Éditeur(s) : HAL CCSD
Résumé : International audience
The french Law No. 2013-60 of 22 July 2013 on higher education and research governance encourages the French universities to invest more in the field of digital strategy. The presentation provides an update on the concept of digital blueprints universities and proposes to reflect on theestablishment of an agile design digital transformation as a solution to governance and democratization apparent paradox. Secondly, it will implement an analytical instrument to deduce conclusions.
La loi n°2013-60 du 22 Juillet 2013 relative à l’enseignement supérieur et à la recherche encourage les gouvernances des universités françaises à davantage investir le terrain de la stratégie numérique. La présentation se propose de faire le point sur le concept de schémas directeurs dunumérique des universités et propose de réfléchir sur la mise en place d’une conception agile de la transformation numérique comme solution au paradoxe apparent gouvernance et démocratisation. Dans un deuxième temps, il s’agira de mettre en oeuvre un instrument d’analyse pour en déduire les conclusions.
Les écosystèmes numériques et la démocratisation informationnelle : Intelligence collective, Développement durable, Interculturalité, Transfert de connaissances
Schoelcher, France

hal-01264946
https://hal.univ-antilles.fr/hal-01264946
https://hal.univ-antilles.fr/hal-01264946/document
https://hal.univ-antilles.fr/hal-01264946/file/Bertrand%20MOCQUET%20%26%20al.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we determine dislocation core structures and Peierls stresses of wadsleyite, a high-pressure mineral present in the Earth mantle. We use a Peierls-Nabarro model combined with a finite-element method in which we introduce two-dimensional generalized stacking fault energies. Several potential slip planes of wadsleyite are considered. The results show that dislocations in this mineral can exhibit complex dislocation cores with linear or non-collinear dissociation and even three-dimensional dislocation cores. The calculation of the Peierls stresses gives information on the potential activity of slip systems governing the plasticity of wadsleyite. Our study confirms experimental observations that 1/2 < 1 1 1 >{1 0 1} is the easiest slip system in this structure at high-pressure and that [1 0 0](0 1 0) is the second easiest. Both these easily slip systems have dislocations that dissociate into collinear partial dislocations. In contrast [0 1 0] dislocations with very large Burgers vector (11.2 angstrom) are stabilized by complex dissociations involving four partial dislocations.
ISSN: 1359-6454

hal-00475548
https://hal.archives-ouvertes.fr/hal-00475548
DOI : 10.1016/j.actamat.2009.10.047

Éditeur(s) : HAL CCSD
Résumé : International audience
Cumulative human impacts have led to the degradation of marine ecosystems and thedecline of biodiversity in the European and contiguous seas. Effective conservationmeasures are urgently needed to reverse these trends. Conservation must entail societalchoices, underpinned by human values and worldviews that differ between the countriesbordering these seas. Social, economic and political heterogeneity adds to the challenge ofbalancing conservation with sustainable use of the seas. Comprehensive macro-regionalcoordination is needed to ensure effective conservation of marine ecosystems andbiodiversity of this region. Under the European Union Horizon 2020 framework programme,the MarCons COST action aims to promote collaborative research to support marinemanagement, conservation planning and policy development. This will be achieved bydeveloping novel methods and tools to close knowledge gaps and advance marineconservation science. This action will provide support for the development of macro-regional and national policies through six key actions: to develop tools to analysecumulative human impacts; to identify critical scientific and technical gaps in conservationefforts; to improve the resilience of the marine environment to global change and biologicalinvasions; to develop frameworks for integrated conservation planning across terrestrial,freshwater, and marine environments; to coordinate marine conservation policy acrossnational boundaries; and to identify effective governance approaches for marine protectedarea management. Achieving the objectives of these actions will facilitate the integration ofmarine conservation policy into macro-regional maritime spatial planning agendas for theEuropean and contiguous seas, thereby offsetting the loss of biodiversity and ecosystemservices in this region.
Research Ideas and Outcomes

hal-01474085
https://hal-univ-perp.archives-ouvertes.fr/hal-01474085
https://hal-univ-perp.archives-ouvertes.fr/hal-01474085/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01474085/file/RIO_article_11884.pdf
DOI : 10.3897/rio.3.e11884

