Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
BACKGROUND: Estrogen receptors (ER) α and β are found in both women and men in many tissues, where they have different functions, including having roles in cell proliferation and differentiation of the reproductive tract. In addition to estradiol (E2), a natural hormone, numerous compounds are able to bind ERs and modulate their activities. Among these compounds, phytoestrogens such as isoflavones, which are found in plants, are promising therapeutics for several pathologies. Glyceollins are second metabolites of isoflavones that are mainly produced in soybean in response to an elicitor. They have potentially therapeutic actions in breast cancer by reducing the proliferation of cancer cells. However, the molecular mechanisms driving these effects remain elusive. METHODS: First, to determine the proliferative or anti-proliferative effects of glyceollins, in vivo and in vitro approaches were used. The length of epithelial duct in mammary gland as well as uterotrophy after treatment by E2 and glyceollins and their effect on proliferation of different breast cell line were assessed. Secondly, the ability of glyceollin to activate ER was assessed by luciferase assay. Finally, to unravel molecular mechanisms involved by glyceollins, transcriptomic analysis was performed on MCF-7 breast cancer cells. RESULTS: In this study, we show that synthetic versions of glyceollin I and II exert anti-proliferative effects in vivo in mouse mammary glands and in vitro in different ER-positive and ER-negative breast cell lines. Using transcriptomic analysis, we produce for the first time an integrated view of gene regulation in response to glyceollins and reveal that these phytochemicals act through at least two major pathways. One pathway involving FOXM1 and ERα is directly linked to proliferation. The other involves the HIF family and reveals that stress is a potential factor in the anti-proliferative effects of glyceollins due to its role in increasing the expression of REDD1, an mTORC1 inhibitor. CONCLUSION: Overall, our study clearly shows that glyceollins exert anti-proliferative effects by reducing the expression of genes encoding cell cycle and mitosis-associated factors and biomarkers overexpressed in cancers and by increasing the expression of growth arrest-related genes. These results reinforce the therapeutic potential of glyceollins for breast cancer.
ISSN: 1478-811X

hal-01560288
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01560288
DOI : 10.1186/s12964-017-0182-1
PUBMED : 28666461

Éditeur(s) : Elsevier
Résumé : Penaeid shrimp reared in earthen ponds are exposed to sediment, which can, in some instances, induce a stress. In seawater, the osmoregulatory capacity (hyporegulation) is a useful tool to compare the physiological condition of shrimp exposed to various stressors. By keeping some shrimp in cages at different locations of a single pond heterogeneous in terms of sediment quality, it was possible, using osmotic pressure (OP), to identify some locations where the stress was maximum and some others where it was minimum. Simultaneously, sediment samples were taken and analysed in order to evaluate some physico-chemical parameters that could be related to the stress observed in the shrimps kept in the cages. This approach allowed to show a significant positive correlation between the pH of the sediment surface and the shrimp osmotic pressure. This result was confirmed in a study carried out in experimental 70-1 tanks, where osmotic pressure decreased significantly as water pH decreased from 7.0 to 6.5. The methodology developed in this study may be useful to evaluate the stress caused by sediment in shrimp farms. (C) 2004 Elsevier B.V. All rights reserved.
Aquaculture (0044-8486) (Elsevier), 2004-10 , Vol. 240 , N. 1-4 , P. 297-312

Droits : 2004 Elsevier
http://archimer.ifremer.fr/doc/2004/publication-1866.pdf
DOI:10.1016/j.aquaculture.2004.07.001
http://archimer.ifremer.fr/doc/00000/1866/

