridges in the subduction zone on the deformation of an accretionary wedge. These experiments show that a wedge of sand is first trapped and pushed in front of the seamount which acts as a moving bulldozer. This is followed by a tunnelling effect of the subducting seamount through the frontal wedge material, which results in considerable sand reworking. At an advanced subduction stage, the d6collement jumps back from a high level in the wedge to its former basal position. We conclude that a high trench sedimentation rate relative to the convergence rate leads to frontal accretion. In contrast, several conditions may favor tectonic erosion of the upper plate. First, oceanic features, such as grabens, seamounts or ridges, may trap upper plate material during their subduction process. Second, destabilization of the upper plate material by internal fluid overpressuring causing hydrofracturing is probably another important mechanism.
ISSN: 0148-0227

hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600/document
https://hal.archives-ouvertes.fr/hal-01261600/file/lallemandJGR1994.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyzed twelve fault gouge samples from the Bogd fault in south-western Mongolia to understand the origin and behavior of clay minerals. The investigation relies on x-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high energy synchrotron x-ray diffraction methods to investigate microstructure and preferred orientation. Smectite (montmorillonite), illite-smectite mixed layers, illite-mica and kaolinite are the major clay components, in addition to quartz and feldspars, which are present in all samples. The observations suggest that the protoliths and the fault rocks were highly altered by fluids. The fluid-rock interactions allow clay minerals to form, as well as alter feldspars to precipitate kaolinite and montmorillonite. Thus, newly formed clay minerals are heterogeneously distributed in the fault zone. The decrease of montmorillonite component of some of the highly deformed samples also suggests that dehydration processes during deformation were leading to illite precipitation. Based on synchrotron x-ray diffraction data, the degree of preferred orientation of constituent clay minerals is weak, with maxima for (001) ranging from 1.3 to 2.6 multiples of a random distribution (m.r.d). Co-existing quartz and feldspars have random orientation distributions. Microstructure and texture observations of the gouges from the foliated microscopic zone, alternating with micrometric isotropic clay-rich area, also indicate that the Bogd fault experienced brittle and ductile deformation episodes. The clay minerals may contribute to a slip weakening behavior of the fault.
ISSN: 0191-8141

insu-00667194
https://hal-insu.archives-ouvertes.fr/insu-00667194
DOI : 10.1016/j.jsg.2011.10.006

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Although semen is the principal vector of human immunodeficiency virus (HIV) dissemination worldwide, the origin of the infected leukocytes and free viral particles in this body fluid remain elusive. Here we review the accumulated evidence of the genital origin of HIV in semen from therapy naive individuals and men receiving suppressive highly active antiretroviral therapy (HAART), summarize the data on the detection and localization of HIV/SIV within the male genital tract, discuss the potential involvement of each genital tissue as a source of infected cells and virions in semen in the absence and presence of HAART, and suggest further studies. Deciphering the exact sources of HIV in semen will be crucial to improving HIV transmission prevention strategies.
ISSN: 0022-1899

hal-01121761
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01121761
PUBMED : 25414416
DOI : 10.1093/infdis/jiu328

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction processes play a major role in plate tectonics and the subsequent geological evolution of Earth. This special issue focuses on ongoing research in subduction dynamics to a large extent (oceanic subduction, continental subduction, obduction…) for both past and active subduction zones and into mountain building processes and the early evolution of orogens. It puts together various approaches combining geophysics (imaging of subduction zones), petrology/geochemistry (metamorphic analysis of HP-UHP rocks, fluid geochemistry and magmatic signal, geochronology), seismology and geodesy (present-day evolution of subduction zones, active tectonics), structural geology (structure and evolution of mountain belts), and numerical modelling to provide a full spectrum of tools that can be used to constrain the nature and evolution of subduction processes and orogeny. Studies presented in this special issue range from the long-term (orogenic cycle) to short-term (seismic cycle).
ISSN: 0264-3707

insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985/document
https://hal-insu.archives-ouvertes.fr/insu-01287985/file/rolland-2016.pdf
DOI : 10.1016/j.jog.2016.03.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The platinum-group element (PGE) systematics of continental mantle peridotites show large variability, reflecting petrogenetic processing of the upper mantle during partial melting and melt/fluid percolation inside the lithosphere. By removing Pd-Cu-Ni rich sulfides, partial melting events that have stabilized the sub-continental mantle lithosphere fractionated PPGEs (Palladium-group PGE; Pt, Pd) relative to IPGEs (Iridium-group PGE; Os, Ir, Ru, Rh). Residual base-metal sulfides (BMS) survive as enclosed IPGE-enriched Monosulfide Solid Solutions (Mss), which otherwise decompose into Ru-Os-Ir-rich refractory platinum-group minerals (PGMs) once the partial melts become S-undersaturated. The small-scale heterogeneous distribution of these microphases may cause extreme nugget effects, as seen in the huge variations in absolute PGE concentrations documented in cratonic peridotites. Magmas fluxing through the lithospheric mantle may change the initial PGE budgets inherited from the melting events, resulting in the great diversity of PGE systematics seen in peridotites from the sub-continental lithosphere. For instance, melt-rock reactions at increasing melt/rock ratios operate as open-system melting processes removing residual BMS/PGMs. Highly percolated peridotites are characterized by extreme PGE depletion, coupled with PGE patterns and Os-isotope compositions that gradually evolve toward that of the percolating melt. Reactions at decreasing melt-rock ratios (usually referred to as "mantle metasomatism") precipitate PPGE-enriched BMS that yield suprachondritic Pd/Ir and occasionally affect Pt/Ir and Rh/Ir ratios as well. Moreover, volatile-rich, small volume melts fractionate Os relative to Ir and S relative to Se, thereby producing rocks with supra-chondritic Os/Ir and S/Se coupled with supra-chondritic Pd/Ir and Pt/Ir. Major magmatic inputs at the lithosphere-asthenosphere boundary may rejuvenate the PGE systematics of the depleted mantle. Integrated studies of "refertilized" peridotites with worldwide provenance provide evidence for mixing between old PGM-rich harzburgitic protoliths and newly-precipitated BMS. Long-lived PGMs carry the Os-isotope compositions of ancient melt‐depletion events into seemingly undepleted fertile lherzolites. Another diagnostic feature of major refertilization processes is the increasing modal abundance of Pt-Pd-Te-Bi or Pt-As-S microphases. Due to regional-scale refertilization processes, sizeable (> 100 km) domains of the upper lithospheric mantle are now significantly enriched in Pd, Au, Cu, Se, and other incompatible chalcophile elements that are of considerable importance in PGE-ore forming events.
ISSN: 0024-4937

hal-00828626
https://hal.archives-ouvertes.fr/hal-00828626
DOI : 10.1016/j.lithos.2012.08.017

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The Lanzo peridotite massif is a fragment of oceanic lithosphere generated in an ocean-continent transition context and eclogitized during alpine collision. Despite the subduction history, the massif has preserved its sedimentary oceanic cover, suggesting that it may have preserved its oceanic structure. It is an exceptional case for studying the evolution of a fragment of the lithosphere from its oceanization to its subduction and then exhumation. We present a field and petrological study retracing the different serpentinization episodes and their impact on the massif structure. The Lanzo massif is composed of slightly serpentinized peridotites (<20% serpentinization) surrounded by an envelope of foliated serpentinites (100% serpentinization) bordered by oceanic metabasalts and metasedimentary rocks. The limit between peridotites and serpentinites defines the front of serpentinization. This limit is sharp: it is marked by the presence of massive serpentinites (80% serpentinization) and, locally, by dykes of metagabbros and mylonitic gabbros. The deformation of these gabbros is contemporaneous with the emplacement of the magma. The presence of early lizardite in the peridotites testifies that serpentinization began during the oceanization, which is confirmed by the presence of meta-ophicarbonates bordering the foliated serpentinite envelope. Two additional generations of serpentine occur in the ultramafic rocks. The first is a prograde antigorite that partially replaced the lizardite and the relict primary minerals of the peridotite during subduction, indicating that serpentinization is an active process at the ridge and in the subduction zone. Locally, this episode is followed by the deserpentinization of antigorite at peak P-T (estimated in eclogitized metagabbros at 2-2.5 GPa and 550-620 °C): it is marked by the crystallization of secondary olivine associated with chlorite and/or antigorite and of clinopyroxene, amphibole and chlorite assemblages. A second antigorite formed during exhumation partially to completely obliterating previous textures in the massive and foliated serpentinites. Serpentinites are an important component of the oceanic lithosphere generated in slow to ultraslow spreading settings, and in these settings, there is a serpentinization gradient with depth in the upper mantle. The seismic Moho limit could correspond to a serpentinization front affecting the mantle. This partially serpentinized zone constitutes a less competent level where, during subduction and exhumation, deformation and fluid circulation are localized. In this zone, the reaction kinetics are increased and the later steps of serpentinization obliterate the evidence of this progressive zone of serpentinization. In the Lanzo massif, this zone fully recrystallized into serpentinite during alpine subduction and collision. Thus, the serpentinite envelope represents the oceanic crust as defined by geophysicists, and the sharp front of serpentinization corresponds to an eclogitized seismic palaeo-Moho.
ISSN: 0263-4929

hal-00823051
https://hal.archives-ouvertes.fr/hal-00823051
DOI : 10.1111/jmg.12008

