Éditeur(s) : UF Libraries UF Libraries ( Gainesville, FL )
Résumé : Digitized with funding from the Digital Library of the Caribbean grant awarded by TICFIA.
North America -- Haiti -- Département de l'Ouest -- Port-au-Prince Arrondissement -- Port-au-Prince -- 115 Avenue Christophe
Caribbean

Droits : Copyright, Erich Kesse, 2008. May be used under terms of Creative Commons license allowing Attribution + Noncommercial + ShareAlike (by-nc-sa)

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Within the framework of the international field campaign COPS (Convective and Orographically induced Precipitation Study), a large suite of state-of-the-art meteorological instrumentation was operated, partially combined for the first time. This includes networks of in situ and remote-sensing systems such as the Global Positioning System as well as a synergy of multi-wavelength passive and active remote-sensing instruments such as advanced radar and lidar systems. The COPS field phase was performed from 01 June to 31 August 2007 in a low-mountain area in southwestern Germany/eastern France covering the Vosges mountains, the Rhine valley and the Black Forest mountains. The collected dataset covers the entire evolution of convective precipitation events in complex terrain from their initiation, to their development and mature phase until their decay. Eighteen Intensive Observations Periods with 37 operation days and eight additional Special Observations Periods were performed, providing a comprehensive dataset covering different forcing conditions. In this article, an overview of the COPS scientific strategy, the field phase, and its first accomplishments is given. Highlights of the campaign are illustrated with several measurement examples. It is demonstrated that COPS research provides new insight into key processes leading to convection initiation and to the modification of precipitation by orography, in the improvement of quantitative precipitation forecasting by the assimilation of new observations, and in the performance of ensembles of convection-permitting models in complex terrain.
ISSN: 0035-9009

hal-00565513
https://hal.archives-ouvertes.fr/hal-00565513
DOI : 10.1002/qj.752

Éditeur(s) : Cayenne : Imprimerie du gouvernement
Résumé : Année 1916
Siècle(s) traité(s) : 20
Droits : Domaine public
Provenance : Collectivité territoriale de Guyane. Bibliothèque Alexandre-Franconie
Permalien : http://www.manioc.org/patrimon/FRA11243
FRA11243

Éditeur(s) : HAL CCSD
Résumé : International audience
BACKGROUND: The effects of pressure-controlled (PC) ventilation on the ventilatory and haemodynamic parameters during laparoscopy procedures had not been carefully assessed. This prospective cross-over study was undertaken to compare how volume-controlled (VC) and PC modes could affect pulmonary mechanics, gas exchange, and cardiac function in patients undergoing laparoscopy. METHODS: Twenty-one patients undergoing laparoscopic urological procedures had their lungs ventilated at the beginning with VC ventilation. PC ventilation was instituted at the end of the VC sequence. Ventilator settings were adjusted to keep tidal volume, respiratory rate, and Fi(o(2)) constant in every mode. A complete set of ventilatory, haemodynamic, and gas exchange parameters was obtained under VC after 40 min of pneumoperitoneum and 20 min after switching for PC. Transoesophageal echocardiography was performed in order to evaluate systolic and diastolic function of the heart. RESULTS: When VC was switched to PC, peak airway pressure decreased [mean (sd) 32 (6) vs 27 (6) cm H(2)O; P < 0.0001], peak inspiratory flow increased [17 (3) vs 48 (8) litre min(-1); P < 0.0001), and dynamic compliance improved [+15 (8)%]. No difference was noted for static airway pressure, static compliance, and arterial oxygenation. No significant change could be demonstrated in the systolic [left ventricular end-systolic wall stress 66 (16) vs 63 (14) x 10(3) dyn cm(-2) m(-2)] or diastolic function [early diastolic velocity 10.3 (2.5) vs 10.5 (2.7) cm s(-1)]. CONCLUSIONS: In this study, no short-term beneficial effect of PC ventilation could be demonstrated over conventional VC ventilation in patients with pneumoperitoneum.
BJA

hal-00689758
https://hal.archives-ouvertes.fr/hal-00689758
DOI : 10.1093/bja/aem166
PUBMED : 17626027

