Éditeur(s) : Mercator Ocean
Résumé : Pre-operational system PREVIMER provides with coastal observations and forecasts along French coasts: currents, waves, sea levels, temperature, salinity, primary production and turbidity. These marine environmental data come from in situ observations, satellite images, and numerical models. They are centralized and archived in PREVIMER databases, then published on website (real time and historical data), and freely available to users, private companies as well as public administrations. This paper describes in details PREVIMER components and users.
Mercator Ocean - Quarterly Newsletter (Mercator Ocean), 2014 , N. 49 , P. 3-8

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00189/30037/28523.pdf
http://archimer.ifremer.fr/doc/00189/30037/

Éditeur(s) : Ieee-inst Electrical Electronics Engineers Inc
Résumé : The synthetic aperture radar (SAR) Doppler centroid has been used to estimate the scatter line-of-sight radar velocity. In weak to moderate ocean surface current environment, the SAR Doppler centroid is dominated by the directionality and strength of wave-induced ocean surface displacements. In this paper, we show how this sea state signature can be used to improve surface wind retrieval from SAR. Doppler shifts of C-band radar return signals from the ocean are thoroughly investigated by colocating wind measurements from the ASCAT scatterometer with Doppler centroid anomalies retrieved from Envisat ASAR. An empirical geophysical model function (CDOP) is derived, predicting Doppler shifts at both VV and HH polarization as function of wind speed, radar incidence angle, and wind direction with respect to radar look direction. This function is used into a Bayesian inversion scheme in combination with wind from a priori forecast model and the normalized radar cross section (NRCS). The benefit of Doppler for SAR wind retrieval is shown in complex meteorological situations such as atmospheric fronts or low pressure systems. Using in situ information, validation reveals that this method helps to improve the wind direction retrieval. Uncertainty of the calibration of Doppler shift from Envisat ASAR hampers the inversion scheme in cases where NRCS and model wind are accurate and in close agreement. The method is however very promising with respect of future SAR missions, in particular Sentinel-1, where the Doppler centroid anomaly will be more robustly retrieved.
Ieee Transactions On Geoscience And Remote Sensing (0196-2892) (Ieee-inst Electrical Electronics Engineers Inc), 2012-07 , Vol. 50 , N. 7 , P. 2901-2909

Droits : 2012 IEEE
http://archimer.ifremer.fr/doc/00088/19896/17554.pdf
DOI:10.1109/TGRS.2011.2174998
http://archimer.ifremer.fr/doc/00088/19896/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This work focuses on the analysis of a unique set of seismological data recorded by two temporary networks of seismometers deployed onshore and offshore in the Central Lesser Antilles Island Arc from Martinique to Guadeloupe islands. During the whole recording period, extending from January to the end of August 2007, more than 1300 local seismic events were detected in this area. A subset of 769 earthquakes was located precisely by using HypoEllipse. We also computed focal mechanisms using P-wave polarities of the best azimuthally constrained earthquakes. We detected earthquakes beneath the Caribbean forearc and in the Atlantic oceanic plate as well. At depth seismicity delineates the Wadati-Benioff Zone down to 170 km depth. The main seismic activity is concentrated in the lower crust and in the mantle wedge, close to the island arc beneath an inner forearc domain in comparison to an outer forearc domain where little seismicity is observed. We propose that the difference of the seismicity beneath the inner and the outer forearc is related to a difference of crustal structure between the inner forearc interpreted as a dense, thick and rigid crustal block and the lighter and more flexible outer forearc. Seismicity is enhanced beneath the inner forearc because it likely increases the vertical stress applied to the subducting plate.
ISSN: 0040-1951

hal-01052679
https://hal.archives-ouvertes.fr/hal-01052679
DOI : 10.1016/j.tecto.2011.08.006

