Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A series of two-stage torsion experiments on Carrara marble were conducted to constrain the influence of known prior deformation on rheological response and microstructural evolution. Comparison with previous experimental data on Carrara marble flow and fabric evolution during single-stage torsion deformation experiments provided direct insights into the significance of initial deformation at various conditions. Our experiments were conducted at 727 degrees C temperature and 300 MPa confining pressure, while maintaining a constant strain rate of 3 x 10(-4) s(-1) on the periphery of the cylindrical samples. Under these conditions, the marble is known to deform in power-law (n = 6-10) ductile flow. All torsion experiments were performed with a Paterson type gas-medium testing machine equipped with a torsion actuator module.;Prior (D1) and subsequent (D2) deformation are accomplished by two torsion experiments in sequence on same sample segments. The effect of D1 strain history is investigated during D2 by applying counter-clockwise torsion to a sandwich sample consisting of three segments with different D1 rotation sense. D2 samples experienced continued, first and reversed shearing deformation in top, centre and bottom segments, respectively. D2 bulk strain was chosen equal to D1 strain in top and bottom segments.;D1 experiments followed the typical single-stage deformation behaviour of Carrara marble under the applied experimental conditions. Yielding was followed by strain hardening until a peak stress was reached at a shear strain around 1, after which work softening occurred. Weakening gradually evolved into a constant stress regime. During hardening, a shear microstructure and crystallographic preferred orientation (CPO) developed. Afterwards the volume fraction of smaller dynamic recrystallised grains increased continuously, resulting in a recrystallisation microstructure and CPO at shear strains of 5 and higher. The new D2 experiments displayed a strain variation between homogeneously deformed sample segments that increased with increasing D1 strain. The stress-strain behaviour of the D2 bulk sandwich samples showed less pronounced work-hardening and -softening when compared with single-stage deformation experiments. Furthermore, constant flow stress was attained at increasingly lower strain with increasing D1 strain. In most D2 segments, fabric development is equivalent to single-stage experiments at corresponding absolute strain. The fabrics differed markedly from those in single-stage experiments in the case of reversed two-stage deformation at moderate strain (D1 shear strain 1 and 2.6). Experiments show that grain shape by shearing of relict grains is defined by finite strain and thus affected by strain reversal. Recrystallisation is controlled by absolute strain and not influenced by strain reversal.
ISSN: 0040-1951

hal-00617686
https://hal.archives-ouvertes.fr/hal-00617686
DOI : 10.1016/j.tecto.2010.09.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We performed torsional deformation experiments on pre-hydrated fine-grained olivine aggregates using an innovative experimental assembly to investigate water weakening in mantle rocks at high shear strains. San Carlos olivine powder was cold-pressed and then hot-pressed under hydrous conditions, producing aggregates with average grain sizes of 7 or 15 μm. Deformation experiments were performed in a high-resolution gas-medium apparatus equipped with a torsional actuator, under a confining pressure of 300 MPa, a temperature of 1200 °C, and constant shear strain rates ranging from 8 × 10−5 to 1.4 × 10−4 s−1. Maximum shear stresses range from 150 to 195 MPa. These values are 30% lower relative to those determined in previous torsion experiments on dry, fined-grained dunites under similar conditions. Textures and microstructures of the starting and deformed specimens were characterized by scanning and transmission electron microscopy. All deformed aggregates exhibit a shape-preferred orientation marking a foliation and lineation, as well as a reduction in mean grain size from 15 μm down to 3-4 μm due to dynamic recrystallization. Olivine crystallographic fabrics developed rapidly (γ < 0.1), but their strength, characterized by the J-index, is low compared to naturally deformed peridotites or to polycrystalline olivine deformed at similar finite shear strains under dry conditions. The crystallographic fabrics are consistent with deformation by a dislocation accommodated creep mechanism with activation of multiple {0 k l}[1 0 0] systems, among which the (0 1 0)[1 0 0] slip system is dominant, and minor participation of the (0 1 0)[0 0 1] slip system. Transmission electron microscopy confirmed the occurrence of dislocations with [1 0 0] and [0 0 1] Burgers vectors in most grains. Analysis of unpolarized infrared spectra indicates that hydrogen concentration in the olivine lattice is below the saturation level of 18 ppm wt H2O, which is similar to those typically observed in spinel-bearing peridotite xenoliths, and also provide evidence for water-rich inter-granular material trapped in pores and grain boundaries. Seismic properties computed from the CPO observations correspond to those most commonly observed in naturally deformed mantle peridotites with fast P-wave propagation and S-wave polarization subparallel to the shear direction. These torsion experiments on fine-grained olivine polycrystals under hydrous conditions indicate that water weakening under lithospheric conditions is linked to various defects with hydrogen in the olivine structure, as well as with water-derived species in grain boundaries or pores.
ISSN: 0031-9201

