Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
ISSN: 0956-540X

hal-00789114
https://hal.archives-ouvertes.fr/hal-00789114
DOI : 10.1093/gji/ggs085

Éditeur(s) : HAL CCSD
Résumé : The method of shear-wave splitting provides a unique possibility to identify seismic anisotropy, which is a result of the preferred orientations of the anisotropic minerals by deformation. The novel software SplitLab, presented in this thesis, simplifies the data processing. The comparison of three independent techniques makes it possible to associate an objective quality to the results and also to define a criterion to automatically detect events without splitting (“Nulls”). This criterion is applied to shear-wave splitting measurements at 16 stations located on the East European Craton. The results indicate that the fast directions reflect the ancient blocks, which constitute the East European Craton. The fast directions in south-west are aligned with the margin of the craton and continue the general tendency of offcraton stations. The stations in the Ural foredeep show fast directions perpendicular to the general tendency of the mountain chain. Various indicators give reason to assume lithospheric origins of anisotropy
La mesure du déphasage des ondes de cisaillement offre la possibilité de caractériser l'anisotropie sismique présente dans les différentes couches de la Terre, qui résulte généralement des orientations préférentielles des minéraux anisotropes induites par la déformation. Le nouveau logiciel SplitLab présenté dans cette thèse, simplifie le traitement des données depuis la requête des données jusqu'à la masure de déphasage et l'interprétation des résultats. La comparaison de trois techniques indépendantes pour mesurer ce déphasage permet de quantifier la qualité des résultats et de détecter automatiquement les mesures sans déphasage apparent. Ce critère est appliqué aux mesures de déphasages des ondes SKS enregistrées en 16 stations situées sur le Craton Est Européen. Les résultats indiquent que les directions rapides reflètent les structures anciennes, qui constituent le Craton Est Européen. En outre, les directions rapides dans le Sud-ouest s'alignent avec la bordure du craton et sont en continuité avec la tendance générale définie par les stations éloignées du Craton. Les stations dans les unités externes de l'Oural montrent des directions rapides perpendiculaires à la tendance générale de la chaîne de montagne.
https://tel.archives-ouvertes.fr/tel-00539114

tel-00539114
https://tel.archives-ouvertes.fr/tel-00539114
https://tel.archives-ouvertes.fr/tel-00539114/document
https://tel.archives-ouvertes.fr/tel-00539114/file/thesewustefeld.pdf

Éditeur(s) : HAL CCSD
Résumé : At present, the forecasting of littoral evolution presents a considerable social stake. Many studies have been achieved to better understand coastal dynamics. Such dynamics are controlled by morphology, sediment supply, hydrodynamics, eustacy... at different time scales. At geological time scale, deposits geometry, controlled by eustacy and subsidence, is succesfully analysed where sediment supply is high. But the littoral zones present important sediment supply variability. In low sediment supply areas, the record of coastal tracts is smaller and harder to interprete. Analyses of about 250 kilometres of new VHR seismic profiles acquired along the languedocian coast (Northern Gulf of Lion, France), tens of short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal tracts from Quaternary to present-day. This highlighted the role of alongshore dynamics in coast where direct sediment supply is low. The concepts of protected lagoon and isolated lagoon were broughted to the fore and the effect of inherited incised valley morphology was discussed. Last, a complementary study by analogue modeling of the channel incision processes controled by eustatic and climatic changes allowed to discuss the role of incised valleys in coastal areas.
Actuellement, la prévision de l'évolution d'un système littoral représente un enjeu social important. De nombreuses études sont réalisées afin de mieux connaitre la dynamique côtière et donc de comprendre les facteurs qui influencent son évolution. Cette dynamique est contrôlée par la morphologie, les apports sédimentaires, l'hydrodynamique, l'eustatisme... qui agissent à des échelles de temps différentes et avec de fortes interactions. A l'échelle géologique, l'architecture des dépôts, contrôlée par l'eustatisme et la subsidence, est parfaitement décrite dans les zones à forts apports sédimentaires. Par contre, dans les zones à faibles apports sédimentaires, l'enregistrement des cortèges côtiers est réduit et est difficile à interpréter. L'analyse de 250 kilomètres de profils sismiques THR sur le littoral languedocien (Nord du Golfe du Lion, France), de carottages et de données de terrain a permis de déterminer la géométrie en trois dimensions des cortèges sédimentaires côtiers depuis le Quaternaire jusqu'à l'actuel. Ces observations montrent l'importance de la dynamique longshore sur les littoraux pauvres en apports sédimentaires directs. De plus, l'étude d'un système lagunaire sur ce littoral met en évidence les concepts de lagunes protégées et lagunes isolées ainsi que l'importance des vallées incisées dans la génèse de ces environnements. Enfin, la modélisation en laboratoire des processus d'incision de chenaux sous contrôle eustatique et climatique permet de discuter le rôle des vallées incisées en milieu côtier.
https://tel.archives-ouvertes.fr/tel-00542897

tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897/document
https://tel.archives-ouvertes.fr/tel-00542897/file/theseraynaldef.pdf

Éditeur(s) : HAL CCSD Dunod
Résumé : Cet ouvrage présente les différents séismes et les origines des soubresauts de la Terre. La sismotectonique est également étudiée : pourquoi, quand et comment se produit la rupture. Chaque faille révèle une histoire (archéosismicité, palésoisismicité, néotectonique) que le géologue, l'architecte et l'urbaniste doivent connaître pour mieux appréhender le risque sismique. Ainsi, les méthodes et les techniques utilisées pour mesurer un risque sismique et le prévenir sont largement étudiées. Le cours fait référence à de nombreux exemples sous la forme d'encarts. Des exercices corrigés permettent à l'étudiant de mettre en oeuvre ses connaissances
https://hal.archives-ouvertes.fr/hal-00408297

hal-00408297
https://hal.archives-ouvertes.fr/hal-00408297

Éditeur(s) : HAL CCSD
Résumé : Annual report
We present here the results of CRS reprocessing of a 3D real dataset acquired in 2001 on the Tournemire site in France, which is an experimental site for the Institut de Radioprotection et de Sûreté Nucléaire (IRSN) to test geophysical imaging process in the context of geological nuclear waste storage. The main objective was to evaluate the ability of the methodology to recognize, in the carbonate cover of the experimental site clay layer, the prolongation of weak vertical-displacement faults seen in a tunnel within that clay layer. Previous seismic processing using the conventional common midpoint (CMP) approach did not provide satisfactory results in this cover, although the fault has beenrecognized in the carbonates underlying the clay layer. An original strategy was elaborated to define the best-possible parameters of the 3D Common-Reflection-Surface (CRS) stack. The procedure in- cluded refining the velocity search along a velocity guide, using a first CRS stack as the base of a subsequent curvature-parameter search, or a parameter smoothing before stacking. An optimal ap- proach was elaborated on a subset of the data, and furthermore applied to the whole dataset. The resulting image shows improved event continuity in the carbonate cover, which allowed for horizon picking after depth migration, as well as the estimation of post-stack geometrical attributes, such as coherency. The processing indicates a zone of degraded quality of reflection events lying in the N-S direction, above the known fault zone within the underlying formations. Such feature corresponds to an alteration zone at the earth surface. Further investigation at a higher resolution scale is planned to confirm whether this zone could be a spot of possible leakage
https://hal.archives-ouvertes.fr/hal-00857376