Éditeur(s) : HAL CCSD International Union of Crystallography
Résumé : International audience
ISSN: 0021-8898

cea-01377306
https://hal-cea.archives-ouvertes.fr/cea-01377306
DOI : 10.1107/S0021889813027453

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD Universidad autonoma de Queretaro
Résumé : International audience
Algunos de los documentos realizados por o con la colaboración del Consejo de Europa han jugado un papel decisivo en la enseñanza de las lenguas extranjeras, contribuyendo por ejemplo a la introducción del enfoque comunicativo en los años 70, potencialmente más adaptado para favorecer la apropiación operacional de las lenguas y favorecer así mismo la libre circulación de las personas y de las ideas.En esta perspectiva se creó, bajo el liderazgo de John Trim, director del proyecto entre 1975 y 1997, un programa de referencialización para definir las necesidades lingüísticas de los diferentes grupos de aprendices (turistas, inmigrantes, comerciantes…) del cual nacieron Threshold Level (1975) para el inglés, Niveau Seuil (1976) para el francés, y luego Nivel Umbral para el castellano.Relataremos en esta contribución el pasaje de los niveles umbral al programa de “descripción de los niveles de referencia”, DNR, organizado por el Consejo de Europa, haciendo hincapié en la metodología transversal adoptada por los diferentes equipos europeos – análisis de corpus, benchmarking, ultimas teorías de la adquisición del lenguaje, pasaje de los descriptores al referencial, etc. la influencia del Marco europeo común de referencia para las lenguas -, el enfoque orientado a la acción, credibilidad social, autenticidad, etc., las diferentes publicaciones realizadas hoy en día en inglés, español, italiano, alemán y francés (referenciales, DVD…), y los casos específicos de Profile Deutsch, English profile y Un référentiel pour le français, A1-C2.
Revist@ UAQ virtual
Queretaro, Mexico

halshs-01398850
https://halshs.archives-ouvertes.fr/halshs-01398850
https://halshs.archives-ouvertes.fr/halshs-01398850/document
https://halshs.archives-ouvertes.fr/halshs-01398850/file/La_descripcion_y_la_especificacion_de_los%20niveles%20del%20Marco%20comun%20europeo%20para%20los%20idiomas%20aportes%20para%20una%20nueva%20dinamica.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
An intensive water vapour intercomparison effort, involving airborne and ground-based water vapour lidar systems, was carried out in the framework of the COPS experiment. The main objective of this paper is to provide accurate error estimates for these systems. Comparisons between the ground-based Raman lidar BASIL and the airborne CNRS DIAL (Differential Absorption Lidar) indicate a mean relative bias between the two sensors, calculated with respect to the mean value of −2.13% (−0.034 g kg−1) in the altitude region 0.5-3.5 km, while comparisons between BASIL and the airborne DLR DIAL lead to a mean relative bias of 1.87% (0.018 g kg−1) in this same altitude region. Comparisons between the ground-based UHOH DIAL and the CNRS DIAL indicate a bias of −3.2% (−0.37 × 1022 m−3) in the altitude range 1.5-4.5 km, while comparisons between the UHOH DIAL and the DLR DIAL indicate a bias of 0.83% (0.06 × 1022 m−3) in this same altitude range. Based on the available comparisons between the ground-based Raman lidar BERTHA and the CNRS DIAL, the mean relative bias is found to be −4.37% (−0.123 g kg−1) in the altitude region 0.5-4.5 km. Comparisons between the ground-based IGN Raman lidar and the CNRS DIAL indicate a bias of 3.18% (0.55 g kg−1) in the altitude range from 0.5 to 4.5 km, while comparisons between the CNRS DIAL and DLR DIAL result in a mean relative bias of 3.93% (1.1 × 1022 m−3) in the altitude interval 0.5-4.0 km. Based on the available statistics of comparisons, benefiting from the fact that the CNRS DIAL was able to be compared with all other lidar systems, and putting equal weight on the data reliability of each instrument, overall relative values for BASIL, BERTHA, IGN Raman lidar, UHOH DIAL, DLR DIAL, and CNRS DIAL, with respect to the mean value, are found to be −0.38, −2.60, 4.90, −1.43, −2.23 and 1.72%, respectively.
ISSN: 0035-9009