Éditeur(s) : Université de Bretagne Occidentale
Résumé : Study of mineral suspended particulate matter (SPM) is essential to understand ecosystem dynamics. SPM influences light penetration which is closely related to primary production and carries pollutants and nutrients within the water masses. This work aims to study near-surface mineral SPM dynamics in the English Channel using two complementary methods: remote-sensing by satellites and numerical modelling. Firstly, MODIS and MERIS satellite images processed by the IFREMER semi-analytical algorithm and describing non-algal SPM, are analysed to build three statistical models which are able to estimate near-surface SPM using simple variables, e.g., tidal coefficient, significant wave height and mean chlorophyll-a concentration. Secondly, the three-dimensional hydrosedimentary model ROMS (Regional Ocean Modeling System) is applied in the English Channel. It considers tidal forcing along open boundaries, wind stress at the sea-surface, wave-current interactions in the bottom boundary layer and realistic heterogeneous bottom sediments. Results of the more sophisticated statistical model is also used to impose SPM concentrations at open boundaries. Sensitivity tests on SPM boundary conditions show the importance of prescribing realistic sediment concentrations to improve the model predictions. Biological influences on mineral SPM are also tested using settling velocity and critical shear stress for erosion which vary with seasons. Both statistical and numerical models highlight and locate respective influences of tide, waves and biology on mineral SPM. Numerical predictions indicate that near-surface SPM is mainly composed of silts (>70%). Near-surface suspended silts come largely from seabed resuspension alongshore in the Eastern Channel and from the open boundaries of our limited-area coastal model at the West of Cotentin Peninsula and offshore. Near-surface SPM variations are investigated at semi-diurnal, neap-spring tidal cycle time scales and during a wave event. Finally, dynamics of sediments in the turbidity maximum zone around the Isle of Wight is examined depending on hydrodynamical conditions in order to distinguish the role played by advection and local erosion/settling processes in this area. Keywords: Suspended particulate matter, satellite, remote-sensing, modelling, English Channel, sediments, turbidity, tide, wave
L'étude des matières en suspension (MES) minérales est essentielle pour comprendre le fonctionnement des écosystèmes en Manche : les MES influencent la pénétration de la lumière dans la colonne d'eau, paramètre clé pour la production biologique, et sont susceptibles de transporter des polluants et nutriments. Lors de ce travail, la dynamique des MES minérales de surface en Manche est étudiée à l'aide de deux méthodes complémentaires : l'observation par satellite et la modélisation numérique tridimensionnelle. Dans un premier temps, les images satellite MODIS et MERIS, traitées par l'algorithme semi-analytique développé par l'IFREMER et représentant les MES non-algales de surface, sont analysées afin d'élaborer trois modèles statistiques permettant d'estimer la MES de surface en fonction de variables basiques telles que le coefficient de marée, la hauteur significative des vagues et la concentration moyenne en chlorophylle-a. Dans un deuxième temps, le modèle hydrosédimentaire multiclasse tridimensionnel ROMS (Regional Ocean Modeling System) est implémenté en Manche. Il prend en considération le forçage par la marée aux frontières ouvertes, la contrainte exercée par le vent à la surface de la mer, l'interaction houle-courant en couche limite de fond et l’hétérogénéité spatiale réaliste du lit sédimentaire. Les résultats du modèle statistique le plus sophistiqué sont également utilisés pour forcer la concentration en MES aux frontières ouvertes du domaine de calcul. Des tests de sensibilité sur les conditions limites montrent l'importance de considérer de manière réaliste les sédiments entrant en Manche par les frontières ouvertes lors de la modélisation numérique. L'influence de la biologie sur les MES minérales est testée en utilisant une formulation de la vitesse de chute et de la contrainte critique d'érosion variant saisonnièrement. Grâce à ces deux outils associés, les influences respectives de la marée, de la houle et de la biologie sur les MES minérales sont mises en avant et localisées en Manche. Le modèle numérique prédit que les MES de surface sont composées principalement de silts (>70%). Les silts en suspension en surface proviennent majoritairement du lit sédimentaire près des côtes en Manche orientale et des frontières ouvertes du domaine de calcul à l'ouest de la presqu'île du Cotentin et au large en Manche centrale et orientale. Les variations des MES de surface sont ensuite étudiées aux échelles des cycles de marée semi-diurnes, vive-eau/morte-eau et autour d'un épisode de houles. Enfin, l'évolution de la concentration de sédiments dans la zone de forte turbidité autour de l'île de Wight peut être analysée suivant les conditions hydrodynamiques afin d'évaluer les rôles respectifs des processus locaux d'érosion/dépot et d'advection dans la génération de ces turbidités remarquables. Mots-clés : Matière en suspension, télédétection, satellite, modélisation, Manche, sédiments, turbidité, marée, houle

Droits : 2013 UBO
http://archimer.ifremer.fr/doc/00157/26783/24884.pdf
http://archimer.ifremer.fr/doc/00157/26783/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault friction is a parameter that is difficult to assess along fault zones since its determination depends on the knowledge of any factor controlling the state of stress around faults. In brittle homogeneous rocks, a limited number of these factors, such as the shape of the fault surface, the vicinity of fault tips or the remote stress ratio, are crucial to constrain for this determination. In this paper, we propose to analyse a field example in which all these properties are met and where the nature of the slipped structure suggest differences in static friction. We compare the orientations of branching fractures at strike-slip relay zones between en echelon stylolites and en echelon joints both reactivated in shear. The field data are compared with both photoelastic and 3-D numerical models that consider the remote stress conditions and the role of the geometry of the strike-slip segments. Based on field observations, these analyses quantitatively demonstrate the significant role of fault friction on the local stress field orientation and subsequent fracture formation. This work points out that estimations of fault friction based on analyses of fracture patterns or in situ stresses must be accompanied with a thorough investigation of the 3-D fault shape, its segmentation and the remote stress state.
ISSN: 0191-8141

