Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cnidarian–dinoflagellate photosynthetic symbioses are fundamental to biologically diverse and productive coral reef ecosystems. The hallmark of this symbiotic relationship is the ability of dinoflagellate symbionts to supply their cnidarian host with a wide range of nutrients. Many aspects of this association nevertheless remain poorly characterized, including the exact identity of the transferred metabolic compounds, the mechanisms that control their exchange across the host–symbiont interface, and the precise subcellular fate of the translocated materials in cnidarian tissues. This lack of knowledge is mainly attributed to difficulties in investigating such metabolic interactions both in situ, i.e. on intact symbiotic associations, and at high spatial resolution. To address these issues, we illustrate the application of two in situ and high spatial resolution molecular and ion imaging techniques–matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI) and the nano-scale secondary-ion mass spectrometry (NanoSIMS) ion microprobe. These imaging techniques provide important new opportunities for the detailed investigation of many aspects of cnidarian–dinoflagellate associations, including the dynamics of cellular interactions.
ISSN: 0944-2006

hal-01546914
http://hal.upmc.fr/hal-01546914
DOI : 10.1016/j.zool.2014.06.006

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
S U M M A R Y Over the last decade, thermomechanical models have revealed the control of both tectonics and erosion on the morphology of continental plateaus margins. However, unravelling the specific effects of these two coupled processes has been difficult in practice. Here, to assess the control of erosion, we investigate the dynamics of the eastern and the northern borders of the Tibetan Plateau, which are characterized by a low convergence rate and a steep topographic escarpment adjacent to the Sichuan and Tarim basins, respectively. Thermomechanical modelling of continental lithosphere coupled with fluvial denudation reveals that important crustal deformation with large-scale horizontal displacements can occur, without any convergence, as a response to mass transfer due to gravitational collapse and to erosional unloading. These processes are sensitive to crustal structure, geothermal gradient as well as surface erosion. At a timescale of several million years, our results suggest that this denudation-triggered deformation exerts a primary control on the evolution of those plateau margins by counterbalancing the mass removal due to erosion and stabilizing the topographic escarpment. This finding supports a possible explanation for the morphology of the Longmen Shan, eastern Tibet, in which the paradoxical combination of persistent high-topographic gradients close to the foreland and low convergence rates can be related to the influence of erosion on deformation patterns.
ISSN: 0956-540X

hal-01577060
https://hal-amu.archives-ouvertes.fr/hal-01577060
https://hal-amu.archives-ouvertes.fr/hal-01577060/document
https://hal-amu.archives-ouvertes.fr/hal-01577060/file/godard2009erosional.pdf
DOI : 10.1111/j.1365-246X.2009.04324.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene-lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 degrees C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of similar to 208 degrees C and a burial depth of similar to 5.7 km. The second stage corresponds to a fault reactivation at a temperature of similar to 240 degrees C and a burial depth of similar to 6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene-early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.
ISSN: 0191-8141

