Résumé : The boundaries of territorial waters are not as stable as boundaries on land. Nowadays, indeed they are characterised by their very mobility. No doubt the reason for this is political. A state which sought to further her own interests by enlarging her domain within her own waters would encounter no sovereign opposition. Additonally, with the collapse of the traditional "understanding" regarding the conception of -and the criteria governing -maritime boundaries. nations chose the most effective methods of appeasing their own needs and appetites. This was achieved with the maximum ingenuity. The natural boundary myth was shaken sometimes before and sometimes simultaneously with, the cultivation of negotiating skills or, from a position of strength. the imposition of "political limits". Fruitful sources of approximation were provided by phenomena such as low-water mark, the continental shelf. the Humboldt current and so on. As for accuracy. however. this was obtained by the application of geometrical methods such as calculation on a straight line basis or by equidistance or. again. by numeric evaluation : expression of distance in nautical miles. The general effect of this medley of arguments - or pretexts - has been to add to the fluctuating nature of sea boundaries rather than contribute to their stability. In fact. the only way stabilisation of these boundaries is usually achieved is by confrontation between two or more adjacent and competing sovereign states once the question of demarcation has been hammered out. The ocean, "man's common heritage", seems to have entered a phase of parcelling out, of sharing. [NOT CONTROLLED OCR]
Les frontières maritimes n'ont pas la stabilité des frontières terrestres. Dans la présente époque, au contraire, elles se caractérisent essentiellement par leur mobilité. La principale raison de ce phénomène est sans doute d'ordre politique : au large de sa mer territoriale, l'État ne rencontre pas d'autre souveraineté lorsque ses intérêts le portent à étendre son emprise. Aussi, lorsque le « consensus » international traditionnel sur la conception et le critère de la frontière maritime fut ruiné. les États laissèrent libre cours à leur ingéniosité pour choisir les techniques les plus adéquates à la pleine satisfaction de leurs besoins et de leurs appétits. Tour à tour, et, parfois. simultanément. fut agité le mythe de la « frontière naturelle » et cultivé l'art de négocier ou d'imposer, selon les rapports de force. des "limites politiques". La "laisse de basse mer", la "marge continentale ", le courant de Humboldt. etc. fournirent des approximations fécondes. Mais la certitude est venue des techniques géométriques (lignes de base droites, équidistance) ou des évaluations chiffrées (distance exprimée en milles marins). De façon générale. ces divers arguments, ou prétextes. ont puissamment alimenté le dynamisme des frontières maritimes et fort peu contribué à leur stabilisation. Celle-ci ne procède finalement que de la rencontre de deux ou plusieurs souverainetés voisines et concurrentes. une fois tranchées les querelles de "bornage". L'océan, "héritage commun de l'humanité", est entré, semble-t-il, dans une phase de liquidation et de partage... [OCR NON CONTRÔLE]

Droits : 1979 CNEXO
http://archimer.ifremer.fr/doc/1979/rapport-4798.PDF
http://archimer.ifremer.fr/doc/00000/4798/

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present field data from segmented normal faults having particular displacement and overlapping geometries that may be related to down-dip branching of the fault segments. Based on a 3-D numerical modeling study of computed displacement and stress fields around different geometries of down-dip branched normal fault segments, we show that the bends of fault surfaces that coalesce at depth exert a significant influence on (I) the displacement distribution on the fault segment branches and (2) the quasi-static stress fields around the relay zones. The asymmetry in the displacement profiles and low fault interaction at relay zones modeled are consistent with the fault segment geometries observed in field data. As an application, we model the geometry and interaction of the Vallo di Diano normal fault which is segmented at the Earth's surface and which produced an earthquake of magnitude 6.4 along a single fault surface at depth. Numerical modeling of the segmented fault produces an asymmetric displacement profile and low shear stress at the relay zone consistent with the profile and fault interaction inferred from the held. We conclude that asymmetry of the displacement profile and large overlap/separation ratio of the unlinked relay zone can be indicators of the presence of a continuous fault surface underneath. These geometrical attributes are therefore important to consider in the probabilistic analysis of seismic hazard along segmented normal faults.
ISSN: 0191-8141

hal-00411161
https://hal.archives-ouvertes.fr/hal-00411161
DOI : 10.1016/j.jsg.2008.07.005