hal-00560999
https://hal.archives-ouvertes.fr/hal-00560999
DOI : 10.1016/j.jsg.2010.01.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the use of seismic noise produced by rivers to monitor the bed load transport in the case of a low-discharge braided river in the French Alps: the "torrent de St Pierre". For this purpose, we deployed two dedicated seismic networks during summers 2007 and 2008, for which the characteristics of the recorded continuous signal are similar despite changes in the sensor locations. For dry weather conditions, only melting of nearby glaciers controls the supply of water to the stream. In these conditions, the river hydrology and the seismic energy in the 2-80 Hz frequency band both follow a diurnal fluctuation similar to the thermal amplitude. In contrast during rainfall episodes, the temperature variation fails to explain the hydrodynamic changes. Dense cloud covers reduce glacier melting and the recorded seismic energy denotes bursts of high-frequency seismic noise well correlated with water level data. Comparisons between the recorded seismic signals and the collected hydrological and sediment load data indicate that a frequency band of 3-9 Hz best explains the water level changes and thus the seismic waves coming from the flow turbulence. These analyses also reveal the presence of a seismic noise threshold that might be linked to the water shear stress exerted by the flowing water. Using the seismic energy in this frequency band as a proxy of the fluvial shear stress, the seismic-hydrologic relationship may be sensitive to variations in bed load transport. The spectral content of the seismic energy shows patterns consistent with the mobilization of sediment particles. From the interpretations of the seismic wave attenuation of river sources, we finally propose that stations at a distance from the stream less than 50 m are able to record most sediment particles. Farther stations are still useful during extreme events when largest grain sizes are mobilized. More generally this study demonstrates the feasibility of using the river seismic signal to survey bed load transport in various river types from small braided mountain rivers like the "torrent de St Pierre" to the large entrenched Himalayan rivers.
ISSN: 0022-1694

hal-00644789
https://hal.archives-ouvertes.fr/hal-00644789
DOI : 10.1016/j.jhydrol.2011.07.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : The relationship between deformation and so-called fluid paleotransfers in minor faults has been analysed in an argillaceous formation located in the Causses Basin in France. The fluid paleotransfers are related to the fault activity to a large extent. We attempt to estimate the intensity of paleo-deviatoric stress magnitudes under which the fault activity may have occurred and consequently, the change in the structural fault permeability. The paleo-deviatoric stress magnitudes were calculated with the inverse method of Etchecopar applied to calcite twinning. The measured crystals are contained within the core zone of minor faults and this study is based on a previous complete microtectonic and microstructural analysis of the faults. In this paper, analysis of calcite twinning has been applied for the first time to vein fillings associated small faults in a context of relatively weak deformation, a condition ensured by the tectonic and structural analysis. Calculation and discussion of the paleo-deviatoric stress tensors in relation to the evolution of the structural fault permeability and to the hydraulic behaviour of the faults are the aim of this paper. The analysed faults, created and active during the same tectonic event, were permeable under a (;σ;1;–;σ;3;) mean value of 40–50 MPa. On the other hand, the reactivation of faults during a second tectonic event implies mean (;σ;1;–;σ;3;) value higher than 40–50 MPa, especially for the faults that are poorly oriented with respect to the principal tectonic stress directions. The core zone of these faults remained sealed and impermeable or became permeable by development of microcracks inside the pre-existing fillings.
ISSN: 0040-1951

hal-00407577
https://hal.archives-ouvertes.fr/hal-00407577
DOI : 10.1016/j.tecto.2006.09.014

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The reactivation of faults with near-optimal orientations is commonly considered to control the state of stress in the crust. Near the surface, where a principal stress direction is vertical, the attitude of such faults is explained by Anderson's theory. This raises the questions of how prevalent this type of faulting actually is in current seismicity, down to what depth it frequently occurs, and what range of friction angles explains it best. The Global Centroid Moment Tensor catalog is analyzed to address these questions. Dip-slip and strike-slip mechanisms are dominant, and oblique slips are relatively rare for well-constrained events with depths shallower than 30 km. Preferred Andersonian faulting is the simplest, but not the unique, explanation for this dominance. Isolating reverse, strike- slip, and normal events reveals an asymmetry in the distribution of nodal plane dips and plunges of the P, B, and T axes between reverse and normal faulting. Assuming that the most frequent events correspond to reactivation near optimal orientations yields 40-60 degrees and 0-20 degrees friction angles for reverse and normal faults, respectively. This indicates that reverse and normal faulting mechanics are not symmetrical with respect to stress configuration as predicted by Anderson's theory.
ISSN: 8755-1209

hal-00412159
https://hal.archives-ouvertes.fr/hal-00412159
DOI : 10.1029/2007RG000240