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have analyzed shear wave splitting recorded by portable and permanent broadband and long-period stations located in the eastern United States. Teleseismic shear waves (SKS, SKKS, and PKS) were used to retrieve the splitting parameters: the orientation of the fast wave polarization plane ϕ and the delay time δt. In total, 120 seismic events were processed, allowing for more than 600 splitting measurements. Within the Appalachians, stations located in the western (external) part are characterized by δt≈1s and ϕ trending N50°– 70°E in the south and central regions and N30°–40°E in the north, closely following the trend of the orogenic belt in these areas. The transition region between north and central is characterized by δt≈1–1.3 s and by E-W trending ϕ that are at a high angle to the regional geologic trend. Measurements at two stations located in the eastern (internal) part of the belt indicate very weak anisotropy. The large-scale pattern of anisotropy is not consistent with that predicted for simple asthenospheric flow beneath the plate. Splitting along the southern and eastern margins of the continent is consistent with that expected for Grenvillian deformation, an alternative model of asthenospheric flow around the cratonic keel cannot be ruled out. Within the cratonic core, the correlation between δt and lithospheric thickness suggests a lithospheric anisotropy. Smaller-length-scale variations also argue for a significant contribution of lithospheric structures. The fabric responsible for shear wave splitting may have formed during tectonic episodes that affected the eastern United States, i.e., the Grenville and Appalachian orogenies and the subsequent rifting of the North Atlantic Ocean. Our observations in the western Appalachians suggest that the anisotropy may be preserved since the Grenvillian orogeny. The absence of detectable splitting in the two stations in the eastern Appalachians is attributed to the igneous intrusions related to the Atlantic rifting. The measurements in the transition between the northern and central southern Appalachians, constitute an intriguing anomaly, whose E-W ϕ have little obvious relation to the regional surface geology. We suggest two possible causes: (1) the local dominance of asthenospheric flow, motivated by the proximity of a pervasive low-velocity anomaly and (2) lithospheric deformation in a transcontinental strike-slip fault zone active during the Appalachian collision.
ISSN: 2169-9313

hal-01388859
http://hal.univ-reunion.fr/hal-01388859
http://hal.univ-reunion.fr/hal-01388859/document
http://hal.univ-reunion.fr/hal-01388859/file/Barruol_JGR_1997.pdf
DOI : 10.1029/96JB03800

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Climatic changes result in an increased in mean temperature and in a higher incidence of extreme weather events such as heat and cold waves. For ectotherms, such as insect parasitoids, the ability to remain active under extreme climatic conditions is a significant key to fitness. The body size of individuals, and in particular their surface to volume ratio, may play a role in their resistance to thermal conditions. The thermal tolerances are investigated of two closely-related sympatric parasitoid species [Aphidius avenae Haliday and Aphidius rhopalosiphi De Stefani-Perez (Hymenoptera: Aphidiinae)] that have a similar ecology but differ in body size and phenologies. The critical thermal limits of individuals are assessed in both sexes of each parasitoid species and the influence of surface-volume ratios on their thermal tolerances. Aphidius avenae is less resistant to low temperatures and more resistant to high temperatures than A. rhopalosiphi. The lower surface to volume ratio of A. avenae individuals may help them to remain active in summer when experiencing heat waves. However, body size is not the sole factor that plays a role in differences of thermal tolerance between species and body size may not be an adaptation to extreme temperatures but rather a by-product of developmental regulation. Closely related sympatric species from the same ecological guild can have different thermal tolerances that may allow them to occur within the same habitat. The present study also highlights the importance of clearly defining how to measure critical thermal limits to determine the thermal tolerance of a species.
ISSN: 0307-6962

hal-00589094
https://hal.archives-ouvertes.fr/hal-00589094
DOI : 10.1111/j.1365-3032.2010.00758.x

Éditeur(s) : HAL CCSD
Résumé : International audience
The present research work is a part of the KUNSHEN Franco-Taiwanese research project which aims at investigating the hydro/morphodynamics of barrier islands driven by typhoon events. This study focuses on the impact of the Talim tropical storm on the Wan-tzu-liao sand barrier (Taiwan) in terms of water level rising and watertable overheight. In-situ measurements are provided by a cross-shore network of pressure sensors extended from the intertidal zone to the top of the barrier. Extreme offshore wave conditions are encountered during Talim, with significant wave height greater than 10m at the storm peak. It is shown that measured setups are smaller than those predicted by usual empirical parameterization. Groundwater dynamics is strongly affected by the storm, with watertable overheight of the order of one meter under the barrier top. Watertable dynamics is influenced by waves, tides and rainfalls.
Coastal Dynamics 2013