hal-00857376
https://hal.archives-ouvertes.fr/hal-00857376

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Despite convergent margins being unstable systems, most reports of huge submarine slope failure have come from oceanic volcanoes and passive margins. Swath bathymetry and seismic profiles of the northern Hikurangi subduction system, New Zealand, show a tapering 65-30 km wide by 65 km deep margin indentation, with a giant, 3150+_630 km 3, blocky, debris avalanche deposit projecting 40 km out across horizontal trench fill, and a debris flow deposit projecting over 100 km. Slide blocks are well-bedded, up to 18 km across and 1.2 km high, the largest being at the avalanche deposit's leading edge. Samples dredged from them are mainly Miocene shelf calc-mudstones similar to those outcropping around the indentation. Cores from cover beds suggest that failure occurred-170 +_40 ka, possibly synchronously with a major extension collapse in the upper indentation. However, the northern part of the indentation is much older. The steep, straight northern wall is close to the direction of plate convergence and probably formed around 2.0-0.16 Ma as a large seamount subducted, leaving in its wake a deep groove obliquely across the margin and an unstable triangle of fractured rock in the 60 ø angle between groove and oversteepened margin front. The triangle collapsed as a blocky avalanche, leaving a scalloped southern wall and probably causing a large tsunami. Tentative calculations of compacted volumes suggest that the indentation is over 600 km 3 larger than the avalanche, supporting a two-stage origin that includes subduction erosion. Since failure, convergence has carried the deposits-9 km back toward the margin, causing internal compression. The eventual subduction/accretion of the Ruatoria avalanche explains the scarcity of such features on active margins and perhaps the nature of olistostromes in fold belts.
ISSN: 2169-9275

hal-01261406
https://hal.archives-ouvertes.fr/hal-01261406
https://hal.archives-ouvertes.fr/hal-01261406/document
https://hal.archives-ouvertes.fr/hal-01261406/file/CollotJGR2001.pdf
DOI : 10.1029/2001JB900004

