Éditeur(s) : HAL CCSD Wiley
Résumé : 1. Functional traits are posited to explain interspecific differences in performance, but these relationships are difficult to describe for long-lived organisms such as trees, which exhibit strong ontogenetic changes in demographic rates. Here, we use a size-dependent model of tree growth to test the extent to which of 17 functional traits related to leaf and stem economics, adult stature and seed size predict the ontogenetic trajectory of tree growth.[br/] 2. We used a Bayesian modelling framework to parameterize and contrast three size-dependent diameter growth models using 16 years of census data from 5524 individuals of 50 rain forest tree species: a size-dependent model, a size-dependent model with species-specific parameters and a size-dependent model based on functional traits.[br/] 3. Most species showed clear hump-shaped ontogenetic growth trajectories and, across species, maximum growth rate varied nearly tenfold, from 0.58 to 5.51 mm year(-1). Most species attained their maximum growth at 60% of their maximum size, whereas the magnitude of ontogenetic changes in growth rate varied widely among species.[br/] 4. The Trait-Model provided the best compromise between explained variance and model parsimony and needed considerably fewer parameters than the model with species terms.[br/] 5. Stem economics and adult stature largely explained interspecific differences in growth strategy. Maximum absolute diameter growth rates increased with increasing adult stature and leaf delta(13)C and decreased with increasing wood density. Species with light wood had the greatest potential to modulate their growth, resulting in hump-shaped ontogenetic growth curves. Seed size and leaf economics, generally thought to be of paramount importance for plant performance, had no significant relationships with the growth parameters.[br/] 6. Synthesis. Our modelling approach offers a promising way to link demographic parameters to their functional determinants and hence to predict growth trajectories in species-rich communities with little parameter inflation, bridging the gap between functional ecology and population demography.
ISSN: 0022-0477

hal-01032387
https://hal.archives-ouvertes.fr/hal-01032387
DOI : 10.1111/j.1365-2745.2011.01883.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : While around 20% of the Amazonian forest has been cleared for pastures and agriculture, one fourth of the remaining forest is dedicated to wood production [1] . Most of these production forests have been or will be selectively harvested for commercial timber, but recent studies show that even soon after logging, harvested stands retain much of their tree-biomass carbon and biodiversity [2,3] . Comparing species richness of various animal taxa among logged and unlogged forests across the tropics, Burivalova et al. [4] found that despite some variability among taxa, biodiversity loss was generally explained by logging intensity (the number of trees extracted). Here, we use a network of 79 permanent sample plots (376 ha total) located at 10 sites across the Amazon Basin [5] to assess the main drivers of time-to-recovery of post-logging tree carbon ( Table S1 ). Recovery time is of direct relevance to policies governing management practices (i.e., allowable volumes cut and cutting cycle lengths), and indirectly to forest-based climate change mitigation interventions.
ISSN: 0960-9822

hal-01536542
https://hal.archives-ouvertes.fr/hal-01536542
DOI : 10.1016/j.cub.2015.07.034
PRODINRA : 343217
PUBMED : 26394096

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Tension wood of Laetia procera (Poepp.) Eichl. (Flacourtiaceae), a neo-tropical forest species, shows a peculiar secondary wall structure, with an alternance of thick and thin layers, while opposite wood of this species has a typical secondary wall structure (S1 + S2 + S3). Samples for the study of microstructural properties were collected upon the estimation of growth stresses in the living tree, in order to analyze the correlation of the former with the latter. Investigation using optical microscopy, scanning electron microscopy and UV microspectrophotometry allowed the description of the anatomy, ultra-structure and chemistry of this peculiar polylaminate secondary wall. In the thick layers, cellulose microfibril angle is very low (i.e., microfibril orientation is close to fibre axis) and cellulose microfibrils are well organized and parallel to each other. In the thin layers, microfibrils (only observable in the inner layer) are less organized and are oriented with a large angle relative to the axis of the cell. Thick layers are lightly lignified although thin layers show a higher content of lignin, close to that of opposite wood secondary wall. The more the wood was under tensile stress, the less the secondary wall was lignified, and lower the syringyl on guaiacyl lignin units' ratio was. The innermost layer of the secondary wall looks like a typical S3 layer with large microfibril angle and lignin occurrence. The interest of this kind of structure for the understanding of stress generation is discussed.
ISSN: 0931-1890

hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923/document
https://hal.archives-ouvertes.fr/hal-00194923/file/Trees_RuelleYoshidaClairThibaut_submitted2006.pdf
DOI : 10.1007/s00468-007-0128-0

