Éditeur(s) : HAL CCSD Springer/Terra Scientific Publishing Company
Résumé : International audience
We report oil the discovery of magnetite nanoparticles ranging in size from 2 to 14 full in the mineralized zones of the Pena Colorada iron-ore deposit, southern Mexico. Micrometric scale magnetite was magnetically reduced and divided into distinct size ranges: 85-56 mu m, 56-30 mu m, 30-22 mu m, 22-15 mu m, 15-10 mu m, 10-7 mu m and 7-2 mu m. Nanometric-scale magnetite in the size range 2-14 nm was identified. The magnetite was characterized by X-ray diffraction, transmitted and reflected light microscope, high-resolution transmission electron microscopy (TEM), high angle annular dark field, Mossbauer spectroscopy and its magnetic properties. Crystallographic identification of nanostructures Was performed using high-resolution TEM. Characteristic changes were observed when the particles make the size transition from micro- to nanometric sizes, as follows: (1) frequency-dependent magnetic Susceptibility percentage (chi FD%) measurements Show high Values (13%) for the 2-14 nm fractions attributed to dominant fractions of superparamagnetic particles; (2) variations of chi FD% < 4.5% in fractions of 56-0.2 mu m occur in association with the presence of microparticles formed by magnetite aggregates of nanoparticles (< 15 nm) embedded in berthierine; (3) Mossbauer spectroscopy results identified a superparamagnetic fraction; (4) nanometric and 0.2-3 mu m grain size magnetite particles require a magnetic field up to 152 mT to reach saturation during the isothermal remanent magnetization experiment; (5) coercivity and remanent magnetization of the magnetite increase when the particle size decreases, probably due to parallel Coupling effects; (6) two-magnetic Susceptibility versus temperature experiments of the same 2-14 nm sample show that the reversibility during the second heating is due to the formation of new magnetite nanoparticles and growth of those already present. during the first heating process.
ISSN: 1343-8832

hal-00413053
https://hal.archives-ouvertes.fr/hal-00413053

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : A differential effective medium (DEM) model is used to predict elastic properties for a set of porous and anisotropic aggregates, comprised of mixtures of calcite and muscovite. The DEM takes into consideration an anisotropic background medium with triclinic or higher symmetry, in which inclusions of idealized ellipsoidal shape are added incrementally. In general, the calculated elastic properties of a solid that contains inclusions representing "dry" pores/cracks are strongly dependent on the orientation and aspect ratio of the inclusions. Aspect ratios of inclusions in the synthetic aggregates, which consist of air-filled pores, are estimated from anisotropy of magnetic susceptibility (AMS) of samples whose pore space has been impregnated with a colloidal ferrofluid. The AMS derived pore shape geometry is used as an input value for inclusions in the DEM. Modeling results are compared with laboratory determined elastic properties, measured with ultrasonic waves. Calculated shear wave velocities agree in general well with laboratory measured S wave velocities, whereas calculated P wave velocities are typically 0.5-1.1 km/s higher than measured values. Differences between calculated and measured P wave velocities are attributed mainly to incomplete and biased ferrofluid saturation of pores. Spherical pores are preferably filled during imbibition, in comparison to thin cracks, which leads to overprediction of the calculated P wave velocities. The amount of ferrofluid that fills the pore space is dependent on the ratio of calcite to muscovite and the load used for compaction during sample synthesis. The permeability decreases with increasing muscovite content and increasing compaction load. Incomplete saturation of samples with high-muscovite content is confirmed by X-ray microtomography density contrast imaging of dry and ferrofluid saturated specimens.
ISSN: 0148-0227

hal-00617717
https://hal.archives-ouvertes.fr/hal-00617717
DOI : 10.1029/2010JB007750

