Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
Abstract The continuous record of large surface-rupturing earthquakes along the Dead Sea fault brings unprecedented insights for paleoseismic and archaeoseismic research. In most recent studies, paleoseismic trenching documents the late Holocene faulting activity, while tectonic geomorphology addresses the long-term behavior (>10 ka), with a tendency to smooth the effect of individual earthquake rupture events (Mw >7). Here, we combine historical, archaeological, and paleoseismic investigations to build a consolidated catalog of destructive surface-rupturing earthquakes for the last 14 ka along the left-lateral Jordan Valley fault segment. The 120- km-long fault segment limited to the north and the south by major pull-apart basins (the Hula and the Dead Sea, respectively) is mapped in detail and shows five subsegments with narrow stepovers (width < 3 km). We conducted quantitative geomorphology along the fault, measured more than 20 offset drainages, excavated four trenches at two sites, and investigated archaeological sites with seismic damage in the Jordan Valley. Our results in paleoseismic trenching with 28 radiocarbon datings and the archaeoseismology at Tell Saydiyeh, supplemented with a rich historical seismic record, document 12 surface-rupturing events along the fault segment with a mean interval of ∼1160 yr and an average 5 mm=yr slip rate for the last 25 ka. The most complete part of the catalog indicates recurrence intervals that vary from 280 yr to 1500 yr, with a median value of 790 yr, and suggests an episodic behavior for the Jordan Valley fault. Our study allows a better constraint of the seismic cycle and related short-term variations (late Holocene) versus long-term behavior (Holocene and late Pleistocene) of a major continental transform fault.
ISSN: 0037-1106

hal-00747401
https://hal.archives-ouvertes.fr/hal-00747401
DOI : 10.1785/0120100097

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The Ganos fault is the westernmost segment of the North Anatolian Fault that experienced the Mw = 7.4 earthquake of 9 August 1912. The earthquake revealed 45-km-long of surface ruptures inland, trending N70 E, and 5.5 m of maximum right lateral offset near Güzelköy. The long-term deformation of the fault is clearly expressed by several pull-apart basins and sag ponds, pressure and shutter ridges and offset streams. In parallel with detailed geomorphologic investigations, we measured co-seismic and cumulative displacements along the fault, and selected the Güzelköy site for paleoseismology. A microtopographic survey at the site yields 10.5 0.5 m and 35.4 1.5 m cumulative lateral offsets of stream channels and geomorphologic features. Seven paleoseismic parallel and cross-fault trenches document successive faulting events and provide the timing of past earthquakes on the Ganos fault segment. Radiocarbon dating of successive colluvial wedges in trench T1, and the fresh scarplet above (probably 1912 surface rupture) indicate the occurrence of three faulting events since the 14th century. Parallel trenches (3, 5, 6 and 7) expose paleo-channels and show a cumulative right-lateral offset of 16.5 1.5 m next to the fault, and 21.3 1.5 m total channel deflection. Radiocarbon dating of past channel units and fault scarp-related colluvial deposits imply an average 17 +/ 5 mm/year slip rate and 323 142 years recurrence interval of large earthquakes during the last 1000 years on the Ganos fault. The succession of past faulting events and inferred slip rate west of the Marmara Sea provide more constraint on the long-term faulting behavior in the seismic gap of the North Anatolian Fault and may contribute to a better seismic hazard assessment in the Istanbul region.
ISSN: 1525-2027

hal-00748218
https://hal.archives-ouvertes.fr/hal-00748218
DOI : 10.1029/2011GC003960