hal-00831573
https://hal.archives-ouvertes.fr/hal-00831573

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The anisotropic single crystal seismic properties are reviewed in the light of recent experimental and theoretical determinations. Although considerable progress has been made on the determination of single crystal properties, data are still lacking, particularly for the temperature derivatives of transition zone and lower mantle phases. The common types of LPO of olivine, opx and cpx are presented together with their associated seismic properties. It is emphasized that simple seismic symmetry pattern of upper mantle rocks are a direct result of the interaction of olivine, opx and cpx. Using the standard structural frame (X lineation, Z pole to foliation) for typical LPOs of olivine, opx and cpx have the maximum Vp parallel to X, in the XZ plane and parallel to Y respectively. Destructive interference occurs between these minerals and hence P-wave anisotropy should be sensitive to the aggregate composition. For shear wave splitting (dVs) typical olivine and opx LPOs result in similar patterns with the maximum dVs in the YZ plane and the fast split shear wave (Vs1) polarized parallel to the foliation. A typical cpx LPO on the other hand produces destructive interference as the max dVs is close to X. By comparison with experiments and numerical simulations, it is estimated that upper mantle samples have an olivine LPO strength which recorded shear strain gamma of between 0.25 and 2.0. Pyrolite and piclogite models are compared with global transverse isotropic models. The slowly reducing P-wave anisotropy in the first 200 km can be explained by a model with constant composition and LPO strength. The sharp decrease in the observed anisotropy in the global models cannot be explained by the transformation of opx to cpx at 300 km, it is proposed that this decrease is due to a reduction in LPO strength from 200 to 350 km at the base of the lithosphere.
Earth's Deep Interior: Mineral Physics and Tomography From the Atomic Scale to the Global Scale

ISBN : 9780875909752
hal-01391524
http://hal.univ-reunion.fr/hal-01391524
http://hal.univ-reunion.fr/hal-01391524/document
http://hal.univ-reunion.fr/hal-01391524/file/Mainprice_AGUmonog_DM_GB_WBI_2000.pdf

Éditeur(s) : HAL CCSD Coastal Education and Research Foundation, Inc.
Résumé : International audience
Morphodynamics of sandy, macrotidal, embayed beaches is complex because of the numerous physical processes interacting at the same location over a wide range of temporal scales. As most of these processes are controlled by beach morphology, dynamic feedbacks are generally observed between hydro- and morphodynamics. Investigating short-term processes is essential in order to improve long term morphological prediction. A key question is to understand how beach slope reacts to forcing conditions, in particular the response time of the beach profile, how long the transient state lasts. This study deals with the spatial and temporal responses of beach morphology to varying incident conditions. Here we report main observations, preliminary results and on-going investigations on the DYNATREZ1 field campaign, which was conducted in the framework of the National Observation Service Dynalit. Beach profiles are shown to adapt rapidly to forcing conditions, within two days, with more intense variations observed in the high tide swash zone. The presence of infragravity waves and their dissipation on the beach is highlighted. It is likely that the very large variability in beach slope observed over a single neapspring cycle is responsible for the accordingly large variability in wave skewness, asymmetry and breaking processes, and thus in sediment fluxes and morphological changes.
ICS 2016 Sydney
Sydney, Australia

hal-01254465
https://hal.archives-ouvertes.fr/hal-01254465
DOI : 10.2112/SI75-075.1

