Éditeur(s) : HAL CCSD
Résumé : Inorganic arsenic is an environmental human carcinogen, but is also studied these days because of its potential effectiveness in curing chronic inflammatory disease. Indeed, this metalloid possesses immunosuppressive properties which can dysregulate physiological mechanisms involved in immune defense, or reduce inflammation associated with those inflammatory diseases. Inorganic arsenic is known mainly to alter functions of T cells and macrophages. However, it is unknown whether arsenic targets dendritic cells (DCs). Yet, this antigen presenting cells plays a major role in the immunosurveillance, and is involved in the physiopathology of chronic inflammatory diseases. So, the aim of my thesis work was to study the effects of inorganic arsenic on in vitro differenciation and maturation of dendritic cells from human monocytes. Our results mainly shows that concentrations corresponding to those measured in environmentally exposed people, inhibits DCs secretion of proinflammatory cytokines, which plays a major role in activation and polarization of T cells. Particularly, arsenic strongly impairs expression and secretion of interleukine 12 (IL-12) by an underlying molecular mechanism involving Nrf2. Finally, this work shows that inorganic arsenic has immunosuppressive properties on the physiology in vitro of human dendritic cells. Immunotoxicity may then contribute to the metalloid toxicity in environmentally exposed people. This element could be taken into account when determining arsenic effects in curing some chronic inflammatory diseases.
L’arsenic inorganique est un contaminant environnemental, cancérogène pour l’homme, mais également un métalloïde étudié, aujourd’hui, dans le traitement de maladies inflammatoires chroniques. Il possède des propriétés immunosuppressives pouvant déréguler les mécanismes physiologiques de défense ou bloquer l’exacerbation de réponses inflammatoires chroniques. L’arsenic inorganique altère principalement les fonctions des lymphocytes T et des macrophages. En revanche, l’impact du métalloïde sur la physiologie des cellules dendritiques (DCs) est peu connu. Pourtant, ces cellules présentatrices d’antigène jouent un rôle fondamental dans les processus d’immunosurveillance et sont très impliquées dans la physiopathologie des maladies inflammatoires chroniques. Dans ce contexte, les objectifs de mon travail de thèse étaient d’étudier les effets de l’arsenic inorganique sur la différenciation et la maturation in vitro de DCs générées à partir de monocytes humains. Nos résultats démontrent principalement que des concentrations de métalloïde, compatibles avec les taux plasmatiques d’arsenic mesurés chez les individus exposés, répriment la capacité des DCs à sécréter différentes cytokines pro-inflammatoires jouant un rôle essentiel dans l’activation et la polarisation des lymphocytes T. En particulier, l’arsenic inhibe l’expression et la sécrétion de l’interleukine-12 par un mécanisme moléculaire impliquant le facteur de transcription Nrf2. Au total, ces travaux de thèse démontrent que l’arsenic inorganique possède des propriétés immunosuppressives sur la physiologie in vitro des DCs humaines. Cette immunotoxicité pourrait contribuer à la toxicité du métalloïde chez l’homme exposé par voie environnementale, et être prise en compte pour déterminer les effets de l’arsenic dans le traitement de certaines maladies inflammatoires chroniques
https://tel.archives-ouvertes.fr/tel-01135887

NNT : 2013REN1B013
tel-01135887
https://tel.archives-ouvertes.fr/tel-01135887
https://tel.archives-ouvertes.fr/tel-01135887/document
https://tel.archives-ouvertes.fr/tel-01135887/file/pdf2star-1392896105-Th--se-M--linda-Macoch2.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The hydraulic and electrical properties of pyroclastic rocks have been investigated in laboratory on a representative sampling of Montagne Pelée (Martinique, France) deposits with renewed interest in geophysical applications. This sampling covers all the lithologic units of this volcano: lava dome and lava flows, pumices from ash-and-pumice fall and flow deposits, lava blocks from block-and-ash flow and Peléean “nuées ardentes” deposits, scoriae from scoria flow deposits. The connected porosity varies over a wide range from 3 to 62%. The unconnected porosity is important only on pumices where it can reach 15%. The permeability covers more than 5 orders of magnitude, ranging from 10−16 to 35 × 10−12 m2. The higher values are obtained on lava blocks and the scoriae, even if these rocks are less porous than the pumices. The formation factor ranges from 7 to 1139. The transport properties of these rocks are slightly correlated with porosity. This indicates that these properties are not only controlled by the connected porosity. To connect the transport properties to the textural characteristics of the pore network of pyroclastic rocks, different models, based on geometrical considerations or percolation theory, were tested. The pore access radius distribution and the tortuosity control the transport properties of pyroclastic rocks. Consequently, the models (electric and hydraulic) based on the concept of percolation (e.g., the models of Katz and Thompson), apply better than the equivalent channel model of Kozeny-Carman. In addition, the difference in transport properties observed on lava blocks and pumices confirms that the mechanisms of degassing and vesiculation are different for these two types of rock.
ISSN: 2169-9313