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mosha and North Tehran faults correspond to the nearest seismic sources for the northern part of the Tehran megacity. The present-day structural relationships and the kinematics of these two faults, especially at their junction in Lavasanat region, is still a matter of debate. In this paper, we present the results of a morphotectonic analysis (aerial photos and field investigations) within the central part of the Mosha and eastern part of the North Tehran faults between the Mosha valley and Tehran City. Our investigations show that, generally, the traces of activity do not follow the older traces corresponding to previous long-term dip-slip thrusting movements. The recent faulting mainly occurs on new traces trending E-W to ENE-WSW affecting Quaternary features (streams, ridges, risers, and young glacial markers) and cutting straight through the topography. Often defining en-echelon patterns (right- and left-stepping), these new traces correspond to steep faults with either north- or south-dipping directions, along which clear evidences for left-lateral strike-slip motion are found. At their junction zone, the two sinistral faults display a left-stepping en-echelon pattern defining a positive flower structure system clearly visible near Ira village. Further west, the left-lateral strike-slip motion is transferred along the ENE-WSW trending Niavaran fault and other faults. The cumulative offsets associated with this left-lateral deformation is small compared with the topography associated with the previous Late Tertiary thrusting motion, showing that it corresponds to a recent change of kinematics.
ISSN: 0040-1951

hal-00617778
https://hal.archives-ouvertes.fr/hal-00617778
DOI : 10.1016/j.tecto.2010.09.013

Éditeur(s) : HAL CCSD
Résumé : The aim of this thesis is to analyze the variations in slip rates along strike-slip faults, in intracontinental domain, producing large earthquakes (M > 7.5). To illustrate these variations, this work has focused in two area located in the most tectonically active continental domains in the world: in the western part of Mongolia (Bogd and Bulnay faults) and in the northern part of Iran (Astaneh and Tabriz faults). Using morphotectonic and paleoseismological analyses, the kinematics, the slip rates and the recurrence times have been estimated and allow us to describe the characteristics of seismic cycle along these faults. In Mongolia, the slip rates are estimated at ~ 1,2 and ~ 2,6 mm/yr along the Bogd and the Bulnay faults, respectively, with no variations of geological slip rates over the late Pleistocene-Holocene period. These two faults present characteristic slips and similar recurrence times between large earthquakes. The paleoseismological investigations suggest that a cluster occurred 3000 years ago, similar to the seismic cluster recorded in Mongolia during the XX century. In Iran, the slip rate was estimated to 2 mm/yr along the Astaneh fault and the recurrence times are ranging from 1600 to 2200 years, associated with offsets comprised between 3 and 4,5 m. We have also estimated a slip rate of ~ 7 mm/yr along the Tabriz fault, in agreement with the present day rate estimated by GPS, suggesting no variations in the slip rate over the past 45 ka.
Ce travail de thèse a pour but d'analyser les variations de vitesses sur des grandes failles décrochantes en contexte intracontinental, capables de produire des séismes de très fortes magnitudes (M > 7.5). Afin d'illustrer ces variations d'activités, cette analyse a été effectuée sur deux zones d'études situées en domaine continental et sismiquement actives: la région ouest de la Mongolie (failles de Bogd et Bolnay) et le nord de l'Iran (failles d'Astaneh et de Tabriz). À partir d'une approche morphotectonique et paléosismologique, les cinématiques, les vitesses de failles et les intervalles de récurrence entre les séismes majeurs ont été estimés, permettant d'analyser les caractéristiques du cycle sismique sur chacune des failles. En Mongolie, les failles de Bogd et Bolnay présentent respectivement des vitesses de ~ 1,2 et 2,6 mm/an, qui semblent être constantes sur la période Pleistocène supérieur-Holocène. Ces deux failles présentent également des glissements caractéristiques et des intervalles de temps similaires entre les séismes majeurs. Les analyses paléosismologiques suggèrent qu'un essaim sismique comparable à celui enregistré au XXème siècle a eu lieu il y a environ 3000 ans. En Iran, une vitesse géologique de 2 mm/an a été estimée sur la faille d'Astaneh et les données paléosismologiques suggèrent des intervalles de récurrence de 1800 ans, associés à des déplacements en surface compris entre 3 et 4,5 m. Nous avons également estimé une vitesse de 7 mm/an sur la faille de Tabriz, en accord avec les données GPS, suggérant que la vitesse sur cette faille est constante depuis 45 ka.
https://tel.archives-ouvertes.fr/tel-00591794

tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794/document
https://tel.archives-ouvertes.fr/tel-00591794/file/these_rizza.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use a strike-slip fault analog model to study experimentally the role played by along-fault non-uniform and asymmetric applied normal stress on both coseismic slip and long-term fault behavior. Our model is based on a visco-elasto-plastic multi-layered rheology that allows to produce several hundreds of scaled analog microquakes and associated seismic cycles. Uniform or heterogeneous applied normal stress along the fault plane is imposed and maintained constant during the whole experiment durations. Our results suggest that coseismic slip patterns are strongly controlled by spatial normal stress variations and subsequent accumulated shear stress along fault strike. Major microquakes occur preferentially in zones of major shear stress asperities. Coseismic slip distributions exhibit a pattern similar to the along-fault applied normal stress distribution. The occurrence of isolated low to moderate microquakes where residual stresses persist around secondary stress asperities, indicates that stress conditions along the fault also control the whole variability of fault slip events. Moreover, when fault slip stability conditions are modulated by normal stress distribution, our experiments suggest that the along-fault stress heterogeneity influences the seismic cycle regularity and, consequently, long-term fault slip behavior. Uniform applied normal stress favors irregular seismic cycles and the occurrence of earthquakes clustering, whereas non-uniform normal stress with a single high amplitude stress asperity generates strong characteristic microquake events with stable return periods. Together our results strengthen the assumption that coseismic slip distribution and earthquake variability along an active fault may provide relevant information on long term tectonic stress and could thus improve seismic hazard assessment.
ISSN: 0012-821X

hal-01666379
https://hal.archives-ouvertes.fr/hal-01666379
DOI : 10.1016/j.epsl.2017.10.009

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We carried out morphotectonic studies along the left-lateral strike-slip Bogd Fault, the principal structure involved in the Gobi-Altay earthquake of 1957 December 4 (published magnitudes range from 7.8 to 8.3). The Bogd Fault is 260 km long and can be subdivided into five main geometric segments, based on variation in strike direction. West to East these segments are, respectively: the West Ih Bogd (WIB), The North Ih Bogd (NIB), the West Ih Bogd (WIB), the West Baga Bogd (WBB) and the East Baga Bogd (EBB) segments. Morphological analysis of offset streams, ridges and alluvial fans-particularly well preserved in the arid environment of the Gobi region-allows evaluation of late Quaternary slip rates along the different faults segments. In this paper, we measure slip rates over the past 200 ka at four sites distributed across the three western segments of the Bogd Fault. Our results show that the left-lateral slip rate is similar to 1 mm yr(-1) along the WIB and EIB segments and similar to 0.5 mm yr(-1) along the NIB segment. These variations are consistent with the restraining bend geometry of the Bogd Fault.;Our study also provides additional estimates of the horizontal offset associated with the 1957 earthquake along the western part of the Bogd rupture, complementing previously published studies. We show that the mean horizontal offset associated with the 1957 earthquake decreases progressively from 5.2 m in the west to 2.0 m in the east, reflecting the progressive change of kinematic style from pure left-lateral strike-slip faulting to left-lateral-reverse faulting. Along the three western segments, we measure cumulative displacements that are multiples of the 1957 coseismic offset, which may be consistent with a characteristic slip. Moreover, using these data, we re-estimate the moment magnitude of the Gobi-Altay earthquake at M-w 7.78-7.95.;Combining our slip rate estimates and the slip distribution per event we also determined a mean recurrence interval of similar to 2500-5200 yr for past earthquakes along the different segments of the western Bogd Fault. This suggests that the three western segments of the Bogd Fault and the Gurvan Bulag thrust fault (a reverse fault bounding the southern side of the Ih Bogd range that ruptured during the 1957 earthquake) have similar average recurrence times, and therefore may have ruptured together in previous earthquakes as they did in 1957. These results suggest that the western part of the Bogd Fault system, including the Gurvan Bulag thrust fault, usually behaves in a 'characteristic earthquake' mode.
ISSN: 0956-540X

hal-00639467
https://hal.archives-ouvertes.fr/hal-00639467
https://hal.archives-ouvertes.fr/hal-00639467v2/document
https://hal.archives-ouvertes.fr/hal-00639467/file/rizzaGJI2011.pdf
DOI : 10.1111/j.1365-246X.2011.05075.x