Éditeur(s) : HAL CCSD Elsevier
Résumé : We use a triangular representation of the plunges of P, B, and Taxes to compare the different ways tectonic regime is inferred from earthquake focal mechanisms in recent works. We argue that P, B, and Taxes provide a reasonable estimate of principal stress directions when faulting is close to Andersonian conditions, and that this can be estimated from the location on a triangular diagram. We analyze the geometrical relationship between the plunges of P, B, and Taxes on one hand, and the rake of slip and dip of nodal planes on the other hand. We show that the rake and dip level curves correspond to trajectories of the vertical direction along great and small circles with respect to the frame of the P, B. and Taxes. This shows that dip-slip faulting is compatible with vertical P or Taxes, but does not require it, and instead requires horizontal B axes. It also shows that strike-slip faulting does not require vertical B axes, but P and Taxes with equal plunges. This also reveals that focal mechanisms where P, B, and Taxes all have moderate plunge correspond to two very different types of nodal planes: a steeply dipping one with oblique slip and a moderately dipping one with strike-slip. Seismically active and moderately dipping strike-slip faults are to be found among these events.
ISSN: 0040-1951

hal-00486367
https://hal.archives-ouvertes.fr/hal-00486367
DOI : 10.1016/j.tecto.2009.03.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have studied the phase transformation of forsterite to wadsleyite under shear stress at the Earth's transition zone pressure and temperature conditions. Two-step experiments were performed using a multi-anvil press. First, we hot pressed iron-free forsterite at 6 or 11 GPa and 1100 degrees C. Then we deformed a slab of this starting material using a direct simple shear assembly at 16 GPa and 1400 degrees C for 1, 15, 35, 40, or 60 min. Both the starting material and the deformed samples were characterized using optical and scanning electron microscopy including measurements of crystal preferred orientations (CPO) by electron back scattered diffraction (EBSD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The phase transformation occurs very rapidly, in less than 1 min, and metastable forsterite relics are not observed after deformation. The grain size of wadsleyite is slightly smaller than the forsterite starting material. The water contents obtained from FTIR analyses in forsterite and wadsleyite are 65-124 wt ppm H2O and 114-736 wt ppm H2O, respectively, which are well below water solubility at similar conditions in the presence of free water. Wadsleyite aggregates display weak CPO patterns with [1 0 0] axes concentrated at low angle to the shear direction, [0 1 0] axes perpendicular to the shear plane and nearly random [0 0 1] axes. Only a few dislocations were observed in wadsleyite with TEM. This observation is consistent with the assumption that most dislocations formed during the initial high-stress stages of these stress-relaxation experiments, were consumed in the phase transformation, probably enhancing the transformation rate. CPO patterns vary as a function of the water content: with increasing water content the density of [1 0 0] axes parallel to the shear direction decreases, and the density of [0 0 1] axes increases. Viscoplastic self-consistent modeling of CPO evolution using previously reported glide systems for wadsleyite, i.e., [1 0 0]{0 k 1} and 1/2 (1 1 1){1 0 1}, cannot reproduce the measured CPO, unless the [0 0 1](0 1 0) system, for which dislocations have not been observed by TEM, is also activated. In addition, wadsleyite grain growth suggests the participation of diffusion-assisted processes in deformation. Calculated anisotropies for P and S-waves using measured CPO are always below 1%. This very low anisotropy is due to both the low finite strain achieved in the experiments, which leads to weak wadsleyite CPO, and to the diluting effect of added majorite. The present experiments emphasize the importance of stress, grain size evolution and water content in the forsterite to wadsleyite phase transformation and subsequent deformation in the transition zone.
ISSN: 0031-9201

hal-00617430
https://hal.archives-ouvertes.fr/hal-00617430
DOI : 10.1016/j.pepi.2010.11.001

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
This is the second of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high void ratio is sheared in a load-controlled simple shear numerical device until the stress state of the sample reaches the yield stress. We first study the stress transmission properties of the granular material in terms of the fabric of different subsets of contacts characterized by the magnitude of their normal forces. This analysis highlights the existence of a peculiar force carrying structure in the cemented material, which is reminiscent of the bimodal stress transmission reported for cohesionless granular media. Then, the evolution of contact forces and torques is investigated trying to identify the micromechanical conditions that trigger macroscopic yielding. It is shown that global failure can be associated to the apparition of a group of particles whose contacts fulfill at least one of the local rupture conditions. In particular, these particles form a large region that percolates through the sample at the moment of failure, evidencing the relationship between macroscopic yielding and the emergence of large-scale correlations in the system.
ISSN: 1539-3755

hal-00523451
https://hal.archives-ouvertes.fr/hal-00523451
DOI : 10.1103/PhysRevE.82.011304