hal-00310237
https://hal.archives-ouvertes.fr/hal-00310237
DOI : 10.1029/2006JB004385, 2007

Éditeur(s) : HAL CCSD
Résumé : National audience
Traditional network generation models attempt to replicate global structural properties (degree distribution, average distance, clustering coefficient, communities, etc.) through synthetic link formation mechanisms such as triadic closure or preferential attachment. In this work, we study the evolution of a very big communication network coming from mobile telephony and we analyse the link formation process. A first study conducted on the standard mechanisms allows observing that several mechanisms are responsible for the properties observed in this network. In a second study, we characterize more precisely the link formation process by searching for correlations between the probability of creating a new link and some individual properties such as the degree, the clustering coefficient and the age of the nodes.
Conférence sur les modèles et l'analyse des réseaux : Approches mathématiques et informatiques
Saint-Etienne, France

hal-00873990
https://hal.archives-ouvertes.fr/hal-00873990

Éditeur(s) : HAL CCSD
Résumé : International audience
The carbon capture and storage is considered as one of the solutions of reducing the effects of global warming. It consists in injecting large quantities of CO 2 in supercritical form directly into deeply located geological formations. One of the methods involves sequestration in the carbonate sedimentary rocks (sandstones and limestones) which are considered as a promising solution. The morphology of the pore network and solid skeleton defines important macroscopic prop-erties of the rock (permeability, stiffness). Modelling at micro scale of random heterogeneous materials (porous media) should be based on morphological and statistical characterisation 1,2 of the investigated microstructure. The work is focused on a reconstruction method by grains deposit 3 , for various range of pa-rameters, to obtain equivalent model of natural rock samples (oolitic limestone and fontainebleau sandstone). Generated samples satisfy morphological and statistical informations 4 which were obtained by 3D image analysis of X-ray tomography of the natural rock samples. For validation of the modelling numerical computations of mechanical and transfer properties are also provided.
14th European Mechanics of Materials Conference - EMMC14
Gothembourg, Sweden

hal-01103163
https://hal.archives-ouvertes.fr/hal-01103163

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
We investigate a class of granular materials characterized by the possibility of interlocking between the particles. The interlocking is modeled by its effect through rolling resistance depending on relative rotation and normal force at the contact points and involving a single parameter analogous to the sliding friction coefficient. The model, which is introduced in the framework of the contact dynamics, method, is applied to simulate the simple shear of a large granular sample. We present a detailed analysis regarding the influence of rolling and sliding friction parameters on the macroscopic response in terms of shear strength, fabric properties, and force transmission. Interestingly, two distinct regimes can be distinguished in which the steady-state shear strength is controlled by either rolling resistance or sliding friction. The relative contributions of rolling and sliding contacts to the shear strength are consistent with the same two regimes. Interlocking strongly affects the force network by enhancing the arching effect and thus increasing the relative importance of weak contact forces and torques, which is reflected in a decreasing power-law probability distribution of the contact forces and torques below the mean. Due to the combined effect of friction and interlocking, the force-carrying backbone takes an increasingly columnar aspect involving a low fraction of particles. Our data suggest that the nature of the weak contact network is strongly affected by the formation of these columns of particles which do not need to be propped laterally. In particular, in the limit of high rolling resistance and sliding friction, the role of the weak network of contacts is no longer to prop the force chains, but, like the strong contact network, to actively sustain the deviatoric load imposed on the system.
ISSN: 1539-3755

hal-00412020
https://hal.archives-ouvertes.fr/hal-00412020
DOI : 10.1103/PhysRevE.78.021301