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have a fractal pore-grain interface. In this paper a computer simulated 3-D sedimentary rock structure generated by the Relaxed Ballistic Bidisperse Deposition Model (RBBDM), is investigated to characterize the micro structure of its pores. The pore volume and the rock-pore interface show the same fractal dimension indicating that the pore volume is a fractal. The two point density correlation is computed for the pore space and the results compare favourably with the range reported from experiments. An array of 2-D X-ray tomography micrograph sections of a real sedimentary rock, an oolitic limestone (pure calcite) from the Mondeville formation of Middle Jurassic age (Paris Basin, France), was used to generate a 3-D bitmap. The 3-D real rock sample generated in this manner, was analysed for similar studies as the simulated structure. The results were compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. Diffusion through the connected pore space of the simulated structure was studied using a random walk algorithm and the results compared with the similar simulation study done on the 3-D oolitic limestone specimen. In both cases diffusion was found to be anomalous indicating that the sedimentary rock has a fractal geometry. The favourable comparability of results between the simulated and real rock supports the usefulness of the model of sedimentary rock generation which can be applicable to transport phenomena.
ISSN: 0956-540X

hal-00823061
https://hal.archives-ouvertes.fr/hal-00823061
DOI : 10.1093/gji/ggs084

Éditeur(s) : HAL CCSD
Résumé : The present study addresses the question of increasing need in water supply. One line of research consists in investigating karst aquifers that represent significant water supplies for the areas around the Mediterranean. This work aims at developing a methodology of predictive evaluation of karst distribution and karst thickness within the carbonate massifs. It is based on the study of the Tethysian carbonate platform from the area of Montpellier, South of France. This area underwent a polyphased, complex, tectonic evolution, involving successive karst forming events. The approach is based on the relationships between eustacy and geodynamics, on one hand, and base-level variation recorded within palaeokarsts, on the other hand. Sedimentary fill of palaeokarsts allows to identify distinct karstification phases and sometimes to date them. It is a marker of base-level variations, which we attempt to quantify, that is responsible for karst formation and karst filling and sealing. For three palaeokarsts of regional extent, we analyze : karst sedimentary-fill, the distribution along upstream-downstream profile, the vertical extension of palaeokarsts, indicative of the base-level lowering. - The " Bauxite palaeokarst " results from the two-stage evolution of the " Isthme Durancien " : i) Bauxitic weathering of the Neocomian cover over the southern Massif Central , related to an inversion during Barremian ; ii) ≥1600 m uplift and exhumation during Aptian-Albian, inducing erosion of alterites, upstream, and deposition of detrital bauxites, downstream. - The " Early Paleocene palaeokarsts with marine sedimentary-fill " indicate base level variations of more than 350m in the upstream area. It is suggested here that such base-level variations, exceeding eustacy and recorded in tabular undeformed series, result from desiccation-flooding events in an endoreic silled basin. - The " Miocene palaeokarst with Cevennes-sourced sediment-fill " records a Serravalian-Tortonian base-level drop, depicted by canyon incision in the hinterland of the Gulf of Lion Margin. Uplift values of ≥ 400m upstream, about 250m in an intermediate area and 10's of m downstream, are measured. The present 3D geometry and distribution of carbonate massifs (exposed and covered) are modeled in the study area, from the Cevennes to the Mediterranean. The 3D geological model integrates seismic reflection, borehole and gravimetric data. Tectonic restoration of a N-S section, extracted from the 3D model, allows to reconstruct paleo-base-levels with respect with the carbonate massifs, at different stages of deformation and successive phases of karstification. The 3D paleo-flows through carbonates across the study area, are thus constrained, especially during the Messinian desiccation stage. Application of the results to hydrogeology leads to the following : - Uplift of upstream hinterland (Cretaceous, Miocene) produces large amplitude karsts, but they do not make significant reservoirs. - Karstification responsible for the development of important and deep karst reservoirs is related to desiccation of endoreic basins (early Paleocene and Messinian). - Theses two events have produced two main deep karst reservoirs, with a gravimetric signature : (1) Upstream of Montpellier Thrust, between Pic St Loup, Les Matelles Fault and Hérault Basin, a deep karsts developed over 900m thickness in the Malm limestone, during Paleocene. (2) Downstream (south) of Montpellier Thrust, the coastal karsts extend offshore over more than 10km, they are sealed by a thick Miocene to Quaternary cover, and they result from the Messinian event.