Éditeur(s) : HAL CCSD Ecological Society of America
Résumé : We investigated the relationship between habitat association and physiological performance in four congeneric species pairs exhibiting contrasting distributions between seasonally flooded and terra firme habitats in lowland tropical rain forests of French Guiana, including Virola and Iryanthera (Myristicaceae), Symphonia (Clusiaceae), and Eperua (Caesalpiniaceae). We analyzed 10-year data sets of mapped and measured saplings (stems 150 cm in height and <10 cm diameter at breast height [dbh]) and trees (stems 10 cm dbh) across 37.5 ha of permanent plots covering a 300-ha zone, within which seasonally flooded areas (where the water table never descends below 1 m) have been mapped. Additionally, we tested the response of growth, survival, and leaf functional traits of these species to drought and flood stress in a controlled experiment. We tested for habitat preference using a modification of the torus translation method. Strong contrasting associations of the species pairs of Iryanthera, Virola, and Symphonia were observed at the sapling stage, and these associations strengthened for the tree stage. Neither species of Eperua was significantly associated with flooded habitats at the sapling stage, but E. falcata was significantly and positively associated with flooded forests at the tree stage, and trees of E. grandiflora were found almost exclusively in nonflooded habitats. Differential performance provided limited explanatory support for the observed habitat associations, with only congeners of Iryanthera exhibiting divergent sapling survival and tree growth. Seedlings of species associated with flooded forest tended to have higher photosynthetic capacity than their congeners at field capacity. In addition, they tended to have the largest reductions in leaf gas exchange and growth rate in response to experimental drought stress and the least reductions in response to experimental inundation. The corroboration of habitat association with differences in functional traits and, to a lesser extent, measures of performance provides an explanation for the regional coexistence of these species pairs. We suggest that specialization to seasonally flooded habitats may explain patterns of adaptive radiation in many tropical tree genera and thereby provide a substantial contribution to regional tree diversity.
ISSN: 0012-9658

hal-01031746
https://hal.archives-ouvertes.fr/hal-01031746

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The emergent domain known as “Kasserine Island” in central Tunisia, to the West of the North–South Axis, was emerging during the Turonian. This area has undergone several changes during the Cretaceous–Eocene period. In the present study, the compilation of surface and sub-surface data provided new information about the boundaries variations of the emerged domain. The analysis of paleogeographic maps allowed the identification of three distinct stages of evolution. The first stage extents from the Middle Turonian to the Lower Maastrichtian where the emergent domain covers the area extending from Jebels Selloum-Sidi Aich in the West to Jebel Bouhedma in the East. The boundaries of this area coincide with the E–W Kasserine fault to the North, the N–S Lessouda-Boudinar fault in the East and the N 120 el Mech-Souinia flexure at the South. This emersion contemporaneous with a high eustatic level is most likely related to tectonic activity. The extensional tectonic regime that is characterized by a NE–SW minimal horizontal stress, has reactivated border faults with a normal component. The interference of the tilting of these border faults was at the origin of the emergence of this domain. The ascent of the Triassic salt may also have contributed in this uplift.In the second stage, the emerged domain has reached its maximum expansion to the North, the West and the South during the Middle Maastrichtian–Paleocene period. Its northern limit is irregular, while the southern limit coincides with the N120 Gafsa fault and the E–W fault of Jebels Orbata-Bouhedma. The N–S Lessouda-Boudinar fault forms the eastern limit. This expansion is mostly related to the global eustatic fall that is well characterized during this period, and partly to the compressive tectonic activity.The Lower Eocene is characterized by a marine transgression that has interested the northern edge of the Island, where the Ypresian deposits are discordant on older series. This edge was irregular and marked by the Gulf of Sbiba. The eastern, the southern, and the western boundaries kept the same shape as that of the previous stage. The compressive tectonic regime, characterized by a NW–SE maximum horizontal stress, is accentuated. This constraint state has generated NE–SW folds and NW–SE grabens. Some of these structures allowed the accumulation of a thick phosphate deposits at their edges, and continental deposits in the emerged area.During the Middle to Upper Eocene, the emergent area narrowed further at the North. The deposits are transgressive and discordant on older series. The Other limits always coincide with the Gafsa fault, the Jebels Orbata-Bouhedma and Jebels Lessouda-Boudinar faults. This period is characterized by the filling of the Gafsa basin by evaporate deposits before its emergence in the Oligocene. As a result, the southern-central Tunisia emerged as one area.
ISSN: 0899-5362

hal-01243490
https://hal.archives-ouvertes.fr/hal-01243490
DOI : 10.1016/j.jafrearsci.2015.07.027