Éditeur(s) : HAL CCSD North Carolina State University
Résumé : Few studies have been conducted about relation between cellulose parameters and biomechanical properties of wood in tropical angiosperms species. For this purpose, on 13 trees from 3 species of French Guyana tropical rainforest in a clear active process of restoring verticality, i) growth strains were measured in situ in order to determine the occurrence of tension wood within samples and ii) cellulose structural parameters were estimated on all the samples using X-ray diffraction method. Crystallite size was estimated from the full-width at half-maximum of the Miller index (002) arc diffraction and angle T was measured following Cave's method. Relationships between these parameters and growth stresses were good and the variations between normal and tension wood were significant, i.e. a lower angle T and a larger crystallite size in tension wood. In order to have a good estimation of the microfibril angle in the main layer of the secondary wall for each species, an experimental calibration was done between angle T and microfibril angle observed with scanning electron microscopy.
ISSN: 19302126

hal-01031799
https://hal.archives-ouvertes.fr/hal-01031799
https://hal.archives-ouvertes.fr/hal-01031799/document
https://hal.archives-ouvertes.fr/hal-01031799/file/42-575-1-PB.pdf

Résumé : Une étude de faisabilité de poutres en bois lamellé-collé a été menée en Guyane Française en utilisant les essences locales. Le but est de déterminer les paramètres de collage assurant la bonne résistance mécanique des assemblages par lamellation et par aboutage, nécessaires à la fabrication de poutres en bois lamellé-collé en climat tropical. Trois essences de bois abondantes de différentes densités ont été sélectionnées. Les adhésifs de types Mélamine-Urée-Formol et Résorcinol-Phénol-Formol ont été utilisées. Les paramètres de collage considérés sont : le grammage, le temps d’assemblage fermé et la pression.En utilisant les normes Européennes, plusieurs campagnes de tests ont été conduites sur des échantillons normalisés. Concernant le collage par lamellation, des tests élémentaires de délamination et de cisaillement des joints de colle ont été réalisés. Le test de délamination consiste en deux cycles d’immersion dans l’eau sous pression et de séchage, il induit de sévères variations d’humidité du bois susceptibles de créer des ouvertures des joints de colles. Le collage par aboutage est réalisé sur des poutres normalisées aboutées. Les entures sont obtenues grâce à un outillage standard communément utilisé pour les résineux. Les résultats ont mis en évidence l’influence des propriétés du bois et des paramètres de collage sur la résistance du joint et la résistance mécanique du produit. En effet, les paramètres du bois, tels que la densité, la rétractibilité et l’imprégnation, ont une forte influence sur le collage, en particulier sur la pression et le grammage nécessaires à la production d’un produit commercialisable. Il apparait qu’un bois de densité moyenne et poreux nécessite un grammage et une pression élevés comparé à un bois de densité élevée qui nécessite des valeurs moindres. Aussi, l’influence d’autres paramètres de fabrication, tels que le rabotage, l’encollage double face et simple face ainsi que l’épaisseur des lamelles, a été établie. Par contre il semblerait que le matériel communément utilisé pour l’aboutage des résineux n’est pas adapté aux feuillus tropicaux. En final, des paramètres de collage ont été validés pour la fabrication de lamellé-collé endémique en Guyane Française et une étude du coût de production d’une poutre lamellé-collé standard a identifié les conditions économiques d’une fabrication en Guyane Française.
A feasibility study of glued-laminated timber beams was carried out in French Guiana using local wood species. The aim of the study was to evaluate the gluing parameters that could ensure good mechanical properties for the manufactured glued-laminated beams in tropical climates. Three abundant wood species with different specific gravity were selected for the study. Melamine-Urea-Formaldehyde and Resorcinol-Phenol-Formaldehyde resins were used for gluing. The three gluing parameters considered are: adhesive spread rate, closing assembly time and gluing pressure.Using European standards, several laboratory tests were performed on normalized samples. The evaluation of a successful lamella’s gluing was done by using elementary tests of delamination and shearing. A delamination test consists of two cycles of water immersion at high pressure and drying which induces severe hygroscopic variation in wood thus causing joints opening. The finger-joints are made using a standard tool usually used for cutting softwoods. The performed tests revealed the influence of wood properties and the gluing parameters on the joint resistance and the mechanical properties of the product. Results show that wood properties such as specific gravity, shrinkage coefficient, and permeation, have a high degree of influence on the gluing step especially on the gluing pressure and on the adhesive spread rate needed to produce a commercial product. Furthermore, wood with medium specific gravity needs more adhesive and more pressure than the one with high specific gravity. Additionally, the effects of other manufacturing parameters, such as planning, double or simple side glue spreading and lamellae thicknesses, on the glue joint resistance were demonstrated. Finally, the common tools used for softwoods are not adapted to making the finger joints with tropical hardwoods.In conclusion, optimal gluing parameters for manufacturing glued-laminated timber beams in French Guiana were established and an economical study using standard glued-laminated timber beams revealed the economic conditions under which a successful manufacturing of these local beams can be implemented in French Guiana.