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : The diamond anvil cell (DAC) is a fundamental device used to explore the properties of materials under extreme pressure and temperature (P/T) conditions. In the past years, simultaneous high P/T DAC experiments using the resistively heated DAC (RH-DAC) techniques have been developed for studying materials properties in a wide P/T range. However, the mechanical instability of metallic gaskets used for sample confinement at high P/T conditions remains a limiting factor for exploiting the accessible P/T range of the RH-DAC. In this study, we present a new gasket configuration that overcomes these limitations. It is based on an amorphous boron-epoxy mixture inserted in a rhenium gasket. We show how these gasket inserts stabilize the sample chamber over a wide P/T range, allowing monitoring sample properties using X-ray diffraction and absorption spectroscopy up to 50GPa and 1620K.
ISSN: 0895-7959

hal-01608425
https://hal.archives-ouvertes.fr/hal-01608425
DOI : 10.1080/08957959.2016.1245297
PRODINRA : 387347

Éditeur(s) : HAL CCSD Springer-Verlag Berlin Heidelberg
Résumé : International audience
Reaction wood produces very peculiar maturation stresses at the tree periphery i.e. compressive stress or very high tensile stress, for compression and tension wood respectively, as compared to moderately high tensile stress for normal wood. This means that both its mechanical state and its mechanical and physical properties differ from normal wood. Compression wood shows big differences from normal wood in conifers, for all physical and mechanical properties: higher density and axial crushing strength (MOR) but lower modulus of elasticity (MOE), far higher axial (longitudinal) shrinkage but lower radial and tangential shrinkage, sometimes even lower than the axial shrinkage. For tension wood things are less simple and can vary a lot from hardwood species to species. Globally there are no systematic differences in density and transverse shrinkage, MOE tends to be a little higher while MOR is slightly lower. However, axial shrinkage is much higher for tension wood with a gelatinous layer (G layer) than normal wood due to the specific gel like organization of cellulose microfibrils in the G layer. For tension wood without a G layer(which is rather frequent) axial shrinkage in the first drying operation is around two times higher than in normal wood mainly because of a kind of hygro-thermal release of locked in maturation stress. Overall the very high tensile stress and stored elastic energy in tension wood lead to problemsin wood processing (end splitting and board warping), which is far less the case for compression wood. But due to the large difference in properties relative to normal wood, compression wood occurrence is always a big problem for the in service behaviour of timber, which is seldom the case for tension wood.
The biology of reaction wood

ISBN : 978-3-642-10813-6
hal-01135273
https://hal.archives-ouvertes.fr/hal-01135273

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone.
ISSN: 0278-7407

hal-01172472
https://hal.archives-ouvertes.fr/hal-01172472
DOI : 10.1002/2014TC003756

Éditeur(s) : HAL CCSD National Institute of Environmental Health Sciences (NIEHS) National Institute of Environmental Health Sciences
Résumé : International audience
Long-term exposure to persistent pollutants with hormonal properties (endocrine-disrupting chemicals, EDCs) may contribute to the risk of prostate cancer (PCa). However, epidemiological evidence remains limited. We investigated the relationship between PCa and plasma concentrations of universally widespread pollutants, in particular p,p'-dichlorodiphenyl dichloroethene (DDE) and the non-dioxin like polychlorinated biphenyl congener 153 (PCB153). We evaluated before treatment 576 men with newly diagnosed PCa and 655 controls in Guadeloupe (French West Indies). Exposure was analyzed according to case-control status. Associations were assessed by unconditional logistic regression analysis, controlling for confounding factors. Missing data were handled by multiple imputation. We estimated a significant positive association between DDE and PCa (adjusted odds ratio [OR] 1.53; 95% CI 1.02, 2.30 for the highest versus lowest quintile of exposure; PTrend = 0.01). PCB153 was inversely associated with PCa (OR 0.30; 95% CI 0.19, 0.47 for the highest versus lowest quintile of exposure values; PTrend < 0.001). Also, PCB153 was more strongly associated to low-grade than high grade PCa. Associations of PCa with DDE and PCB153 were in opposite directions. This may reflect differences in the mechanisms of action of these EDCs, and although our findings need to be replicated in other populations, they are consistent with complex effects of EDCs on human health.
ISSN: 0091-6765

hal-01118553
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118553
DOI : 10.1289/ehp.1408407
PUBMED : 25493337