hal-00644828
https://hal.archives-ouvertes.fr/hal-00644828
DOI : 10.1016/j.jsg.2011.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
After Jurassic rifting, numerous carbonate platforms (i.e., the Orizaba, Cordoba and Golden Lane-Tuxpan platforms) developed during the Lower and Middle Cretaceous episode of thermal subsidence along the western passive margin of the Gulf of Mexico, with intervening basinal domains (i.e., the Tampico-Misantla, Zongolica, Veracruz and Deep Gulf of Mexico - DGM - basins).;During the Late Cretaceous-Paleocene, the east-verging Sierra Madre Oriental thrust belt developed, resulting in tectonic uplift and unroofing of the allochthonous units (i.e. tectonic units made up of former Orizaba and Cordoba platforms and Zongolica Basin series). This new topography provided also an important source of clastics to feed the adjacent foredeep, where coeval tectonic loading accounted for the bending of the foreland lithosphere. However, shallow water facies or even emersion persisted until the Eocene in the forebulge area (at the present location of the Golden Lane), preventing locally the clastics to reach the DGM. This topographic barrier was ultimately bypassed by the clastics only during the Oligocene and Neogene, once (1) the prograding clastic wedge had exceeded accommodation, and (2) the long lasting thermal subsidence of the passive margin could overpass the effect of the bending and force the former bulge to sink.;Numerous paleo-thermo-meters (Tmax, Ro), paleo-thermo-barometers (fluid inclusions), PVT and coupled forward kinematic and thermal modeling have been used to calibrate and date the progressive unroofing of the thrust belt. Coupled tectonic and sedimentologic modeling was applied in the foreland to predict the distribution of sand versus shale ratios in the Oligocene to Plio-Quaternary clastic sedimentary wedge of the passive margin, where gravitational gliding of post-Eocene series occurred during the Neogene along major listric faults.;Mantle dynamics are advocated as the main process accounting for post-orogenic uplift and regional tilting of the basement, which initiated a massive transfer of sediments from the Cordillera towards the Gulf of Mexico, from Oligocene onward, resulting in a destabilization and gravitational collapse of the western slope of the Gulf of Mexico in Neogene times.
ISSN: 0040-1951

hal-00445248
https://hal.archives-ouvertes.fr/hal-00445248
DOI : 10.1016/j.tecto.2009.04.012

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD Elsevier
Résumé : In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.
ISSN: 0191-8141

hal-01355954
https://hal.archives-ouvertes.fr/hal-01355954
DOI : 10.1016/j.jsg.2016.02.015

Éditeur(s) : HAL CCSD
Résumé : Evolution of organisms, genomes and genes does not strictly follow a tree-like process; symbiosis, horizontal gene transfers and gene fusions build high level composite objects with components of phylogenetically distinct origins. Such processes have been called introgressive events and are significant in evolution. They are involved in some major evolutionary transitions such as eukaryogenesis, photosynthesis acquisition in eukaryotes and the origins of major archaeal clades. Eukaryogenesis would have involved (at least) two kinds of partners: an archaeon and an alpha-proteobacterium. Photosynthetic eukaryotes arose from the integration of a cyanobacterium into a eukaryotic cell and recent findings suggested that most archaeal lineages emerged after massive acquisitions of bacterial genes. These composite lineages carry highly chimeric genomes where genes from symbiotic partners co-localize into the same genome. During my PhD thesis, I used sequence similarity networks and phylogenetic methods in order to study reticulate evolution. My research specifically focused on a previously hidden component of composite genomes: symbiogenetic genes (S genes). These chimeric genes are found in genetic mergers, and originate from the association of genes of symbiotic partners. Some association rules have been discovered. In a broad perspective, the discovery of S-genes extends the concept of genome chimerism to the within-gene level.
L'évolution des organismes, des génomes et des gènes n'est pas strictement arborescente; les symbioses, les transferts horizontaux de gènes ou encore la fusion de gènes créent des objets composites formés de parties dont les histoires évolutives sont différentes. Ces processus non arborescents sont appelés introgressifs et ont un impact non négligeable en évolution. Ils sont à l'origine de transitions évolutives majeures comme l'émergence des eucaryotes, des eucaryotes photosynthétiques ou encore de nombreux groupes d'Archaea. Dans le cas des eucaryotes, l'association et la stabilisation d'une Archaea et d'une alpha-protéobactérie a permis l'émergence d'un nouveau groupe d'organismes composites aux propriétés émergentes. L'acquisition de la photosynthèse chez les eucaryotes s'est faite via l'endosymbiose d'une cyanobactérie et, bien que débattue, l'apparition des grands groupes d'Archaea semble être concomitante avec l'acquisition de nombreux gènes d'origine bactérienne. Ces superorganismes ont la particularité d'avoir des génomes composés de gènes de différents partenaires symbiotiques. L'objectif de mon travail de thèse a constitué à étudier l'aspect introgressif de l'évolution par des méthodes de réseaux de similarité de séquence et des méthodes phylogénétiques. Je me suis particulièrement focalisé sur la détection de nouveaux gènes chimériques nommés gènes symbiogénétiques (S-gènes) car composés de parties originaires des différents partenaires symbiotiques. De tels gènes existent dans les génomes et plusieurs règles d'association ont pu être mises en évidence. Plus généralement, la présence de S-gènes étend la notion de mosaïcisme génomique au niveau infra-génique.
https://tel.archives-ouvertes.fr/tel-01536344