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : During the GWADASEIS cruise (Lesser Antilles volcanic arc, February-March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. Pb-210 and Cs-137 activities lack in the massive sands, while a normal profile of unsupported Pb-210 decrease is observed in the hemipelagite below, together with a Cs-137 peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M-w = 6.3 and M-w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from Pb-210 decrease curve (0.5 mmyr(-1)) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M-6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards And Earth System Sciences (1561-8633) (Copernicus Gesellschaft Mbh), 2012 , Vol. 12 , N. 5 , P. 1755-1767

Droits : Author(s) 2012. CC Attribution 3.0 License.
http://archimer.ifremer.fr/doc/00089/20040/21990.pdf
DOI:10.5194/nhess-12-1755-2012
http://archimer.ifremer.fr/doc/00089/20040/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : Elsevier Science Bv
Résumé : The rollback of a segmented slab of oceanic lithosphere is typically accompanied by vertical lithospheric tear fault(s) along the lateral slab edge(s) and by strike slip movement in the upper plate, defined as a STEP fault (Subduction Tear Edge Propagator). The Neogene evolution of the Central Mediterranean is dominated by the interaction between the slow Africa–Eurasia convergence and the SE-ward rollback of the Ionian slab, that leads to the back-arc opening of the Tyrrhenian Sea. Here, we present post-stack time migrated and pre-stack depth migrated Archimede (1997) multichannel seismic lines, that were acquired offshore eastern Sicily, at the foot of the Malta escarpment. First, we identify the recent deformation along the lateral ramp of the Calabrian accretionary wedge. Towards the east, the Calabrian wedge is formed by the accretion of the post-evaporitic sediments, above a decollement at the base of the Messinian evaporites. At the latitude of Syracuse, 50 km east of the Malta escarpment, a major N150°E trending crustal scale and vertical fault slices through the entire accretionary wedge. This fault cuts by several kilometers, through the pre-evaporitic Messinian sediments and into the basement. The vertical offset along this vertical fault decreases from north to south, and the fault is no longer observed on the seismic lines, 50 km SE of the Alfeo seamount. A previously published Moho depth isocontour map, offshore Sicily and the recent GPS data, combined with the presence of strike slip movements NE onshore Sicily, allow us to identify this 200 km long crustal-scale fault as the surface expression of a STEP fault. The presence of syntectonic Pleistocene sediments on top this crustal-scale fault suggests a recent lithospheric vertical movement of the STEP fault, in response to the rollback of the Ionian slab and to the SE-ward advance of the Calabria-Peloritan block
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-08 , Vol. 602 , P. 141-152

Droits : 2013 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00118/22878/21386.pdf
DOI:10.1016/j.tecto.2012.12.026
http://archimer.ifremer.fr/doc/00118/22878/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We recover the Holocene earthquake history of seven seismogenic normal faults in the Fucino system, central Italy. We collected 800 samples from the well-preserved limestone scarps of the faults and modeled their 36Cl concentrations to derive their seismic exhumation history. We found that > 30 large earthquakes broke the faults in synchrony over the last 12 ka. The seven faults released strain at the same periods of time, 12-9 ka, 5-3 ka, and 1.5-1 ka. On all faults, the strain accumulation and release occurred in 3-6 ka supercycles, each included a 3-5 ka phase of slow (≤ 0.5-2 mm/yr) strain accumulation in relative quiescence, followed by a cluster of three to four large earthquakes or earthquake sequences that released most of the strain in < 1-2 ka. The large earthquakes repeated every 0.5 ± 0.3 ka during the paroxysmal phases and every 4.3 ± 0.9 ka between those phases. Earthquakes on the northern faults produced twice larger surface slips (~ 2 m) and had larger magnitudes (Mw 6.2-6.7) than those on the southern faults. On most faults, the relative strain level was found to control the amount of slip and the time of occurrence of the next large earthquake. Faults entered a phase of clustered activity once they had reached a specific relative strain threshold. The Tre Monti fault is identified as the most prone to break over the next century. Our data document earthquake synchrony and clustering at a broader space and time scale than has been reported to date.
ISSN: 0148-0227

hal-00903460
https://hal.archives-ouvertes.fr/hal-00903460
DOI : 10.1002/jgrb.50299