http://www.theses.fr/2011AGUY0484/document

Éditeur(s) : HAL CCSD Wiley
Résumé : 1. Considerable debate surrounds the extent to which tropical forests can be managed for resource extraction while conserving biodiversity and ecosystem properties, which depend on functional composition. Here we evaluate the compatibility of these aims by examining the effects of logging on taxonomic and functional diversity and composition in a tropical forest. 2. Twenty years after selective logging, we inventoried 4140 stems regenerating in logging gaps and adjacent undisturbed areas, and we integrated a database of 13 functional traits describing leaf and wood economics of tropical trees. 3. We found no differences in taxonomic and functional richness among habitats, but logging gaps had significantly higher taxonomic and functional evenness. 4. Logging also effected striking, long-term changes in both species and functional composition. In particular, the xylem density of recruits in logging gaps was 6% less than in unlogged forests, leaves were 11% less tough and had 613% greater mineral nutrient concentrations. 5. Synthesis and applications. Our results suggest that managers of tropical forests should limit overall surface area converted to logging gaps by creating fewer, larger gaps during selective logging, to reduce impacts on the taxonomic and functional composition of the regenerating stand.
ISSN: 0021-8901

hal-01032420
https://hal.archives-ouvertes.fr/hal-01032420
DOI : 10.1111/j.1365-2664.2012.02164.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : Une approche par datations multiples a été menée sur les dépôts de sédiments de crue retrouvés dans les gorges du Gardon (Languedoc). Le plomb-210, le césium-137 et l’analyse géochimique des sédiments contaminés par les mines ont été utilisés pour reconstruire l’histoire des dépôts de crue. Cette approche a été combinée avec l’historique des crues du Gardon depuis 1890 pour affiner l’approche géochronologique. Au niveau de la cavité GG et de la terrasse GE les analyses ont permis d’illustrer les mécanismes d’érosion-redéposition pouvant perturber les séquences de sédiments. Les enregistrements des dépôts de sédiments de crue sont complets sur la terrasse GE située à 10 m au-dessus du lit mineur à partir de 1958, et incomplets auparavant. Sur la période 1880-1958, 25 crues ont eu un débit suffisant (>1450 m3/s) pour recouvrir la terrasse, alors que l’on recense seulement 5 à 6 crues depuis 1958 (pour un débit de submersion supérieur à 1700 m3/s). L’augmentation progressive du débit de submersion et la fréquence moindre d’inondation de la terrasse ont pu permettre sur la période récente la stabilisation de la couche de surface par la végétation et limiter l’érosion lors de crues importantes. Les enregistrements semblent complets dans la cavité GG située à 15 m au-dessus du lit mineur. La fréquence moindre de submersion à ce niveau plus élevé peut expliquer une meilleure stabilisation des dépôts de crue, rendus moins vulnérables à l’érosion. La datation au radiocarbone a été testée même si elle ne permet pas de dater avec précision les dépôts de crue des derniers siècles. Sur la terrasse GE, 80% des dates au carbone 14 sur charbon de bois sont beaucoup trop vieilles par rapport aux autres techniques de datation, ce qui peut s’expliquer par une remobilisation/déstockage de charbons de bois anciens. Les datations radiocarbone sur graines donnent de meilleurs résultats, car issues d’une production annuelle, plus facilement décomposable et moins sujette à des dépôts intermédiaires. Au final, il apparaît que la technique de datation par radiocarbone sur des charbons de bois retrouvés dans les séquences sédimentaires n’est pas fiable, alors qu’elle est la plus pratiquée en paléo-hydrologie. L’utilisation combinée du plomb-210, du césium-137, de l’analyse géochimique des sédiments et des informations sur les crues historiques a permis de discriminer et de dater les différents dépôts de crue de ce dernier siècle dans la cavité GG et la terrasse GE. / A multidating approach was carried out on slackwater flood deposits, preserved in valley side rock cave and terrace, of the Gardon River in Languedoc, southeast France. Lead-210, caesium-137, and geochemical analysis of mining-contaminated slackwater flood sediments have been used to reconstruct the history of these flood deposits. These age controls were combined with the continuous record of Gardon flow since 1890, and the combined records were then used to assign ages to slackwater deposits. The stratigraphic records of terrace GE and cave GG were excellent examples to illustrate the effects of erosion/preservation in a context of a progressively self-censoring, vertically accreting sequence. The sedimentary flood record of the terrace GE located at 10 m above the channel bed is complete for years post-1958 but incomplete before. During the 78-year period 1880-1958, 25 floods of a sufficient magnitude (> 1450 m3/s) have covered the terrace. Since 1958, however, the frequency of inundation of the deposits has been lower:only 5 or 6 floods in 52 years have been large enough to exceed the necessary threshold discharge (> 1700 m3/s). The progressive increase of threshold discharge and the reduced frequency of inundation at the terrace could allow stabilisation of the vegetation cover and improved protection against erosion from subsequent large magnitude flood events. The sedimentary flood record seems complete for cave GG located at 15 m above the channel bed. Here, the low frequency of events would have enabled a high degree of stabilisation of the sedimentary flood record, rendering the deposits less susceptible to erosion. Radiocarbon dating are used in this study and compared to the other dating techniques.Eighty percent of radiocarbon dates on charcoals were considerably older than those obtained by the other techniques in the terrace. On the other hand, radiocarbon dating on seeds provided better results. This discrepancy between radiocarbon dates on charcoal and seeds is explained by the nature of the dated material (permanent wood vs. annual production and resistance to degradation process). Finally, we showed in this study that although the most common dating technique used in paleoflood hydrology is radiocarbon dating, usually on charcoal preserved within slackwater flood sediments, this method did not permitus to define a coherent age model. Only the combined use of lead-210, caesium-137, and geochemical analysis of mining-contaminated sediments with the instrumental flood record can be applied to discriminate and date the recent slackwater deposits of the terrace GE and cave GG.
ISSN: 0169-555X