Éditeur(s) : HAL CCSD
Résumé : The method of shear-wave splitting provides a unique possibility to identify seismic anisotropy, which is a result of the preferred orientations of the anisotropic minerals by deformation. The novel software SplitLab, presented in this thesis, simplifies the data processing. The comparison of three independent techniques makes it possible to associate an objective quality to the results and also to define a criterion to automatically detect events without splitting (“Nulls”). This criterion is applied to shear-wave splitting measurements at 16 stations located on the East European Craton. The results indicate that the fast directions reflect the ancient blocks, which constitute the East European Craton. The fast directions in south-west are aligned with the margin of the craton and continue the general tendency of offcraton stations. The stations in the Ural foredeep show fast directions perpendicular to the general tendency of the mountain chain. Various indicators give reason to assume lithospheric origins of anisotropy
La mesure du déphasage des ondes de cisaillement offre la possibilité de caractériser l'anisotropie sismique présente dans les différentes couches de la Terre, qui résulte généralement des orientations préférentielles des minéraux anisotropes induites par la déformation. Le nouveau logiciel SplitLab présenté dans cette thèse, simplifie le traitement des données depuis la requête des données jusqu'à la masure de déphasage et l'interprétation des résultats. La comparaison de trois techniques indépendantes pour mesurer ce déphasage permet de quantifier la qualité des résultats et de détecter automatiquement les mesures sans déphasage apparent. Ce critère est appliqué aux mesures de déphasages des ondes SKS enregistrées en 16 stations situées sur le Craton Est Européen. Les résultats indiquent que les directions rapides reflètent les structures anciennes, qui constituent le Craton Est Européen. En outre, les directions rapides dans le Sud-ouest s'alignent avec la bordure du craton et sont en continuité avec la tendance générale définie par les stations éloignées du Craton. Les stations dans les unités externes de l'Oural montrent des directions rapides perpendiculaires à la tendance générale de la chaîne de montagne.
https://tel.archives-ouvertes.fr/tel-00539114

tel-00539114
https://tel.archives-ouvertes.fr/tel-00539114
https://tel.archives-ouvertes.fr/tel-00539114/document
https://tel.archives-ouvertes.fr/tel-00539114/file/thesewustefeld.pdf

