Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite-bearing crustal shear zones are exhumed extensions at depth of (potentially seismogenic) brittle faultsat shallow structural level. By concentrating deformation, shear zones play a major role in the rheology and mechanicalbehavior of the continental crust. Analysis of shear zone geometry and microstructures is a useful toolto decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of thedeformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However,only rare examples provide geochronological data that can be unambiguously linked with deformation. Thus,time-scales over which major mylonite zones develop and remain active under ductile conditions as well as theirstrain rates often remain poorly documented. Several sections across the South Armorican Shear Zone (SASZ),a crustal-scale, several km-thick dextral shear zone were investigated by structural, petrological and Ar/Ar radiochronologicalmethods. Finite strain profiles on these sections showed a strong deformation partitioning towardsthe ultramylonite core of the SASZ, with a decrease, of both the C’/S mean angle (from ca. 45 to less than5) and the Quartz grain-size (from ca. 150 to 5 m). In parallel, conventional and in-situ Ar/Ar datings on thefabric-forming white micas were performed on compositionally complex white-micas. Inherited magmatic muscovitescarried by the foliation and newly-formed, syn-tectonic substituted phengites located along the shear bandsyielded 2 age groups for the less deformed samples. Along the shear zone cross-section, the difference betweenthese two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, thevery fine-grained syn-tectonic phengites yielded the same ca. 300-298 Ma age irrespectively of their distance to thecore of the shear zone, even in slightly deformed rocks distant by several km. These results support a new modelof crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history, i.e.the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves withtime, with an increasingly larger fraction partitioned in the ultramylonitic core. Besides, combination of the finitestrain estimations and the Ar/Ar ages enables us to assess the range of strain rates associated with mylonitization.
EGU General Assembly 2014
Vienne, Austria

insu-01565057
https://hal-insu.archives-ouvertes.fr/insu-01565057

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : Elsevier Science Bv
Résumé : We present the results from a new grid of deep penetration multichannel seismic (MCS) profiles over the 280-km-long north-central segment of the Lesser Antilles subduction zone. The 14 dip-lines and 7 strike-lines image the topographical variations of (i) the subduction interplate décollement, (ii) the top of the arcward subducting Atlantic oceanic crust (TOC) under the huge accretionary wedge up to 7 km thick, and (iii) the trenchward dipping basement of the deeply buried forearc backstop of the Caribbean upper plate. The four northernmost long dip-lines of this new MCS grid reveal several-kilometres-high topographic variations of the TOC beneath the accretionary wedge offshore Guadeloupe and Antigua islands. They are located in the prolongation of those mapped on the Atlantic seafloor entering subduction, such as the Barracuda Ridge. This MCS grid also provides unexpected evidences on huge along-strike topographical variation of the backstop basement and of the deformation style affecting the outer forearc crust and sediments. Their mapping clearly indicates two principal areas of active deformation in the prolongation of the major Barracuda and Tiburon ridges and also other forearc basement highs that correspond to the prolongation of smaller oceanic basement highs recently mapped on the Atlantic seafloor. Although different in detail, the two main deforming forearc domains share similarities in style. The imaged deformation of the sedimentary stratification reveals a time- and space-dependent faulting by successive warping and unwarping, which deformation can be readily attributed to the forearc backstop sweeping over the two obliquely-oriented elongated and localized topographical ridges. The induced faulting producing vertical scarps in this transport does not require a regional arc-parallel extensional regime as proposed for the inner forearc domain, and may support a partitioned tectonic deformation such as in the case of an outer forearc sliver. A contrasted reflectivity of the sedimentary layering at the transition between the outer forearc and accretionary domains was resolved and used to define the seaward edge of the outer forearc basement interpreted as being possibly a proxy to the updip limit of the interplate seismogenic zone. Its mapping documents along-arc variations of some tens of kilometres the subduction backstop with respect to the negative gravity anomaly commonly taken as marking the subduction trench. With the exception of the southernmost part, the newly mapped updip limit reaches 25 km closer to the trench, thus indicating a possible wider seismogenic zone over almost the whole length of the study area.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-09 , Vol. 603 , P. 32-54