hal-00745170
https://hal.archives-ouvertes.fr/hal-00745170
DOI : 10.1016/j.pepi.2012.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : Folds with hinge lines subparallel to stretching lineation are common features in shear zones and represent extreme cases of fold modification. However, their microstructures and in particular their kinematic significance remain poorly understood. Here we describe the meso- and micro-scale structures and crystallographic preferred orientation (CPO) of quartz and muscovite from a metric-scale shear-modified fold from Plattjen, Saas Fee, Western Internal Alps. The studied fold is of class-2 and the samples collected around the fold have essentially the same microstructures. Quartz [c]-axes plotted in the tectonic coordinate system exhibit an apparent reverse obliquity on opposing limbs. Muscovite fabrics are controlled essentially by the orientation of {001} planes. If the CPO data are plotted in a common reference frame (e.g. either fold or geographical), all samples exhibit essentially the same patterns for both minerals. In particular, relative to the fold axis and axial surface, the reversal of quartz CPO obliquity on opposing limbs is no longer evident. The small obliquity (~ 15°) between the intersection lineation of the two planes of {001} of muscovite and the fold axis results in the apparent reversal of shear sense on opposite limbs when viewing the CPO related to the macroscopic fabric. The homogeneity of the microstructures and CPOs of quartz and muscovite across the fold support the interpretation that the fold developed during simultaneous activation of heterogeneous and homogeneous simple shear, with the former responsible for fold development and the latter responsible for fold rotation and the overwhelming of the heterogeneous deformation. These processes led to the observed parallelism between fold hinge line and local stretching lineation.
ISSN: 0040-1951

hal-00824537
https://hal.archives-ouvertes.fr/hal-00824537
DOI : 10.1016/j.tecto.2011.03.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Tahalgha district (southwestern Hoggar, Algeria), the Cenozoic volcanism has sampled subcontinental mantle beneath two crustal terranes that collided during the Pan-African orogeny: the “Polycyclic Central Hoggar” to the east and the “Western Hoggar” to the west. Two major lithospheric shear zones separate these terranes: the “4°35” and the “4°50” faults. Mantle xenoliths were collected between the two faults and across the 4°35 fault. In addition to a range in equilibrium temperatures and chemical compositions reported elsewhere, the samples show variations in their microstructures and crystallographic preferred orientations. Equilibrium temperatures and geochemical characteristics allow dividing them into low — (LT; 700–900 °C), intermediate — (IT; 900–1000 °C), and high-temperature (HT; 1000–1100 °C) xenoliths. The LT and IT peridotites occur on both sides of the 4°35 fault; they are usually coarse-grained. HT xenoliths are present only east of the 4°35 fault, in the narrow domain stuck between the two faults; they are fine-grained and extensively affected by annealing and melt–rock reactions. Microstructures and crystallographic textures indicate that deformation in the LT- and IT-xenoliths occurred through dislocation creep under relatively high-temperature, low-pressure conditions, followed by post-kinematic cooling. The fine-grained HT-xenoliths were deformed under relatively high-stress conditions before being annealed.Combining microstructural and CPO data with petrological and geochemical informations suggests that: (1) the LT xenoliths are remnants of the Neoproterozoic lithospheric mantle that preserved microstructural and chemical characteristics inherited from the Pan-African orogeny, and (2) the HT xenoliths record localized Cenozoic deformation associated with melt channeling through feed-back processes that culminated in the formation of high-permeability porous-flow conduits. Limited grain-growth in HT xenoliths suggests that advective heating of melt conduits was transient and rapidly followed by thermal relaxation due to conductive heat loss into wall-rock peridotites represented by the IT xenoliths, then by exhumation due to volcanic activity.
ISSN: 0040-1951

hal-01171761
https://hal.archives-ouvertes.fr/hal-01171761
DOI : 10.1016/j.tecto.2014.11.012