Éditeur(s) : HAL CCSD
Résumé : The Franceville Basin (2.1 Ga) in southeastern Gabon, hosts a black shale series well preserved (FB Formation) which represents an exceptional example of unmetamorphised Paleoproterozoic sediment strata. This basin includes the protore of one of the largest Mn-oxide laterite ore worldwide, mined by Eramet-Comilog. The aim of this this work is to determine formation conditions of this protore and to characterize the global sedimentary evolution of the FB Formation which include the protore. This 75 m thick protore is constituted of Mn carbonate-rich black shales which represent a potential ore deposit for the future. It was drilled, on the Bangombé plateau, during a recent campaign of 24 boreholes with an average depth of 125 m.Through multidisciplinary study on these cores and key outcrops of the basin, this work focuses on : i) the depositional environment of the Mn-protore and FB Formation ; ii) the processes of formation of the Mn-carbonates at 2.1 Ga and iii) the architecture and distribution of Mn-rich levels of the protore on the Bangombé Plateau.A detailed sedimentological and petrological study allowed us to redefine the division of the FB into nine units, named U1 to U9 from the base to the top. These units show a fine upward cycle up to U5 and a reverse coarse loop until U9. This division leads to a new interpretation to propose an evolution from a shoreface depositional environment controlled by deltaic currents (U1) to an offshore depositional environment with anoxic conditions (U2). In this basin, a system of submarine fan is developed, feeding a network of sand injections (injectites) covering the Bangombé plateau (70 km²) and with a thickness of 150 m affecting U4 to U7, including the Mn-protore. The protore depositional environment formed below the wave base limit (U4, U5 and U6) in a starved basin, controlled by biochemical sedimentation allowed the formation of Mn-carbonates. The end of starved basin, would allow the re-opening of the detrital input into the offshore basin (U7). This basin is then filled by storm bar deposits intersected by deltaic sub-aquatic channels (U8). The U9 unit corresponds to a quiet lagoon environment, allowing the multicellular organism development for the first time on the planet.A geochemical study allowed the characterization of the depositional environment of Mn-carbonates as an anoxic to sub-oxic and alkaline environment. For the first time, we showed that the manganese carbonates, present as bacteriomorph forms, are precipitated from the seawater by the mediated photosynthetic cyanobacterial activity, which allows CO2 / HCO3 depression of the environment and a local increase of pH. The cyanobacterial activity is controlled by the absence of bottom currents, which increase the detrital input. This would stop the activity of the cyanobacteria and thus would lead to the decrease of the Mn-concentration along the protore.Finally, well-log and a sequential correlation analyses allowed us to detail spatial and timing repartition of FB Formation deposit, controlled by a tectono-sedimentary model. We propose two- tectono-sedimentary phases. A first syn-tectonic phase (U1 to U3) controls the depocentres and sedimentation gaps. Turbidite coarse deposits are located in the most subsident part, clay deposits rather on the slope and carbonates on shoals. A second post-tectonic phase (U4 to U7) allows isopach deposits. The Mn-protore formed during the post-tectonic phase. However, it shows a variable thickness due to subsidence to the north of the Bangombé plateau. So, on the Bangombé plateau, Mn-contents increase towards the south, whereas the protore thickness increases towards the NNE. Moreover sand injectites decrease Mn-content in the eastern part of the Bangombé plateau and impact on the economic evaluation of the Mn-carbonates. Currently, the protore is structured by post-sedimentary faults, which lead to a non-continuity of the high Mn levels on the Bangombé plateau.
Le Bassin de Franceville situé au SE du Gabon présente une série de black shales (Formation FB) d'âge Paléoprotérozoïque (2,1 Ga) surmontant les grès de la Formation FA. Ce bassin peu déformé et non métamorphique représente une archive exceptionnelle des processus de dépôt de cette période de l’histoire de la Terre où la vie commence à se développer. En particulier, la Formation FB contient le protore d'un gisement mondial d'oxydes de manganèse exploité par la société Eramet-Comilog. L’objectif de ce travail est de préciser les conditions de formation de ce protore et de le replacer dans l’histoire du remplissage du bassin. Ce protore d'une épaisseur moyenne de 75 m est constitué de carbonates de manganèse ; il a fait l'objet d'une récente campagne de 24 forages carottés d'une profondeur moyenne de 125 m sur le plateau de Bangombé.A travers une approche pluridisciplinaire comprenant l'étude de ces forages et des affleurements clefs du bassin, ce travail porte sur la caractérisation i) de l'environnement de dépôt du protore et des séries qui l'encadrent (du toit du FA au toit du FB) ; ii) du mode de formation des carbonates de Mn à 2,1 Ga et iii) de l'architecture et de la répartition des hautes teneurs en Mn du protore qui représente un gisement potentiel du futur.L’étude pétro-sédimentaire détaillée a permis de distinguer neuf unités (U1 à U9) au sein de la Formation FB organisées suivant un cycle rétrogradant jusqu’à U5 puis progradant jusqu’à U9. Ce découpage montre une évolution du milieu de dépôt depuis un domaine de shoreface contrôlé par des courants deltaïques (U1) évoluant vers des dépôts d’offshore restreint (U2). Ce bassin enregistre ensuite un système de chenaux-levées turbiditiques (U3) qui alimentent un réseau d'injectites reconnu sur l’ensemble du Pl. de Bangombé et qui traverse 150 m de série (U4 à U7) en affectant le protore et ainsi les teneurs en Mn. L'environnement de dépôt du protore (U5 et U6) marque l’isolement du bassin qui devient affamé et contrôlé par une sédimentation biochimique à l’origine du dépôt des carbonates de Mn. L'Unité 7 correspond à la réouverture des apports détritiques en domaine d'offshore supérieur puis en domaine de shoreface dominé par des dépôts de tempêtes et de chenaux sous-aquatiques deltaïques (U8), et enfin lagunaire (U9) dans lequel apparaissent les premiers métazoaires de l’histoire de la planète, suivant une séquence régressive.Une étude géochimique a permis de préciser les conditions de dépôt du protore qui se forme en milieu alcalin anoxique à sub-oxique. Dans ce milieu, nous montrons pour la première fois une précipitation directe des carbonates de Mn sous forme bactériomorphe induite par l'activité photosynthétique des cyanobactéries qui consomment le CO2/HCO3 et conduisent à une augmentation du pH favorable à la formation des carbonates de Mn. L'activité cyanobactérienne est conditionnée par l’absence de courants de fond qui augmentent la turbidité du milieu et stoppent cette dernière.Les corrélations diagraphiques et séquentielles permettent de préciser la répartition spatiale et temporelle du FB permettant ainsi de replacer le protore dans l’histoire tectono-sédimentaire du bassin. Une première phase syn-tectonique (U1 à U3) contrôle l’épaisseur et la mise en place de dépôts turbiditiques dans les parties subsidentes, de dépôts argileux sur les pentes et de dépôt de carbonates sur les hauts-fonds. La seconde phase post tectonique (U4 à U7) permet la mise en place de dépôts relativement isopaques, bien que le protore enregistre une subsidence plus importante au nord du Pl. de Bangombé. On observe ainsi, sur le Plateau de Bangombé, des teneurs en Mn qui augmentent vers le sud alors que l’épaisseur du protore augmente vers le NNE. Postérieurement au dépôt du FB, le protore est structuré par des failles qui le compartimentent en touches de piano limitant ainsi sa continuité sur le Plateau de Bangombé.
https://hal.archives-ouvertes.fr/tel-01621460