Éditeur(s) : HAL CCSD
Résumé : This study is designed to improve the understanding of structural, mechanical and petrophysical characteristics of deformation bands in porous sandstone such as their potential influence on fluid storage or migration in reservoir setting. Structural and petrophysical analysis of band networks from Provence show that permeability of band is mainly controlled by the degree of cataclasis and diagenetic processes at depth. Map-scale analysis of band networks underlines the major influence of tectonic regime on band distribution, organization and permeability. Band associated to normal-fault regime (cataclasis and low-permeability) are located around map-sclae-fault whereas band associated to thurst-fault regime (moderate cataclasis and permeability) are pervasively distributed in all the area. Reverse-sense band are cataclastic and low-permeabiilty around the Roquemaure thrust, which show the potential role of large-scale fault on structural and petrophysical characteristics of bands. This analysis also shows the influence of fault propagation on formation of low permeability catacastic bands. This analysis suggests also granulometry as factor controlling organization of band networks.A mechanical analysis of deformation bands is realized based on results from Provence. Yield envelopes of these materials are calculated from analytical solution. Triaxial tests done on sandstone (L'Etang quarry, Orange) confirm the shape of yield envelope theoretically calculated. Triaxial tests done on the poorly-lithified sands (Boncavaï quarry, Uchaux) show grain size, sorting and packing influencing yield envelope and cataclastic band localization at shallow burial depth. Stress paths are calculated for burial and tectonic event (extension and contraction) using the relationship between main stress and secondary stresses (K0) calibrated from well data. These different results are integrated into a model which allows to estimate type and structural characteristics of bands susceptible to form for a known geological setting.A structural, mechanical and petrophysical model is established form these results. This model is calibrated by permeability data from deformation bands of Provence and results from the mechanical model of strain localization. This model is also confronted to a synthesis of permeability data from literature, which confirms the influence of the different controlling parameters integrated to the model. This model is applied for two sites of uranium exploration/exploitation in porous sandstone reservoirs and validated by field observations.
Cette étude est destinée à améliorer la compréhension des caractéristiques structurales, pétrophysiques et mécaniques des bandes de déformation dans les grès poreux ainsi que de leur rôle potentiel sur la migration ou le piégeage des fluides en milieu réservoir. L'analyse structurale et pétrophysique des réseaux de bandes de Provence montre que leur perméabilité découle principalement de l'intensité de la cataclase dans leur microstructure et des processus diagénétiques qui peuvent s'y localiser avec la profondeur. L'analyse régionale de ces réseaux de bandes souligne l'influence majeure du régime tectonique sur leur distribution, leur organisation et leur perméabilité. Les bandes associées au régime normal (cataclactiques et peu perméables) sont localisées autour des failles cartographiques, tandis que les bandes associées au régime inverse (modérement cataclastiques et perméables) sont distribuées dans toute la région. Les bandes inverses sont fortement cataclastiques et imperméables uniquement autour du chevauchement de Roquemaure ce qui montre le rôle potentiel de la présence de grande faille sur les caractéristiques structurales et pétrophysiques de ces bandes. D'autre part, cette analyse suggère que la granulométrie de l'encaissant peut influencer l'initiation et l'organisation des réseaux. L'analyse mécanique des bandes de déformation a ensuite été réalisée à partir des résultats obtenus en Provence. L'enveloppe de plasticité de ces matériaux est calculée à l'aide d'une solution analytique. Les essais triaxiaux menés sur le grès de la carrière de l'Etang (orange) confirment la forme de ces enveloppes estimées théoriquement. Les essais réalisés sur les sables de Boncavaï (Uchaux) montrent que la taille des grains, le tri et de la compaction dans ces matériaux peu lithifiés influent sur leurs enveloppes de plasticité et la localisation des bandes cataclastiques à faibles profondeurs. Les trajets de contraintes sont estimés pour les phases d'enfouissement et de chargement tectonique (extension et compression) à partir de la relation entre contrainte principale et contraintes secondaires (K0), calibrée à partir de données de forage. Ces résultats sont intégrés à un modèle permettant d'estimer la nature et les caractéristiques structurales des bandes susceptibles de se former dans un contexte géologique donné. Un modèle structural, mécanique et pétrophysique a été établir à partir de ces différents résultats. Ce modèle est calibré à partir des données de perméabilité mesurées sur les bandes de Provence et des résultats du modèle mécanique de localisation cité précédemment. Ce modèle a ensuite été confronté à une synthèse des données de perméabilité disponibles dans la littérature et confirme l'influence des différents paramètres de contrôle pris en compte dans le modèle. Ce modèle a enfin pu être appliqué sur deux sites d'explorations/exploitations d'uranium en réservoir gréseux poreux et validé par les résultats obtenus, en concordance avec les observations de terrain.
https://tel.archives-ouvertes.fr/tel-01001389