NNT : 2016PA066534
tel-01536344
https://tel.archives-ouvertes.fr/tel-01536344
https://tel.archives-ouvertes.fr/tel-01536344/document
https://tel.archives-ouvertes.fr/tel-01536344/file/2016PA066534.pdf

Éditeur(s) : Styli 2003. Trente ans de crevetticulture en Nouvelle-Calédonie. Nouméa - Koné, 2-6 juin 2003. 2004. Gorarant C, Harache Y, Herbland A, Mugnier C. Ed. Ifremer, Actes de Colloque, n°38, pp.113-120
Résumé : Two oyster species are currently present along the French coasts : the indigenous European flat oyster (Ostrea edulis), and the Pacific cupped oyster (Crassostrea gigas), that has been introduced from Japan since the beginning of the 70ies. The flat oyster successively suffered from two protozoan diseases during the 60ies and its production decreased from 20 000 tons/year by that time to 1 500 tons/year nowadays. Consequently, the oyster production is principally (99%) based upon the Pacific oyster species with approximately 150 000 tons/year among which 90% are grown from the natural spat. However, the hatchery production of this species is developing and was estimated to 400 to 800 millions spat in 2002. Moreover, strengthened relationships between IFREMER and the 5 commercial hatcheries, that all joined the SYSAAF (Union of the French poultry, shellfish and fish farming selectors), allow to plan for new genetic breeding programs. At the end of the 80ies, IFREMER initiated a genetic breeding program for the resistance of the European flat oyster to the bonamiosis, and obtained strains more tolerant to this disease. After two generations of massal selection, molecular markers had identified a reduced genetic basis in this program. It was then reoriented to an intra-familial selection. However, we were confronted to a zootechnic problem to manage such a scheme and we compromised by an intra-cohorts of families selection scheme managed using molecular markers. The program has now reached the transfer level with experimentation at a professional scale. Concerning the Pacific cupped oyster, and in parallel with the obtaining and the study of polyploids, performance of different Asian cupped oyster strains were compared to the one introduced in France thirty years ago and currently suffering from summer mortalities. The local strain exhibited better performance, certainly based upon a good local adaptation. In other respects, although early growth is a relevant criteria for selection for growth to commercial stage, it is not to be privileged in the context of an oyster producing region with a limited food availability. Contrary, the spat summer mortality became a priority for numerous teams (genetic, physiology, pathology, ecology,...) joined in the MOREST program. The first results showed important survival differences between fullsib and halsib families. They indicate a genetic determinism to this character "survival" and promote for its selection.
Deux espèces d'huîtres sont aujourd'hui présentes sur les côtes françaises : l'huître plate européenne (Ostrea edulis), indigène, et l'huître creuse du Pacifique (Crassostrea gigas), introduite du Japon dans le début des années 1970. L'huître plate a subi coup sur coup, dans les années 1960, deux maladies dues à des protozoaires parasites et sa production est ainsi passée de 20 000 t/an dans les années 1960 à 1500 t/an aujourd'hui en France. Il en résulte que la filière ostréicole française repose quasiment exclusivement (99%) sur la production de l'huître creuse, C. gigas, avec 150 000 tonnes en 2000 dont environ 90% est issu du captage naturel. Cependant, la reproduction de cette espèce en écloserie est actuellement en expansion avec une estimation de 400 à 800 millions de naissains commercialisés en 2002. Des rapports renforcés entre l'IFREMER et les cinq écloseries françaises de la filière ostréicole, qui adhèrent toutes au SYSAAF (SYndicat des Sélectionneurs Avicoles et Aquacoles Français), permettent désormais d'envisager le développement de nouveaux programmes d'amélioration génétique. A la fin des années 1980, un programme de sélection pour la résistance de l'huître plate à la bonamiose a été initié au sein de l'IFREMER, et a permis d'obtenir des souches plus tolérantes à cette maladie. Après deux générations en sélection massale, les marqueurs moléculaires avaient mis en évidence une base génétique réduite au sein de ce programme qui s'était alors orienté vers une sélection intra-familiale. Devant la lourdeur zootechnique d'un tel schéma, un compromis a été trouvé en réalisant une sélection au sein de cohortes de familles biparentales, la gestion de ces cohortes étant permise par les analyses moléculaires. Le programme est maintenant dans sa phase de transfert, avec des expérimentations à plus grande échelle en partenariat avec la profession. En ce qui concerne l'huître creuse, et en parallèle de l'obtention et l'étude de polyploïdes, les performances de différentes souches d'huîtres creuses provenant d'Asie ont été comparées à celles de la souche introduite en France il y a trente ans, sujette à des mortalités estivales. La souche locale présente de meilleures performances, vraisemblablement grâce à une adaptation bien réalisée. Par ailleurs, bien que l'amélioration de la croissance jusqu'à la taille commerciale s'avère possible par une sélection précoce au stade larvaire, le critère de croissance n'est pas nécessairement à privilégier dans le contexte d'un bassin ostréicole disposant de ressources trophiques limitées. En revanche, les importantes mortalités rencontrées par le naissain en périodes estivales constituent le sujet d'étude prioritaire sur lequel se sont penchées de nombreuses équipes (génétique, physiologie, pathologie, écologie, ...) dans le cadre du grand défi MOREST. Les premiers résultats ont mis en évidence de fortes différences de survie entre des familles biparentales d'animaux indiquant un déterminisme génétique du caractère « survie », et encourageant dans la voie d'une sélection pour ce caractère.