tel-01621460
https://hal.archives-ouvertes.fr/tel-01621460
https://hal.archives-ouvertes.fr/tel-01621460/document
https://hal.archives-ouvertes.fr/tel-01621460/file/these_Dubois2017-MnGabon.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Holocene Lake Mega-Chad (LMC) was the largest late Quaternary water-body in Africa. The development of this giant paleo-lake is related to a northward shift of the isohyetes interpreted as evidence for an enhanced Monsoon (African Humid Period). Numerous preserved coastal features have been described all around the LMC shore. Such features reveal the main paleo-hydrodynamical tendencies. In the context of a closed water-body like LMC, hydrodynamics are forced mainly by winds. We use a three-dimensional numerical model (SYMPHONIE) to simulate the mean hydrodynamics in LMC under both Harmattan-like (northeasterly trade winds) and Monsoon-like (southwesterly winds) forcings. The northern part of LMC displays coastal features, such as sand spits, that are consistent with the simulations forced by Harmattan-like winds. Geomorphic features related to Monsoon-driven hydrodynamics are not clearly expressed. They could have developed during the early stage of LMC but subsequently reworked. At the time of sand-spit building, Harmattan-like driven hydrodynamics prevailed and related coastal features were preferentially preserved in the sedimentary record.
ISSN: 0033-5894

hal-00475633
https://hal.archives-ouvertes.fr/hal-00475633
DOI : 10.1016/j.yqres.2009.10.010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Joint inversions are now commonly used in the earth sciences. They have been developed to better understand the structure of the earth, since they provide more constraints on the inverted parameters. We propose a new process to simultaneously invert several data sets in order to better image 3D crustal and upper mantle structures. Our inversion uses three kinds of data that present good complementarity: (1) P-wave receiver functions to provide Moho depth variations, (2) teleseismic delay times of P-waves to retrieve velocity anomalies in the crust and the upper mantle, and (3) gravity anomalies to image density variations at the lithospheric scale. We use a stochastic scheme, where receiver functions are first inverted. The interpolated resulting Moho depths are incorporated as a priori information into the joint inversion of teleseismic delay times and gravity anomalies process. Moreover, velocity and density can be linked by empirical relationships, which justifies the joint inversion of those parameters. In our stochastic approach, we perform a model space search for Moho variations, P-velocity, and density structure to find an acceptable fit to the three data sets. In order to preferentially sample the good data fit regions, we chose the neighborhood algorithm of Sambridge to optimistically survey the model space. We model the delay times with 3D raytracing using evenly spaced velocity-density nodes. We present here the first results given by this method on synthetic tests. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0098-3004

hal-00643158
https://hal.archives-ouvertes.fr/hal-00643158
DOI : 10.1016/j.cageo.2010.11.017

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This study describes a laboratory experiment on rip current circulations over a moveable bed. Rip current characteristics over eight contrasting nature-like beach morphologies are investigated. The seabed varied from reasonably alongshore uniform to strongly alongshore nonuniform with crescentic patterns and bar-rip morphologies, representative of a full morphological down-state sequence. The same offshore shore-normal waves were generated by the wavemaker for the eight situations with the same mean water level to study the sensitivity of rip current characteristics as a function of the beach morphology only. In each case, a 30 to 60 min video run was used to track a large number of drifters released within the surf zone. Results show the presence of classic rip current patterns with counterrotating cells and a relatively narrow offshore-directed jet varying from shore-normal to strongly skewed. Wave-driven circulations were strongly unstable. Computed standard deviations of flow intensity and direction provide high-resolution information on the spatial variability of rip current instabilities. Highly pulsating and weakly directionally variable offshore-directed flow is observed in the rip neck for well-developed bar-rip morphologies that turns into a weakly pulsating and highly directional variable rip current flow with decreasing beach alongshore nonuniformity. Proposing a definition of rip current intensity based on the rip current circulation geometry, rip current intensity was found to linearly increase with increasing measure of beach alongshore nonuniformity within both the low-energy and moderate-energy rip current regimes. To date, our laboratory experiment provides the first extensive quantitative rip current information during a full down-state sequence for a given wave condition.
ISSN: 0148-0227

hal-00602920
https://hal.archives-ouvertes.fr/hal-00602920
DOI : 10.1029/2010JC006343