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Leg ulcer is a disabling complication in patients with sickle cell anemia (SCA) but the exact pathophysiological mechanisms are unknown. The aim of this study was to identify the hematological and hemorheological alterations associated with recurrent leg ulcers. Sixty-two SCA patients who never experienced leg ulcers (ULC-) and 13 SCA patients with a positive history of recurrent leg ulcers (ULC+) - but with no leg ulcers at the time of the study - were recruited. All patients were in steady state condition. Blood was sampled to perform hematological, biochemical (hemolytic markers) and hemorheological analyses (blood viscosity, red blood cell deformability and aggregation properties). The hematocrit-to-viscosity ratio (HVR), which reflects the red blood cell oxygen transport efficiency, was calculated for each subject. Patients from the ULC+ group were older than patients from the ULC- group. Anemia (red blood cell count, hematocrit and hemoglobin levels) was more pronounced in the ULC+ group. Lactate dehydrogenase level was higher in the ULC+ group than in the ULC- group. Neither blood viscosity, nor RBC aggregation properties differed between the two groups. HVR was lower and RBC deformability tended to be reduced in the ULC+ group. Our study confirmed increased hemolytic rate and anemia in SCA patients with leg ulcers recurrence. Furthermore, our data suggest that although systemic blood viscosity is not a major factor involved in the pathophysiology of this complication, decreased red blood cell oxygen transport efficiency (i.e., low hematocrit/viscosity ratio) may play a role.
ISSN: 1932-6203

inserm-00922105
http://www.hal.inserm.fr/inserm-00922105
http://www.hal.inserm.fr/inserm-00922105/document
http://www.hal.inserm.fr/inserm-00922105/file/2013_Connes_-_Decreased_Hematocrit.pdf
DOI : 10.1371/journal.pone.0079680

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Homogenization models are widely used to predict the evolution of texture (crystal preferred orientations) and resulting anisotropy of physical properties in metals, rocks, and ice. They fail, however, in predicting two main features of texture evolution in simple shear (the dominant deformation regime on Earth) for highly anisotropic crystals, like olivine: (1) the fast rotation of the CPO towards a stable position characterized by parallelism of the dominant slip system and the macroscopic shear and (2) the asymptotical evolution towards a constant intensity. To better predict CPO-induced anisotropy in the mantle, but limiting computational costs and use of poorly-constrained physical parameters, we modified a viscoplastic self-consistent code to simulate the effects of subgrain rotation recrystallization. To each crystal is associated a finite number of fragments (possible subgrains). Formation of a subgrain corresponds to introduction of a disorientation (relative to the parent) and resetting of the fragment strain and internal energy. The probability of formation of a subgrain is controlled by comparison between the local internal energy and the average value in the polycrystal. A two-level mechanical interaction scheme is applied for simulating the intracrystalline strain heterogeneity allowed by the formation of low-angle grain boundaries. Within a crystal, interactions between subgrains follow a constant stress scheme. The interactions between grains are simulated by a tangent viscoplastic self-consistent approach. This two-level approach better reproduces the evolution of olivine CPO in simple shear in experiments and nature. It also predicts a marked weakening at low shear strains, consistently with experimental data.
ISSN: 0012-821X

hal-01243503
https://hal.archives-ouvertes.fr/hal-01243503
DOI : 10.1016/j.epsl.2015.08.018

Éditeur(s) : HAL CCSD American Physiological Society
Résumé : Full text: http://jn.physiology.org/content/88/3/1475
International audience
The contribution of voltage-gated calcium channels (VGCC) to the development of cultured embryonic cockroach brain neurons was assessed using pharmacological agents. VGCC currents were recorded using the patch-clamp technique and were found to be blocked dose-dependently by micromolar concentrations of mibefradil. The activation and inactivation properties of the calcium channels enable a sizeable calcium current to flow at rest (about -30 and -20 mV in high-potassium culture media). As expected, the cytoplasmic-free calcium concentration was found to rise when the extracellular potassium concentration was raised from 3 to 15 and 30 mM. The effects of VGCC blockers and calcium chelators were different in fresh and in mature cultures in which the neurons were connected to each other to form a defined network. In fresh cultures, the two non-selective VGCC blockers (verapamil and mibefradil) induced a dose-dependent cell death that was proportional to their blocking effect on I(Ba). This effect could not be prevented by addition of fetal calf serum to the culture medium. A similar effect was obtained using intra- or extracellular calcium chelating agents (10 microM BAPTA-AM or 10 mM EGTA). Quite unexpectedly, blockade of the P/Q-like (omega-Aga WA-sensitive) component of the calcium current by 500 nM of omega-AgaTx IVA had no lethal effect, suggesting that the corresponding channels are not involved in the survival mechanism. As expected from their lack of effect on I(Ba), isradipine, nifedipine, and omega-CgTx GVIA did not induce cell death. When the neurons started growing neurites, their sensitivity to calcium channel blockade by mibefradil decreased, indicating a correlation between neurite outgrowth and resistance to calcium depletion. In mature cultures, the neurons became resistant to mibefradil, verapamil, and BAPTA-AM. However, these agents, as well as omega-AgaTx IVA, had a significant inhibitory effect on the increase in diameter of the connectives that linked adjacent clusters of neurons. This effect has been shown to result, in the case of mibefradil, from an inhibition of neurite outgrowth characterized by a significant reduction of the number of primary neurites and secondary branchings but not to a significant modification of the diameter of individual neurites. These results support the view that, as in vertebrates, calcium influx through VGCC plays an important role in survival and neurite outgrowth of cultured embryonic insect neurons. The differential contribution of the P/Q-like and R-like (omega-Aga WA-sensitive) calcium channels in these processes is discussed.
ISSN: 0022-3077