Droits : 2004 Ifremer
http://archimer.ifremer.fr/doc/2003/acte-3491.pdf
http://archimer.ifremer.fr/doc/00000/3491/

Éditeur(s) : HAL CCSD
Résumé : International audience
Island barriers are common features along the world coastlines. They have a crucial role in protecting inland and rich lagoonal ecosystems. Erosion and sand transfers on these island barriers during extreme events such as tropical storms or typhoons remain poorly investigated. This work focuses on a multi-scales nalysis (season to decade) of the morphodynamics of Wan-Tzu-Liao sand barrier subjected to extreme waves and sea surges. We combine topographic measurements of the emerged beach at seasonal scale between 2011 to 2012 and long-term (1993-2009) shoreline changes using aerial photographs and satellite images. At the seasonal scale, during Monsoon, the sand was taken from the beach-front and transported seaward outside the study area. During typhoons season, 12 typhoons drove a beach recovery process resulting in a seaward shoreline shift. This annual behavior is discussed in term of roll-over process of the barrier. At the decadal scale, the shoreline changes evidence cross-shore processes in the north part of the barrier and longshore processes in the south. Although the chronic landward migration displays several stages, the strong losses of the barrier area occurs only since 2004 and call into question the general concept of conservation of mass during the roll-over of a barrier.
Revue Paralia, XIIIème Journées Nationales Génie CIvil Génie Côtier
Dunkerque, France