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We present a new interpretation of anisotropy of magnetic susceptibility (AMS) fabrics in basaltic lava flows based on the detailed study of magnetic mineralogy and silicate crystallographic fabric of a Quaternary lava flow from the French Massif Central (La Palisse). We consider the model of AMS fabric imbrication between magnetic foliation and flow surface, as initially proposed for dykes. At the two sampling sites, the concordance between the flow direction deduced from the AMS foliation and that deduced from field observations indicates that the imbrication model could apply to the lava flows. However, the flow senses inferred fromAMSare systematically opposed between the two sampling sites suggesting permutations between K1 and K3 AMS axes, a configuration referred to as inverse fabric. Electron backscatter diffraction (EBSD) measurements show strong lattice-preferred orientations (LPO) for plagioclase, especially the (010) plagioclase plane, which tends to be parallel to the flow. Clinopyroxene LPO remains less marked than plagioclase LPO, whereas titanomagnetite does not display a significant LPO. Comparison between magnetic and crystallographic fabrics suggests that the AMS fabric of the lava flow results from the distribution of titanomagnetite grains, which is in turn controlled by the fabric of the silicate framework. Magnetic hysteresis parameters and anisotropy of remanent magnetization (ARM) measurements exclude a significant contribution from single-domain grains, often called upon to explain inverse magnetic fabrics. The origin of the observed inverse magnetic fabric may relate to the dip of the palaeosurface, which is the only remarkable difference between the two sampling sites. AMS appears as a good tool to determine the direction of basaltic lava flows and coupling with local crystallographic fabric data provides a valuable control of relationships between magnetic fabrics and flow and thus contributes to better constrain the AMS signature of lava flows.
ISSN: 0956-540X

hal-00903561
https://hal.archives-ouvertes.fr/hal-00903561
https://hal.archives-ouvertes.fr/hal-00903561/document
https://hal.archives-ouvertes.fr/hal-00903561/file/TB-GJI-193-2-Orig.pdf
DOI : 10.1093/gji/ggs115

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] The Pyrenees, north of the North Pyrenean fault, display a complex structure involving a succession of peridotite massifs, basement massifs, and mid-Cretaceous to Late Cretaceous basins located in a narrow domain, which was affected by a mid-Cretaceous, preorogenic, high-temperature, low-pressure metamorphism. The Late Cretaceous basins were interpreted either as pull-apart basins formed during transcurrent motion of Iberia relative to Eurasia or as remnants of a larger extensional basin. Recent models support that peridotite massifs result from the exhumation of the mantle during this preorogenic event. The northern boundary of the Agly basement massif shows evidence of ductile deformation of the basal formations of the Agly sedimentary cover. Macroscopic and microscopic kinematics indicators consistent with asymmetry of crystallographic fabrics suggest normal sense of shear and thus suggest detachment, at least partial, of the Mesozoic cover from its basement. Triassic to Early Cretaceous limestones are mylonitic and consistently shows a foliation, a NS- to NE-trending lineation, shear criteria suggesting top-to-the-north shearing and locally boudinage. At the microscopic scale, mylonites are characterized by a very fine grain size, frequently <10 µm. They contain larger, partially recrystallized calcite parent grains and undeformed quartz grains with calcite fringes crystallized in pressure shadows. In these mylonites, calcite systematically shows a weak but well-defined crystallographic-preferred orientations, suggesting HT dislocation creep combined to diffusion creep and possibly grain boundary sliding in the finest fraction of the mylonites. Paleotemperatures determined using Raman spectrometry suggest synkinematic temperature conditions in the range 340-390°C, in good agreement with observed microstructures and calcite CPO. The mylonitic fabric in Mesozoic limestones is folded by EW-trending Pyrenean folds north of the Agly basement massif, attesting that this fabric formed before the Pyrenean orogeny. These data consistently support preorogenic extension under medium-temperature conditions of the northern Agly massif and likely of the massif itself. Since simultaneously (~100 Ma) a mid-Cretaceous basin opened south of the basement massif, we suggest a model of preorogenic exhumation of the Agly massif in response to the regional extension associated to the rotation of Iberia. This model may explain the exhumation of the North Pyrenean massifs during a single preorogenic event that allowed the opening of extensional basins and the exhumation of the lithospheric mantle. All these structures being subsequently reworked during the Pyrenean orogeny.
ISSN: 0278-7407

hal-00852833
https://hal.archives-ouvertes.fr/hal-00852833
DOI : 10.1002/tect.20015