hal-01059669
https://hal.archives-ouvertes.fr/hal-01059669
https://hal.archives-ouvertes.fr/hal-01059669/document
https://hal.archives-ouvertes.fr/hal-01059669/file/ly2014-pub00040953.pdf
IRSTEA : PUB00040953

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé :  
Cross-species analyses of plant functional traits have shed light on factors contributing to differences in performance and distribution, but to date most studies have focused on either leaves or stems. We extend these tissue-specific analyses of functional strategy towards a whole-plant approach by integrating data on functional traits for 13 448 leaves and wood tissues from 4672 trees representing 668 species of Neotropical trees. Strong correlations amongst traits previously defined as the leaf economics spectrum reflect a tradeoff between investments in productive leaves with rapid turnover vs. costly physical leaf structure with a long revenue stream. A second axis of variation, the 'stem economics spectrum', defines a similar tradeoff at the stem level: dense wood vs. high wood water content and thick bark. Most importantly, these two axes are orthogonal, suggesting that tradeoffs operate independently at the leaf and at the stem levels. By simplifying the multivariate ecological strategies of tropical trees into positions along these two spectra, our results provide a basis to improve global vegetation models predicting responses of tropical forests to global change.
Ecology Letters

hal-01032142
https://hal.archives-ouvertes.fr/hal-01032142
DOI : 10.1111/j.1461-0248.2010.01517.x

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
Wallaba (Eperua falcata) is a tropical wood which is known to have naturally low swelling characteristics. Samples of wallaba heartwood were subjected to differential solvent extraction. Wood pieces that were extracted with methanol experienced significantly higher swelling after rehydration from oven dry to 96% relative humidity in comparison to non-extracted samples and samples extracted with other solvents. Methanol soluble wallaba heartwood extract was purified by high pressure liquid chromatography and the compounds present were characterised by nuclear magnetic resonance spectroscopy. Methanol extract was found to contain a very high relative proportion of polar compounds which are proposed to bind to the polymeric cell wall by multiple hydrogen bonds restricting the association of water and therefore acting as natural anti-swelling agents.
ISSN: 0018-3830

hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942/document
https://hal.archives-ouvertes.fr/hal-00856942/file/Chemical_extractives_tropical_wood_Royer_al.pdf