Cette étude s'inscrit dans un contexte de demande croissante en ressources en eau, conduisant à mieux contraindre et estimer la distribution des aquifères karstifiés qui représentent une ressource importante, notamment sur le pourtour méditerranéen. Le but de ce travail est d'élaborer une méthode prédictive de la distribution de la karstification et de l'épaisseur de massifs carbonatés karstifiés, notamment pour les karsts profonds. La méthodologie est développée à partir de l'étude des karsts de la plateforme carbonatée téthysienne du Languedoc montpelliérain; région qui a subi une histoire tectonique complexe et polyphasée, entrainant des phases de karstification successives. Elle est basée sur la compréhension des relations entre eustatisme, géodynamique et niveau de base, enregistrées par les paléokarsts de la région. Le remplissage sédimentaire des paléokarsts permet d'identifier les épisodes de karstification et de les dater ; c'est un marqueur des variations -que l'on cherche à quantifier- du niveau de base local responsable de la formation et du comblement des karsts. On analyse 3 paléokarsts d'extension régionale dont on peut étudier : le remplissage karstique, la distribution le long de profils amont-aval et l'extension verticale indicatrice de l'amplitude de l'abaissement du niveau de base dont il est issu. On en déduit les causes géodynamiques à l'origine de leur formation: - Le " paléokarst des bauxites " à remplissage caractéristique, résulte de l'évolution en 2 phases de " l'Isthme Durancien " : altération bauxitique de la couverture néocomienne sur le sud du Massif Central, liée à une inversion au Barrémien, suivi d'une surrection ≥ 1600m à l'Aptien-Albien, causant l'érosion des altérites en amont et le dépôt des bauxites détritiques en aval. - Le " paléokarst à remplissage marin paléocène inférieur " indique des variations du niveau de base local ≥350m dans la zone amont sud-cévenole. On propose que ces variations de niveau de base d'amplitude très supérieures aux variations eustatiques et dans une zone faiblement déformée, résultent d'assèchements et d'ennoiements d'un bassin endoréique à seuil. - Le " paléokarst à remplissage détritique d'origine cévenole ", enregistre la chute du niveau de base au Serravalien-Tortonien, qui se traduit par l'incision de canyons dans l'arrière-pays de la marge du Golfe du Lion. On détermine une surrection de plus de 400 mètres à l'amont, près de 250m dans les blocs faillés intermédiaires et quelques dizaines de mètres dans la zone avale. En parallèle, on établit la géométrie et la distribution actuelles des massifs carbonatés dans la zone d'étude (y compris sous couverture), en construisant un modèle géologique 3D, des Cévennes à la Méditerranée. On intègre les données de sismique réflexion, de forages et les données gravimétriques. La restauration tectonique séquentielle d'une coupe Nord-Sud extraite du modèle géologique permet d'appréhender la position des paléo-niveaux de base par rapport aux massifs carbonatés, pour chaque époque de karstification. On déduit l'organisation 3D des paléo-écoulements à travers la géométrie complexe des massifs carbonatés languedociens, notamment pendant l'évènement messinien. En terme d'évaluation de la ressource en eau, on déduit que: - Les surrections de l'arrière-pays (Crétacé " moyen ", Miocène) produisent des karsts de grande amplitude, mais ne constituent pas de réservoirs significatifs. - La karstification à l'origine de réservoirs exploitables importants et profonds est créée par l'assèchement de bassins endoréiques, qui ont affecté la région au Paléocène inférieur et au Messinien . - Ces deux évènements sont à l'origine de deux principaux réservoirs karstiques profonds qui ont une signature gravimétrique : (1) En amont du chevauchement de Montpellier, entre le Pic Saint Loup, la faille des Matelles et le bassin de l'Hérault, le karst profond se développe sur une épaisseur atteignant 900m, et est attribuée à l'événement du Paléocène. (2) Au Sud du chevauchement de Montpellier les karsts côtiers s'étendent jusqu'à plus de 10 km au large, scellés par une épaisse couverture Miocène et Plio-Quaternaire, et résultent de l'événement Messinien.
https://tel.archives-ouvertes.fr/tel-00936257

tel-00936257
https://tel.archives-ouvertes.fr/tel-00936257
https://tel.archives-ouvertes.fr/tel-00936257/document
https://tel.archives-ouvertes.fr/tel-00936257/file/thA_se_husson_couleurs.pdf