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the interactions between deformation and percolation of melt or fluids, as well as on the implications of these processes for the seismic properties of the mantle wedge. It is based on the analysis of spinel peridotites from the massif of Ronda (Spain) and two xenolith suites from active subduction zones (Kamchatka, Papua New Guinea). A coupled structural, petrological and geochemical study of these samples shows that they underwent a reactive percolation of melts or Si-rich fluids, which was synchronous to a deformation event occurring under high temperature and low stress conditions, consistent with the PT conditions at the base of the lithosphere or in the asthenosphere. This reactive percolation is responsible for enrichment in pyroxenes, mainly orthopyroxene, which is often localized in bands parallel to the high-temperature foliation. This enrichment is associated with grain size reduction and dispersion of the crystallographic orientation of olivine. The dominant slip system in olivine is {0kl}[100], which results in fast S-wave polarization parallel to the flow direction in the mantle. The decrease in the intensity of the olivine crystal preferred orientations associated with the enrichment in pyroxene results in significant decrease of the anisotropy that may induce an underestimation of the thickness of the anisotropic layer by up to 33%. The observed orthopyroxene enrichment also lowers the Vp/Vs ratio, but cannot explain Vp/Vs < 1.7 mapped locally in the fore-arc mantle in Japan and the Andes. Such low Vp/Vs ratios may however be explained by considering the intrinsic anisotropy of the peridotites, which is generally ignored in large-scale Vp/Vs ratio mapping of the mantle wedge. Infrared analyses show that olivine from the both xenolith collections contains less water than the theoretical saturation calculated for their estimated equilibrium temperature in the spinel stability field. These low water content are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at relatively low pressure and dehydration during exhumation of the xenoliths. These measured water contents as well as theoretical saturation estimations are not sufficient to change the dominant slip direction of in olivine from [100] to [001].
Ce travail apporte de nouvelles contraintes sur les interactions entre déformation et processus d'hydratation et de percolation de magma ou de fluides dans le manteau à l'aplomb d'une zone de subduction et leurs implications sur les propriétés sismiques dans le coin mantellique. Il se base sur l'analyse de péridotites à spinelle provenant du massif de Ronda (Espagne) et deux séries de xénolites issues de zones de subduction actives (Kamchatka, Papouasie-Nouvelle-Guinée). L'étude structurale, pétrologique et géochimique de ces échantillons montrent qu'ils ont subit une percolation réactive de magma ou de fluide synchrone d'une déformation de haute température basse contrainte cohérente avec les condition PT de la base de la lithosphère ou de l'asthénosphère. Cette percolation réactive est responsable d'un enrichissement en pyroxènes, qui est souvent localisé dans des bandes parallèles à la foliation. Cet enrichissement est associé à une dispersion de l'orientation cristallographique de l'olivine. Les systèmes de glissement dominant dans l'olivine sont dans tous les cas {0kl}[100], ce qui implique que la direction de polarisation rapide des ondes S dans la partie supérieure du coin mantellique est parallèle à la direction d'écoulement dans le manteau. La décroissance de l'intensité des OPR de l'olivine associée à l'enrichissement en pyroxènes a pour conséquence une réduction non négligeable de l'anisotropie sismique qui peut induire jusqu'à 33% d'erreur sur l'interprétation de l'épaisseur de la couche anisotrope. Un enrichissement en orthopyroxène peut aussi entraîner une baisse du rapport Vp/Vs, mais ne peut expliquer les rapports Vp/Vs <1,7 cartés dans certains avant-arcs. Cependant de telles valeurs peuvent être expliquées si l'anisotropie des péridotites du coin mantellique est prise en compte. Les analyses par spectroscopie infra-rouge montrent que les olivines des deux séries de xénolites étudiées contiennent moins d'eau que la saturation théorique calculée pour leurs températures d'équilibre dans le domaine du spinelle. Ces faibles concentrations en eau sont similaires à celles observées dans les olivines des péridotites à spinelle des autres zones de subduction. Elles enregistrent probablement la faible solubilité de l'eau dans l'olivine à des pressions relativement basses et la déshydratation au cours de l'exhumation des xénolites. Ces teneurs en eau mesurées ainsi que les estimations de la saturation théorique ne sont pas suffisantes pour changer la direction de glissement dominante dans l'olivine de [100] à [001].
https://tel.archives-ouvertes.fr/tel-00689832

tel-00689832
https://tel.archives-ouvertes.fr/tel-00689832
https://tel.archives-ouvertes.fr/tel-00689832/document
https://tel.archives-ouvertes.fr/tel-00689832/file/These-Soustelle2010.pdf

Éditeur(s) : HAL CCSD Society of Exploration Geophysicists
Résumé : low frequency seismic attenuation
International audience
The study of wave attenuation in partially saturated porous rocks over a broad frequency range provides valuable information about the fluid system of reservoirs, which are inherently multiple phase fluid system. Until now, not much laboratory data have been collected in the seismically relevant low frequency range and existing literature data on partially saturated rock are very limited. The main goal of our work is to experimentally measure the bulk seismic attenuation on fluid-bearing rocks, using natural rock samples in an efficient way at in situ conditions. We are currently fine-tuning our attenuation measurement prototype. Preliminary bench-top results are promising and show consistency with reported experimental data with dry, partially and fully fluid saturated rocks. Measurements with the machine are accurate and precise.
ISSN: 1052-3812

hal-00564863
https://hal.archives-ouvertes.fr/hal-00564863
DOI : 10.1190/1.3513397