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
*Context Increased knowledge on diversity in wood properties would have implications both for fundamental research and for promoting a diversification of uses as material. *Aims The objective is to contribute to overcoming the critical lack of data on the diversity of wood dynamic mechanical/viscoelastic vibrational properties, by testing lesser-known species and categorizing sources of variability. *Methods Air-dry axial specific dynamic modulus of elasticity (E'/γ) and damping coefficient (tanδ) were measured on a wide sampling (1792 specimens) of 98 wood types from 79 species. An experimental device and protocol was designed for conducting systematic (i.e. rapid and reproducible) characterizations. *Results Diversity at the specimens' level corroborates the "standard" relationship between tanδ and E'/γ, which is discussed in terms of orientation of wood elements and of chemical composition. Diversity at the species level is expressed on the basis of results for normal heartwood, with specific gravity (γ) ranging from 0.2 to 1.3. Axial E'/γ ranges from 9 to 32 GPa and tanδ from 4×10-3 to 19×10-3. Properties distribution follows a continuum, but with group characteristics. The lowest values of tanδ are only found in certain tropical hardwoods. Results can also suggest alternative species for musical instruments making.
Annals of Forest Science

hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242/document
DOI : 10.1007/s13595-011-0166-z

Éditeur(s) : HAL CCSD Wiley
Résumé : Tropical forests contain an important proportion of the carbon stored in terrestrial vegetation, but estimated aboveground biomass (AGB) in tropical forests varies two-fold, with little consensus on the relative importance of climate, soil and forest structure in explaining spatial patterns. Here, we present analyses from a plot network designed to examine differences among contrasting forest habitats (terra firme, seasonally flooded, and white-sand forests) that span the gradient of climate and soil conditions of the Amazon basin. We installed 0.5-ha plots in 74 sites representing the three lowland forest habitats in both Loreto, Peru and French Guiana, and we integrated data describing climate, soil physical and chemical characteristics and stand variables, including local measures of wood specific gravity (WSG). We use a hierarchical model to separate the contributions of stand variables from climate and soil variables in explaining spatial variation in AGB. AGB differed among both habitats and regions, varying from 78 Mg ha−1 in white-sand forest in Peru to 605 Mg ha−1 in terra firme clay forest of French Guiana. Stand variables including tree size and basal area, and to a lesser extent WSG, were strong predictors of spatial variation in AGB. In contrast, soil and climate variables explained little overall variation in AGB, though they did co-vary to a limited extent with stand parameters that explained AGB. Our results suggest that positive feedbacks in forest structure and turnover control AGB in Amazonian forests, with richer soils (Peruvian terra firme and all seasonally flooded habitats) supporting smaller trees with lower wood density and moderate soils (French Guianan terra firme) supporting many larger trees with high wood density. The weak direct relationships we observed between soil and climate variables and AGB suggest that the most appropriate approaches to landscape scale modeling of AGB in the Amazon would be based on remote sensing methods to map stand structure.
ISSN: 1354-1013

hal-01374829
https://hal.archives-ouvertes.fr/hal-01374829
DOI : 10.1111/j.1365-2486.2011.02432.x
PRODINRA : 183370

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : Climate models predict a range of changes in tropical forest regions, including increased average temperatures, decreased total precipitation, reduced soil moisture and alterations in seasonal climate variations. These changes are directly related to the increase in anthropogenic greenhouse gas concentrations, primarily CO2. Assessing seasonal forest growth responses to climate is of utmost importance because woody tissues, produced by photosynthesis from atmospheric CO2, water and light, constitute the main component of carbon sequestration in the forest ecosystem. In this paper, we combine intra-annual tree growth measurements from published tree growth data and the corresponding monthly climate data for 25 pan-tropical forest sites. This meta-analysis is designed to find the shared climate drivers of tree growth and their relative importance across pan-tropical forests in order to improve carbon uptake models in a global change context. Tree growth reveals significant intra-annual seasonality at seasonally dry sites or in wet tropical forests. Of the overall variation in tree growth, 28.7% was explained by the site effect, i.e. the tree growth average per site. The best predictive model included four climate variables: precipitation, solar radiation (estimated with extrasolar radiation reaching the atmosphere), temperature amplitude and relative soil water content. This model explained more than 50% of the tree growth variations across tropical forests. Precipitation and solar radiation are the main seasonal drivers of tree growth, causing 19.8% and 16.3% of the tree growth variations. Both have a significant positive association with tree growth. These findings suggest that forest productivity due to tropical tree growth will be reduced in the future if climate extremes, such as droughts, become more frequent.
ISSN: 1932-6203

hal-01268529
https://hal.archives-ouvertes.fr/hal-01268529
https://hal.archives-ouvertes.fr/hal-01268529/document
https://hal.archives-ouvertes.fr/hal-01268529/file/journal.pone.0092337.PDF
DOI : 10.1371/journal.pone.0092337