hal-00572576
https://hal.archives-ouvertes.fr/hal-00572576
DOI : 10.1002/qj.697

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The nucleation and growth processes of spherulitic alkali feldspar have been investigated in this study through X-ray microtomography and electron backscatter diffraction (EBSD) data. Here we present the first data on Shape Preferred Orientation (SPO) and Crystal Preferred Orientation (CPO) of alkali feldspar within spherulites. The analysis of synchrotron X-ray microtomography and EBSD datasets allowed us to study the morphometric characteristics of spherulites in trachytic melts in quantitative fashion, highlighting the three-dimensional shape, preferred orientation, branching of lamellae and crystal twinning, providing insights about the nucleation mechanism involved in the crystallization of the spherulites. The nucleation starts with a heterogeneous nucleus (pre-existing crystal or bubble) and subsequently it evolves forming “bow tie” morphologies, reaching radially spherulitic shapes in few hours. Since each lamella within spherulite is also twinned, these synthetic spherulites cannot be considered as single nuclei but crystal aggregates originated by heterogeneous nucleation. A twin boundary may have a lower energy than general crystal–crystal boundaries and many of the twinned grains show evidence of strong local bending which, combined with twin plane, creates local sites for heterogeneous nucleation.This study shows that the growth rates of the lamellae (10− 6–10− 7 cm/s) in spherulites are either similar or slightly higher than that for single crystals by up to one order of magnitude. Furthermore, the highest volumetric growth rates (10− 11–10− 12 cm3/s) show that the alkali feldspar within spherulites can grow fast reaching a volumetric size of ~ 10 μm3 in 1 s.
ISSN: 0024-4937

hal-01172356
https://hal.archives-ouvertes.fr/hal-01172356
DOI : 10.1016/j.lithos.2014.12.003

Éditeur(s) : HAL CCSD
Résumé : International audience
The hierarchical architecture of biopolymers induces remarkable behaviour. Wood mechanical properties mainly originate from the organization of wood tissue and interactions of cellwall components. The respective contribution on components inside those networks occurs at nanometric scale and still challenging to investigate in-situ. X-ray scattering techniques are now used as a routine technique to investigate internal organization of material components. For that purpose large-scale synchrotron facilities like ESRF offer leading X-ray sources capabilities (large energy range, high brilliance, high intensity, dedicated setups). ESRF's ID13 beamline serves high spacial resolution scanning setups to expertise in elastic scattering of monochromatic X-rays. Since analytical description of the scattering signal of cellulose have been well describe wood material benefit wide range of exposure conditions and sample environment. During this conference, we will present our achievements based on transverse sections of poplar specimens exposed to micrometric beam (1.2 μm side, 12.6 keV energy) to reveal crystalline cellulose distribution within wood tissue and to nanometric beam (100 nm side, 12 6 keV energy) to map the evolution of cellulose orientation within double cell wall over combined Wide-Angle (WAXS) and Small-Angle (SAXS) X-ray Scattering configuration. Within those setups hygrometric sample environment and stretching solicitations will be approached based on-going developments.
COST FP0802 Workshop 'Micro Characterisation of Wood Material'
Edimbourg, United Kingdom

hal-01113298
https://hal.archives-ouvertes.fr/hal-01113298

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Résumé : Publiée dans le cadre du premier Congrès international d'histoire coloniale à Paris
Siècle(s) traité(s) : 20
Droits : Domaine public
Provenance : Ville de Pointe-à-Pitre. Réseau des bibliothèques
Permalien : http://www.manioc.org/patrimon/PAP11103
PAP11103