Éditeur(s) : HAL CCSD Ferrata Storti Foundation
Résumé : International audience
The aim of the study was to determine the factors associated with resting and exercise-induced hemoglobin oxygen desaturation. The well-established six-minute walk test was conducted in 107 sickle cell children (50 with sickle hemoglobin C disease and 57 with sickle cell anemia) at steady state. Hemoglobin oxygen saturation was measured before and immediately after the six-minute walk test. Blood samples were obtained on the same day to measure hematologic and hemorheological parameters. Exercise-induced hemoglobin oxygen desaturation was defined as a drop in hemoglobin oxygen saturation of 3% or more at the end of the six-minute walk test compared to resting levels. No children with sickle hemoglobin C disease, but approximately 50% of children with sickle cell anemia showed mild or moderate oxygen desaturation at rest, which was independently associated with the percentage of reticulocytes. Exercise-induced hemoglobin oxygen desaturation was observed in 18% of children with sickle hemoglobin C disease and 34% of children with sickle cell anemia, and was independently associated with the six-minute walk test, acute chest syndrome rate and the strength of red blood cell aggregates in children with sickle cell anemia. No association was found in children with sickle hemoglobin C disease between exercise-induced hemoglobin oxygen desaturation and the measured parameters. Hemoglobin oxygen desaturation at rest was common in children with sickle cell anemia but not in children with sickle hemoglobin C disease, and was mainly associated with greater hemolysis. Physiological strain during exercise and red blood cell aggregation properties may predict the occurrence of exercise-induced hemoglobin oxygen desaturation in children with sickle cell anemia.
ISSN: 0390-6078

inserm-00838989
http://www.hal.inserm.fr/inserm-00838989
http://www.hal.inserm.fr/inserm-00838989/document
http://www.hal.inserm.fr/inserm-00838989/file/Waltz_et_al._Ferrata_Storti_Foundation.pdf
DOI : 10.3324/haematol.2013.083576

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A set of four reactive flow-through experiments at temperature T = 100 degrees C and total pressure P=12 MPa was performed in limestone reservoir samples. By using various ranging from 0.7 to 10 MPa, these experiments mimic mass transfers occurring (1) near the injection well, where the brine is almost saturated with CO2 (i.e. P-CO2 approximate to P), and (2) at increasing distances from the injection well, where the fluid displays lower values and higher divalent cation concentrations due rock dissolution along the fluid pathway. Results for P-CO2 = 10 MPa show non-uniform dissolution features associated with transport-controlled mass transfer, while reaction-controlled uniform dissolution is observed for P-CO2 = 2.5 MPa. The experiment with P-CO2 = 6 MPa allows investigating in detail the transition from transport-to reaction-controlled dissolution. Conversely, the experiment reproducing conditions far from the injection well (P-CO2 = 0.7 MPa), shows a decrease of porosity triggered by the precipitation of Mg-rich calcite. For all the dissolution experiments, the time-resolved porosity phi(t) can be modeled by a simple non-linear equation including parameters that characterise the dissolution regime triggered by the reactivity of the inlet fluid (measured by the Damkohler number, Da). Furthermore, all dissolution experiments display power scaling between permeability (k) and porosity (phi) with distinctly different scaling exponents characterising the reactivity of the fluid percolating the sample, independently from the decrease with time of the reactive surface area. It is shown also that dissolution at moderate positive values of Da seems the most efficient to increase permeability and promote a rapid spreading of the reaction front, while inducing minimal modification of the porosity in the vicinity of the CO2 injection well. These results can be used to parameterize the k-phi function for modeling the earliest dissolution processes occurring in the vicinity of the reaction front.
ISSN: 0009-2541

hal-00445277
https://hal.archives-ouvertes.fr/hal-00445277
DOI : 10.1016/j.chemgeo.2009.03.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : Primary arc melts may form through fluxed or adiabatic decompression melting in the mantle wedge, or via a combination of both processes. Major limitations to our understanding of the formation of primary arc melts stem from the fact that most arc lavas are aggregated blends of individual magma batches, further modified by differentiation processes in the sub-arc mantle lithosphere and overlying crust. Primary melt generation is thus masked by these types of second-stage processes. Magma-hosted peridotites sampled as xenoliths in subduction zone magmas are possible remnants of sub-arc mantle and magma generation processes, but are rarely sampled in active arcs. Published studies have emphasised the predominantly harzburgitic lithologies with particularly high modal orthopyroxene in these xenoliths; the former characteristic reflects the refractory nature of these materials consequent to extensive melt depletion of a lherzolitic protolith whereas the latter feature requires additional explanation.Here we present major and minor element data for pristine, mantle-derived, lava-hosted spinel-bearing harzburgite and dunite xenoliths and associated primitive melts from the active Kamchatka and Bismarck arcs. We show that these peridotite suites, and other mantle xenoliths sampled in circum-Pacific arcs, are a distinctive peridotite type not found in other tectonic settings, and are melting residues from hydrous melting of silica-enriched mantle sources. We explore the ability of experimental studies allied with mantle melting parameterisations (pMELTS, Petrolog3) to reproduce the compositions of these arc peridotites, and present a protolith (‘hybrid mantle wedge’) composition that satisfies the available constraints. The composition of peridotite xenoliths recovered from erupted arc magmas plausibly requires their formation initially via interaction of slab-derived components with refractory mantle prior to or during the formation of primary arc melts. The liquid compositions extracted from these hybrid sources are higher in normative quartz and hypersthene (i.e., they have a more silica-saturated character) in comparison with basalts derived from prior melt-depleted asthenospheric mantle beneath ridges. These primary arc melts range from silica-rich picrite to boninite and high-Mg basaltic andesite along a residual spinel harzburgite cotectic. Silica enrichment in the mantle sources of arc-related, subalkaline picrite-boninite-andesite suites coupled with the amount of water and depth of melting, are important for the formation of medium-Fe (‘calc-alkaline’) andesite-dacite-rhyolite suites, key lithologies forming the continental crust.
ISSN: 0016-7037

hal-01553520
https://hal.archives-ouvertes.fr/hal-01553520
DOI : 10.1016/j.gca.2016.09.030