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Strain and strain rate partitioning in partially molten rocks are two of the important mechanisms that govern the process of coupling and/or decoupling of the partially molten lithosphere. Consequently, the proportion of partial melt and crystals and their network in partially molten rocks influence the degree of the partitioning along with the bulk rheology of the system. This study explores the possible role of finite strain and strain rate on the rate and volume of partial melting and crystallization in a metapelitic system undergoing deformation. Cylinders of synthetic quartz-muscovite aggregate (7: 3 volume ratio) were deformed in torsion at 750 C, 300 MPa and constant shear strain rate ((gamma) over dot = 3 x 10(-4) s(-1)) for finite shear strains (gamma) 1-15. The deformed samples were studied along the longitudinal tangential ( LT) and axial ( LA) sections to obtain the data along a range of strain rates for a given finite strain and vice versa. The results showed that deformation plays an important role on the kinetics of partial melting and crystallization. With increasing strain rate, amount and rate of crystallization comprise the volumetrically dominant process compared to partial melting at a given finite strain. In contrast, when the strain rate is constant, partial melting is the dominant process over crystallization up to moderate strain (gamma < 5). The dominant process reverses at higher strain, and the system shows more crystallization than partial melting. Application of the experimental data to geological systems implies that for metapelites a significant amount (similar to 20%) of partial melt can generate at high strain rate and moderate strain (gamma similar to 7), but at high strain (gamma = 15) the system is melt depleted. Under such conditions, decoupling should take place in brittle-ductile mode. On the other hand, rocks undergoing deformation with low strain rates and strain (gamma < 3) contain more than 25% partial melt, which can act as a major decoupling agent by localizing ductile shear zones.
ISSN: 0148-0227

hal-00617714
https://hal.archives-ouvertes.fr/hal-00617714
DOI : 10.1029/2010JB007865

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : TECTO LITHO
On the basis of a section across the northwestern Alpine wedge and foreland basin, analogue modeling is used to investigate the impact of surface processes on the orogenic evolution. The basis model takes into account both structural and lithological heritages of the wedge. During shortening, erosion and sedimentation are performed to maintain a critical wedge. Frontal accretion leads to the development of a foreland thrust belt; underplating leads to the formation of an antiformal nappe stack in the internal zones. Important volumes of analogue materials are eroded out of the geological record, which in the case of the Alps suggests that the original lengths and volumes may be underestimated. The foreland basin evolves differently depending on the amounts of erosion/sedimentation. Its evolution and internal structuring is governed by the wedge mechanics, thought to be the main controlling mechanism in the development of the Molasse basin in a feedback interaction with surface processes.
ISSN: 0278-7407

hal-00404424
https://hal.archives-ouvertes.fr/hal-00404424
DOI : 10.1029/2006TC002048

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A large sand injectite network is very well exposed in the area of Bevons, Southeast France. The associated sandstone turbiditic channel–fill and the host marls are the Aptian–Albian rocks of the Vocontian Basin. The sand injection network is composed of dykes, sills and sedimentary laccoliths ranging in thickness from mm to pluri–m. The dykes and sills have vertical and horizontal lengths of up to and over 100 m and 1 km, respectively. Outcrop observations show that the architecture and morphology of the sand injectites in the marls is governed by the local stress field during injection, pre–existing faults, the host–rock lithology, compaction, and distance to the potential sand source(s). The main set of dykes is oriented N50–60° perpendicular to the minimum compressive stress σ3 during sand injection. Two other sets of dykes are intruded along pre–existing syn–sedimentary faults oriented N140–150° (set 2) and N90° (set 3) during the Apto–Cenomanian interval. Sills and dykes thin laterally away from their potential sand sources and thin laterally away from them. The vertical thickness variations of the dykes and wings are more complex, as thinning away from the sand sources is often compensated by thickening toward the palaeo–surface. Based on field observations and measurements, we characterized the 3D architecture of the sand injectites and showed that the injectites probably formed due to a forceful injection from an overpressured sand body sealed by low–permeability lithologies.
ISSN: 0191-8141

hal-01243488
https://hal.archives-ouvertes.fr/hal-01243488
DOI : 10.1016/j.jsg.2015.07.001