Éditeur(s) : Amer Geophysical Union
Résumé : The oblique convergence between North American and Caribbean plates is accommodated in a bookshelf faulting manner by active, oblique-normal faults in the northern part of the Lesser Antilles arc. In the last 20 years, two M > 6 earthquakes occurred along a large, arc parallel, en echelon fault system, the 16 March 1985 in Redonda and 21 November 2004 in Les Saintes. A better understanding of active faulting in this region permit us to review the location and magnitude of historical earthquakes by using a regional seismic attenuation law. Several others moderate earthquakes may have occurred along the en echelon fault system implying a strong seismic hazard along the arc. These faults control the effusion of volcanic products and some earthquakes seem to be correlated in time with volcanic unrest. Shallow earthquakes on intraplate faults induced normal stress and pressure changes around neighboring volcano and may have triggered volcanic activity. The Redonda earthquake could have initiated the 1995 eruption of Montserrat's Soufriere Hills by compressing its plumbing system. Conversely, pressure changes under the volcano increased Coulomb stress changes and brought some faults closer to failure, promoting seismicity. We also discuss the magnitude of the largest 11 January 1839 and 8 February 1843 megathrust interplate earthquakes. We calculate that they have increased the stress on some overriding intraplate faults and the extensional strain beneath several volcanoes. This may explain an increase of volcanic and seismic activity in the second half of the 19th century culminating with the devastating, 1902 Mount Pelee eruption.
Journal Of Geophysical Research-solid Earth (0148-0227) (Amer Geophysical Union), 2011-10 , Vol. 116 , N. B10308 , P. 1-26

Droits : Copyright 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00200/31097/29515.pdf
DOI:10.1029/2011JB008443
http://archimer.ifremer.fr/doc/00200/31097/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To estimate the seismic hazard, the geometry (dip, length and orientation) and the dynamics (type of displacements and amplitude) of the faults in the area of interest need to be understood. In this paper, in addition to geomorphologic observations, we present the results of two ground penetrating radar (GPR) campaigns conducted in 2010 and 2011 along the Emeelt fault in the vicinity of Ulaanbaatar, capital of Mongolia, located in an intracontinental region with low deformation rate that induces long recurrence time between large earthquakes. As the geomorphology induced by the fault activity has been highly smoothed by erosion processes since the last event, the fault location and geometry is difficult to determine precisely. However, by using GPR first, a non-destructive and fast investigation, the fault and the sedimentary deposits near the surface can be characterized and the results can be used for the choice of trench location. GPR was performed with a 50 MHz antenna over 2-D lines and with a 500 MHz antenna for pseudo-3-D surveys. The 500 MHz GPR profiles show a good consistency with the trench observations, dug next to the pseudo-3-D surveys. The 3-D 500 MHz GPR imaging of a palaeochannel crossed by the fault allowed us to estimate its lateral displacement to be about 2 m. This is consistent with a right lateral strike-slip displacement induced by an earthquake around magnitude 7 or several around magnitude 6. The 2-D 50 MHz profiles, recorded perpendicular to the fault, show a strong reflection dipping to the NE, which corresponds to the fault plane. Those profiles provided complementary information on the fault such as its location at shallow depth, its dip angle (from 23 • to 35 •) and define its lateral extension. Central Asia is known for its high level of seismic hazards, especially Mongolia, which has been one of the most seismically active intracontinental regions in the world with four large earthquakes (magnitude around 8) along its active faults in the western part of the country during the last century (Khilko et al. 1985). The deformation in Mongolia is located between compressive structures related to the collision and penetration of the Indian plate into the Eurasian plate and extensive structures in the north of the country related with the Baykal rift (Tapponnier & Molnar 1979; Baljinnyam et al. 1993; Schlupp 1996; Bayasgalan & Jackson 1999). The seismic activity observed in the vicinity of Ulaanbaatar (UB), capital of Mongolia, is relatively low compared to the activity observed in western Mongolia. Nevertheless, since 2005, the seismic activity around UB not only has increased, but is also organized (see Fig. 1) at the west of UB along two perpendicular directions, which determine two active faults: Emeelt fault, discovered in 2008 (NNW-SSE direction, 25-km-long minimum and situated about 10 km W of UB) and Hustai fault (WSW–ENE direction, 80 km long, with its NE tip at less than 20 km west of UB); their length and morphology indicate that they can produce earthquakes of magnitude 6.5–7.5 (Schlupp et al. 2012). Most of the Mongolian population (1.2 million over 3 million) is concentrated at UB, which is the main political and economical centre of the country. Hence, the study of seismic hazard and the estimation of the probability of future destructive earthquakes are of primary importance for the country (Dugarmaa et al. 2006). Since the last large earthquake, the faults geomorphology has been highly smoothed by erosional processes and the exact location of the fault plane surface rupture is thus hidden within a several metre wide strip. The GPR method has been proven to give good and useful results to characterize faults by identifying offsets of radar reflections (Malik et al. 2007; Christie et al. 2009; Yalçiner et al. 2013) and
ISSN: 0956-540X

hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629/document
https://hal.archives-ouvertes.fr/hal-01342629/file/Dujardin_Bano_etal_Geoph.%20J.%20Int._2014_final.pdf
DOI : 10.1093/gji/ggu130

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyzes the active tectonics within the northwestern and southeastern extensions of the Pambak-Sevan-Syunik fault (PSSF), a major right-lateral strike-slip fault cutting through Armenia. Quantifying the deformations in terms of geometry, kinematics, slip rates and earthquake activity, using cosmogenic 3He, OSL/IRSL and radiocarbon dating techniques, reveal different behaviors between the two regions. Within the northwestern extension, in the region of Amasia, the PSSF bends to the west and splits into two main WNW–ESE trending reverse faults defining a compressional pop-up structure. We estimate an uplift rate and a shortening rate of 0.5 ± 0.1 mm/y and 1.4 ± 0.6 mm/y, respectively. This suggests that most of the ∼2 mm/y right lateral movement of the PSSF seems to be absorbed within the Amasia pop-structure. Within the southeastern extension, the PSSF shows signs of dying out within the Tsghuk Volcano region at the southernmost tip of the Syunik graben. There, the tectonic activity is characterized by a very slow NS trending normal faulting associated with a slight right-lateral movement. Slip rates analyses (i.e. vertical slip rate, EW stretching rate at 90° to the fault, and right-lateral slip rate of ∼0.2 mm/y, ∼0.1 mm/y and ∼0.05 mm/y, respectively) lead to the conclusion that the right lateral movement observed further north along the PSSF is mainly transferred within other active faults further west within the Karabagh (Hagari fault or other structures further northwestwards). Comparing our slip rates with those estimated from GPS data suggests that most of the deformation is localized and seismic, at least within the Tsghuk region. The geometrical and kinematic pattern observed within the two terminations of the PSSF suggests that the fault and its surrounding crustal blocks are presently rotating anticlockwise, as also observed within the GPS velocity field. This is consistent with the recent kinematic models proposed for the Caucasus-Kura-South Caspian region and brings a new insight into the present geodynamics of Armenia.
ISSN: 1040-6182

hal-01307342
https://hal.archives-ouvertes.fr/hal-01307342
DOI : 10.1016/j.quaint.2015.05.021