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Arenal volcano is nearly unique among arc volcanoes with its 42 year long (1968–2010) continuous, small-scale activity erupting compositionally monotonous basaltic andesites that also dominate the entire, ~7000 year long, eruptive history. Only mineral zoning records reveal that basaltic andesites are the result of complex, open-system processes deriving minerals from a variety of crystallization environments and including the episodic injections of basalt. The condition of the mafic input as well as the generation of crystal-rich basaltic andesites of the recent, 1968–2010, and earlier eruptions were addressed by an experimental study at 200 MPa, 900–1,050 °C, oxidizing and fluid-saturated conditions with various fluid compositions [H2O/(H2O + CO2) = 0.3–1]. Phase equilibria were determined using a phenocryst-poor (~3 vol%) Arenal-like basalt (50.5−wt% SiO2) from a nearby scoria cone containing olivine (Fo92), plagioclase (An86), clinopyroxene (Mg# = 82) and magnetite (Xulvö = 0.13). Experimental melts generally reproduce observed compositional trends among Arenal samples. Small differences between experimental melts and natural rocks can be explained by open-system processes. At low pressure (200 MPa), the mineral assemblage as well as the mineral compositions of the natural basalt were reproduced at 1,000 °C and high water activity. The residual melt at these conditions is basaltic andesitic (55 wt% SiO2) with 5 wt% H2O. The evolution to more evolved magmas observed at Arenal occurred under fluid-saturated conditions but variable fluid compositions. At 1,000 °C and 200 MPa, a decrease of water content by approximately 1 wt% induces significant changes of the mineral assemblage from olivine + clinopyroxene + plagioclase (5 wt% H2O in the melt) to clinopyroxene + plagioclase + orthopyroxene (4 wt% H2O in the melt). Both assemblages are observed in crystal-rich basalt (15 vol%) and basaltic andesites. Experimental data indicate that the lack of orthopyroxene and the presence of amphibole, also observed in basaltic andesitic tephra units, is due to crystallization at nearly water-saturated conditions and temperatures lower than 950 °C. The enigmatic two compositional groups previously known as low- and high-Al2O3 samples at Arenal volcano may be explained by low- and high-pressure crystallization, respectively. Using high-Al as signal of deeper crystallization, first magmas of the 1968–2010 eruption evolved deep in the crust and ascent was relatively fast leaving little time for significant compositional overprint by shallower level crystallization.
ISSN: 0010-7999

hal-01115717
https://hal.archives-ouvertes.fr/hal-01115717
DOI : 10.1007/s00410-014-1040-4

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Electrical resistivity soundings are used by geophysicists to determine the structure and composition of the Earth's crust and mantle and to explore natural resources (ore, oil, gas, water). Their interpretations in terms of composition and in-situ physical conditions depend mainly on laboratory measurements of electrical conductivity of rocks at simulated crustal conditions of temperature, pressure, saturation and pore pressures. These measurements present a numbers of limitations, in particular, in the case where conductive pore fluids are present, as in the case of deep reservoir conditions, where temperature exceeds 250 A degrees C. Here, we present a new cell capable of measuring electrical conductivity of large saturated samples at confining pressure up to 200 MPa, pore pressure up to 50 MPa, and temperature up to 500 A degrees C. The measurement cell has been developed in a commercial, internally heated, gas pressure apparatus (Paterson press). It is based on the concept of "guard ring" electrode, which is adapted to samples that are jacketed by a very conductive, metallic material. Numerical modeling of the current flow in the electrical cell allowed defining the optimal cell geometry. Calibration tests have been performed on Fontainebleau sandstones saturated with electrolytes of different conductivities, up to 350 A degrees C. The resulting electrical formation factor and temperature dependence of electrical conductivity are in very good agreement with previous studies. This new cell will improve the exploration and exploitation of deep fluid reservoirs, as in unconventional, high enthalpy geothermal fields. In particular, the investigations address possible effects of fluid-rock interactions on electrical resistivity of a reservoir host rock.
ISSN: 0169-3913