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
Thermoelastic behavior of different marble types was analyzed using computational modeling and experimental measurements. Eight marble samples with different composition, grain size, grain boundary geometry, and texture were investigated. Calcitic and dolomitic marbles were considered. The average grain size varies from 75 μm to 1.75 mm; grain boundary geometry differs from nearly equigranular straight grain boundaries to inequigranular-interlobate grain boundaries. Four typical marble texture types were observed by EBSD measurements: weak texture; strong texture; girdle texture and high-temperature texture. These crystallographic orientations were used in conjunction with microstructure-based finite element analysis to compute the thermoelastic responses of marble upon heating. Microstructural response maps highlight regions and conditions in the marble fabric that are susceptible to degradation phenomena. This behavior was compared to the measured thermal expansion behavior, which shows increasing residual strains upon repetitive heating-cooling cycles. The thermal expansion behavior as a function of temperature changes can be classified into four categories: (a) isotropic thermal expansion with small or no residual strain; (b) anisotropic thermal expansion with small or no residual strain; (c) isotropic thermal expansion with a residual strain; and (d) anisotropic thermal expansion with residual strain. Thermal expansion coefficients were calculated for both simulated and experimental data and also modeled from the texture using the MTEX software. Fabric parameters control the amount and directional dependence of the thermal expansion. Marbles with strong texture show higher directional dependence of the thermal expansion coefficients and have smaller microstructural values of the maximum principal stress and strain energy density, the main precursors of microcracking throughout the marble fabric. In contrast, marbles with weak texture show isotropic thermal expansion behavior, have a higher propensity to microcracking, and exhibit higher values of maximum principal stress and strain energy density. Good agreement between the experimental and computational results is observed, demonstrating that microstructure-based finite-element simulations are an excellent tool for elucidating influences of rock fabric on thermoelastic behavior.
ISSN: 1866-6280

hal-00858095
https://hal.archives-ouvertes.fr/hal-00858095
DOI : 10.1007/s12665-013-2406-z

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 1415 m deep IODP Hole U1309D (Mid-Atlantic Ridge, 30 degrees N) is the second deepest hole drilled into slow spreading oceanic lithosphere. The recovered section comprises essentially gabbroic rocks, with a large range of compositions. The most primitive end-members of the gabbroic sequence, herein referred to as olivine-rich troctolites (ol > similar to 70%), have textures and geochemical compositions intermediate between that of mantle peridotites and primitive cumulates, indicative of melt impregnation processes. We carried out a detailed microstructural study to further characterize the petrogenetic processes leading to their formation, as well as discuss their mode of emplacement and relationship with neighboring mantle lithosphere. In olivine-rich troctolites, olivines range from coarse-grained subhedral crystals, commonly containing well-developed subgrains, to medium-grained rounded crystals with fewer or no substructures. They are embedded in large, undeformed pyroxene and plagioclase poikiloblasts. Olivine substructures reveal dislocation creep that is consistent with activation of the main high-temperature slip systems, dominantly (010)[100]. Olivine crystallographic preferred orientation is very weak but generally shows a relatively stronger, uncommon [001] concentration. These unusual olivine fabrics are interpreted as resulting from melt impregnation of a previously deformed olivine matrix: the solid olivine framework is disrupted by olivine corrosion along grain and subgrain boundaries, and the high-temperature plastic fabric is modified in a liquid-dominated regime. Based on mineral composition and fabrics and in comparison with what is observed in impregnated mantle rocks elsewhere, we posit that olivine represents relicts of mantle peridotites disaggregated by large melt influx, although the mantle origin of olivine is not unequivocally demonstrated yet. Whatever the initial lithology, impregnation by large volumes of melt has strongly modified the original composition and microstructure. If the mantle origin hypothesis is correct, the original olivine fabric could have been efficiently weakened by dunitization prior to disruption of the olivine framework by melt impregnation. Incorporation, at the base of the lithosphere, of small slivers of impregnated dunite into gabbroic sections, trapped between successive igneous units, may be a common mechanism of lower crustal accretion at slow spreading ridges. Extensive melt-rock interaction processes are expected to contribute significantly to the final chemical composition of erupted lavas.
ISSN: 1525-2027

hal-00496391
https://hal.archives-ouvertes.fr/hal-00496391
DOI : 10.1029/2009GC002995