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Heartwood/sapwood profile and the tradeoff between trunk and crown increment in a natural forest: the case study of a tropical tree (Dicorynia guianensis Amsh., Fabaceae) Key message Sapwood area and the radial growth rate of the trunk follow the same pattern at breast height, with an initial increase and subsequent constant value, resulting from the increasing growth allocation toward the crown rather than tree decline. Heartwood area and heartwood volume in the trunk increase more rapidly after this shift occurs. Abstract Sapwood (SW) and heartwood (HW) are two functionally distinct classifications of wood in perennial stems for which quantities can vary greatly in tropical trees. Numerous positive correlations have been found between the radial growth rate (RGR) and SW quantity; however, variations in the SW/HW quantities have not been studied in light of the ontogenetic variation of RGR. Wood core sampling, intensive measurements of tree structure (number of branches, stem volumes), and radial growth monitoring were performed on an abundant and highly exploited tree species in French Guiana (Dicorynia guianensis) to investigate the relationship between RGR, SW/HW quantity, tree structure, and their variations on the course of a tree's ontogeny. SW area and RGR followed the same pattern of variation throughout tree development, both increasing first and reaching a steady state after 50 cm DBH (diameter at breast height). After this value, we observed a strong increase in both the HW area and HW volume increment, concomitant with a more rapid increase in crown volume. The stabilization of RGR for trees with DBH >50 cm was related not to a tree's decline but rather to an increasing wood allocation to the crown, confirming that RGR at breast height is a poor indicator of whole-tree growth for bigger individuals. We also confirmed that HW formation is an ontogenetic process managing SW quantity that is continuously and increasingly produced within the crown as the tree grows. This study highlights the effect of growth-mediated ontogenetic changes on the localization of water and carbohydrate storage within a tree, resulting from SW and HW dynamics throughout tree ontogeny.
ISSN: 0931-1890

hal-01654003
https://hal.archives-ouvertes.fr/hal-01654003
https://hal.archives-ouvertes.fr/hal-01654003/document
https://hal.archives-ouvertes.fr/hal-01654003/file/Lehnebach%20et%20al.%E2%80%94Trees%202016-%20Own%20version.pdf
DOI : 10.1007/s00468-016-1473-7

Éditeur(s) : HAL CCSD
Résumé : Diffusion du document : INRA Antilles-Guyane, UMR ECOFOG, 97387 Kourou, Guyane (France) Diplôme : Master Recherche
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
La forêt tropicale guyanaise comporte entre 200 et 300 espèces d'arbres par hectare, alors qu'une forêt tempérée en compte environ une quinzaine. Les forêts tropicales humides sont des écosystèmes qui recèlent une des plus grandes biodiversités de la planète où les interactions entre les espèces et le milieu environnant atteignent des degrés de complexité élevés. Les arbres développent ainsi des stratégies souvent différentes, notamment celle du contrefil que nous avons cherché à décrire et à caractériser, lors de ce stage de Master 2ème année. Cette structure particulière du bois se retrouve dans une proportion importante dans les forêts tropicales. Elle consiste en une alternance d'hélices en S puis en Z de l'orientation longitudinale des fibres. Le stage s'est déroulé en grande partie en Guyane française, au sein de l'UMR « Ecologie des Forêts de Guyane » sur le site de Paracaïbo (Kourou). La première phase a été la prospection et la description du contrefil sur différentes espèces. Nous nous sommes ensuite intéressés au comportement mécanique en flexion statique et dynamique à différentes échelles. Enfin, au Laboratoire de Mécanique et Génie Civil de Montpellier, nous avons réalisé des mesures de l'angle des micros fibrilles afin de déterminer son évolution en fonction de l'angle du fil. Ainsi, prenant en compte les différentes échelles de description, nous avons mis au point un modèle permettant de prédire le comportement d'une poutre contre filée en flexion, connaissant la répartition du contrefil dans la section, la densité, et le module d'élasticité longitudinal orienté selon le fil du bois.
https://hal.archives-ouvertes.fr/hal-01189254