hal-00681997
https://hal.archives-ouvertes.fr/hal-00681997
DOI : 10.1007/s11242-011-9846-2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The main goal of the monitoring stage of Carbon Capture and Storage (CCS) is to obtain an accurate estimation of the subsurface CO2 accumulation and to detect any possible leakage. Laboratory experiments are necessary to investigate the small scale processes governing the CO2–brine–rock interaction. They also provide a means to calibrate the results coming from field scale geophysical methods. In this work we set up an experimental system which is able to perform Electrical Resistivity Tomography (ERT) measurements on centimeter-scale rock samples at various P–T conditions. We present the results of two new experiments related to CO2 monitoring, performed on a cylindrical (4 × 8 cm) Fontainebleau rock sample. In the first one, we have quantified the CO2 saturation at different volume fractions, representing zones from a deep saline aquifer with varying degrees of saturation. In the second one, we have monitored and quantified the effect of CO2 dissolution in the brine at a pressure of 40 bar during eight days, emulating the invasion of CO2 into a shallow aquifer. Results highlight the importance of accounting for the contribution of surface conductivity in highly CO2-saturated regions, even in clay-free rocks, and also for brine conductivity variation due to CO2 dissolution. Ignoring any of these effects will end up in a CO2 saturation underestimation. We present a modified CO2 saturation equation to account for these two influences.
ISSN: 0926-9851

hal-01356323
https://hal.archives-ouvertes.fr/hal-01356323
DOI : 10.1016/j.jappgeo.2016.03.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Coastal aquifers often display seawater intrusion resulting in the formation of a salty water wedge progressing inland. This study investigates the mass transfers in the mixing zone at the freshwater-seawater interface where the water is out of equilibrium with the rock-forming carbonates. Investigations were conducted in two boreholes, separated by 5 m, at the Ses Sitjoles test site (Mallorca Island, Spain) where repeated electrical conductivity logs of the formation and the saturating fluid, as well as regular pore-water sampling and permanent downhole multi-parameter monitoring of the water were performed over a period of 9 a. In the mixing zone, the significant acidification, the calcite saturation index profile and the Ca concentration profile cannot be explained by conservative mixing nor by dissolution-precipitation reactions only. Conversely, the analysis of organic C content and of the distinctly different time-resolved pH profiles measured in the two boreholes suggests the development of perennial biomass that triggers calcite dissolution. Moreover, the presence of biomass seems to be correlated with the permeability and vertical connectivity at the meter-scale. It is speculated that the mechanism could be self-activated because the microbiological activity induces calcite dissolution and tends to increase porosity and permeability that favors biomass development.
ISSN: 0883-2927

hal-00937665
https://hal.archives-ouvertes.fr/hal-00937665
DOI : 10.1016/j.apgeochem.2013.09.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To understand the deep cycle of water, upper mantle water content and distribution between nominally anhydrous minerals (NAMs) and hydrous minerals (e.g., amphibole) must be constrained. We need then to understand H behaviour during mantle melting and metasomatism. Major, minor and trace element compositions including water contents were obtained on ten xenoliths of spinel-bearing peridotites from the Ray Pic locality, in the Southern part of the Massif Central (France). The sample suite investigated here is composed of rather fertile lherzolites (89.4 ≤ Fo ≤ 90.8%; 11.3 ≤ cr# in spinel ≤ 21.1%; 0.942 ≤ [Yb]cpx ≤ 1.90 ppm; cpx: clinopyroxene), which can be best explained by batch melting, with degree of melting between 3 and 10%. These xenoliths contain up to 8% modal amphibole. Three groups are defined as a function of the amphibole modal abundance (above or below 1%) and equilibrium temperature (above or below 1000 °C). Results show no clear positive correlation between modal metasomatism (amphibole) and incompatible element enrichment in cpx. Trace element compositions in cpx show strong enrichments of the most incompatible elements (e.g., (La/Sm)PM as high as 15.7; PM: normalised to primitive mantle values), but strong negative anomalies of the high field strength elements (e.g., (Th/Nb)PM as high as ~ 680). Such trace element fractionations are usually ascribed to the so-called carbonatitic metasomatism involving the percolation of small volume melts which are enriched in volatiles. The hydrogen concentrations in cpx range from 203 to 330 ppm wt. H2O, in orthopyroxene from 66 to 160 ppm wt. H2O and in olivine from 2 to 6 ppm wt. H2O. These values are within the common concentration range of other spinel-bearing peridotites. Amphiboles contain 1.9 ± 0.5 wt.% of H2O.The effect of metasomatism on water abundances in NAMs is not straightforward. Hydrous metasomatism (i.e., leading to the crystallisation of OH-bearing amphibole) has no effect on the water content of the co-existing NAMs. This suggests thus that the occurrence of hydrous minerals, such as amphibole, does not systematically imply that the coexisting NAMs are water-rich (saturated). Further, the percolation of volatile-rich small volume melts, which is fingerprinted by the strong enrichment of the incompatible elements, has also no clear effect on the water content of the NAMs. These data are thus difficult to reconcile with the admitted highly incompatible behaviour of H in upper mantle minerals.
ISSN: 0024-4937

hal-01278062
https://hal.archives-ouvertes.fr/hal-01278062
DOI : 10.1016/j.lithos.2015.08.013