hal-01018203
https://hal.archives-ouvertes.fr/hal-01018203

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report new structural, microstructural, petrological, and major- and trace-element data on ultramafic rocks from the Kondyor zoned ultramafic complex in Far-East Russia. The ultramafic rocks are subdivided into three subconcentric lithologies, from core to rim: (1) a metasomatic domain where generally phlogopite-rich dykes pervasively intrude dunite; (2) a main dunite core; (3) a pyroxenite rim. The ultramafic rocks have nearly vertical contacts with the surrounding Archaean basement (gneisses, quartzites and marbles) and hornfelsed Riphean sediments. The hornfelsed sediments show a relatively steep ( 60), outward dipping layering, which rapidly flattens to horizontal away from the inner contact. Although the Riphean sediments define a dome-like structure, the inward, shallow dipping foliation of the dunites indicates a synformal structure. Detailed petro-structural investigations indicate that the Kondyor dunites were deformed by solid-state flow under asthenospheric mantle conditions. The outward textural change from coarse- to fine-grained equigranular dunite and the outward-increasing abundance of subgrains and recrystallized olivine grains suggest dynamic recrystallization while fluid circulation was channelized within the core metasomatic zone, with a decreasing melt fraction from core to rim, and also suggest that solid-state deformation induced grain-size reduction towards the cooling border of the Kondyor massif. Based on their geochemistry, the dunites are interpreted as mantle rocks strongly affected by reaction with melts similar to the JurassicCretaceous Aldan Shield lamproites. Rim pyroxenites were formed by a melt-consuming peritectic reaction, implying the existence of at least a small, conductive thermal gradient around the dunite body while the latter was still at near-solidus temperature conditions. This suggests that the zoned structure of Kondyor was initiated at mantle depths, most probably within the subcontinental lithosphere. Upon cooling, the lamproitic melts were progressively focused in the central part of the massif and drained into vein conduits where they reacted with the wall-rock dunite. Two-dimensional numerical modelling based on finite-differences with a marker-in-cell technique incorporates temperature-dependent rheologies for both molten and non-molten host rocks. The modelling consolidates the structural, petrological and geochemical interpretations, which show that the dunites represent the synformal, flat-lying apex of an asthenospheric mantle diapir, triggered by fluid pressure channelized in the core, which nearly reached the Earths surface. We conclude that translithospheric mantle diapirism is an important mode of mass transfer in the Earth.
ISSN: 0022-3530

hal-00424508
https://hal.archives-ouvertes.fr/hal-00424508
DOI : 10.1093/petrology/egn083

Éditeur(s) : Elsevier Science Bv
Résumé : The timing, routing and processes of sediment transfer from the continents to the oceans at millennial time-scale are still largely unknown. The potential of turbidite systems (dominantly deposited during sea-level lowstands) to record global or regional environmental fluctuations is usually under-exploited because of the difficulty to obtain robust chronostratigraphic constraints in turbiditic deposits, and therefore to tie changes in sedimentary processes to environmental fluctuations. We were able to obtain a millennial-scale chronostratigraphy based on oxygen isotopes of the scarce foraminifera preserved in turbiditic deposits of the Rhone Turbidite System within the Western Mediterranean. Our results show that 1) objective criteria can be defined for the selection of foraminifera preserved within the pelagic intervals between the turbiditic sequences, in order to obtain a reliable isotope stratigraphy; 2) Turbidites triggered by hyperpycnal currents are described for the first time within the Rhone Turbidite System. They are related to the periods of direct fluvial connection with the canyon head (during the sea-level lowstand and early rise), and to a period of high sediment flux in relation with the massive recession of the Rhone glaciers in the Alps; 3) The lithofacies change passing from hyperpycnal to “Bouma-type” is dated at ca 19 cal. ka BP, which might correspond to an acceleration of sea-level rise (19-ka Meltwater Pulse,).
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2015-06 , Vol. 323 , P. 148-166

Droits : 2015 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00266/37712/35730.pdf
DOI:10.1016/j.sedgeo.2015.04.009
http://archimer.ifremer.fr/doc/00266/37712/