Éditeur(s) : HAL CCSD
Résumé : In this work on a complete transect of the west‐central Pyrenees, we combine low temperature thermochronology (apatite fission tracks, AFT) with a detailed structural analysis to describe vertical movements related to the thrusting system evolution, and to determine the influence of the latter on the sedimentation/burial/exhumation cycle of thesynorogenic deposits of the southern foreland basin (Jaca and Ainsa basins). AFT analysis from a transect of the south‐Pyrenean basin show the southward decrease of the fission track reset level from the southern edge of the Axial Zone to the South‐Pyreneanfrontal thrust, implying the southwards decrease of the burial amount from more than 5kmin the north to less than 3km in the south assuming an average geothermal gradient of 25°C.km‐1. The structural setting of the Jaca basin attests that the burial of the synorogenicsediments was mainly due to the sedimentary accumulation. AFT data from the northernpart of the basin display a late Oligocene‐early (middle) Miocene cooling event. Newinterpretation of industrial seismic reflection profiles across the Jaca basin suggests that the Oturia thrust is rooted in the Bielsa basement thrust, responsible for the early (‐middle) Miocene out‐of‐sequence tectonic reactivation of the southern flank of the Axial Zone (Jolivet et al., 2007). These results reveal a lower Miocene (Burdigalian ‐?Langhian) out‐of sequence episode of tectonic activity of the interior of the south‐Pyrenean foreland basin. AFT data from the Axial Zone and the North‐Pyrenean Zone confirm the general southwardmigration of the thrusting system, and also bring evidence of the late Oligocene‐lowe rMiocene out‐of‐sequence tectonic reactivation of the northern flank of the Axial Zone. All these results attest of a late Oligocene‐lower Miocene (Burdigalian‐?Langhian) "pop‐up" reactivation of the inner part of the west‐central Pyrenees, younger than the sealing of thesouth‐Pyrenean front (Aquitanian‐?Burdigalian) which is classically considered to mark the end of the Pyrenean compression. These results lead us to propose a new crustal scale evolution model of the west‐central Pyrenees in 3 stages: (i) From the Late Cretaceous to themiddle Eocene, the orogenic prism is characterised by the absence of relief, related to theinversion of Cretaceous extensional structures leading to the accretion of thin crustal units; (ii) The late Eocene‐Oligocene stage corresponds to the continental collision, marked by the creation of important relief associated with the accretion of thick crustal units; (iii) During the early Miocene, the inner part of the Pyrenean wedge is tectonically reactivated.
Ce travail de thèse concerne une transversale complète des Pyrénées centro-occidentales, où on a combiné la thermochronologie basse température (traces de fission sur apatites, TFA) avec une analyse structurale détaillée pour décrire les mouvements verticaux associés à l'évolution du système chevauchant, et pour déterminer l'influence de ce dernier sur le cycle sédimentation/enfouissement/exhumation des dépôts synorogéniques du bassin d'avant‐chaine sud (bassins de Jaca et Ainsa). L'analyse TFA complète les données déjà publiées dans la Zone Axiale et la Zone Nord‐Pyrénéenne, e tconstitue la première étude de ce genre dans un bassin d'avant‐chaîne pyrénéen. Les données TFA sur la transversale du bassin sud‐pyrénéen montrent une diminution vers le sud du degré d'effacement des traces de fission, traduisant la diminution vers le sud de la quantité d'enfouissement, supérieure à 5 km au nord et inférieure à 3 km au sud dans l'hypothèse un géotherme de 25°.km‐1. Le contexte géologique montre que l'enfouissement est principalement lié à l'accumulation des dépôts synorogéniques. Les données TFA de lapartie nord du bassin montrent un refroidissement d'âge Oligocène supérieur‐Miocèneinferieur (moyen). Par ailleurs, une nouvelle interprétation de profils de sismiques réflexiondans le bassin de Jaca montre que le chevauchement d'Oturia s'enracine dans lechevauchement de socle de Bielsa, responsable de l'exhumation tectonique hors‐séquencedu bord sud de la Zone Axiale au Miocène inférieur (‐moyen) (Jolivet et al., 2007). Cesrésultats attestent donc de l'exhumation tectonique hors‐séquence au Miocène inférieur (Burdigalien‐ ?Langhien) de la partie nord du bassin d'avant‐chaine sud‐pyrénéen. Des données TFA obtenues dans la Zone Axiale et la Zone Nord‐Pyrénéenne confirment lamigration générale vers le sud du système chevauchant, et mettent également en évidencela réactivation tectonique hors‐séquence du bord nord de la Zone Axiale à l'Oligocèneterminal‐Miocène inférieur. L'ensemble de ces résultats atteste donc de la réactivation en " pop‐up " de la parties interne des Pyrénées centre‐ouest à l'Oligocène supérieur‐Miocèneinférieur (Burdigalien‐ ?Langhien), postérieurement au scellement du front sud‐pyrénéen (Aquitanien‐ ?Burdigalien) classiquement considéré comme marquant la fin de lacompression pyrénéenne. Ces données nous ont permis de proposer un nouveau modèle d'évolution crustale des Pyrénées centro‐occidentales en 3 grandes étapes : (i) du Crétacé supérieur à l'Eocène moyen, le prisme est caractérisé par une absence de relief, en lien avec l'inversion de structures extensives crétacées conduisant à l'accrétion de petites écailles crustales ; (ii) la période Eocène supérieur‐Oligocène correspond à la collision continentale proprement dite, et est marquée par la création d'importants reliefs associés à l'accrétion d'épaisses unités crustales ; (iii) au Miocène inférieur, la partie interne du prisme pyrénéen est réactivée.
https://tel.archives-ouvertes.fr/tel-00772154