Éditeur(s) : HAL CCSD
Résumé :   Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
Links between architectural stages of development (ASD), photosynthetic capacities and leaf characteristics in Tachigali melinonii (Caesalpiniaceae) were investigated in the tropical forest of French Guiana. Three ASD were sampled under three light conditions to elucidate the impact of ASD- and light-related changes on photosynthetic functional traits. Photosynthetic parameters (maximum rate in RubisCO carboxylation (Vcmax) and maximum rate of electron transport (Jmax) were estimated by adjusting a biochemical model (Farquhar et al., 1980) to response curves of CO2 assimilation rate to intercellular CO2 concentration, under saturated light. In addition, N and C foliar concentrations were analysed and N allocations to the carboxylation and bioenergetic processus of photosynthesis were calculated using the model of Niinemets and Tenhunen (1997). The variations in ecophysiological parameters observed were due to leaf anatomical and structural changes instead of changes in photosynthetic components, suggesting adjustments to light conditions. Tachigali melinonii thus appears to display morphological and anatomical plasticity at different ASDs and under different light conditions.
Une espèce forestière de Guyane Française, Tachigali melinonii (Caesalipiniaceae), a été choisie afin de regarder la variation des traits fonctionnels relatifs à la photosynthèse en fonction de la disponibilité en lumière et en fonction de son stade de développement architectural. Du fait du tempérament de l'espèce vis-à-vis de la lumière de type «struggling gambler» (ombrage nécessaire aux jeunes stades puis développement en pleine lumière), trois stades clefs de développement parmi la séquence de différenciation de l'espèce ainsi que trois environnements lumineux ont été choisis. Les capacités photosynthétiques foliaires ont été estimées à partir de l'ajustement de paramètres du modèle biochimique de photosynthèse foliaire (Farquhar et al. 1980) sur des courbes de réponses de l'assimilation de CO² (A) à des concentrations intracellulaires en CO² (Ci) croissantes, en condition de lumière saturante. La vitesse maximale de carboxylation Vcmax et le flux maximal d'électrons photosynthétiques Jmax ont ainsi été estimés et ensuite reliés aux caractéristiques structurales foliaires, notamment la concentration en azote, en carbone ainsi qu'avec la densité et l’épaisseur. Les fractions d'azote allouées aux processus photosynthétiques de carboxylation et de bioénergétique ont été calculées. Des variations, dues à un effet du stade de développement sur les paramètres étudiés ainsi qu’à un effet de la quantité de lumière disponible, ont été constatées. Ces variations sont surtout liées à des ajustements anatomiques et structuraux foliaires et non à des modifications de l’appareil photosynthétique. Tachigali melinonii semble donc modifier ses caractéristiques structurales foliaires en fonction de son stade de développement, ce qui suppose un contrôle ontogénique partiel, et en fonction de la disponibilité en lumière.
https://hal.archives-ouvertes.fr/hal-01189520

hal-01189520
https://hal.archives-ouvertes.fr/hal-01189520
PRODINRA : 44951

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The minerals constituting the Earth's upper mantle are nominally anhydrous silicates (NAMs). However they do contain hydrogen as a trace element, decorating point defects in their crystalline structure. Experimental petrology and mineralogy have quantified the maximum concentration under several compositional and thermodynamic conditions, but systematic studies on the hydrogen concentration in minerals from mantle-derived rocks have only recently been carried out. Here, we have compiled the distribution of hydrogen in upper mantle peridotite xenoliths, from which several conclusions can be drawn. NAMs from peridotite xenoliths contain a few ppm wt. H2O in their structure. From the current database, the hydrogen concentrations in olivine regularly increase with increasing depth. The amount of hydrogen in NAMs from peridotite xenoliths from subduction contexts is not higher than in other geological context for similar temperature and pressure conditions. The highest hydrogen concentrations is found in peridotitic olivines from cratonic mantle, and are likely due to the depth of origin. The increasing hydrogen concentration in olivine with increasing depth is likely controlled by the increase of H partitioning into olivine at the expense of orthopyroxene as imposed by a decrease in Al content in opx with depth. However, the sparse data could also indicate that the bulk hydrogen concentration slightly increases with depth > 150 km. In this case, it would suggest, locally (Udachnaya for example), a possible increase in water fugacity due to fluid saturation. Even if the most abundant mineral in mantle rocks is olivine, the bulk hydrogen concentration in peridotites is controlled by the amount of hydrogen stored in pyroxenes. However, hydrogen concentration in olivine remains crucial for consequences on physical properties such as rheology and electrical conductivity. Kinetics of hydrogen transport is reviewed and hydrous melt/fluid percolation appears necessary to homogenize the hydrogen distribution at km-scale. Sampling of natural rock specimens is currently biased (e.g., in favor of optically attractive samples) and needs improvement, which will be achieved by increasing sample diversity (all type of grain sizes, lithologies, geological settings) and size of rock samples, as well as advances in analytical techniques. Acquisition of high quality data will be achieved by studying the co-existing minerals in mantle specimens, exploring each sample by linear and mapping measurements, and using appropriate FTIR calibrations for polarized and unpolarized radiation.
ISSN: 0024-4937

hal-01306676
https://hal.archives-ouvertes.fr/hal-01306676
DOI : 10.1016/j.lithos.2015.11.012