hal-00982287
https://hal.archives-ouvertes.fr/hal-00982287
DOI : 10.1152/jn.00749.2001
PUBMED : 12205168

Éditeur(s) : ISTPM
Résumé : Table of Contents The Natural Environment Production centres Oyster farming centres Mussel farming centres Chapter I. - The Physicochemical Environment I. Sea Water a) Transparency, turbidity b) Temperature c) Salinity d) Dissolved gases e) Substances dissolved in the water f) Water movements g) Hydrology of the main shellfish farming centres II. Soils a) Soil properties b) Mechanical amendment of soils, its effects c) Fertilisation of soils in shellfish farming d) Changes in soils due to farming Bibliography Chapter II. - The Natural Environment Phytoplankton Zooplankton Basic biology of phytoplankton Assessment of phytoplankton production, notion of primary productivity Phytoplankton from a few shellfish farming regions Microphytobenthos Factors controlling primary productivity Toxicity of planktonic organisms; red tides Bibliography Chapter III – Alterations in the Natural Environment Pollution I. Chemical Pollution Definitions Influence of turbidity A. Telluric pollution 1o Domestic pollution 2o Agriculture-related pollution 3o Industrial pollution B. Pelagic pollution 1o Pollution through hydrocarbons Conclusion II. Bacterial Pollution Future of micro-organisms in the sea A. Specimen conditions B. Phenomena of dispersion Survival of germs in the marine environment A. Factors influencing the total microbial content B. Resistance of various groups of germs Consequences of bacterial pollutions on shellfish and shellfish farming Shellfish Shellfish farming Conclusion Bibliography
Sommaire : Le milieu naturel Les centres de production Les centres ostréicoles Les centres mytilicoles Chapitre I. - le milieu physico-chimique I. L'eau de mer a) Transparence, turbidité b) Température c) Salinité d ) Les gaz dissous e) Les substances dissoutes dans l'eau f) Les mouvements de l'eau g) Hydrologie des principaux centres conchylicoles IL Les sols a ) Propriétés des sols b) Amendement mécanique des sols, ses effets c) La fertilisation des sols en conchylicutture d) Evolution des sols du fait de la culture Bibliographie Chapitre II. - le milieu biologique Le phytoplancton Le zooplancton Biologie sommaire du phytoplancton Evaluation de la production de phytoplancton, notion de productivité primaire Phytoplancton de quelques régions conchylicoles Le microphytobenthos Facteurs contrôlant la productivité primaire Toxicité d'organismes planctoniques ; les eaux rouges bibliographie Chapitre III - les altérations du milieu naturel. Les pollutions I. Les pollutions chimiques Définitions Influence de la turbidité A. Pollution tellurique 1° Pollution d'origine domestique 2° Pollutions liées aux activités agricoles 3° Pollutions industrielles B. Pollution pélagique 1° Pollution par les hydrocarbures Conclusion II. Les pollutions bactériennes Devenir des microorganismes dans la mer A. Conditions de prélèvements B. Phénomènes de dispersion Survie des germes dans le milieu marin A. Facteurs influant sur la teneur microbienne globale B. Résistance des divers groupes de germes Conséquences des pollutions bactériennes sur les coquillages et sur la conchyliculture Les coquillages La conchyliculture Conclusion Bibliographie
Revue des Travaux de l'Institut des Pêches Maritimes (0035-2276) (ISTPM), 1974-09 , Vol. 38 , N. 3 , P. 217-337