Éditeur(s) : HAL CCSD IODP
Résumé : The Superfast Spreading Crust campaign, echoing long-standing ocean lithosphere community endeavors, was designed to help us understand the formation, architecture, and evolution of ocean crust formed at fast spreading rates. Integrated Ocean Drilling Program (IODP) Expedition 335, "Superfast Spreading Rate Crust 4" (13 April-3 June 2011), was the fourth scientific drilling cruise of the Superfast Spreading Crust campaign to Ocean Drilling Program (ODP) Hole 1256D. The expedition aimed to deepen this basement reference site several hundred meters into the gabbroic rocks of intact lower oceanic crust to address the following fundamental scientific questions: Does the lower crust form by subsidence of a crystal mush from a high-level magma chamber (gabbro glacier), by intrusion of sills throughout the lower crust, or by some other mechanism? How does melt percolate through the lower crust, and what are the reactions and chemical evolution of magmas during migration? Is the plutonic crust cooled by conduction or hydrothermal circulation? What are the role and extent of deeply penetrating seawater-derived hydrothermal fluids in cooling the lower crust and the chemical exchanges between the ocean crust and the oceans? What are the relationships among the geological, geochemical, and geophysical structure of the crust and, in particular, the nature of the seismic Layer 2-3 transition? What is the magnetic contribution of the lower crust to marine magnetic anomalies?
https://hal.archives-ouvertes.fr/hal-00688990

hal-00688990
https://hal.archives-ouvertes.fr/hal-00688990
DOI : 10.2204/iodp.pr.335.2011

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
RATIONALE: Optimal management of complicated parapneumonic effusions (CPPE) remains controversial. OBJECTIVES: to assess safety and efficacy of iterative therapeutic thoracentesis (ITTC), the first-line treatment of CPPE in Rennes University Hospital. METHODS: Patients with CPPE were identified through our computerized database. We retrospectively studied all cases of CPPE initially managed with ITTC in our institution between 2001 and 2010. ITTC failure was defined by the need for additional treatment (i.e. surgery or percutaneous drainage), or death. RESULTS: Seventy-nine consecutive patients were included. The success rate was 81% (n = 64). Only 3 patients (4%) were referred to thoracic surgery. The one-year survival rate was 88%. On multivariate analysis, microorganisms observed in pleural fluid after Gram staining and first thoracentesis volume ≥450 mL were associated with ITTC failure with adjusted odds-ratios of 7.65 [95% CI, 1.44-40.67] and 6.97 [95% CI, 1.86-26.07], respectively. The main complications of ITTC were iatrogenic pneumothorax (n = 5, 6%) and vasovagal reactions (n = 3, 4%). None of the pneumothoraces required chest tube drainage, and no hemothorax or re-expansion pulmonary edema was observed. CONCLUSIONS: Although not indicated in international recommendations, ITTC is safe and effective as first-line treatment of CPPE, with limited invasiveness.
ISSN: 1932-6203

hal-00945622
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00945622
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00945622/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00945622/file/fetchObject.pdf
PUBMED : 24400113

Éditeur(s) : HAL CCSD University of Uludag
Résumé : International audience
The aim of this study was to compare the core temperature (TC) and markers of hydration status in athletes performing a half Ironman triathlon race in hot and humid conditions (27.2 ± 0.5°C, relative humidity was 80 ± 2%). Before and immediately after the 2012 Guadeloupe half Ironman triathlon, body mass and urine osmolality (mean ± SD) were measured in 19 well-trained male triathletes. TC was measured before and after the race, and at each transition during the event, using an ingestible pill telemetry system. Ambient temperature and heart rate (HR) were measured throughout the race. Mean ± SD performance time was 331 ± 36 minutes and HR was 147 ± 16 beats·min-1. Wet bulb globe temperature (WBGT) averaged 25.4 ± 1.0°C and ocean temperature was 29.5°C. The average TC at the beginning of the race (TC1) was 37.1 ± 0.7°C; it was 37.8 ± 0.9°C after swimming (TC2), 37.8 ± 1.0°C after cycling (TC3), and (TC4) 38.4 ± 0.7°C after running. Body mass significantly declined during the race by 3.7 ± 1.9 kg (5.0 ± 2.4%; p < 0.05), whereas urine osmolality significantly increased from 491.6 ± 300.6 to 557.9 ± 207.9 mosm·kg-1 (p < 0.05). Changes in body mass were not related to finishing TC or urine osmolality. Ad libitum fluid intake appears applicable to athletes acclimatized to tropical climate, when performing a half Ironman triathlon in in a warm and humid environment.
ISSN: 1303-2968