Éditeur(s) : HAL CCSD Oxford University Press
Résumé : International audience
It was recently reported that the sizes of many mRNAs change when budding yeast cells exit mitosis and enter the meiotic differentiation pathway. These differences were attributed to length variations of their untranslated regions. The function of UTRs in protein translation is well established. However, the mechanism controlling the expression of distinct transcript isoforms during mitotic growth and meiotic development is unknown. In this study, we order developmentally regulated transcript isoforms according to their expression at specific stages during meiosis and gametogenesis, as compared to vegetative growth and starvation. We employ regulatory motif prediction, in vivo protein-DNA binding assays, genetic analyses and monitoring of epigenetic amino acid modification patterns to identify a novel role for Rpd3 and Ume6, two components of a histone deacetylase complex already known to repress early meiosis-specific genes in dividing cells, in mitotic repression of meiosis-specific transcript isoforms. Our findings classify developmental stage-specific early, middle and late meiotic transcript isoforms, and they point to a novel HDAC-dependent control mechanism for flexible transcript architecture during cell growth and differentiation. Since Rpd3 is highly conserved and ubiquitously expressed in many tissues, our results are likely relevant for development and disease in higher eukaryotes.
ISSN: 0305-1048

Droits : http://creativecommons.org/licenses/by/
hal-01122128
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01122128
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01122128/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01122128/file/The%20conserved%20histone%20deacetylase.pdf
DOI : 10.1093/nar/gku1185

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : The diamond anvil cell (DAC) is a fundamental device used to explore the properties of materials under extreme pressure and temperature (P/T) conditions. In the past years, simultaneous high P/T DAC experiments using the resistively heated DAC (RH-DAC) techniques have been developed for studying materials properties in a wide P/T range. However, the mechanical instability of metallic gaskets used for sample confinement at high P/T conditions remains a limiting factor for exploiting the accessible P/T range of the RH-DAC. In this study, we present a new gasket configuration that overcomes these limitations. It is based on an amorphous boron-epoxy mixture inserted in a rhenium gasket. We show how these gasket inserts stabilize the sample chamber over a wide P/T range, allowing monitoring sample properties using X-ray diffraction and absorption spectroscopy up to 50GPa and 1620K.
ISSN: 0895-7959

hal-01608425
https://hal.archives-ouvertes.fr/hal-01608425
DOI : 10.1080/08957959.2016.1245297
PRODINRA : 387347

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In the mid-afternoon of 15 July 2007, during the Convective and Orographically induced Precipitation Study (COPS), in a very warm and dry environment, an isolated, short-lived, deep convective system developed over the southern Black Forest. Most of the high-resolution, convection-permitting models involved in COPS were unable to capture this event whereas the Meso-NH forecast was quite skilful. To assess the Meso-NH performance further, the model results were carefully checked against the various and numerous COPS observations. In full agreement with clear-air radar observations, model results underlined the triggering role of a low-level convergence line that developed in the lee of the Feldberg. The main departure from the observations was found to be in the low-level moisture fields, which appeared significantly moister in the model than in the observations and also slightly moister than in the other models. Sensitivity studies showed that this departure from the observations was strongly controlled by the initial surface moisture conditions. When the surface moisture was reduced by 20% or replaced by the value derived from a different analysis, the evolution of the planetary boundary layer was more accurately represented while the storm evolution was still correctly captured. These results demonstrate that the quality of the initial forecast cannot be ascribed to the moist bias of the model. It could therefore be hypothesized that the key parameters for a satisfactory forecast of this event lie more in the ability of the model to reproduce the dynamical forcing accurately than in the characteristics of the air-mass instability.
ISSN: 0035-9009

hal-00554400
https://hal.archives-ouvertes.fr/hal-00554400
DOI : 10.1002/qj.710

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyzed twelve fault gouge samples from the Bogd fault in south-western Mongolia to understand the origin and behavior of clay minerals. The investigation relies on x-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high energy synchrotron x-ray diffraction methods to investigate microstructure and preferred orientation. Smectite (montmorillonite), illite-smectite mixed layers, illite-mica and kaolinite are the major clay components, in addition to quartz and feldspars, which are present in all samples. The observations suggest that the protoliths and the fault rocks were highly altered by fluids. The fluid-rock interactions allow clay minerals to form, as well as alter feldspars to precipitate kaolinite and montmorillonite. Thus, newly formed clay minerals are heterogeneously distributed in the fault zone. The decrease of montmorillonite component of some of the highly deformed samples also suggests that dehydration processes during deformation were leading to illite precipitation. Based on synchrotron x-ray diffraction data, the degree of preferred orientation of constituent clay minerals is weak, with maxima for (001) ranging from 1.3 to 2.6 multiples of a random distribution (m.r.d). Co-existing quartz and feldspars have random orientation distributions. Microstructure and texture observations of the gouges from the foliated microscopic zone, alternating with micrometric isotropic clay-rich area, also indicate that the Bogd fault experienced brittle and ductile deformation episodes. The clay minerals may contribute to a slip weakening behavior of the fault.
ISSN: 0191-8141