Droits : 2013 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00139/25003/23109.pdf
DOI:10.1016/j.tecto.2013.05.028
http://archimer.ifremer.fr/doc/00139/25003/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Jacupiranga Complex is one of several Meso-Cenozoic alkaline intrusive complexes along the margins of the intracratonic Paraná Basin in southern Brazil. The complex encompasses a wide range of rock-types, including dunites, wehrlites, clinopyroxenites, melteigites-ijolites, feldspar-bearing rocks (diorites, syenites, and monzonites), lamprophyres and apatite-rich carbonatites. While carbonatites have been extensively investigated over the last decades, little attention has been paid to the silicate rocks. This study presents new geochonological and geochemical data on the Jacupiranga Complex, with particular emphasis on the silicate lithotypes. 40Ar/39Ar ages for different lithotypes range from 133.7 ± 0.5 Ma to 131.4 ± 0.5 Ma, while monzonite zircon analyzed by SHRIMP yields a U-Pb concordia age of 134.9 ± 1.3 Ma. These ages indicate a narrow time frame for the Jacupiranga Complex emplacement, contemporaneous with the Paraná Magmatic Province. Most of the Jacupiranga rocks are SiO2-undersaturated, except for a quartz-normative monzonite. Based on geochemical compositions, the Jacupiranga silicate lithotypes may be separated into two magma-evolution trends: (1) a strongly silica-undersaturated series, comprising part of the clinopyroxenites and the ijolitic rocks, probably related to nephelinite melts and (2) a mildly silica-undersaturated series, related to basanite parental magmas and comprising the feldspar-bearing rocks, phonolites, lamprophyres, and part of the clinopyroxenites. Dunites and wehrlites are characterized by olivine compositionally restricted to the Fo83-84 interval and concentrations of CaO (0.13–0.54 wt%) and NiO (0.19–0.33 wt%) consistent with derivation by fractional crystallization, although it is not clear whether these rocks belong to the nephelinite or basanite series. Lamprophyre dikes within the complex are considered as good representatives of the basanite parental magma. Compositions of calculated melts in equilibrium with diopside cores from clinopyroxenites are quite similar to those of the lamprophyres, suggesting that at least a part of the clinopyroxenites is related to the basanite series. Some feldspar-bearing rocks (i.e. meladiorite and monzonite) show petrographic features and geochemical and isotope compositions indicative of crustal assimilation, although this may be relegated to a local process. Relatively high CaO/Al2O3 and La/Zr and low Ti/Eu ratios from the lamprophyres and calculated melts in equilibrium with cumulus clinopyroxene point to a lithospheric mantle metasomatized by CO2-rich fluids, suggesting vein-plus-wall-rock melting mechanisms. The chemical differences among those liquids are thought to reflect both variable contributions of melting resulting from veins and variable clinopyroxene/garnet proportions of the source.
ISSN: 0895-9811

hal-01583547
https://hal.archives-ouvertes.fr/hal-01583547
DOI : 10.1016/j.jsames.2017.05.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Major and trace element signatures and Sr-Nd-Pb isotope data for muscovite (Ms)-bearing amphibolite blocks and associated muscovite-bearing trondhjemite and quartz-muscovite rocks from the Sierra del Convento melange (eastern Cuba) indicate that Proto-Caribbean oceanic crust underwent wet partial melting processes during Mesozoic subduction and after accretion to the upper plate. Trace element normalized patterns of Ms-bearing amphibolites are enriched in light rare earth elements (LREE) and large-ion lithophile elements (LILE) and evidence variable trace element transfer from the Proto-Caribbean subducting slab to the mantle wedge. Ms-bearing trondhjemites show LREE enrichment and HREE depletion and have geochemical features similar to adakites, including SiO2>56 wt.%, high Na2O contents (5.5-9.0 wt.%) and high Sr/Y (16-644). We consider that the trondhjemites represent primary and natural melts formed by deep partial melting of the subducting slab which did not significantly react with the mantle wedge before intrusion in the subduction channel. The Ms-bearing trondhjemites show different geochemical and petrological signatures compared with the Ms-free tonalites-trondhjemites from Sierra del Convent, that are interpreted as primary slab melts. These differences support the idea that partial melting processes in the Sierra del Convento subduction channel were triggered by the infiltration of fluids derived from three distinct subducted sources: sediments, altered mid-ocean ridge basalts (MORB), and serpentinites. In this scenario, the pegmatitic quartz-muscovite rocks, which are highly enriched in LILE, probably represent the crystallization products of fluids derived by differentiation of the trondhjemitic melts.
ISSN: 0024-4937