Droits : info:eu-repo/semantics/OpenAccess
tel-00772154
https://tel.archives-ouvertes.fr/tel-00772154
https://tel.archives-ouvertes.fr/tel-00772154/document
https://tel.archives-ouvertes.fr/tel-00772154/file/thesemeresse.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Splitting of teleseismic shear waves has been measured in the Appalachians (eastern USA) and the Pyrenees (western Europe) using data recorded by permanent and portable stations. From a comparison of the results, it appears that an interpretation of the recorded seismic anisotropy in terms of geodynamics is not straightforward. Successive geodynamic events have generated structures that may have resulted in a similar pattern of mantle flow and that therefore may have contributed in the development of the recorded anisotropy. Combining geological and geophysical arguments, it appears that the mantle anisotropy measured across the Appalachians and the Pyrenees may not be systematically Appalachian or Pyrenean in age but may be mainly due to a lithospheric structure formed during earlier major tectonic events, i.e. the Grenvillian and the Hercynian orogenies, respectively. We suggest that during major episodes of continent assembly, a pervasive tectonic fabric is developed in the lithospheric mantle. In the subsequent evolution of the continent, this fabric may induce a significant mechanical anisotropy that will drastically influence the mechanical behaviour of the Iithosphere when submitted to new tectonic events.
ISSN: 0031-9201

hal-01389717
http://hal.univ-reunion.fr/hal-01389717
http://hal.univ-reunion.fr/hal-01389717/document
http://hal.univ-reunion.fr/hal-01389717/file/Vauchez_Barruol-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03125-1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The 856 A.D. Qumis earthquake (M7.9) is the most destructive earthquake to have occurred in Iran, killing more than 200,000 people and destroying the cities of Damghan and the old Parthian capital of Shahr-i Qumis (Hecatompylos). This study combines evidence of historical seismicity with observations of the geomorphology and paleoseismology to provide the first detailed description of active faulting in the Damghan region of the east Alborz mountains, Iran. Regional left-lateral shear is accommodated on the Astaneh, Damghan, and North Damghan faults. Quaternary alluvial fans have been displaced along the Astaneh fault, with 15–20 m stream offsets recording the cumulative displacement over the last two to five earthquakes. A paleoseismology study from a single trench along a 5–10 km segment of the Astaneh fault reveals a rupture prior to 1300 A.D. and significantly later than 600 B.C. Despite the limitations of a single trench in documenting the spatial and temporal evolution of the fault over the late Quaternary, we are nevertheless able to bracket the last event to a time period consistent with the 856 A.D. earthquake. Two older earthquakes were also identified during the Holocene occurring between 600 B.C. and 4600 B.C. and between 4600 B.C. and 9600 B.C. The location of our trench within a bend on the Astaneh fault, which could act as a barrier to rupture propagation, means the three earthquakes recovered from our trench over the Holocene may represent a minimum. Further trenching will reveal how the Astaneh fault ruptures over repeated earthquakes and, consequently, the magnitude and extent of slip during the 856 A.D. earthquake.
ISSN: 0148-0227

hal-00551330
https://hal.archives-ouvertes.fr/hal-00551330
https://hal.archives-ouvertes.fr/hal-00551330v2/document
https://hal.archives-ouvertes.fr/hal-00551330/file/Hollingsworth2010.pdf
DOI : 10.1029/2009JB007185

