Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotite xenoliths exhumed by Quaternary alkaline magmatism in the Tahalgha district, southern Hoggar, represent fragments of the subcontinental lithospheric mantle beneath the boundary between the two major structural domains of the Tuareg Shield: the ‘Polycyclic Central Hoggar’ to the east and the ‘Western Hoggar’, or ‘Pharusian Belt’, to the west. Samples were collected from volcanic centres located on both sides of a major lithospheric shear zone at 4°35' separating these two domains. Although showing substantial variations in their deformation microstructures, equilibrium temperatures and modal and chemical compositions, the studied samples do not display any systematic changes of these features across the 4°35' fault. The observed variations rather record small-scale heterogeneities distributed throughout the study area and reflecting the widespread occurrence of vein conduits and metasomatized wall-rocks related to trans-lithospheric melt circulation during the Cenozoic. These features include partial annealing of pre-existing deformation microstructures, post-deformation metasomatic reactions, and trace-element enrichment, coupled with heating from 750–900°C (low-temperature lherzolites) to 900–1150°C (intermediate-T lherzolites and high-T harzburgites and wehrlites). Trace-element modelling confirms that the range of rare earth element (REE) variations observed in the Tahalgha clinopyroxenes may be accounted for by reactive porous flow involving a single stage of basaltic melt infiltration into a light REE (LREE)-depleted protolith. Whole-rock compositions record the final entrapment of disequilibrium metasomatic melts upon thermal relaxation of the veins–wall-rock system. The striking correlations between equilibrium temperatures and trace-element enrichment favor a scenario in which the high-temperature peridotites record advective heat transport along melt conduits, whereas the intermediate- and low-temperature lherzolites reflect conductive heating of the host Mechanical Boundary Layer. This indicates that the lithosphere did not reach thermal equilibrium, suggesting that the inferred heating event was transient and was rapidly erased by thermal relaxation down to the relatively low-temperature present-day geotherm. The low-T (<900°C) deformed lherzolites (porphyroclastic to equigranular) are characterized by only incipient annealing and LREE-depleted clinopyroxene compositions. They were only weakly affected by the Cenozoic events and could represent relatively well-preserved samples from rejuvenated Pan-African lithosphere. Extensive lithospheric rejuvenation occurred either regionally during the Pan-African orogeny, as a result of lithospheric delamination or thermomechanical erosion after thickening, or more locally along the meridional shear zones. The low-T Tahalgha lherzolites are comparable with lherzolites from Etang de Lherz, southern France, interpreted as lithospheric mantle rejuvenated by melt-induced refertilization during a late stage of the Variscan orogeny.
ISSN: 0022-3530

hal-01107410
https://hal.archives-ouvertes.fr/hal-01107410
DOI : 10.1093/petrology/egu056

Éditeur(s) : Elsevier
Résumé : Phosphorus forms with respect to sediment characteristics, such as grain-size, and major chemical elements, were studied in French coastal marine areas (the Bay of Seine and the Loire and Gironde Estuaries).In the three areas, Fe/Al-bound phosphate (Fe/Al-P) and exchangeable phosphate (exch-P) were significantly related to the proportion of fine fraction (< 63 mum). The special association of these forms with fine particles, as well as the relationships between exch-P, Fe/Al-P and Fe showed that adsorption processes on Fe oxides had taken place. However, for similar Fe concentrations, Bay of Seine sediments showed Fe/Al-P concentrations which were four to five times higher than those found in the Loire and Gironde Estuaries. This was attributed to differences in sediment nature and processes in these two types of areas. Indeed, the Loire and Gironde Estuaries frequently show hypoxia.Calcium-bound phosphate (Ca-P) was found in all grain size classes with comparable concentrations in the Bay of Seine where there was no correlation between Ca-P and Ca. This corresponded to the calcium's marine origin (shells) in the Bay of Seine. In contrast, the correlation of Ca-P with Ca and the fine fraction of the sediment in the Loire and Gironde Estuaries was characteristic of the predominant metamorphic origin of Ca-P in these areas.Useful information for interpretation of P-forms can be obtained from major sediment characteristics. Thus, for areas where specific relationships have previously been established good estimates of P-forms could be predicted from sediment properties.
Estuarine, Coastal and Shelf Science (0272-7714) (Elsevier), 2001-05 , Vol. 52 , N. 5 , P. 617-629