hal-00669881
https://hal.archives-ouvertes.fr/hal-00669881
DOI : 10.1016/j.lithos.2011.07.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In East Asia, widespread extensional sedimentary basins together with the close association of Metamorphic Core Complexes and magmatism are prominent features of the large-scale wide rift system developed during late Mesozoic times. This region thus appears as a proper place to study continental extension as well as questions about the link between continental extension and magmatism. This paper primarily provides pioneer exhumation time-constraints on the Linglong MCC (Jiaodong Peninsula) including cooling and deformation ages. MCC cooling at mid-crustal levels occurred at ca. 143 Ma. Besides, last ductile deformation occurred at ca. 134 Ma while final exhumation stages, under brittle 2 conditions, occurred as late as ca. 128 Ma. Continuous crustal stretching were then recorded by the emplacement of a synkinematic pluton in the upper crust at ca. 128 Ma that cooled fast below an intracrustal shear zone crossing the ductile-brittle transition at ca. 123 Ma. The ca. 120-118 Ma age cluster is ascribed to the fast cooling of undeformed plutons marking the end of extension that lasted, in the area, over a minimum period of ca. 30 My. Combining other MCC exhumation constraints and the onset of subsidence in the sedimentary basins, total duration of late Mesozoic extension in East Asia could be estimated at ca. 60 My, related with a rather long process for extension from 160 to at least 100 Ma. East Asian continental extension is heterogeneously distributed in space and time as revealed by fundamental differences between two end-member classes of migmatite-cored MCC already described in other wide rift systems. Extension seems to have first favoured partial melting which subsequently, in turn, maintained continental extension.
ISSN: 1342-937X

insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551/document
https://hal-insu.archives-ouvertes.fr/insu-00752551/file/Charles_et_al_Gondwana_Research_2012.pdf
DOI : 10.1016/j.gr.2012.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mid-ocean ridge basalts (MORBs) are the most abundant magmas produced on Earth. They are widely studied to infer mantle compositions and melting processes. However, MORB liquids are also the complex end-product of a variety of intra-crustal processes such as partial or fractional crystallization, melt–rock interaction, and contamination. Deciphering the relative contribution of these different processes is of first-order importance. Contamination at ocean crustal levels is likely, and may occur at magma chamber margins where fresh magmas can interact with previously hydrothermally altered rocks. Characterizing the composition of this crustal contaminant component is critical if we are to understand the relative importance of each component in the resulting MORB liquid.Here we present the results of experiments designed to reproduce the processes occurring at oceanic magma chamber roofs, where crustal contamination should be most extensive, by melting a representative sample of the sheeted dike complex. Anatectic melts thus produced are likely to represent the principal crustal contaminant in MORB. These melts were characterized for major and trace elements, showing B, Zr, Hf, and U enrichment, and Sr, Ti, and V depletion relative to original MORB liquids. In comparison to the starting material, relative element fractionations are observed in the anatectic melts, with enrichments of: U relative to Ba, Nb, and Th; LREE and MREE relative to Sr; and Zr–Hf relative to LREE. Bulk partition coefficients for element partitioning during magma chamber roof anatexis are derived and proposed as valuable tools for tracking MORB contamination.Comparison with natural samples from the East Pacific Rise and the Oman ophiolite shows that anatectic melts can crystallize in situ to form oceanic plagiogranite intrusions, and that residual assemblages associated with the hydrous partial melting stage are represented by hornfelsic dikes and enclaves (also named granoblastic basalts). We now recognize these as commonplace at the root of the sheeted dike complex both at present-day and fossil oceanic spreading centers.
ISSN: 0024-4937