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : Total mercury (HgT) and monomethylmercury (MMHg) were investigated in a tropical head watershed (1 km(2)) of French Guiana. The watershed includes a pristine area on the hill slopes and a former gold mined flat in the bottomland. Concentrations of dissolved and particulate HgT and MMHg were measured in rain, throughfall, soil water and at three points along the stream. Samples were taken in-between and during 14 storm events at the beginning and middle of the 2005 and 2006 rainy seasons. Dissolved and particulate HgT concentrations in the stream slightly increased downstream, while dissolved and particulate MMHg concentrations were low at the pristine sub-watershed outlet (median = 0.006 ng L-1 and 1.84 ng g(-1), respectively) and sharply increased at the gold mined flat outlet (median = 0.056 ng L-1 and 6.80 ng g(-1), respectively). Oxisols, which are dominant in the pristine area act as a sink of HgT and MMHg from rain and throughfall inputs. Hydromorphic soils in the flat are strongly contaminated with Hg (including Hg droplets) and their structure has been disturbed by former gold-mining processes, leading to multiple stagnant water areas where biogeochemical conditions are favorable for methylation. In the former gold mined flat high dissolved MMHg concentrations (up to 0.8 ng L-1) were measured in puddles or suboxic soil pore waters, whereas high dissolved HgT concentrations were found in lower Eh conditions. Iron-reducing bacteria were suggested as the main methylators since highest concentrations for dissolved MMHg were associated with high dissolved ferrous iron concentrations. The connection between saturated areas and stagnant waters with the hydrographic network during rain events leads to the export of dissolved MMHg and HgT in stream waters, especially at the beginning of the rainy season. As both legal and illegal gold-mining continues to expand in French Guiana, an increase in dissolved and particulate MMHg emissions in the hydrographic network is expected. This will enhance MMHg bio-amplification and present a threat to local populations, whose diet relies mainly on fish.
Water Research (0043-1354) (Pergamon-elsevier Science Ltd), 2011-04 , Vol. 45 , N. 8 , P. 2659-2669

Droits : 2011 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/00035/14628/12134.pdf
DOI:10.1016/j.watres.2011.02.022
http://archimer.ifremer.fr/doc/00035/14628/

Éditeur(s) : HAL CCSD
Résumé :   Diffusion du document : INRA Antilles-Guyane, UMR ECOFOG, F97387 Kourou, Guyane (France) Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
This work on tropic al humid forest of Paracou includes 16 permanent sample plots covering a total surface of 119 hectares. Ten hectares of them are taken up by floodplains which characteristic is a continuous no-deep underground water level with phases of strong surface water logging. Three items have been studied : (i) Checking that during dry season the maps of the underground water level including its limits are reliable, (ii) Characterising the most suitable ecological niches for certain species, (iii) Additional updating the floodplains characterisation by precisely analysing the chemical soil content as well as the physiological reaction of the Symphonia Globulifera . Checking the underground water level in dry season enabled to put down to a quite good measurement reliability by GIS. The classification ecological of species proposed in this work is based on the relative density in floodplain and drain soil very similar to that which concerns a surface located ten or more kilometres further. This lets us assess that this classification is of a good reliability as long as the climate conditions are quite similar to ours in Paracou. Furthermore the presence of pneumatophores in the Symphonia Globulifera is a good biological criterion as long as it shows a long time ground moisture saturation. By analysing the life litter and the soil we mentioned that the leaf content and the soil content indicate a better nutritional value (phosphorus, calcium and potassium) in the floodplains. For phosphorus the relation between the life litter and the soil results put forward that the Olsen method gives a better explanation of the real phosphorus availability for the trees.
Le dispositif de recherche sur la forêt tropicale humide de Paracou est composé de 16 parcelles permanentes couvrant au total 119 ha, dont 10 ha sont occupés par des bas-fonds, caractérisés par l'existence permanente d'une nappe peu profonde et par des périodes de fort engorgement en surface. Notre étude avait trois objectifs : (i) vérifier la fiabilité des cartes de la profondeur de nappe en saison sèche, qui délimitent ces bas-fonds, (ii) caractériser les préférences écologiques de quelques espèces et (iii) compléter la caractérisation des bas-fonds par l'analyse de la richesse chimique du sol et l'étude de la réaction physiologique du Symphonia globulifera. La vérification sur la profondeur de nappe en saison sèche a montré que les imprécisions des cartes étaient d'ampleur limitée, sans incidence forte par rapport à l'ensemble des données. Le classement écologique des espèces proposé dans cette étude, basé sur leurs densités relatives dans les bas-fonds et hors des bas-fonds, est très similaire à celui présenté par une autre étude, dans un dispositif situé à plusieurs dizaines de kilomètres. Cela suggère que ce classement a une bonne validité, tant que les conditions climatiques ne diffèrent pas trop de celles rencontrées à Paracou. Par ailleurs, la présence des pneumatophores du Symphonia globulifera est un bon critère biologique signalant un engorgement hydrique prolongé du sol. Au niveau des analyses de la litière et du sol, les teneurs foliaires et les teneurs dans le sol semblent indiquer que la nutrition en phosphore, calcium et potassium est meilleure en bas-fonds. Au niveau de la méthode de mesure du phosphore assimilable, les relations entre les résultats de la litière et celles du sol suggèrent que la méthode d'Olsen rend mieux compte de la disponibilité effective du phosphore pour les arbres de la forêt tropicale humide que la méthode de Duchaufour.
https://hal.archives-ouvertes.fr/hal-01189229