hal-01189254
https://hal.archives-ouvertes.fr/hal-01189254
PRODINRA : 19939

Éditeur(s) : HAL CCSD Ethnobotany Research and Applications
Résumé :  
We examined the limitations of parataxonomic inventories for developing management plans for woody plant resources in tropical rain forests of southwestern Amazonia. Using compilations of herbarium labels, forest personnel interviews and published species descriptions, we assessed the accuracy of common names as parataxonomic units (PUs). We identified 384 common names for 310 harvested woody plant species in the Brazilian state of Acre, of which only 50% were unique to a single taxonomic species. About 10% of common names referred to more than one species, more than half of which included multiple genera. For the 106 species from the Acre sample common to the MAP region including Madre de Dios, Peru and Pando, Bolivia, we identified 198 common names. Splitting was much more frequent in this sample, with more than 80% of species having more than one common name. When the Acre sample was expanded to 131 species from the Brazilian Amazon region, including the states of Amazonas and Para, we identified 740 common names, with nearly 90% of species being represented by more than one common name. Errors and inaccuracy of parataxonomy may contribute to market instability if product orders can not be homogenized within regional markets, and to unsustainable harvests if species are mistakenly lumped into single parataxonomic units. We discuss several programs currently being implemented by our collaborative team in the region to address this issue, including field guides based on digital photography, field courses, and workshops featuring discussions between regional inventory personnel and botanists.
Ethnobotany Research and Applications

hal-01032130
https://hal.archives-ouvertes.fr/hal-01032130

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Functional aspects of biodiversity were investigated in a lowland tropical rainforest in French Guyana (5°2'N, annual precipitation 2200 mm). We assessed leaf '15N as a presumptive indicator of symbiotic N2 fixation, and leaf and wood cellulose '13C as an indicator of leaf intrinsic water-use efficiency (CO2 assimilation rate/leaf conductance for water vapour) in dominant trees of 21 species selected for their representativeness in the forest cover, their ecological strategy (pioneers or late successional stage species, shade tolerance) or their potential ability for N2 fixation. Similar measurements were made in trees of native species growing in a nearby plantation after severe perturbation (clear cutting, mechanical soil disturbance). Bulk soil '15N was spatially quite uniform in the forest (range 3-5‰), whereas average leaf '15N ranged from m0.3‰ to 3.5‰ in the different species. Three species only, Diplotropis purpurea, Recordoxylon speciosum (Fabaceae), and Sclerolobium melinonii (Caesalpiniaceae), had root bacterial nodules, which was also associated with leaf N concentrations higher than 20 mg gm1. Although nodulated trees displayed significantly lower leaf '15N values than non-nodulated trees, leaf '15N did not prove a straightforward indicator of symbiotic fixation, since there was a clear overlap of '15N values for nodulated and non-nodulated species at the lower end of the '15N range. Perturbation did not markedly affect the difference '15Nsoil m '15Nleaf, and thus the isotopic data provide no evidence of an alteration in the different N acquisition patterns. Extremely large interspecific differences in sunlit leaf '13C were observed in the forest (average values from m31.4 to m26.7‰), corresponding to intrinsic water-use efficiencies (ratio CO2 assimilation rate/leaf conductance for water vapour) varying over a threefold range. Wood cellulose '13C was positively related to total leaf '13C, the former values being 2-3‰ higher than the latter ones. Leaf '13C was not related to leaf '15N at either intraspecific or interspecific levels. '13C of sunlit leaves was highest in shade hemitolerant emergent species and was lower in heliophilic, but also in shade-tolerant species. For a given species, leaf '13C did not differ between the pristine forest and the disturbed plantation conditions. Our results are not in accord with the concept of existence of functional types of species characterized by common suites of traits underlying niche differentiation; rather, they support the hypothesis that each trait leads to a separate grouping of species.
ISSN: 0029-8549

hal-01032378
https://hal.archives-ouvertes.fr/hal-01032378
DOI : 10.1007/s004420050593

Résumé : Arbol pequeño con tallo único raras veces ramificado, frondoso en la parte superior. Hojas grandes de 20 a 60 cm, usualmente palmado 7-lobuladas. Flores macho estaminadas en panículas de 10 cm o más; flores hembras con corola amarilla, pétalos en espiral. Fruto globoso o subgloboso de hasta 30 cm de diámetro, amarillo o anaranjado, con zumo lechoso; numerosas semillas negras.
Petit arbre à tige unique rarement ramifiée, terminée par un bouquet de grandes feuilles de 20 à 60 cm, habituellement digitées. Fleurs mâles garnies d';étamines formant des panicules de 10 cm ou davantage, fleurs femelles à corolle jaune avec pétales en spirale. Fruit sphérique ou formant un globe légèrement allongé dont le diamètre peut atteindre 30 cm, jaune ou orangé, avec un suc laiteux; nombreuses graines noires.
Small tree, short-lived, soft-wooded, single-stem with milky sap, rarely with branches; Leaves alternate, palmate, seven-lobed, bunched at the top with petioles, 20-60 cm long; male flowers born on long pendant racemes or panicles ca.10 cm long; female flowers 1-3 in short cyme with greenish-yellow corolla, petals in spiral; fruit globose or subglobose ca 30 cm in diameter, yellow to orange, with milky sap numerous black seeds with a pulpy coat.
Originaria de América Tropical, ampliamente cultivada en los trópicos.
Originaire d';Amérique tropicale, très cultivée sous les tropiques.
Native to tropical America, cultivated in tropical regions around the world.