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
How reliable are shear wave splitting measurements as a means of determining mantle flow direction? This remains a topic of debate, especially in the context of subduction. The answer hinges on whether our current understanding of mineral physics provides enough to accurately translate between seismic observations and mantle deformation. Here, we present an integrated model to simulate strain-history-dependent texture development and estimate resulting shear wave splitting in subduction environments. We do this for a mantle flow model that, in its geometry, approximates the double-sided Molucca Sea subduction system in Eastern Indonesia. We test a single-sided and a double-sided subduction case. Results are compared to recent splitting measurements of this region by Di Leo et al. (2012a). The setting lends itself as a case study, because it is fairly young and, therefore, early textures from the slab's descent from the near surface to the bottom of the mantle transition zone--which we simulate in our models--have not yet been overprinted by subsequent continuous steady state flow. Second, it allows us to test the significance of the double-sided geometry, i.e., the need for a rear barrier to achieve trench-parallel subslab mantle flow. We demonstrate that although a barrier amplifies trench-parallel subslab anisotropy due to mantle flow, it is not necessary to produce trench-parallel fast directions per se. In a simple model of A-type olivine lattice-preferred orientation and one-sided subduction, trench-parallel fast directions are produced by a combination of simple shear and extension through compression and pure shear in the subslab mantle.
ISSN: 1525-2027

hal-01053506
https://hal.archives-ouvertes.fr/hal-01053506
DOI : 10.1002/2013GC005032

Éditeur(s) : Gauthier-Villars
Résumé : Coastal lagoons have formed where marine inlets or embayments have become partly or wholly enclosed by depositional spits and barriers, built up as a sequel to the world-wide Holocene marine transgression. Spits and barriers consist of sediment (sand, shingle) derived from the sea floor or carrier alongshore from river mouth or eroding cliff sources; they have been shaped primarily by wave action, some migrating landward while others have remained in position or prograded seaward. A modern prevalence of erosion on barrier coastlines, recession resulting from net losses of sediment offshore, alongshore, or landward has been deomonstrated. This is the outcome partly of rising sea level and partly of diminishing sediment supply. Often the consequence of man's impacts on coastal environments. Examples are given of changes that have resulted from the cutting of artificial entrances through barriers to the building of barriers across tidal inlets to exclude marine penetration.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1982

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00246/35750/34258.pdf
http://archimer.ifremer.fr/doc/00246/35750/

Éditeur(s) : HAL CCSD Society of Exploration Geophysicists
Résumé : low frequency seismic attenuation
International audience
The study of wave attenuation in partially saturated porous rocks over a broad frequency range provides valuable information about the fluid system of reservoirs, which are inherently multiple phase fluid system. Until now, not much laboratory data have been collected in the seismically relevant low frequency range and existing literature data on partially saturated rock are very limited. The main goal of our work is to experimentally measure the bulk seismic attenuation on fluid-bearing rocks, using natural rock samples in an efficient way at in situ conditions. We are currently fine-tuning our attenuation measurement prototype. Preliminary bench-top results are promising and show consistency with reported experimental data with dry, partially and fully fluid saturated rocks. Measurements with the machine are accurate and precise.
ISSN: 1052-3812

hal-00564863
https://hal.archives-ouvertes.fr/hal-00564863
DOI : 10.1190/1.3513397

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We determine the elasticity of FeSiO3 perovskite for various spin configurations using density-functional theory calculations. The elastic moduli and the bulk seismic wave velocities are weakly affected by the spin transition. However we show that the intrinsic differences in seismic anisotropy between the high-spin and low-spin phases of Fe-bearing perovskite coupled with lattice preferred orientation that can develop due and during the convection may lead to distinct seismic signatures between the top and the bottom of the lower mantle. These signatures should be detectable in observations and they need to be taken into account in tomographic studies of the Earth's lower mantle.
ISSN: 0094-8276

hal-00512662
https://hal.archives-ouvertes.fr/hal-00512662
DOI : 10.1029/2010GL043320