Éditeur(s) : World Aquaculture Society, Aquaculture 2006
Résumé : Oysters are among the most familiar of all marine invertebrate taxa. However our knowledge of oyster phylogeny and systematics is fragmentary. This is principally due to the plastic growth patterns of these animals, which result in a wide range of overlapping, ecophenotypic variants that greatly reduce the value of analysis based on shell morphology. Besides that, many intentional or accidental anthropogenic transfers have emphasised this situation. In several cases of misclassification or misidentification of oysters, DNA molecular data, have provided valuable new insights on the tracing of introductions or more generally on the phylogeographic relationships between oyster species. We will illustrate this issue with recent case studies from our lab on several flat and cupped oysters: (1) the Crassostrea gigas – Crassostrea angulata couple of Asian species and their successive introductions in Europe, (2) the new species of cupped oysters, Crassostrea honkongensis, described in Hong-Kong and very divergent from the species Crassostrea gigas it was initially supposed to be, (3) the mangrove oyster Crassostrea gasar that was shown not only to be present along the coasts of Western Africa but also along the Atlantic coasts of South America, and (4) the geographic disjunction between Ostreola stentina, described in the Mediterranean Sea, and the genetically closely related species Ostrea aupouria (from New Zealand) and Ostreola equestris (from Mexico Gulf/Atlantic). At the intra specific level, we will focus on one of the main documented case in Europe, the flat oyster, Ostrea edulis. It is a marine bivalve whose natural geographical distribution ranges along the European Atlantic coast from Norway to Morocco, in addition to the Mediterranean and Black Sea. Studies of allozymes, microsatellites and mitochondrial differentiation over the whole range concluded that a significant divergence existed between Mediterranean and Atlantic populations, together with an isolation-by-distance pattern. However, the average mitochondrial haplotypic diversity displayed a high among populations variance, reflecting smaller effective population size in some locations. Additionally, a ten-fold quantitative difference was observed in the same study in Fst between the mitochondrial and the nuclear genomes, which could be due to sex biased differential reproductive success between males and females. In order to further document this hypothesis, two experiments at the population level were conducted. First, brooding females were sampled in a wild population and the number of males fertilizing a given female estimated. Then, parentage analyses were achieved under experimental conditions: successive mass spawnings were collected from a population of potential genitors kept in hatchery, whose genotypes were known, in order to infer a posteriori the relative contribution of each genitor. Moreover, we aimed to better understand the reproduction dynamics of this species. Several patterns of spawning could be distinguished: unique, successive or extended in time. The different parental contributions and reproductive behaviors observed in these experiments are discussed in the context of the hypothesis of a variance in the reproductive success of males and females and consequences in local and temporal reduced effective population sizes.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/acte-3475.pdf
http://archimer.ifremer.fr/doc/00000/3475/

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Although lawsonite-bearing rocks are rare in exhumed high-pressure (HP) terranes, they are considered to exert a primary role in subduction dynamics. Recent observations in natural settings have shown that fluid–rock interaction at HP conditions, including metasomatism, may lead to unusually high lawsonite amounts even in rocks that originally contained little or no lawsonite. This process may therefore bear important implications for element recycling in subduction zones. A detailed characterization of the geochemical fingerprints associated with lawsonite metasomatism is presented in this contribution. The studied rocks belong to the HP terranes of Alpine Corsica (France), which is the largest documented exposure for lawsonite metasomatism. Metasomatic lawsonite displays complex compositional zoning, including high trace element, Cr and Ti content. The trace element content is much higher compared with the average of non-metasomatic lawsonite, and is in line with the re-incorporation of large amounts of trace elements (e.g. REE, Sr, Pb, Th) in the rock during metasomatism, as shown by mass transfer calculations. Our data suggest that serpentinites represented the main fluid source for the metasomatism, with concurrent contribution of other, possibly Ca-rich lithologies, such as mafic or meta-sedimentary rocks. We propose that the breakdown of metasomatic lawsonite may contribute to the genesis of magmas and their characteristic geochemical signatures.
ISSN: 0263-4929

hal-01107395
https://hal.archives-ouvertes.fr/hal-01107395
DOI : 10.1111/jmg.12074