Éditeur(s) : HAL CCSD
Résumé : In this paper we define the $p$-density of a finite subset $Dsubsetma{N}^r$, and show that it gives a good lower bound for the $p$-adic valuation of exponential sums over finite fields of characteristic $p$. We also give an application: when $r=1$, the $p$-density is the first slope of the generic Newton polygon of the family of Artin-Schreier curves associated to polynomials with their exponents in $D$.
https://hal.archives-ouvertes.fr/hal-00551478

hal-00551478
https://hal.archives-ouvertes.fr/hal-00551478
ARXIV : 0812.3382

Éditeur(s) : HAL CCSD
Résumé : The Voronoi diagram of a finite set of objects is a fundamental geometric structure that subdivides the embedding space into regions, each region consisting of the points that are closer to a given object than to the others. We may define many variants of Voronoi diagrams depending on the class of objects, the distance functions and the embedding space. In this paper, we investigate a framework for defining and building Voronoi diagrams for a broad class of distance functions called Bregman divergences. Bregman divergences include not only the traditional (squared) Euclidean distance but also various divergence measures based on entropic functions. Accordingly, Bregman Voronoi diagrams allow to define information-theoretic Voronoi diagrams in statistical parametric spaces based on the relative entropy of distributions. We define several types of Bregman diagrams, establish correspondences between those diagrams (using the Legendre transformation), and show how to compute them efficiently. We also introduce extensions of these diagrams, e.g. k-order and k-bag Bregman Voronoi diagrams, and introduce Bregman triangulations of a set of points and their connexion with Bregman Voronoi diagrams. We show that these triangulations capture many of the properties of the celebrated Delaunay triangulation. Finally, we give some applications of Bregman Voronoi diagrams which are of interest in the context of computational geometry and machine learning.
https://hal.inria.fr/inria-00137865

Report N° : RR-6154
inria-00137865
https://hal.inria.fr/inria-00137865
https://hal.inria.fr/inria-00137865v2/document
https://hal.inria.fr/inria-00137865/file/bregman.pdf

Éditeur(s) : HAL CCSD
Résumé : Different applications of linear elasticity in structural geology are presented in this thesis through the development of three types of numerical computer codes. The first one uses forward modeling to study displacement and perturbed stress fields around complexly faulted regions. We show that incorporating inequality constraints, such as static Coulomb friction, enables one to explain the angle of initiation of jogs in extensional relays. Adding heterogeneous material properties and optimizations, such as parallelization on multicore architectures and complexity reduction, admits more complex models. The second type deals with inverse modeling, also called parameter estimation. Linear slip inversion on faults with complex geometry, as well as paleo-stress inversion using a geomechanical approach, are developed. The last type of numerical computer code is dedicated to restoration of complexly folded and faulted structures. It is shown that this technique enables one to check balanced cross-sections, and also to retrieve fault chronology. Finally, we show that this code allows one to smooth noisy 3D interpreted faulted and folded horizons using geomechanics.
Différentes applications de l'élasticité linéaire en géologie structurale sont présentées dans cette thèse à travers le développement de trois types de codes numériques. Le premier utilise la modélisation directe pour étudier les déplacements et champs de contraintes autour de zones faillées complexes. On montre que l'ajout de contraintes inégalitaires, telles que la friction de Coulomb, permet d'expliquer l'angle d'initiation des dominos dans les relais extensifs. L'ajout de matériaux hétérogènes et d'optimisations, telles la parallélisation sur processeurs multi-coeurs ainsi que la réduction de complexité des modèles, permettent l'étude de modèles beaucoup plus complexes. Le second type de code numérique utilise la modélisation inverse, aussi appelée estimation de paramètres. L'inversion linéaire de déplacements sur les failles ainsi que la détermination de paléo-contraintes utilisant une approche géomécanique sont développées. Le dernier type de code numérique concerne la restauration de structures complexes plissées et faillées. Il est notamment montré qu'une telle méthode permet de vérifier l'équilibre de coupes géologiques, ainsi que de retrouver la chronologie des failles. Finalement, nous montrons que ce même code permet de lisser des horizons 3D faillés, plissés et bruités en utilisant la géomécanique.
https://tel.archives-ouvertes.fr/tel-00537899

tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899/document
https://tel.archives-ouvertes.fr/tel-00537899/file/thesemaerten.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Lead in homes is a well-known source of childhood lead exposure,which is still of concern due to the health effects of low lead doses. This study aims to describe lead contamination in the homes of children aged 6 months to 6 years in France (without overseas). Between October 2008 and August 2009 ,484 housing units were investigated. Lead in tap water and total and leachable lead levels from floor dust, outdoor soils and paint chips were measured. X-ray fluorescence measurements were carried out on non-metallic and metallic substrates. Nationwide results are provided. The indoor floor dust lead (PbD) geometric mean (GM) was 8.8 microg/m2 (0.8 microg/ft2) and 6.8 mmicrog/m2 (0.6 mg/ft2) for total and leachable lead respectively; 0.21% of homes had an indoor PbD loading above 430.5 microg/m2 (40 microg/ft2). The outdoor play area concentration GM was 33.5microg/kg and 21.7microgkg in total and leachable lead respectively; 1.4% of concentrations were higher than or equal to 400microg/kg. Outdoor floor PbD GM was 44.4 mg/m2 (4.1 mg/ft2) that was approximately 3.2 times higher than the GM of indoor PbD. Lead-based paint (LBP) was present in 25% of dwellings, LBP on only non-metallic substrates was present in 19% of homes and on metallic substrates in 10% of dwellings. The GM of lead concentrations in tap water was below 1 microg/L; 58% of concentrations were lower than 1 microg/L and 2.9% were higher than or equal to 10 mg/L. The age cut-off for homes with lead would be 1974 for paint and 1993 for indoor floor dust. This study provides, for the first time, a look at the state of lead contamination to which children are exposed in French housing. Moreover, it provides policy makers an estimate of the number of French dwellings sheltering children where abatement should be conducted.
Environmental Research

hal-00714516
https://hal.archives-ouvertes.fr/hal-00714516

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The hydraulic and electrical properties of pyroclastic rocks have been investigated in laboratory on a representative sampling of Montagne Pelée (Martinique, France) deposits with renewed interest in geophysical applications. This sampling covers all the lithologic units of this volcano: lava dome and lava flows, pumices from ash-and-pumice fall and flow deposits, lava blocks from block-and-ash flow and Peléean “nuées ardentes” deposits, scoriae from scoria flow deposits. The connected porosity varies over a wide range from 3 to 62%. The unconnected porosity is important only on pumices where it can reach 15%. The permeability covers more than 5 orders of magnitude, ranging from 10−16 to 35 × 10−12 m2. The higher values are obtained on lava blocks and the scoriae, even if these rocks are less porous than the pumices. The formation factor ranges from 7 to 1139. The transport properties of these rocks are slightly correlated with porosity. This indicates that these properties are not only controlled by the connected porosity. To connect the transport properties to the textural characteristics of the pore network of pyroclastic rocks, different models, based on geometrical considerations or percolation theory, were tested. The pore access radius distribution and the tortuosity control the transport properties of pyroclastic rocks. Consequently, the models (electric and hydraulic) based on the concept of percolation (e.g., the models of Katz and Thompson), apply better than the equivalent channel model of Kozeny-Carman. In addition, the difference in transport properties observed on lava blocks and pumices confirms that the mechanisms of degassing and vesiculation are different for these two types of rock.
ISSN: 2169-9313

hal-00310237
https://hal.archives-ouvertes.fr/hal-00310237
DOI : 10.1029/2006JB004385, 2007

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
In this study, a novel application of a statistical approach is utilized for analysis of downhole logging data from Miocene-aged siliciclastic shelf sediments on the New Jersey Margin (eastern USA). A multivariate iterative nonhierarchical cluster analysis (INCA) of spectral gamma-ray logs from Integrated Ocean Drilling Program (IODP) Expedition 313 enables lithology within this siliciclastic succession to be inferred and, through comparison with the 1311 m of recovered core, a continuous assessment of depositional sequences is constructed. Signifi cant changes in INCA clusters corroborate most key stratigraphic surfaces interpreted from the core, and this result has particular value for surface recognition in intervals of poor core recovery. This analysis contributes to the evaluation of sequence stratigraphic models of large-scale clinoform complexes that predict depositional environments, sediment composition, and stratal geometries in response to sea-level changes. The novel approach of combining statistical analysis with detailed lithostratigraphic and seismic refl ection data sets will be of interest to any scientists working with downhole logs, especially spectral gamma-ray data, and also provides a reference for the strengths and weaknesses of multi component analysis applied to continental margin lithofacies. The method presented here is appropriate for evaluating successions elsewhere and also has value for hydrocarbon exploration where sequence stratigraphy is a fundamental tool.
EISSN: 1553-040X

insu-00858238
https://hal-insu.archives-ouvertes.fr/insu-00858238
DOI : 10.1130/GES00913.1

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD Cambridge Scientific Publishers Ltd
Résumé : International audience
https://hal.univ-antilles.fr/hal-01529538
Pointe-à-Pitre, Guadeloupe