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : This study presents a unique database of 172 plagioclase Crystallographic Preferred Orientations (CPO) of variously deformed gabbroic rocks. The CPO characteristics as a function of the deformation regime (magmatic or crystal-plastic) are outlined and discussed. The studied samples are dominantly from slow- and fast-spread present-day ocean crust, as well as from the Oman ophiolite. Plagioclase is the dominant mineral phase in the studied samples. Plagioclase CPOs are grouped into three main categories: Axial-B, a strong point alignment of (010) with a girdle distribution of [100]; Axial-A, a strong point maximum concentration of [100] with parallel girdle distributions of (010) and (001); and P-type, point maxima of [100], (010), and (001). A majority of CPO patterns are Axial-B and P-type, in samples showing either magmatic or crystal-plastic deformation textures. Axial-A CPOs are less common; they represent 21% of the samples deformed by crystal-plastic flow. Although fabric strength (ODF J index) does not show any consistent variation as a function of the CPO patterns, there is a significant difference in the relationship between the ODF and pole figures J indices; the magmatic type microstructures have high (010) pole figures J indices, which increase linearly with ODF J index, whereas the high [100] pole figures J indices of plastically deformed samples vary in a more scattered manner with ODF J index. The multistage nature of plastic deformation superposed on a magmatic structure compared with magmatic flow, and the large number of possible slip-systems in plagioclase probably account for these differences. Calculated seismic properties (P wave and S wave velocities and anisotropies) of plagioclase aggregates show that anisotropy (up to 12% for P wave and 14% for S wave) tends to increase as a function of ODF J index. In comparison with the olivine 1998 CPO database, the magnitude of P wave anisotropy for a given J index is much less than olivine, whereas it is similar for S wave anisotropy. Despite a large variation of fabric patterns and geodynamic setting, seismic properties of plagioclase-rich rocks have similar magnitudes of anisotropy. There is a small difference in the aggregate elastic symmetry, with magmatic microstructures having higher orthorhombic and hexagonal components, whereas plastic deformation microstructures have a slightly higher monoclinic component, possibly correlated with predominant monoclinic simple shear flow in plastically deformed samples. Overall, plots for CPO strength (ODF J index), pole figure strength, CPO symmetry and seismic anisotropy show significant scattering. This could be related to sampling statistics, although our database is a factor of ten higher than the olivine database of 1998, or it could be related to the low symmetry (triclinic) structure of plagioclase resulting in the addition of degrees of freedom in the processes creating the CPOs.
ISSN: 1869-9510

hal-00963439
https://hal.archives-ouvertes.fr/hal-00963439
DOI : 10.5194/se-4-511-2013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The easternmost part of the Neoproterozoic Araçuaí belt comprises an anatectic domain that involves anatexites (the Carlos Chagas unit), leucogranites and migmatitic granulites that display a well-developed fabric. Microstructural observations support that the deformation occurred in the magmatic to submagmatic state. Structural mapping integrating field and anisotropy of magnetic susceptibility (AMS) revealed a complex, 3D structure. The northern domain displays gently dipping foliations bearing a NW-trending lineation, southward, the lineation trend progressively rotates to EW then SW and the foliation is gently folded. The eastern domain displays E-W and NE-SW trending foliations with moderate to steeply dips bearing a dominantly NS trending lineation. Magnetic mineralogy investigation suggests biotite as the main carrier of the magnetic susceptibility in the anatexites and ferromagnetic minerals in the granulites. Crystallographic preferred orientation (CPO) measurements using the electron backscatter diffraction (EBSD) technique suggest that the magnetic fabric comes from the crystalline anisotropy of biotite and feldspar grains, especially. The delineation of several structural domains with contrasted flow fabric suggests a 3D flow field involving westward thrusting orthogonal to the belt, northwestward orogen-oblique escape tectonics and NS orogen-parallel flow. This complex deformation pattern may be due to interplay of collision-driven and gravity-driven deformations.
ISSN: 0191-8141