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report microstructural evidence for fluid-assisted ductile strain localization in a ≤ 50 m-wide mylonitic–ultramylonitic shear zone in the Ronda Peridotite massif, Southern Spain. Strain localization occurred at relatively low pressure (< 0.8 GPa) and moderate temperature (750–1000 °C). Initial deformation by dislocation creep resulted in formation of mylonites. Focusing of aqueous fluids in the shear zone favored the activation of dissolution–precipitation creep, resulting in further strain localization. This process is recorded by two generations of ultramylonitic bands composed of fine-grained, well-mixed olivine–orthopyroxene aggregates. Microstructural observations in the ultramylonites suggest alternating dissolution and precipitation of olivine and orthopyroxene, which may be explained by local changes in silica molality of the percolating fluid (disequilibrium and mass transfer at scales > mm). In the mylonites, olivine shows a crystal preferred orientation (CPO) coherent with dominant (001)[100] glide, probably due to the presence of interstitial fluids during deformation. In the ultramylonites, olivine CPO is weak to very weak, consistently with a decreasing contribution of dislocation creep to deformation. In contrast, fine-grained orthopyroxene in both mylonites and ultramylonites displays a clear CPO characterized by a [001] maximum normal to the foliation, which is not consistent with dislocation glide in any known slip system for orthopyroxene. We interpret this CPO as formed by oriented crystallization during dissolution–precipitation. In the present study, dissolution–precipitation creep predominates only in small-scale ultramylonite bands due to limited fluid availability and localized dynamic permeability. However, this process may be important in intermediate temperature domains of subduction zones, where it may lead to a feedback between strain localization and fluid transport.
ISSN: 0024-4937

hal-01395122
https://hal.archives-ouvertes.fr/hal-01395122
DOI : 10.1016/j.lithos.2016.07.038

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
A series of graphene oxide (GO) and zinc partially substituted magnetite GO-Fe1-xZnxOy (0 ≤ x ≤ 0.285) catalysts were synthesised through a precipitation-oxidation method. The rate constants for the degradation of acid orange seven (AO7) proceeded at a significant faster rate under UV-irradiation (up to 670%) than the conventional heterogeneous Fenton-like reaction. The resultant catalysts were mesoporous, so there was no mass transfer limitation for AO7 to access active sites in the catalysts. Further, maximum increases of rate constant up to 220% occurred as the zinc molar concentration increased from x = 0 to x = 0.159. GO enhanced to incorporation of zinc into the combined metal oxide, whilst zinc limited crystal growth, thus forming smaller crystallite sizes. These features proved to be essential for the improved catalytic activity of the resultant catalysts. The optimised zinc molar value at x = 0.159 delivered the best catalytic activity. © The Royal Society of Chemistry 2016.
ISSN: 2046-2069