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
P>The Strait of Hormuz area is a transition zone between the continental collision of the Zagros (west) and the subduction of an oceanic part of the Arabian Plate beneath the Makran wedge (east). Geology and recent GPS measurements indicate that about 15 mm yr-1 of relative motion in N10 degrees E direction is accommodated by two major fault systems: (1) the NNW-trending Minab-Zendan-Palami (MZP) fault system that connects the Main Zagros Thrust (MZT) to the inner Makran thrust system and the Frontal subduction thrust and (2) the N-trending Sabzevaran-Kahnuj-Jiroft (SKJ) fault system that bounds the Jazmurian depression to the west. We use dense GPS measurements along four transects across these fault systems in order to determine the strains spatial distribution. The northern GPS transect confirms the total fault slip rates for both fault systems estimated by the tectonic analyses (about 10 and 7.3 mm yr-1 in N10 degrees direction across the MZP and SKJ fault systems, respectively). For both fault systems, the elastic deformation spreads over shear zones that are several tens of kilometres wide. However, transects located close to latitude 27 degrees N reveal a much narrower shear zone (similar to 10 km) for the MZP fault system. Moreover, we confirm that most of the present-day strain is transferred towards the frontal subduction thrust rather than towards the inner Makran thrusts. In order to complement this new GPS velocity field with spatially dense measurements, we processed a set of ERS radar images by the radar interferometry (InSAR) technique. We used both a 'stacking' and a 'persistant-scatterers' approach to differentiate the ground deformation signal which spatial gradient is expected to be very low, from the atmospheric signal. Results from these interferograms appear to be relatively in agreement with the GPS-determined strain distribution. Nevertheless, they confirm the absence of any superficial creep behaviour since no sharp discontinuity on interferometric phase can be noted on any interferogram. Finally, we use a purely kinematic 'block model' inversion process to calculate slip rates and locking depths for each fault system from our GPS measurements. These models suggest that the relative quiescence over the last 200 yr has certainly produced a slip deficit as high as 2 m. So, we may wonder if the MZP fault system is not late in the interseismic phase of its earthquake cycle.
ISSN: 0956-540X

hal-00429386
https://hal.archives-ouvertes.fr/hal-00429386
DOI : 10.1111/j.1365-246X.2009.04321.x

Éditeur(s) : HAL CCSD
Résumé : Poster
We deployed a temporary local seismic network in the North Tanzanian Divergence (NTD) for 6 months in 2007 (35 stations, SEISMOTANZ'07 experiment). The region is characterized by major changes in the magmatic/tectonic nature of the rift, at the place where the eastern branch of the East African Rift enters the Tanzanian craton. More than 200 earthquakes were accurately located south of Lake Manyara.
Iceland in the Central Northern Atlantic : hotspot, sea currents and climate change
Plouzané, France

hal-00482059
http://hal.univ-brest.fr/hal-00482059
http://hal.univ-brest.fr/hal-00482059/document
http://hal.univ-brest.fr/hal-00482059/file/poster_albaric.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the evolution of concepts on and methods of estimating the state of stress from fault movements. Theories of failure in isotropic materials suggested a simple geometrical construction of optimal principal stress directions from a fault plane and its associated slip. These optimal directions align shear stress and slip directions and maximize the difference between shear stress and frictional resistance on the fault plane. Optimal stress directions for calcite twinning are obtained by a similar construction, with the difference that they maximize shear stress. Force representation of seismic sources independently introduced pressure, P, and tension, T, axes at positions that also maximize shear stress on both nodal planes. Frictional slip theory and the constraint that slip and shear stress directions be parallel allowed to address reactivation of pre-existing faults. This suggested that stress could also be inverted from reactivated fault and slip data or earthquake focal mechanisms. Early methods relied on geometrical constructions as a substitute for calculations, whereas later methods relied on software as these calculations became tractable with the help of computers. Similar methods were developed for the inversion of stress from crystal twin gliding with non-optimal geometry, with a different criterion that relies on a threshold of the component of shear stress along the gliding line. Even though these methods seek a common stress tensor compatible with fault and slip data, their main use is to separate polyphase data into homogeneous subsets and help deciphering complex tectonic histories. Fault and slip data can also be analyzed to constrain the strain rather than the stress tensor. In most cases this involves a summation and yields an average strain for the considered rock volume. Stress inversion thus appears better suited for differentiating heterogeneous data whereas strain analysis appears better suited for homogenizing them.
ISSN: 0040-1951

hal-00759043
https://hal.archives-ouvertes.fr/hal-00759043
DOI : 10.1016/j.tecto.2012.02.009