NNT : 2013MON20067
tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389/document
https://tel.archives-ouvertes.fr/tel-01001389/file/36072_BALLAS_2013_archivage-1_cor.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : Unveiling the genetic basis of local adaptation to environmental variation is a major goal in molecular ecology. In rugged landscapes characterized by environmental mosaics, living populations and communities can experience steep ecological gradients over very short geographical distances. In lowland tropical forests, interspecific divergence in edaphic specialization (for seasonally flooded bottomlands and seasonally dry terra firme soils) has been proven by ecological studies on adaptive traits. Some species are nevertheless capable of covering the entire span of the gradient; intraspecific variation for adaptation to contrasting conditions may explain the distribution of such ecological generalists. We investigated whether local divergence happens at small spatial scales in two stands of Eperua falcata (Fabaceae), a widespread tree species of the Guiana Shield. We investigated Single Nucleotide Polymorphisms (SNP) and sequence divergence as well as spatial genetic structure (SGS) at four genes putatively involved in stress response and three genes with unknown function. Significant genetic differentiation was observed among sub-populations within stands, and eight SNP loci showed patterns compatible with disruptive selection. SGS analysis showed genetic turnover along the gradients at three loci, and at least one haplotype was found to be in repulsion with one habitat. Taken together, these results suggest genetic differentiation at small spatial scale in spite of gene flow. We hypothesize that heterogeneous environments may cause molecular divergence, possibly associated to local adaptation in E. falcata.
ISSN: 1010-061X

hal-01032412
https://hal.archives-ouvertes.fr/hal-01032412
DOI : 10.1111/jeb.12069

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We performed torsional deformation experiments on pre-hydrated fine-grained olivine aggregates using an innovative experimental assembly to investigate water weakening in mantle rocks at high shear strains. San Carlos olivine powder was cold-pressed and then hot-pressed under hydrous conditions, producing aggregates with average grain sizes of 7 or 15 μm. Deformation experiments were performed in a high-resolution gas-medium apparatus equipped with a torsional actuator, under a confining pressure of 300 MPa, a temperature of 1200 °C, and constant shear strain rates ranging from 8 × 10−5 to 1.4 × 10−4 s−1. Maximum shear stresses range from 150 to 195 MPa. These values are 30% lower relative to those determined in previous torsion experiments on dry, fined-grained dunites under similar conditions. Textures and microstructures of the starting and deformed specimens were characterized by scanning and transmission electron microscopy. All deformed aggregates exhibit a shape-preferred orientation marking a foliation and lineation, as well as a reduction in mean grain size from 15 μm down to 3-4 μm due to dynamic recrystallization. Olivine crystallographic fabrics developed rapidly (γ < 0.1), but their strength, characterized by the J-index, is low compared to naturally deformed peridotites or to polycrystalline olivine deformed at similar finite shear strains under dry conditions. The crystallographic fabrics are consistent with deformation by a dislocation accommodated creep mechanism with activation of multiple {0 k l}[1 0 0] systems, among which the (0 1 0)[1 0 0] slip system is dominant, and minor participation of the (0 1 0)[0 0 1] slip system. Transmission electron microscopy confirmed the occurrence of dislocations with [1 0 0] and [0 0 1] Burgers vectors in most grains. Analysis of unpolarized infrared spectra indicates that hydrogen concentration in the olivine lattice is below the saturation level of 18 ppm wt H2O, which is similar to those typically observed in spinel-bearing peridotite xenoliths, and also provide evidence for water-rich inter-granular material trapped in pores and grain boundaries. Seismic properties computed from the CPO observations correspond to those most commonly observed in naturally deformed mantle peridotites with fast P-wave propagation and S-wave polarization subparallel to the shear direction. These torsion experiments on fine-grained olivine polycrystals under hydrous conditions indicate that water weakening under lithospheric conditions is linked to various defects with hydrogen in the olivine structure, as well as with water-derived species in grain boundaries or pores.
ISSN: 0031-9201

hal-00745170
https://hal.archives-ouvertes.fr/hal-00745170
DOI : 10.1016/j.pepi.2012.05.001

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : We have applied transmission electron microscopy (TEM) analyses coupled with viscoplastic self-consistent (VPSC) numerical modelling to identify the active slip systems and to better understand the crystal preferred orientation (CPO) development of the Torridon quartz mylonite (NW Scotland). TEM analyses showed evidence of activation of 1/3〈a〉{π′}, 1/3〈a〉{z} and possible 〈a〉(c) slip systems, as well as dislocation climb and dynamic recrystallization. All the CPOs generated by VPSC models share common characteristics with the Torridon quartz mylonite, but only Models 2 and 3 reproduce the [c]-axes maxima at low angle (<20°) to the foliation pole along the YZ plane, as observed in the mylonite. In Model 2, this concentration only occurs at γ≥2.6, whereas in Model 3 this maxima occurs at lower shear strains. The models that start with a previous preferred orientation acquire very strong CPOs after small-imposed strains, followed by the rapid rotation of the fabric in relation to the new imposed finite strain axes. The combined activation of 〈a〉{π′}, 〈a〉{z} and possibly 〈a〉(c) slip systems, as demonstrated by TEM analyses, suggests that the VPSC model that best predicts CPO development in the Torridon quartz mylonite is Model 2, where the critical resolved shear stress (CRSS) of 〈a〉{π/π′} is assumed to be slightly stronger than 〈a〉(c).
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688840
https://hal.archives-ouvertes.fr/hal-00688840