http://www.tramil.net/fototeca/plant110

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
The future of tropical managed forests is threatened by climate change. In anticipation of the increase in the frequency of drought episodes predicted by climatic models for intertropical regions, it is essential to study commercial trees' resilience and vulnerability to water stress by identifying potential interaction effects between selective logging and stress due to a lack of water. Focusing on 14 species representing a potential or acknowledged commercial interest for wood production in the Guiana Shield, a joint model coupling growth and mortality for each species was parametrized, including a climatic variable related to water stress and the quantity of aboveground biomass lost after logging. For the vast majority of the species, water stress had a negative impact on growth rate, while the impact of logging was positive. The opposite results were observed for the mortality. Combining results from growth and mortality models, we generate vulnerability profiles and ranking from species apparently quite resistant to water stress (Chrysophyllum spp., Goupia glabra Aubl., Qualea rosea Aubl.), even under logging pressure, to highly vulnerable species (Sterculia spp.). In light of our results, forest managers in the Guiana Shield may want to conduct (i) a conservation strategy of the most vulnerable species and (ii) a diversification of the logged species. Conservation of the already-adapted species may also be considered as the most certain way to protect the tropical forests under future climates.
ISSN: 1999-4907

hal-01315432
https://hal-sde.archives-ouvertes.fr/hal-01315432
DOI : 10.3390/f7050105

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Radial trends of vibrational properties, including the specific dynamic modulus (E'/r) and damping coefficient (tand), were investigated for 3 tropical rainforest hardwood species, Simarouba amara, Carapa procera and Symphonia globulifera by free-free flexural vibration test. The microfibril angle (MFA) was estimated through X-Ray diffraction. Consistent patterns of radial variations were observed for all studied properties. E'/r was found to decrease from pith to bark, which is strongly related to the increasing pith-bark trend of MFA. The variation of tand along the radius can be partly explained by MFA, and partly by the gradient of extractives due to heartwood formation. The coupling effect of MFA and extractives could be separated through the analysis of log(tand) - log(E'/r) diagram. For the studied species, the extractive content putatively associated to heartwood formation generally tends to decrease the wood damping coefficient. However, this weakening effect of extractives was not observed for inner part of the heartwood, suggesting the mechanical action of extractives was reduced during their chemical ageing.
ISSN: 1435-0211

hal-00797055
https://hal.archives-ouvertes.fr/hal-00797055
https://hal.archives-ouvertes.fr/hal-00797055/document
https://hal.archives-ouvertes.fr/hal-00797055/file/Radial_variations_vibrational_Zhang_al.pdf

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : Tree mortality in tropical forests is a complex ecological process for which modelling approaches need to be improved to better understand, and then predict, the evolution of tree mortality in response to global change. The mortality model introduced here computes an individual probability of dying for each tree in a community. The mortality model uses the ontogenetic stage of the tree because youngest and oldest trees are more likely to die. Functional traits are integrated as proxies of the ecological strategies of the trees to permit generalization among all species in the community. Data used to parametrize the model were collected at Paracou study site, a tropical rain forest in French Guiana, where 20,408 trees have been censused for 18 years. A Bayesian framework was used to select useful covariates and to estimate the model parameters. This framework was developed to deal with sources of uncertainty, including the complexity of the mortality process itself and the field data, especially historical data for which taxonomic determinations were uncertain. Uncertainty about the functional traits was also considered, to maximize the information they contain. Four functional traits were strong predictors of tree mortality: wood density, maximum height, laminar toughness and stem and branch orientation, which together distinguished the light-demanding, fast-growing trees from slow-growing trees with lower mortality rates. Our modelling approach formalizes a complex ecological problem and offers a relevant mathematical framework for tropical ecologists to process similar uncertain data at the community level.
ISSN: 1932-6203

hal-01190561
https://hal.archives-ouvertes.fr/hal-01190561
PRODINRA : 208582
PUBMED : 23675500
DOI : 10.1371/journal.pone.0063678