Éditeur(s) : HAL CCSD Université des Antilles
Résumé : International audience
Les quarante-quatre jours de conflits, de grèves, de manifestations, et de blocages économiquesà l’initiative du collectif guadeloupéen « Liyannaj Kont Pwofitasyon » (LKP) qui ont marquéles opinions sont le reflet des crises sociales, économiques, voire politiques et identitairesCrises et conflits dans les territoires insulaires de la Caraïbe et de l’Océan Indien (20 (...) 3Études caribéennes, 17 | Décembre 2010qui secouent les Départements et Régions d’Outre-Mer mais aussi de nombreux territoiresinsulaires. En Guadeloupe, au cours de cette mobilisation d’envergure, des dizaines de milliersde manifestants organisés derrière le collectif LKP regroupant près de cinquante organisationsculturelles, politiques et syndicales, ont revendiqué une hausse du pouvoir d’achat avec pourleitmotive la lutte contre « la vie chère ». Ces crises qui impactent les territoires insulairesont souvent une cause lointaine, globale, multiforme. D’autres ont participé activement audéclenchement de cette crise mondiale, notamment certains paradis fiscaux à l’origine de lafaillite des subprimes.
ISSN: 1779-0980

hal-01203236
https://hal.archives-ouvertes.fr/hal-01203236
https://hal.archives-ouvertes.fr/hal-01203236/document
https://hal.archives-ouvertes.fr/hal-01203236/file/etudescaribeennes-5013-17-crises-et-conflits-dans-les-territoires-insulaires-de-la-caraibe-et-de-l-ocean-indien-2009-2010.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Extreme rainfall events can trigger numerous landslides in mountainous areas and a prolonged increase of river sediment load. The resulting mass transfer at the Earth surface in turn induces stress changes at depth, which could be sufficient to trigger shallow earthquakes. The 2009 Morakot typhoon represents a good case study as it delivered 3 m of precipitation in 3 days and caused some of the most intense erosion ever recorded. Analysis of seismicity time-series before and after the Morakot typhoon reveals a systematic increase of shallow (i.e. 0-15 km of depth) earthquake frequency in the vicinity of the areas displaying a high spatial density of landslides. This step-like increase in frequency lasts for at least 2-3 years and does not follow an Omori-type aftershock sequence. Rather, it is associated to a step change of the Gutenberg-Richter b-value of the earthquake catalog. Both changes occurred in mountainous areas of southwest Taiwan, where typhoon Morakot caused extensive landsliding. These spatial and temporal correlations strongly suggest a causal relationship between the Morakot-triggered landslides and the increase of earthquake frequency and their associated b-value. We propose that the progressive removal of landslide materials from the steep mountain landscape by river sediment transport acts as an approximately constant increase of the stress rate with respect to pre-typhoon conditions, and that this in turn causes a step-wise increase in earthquake frequency. To test this hypothesis, we investigate the response of a rate-and-state fault to stress changes using a 2-D continuum elasto-dynamic model. Consistent with the results of Ader et al. (2013), our preliminary results show a step-like increase of earthquake frequency in response to a step-like decrease of the fault normal stress. We also investigate the sensitivity of the amplitude and time-scale of the earthquake frequency increase to the amplitude of the normal stress change and to rheological parameters. Our study offers new insights on the potential influence of extreme erosional events on the short-time scale dynamics of faults and earthquakes.
American Geophysical Union Fall Meeting 2016
San Francisco, United States

insu-01416987
https://hal-insu.archives-ouvertes.fr/insu-01416987

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Porous sandstones tend to deform by the formation of low-permeability deformation bands that influence fluid flow in reservoir settings. The bands may be distributed or localized into clusters, and limited recent data suggest that tectonic regime may exert control on their distribution and clustering. In order to explore this suggestion, we performed a synthetic analysis based of 73 sets of bands, including 22 new sets measured for a reverse Andersonian regime that fill the important gap in data for this context. We find a surprisingly strong correlation between clustering and tectonic regime, where bands clearly are more distributed in the reverse regime compared to the normal regime. Together with the observed band distributions, capillary pressure data show evidence that efficient membrane seals are expected for extension, whereas pervasive permeability anisotropy is expected for contraction. Such a basic new rule concerning tectonic regime is very useful for assessment of reservoir properties where deformation bands are common but below seismic resolution.
ISSN: 0091-7613

hal-01355925
https://hal.archives-ouvertes.fr/hal-01355925
DOI : 10.1130/G37585.1