Éditeur(s) : HAL CCSD
Résumé : International audience
The french Law No. 2013-60 of 22 July 2013 on higher education and research governance encourages the French universities to invest more in the field of digital strategy. The presentation provides an update on the concept of digital blueprints universities and proposes to reflect on the establishment of an agile design digital transformation as a solution to governance and democratization apparent paradox. Secondly, it will implement an analytical instrument to deduce conclusions.
La loi n°2013-60 du 22 Juillet 2013 relative à l’enseignement supérieur et à la recherche encourage les gouvernances des universités françaises à davantage investir le terrain de la stratégie numérique. La présentation se propose de faire le point sur le concept de schémas directeurs dunumérique des universités et propose de réfléchir sur la mise en place d’une conception agile de la transformation numérique comme solution au paradoxe apparent gouvernance et démocratisation. Dans un deuxième temps, il s’agira de mettre en oeuvre un instrument d’analyse pour en déduire les conclusions.
Les écosystèmes numériques et la démocratisation informationnelle : Intelligence collective, Développement durable, Interculturalité, Transfert de connaissances
Schoelcher, France

hal-01264948
https://hal.univ-antilles.fr/hal-01264948
https://hal.univ-antilles.fr/hal-01264948/document
https://hal.univ-antilles.fr/hal-01264948/file/Bertrand%20MOCQUET.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This study investigates three-dimensional flow modes of orogenic plateaus by means of physical modeling. Experiments consist of shortening two contiguous lithospheres of contrasting strength, one being a weak plateau-type lithosphere and the other a strong craton-type lithosphere. The lateral boundaries are either totally confined or allow escape toward a lateral foreland on one side. Two synconvergence flow regimes are distinguished, which are governed by the balance between the gravity potential and the strength of the plateau crust and the resistance of its lateral foreland. The first regime implies transversal (orogen-normal) injection of plateau lower crust into the collision zone as a result of confinement of the plateau by an increasingly stiffer lateral boundary. As a precursor mechanism to channel flow, transversal injection responds to downward thickening of the plateau crust that is forcedly extruded into the orogenic wedge. The second regime is that of collapse-driven lateral escape of the plateau. This regime is established after a threshold is attained in the interplate coupling in the collision zone, which allows the gravity potential of the plateau to overcome the resistance of its lateral boundary. Under the collapse-driven escape regime (orogen parallel), such as that governing Tibet during the last 13 Ma, most of the convergence in the plateau and the top and rear of the collisional wedge is transformed into lateral flow and extension.
ISSN: 0148-0227

hal-01229107
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107/file/2015JB012110_revised.pdf
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107/file/SupplementaryMaterial_final.pdf