hal-01152333
https://hal.univ-antilles.fr/hal-01152333

Éditeur(s) : HAL CCSD
Résumé : National audience
Un ensemble de données sur l’environnement géologique despéridotites de la Zone Nord-Pyrénéenne a été obtenu dans lecadre des programmes ANR Pyramid et RGF-BRGM consacrésà l’évolution géodynamique des Pyrénées. Ces données représententdes contraintes indispensables pour l’étude des processus del’exhumation du manteau, de l’amincissement de la croûte continentaleet de sa disparition complète lors de l’ouverture desbassins transtensifs albo-cénomaniens. On y trouve : (1) de nouveauxlevés géologiques de détail autour des lherzolites de Lherz-Freychinède-Vicdessos-Bestiac-Prades et d’Urdach-Les Pernes et(2) des analyses multi-méthodes des métasédiments de la couvertureprérift et du socle paléozoïque adhérent au manteau :composition des assemblages du métamorphisme HT, températuresmaximales par spectrométrie RAMAN sur la m.o., fabriquede la calcite par EBSD, inclusions fluides et isotopes stables dansles marbres et veines associées, datations U-Th-Pb in situ. Cesdonnées permettent d’estimer les conditions thermiques lors de laremontée du manteau et de sa mise à l’affleurement. Nous montronsune variabilité remarquable de l’Ouest vers l’Est.A l’Ouest, le manteau est exhumé à l’Albien sup. - Cénomanieninf. en perçant une couverture mésozoïque prérift qui n’a pas étéchauffée à plus de 250C. La croûte continentale supérieure y estréduite en lames ductiles extrêmement amincies puis cataclaséeset remaniées sur le fond ultrabasique avec des fragments de manteauet de la couverture prérift, durant le dépôt du flysch noir. Latempérature augmente au cours du Cénomanien (480C) dans leszones où le manteau n’a pas été mis à l’affleurement. Le Triassupérieur se transforme profondément (talc-chlorites) et perd sacomposante évaporitique. La couverture prérift décollée joue unrôle majeur comme couvercle isotherme, suivi en cela par les flyschsalbiens puis cénomaniens.A l’Est, le manteau perce à travers une couverture chauffée localementà plus de 600C. Le Keuper y est réduit à quelquesdécimètres de grès et brèches riches en saphirine. La croûtesupérieure a été presque totalement éliminée tectoniquement, maisdes granulites sont remaniées à côté des péridotites et des marbresdans les brèches recouvrant le manteau exhumé.Ces données de terrain représentent les contraintes de base pourconstruire les modèles d’amincissement crustal. La variabilitémise en évidence (gradient thermique et présence ou absence decroûte profonde remaniée) ne permet pas de proposer un modèled’amincissement simple et unique. Cependant, toutes ces donnéesindiquent que la croûte moyenne à supérieure se comporteductilement sous les écrans thermiques de la couverture prériftet synrift, mobiles sur le Keuper. Un modèle de marge passivedistale faisant appel à des blocs continentaux rigides de type ”extensional allochthons ” ne peut s’appliquer ici. Sur la base deces données géologiques, nous mettons donc en avant un nouveaumodèle de type marge distale chaude plus ou moins transtensive.
RST 2016, livre des résumés
Caen, France

insu-01388463
https://hal-insu.archives-ouvertes.fr/insu-01388463

Éditeur(s) : HAL CCSD Elsevier
Résumé : To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions. First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers). Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures. The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow.
ISSN: 0040-1951

hal-00407576
https://hal.archives-ouvertes.fr/hal-00407576
DOI : 10.1016/j.tecto.2006.12.003

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The dissolution of carbonate rocks usually leads to both porosity (ϕ) and permeability (k) increase. We present experimental evidences and physical-based models of positive and anti-correlated dynamics of k and ϕ observed during dissolution experiments of carbonate rocks. We study the way the rate of change of ϕ and k is controlled by the degree of undersaturation of the percolating solution for two different types of carbonate rocks. We document the occurrence of an anti-correlated k−ϕ trend when the flowing fluid (deionized water) has a weak capacity of dissolution. A positive correlation is found when CO2 is added to the deionized water to increase the potential dissolution rate. Detailed analyses of the microstructures of the rock performed by X-ray microtomography reveal that low dissolution rate favors detachment of solid particles and their subsequent accumulation at the pore-throat inlet. Particles are detached from the rock matrix due to the differential dissolution rate of the indurated grains and the microporous cement. We then propose a simple phenomenological model to interpret the effect of the pore-throat clogging by the accumulation of partially dissolved carbonate particles. We conjecture that permeability is controlled by the decrease of the effective hydraulic radius and the increase of the tortuosity due to partial and localized obstruction of the pore network. Conversely, increasing the level of undersaturation of the flowing solution leads to an augmented potential of dissolving most of the transported particles before they reach the throats. In this case, both k and ϕ increase and display power-law correlations.
ISSN: 0169-3913

hal-01174145
https://hal.archives-ouvertes.fr/hal-01174145
DOI : 10.1007/s11242-015-0456-2