insu-00667194
https://hal-insu.archives-ouvertes.fr/insu-00667194
DOI : 10.1016/j.jsg.2011.10.006

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The Convective and Orographically-driven Precipitation Study (COPS) carried out in summer 2007 over northeastern France and southwestern Germany provided a fairly comprehensive description of the low-troposphere water-vapour field, thanks in particular to the deployment of two airborne differential absorption lidar systems. These lidar observations were assimilated using the 3D-Var assimilation system of the Application of Research to Operations at MEsoscale (AROME) numerical weather prediction mesoscale model. The assimilation was carried out for the period 4 July-3 August by running a three-hour forward intermittent assimilation cycle. First, the impact of the lidar observations was assessed by comparing the analyses with a set of more than 200 independent soundings. The lidar observations were found to have a positive impact on the analyses by reducing the dry bias in the first 500 m above ground level and by diminishing the root-mean-square error by roughly 15% in the first km. Then the impact of the lidar observations was assessed by comparing the precipitation forecasts (obtained with and without the lidar observations for the period 15 July-2 August) with the gridded precipitation observations provided by the Vienna Enhanced Resolution Analysis. In general, the impact was found to be positive but not significant for the 24 h precipitation and positive and significant for the 6 h precipitation, with an improvement lasting up to 24 h. Some selected case studies show that the improvement was obtained through a better depiction of convection initiation or through a more accurate positioning of the precipitation systems
ISSN: 0035-9009

hal-00659497
https://hal.archives-ouvertes.fr/hal-00659497
DOI : 10.1002/qj.1864

Éditeur(s) : Paris : Librairie commerciale

Droits : Domaine public
Provenance : Université de Nantes. Service commun de la documentation
Permalien : http://www.manioc.org/patrimon/NAN13059-1
NAN13059-1

Éditeur(s) : HAL CCSD springer Link
Résumé : International audience
Experimental Astronomy

hal-01094521
https://hal.archives-ouvertes.fr/hal-01094521
BIBCODE : 2014ExA...tmp...41R
DOI : 10.1007/s10686-014-9383-4
ARXIV : 1310.0696

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Tuftelin (TUFT1) is an acidic, phosphorylated glycoprotein, initially discovered in developing enamel matrix. TUFT1 is expressed in many mineralized and non-mineralized tissues. We performed an evolutionary analysis of 82 mammalian TUFT1 sequences to identify residues and motifs that were conserved during 220 million years (Ma) of evolution. We showed that 168 residues (out of the 390 residues composing the human TUFT1 sequence) are under purifying selection. Our analyses identified several, new, putatively functional domains and confirmed previously described functional domains, such as the TIP39 interaction domain, which correlates with nuclear localization of the TUFT1 protein, that was demonstrated in several tissues. We also identified several sites under positive selection, which could indicate evolutionary changes possibly related to the functional diversification of TUFT1 during evolution in some lineages. We discovered that TUFT1 and MYZAP (myocardial zonula adherens protein) share a common ancestor that was duplicated circa 500 million years ago. Taken together, these findings expand our knowledge of TUFT1 evolution and provide new information that will be useful for further investigation of TUFT1 functions.
ISSN: 0022-2844

hal-01516886
http://hal.upmc.fr/hal-01516886
http://hal.upmc.fr/hal-01516886/document
http://hal.upmc.fr/hal-01516886/file/Delgado_2017_Evolutionary.pdf
DOI : 10.1007/s00239-017-9789-5