Éditeur(s) : HAL CCSD
Résumé : Sand intrusions (or injectites) are most often the product of post-depositional remobilization of sand leading to its injection into the surrounding rocks. While injectites were recognized for the first time nearly 200 years ago, their emplacement process has been studied for a couple of decades only, since the concepts of deep sea depositional environments have allowed us to better understand their emplacement processes. However, these processes are still relatively poorly understood. Our approach is based on the study of injectites in the Lower Congo Basin from seismic and well data, which we compare to a fossil system in the SE France basin. We have shown that: (1) In buried turbidite channel systems draping deposits on the channel flanks and terraces of channels have the same geophysical signature as 'wing-like' injectites. Finally, the only criterion for identifying seismic injectites is the presence of bedding-discordant seismic reflections, and in the best case the associated uplift of the overlying seismic reflectors. (2) Seismic-scale conical and saucer-shaped sand injectites have been identified in the Lower Congo Basin. The remobilization is likely due to overpressuring induced by the buoyancy effect of hydrocarbons trapped in the margins of a lobe buried underneath 160 m of sediment, followed by the sudden injection of fluidized sand associated with fault reactivation of faults (with a possible role of nearby salt diapirs). (3) A network of injectites (dykes, sills/wings and laccoliths) was formed in the Vocontian basin during the late Albian and/or early Cenomanian, from a lower-middle Albian turbidite channel. The emplacement is probably due to the early compartmentalization of the channel during its burial and the increase of the sedimentation rate generating overpressure; and the subsequent large influx of deep fluids triggering injection. The injection of sand was polyphased: a first episode formed the sills and another emplaced the dykes. Sills/wings and dykes propagated about 2 km laterally away from the parent sand body and about 200 m up to the surface, revealing a much more extended lateral than vertical reach, contrary to the classically accepted idea from the interpretation of seismic data. (4) The emplacement of this large network of injectites was governed by hydrofracturing. Therefore, its morphology is dependent on the host rock heterogeneity (isotropy, fractures), the paleo-stress orientation (ó3 = NW-SE) and the burial depth of the source (300-600 m) at the time of injection. The study of this fossil network allows us to define the relationship between morphology of the injected network and stress state at the time of injection. This relationship can be extrapolated to constrain the morphology of subsurface networks beyond seismicvisibility. (5) Sands injected into low permeability lithologies bear evidence to a major event of fluid escape in the studied basin, but also channeled fluids long after their formation. In this way, injectites both attest to specific episodes of fluid migration in sedimentary basins and contribute to long-lived re-routing of migrating fluids once emplaced. The injection of sand is associated with the sudden escape of fluids, probably resulting from a significant tectonic and/or sedimentary event; in addition, the architecture of injectite networks is governed by the local paleo-stress and heterogeneity in the host rock. Consequently, characterizing injectite networks is an important step in understanding the plumbing systems of continental margins, i.e. the post-depositional evolution of sedimentary basins.
Les intrusions sableuses (ou injectites) sont le plus souvent le produit de la remobilisation post-dépositionnelle des sédiments et de l'injection du sable dans les roches environnantes. Bien que reconnues pour la première fois il y a près de 200 ans, elles ne sont réellement étudiées que depuis quelques dizaines d'années, depuis que les concepts sur les environnements de dépôt dans les domaines marins profonds nous permettent de mieux comprendre les processus de mise en place. Cependant, ces processus restent encore aujourd'hui relativement mal compris. Notre approche repose sur l'étude d'injectites dans le bassin du Bas-Congo a partir de données de sismique et de puits que nous comparerons a un système fossile dans le bassin du SE de la France. Nous avons montre que : (1) Dans des systèmes de chenaux turbiditiques enfouis, les dépôts de drapage sur les marges et terrasses de chenaux présentent la même signature géophysique que les injectites de type "wing". Finalement, le seul critère sismique d'identification des injectites est la présence de réflexions sismiques sécantes vis-a-vis de la stratigraphie associée dans le meilleur des cas au soulèvement des réflecteurs sismiques sus-jacents. (2) Des injectites d'échelle sismique en forme de cône et d'assiette ont été identifiées dans le bassin du Bas-Congo. La remobilisation résulte probablement des pressions anormales induites par l'effet de flottabilité des hydrocarbures piégés dans les marges d'un lobe enfoui sous 160 m de sédiment, puis de l'injection soudaine du sable fluidise associée a la réactivation de failles (possible rôle des diapirs de sel a proximité). (3) Un réseau d'injectites (dykes, sills/wings et laccolites) s'est formé dans le bassin Vocontien entre la fin de l'Albien supérieur et/ou le début du Cénomanien, depuis un chenal turbiditique de l'Albien inférieur-moyen. La mise en place résulte probablement de la compartimentalisation précoce du chenal au cours de son enfouissement et de l'augmentation du taux de sédimentation générant la surpression et de l'apport ulterieur d'importante quantité de fluides profonds déclenchant l'injection. L'injection du sable a été polyphasée : une première injection a formé des sills et une suivante des dykes. Les sills/wings et les dykes se sont propagés latéralement au chenal source sur environ 2 km et vers la surface sur environ 200 m, mettant en évidence une forte remobilisation latérale plutôt que verticale, contrairement a l'idée classiquement admise a partir de l'interprétation des données sismiques. (4) La formation de ce large réseau d'injectites a été gouvernée par des mécanismes d'hydrofracturation. Par conséquent, sa morphologie a été dépendante des hétérogenéités de la roche hôte (milieu isotrope, fracture), des directions de paléo-contraintes (ƒÐ3 = NWSE) et de la profondeur d'enfouissement de la source (300-600 m) au moment de l'injection. L'étude de ce réseau fossile permet de définir les relations entre morphologie du réseau injecté et état de contraintes au moment de l'injection. Cette relation peut être extrapolée de façon à contraindre la morphologie des réseaux de subsurface au-delà de la visibilité sismique. (5) Les sables injectés dans des lithologies de faible perméabilité témoignent d'un épisode d'échappement de fluide important dans les bassins étudiés mais ont aussi guide les fluides longtemps après leur formation. Les injectites contribuent ainsi a l'initiation épisodique et la pérennisation de migrations de fluides dans les bassins sedimentaires. Le processus d'injection est associé a l'échappement brutal de fluides, résultant vraisemblablement d'un évènement tectonique et/ou sédimentaire important, et l'architecture des réseaux d'injectites est gouverné par les paléo-contraintes locales et les hétérogénéités de la roche hôte. Par conséquent, la caractérisation des réseaux d'injectites est une étape importante dans la compréhension de la plomberie des marges, c'est-a-dire l'évolution post-dépôt des bassins sédimentaires.
https://tel.archives-ouvertes.fr/tel-01011486