hal-00903878
https://hal.archives-ouvertes.fr/hal-00903878
DOI : 10.1016/j.jsg.2013.08.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Microstructures, U-Pb SHRIMP zircon ages and temperature estimates were used to constrain the fabric evolution and timing of mylonitisation in the Patos shear zone (NE Brazil). Melt-bearing HT-mylonitic orthogneiss displays solid-state fabrics with coarse quartz ribbons and sutured grain boundaries. K-feldspar is often fractured and shows peripheral myrmekite. The textures typically become magmatic at the contacts with the Espinho Branco anatexite. Zircon crystals from two samples of the leucosome show Paleoproterozoic (ca. 2.2 Ga) inherited cores that are enveloped by recrystallised Neoproterozoic rims. These zircon grains define a discordia with lower intercept ages of 558 and 562 Ma but with large analytical errors. A leucogranite with transitional contacts with host diatexites provides a well-constrained zircon mean age of 566 ± 6 Ma (n = 15, 95% conf.), which is considered the best estimate for the peak metamorphic conditions. The transition from HT-mylonites to fine-grained mylonites and ultramylonites is marked by a progressive grain size reduction assisted by recrystallisation. Quartz crystallographic fabrics display [0 0 0 1] concentrations between Z and Y. K-feldspar and plagioclase fabrics record the activity of the (0 1 0)[0 0 1] and (0 1 0)[1 0 0] slip systems and, in the lower-temperature tectonites, the (1 0 0)[0 1 0] slip system. These results suggest a diachronic evolution in which an initial HT northern domain was deformed by intracrystalline slip and melt-assisted granular flow, followed by medium- to low-temperature solid-state creep in the southern shear zone domain. The mylonites therefore record the rheological heterogeneities responsible for the formation of a late continental shear zone that nucleated under partially molten conditions and was later reactivated through melt-absent strain localization following exhumation.
ISSN: 0301-9268

hal-01053497
https://hal.archives-ouvertes.fr/hal-01053497
DOI : 10.1016/j.precamres.2013.12.020

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report on microstructural data obtained by optical microscopy and transmission electron microscopy concerning the crystallographic relationships of serpentine minerals with their host olivine in two contrasting situations. In the first case, mesh-textured lizardite (liz) is developed in a standard 60% serpentinized oceanic harzburgite from the Oman ophiolite where olivine converts to columnar lizardite. The joined columns are perpendicular to the basal plane (001)(liz), corresponding to the pseudofibres observed optically. The plane (001)(liz) is locally parallel to the narrow boundary ol-liz; thus column orientations register the interface of serpentinization. The ol-liz relationships are not strictly topotactic, but reflect preferred cracking orientations in olivine, parallel to (010)(ol). In the second case, antigorite (atg) develops in a rare sample of antigorite schist in a kimberlite from Moses Rock (Colorado Plateau), representative of a suprasubduction-zone mantle wedge. High-resolution transmission electron microscopy (HRTEM) images along [010](atg) show domains of very regular modulation with a 43 center dot 5 A wavelength (m = 17, where m is the number of silicate tetrahedra along the wave), with few defects, indicative of HP-HT antigorite, and also heavily kinked regions as fingerprints of strong tectonic shear. TEM imaging and electron diffraction patterns reveal two topotactic relationships between antigorite and olivine: [100](atg)//[010](ol) and < 100 >(atg)//< 100 >(ol); the planes in contact are (001)(atg)//(100)(ol) and (001)(atg)//(010)(ol), respectively. The [010](atg)//[001](ol) and antigorite lamellae are parallel to the forsterite b-axis. In both cases, the topography of olivine-serpentine interfaces is controlled by open fluid pathways along microcracks oriented according to the anisotropy of the olivine aggregate. In the cases studied, the serpentine aggregate exhibits a preferred orientation inherited from that of the peridotite. These results have some relevance to the seismic anisotropy of serpentinized mantle. Anisotropy of propagation of seismic waves as a result of the olivine fabric is maintained and reinforced with the development of lizardite. Conversely, the development of antigorite produces a trench-parallel fast S-wave polarization and an anisotropy that is lowered at low degrees of serpentinization and then increased with increasing serpentinization.
ISSN: 0022-3530

hal-00456061
https://hal.archives-ouvertes.fr/hal-00456061
DOI : 10.1093/petrology/egp049