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The interpretation of coseismic surface deformation measurements through inversion techniques is of major importance to understand the mechanical behaviour of a seismic fault. Dense geodetic data sets in the vicinity of the ruptured fault provide unique constraints on detailed fault geometry and slip distribution at depth, making them complementary to seismological data. Bam earthquake (Mw 6.6, 2003 December 26) induced surface deformation has been precisely mapped by Envisat ASAR interferometry and by subpixel correlation techniques applied to Spot-5 and ASAR amplitude images. These oblique and horizontal estimations of deformation have been completed with one levelling profile along the main road crossing the rupture from west to east. We process these data (separately and jointly) in a two-step inversion technique, within the elastic half-space theory framework. Our objective is to determine the dislocation model at depth that satisfies simultaneously all the geodetic constraints. Also, we estimate the relative contribution of each geodetic data set to this inversion process.We first use a stochastic direct approach called neighbourhood algorithm in order to estimate the average characteristics of the rupture, and their relative uncertainty. Constraining in this way the geometry of the ruptured fault, we then linearize the inverse problem and compute the slip distribution on the fault using a standard weighted least-square technique, assuming the solution is smooth to some degree. At each step, we discuss the optimal models, their stability as well as the relative influence of each data set on the derived models parameters. Our preferred model reveals a shallow dislocation on a quasi-vertical fault, slightly dipping towards east. The slip vector has a strike-slip component as high as 2 m, while the dip-slip component seems negligible.However, the estimation of the resolution matrices emphasizes the fact that the details of deep fault slip distribution remain out of the scope of this ill-conditioned inverse problem. Yet, our preferred model suggests a main dislocation limited at depth between 1 and 6 km. By contrast, the aftershocks observed in the months following the earthquake are located just beneath the estimated main shock.
ISSN: 0956-540X

hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173/document
https://hal.archives-ouvertes.fr/hal-00314173/file/GJI-2007-169-849-briole.pdf
DOI : 10.1111/j.1365-246X.2007.03358.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyzed twelve fault gouge samples from the Bogd fault in south-western Mongolia to understand the origin and behavior of clay minerals. The investigation relies on x-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high energy synchrotron x-ray diffraction methods to investigate microstructure and preferred orientation. Smectite (montmorillonite), illite-smectite mixed layers, illite-mica and kaolinite are the major clay components, in addition to quartz and feldspars, which are present in all samples. The observations suggest that the protoliths and the fault rocks were highly altered by fluids. The fluid-rock interactions allow clay minerals to form, as well as alter feldspars to precipitate kaolinite and montmorillonite. Thus, newly formed clay minerals are heterogeneously distributed in the fault zone. The decrease of montmorillonite component of some of the highly deformed samples also suggests that dehydration processes during deformation were leading to illite precipitation. Based on synchrotron x-ray diffraction data, the degree of preferred orientation of constituent clay minerals is weak, with maxima for (001) ranging from 1.3 to 2.6 multiples of a random distribution (m.r.d). Co-existing quartz and feldspars have random orientation distributions. Microstructure and texture observations of the gouges from the foliated microscopic zone, alternating with micrometric isotropic clay-rich area, also indicate that the Bogd fault experienced brittle and ductile deformation episodes. The clay minerals may contribute to a slip weakening behavior of the fault.
ISSN: 0191-8141

insu-00667194
https://hal-insu.archives-ouvertes.fr/insu-00667194
DOI : 10.1016/j.jsg.2011.10.006