tel-01011486
https://tel.archives-ouvertes.fr/tel-01011486
https://tel.archives-ouvertes.fr/tel-01011486/document
https://tel.archives-ouvertes.fr/tel-01011486/file/These_Monnier_2013_banalisee.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The main political concern in the southern areas of Madagascar is poverty alleviation. To alleviate poverty in the area, the government has chosen to enforce adjustment policies of the World Bank Group. According to the World Bank Group's argument, while artisanal mining is supposed to create significant economic, social and environmental problems, large-scale mining investment results in economic and social prosperity. This paper focuses principally on a re-analysis of the debates regarding the relationship between artisanal and large-scale mining and poverty alleviation in developing countries. Further, the paper offers an alternative viewpoint on these issues based on the example of Madagascar. In the last decade, Madagascar has experienced a significant increase in mining activity. Towards the end of the 90s, informal and artisanal mining emerged as one of the most important economic activities of the area with the development of the Ilakaka frontier. At the same time, foreign investments began to benefit from adjustment policies implemented by the government, and large-scale mining operations also commenced. As the local socio-economic system was deeply affected by these developments, it is wise to monitor the effects of each type of mining operation on poverty alleviation. On the one hand, it appears that governance insufficiency has hampered possibilities for broader economic prosperity through large-scale mining investments. On the other hand, while artisanal mining is frequently condemned by scholars, the negative comments seem to be overly pessimistic, as this activity can be demonstrated to provide considerable economic opportunities for both the native and migrant populations.
ISSN: 0264-8377

hal-01303896
https://hal-univ-perp.archives-ouvertes.fr/hal-01303896
DOI : 10.1016/j.landusepol.2013.08.001

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
In situ mineralization of CO2 in ultramafic rock-hosted aquifers is one of the promising solutions for decreasing CO2 concentrations in the atmosphere. Naturally altered ultramafic rocks suggest that carbonation processes are controlled by local heterogeneities in the structure of the rock and fluid transport at the water-rock interfaces. We studied the role of rock crystallographic anisotropy relative to the global fluid flow direction on the mineralization of CO2 by means of electron microscope analyses from the macro- to the micrometer scale (EBSD-FIB). The sample used for the measurements was a hot pressed olivine core percolated by water enriched in CO2 (pCO2 = 10 MPa) at 180 °C. During the percolation experiment, olivine was dissolved and two types of carbonates, dolomite, and magnesite, were precipitated on olivine surfaces. The results showed that the dissolution of olivine is controlled by its crystallographic properties as shown by the development of etch-pits only on the (010)ol planes and with elongated shapes parallel to the [010]ol axes. In contrast, the precipitation of carbonates is governed by hydrodynamic properties. Carbonates are heterogeneously distributed in the percolated rock. They are mainly located along the moderate (for dolomite) and the minor (for magnesite) flow paths, both oriented parallel to the principal fluid flow direction, which allow carbonates to be supplied with divalent cations (e.g., Ca2+, Mg2+, and Fe2+). In these flow paths, carbonate growth is systematically oriented normal to the flow that facilitates the development of chemical gradients with cationic supersaturation conditions for carbonate precipitation near the walls.In natural systems, the (010)ol planes are parallel to the Moho and the (100)ol planes are vertical; our study suggests that flow of CO2-rich fluids will induce precipitation of carbonates localized along, and preferentially clogging, vertical flow paths while favoring olivine dissolution along horizontal fluid pathways. This dual control of structure and fluid flow on carbonation mechanisms could be an important parameter allowing sustainable CO2 storage in peridotites, while limiting the risks of leakage toward the surface.
ISSN: 0003-004X

hal-01143393
https://hal.archives-ouvertes.fr/hal-01143393
DOI : 10.2138/am-2015-4913