Droits : Ifremer
http://archimer.ifremer.fr/doc/1974/publication-1776.pdf
http://archimer.ifremer.fr/doc/00000/1776/

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The properties of the subduction interplate domain are likely to affect not only the seismogenic potential of the subduction area but also the overall subduction process, as it influences its viability. Numerical simulations are performed to model the long-term equilibrium state of the subduction interplate when the diving lithosphere interacts with both the overriding plate and the surrounding convective mantle. The thermomechanical model combines a non-Newtonian viscous rheology and a pseudo-brittle rheology. Rock strength here depends on depth, temperature and stress, for both oceanic crust and mantle rocks. I study the evolution through time of, on one hand, the brittle-ductile transition (BDT) depth, zBDT, and, on the other hand, of the kinematic decoupling depth, zdec, simulated along the subduction interplate. The results show that both a high friction and a low ductile strength at the asthenospheric wedge tip shallow zBDT. The influence of the weak material activation energy is of second order but not negligible. zBDT becomes dependent on the ductile strength increase with depth (activation volume) if the BDT occurs at the interplate decoupling depth. Regarding the interplate decoupling depth, it is shallowed (1) significantly if mantle viscosity at asthenospheric wedge tip is low, (2) if the difference in mantle and interplate activation energy is weak, and (3) if the activation volume is increased. Very low friction coefficients and/or low asthenospheric viscosities promote zBDT = zdec. I then present how the subducting lithosphere age affects the brittle-ductile transition depth and the kinematic decoupling depth in this model. Simulations show that a rheological model in which the respective activation energies of mantle and interplate material are too close hinders the mechanical decoupling at the down-dip extent of the interplate, and eventually jams the subduction process during incipient subduction of a young (20-Myr-old) and soft lithosphere under a thick upper plate. Finally, both the BDT depth and the decoupling depth are a function of the subducting plate age, but are not influenced in the same fashion: cool and old subducting plates deepen the BDT but shallow the interplate decoupling depth. Even if BDT and kinematic decoupling are intrinsically related to different mechanisms of deformation, this work shows that they are able to interact closely. Comparison between modelling results and observations suggests a minimum friction coefficient of 0.045 for the interplate plane, even 0.069 in some cases, to model realistic BDT depths. The modelled zdec is a bit deeper than suggested by geophysical observations. Eventually, the better way to improve the adjustment to observations may rely on a moderate to strong asthenosphere viscosity reduction in the metasomatised mantle wedge.
ISSN: 1869-9510

hal-00795559
https://hal.archives-ouvertes.fr/hal-00795559
DOI : 10.5194/se-3-467-2012, 2012

Éditeur(s) : HAL CCSD ACM
Résumé : International audience
In this study, we use an adapted version of Pitsburgh-like learning classifier system to perform over classification tasks. The Adapted Pittsburgh Classifier System, enhanced with a new mechanism, allows us to consider the classification problems and their treatment by a given LCS in a different manner. Our aim is to exhibit elements in order to prove that, using the action covering mechanism, this system is able to build an inner map of a given classification learning sample. In the context of this paper, this map is built using an intrisic property of Pittsburgh-like CS: the use of various collections of classifiers amongst a unique population.
Proceedings of the 12th annual conference comp on Genetic and evolutionary computation
Portland,Oregon, United States

hal-00520609
https://hal.archives-ouvertes.fr/hal-00520609
DOI : 10.1145/1830761.1830823

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Numerical programs for simulating flow and reactive transport in porous media is essential for predicting reservoir properties related to CO2 sequestration performance, subsurface storage and risk assessment. In this paper we solve the Navier Stokes' equation using finite difference method, on a simulated porous rock structure, to study the velocity distribution of fluid flowing through it under a constant pressure gradient. A reactive solute carried through the fluid is allowed to interact with the minerals in the rock. This chemical reaction dissolves the mineral which changes the rock structure thus affecting its flow properties. These changes of flow properties are studied with variation in reactive solute concentration and pressure field. The different mechanisms of dissolution responsible for the variation of flow properties for the different parameters is predicted. Before the onset of homogeneous dissolution, variation in porosity follows a power-law behaviour with change in permeability when the latter is scaled by the concentration of the reactive species. The simulation results are compared with available experimental data and found to give a reasonable match.
ISSN: 0022-1694

hal-00757760
https://hal.archives-ouvertes.fr/hal-00757760
DOI : 10.1016/j.jhydrol.2012.05.024