hal-01115500
https://hal.archives-ouvertes.fr/hal-01115500
DOI : 10.1016/j.lithos.2014.05.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : Differentiation of the Earth's mantle and formation of continental and oceanic crust occur principally through partial melting and extraction of basaltic melt. Among the mantle rocks occurring at the Earth's surface, as tectonically-emplaced massifs, abyssal peridotites or xenoliths, the harzburgites (< 5% clinopyroxene) are widely considered as refractory mantle residues left after extraction of a basaltic component. In contrast, the most fertile lherzolites (15% clinopyroxene) are generally regarded as pristine mantle, only weakly affected by partial melting. In this paper we present new convergent structural and geochemical data from the Lherz massif, the type-locality of lherzolite, indicating that the lherzolites from Lherz do not represent pristine mantle. Detailed structural mapping clearly shows that the lherzolites are secondary rocks formed at the expense of the harzburgites. Variations of major, minor and trace elements through the harzburgite–lherzolite contacts indicate that the lherzolites were formed through a refertilization process involving interaction of refractory, lithospheric mantle with upwelling asthenospheric partial melts. Combined with previously published indications of refertilization in orogenic peridotites, our new observations in Lherz suggest that most lherzolite massifs represent secondary (refertilized) rather than pristine mantle. Together with geochemical data on mantle xenoliths, this indicates that melt transport and melt-rock reaction play a key role on the rejuvenation and erosion of the lithospheric mantle.
ISSN: 0012-821X

hal-00406433
https://hal.archives-ouvertes.fr/hal-00406433
DOI : 10.1016/j.epsl.2007.05.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The In Ouzzal terrane in western Hoggar (Southern Algeria) preserves evidence of ultrahigh temperature (UHT) crustal metamorphism. It consists in Archean crustal units, composed of orthogneissic domes and greenstone belts, strongly remobilized during the Paleoproterozoic orogeny which was recognized as an UHT event (peak T > 1000 °C and P ≈ 9–12 kbar). This metamorphism was essentially defined locally in Al-Mg granulites, Al-Fe granulites and quartzites outcropping in the Northern part of the In Ouzzal terrane (IOT).In order to test and verify the regional spread of the UHT metamorphism in this terrane, ternary feldspar thermometry on varied rock types (Metanorite, Granulite Al-Mg and Orthogneiss) and samples that crop out in different zones of the In Ouzzal terrane. These rocks contain either perthitic, antiperthitic or mesoperthitic parageneses. Ternary feldspars used in this study have clearly a metamorphic origin.The obtained results combined with previous works show that this UHT metamorphism (>900 °C) affected the whole In Ouzzal crustal block. This is of major importance as for future discussion on the geodynamic context responsible for this regional UHT metamorphism.
ISSN: 0899-5362

hal-01526950
https://hal.archives-ouvertes.fr/hal-01526950
DOI : 10.1016/j.jafrearsci.2016.08.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system during Miocene and Pliocene times. Rifting of the southern Tyrrhenian Sea started first along the Eastern Sardinian margin during the middle to late Miocene times, including the Messinian. The "METYSS" project aims at better constraining the relationships between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The "METYSS 1" cruise (2009) allowed to acquire about 1200 km of HR seismic-reflection profiles along the Eastern Sardinian margin, Western Tyrrhenian Sea. This data set clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt. The highly variable thickness of the small confined salt basins may be related to the initial pre-Messinian basin geometry, to the fact that salt deposition was syn-rift or to salt movement. Southeastward, salt tectonics is vigorous in unconfined basins and appears to have started early during the UU deposition. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time, as shown by bathymetric scarps and associated debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian salt.
ISSN: 0040-1951

hal-00996665
https://hal.archives-ouvertes.fr/hal-00996665
DOI : 10.1016/j.tecto.2013.12.015