Éditeur(s) : HAL CCSD Universidad Complutense de Madrid
Résumé : Based on new seismological and recent faulting data, we analyze five main sectors in the western part of the Betic Cordillera from an active tectonic perspective: i. The northwestern frontal sector of the cordillera, including the Morón de la Frontera area, with shallow (< 15 km depth) seismogenic active NE-SW reverse and strike-slip faults that do not reach the surface. ii. The Teba area, in the External Zones, which is deformed by sparse N-S to NW-SE normal faults with associated wedges of Quaternary sediments and active strike-slip faults at intermediate crustal levels. iii. The Ronda Basin, representing the major Late Miocene intramontane basin of the western Betic Cordillera, is mainly deformed by NNE-SSW and WNW-ESE folds and locally by NW-SE normal faults. iv. The internal part of the orogen, which is characterized by shallow (<40 km) and intermediate (40 to 120 km depth) seismicity beneath Málaga and the Alborán Sea, ENE-WSW folding, relief uplift, river incision and scarce active faults with surface expression. v. The Spanish Atlantic coast, which coincides with the western end of the Betic orogen, where Pliocene to Quaternary shallowmarine sedimentary rocks are deformed by meso-scale NW-SE oriented normal faults and few ENE-WSW reverse faults. These data support the recent tectonic activity of the western Betic Cordillera determined by the NW-SE Eurasian-African convergence with variable features from the mountain front, characterized by shallow deformations, up to the Internal Zones that mainly undergo uplift and intermediate seismicity.
ISSN: 1698-6180

hal-00750359
https://hal.archives-ouvertes.fr/hal-00750359
DOI : 10.5209/rev_JIGE.2012.v38.n1.39211

Éditeur(s) : HAL CCSD
Résumé : This thesis aims to analyze the active tectonics and the seismic hazard for three main cities of NW Iran (Tehran, Tabriz and Zandjan) using morphotectonics and paleoseismology. Within the Tehran capital, we focused our analysis on the Mosha-North Tehran (M-NT) active fault system. Our investigations show that this fault system is mainly dominated by left-lateral faulting. Along the eastern part of the M-NT fault system, we found evidences of at least seven strong (M>7) paleoearthquakes during the past 10 ka (recurrence interval : 1100-1400 yrs). Our study along the central portion of the fault system (in Abali region) suggests that it corresponds probably to the source of the 1830 AD historical earthquake (M=7.1, Io= IX). Within Tabriz region, we studied the SE segment of the North Tabriz fault. We found evidences of at least three strong events, which occurred during the past 33.5 ka. The North Tabriz dextral fault corresponds to the central portion of a fault system (TFS), and contains two fault segments (NW and SE). Our paleoseismological analysis shows a variation of the slip rate, which decreases from NW to SE along the strike-slip fault. The western (Mishu) and eastern (Bozghush) terminations of the fault system correspond to oblique-compression zones. TFS belongs to the eastern portion of a regional fault system (GSKT), linking the active extension within the central part of the collision and the active compression to the East. Finally, we focus on the Zandjan area, where no important historical seismicitiy is recorded. There, based on morphotectonics analysis we discovered a large active fault network, whose southeastern part affects the Zandjan city. To conclude this work, we replace our observations within the general geodynamic framework of the Arabia- Eurasia collision. One of the striking pictures is the occurrence of opposite kinematics along the M-NT (and other range parallel faults within the south Central Alborz) and the North Tabriz fault systems that have the same trend. This shows the rapid variation of the regional stress field in the Northern Iran.
L'objectif de ce mémoire de thèse est l'étude de la tectonique récente et l'évaluation de l'aléa sismique pour trois villes importante, Téhéran, Tabriz et Zandjan, situées dans le nord-ouest de l'Iran. Dans la capitale de l'Iran, Téhéran, nous nous sommes concentrés sur le système de faille active de Mosha-Nord Téhéran. Nos travaux démontrent que ce système est essentiellement décrochant sénestre. Nos analyses paléosismologiques sur la portion est de ce système (dans la vallée de Tar) montrent au minimum les évidences de sept grands événements sismiques (M>7) pendant les derniers 10000 ans (l'intervalle de récurrence est de 1100 à 1400 ans). Les études que nous avons mené dans la partie centrale de ce système (région d'Abali) révèlent qu'il pourrait être la source du dernier événement sismique ayant affecté la ville de Téhéran en 1830 AD. Dans la région de Tabriz, nous nous sommes intéressés au segment SE de la faille décrochante dextre de Nord Tabriz où nous avons trouvé les évidences de trois grands séismes pendant les derniers 33500 ans. Nos études montrent que la faille Nord Tabriz qui est la portion centrale d'un système de faille (TFS) est constituée par deux segments NW et SE dextres. Notre étude paléosismologique suggère une variation de la vitesse qui diminue du NW vers SE le long de ces segments. Les extrémités ouest (Mishu) et est (Bozghush) de ce système correspondent à des zones compressives qui absorbent les déplacements horizontaux sur les segments NW et SE. D'un point de vue général la TFS est une partie d'un système de failles régionales (GSKT) qui relie une zone d'extension active dans la partie centrale de la collision Arabie-Eurasie et une zone de compression active à l'Est. Enfin, à Zandjan qui est une ville située dans une région de lacune sismique, nous avons découvert un important réseau de failles actives. Le tracé sud-est de ce réseau de failles passe par la ville de Zandjan. En conclusion, les localisations et les cinématiques des systèmes de faille étudiés sont discutées dans le cadre géodynamique général de la collision Arabie-Eurasie. On remarquera que la faille majeure de Nord Tabriz qui correspond essentiellement à un décrochement dextre a la même direction NW-SE que les décrochements sénestres présents dans la chaîne de l'Alborz (les failles de : Mosha, Talaghan et Manjil). Cette observation nécessite une variation de la direction de compression entre ces deux régions.
https://tel.archives-ouvertes.fr/tel-00539739