Éditeur(s) : HAL CCSD
Résumé : International audience
Some morphological and biochemical taxonomic markers are also affecting factors of dynamic mechanical properties of wood. Thus, could these properties reflect the classification/phylogeny of taxa? This work is a first insight into this question. It relied on the gathering (through experimental campaigns and exhaustive literature review) of a large database on the viscoelastic (i.e. including damping) vibrational properties of 445 woody species. relationship between damping was confirmed at a wide interspecific scale, but described no more than 40% of not in a way that could be easily related to the phylogenetic tree. Damping was a bit more -Papilionoideae and, to a lesser extent, Lauraceae, Cupressaceae and Moraceae) damping than average, independently While for some other families no clear characteristics could be observed at least with the present number of represented species. In the future, increasing the amount of data and compiling anatomical and chemical markers / affecting factors will allow further analysis at sub-family levels, and a better understanding of this wide topic.
6th Plant Biomechanics Conference PBM09
Cayenne, French Guiana

hal-00808398
https://hal.archives-ouvertes.fr/hal-00808398
https://hal.archives-ouvertes.fr/hal-00808398/document
https://hal.archives-ouvertes.fr/hal-00808398/file/Mechanical_damping_wood_Bremaud_al.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Few studies have investigated the influence of environmental conditions on the within-treevariation in Eucalyptus wood traits. The genotype and environment effects and their interactionsinfluence the wood properties. Their evaluations are crucial to estimate the genotype values andto select with efficiency. Thus, the aim of this study was to better understand the effect ofground slope and wind speed on the spatial variation of basic density (ρ), stiffness (MOE) andmicrofibril angle (MFA) of Eucalyptus wood. Wood discs cut along the trunk were sampledfrom 150 six-year-old Eucalyptus grandis x E. urophylla hybrids growing in 3 contrastinggrowing conditions influenced by ground slope and wind regime. Near Infrared (NIR)calibrations previously developed for ρ, MOE and MFA were used to predict in our discs. 2-Dplots presenting the spatial variation of predicted wood traits were compared. The higher theground slope, the greater the magnitude of radial variation in ρ, principally in the medium zoneof the trunk. The spatial variation of wood stiffness seems to be sensitive to two environmentalconditions. The MFA radial decreases were more pronounced where the wind speed was higher.At the base and top of the trees, however, there was no significant effect of growing conditionson the radial variation of the wood properties considered here.
ISSN: 0931-1890

hal-01451896
https://hal.archives-ouvertes.fr/hal-01451896
https://hal.archives-ouvertes.fr/hal-01451896/document
https://hal.archives-ouvertes.fr/hal-01451896/file/Art_Gril_al_Spatial_variation_wood_density_2016.pdf
DOI : 10.1007/s00468-015-1327-8

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction infancy corresponds to the first few million years following subduction initiation, when slabs start their descent into the mantle. It coincides with the transient (yet systematic) transfer of material from the top of the slab to the upper plate, as witnessed by metamorphic soles welded beneath obducted ophiolites. Combining structure–lithology–pressure–temperature–time data from metamorphic soles with flow laws derived from experimental rock mechanics, this study highlights two main successive rheological switches across the subduction interface (mantle wedge vs. basalts, then mantle wedge vs. sediments; at ∼800 °C and ∼600 °C, respectively), during which interplate mechanical coupling is maximized by the existence of transiently similar rheologies across the plate contact. We propose that these rheological switches hinder slab penetration and are responsible for slicing the top of the slab and welding crustal pieces (high- then low-temperature metamorphic soles) to the base of the mantle wedge during subduction infancy. This mechanism has implications for the rheological properties of the crust and mantle (and for transient episodes of accretion/exhumation of HP-LT rocks in mature subduction systems) and highlights the role of fluids in enabling subduction to overcome the early resistance to slab penetration.
ISSN: 0012-821X

hal-01383368
http://hal.upmc.fr/hal-01383368
http://hal.upmc.fr/hal-01383368/document
http://hal.upmc.fr/hal-01383368/file/Agard_2016_Plate_interface.pdf
DOI : 10.1016/j.epsl.2016.06.054