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
his study describes the structural setting, petrogenesis, and geochronology of a suite of acidic magmatic rocks that are intruded in the metamorphic core of the Tertiary ophiolitic suture zone of the Sabzevar Range, NE central Iran. These intrusive bodies show tabular geometries with solid-state fabrics documenting syntectonic emplacement during crustal shortening. In the total alkalis-silica (TAS) diagram, their compositions define a medium-K calc-alkaline suite, spanning from basaltic andesite to the dacite and rhyolite fields. They show characteristic low MgO (0.15–0.60 wt%) and Ni (<20 ppm), high Sr contents, a negligible Eu anomaly, and extremely fractionated rare earth element (REEs), with high La/Yb and Sr/Y (up to 900) ratios, but very low Yb and Y contents. They also show zircon Hf isotope compositions compatible with a mid-ocean-ridge basalt (MORB)–type oceanic crust. Inverse and forward thermobarometry constrains conditions of magma crystallization in the upper-pressure field of the amphibolite facies (ca. 1.2–1.5 GPa and 750 °C). Integrated U-Pb zircon and 40Ar/39Ar white mica and amphibole geochronology constrains the Sabzevar magmatism to the late Paleocene (at ca. 58 Ma). Genesis of the Sabzevar magmatic suite is interpreted in terms of prograde, wet amphibolite melting during oceanic subduction, within a pressure-temperature range between a plagioclase-out and a hornblende-out boundary. Magma differentiation and high-pressure amphibole fractionation of pristine slab melts are proposed as the dominant factors that imparted the adakite signature in the Sabzevar structural zone. Implications in terms of the regional tectonic scenario are discussed and framed within the advancing and retreating evolution of the Neotethyan subduction during the Mesozoic–Tertiary time span.
ISSN: 0016-7606

hal-01122824
https://hal.archives-ouvertes.fr/hal-01122824
DOI : 10.1130/B30913.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy originating within the continental crust is used to determine kinematic flow lines within active mountain belts and is widely attributed to regionally aligned mica. However, naturally deformed micaceous rocks commonly show composite (e.g. S-C) fabrics. It is necessary therefore to understand how both varying mica content and differing intensities of multiple foliations impact on seismic interpretations in terms of deformation fields. An outcrop analogue for granitic mid-crustal deformed zones is used here to calibrate the seismic response against both parameters. Seismic responses are modelled using crystallographic preferred orientations for polymineralic, micaceous granitic gneisses, measured using Electron Back-Scatter Diffraction. The sample results are generalised by modelling the effects of variations in modal composition and the relative importance of deformation fabrics of variable orientation, so-called rock and fabric recipes. The maximum P- and S-anisotropy are calculated at 16.6% and 23.9% for single-foliation gneisses but for mixed (i.e. S-C) foliation gneisses these values reduce to 5.8% and 7.5% respectively. Furthermore, mixtures of multiple foliations generate significant variations in the geometry of the seismic anisotropy. This effect, coupled with the geographical orientation of fabrics in nature. can generate substantial variations in the orientation and magnitude of seismic anisotropy (especially for shear waves) as measured for the continental crust using existing receiver function and teleseismic near-vertical incidence methods. Thus, maps of seismic anisotropy varying with depth in deforming continents need not imply necessarily depth-varying deformation kinematics and tectonic decoupling.
ISSN: 0012-821X

hal-00445247
https://hal.archives-ouvertes.fr/hal-00445247
DOI : 10.1016/j.epsl.2009.09.035