Éditeur(s) : HAL CCSD Elsevier
Résumé : SUBSURF
Statistical sequential analysis was performed on a series of sediment cores collected from the Têt prodelta in the Gulf of Lions, northwestern Mediterranean Sea, between October 2003 and October 2004. Seabed changes during that period were correlated to hydrodynamic conditions (waves and currents) and river discharge. Low sediment supply prevents full preservation of new sediment strata on this low-accumulation prodelta located on a microtidal, storm-dominated inner shelf. Severe meteorological events caused a rapid succession of erosion and deposition phases. For example, the December 2003 flood and storm produced a flood layer deposit that persisted for 2 months with only slight transformations due to early diagenesis and/or bioturbation, until a new storm event eroded this layer. A typical sedimentary sequence was observed for the secular deposits composed of a 10-cm-thick sandy layer overlaying siltyclayey layers. These characteristic features were used to analyse the last millennia sedimentary record of the Têt prodelta. The low preservation of freshly deposited sediments and variable sedimentation rates during the last millennia period yield a sedimentary sequence formed by the outcropping of muddy prodeltaic units intersected by heterogeneous siltysandy units similar to those formed under present day hydrodynamic conditions. No flood layer was found related to catastrophic flooding of the last century in the sedimentary record. The Little Ice Age ( 1550–1850 AD) probably favoured the formation of a well-developed muddy prodelta in the mouth of the Têt River. Later on, the decrease of sediment supply by rivers due to climate change and/or human activities (damming, irrigation), and the increase of the number of high-energy storms reaching the coast, induced a coarsening of the top sediment layer on this prodelta. This modern change of the substrate is also observed in the composition of benthic biota found in the substrate
ISSN: 0025-3227

hal-00407662
https://hal.archives-ouvertes.fr/hal-00407662
DOI : 10.1016/j.margeo.2007.04.009

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
This study demonstrates that 20-100 GHz range can be used for spatially-accurate focusing of heating inside the skin achieved by varying frequency and exposure beam size, as well as by enforcing air convection. The latter is also used to reduce overheating of skin surface. Heating at different skin depths depending on these parameters is investigated in detail using the hybrid bio-heat equation. In particular, it is shown that decreasing frequency and/or increasing exposure beam size at forced airflow result in elevation of heating of deeper layers of tissue and decrease of skin surface temperature. Changes of water content within 15%, which exceed those due to aging and presence of tumors, only slightly affect heating. Exposure intensity necessary to reach a target temperature significantly increases in different areas of body with elevated blood flow. Dependence on exposure intensity and hyperthermia treatment duration is also investigated and discussed. Results of this study suggest that the lower part of the millimeter-wave range is an attractive alternative for non-invasive thermal treatment of skin cancer with a high spatial resolution. Bioelectromagnetics. 36:464-475, 2015. © 2015 Wiley Periodicals, Inc
ISSN: 0197-8462

hal-01187403
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01187403
DOI : 10.1002/bem.21929
PUBMED : 26179286

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The seismic anisotropy of the deep Earth is reviewed as a profile from the upper mantle to the solid inner core at the centre of the Earth. The upper mantle is by far the most anisotropic region of the Earth, followed the D” layer above the core mantle boundary. In contrast it is shown that many minerals that are present in the upper mantle, transition zone, lower mantle, D” layer and solid inner core are elastically anisotropic to different degrees. The anisotropy of hydrous phases present in subduction zones is briefly introduced. The basic concepts of single crystal and polycrystalline elasticity and the extrapolation of elastic properties to high temperature and pressure are presented. The specific features of elastic wave propagation in an anisotropic medium of any arbitrary symmetry are illustrated using mantle and inner core phases. The roles of crystal preferred orientation, water and melt in producing seismic anisotropy in the upper mantle are discussed.
Treatese of Geophysics, vol.2

hal-00408321
https://hal.archives-ouvertes.fr/hal-00408321
DOI : 10.1016/B978-044452748-6.00045-6