hal-01683215
https://hal.univ-antilles.fr/hal-01683215
DOI : 10.1039/c6ra04068c

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper focuses on the analyses of the clastic sedimentary infill of the Coastal Plain of Eastern Mexico, which initiated synchronously with the Laramide orogeny in the vicinity of the Golden Lane. Results of these analyses are used as boundary conditions for calibrating/interpreting seismic profiles across more distal depocenters in the offshore of the Gulf of Mexico, from the sea shore and continental slope in the west to the abyssal plain in the east. The objective of the study is to better predict the reservoir distribution in the Deep offshore Basin of the Gulf of Mexico (DBGM), in order to explore for petroleum. The Coastal Plain is underlain by three morpho-tectonic domains: the tectonic front of the Sierra Madre Orientale (SMO), the Chicontepec deep water flexural basin, and the Tuxpan Platform (also known as the Golden Lane). Each domain is characterized by a distinct, dominantly siliciclastic Cenozoic lithostratigraphy. After a Jurassic rifting episode, followed by thermal subsidence, the oceanic basin and its western passive margin were deformed during the Upper Cretaceous and Paleogene, by far field stresses associated with the Cordilleran-Laramide Orogeny. Starting in the Late Cretaceous-Early Paleogene and during the Early Eocene, the tectonic load associated with the Laramide Orogen (Sierra Madre Oriental, SMO) caused flexural subsidence of the foreland located under the Coastal Plain. During this period, a massive transfer of siliciclastic sediments occurred from the Laramide foothills into the adjacent foreland. Sediments were eroded of the Sierra Madre tectonic wedge. Loading by these sediments pushed source units associated with the former passive margin down ward. The first syn-tectonic sediments of the Laramide orogeny were turbiditic silt layers in submarine fans which record also numerous collapse episodes and gravity slides. During the Late Eocene and Oligocene, the flexural subsidence stopped in the hinterland, whereas the subsidence of the passive margin resumed. This resulted in a change in the overall sedimentary architecture of the basin. Paleo-highs and reefs facies of the Golden Lane were flooded. Clastics by-passed the reefs and progradational clastic stratification formed as sediment moved towards the DBGM in the east. The final depositional environment of the continental platform/Coastal Plain became deltaic, marked by a succession of sand bars, levees and channels systems. From Miocene times onward, a system of gravitational listric faults developed near the platform to slope transition, resulting in a coeval compressional system at the transition between the slope and the abyssal plain. This system is driven by sediments charge. Because the sedimentation rate is larger than the subsidence, a large amount of clastics and slumped sediments are deposited in hangingwall basins.
ISSN: 0264-8172

hal-00424586
https://hal.archives-ouvertes.fr/hal-00424586
DOI : 10.1016/j.marpetgeo.2008.03.009

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : International audience
High-resolution borehole strainmeters are usually installed in tectonically active regions in order to detect slow-slip events, and to estimate slow transients related to earthquake swarms. However, they are also sensitive to other numerous influences, internal or external. Furthermore, the quality of their coupling to the rock through cementation, and the mechanical properties of the rock mass around them, have a critical influence on their records. Many of the existing strainmeters present such problems, and the correction for these effects often remains a challenge. In this paper, we present the analysis of the records of a high-resolution borehole dilatometer (Sacks–Evertson), located in the seismically active rift of Corinth (Greece) (station TRZ in the Trizonia island). We show that the instrument suffers from an only partial-solid coupling, and that the nearby sea tides have a direct (through elastic response) and indirect (through pore-pressure diffusion) effect on the dilatation signal, which adds up to the solid tidal strain source. We propose a methodology that allows, in a first step, to better separate the internal (solid tide) from the external (air pressure, sea level) influences, by calculating a frequency-dependent transfer function outside the range of the tidal periods. We then extrapolate this function, in particular at the tidal periods. In a second step, the resulting variation with frequency of the coupling coefficients with sea level led us to estimate the proportion of instrument not solidly cemented to rock (thus in contact with water pore pressure), which is about 90 % of the total height. Despite the small proportion of solid coupling, the sensor resolution remains very good up to a few tens of hours of a time period, thanks to the confining effects of the rocks on the local pore pressure. These results allow us to correct for the external effects, and reduce the associated variance by 80–90 % (in the period range of minutes to days). The empirical correction of the sea level effect could be explained using a simple Boussinesq’s approximation and 1D pore-pressure diffusion model, which contributed to better constraint of some of the poro-elastic parameters in the vicinity of the instrument. After correction, the solid tidal signal at the 24-h period is almost anti-correlated with those of the theoretical solid tide. This surprising result is consistent with a similar anti-correlation observed for the longest period surface waves (200 s) comparing the TRZ dilatometer signals to the strain measured by a nearby borehole strainmeter (MOK, 15 km). This could be related to the presence of a shallow fault close to the instrument, which would creep in response to seismic wave-related stress.
ISSN: 0033-4533

hal-01122853
https://hal.archives-ouvertes.fr/hal-01122853
DOI : 10.1007/s00024-013-0742-2