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Generation and emplacement of felsic magmas in the Paleoproterozoic Baoulé-Mossi domain, West African Craton does not match the apparent peaks of global crust generation identified between ca. 2900–2600, 1900–1600 and 1200–900 Ma. In contrast, across the Baoulé-Mossi domain, the emplacement of felsic intrusions ranges from ca. 2300 to 2000 Ma. It has proven difficult to place this magmatism within a robust geodynamic framework due to the lack of accurate geochronological data from across the West African Craton. The present study addresses this issue by presenting eighty-four new felsic intrusions zircon ion microprobe and LA-ICP-MS U-Pb ages from areas that up until now have not been targeted for geochronology. The new dataset, when fully integrated with existing age data, reveals a craton-wide diachronous geochronological pattern characterized by a magmatic front that migrated westward. This migration proceeded at a rate of 35 km per million years, with an apparent offset of the initiation and cessation of felsic magmatic activity between the east and west of approximately 50 million years. The new data also show that although the entire Baoulé-Mossi domain was subject to continuous magmatic activity for at least 150 million years, this magmatic activity displays a rather different record in the eastern and western portions of the domain. The differences are expressed as a westward migration of the magmatic activity, cessation of activity around ca. 2100 Ma (easternmost portion) and ca. 2050 Ma (westernmost portion) and a higher incidence of inherited ages in the westernmost portion when compared to the easternmost region. In addition, the new U-Pb data identify some of the oldest felsic intrusions in the region, including a granite from Burkina Faso (2265 ± 17 Ma) and a diorite porphyry (2216 ± 5 Ma) in southern Mali. This study also reveals inherited Archean zircon cores from across southern Mali. The combination of the new data presented here, along with previously published data, suggests that the Baoulé-Mossi domain formed from the accretion of two major crustal blocks. The Archean inherited ages open a window for further investigation of the interaction between the Archean Kénéma-Man and the Paleoproterozoic Baoulé-Mossi domains.
ISSN: 0301-9268

hal-01623272
https://hal.archives-ouvertes.fr/hal-01623272
DOI : 10.1016/j.precamres.2017.07.036

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use velocities from 65 continuous stations and 31 survey-mode GPS sites as well as kinematic modeling to investigate present day deformation along the Africa-Iberia plate boundary zone in the western Mediterranean region. The GPS velocity field shows southwestward motion of the central part of the Rif Mountains in northern Morocco with respect to Africa varying between 3.5 and 4.0 mm/yr, consistent with prior published results. Stations in the southwestern part of the Betic Mountains of southern Spain move west-southwest with respect to Eurasia (similar to 2-3 mm/yr). The western component of Betics motion is consistent with partial transfer of Nubia-Eurasia plate motion into the southern Betics. The southward component of Betics motion with respect to Iberia is kinematically consistent with south to southwest motion of the Rif Mountains with respect to Africa. We use block modeling, constrained by mapped surface faults and seismicity to estimate the geometry and rates of strain accumulation on plate boundary structures. Our preferred plate boundary geometry includes one block between Iberia and Africa including the SW Betics, Alboran Sea, and central Rif. This geometry provides a good fit to the observed motions, suggesting a wide transpressive boundary in the westernmost Mediterranean, with deformation mainly accommodated by the Gloria-Azores fault system to the West and the Rif-Tell lineament to the East. Block boundaries encompass aspects of earlier interpretations suggesting three main deformation styles: (i) extension along the NE-SW trending Trans-Alboran shear zone, (ii) dextral strike-slip in the Betics corresponding to a well defined E-W seismic lineament, and (iii) right lateral strike-slip motion extending West to the Azores and right-lateral motion with compression extending East along the Algerian Tell. We interpret differential motion in the Rif-Alboran-Betic system to be driven both by surface processes related the Africa-Eurasia oblique convergence and sub-crustal dynamic processes associated with the long history of subduction of the Neotethys ocean lithosphere. The dextral slip identified in the Betic Mountains in Southern Spain may be related to the offshore fault that produced the Great 1755 Lisbon Earthquake, and as such may represent a significant seismic hazard for the West Mediterranean region.
ISSN: 0012-821X

hal-00618337
https://hal.archives-ouvertes.fr/hal-00618337
DOI : 10.1016/j.epsl.2011.05.048

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7