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Most peridotite massifs and mantle xenoliths show a wide range of isotopic variations, often involving significant decoupling between Hf, Nd and Sr isotopes. These variations are generally ascribed either to mingling of individual components of contrasted isotopic compositions or to time integration of parent-element enrichment by percolating melts/fluids, superimposed onto previous depletion event(s). However, strong isotopic decoupling may also arise during porous flow as a result of daughter-elements fractionation during solid-liquid interaction. Although porous flow is recognized as an important process in mantle rocks, its effects on mantle isotopic variability have been barely investigated so far. The peridotites of the Lherz massif (French Pyrenees) display a frozen melt percolation front separating highly refractory harzburgites from refertilized lherzolites. Isotopic signatures observed at the melt percolation front show a strong decoupling of Hf from Nd and Sr isotopes that cannot be accounted for by simple mixing involving the harzburgite protolith and the percolating melt. Using one dimensional percolation-diffusion and percolation-reaction modeling, we show that these signatures represent transient isotopic compositions generated by porous flow. These signatures are governed by a few critical parameters such as daughter element concentrations in melt and peridotite, element diffusivity, and efficiency of isotopic homogenization rather than by the chromatographic effect of melt transport and the refertilization reaction. Subtle variations in these parameters may generate significant inter-isotopic decoupling and wide isotopic variations in mantle rocks. (C) 2009 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00413135
https://hal.archives-ouvertes.fr/hal-00413135
DOI : 10.1016/j.epsl.2008.12.033

Éditeur(s) : HAL CCSD
Résumé : International audience
This work aims to better understand the physical processes governing the wave propagation in a vertically shearedcurrent and the resulting nearshore circulation patterns. It is based on a high resolution hydro-morphodynamic fieldcampaign, ROUSTY2014, collecting a comprehensive hydro-morphodynamical dataset during a full winter season.The overall analysis highlights three main circulation patterns, largely controled by the bathymetric features and byco-working or competing wind and waves forcings. Regarding the vertical structuration of the circulation, most of fieldobservations shown seaward directed circulation with onshore component close to the air/sea surface whose intensityvaries according to incoming wave conditions. Forth, vertical shear increase when breaking happen close to sensorlocation and orientation of mean circulation depend on wind direction.
35th International Conference on Coastal Engineering
Antalya, Turkey

hal-01426582
https://hal.archives-ouvertes.fr/hal-01426582

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent sedimentary facies and processes along the offshore slope of east Taiwan are investigated using a large set of geophysical and sedimentological data. The Taiwan orogen is often considered as one of the most tectonically active regions in the world and also suffers important climatic activity with an average of four typhoons per year. We have mapped in details the morphosedimentary features and characterized the sedimentary facies along offshore eastern Taiwan. There, we show that the slope is driven by a variety of erosional processes from mass wasting to turbidity current. Mass movements such as slides or mass transport deposits (MTDs) are ubiquitous and affect the whole east coast off Taiwan. Detailed core investigations, such as grain size analysis, chemical and mineralogical composition, revealed that turbidite facies range from thin fine-grained turbidites to thick massive turbidite facies. The detailed analysis of turbidite beds allow us to discuss the controlling factors of turbidity current generation. Turbidity currents represent an important sedimentary process that governs the slope morphology off east Taiwan. Triggering mechanisms likely range from slope instabilities related to earthquakes shaking to failure relative to climatic-controlled pulses of sediment supply. We propose that at least two end-members are characteristics in our turbidite records in term of controlling factor:1) Turbidity currents likely generated by tectonic activity and earthquakes shaking in particular; and2) Turbidity currents likely generated by climatic activity such as typhoon-induced floods.
ISSN: 0025-3227

hal-01277768
https://hal.archives-ouvertes.fr/hal-01277768
DOI : 10.1016/j.margeo.2015.05.013