tel-00539739
https://tel.archives-ouvertes.fr/tel-00539739
https://tel.archives-ouvertes.fr/tel-00539739/document
https://tel.archives-ouvertes.fr/tel-00539739/file/thesesoleymani.pdf

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This paper presents a synthesis of a multidisciplinary study carried out along the Nîmes Roman aqueduct, located in the southeast part of France. The study was motivated by archaeologists attempting to explain the partial destructions of only one aerial bridge of the aqueduct (Pont de la Lône). Given its close proximity to the Nîmes seismically active fault, a possible seismic origin for the destructions was invoked. Seismologists and structural engineers thus carried out a variety of field and numerical investigations to test the seismic hypothesis. Supporting field evidence was found first along the aerial bridge section of the aqueduct: broken stalactites, arch warping, cracks and destruction of the bridge just above a breast wall shortly after its construction. Secondly, the underground part of the canal was analysed: irregularity in the thickness of calcite deposits of the canal walls, presence of numerous cracks, horizontal shift of the otherwise linear structure of the canal and presence of calcite twins in the deposits, found only where the canal crosses the Nîmes fault system. Numerical modelling and experimental results show that (1) only the Pont de la Lône would have suffered serious damage under seismic solicitation (assuming an M6 earthquake at 10 km distance). The second aerial bridge, the three levels arches Pont du Gard, an historical monument still standing today, would have suffered less damage, due to its very different fundamental frequency of around 0.4 Hz, far from the amplified seismic near-field spectrum; (2) the numerical models also show that a fall of the canal wall would require a higher magnitude event (M > 6); (3) the presence of calcite twinning requires a differential static stress of 4 MPa or greater, which can only be achieved very close to the fault rupture of a M > 6 earthquake; (4) finally, local surface rupturing of such a fault would also corroborate the hypothesis that the observed offset of the canal may be partly seismically induced. Although other possible origins for each individual evidence may not be excluded, the observed spatiotemporal concentration of architectural/geological anomalies together with the numerical results allow us to support a possible co-seismic origin for these disorders, indirectly attesting to the potential seismic activity (M > 6) of the nearby Nîmes fault. Furthermore, following the conclusions of archaeological studies, the disorders occurred between 250 and 350 year AD, thus providing timing for this possible seismic event, an essential parameter in seismic hazard analysis. These results validate the archaeo-seismological approach as a tool that may help improve the knowledge of major infrequent earthquakes in areas of moderate seismic activity.
ISSN: 0921-030X

hal-00379064
https://hal.archives-ouvertes.fr/hal-00379064
DOI : 10.1007/s11069-008-9276-9