hal-01189229
https://hal.archives-ouvertes.fr/hal-01189229
PRODINRA : 17050

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we have presented a spectral and a multifractal analysis performed on 412 time series of wind speed data each of duration of 350 s and sampled at 20 Hz. The average spectrum for the wind speed displays a scaling behavior, in the inertial range, over two decades, with b ¼ 1:68 close to the Kolmogorov value À 5/3. A multifractal analysis has been motivated by the presence of scaling invariance in data set. Then we have considered their scaling properties in the framework of fully developed turbulence and multifractal cascades. The results obtained for wind speed confirm that the exponent scaling function z V ðqÞ is nonlinear and concave. This exponent characterizes the scaling functions in the inertial range indicating that the wind speed is intermittent and multifractal. Moreover the theoretical quadratic relation for lognormal multifractals is well fitted. We investigate the consequence for wind energy production: we generate stochastic simulations of a multifractal random walk, and using a power curve derived from experimental data, we generate the associated power time series. We show that, due to the saturation of the power curve for large speed values, when the input time series (turbulent wind speed) is multifractal, the output can be almost monofractal.
ISSN: 0167-6105

hal-01527886
https://hal.archives-ouvertes.fr/hal-01527886
DOI : 10.1016/j.jweia.2012.06.002

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
In this study we attempt to understand the water storage variations in a karst aquifer on the Larzac Plateau (South of France) using ground-based gravimetry. Surface to 60 m depth gravity measurements are performed three times a year since 2006 down a pothole, in complement to monthly absolute gravity (AG) measurements at three sites. The time variations of the surface to depth (STD) gravity differences are compared with the AG variations. Using a simple Bouguer plate model, we find that the STD gravity differences are very similar to the AG variations. The STD gravity differences are then used to determine apparent density values. These integrative density values are compared with measured grain densities from core samples to obtain an apparent porosity and saturation change representative of the investigated depth. The apparent porosity ranges from 4.8 to 7.3 per cent. We then discuss on the repartition of the apparent physical properties with respect to the epikarst and infiltration zone karst structures. We argue that AG and STD differences monitor epikarst water storage variations. Within this scope, we discuss the fact that seasonal scale water storage variation occurs predominantly in the epikarst.
ISSN: 0956-540X

hal-00413528
https://hal.archives-ouvertes.fr/hal-00413528
DOI : 10.1111/j.1365-246X.2009.04118.x

Éditeur(s) : HAL CCSD Integrated Ocean Drilling Program
Résumé : International audience
A detailed study of magnetic properties was carried out on ~60 samples from three holes cored during Integrated Ocean Drilling Program Expedition 324, Shatsky Rise. The measurements include scanning electron microscopy (SEM), hysteresis, and first-order reversal curve (FORC) diagrams, as well as measurements of susceptibility at high and low temperatures and variation of saturation isothermal magnetization at low temperature. SEM measurements show the presence of a complex mixture of Fe-Ti oxides with various Ti content x, which is confirmed by the measurements of susceptibility variation with temperature and low-temperature measurements. According to FORC diagrams, the magnetization is carried by single-domain to pseudosingle-domain grains.
ISSN: 1930-1014

hal-00795484
https://hal.archives-ouvertes.fr/hal-00795484
DOI : 10.2204/iodp.proc.324.201.2013

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
In the Dent Blanche Tectonic System, the Mont Morion biotite-bearing granite is a km-scale intrusion preserved in a low-strain volume. Zircon saturation thermometry suggests that it crystallised from a melt that reached about 800 °C. U–Pb zircon and allanite geochronology indicates crystallization of the magma in the Permian (290 ± 3 Ma; 280 ± 8 Ma, respectively). Migmatitic biotite-gneiss and amphibolite are found as xenoliths within the Mont Morion granite and constitute its country-rocks. In two samples of migmatitic biotite-gneiss zircon has metamorphic overgrowths that yield U–Pb ages of 285 ± 3 Ma and 281 ± 4 Ma, and are thus contemporaneous with the intrusion of the granite. The Mont Morion granite with its country-rocks of migmatitic biotite-bearing gneiss and amphibolite was thus emplaced at middle crustal levels while amphibolite facies metamorphism affected its country rocks. The magmatic and metamorphic record in the Mont Morion area reflects the high-temperature regime and lithospheric thinning of the Adriatic continental margin during Permian.
ISSN: 1661-8726

insu-01622179
https://hal-insu.archives-ouvertes.fr/insu-01622179
DOI : 10.1007/s00015-017-0284-1