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Limestone dissolution by CO2 -rich brine induces critical changes of the pore network geometrical parameters such as the pore size distribution, the connectivity, and the tortuosity which govern the macroscopic transport properties (permeability and dispersivity) that are required to parameterize the models, simulating the injection and the fate of CO2 . A set of four reactive core-flood experiments reproducing underground conditions ( T=100∘C and P=12 MPa) has been conducted for different CO2 partial pressures (0.034
ISSN: 0169-3913

hal-00963597
https://hal.archives-ouvertes.fr/hal-00963597
DOI : 10.1007/s11242-013-0257-4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tropical islands are characterized by thermal and orographical forcings which may generate microscale air mass circulations. The Lesser Antilles Arc includes small tropical islands (width lower than 50 km) where a total of one-and-a-half million people live. Air quality over this region is affected by anthropogenic and volcanic emissions, or saharan dust. To reduce risks for the population health, the atmospheric dispersion of emitted pollutants must be predicted. In this study, the dispersion of anthropogenic nitrogen oxides (NOx) is numerically modelled over the densely populated area of the Guadeloupe archipelago under weak trade winds, during a typical case of severe pollution. The main goal is to analyze how microscale resolutions affect air pollution in a small tropical island. Three resolutions of domain grid are selected: 1 km, 333 m and 111 m. The Weather Research and Forecasting model (WRF) is used to produce real nested microscale meteorological fields. Then the weather outputs initialize the Lagrangian Particle Dispersion Model (FLEXPART). The forward simulations of a power plant plume showed good ability to reproduce nocturnal peaks recorded by an urban air quality station. The increase in resolution resulted in an improvement of model sensitivity. The nesting to subkilometer grids helped to reduce an overestimation bias mainly because the LES domains better simulate the turbulent motions governing nocturnal flows. For peaks observed at two air quality stations, the backward sensitivity outputs identified realistic sources of NOx in the area. The increase in resolution produced a sharper inverse plume with a more accurate source area. This study showed the first application of the FLEXPART-WRF model to microscale resolutions. Overall, the coupling model WRF-LES-FLEXPART is useful to simulate the pollutant dispersion during a real case of calm wind regime over a complex terrain area. The forward and backward simulation results showed clearly that the subkilometer resolution of 333 m is necessary to reproduce realistic air pollution patterns in this case of short-range transport over a complex terrain area. Globally, this work contributes to enrich the sparsely documented domain of real nested microscale air pollution modelling. This study dealing with the determination of the proper resolution grid and proper turbulence scheme, is of significant interest to the near-source and complex terrain air quality research community.
ISSN: 1352-2310

hal-01349208
https://hal.archives-ouvertes.fr/hal-01349208
DOI : 10.1016/j.atmosenv.2016.05.028

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : Les lagunes du Golfe du Lion constituent un patrimoine naturel reconnu ainsi qu'un enjeu essentiel pour les activités économiques locales. Leur évolution morphologique est donc une question importante dans le contexte actuel de changements climatiques et environnementaux. L'analyse de données topo-bathymétriques du système des étangs Palavasiens a permis de mieux cerner son évolution depuis le XVIIIème siècle. Les actions anthropiques et les apports du bassin versant apparaissent comme les facteurs principaux de l'évolution du système. Au cours des 40 dernières années, le système montre une tendance à se combler lentement avec une accumulation moyenne de 1,3 mm/an. Des différences de fonctionnement sur chacun des étangs sont mises en lumière en fonction des forçages naturels et anthropiques locaux. Lagoons of the Gulf of Lion, recognized for their natural heritage, are a key challenge for local economic activities. Their morphological evolution is an important issue in the current context of climate and environmental changes. Analysis of topo-bathymetric data of the Palavasian lakes system has helped to clarify its evolution since the XVIII th century. Human impacts and contributions from the watershed appear to be the main drivers governing the evolutionof the system. Over the past40 years, the system shows a tendency to slowly fill at an accumulation rate of 1.3 mm/year. Differences between lagoons are highlighted according to local natural and anthropogenic forcings.
ISSN: 1760-8716

hal-00854075
https://hal.archives-ouvertes.fr/hal-00854075
DOI : 10.5150/revue-paralia.2011.007