ISBN : 1-904868-31-2
hal-01529538
https://hal.univ-antilles.fr/hal-01529538

Éditeur(s) : HAL CCSD Coastal Education and Research Foundation
Résumé : The present work concerns cuspate spits: slightly symmetrical geomorphic features growing along the shoreline in shallow waters. We develop a new formulation for the dynamics of cuspate spits. Our approach relies on classical paradigms such as a conservation law to the shoreface scale and an explicit formula for alongshore sediment transport. We derive a non-linear diffusion equation and a fully explicit solution for the growth of cuspate spits. From this general expression, we found interesting applications to quantify shoreline dynamics in the presence of cuspate spits. In particular, we point out a simple method for the datation of a cuspate spit given a limited number of input parameters. Furthermore, we develop a method to quantify the mean alongshore diffusivity along a shoreline perturbed by well-defined cuspate spits of known sizes. Finally, we introduce a formal relationship between the geometric characteristics (amplitude, length) of cuspate spits, which reproduce the self-similarity of these geomorphic features.
ISSN: 0749-0208

hal-01234952
https://hal.archives-ouvertes.fr/hal-01234952
DOI : 10.2112/SI70-009.1

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : HAL CCSD Elsevier
Résumé : Ethnopharmacological relevance: Cutaneous and mucocutaneous leishmaniasis are neglected tropical diseases that occur in all intertropical regions of the world. Amazonian populations have developed an abundant knowledge of the disease and its remedies. Therefore, we undertook to review traditional antileishmanial plants in Amazonia and have developed new tools to analyze this somewhat dispersed information.Material and methods: A literature review of traditional remedies for cutaneous/mucocutaneous leishmaniasis in the Amazon was conducted and the data obtained was used to calculate distribution indexes designed to highlight the most relevant uses in Amazonia. The cultural distribution index represents the distribution rate of a given taxon among different cultural groups and was calculated as the ratio of the number of groups using the taxon to the total number of groups cited. The geographical distribution index allowed us to quantify spatial distribution of a taxon's uses in Amazonia and was calculated geometrically by measuring the average distance between the points where uses have been reported and the barycenter of those points. The general distribution index was defined as an arithmetic combination of the previous two and provides information on both cultural and spatial criteria.Results: 475 use reports, concerning 291 botanical species belonging to 83 families have been gathered depicted from 29 sources. Uses concern 34 cultural groups. While the use of some taxa appears to be Pan Amazonian, some others are clearly restricted to small geographical regions. Particular attention has been paid to the recipes and beliefs surrounding treatments. Topical application of the remedies dominated the other means of administration and this deserves particular attention as the main treatments against Neotropical leishmaniasis are painful systemic injections. The data set was analyzed using the previously defined distribution indexes and the most relevant taxa were further discussed from a phytochemical and pharmacological point of view.Conclusions: The Amazonian biodiversity and cultural heritage host a fantastic amount of data whose systematic investigation should allow a better large-scale understanding of the dynamics of traditional therapies and the consequent discovery of therapeutic solutions for neglected diseases. Distribution indices are indeed powerful tools for emphasizing the most relevant treatments against a given disease and should be very useful in the meta-analysis of other regional pharmacopeia. This focus on renowned remedies that have not yet benefitted from extended laboratory studies, could stimulate future research on new treatments of natural origin for leishmaniasis.
ISSN: 0378-8741

hal-01603285
https://hal.archives-ouvertes.fr/hal-01603285
DOI : 10.1016/j.jep.2017.01.048
PRODINRA : 401890

Éditeur(s) : HAL CCSD
Résumé : International audience
The present work concerns cuspate spits: slightly symmetrical geomorphic features growing along the shoreline in shallow waters. We develop a new formulation for the dynamics of cuspate spits. Our approach relies on classical paradigms such as a conservation law to the shoreface scale and an explicit formula for alongshore sediment transport. We derive a non-linear diffusion equation and a fully explicit solution for the growth of cuspate spits. From this general expression, we found interesting applications to quantify shoreline dynamics in the presence of cuspate spits. In particular, we point out a simple method for the datation of a cuspate spit given a limited number of input parameters. Furthermore, we develop a method to quantify the mean alongshore diffusivity along a shoreline perturbed by well-defined cuspate spits of known sizes. Finally, we introduce a formal relationship between the geometric characteristics (amplitude, length) of cuspate spits, which reproduce the self-similarity of these geomorphic features.
13th International Coastal Symposium
Durban, South Africa

hal-01006569
https://hal.archives-ouvertes.fr/hal-01006569
https://hal.archives-ouvertes.fr/hal-01006569/document
https://hal.archives-ouvertes.fr/hal-01006569/file/JCR_SI_70_009_Bouchette_et_al.pdf