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the interactions between deformation and percolation of melt or fluids, as well as on the implications of these processes for the seismic properties of the mantle wedge. It is based on the analysis of spinel peridotites from the massif of Ronda (Spain) and two xenolith suites from active subduction zones (Kamchatka, Papua New Guinea). A coupled structural, petrological and geochemical study of these samples shows that they underwent a reactive percolation of melts or Si-rich fluids, which was synchronous to a deformation event occurring under high temperature and low stress conditions, consistent with the PT conditions at the base of the lithosphere or in the asthenosphere. This reactive percolation is responsible for enrichment in pyroxenes, mainly orthopyroxene, which is often localized in bands parallel to the high-temperature foliation. This enrichment is associated with grain size reduction and dispersion of the crystallographic orientation of olivine. The dominant slip system in olivine is {0kl}[100], which results in fast S-wave polarization parallel to the flow direction in the mantle. The decrease in the intensity of the olivine crystal preferred orientations associated with the enrichment in pyroxene results in significant decrease of the anisotropy that may induce an underestimation of the thickness of the anisotropic layer by up to 33%. The observed orthopyroxene enrichment also lowers the Vp/Vs ratio, but cannot explain Vp/Vs < 1.7 mapped locally in the fore-arc mantle in Japan and the Andes. Such low Vp/Vs ratios may however be explained by considering the intrinsic anisotropy of the peridotites, which is generally ignored in large-scale Vp/Vs ratio mapping of the mantle wedge. Infrared analyses show that olivine from the both xenolith collections contains less water than the theoretical saturation calculated for their estimated equilibrium temperature in the spinel stability field. These low water content are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at relatively low pressure and dehydration during exhumation of the xenoliths. These measured water contents as well as theoretical saturation estimations are not sufficient to change the dominant slip direction of in olivine from [100] to [001].
Ce travail apporte de nouvelles contraintes sur les interactions entre déformation et processus d'hydratation et de percolation de magma ou de fluides dans le manteau à l'aplomb d'une zone de subduction et leurs implications sur les propriétés sismiques dans le coin mantellique. Il se base sur l'analyse de péridotites à spinelle provenant du massif de Ronda (Espagne) et deux séries de xénolites issues de zones de subduction actives (Kamchatka, Papouasie-Nouvelle-Guinée). L'étude structurale, pétrologique et géochimique de ces échantillons montrent qu'ils ont subit une percolation réactive de magma ou de fluide synchrone d'une déformation de haute température basse contrainte cohérente avec les condition PT de la base de la lithosphère ou de l'asthénosphère. Cette percolation réactive est responsable d'un enrichissement en pyroxènes, qui est souvent localisé dans des bandes parallèles à la foliation. Cet enrichissement est associé à une dispersion de l'orientation cristallographique de l'olivine. Les systèmes de glissement dominant dans l'olivine sont dans tous les cas {0kl}[100], ce qui implique que la direction de polarisation rapide des ondes S dans la partie supérieure du coin mantellique est parallèle à la direction d'écoulement dans le manteau. La décroissance de l'intensité des OPR de l'olivine associée à l'enrichissement en pyroxènes a pour conséquence une réduction non négligeable de l'anisotropie sismique qui peut induire jusqu'à 33% d'erreur sur l'interprétation de l'épaisseur de la couche anisotrope. Un enrichissement en orthopyroxène peut aussi entraîner une baisse du rapport Vp/Vs, mais ne peut expliquer les rapports Vp/Vs <1,7 cartés dans certains avant-arcs. Cependant de telles valeurs peuvent être expliquées si l'anisotropie des péridotites du coin mantellique est prise en compte. Les analyses par spectroscopie infra-rouge montrent que les olivines des deux séries de xénolites étudiées contiennent moins d'eau que la saturation théorique calculée pour leurs températures d'équilibre dans le domaine du spinelle. Ces faibles concentrations en eau sont similaires à celles observées dans les olivines des péridotites à spinelle des autres zones de subduction. Elles enregistrent probablement la faible solubilité de l'eau dans l'olivine à des pressions relativement basses et la déshydratation au cours de l'exhumation des xénolites. Ces teneurs en eau mesurées ainsi que les estimations de la saturation théorique ne sont pas suffisantes pour changer la direction de glissement dominante dans l'olivine de [100] à [001].
https://tel.archives-ouvertes.fr/tel-00689832

tel-00689832
https://tel.archives-ouvertes.fr/tel-00689832
https://tel.archives-ouvertes.fr/tel-00689832/document
https://tel.archives-ouvertes.fr/tel-00689832/file/These-Soustelle2010.pdf