Droits : 2001 Academic Press. All rights reserved
http://archimer.ifremer.fr/doc/2001/publication-469.pdf
DOI:10.1006/ecss.2001.0766
http://archimer.ifremer.fr/doc/00000/469/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A suite of eclogite xenoliths from the Roberts Victor kimberlite (South Africa) is remarkable for its high abundances of base metal sulfides (BMS; up to 2 modal %). However, while sulfides are nearly ubiquitous in Type I eclogites (garnet > 0.07% Na2O), Type II eclogites (garnet < 0.07% Na2O) systematically lack sulfides. Two different sulfide assemblages are recognised within the Type I xenolith suite. Both populations are polyphase Cu-Ni-Fe sulfides, one characterised by the pyrrhotite (Po) + pentlandite (Pn) + chalcopyrite (Cp) assemblage and the other by the smythite/violarite (Smy/Vi) + (Ni)pyrite (Py) + Cp assemblage. The latter is the most abundant assemblage and reflects the supergene alteration of the "primary" Po + Pn + Cp assemblage. This process overprints the original composition of the sulfides by remobilising elements such as S, Fe, Ni, Se and Te. In the Type I eclogites, BMS occur as inclusions within silicates (garnet and clinopyroxene) and as interstitial grains. No chemical differences were observed between enclosed and interstitial sulfides. However, their relative abundances are correlated, indicating a similar origin. The Po + Pn + Cp assemblage is identical to eclogitic sulfides previously described in some Roberts Victor diamonds. Silicate-enclosed sulfides could appear to be early phases, but they are restricted to the outer parts of the silicate grains, suggesting a late incorporation during partial recrystallisation of silicate phases, induced by fluid-rock percolation-reaction during a metasomatic event. Positive whole-rock correlations between Se and (La/Sm)N⁎ and between Cu and ΣLREEN⁎ indicate a direct link between sulfide content and the enrichment of Mg + incompatible elements in the Type I eclogites, further supporting a metasomatic origin of the sulfide component. Similarly, a negative correlation between ΣLREEN⁎ and Cucpx implies that the metasomatic agent was at least partially composed of S-rich fluid (e.g. H2S, SO2) that reacted with the rock and leached Cu out of the silicates. The coupling between sulfides and LREE in the Type I eclogites, as well as the absence of sulfides and metasomatic features (e.g. unequilibrated grain boundaries, melt pockets, fluid inclusions, phlogopite) in the Type II eclogites, demonstrate that Type II eclogites did not undergo such a metasomatic event and therefore may represent the less-modified protoliths of Type I eclogites.
ISSN: 0009-2541

hal-00903856
https://hal.archives-ouvertes.fr/hal-00903856
DOI : 10.1016/j.chemgeo.2013.06.015

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We are concerned with the three-dimensional magnetostatic problem where the nonhomogeneities and the source are confined to a bounded domain. We derive a mixed formulation of this problem whose unknowns are the magnetic field, a current vector potential which is introduced as an auxiliary unknown, and a boundary unknown which results from the boundary integral method. This formulation is an improvement with respect to previous formulations proposed in the literature in the sense that it leads to an easier implementation using Nédélec's edge elements and boundary elements, and to good numerical accuracy. Some numerical results are described and compared with those obtained by using the classical formulation in a scalar potential.
ISSN: 0168-9274

hal-00730199
https://hal.archives-ouvertes.fr/hal-00730199

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
At Cima di Gagnone, garnet peridotite and chlorite harzburgite lenses within pelitic schists and gneisses correspond to eclogite-facies breakdown products of hydrated peridotites and are suitable for studying dehydration of serpentinized mantle. Thermobarometry and pseudosection modelling yield peak temperatures of 750-850°C and pressures <3 GPa. The minimum temperature recorded by the garnet peridotite corresponds to the maximum conditions experienced by the chlorite harzburgite, suggesting that these rocks recrystallized cofacially at ∼800°C. Alternatively, they might have decoupled during subduction, as achieved in tectonically active plate interface boundaries. The major and rare earth element (REE) variability of the peridotites was mostly acquired during pre-subduction mantle evolution as a result of partial melting and reactive melt flow. The ultramafic suite is also characterized by fluid-mobile element enrichments (B, Pb, As, Sb, Cs, Li, U, Be), which confirm derivation from variably serpentinized protoliths. Similarity in the U, Pb, B, Li and Sr contents of the Gagnone peridotites to present-day oceanic serpentinites suggests that these elements were partly taken up during initial serpentinization by seawater-derived fluids. Positive Be, As and Sb anomalies suggest involvement of fluids equilibrated with crustal (metasedimentary) reservoirs during subsequent subduction metamorphism and peridotite entrainment in (meta)sediments. Fluid-mobile element enrichment characterizes all peak eclogitic minerals, implying that multiple hydration events and element influx pre-dated the eclogite-facies dehydration. Peak anhydrous minerals retain B, Li, As and Sb concentrations exceeding primitive mantle values and may introduce geochemical anomalies into the Earth's mantle. The relatively low contents of large ion lithophile elements and light REE in the Gagnone peridotites with respect to much higher enrichments shown by metasomatized garnet peridotite pods hosted in migmatites (Ulten Zone, Eastern Alps) suggest that the crustal rocks at Gagnone did not experience partial melting. The Gagnone garnet peridotite, despite showing evidence for chlorite dehydration, retains significant amounts of fluid-mobile elements documenting that no partial melting occurred upon chlorite breakdown. We propose that the Gagnone ultramafic rocks represent a prime example of multi-stage peridotite hydration and subsequent dehydration in a plate interface setting.
ISSN: 0022-3530

hal-01054319
https://hal.archives-ouvertes.fr/hal-01054319
DOI : 10.1093/petrology/egt068

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : The Oman ophiolite consists of several massifs cropping out along a 500 km long band trending NW-SE along the coast of Oman; it is one of the best exposed sections of oceanic crust and mantle in the world. There is a gradient in igneous processes and composition in the ophiolite, with the northern massifs recording a polygenetic igneous history involving an increasingly important subduction component, whereas the southern massifs were formed primarily via a mid-ocean ridge basalt (MORB)-like, single-stage process at a submarine spreading ridge. In this study we use geochemical data from Wadi Tayin, which is one of the southern massifs of the Oman ophiolite, to constrain the composition and genesis of oceanic crust and upper mantle. The Wadi Tayin harzburgites are residues of partial melting that are as depleted as the most depleted mid-ocean ridge peridotites. They have low middle- to heavy rare earth element ratios, most probably reflecting melting close to and beyond the exhaustion of clinopyroxene. Like many abyssal peridotites, the Wadi Tayin samples show enrichment in highly incompatible elements, giving rise to U-shaped MORB-normalized trace element patterns. We favor the idea that this is caused by enrichment of highly incompatible elements along grain boundaries in peridotite, which may be the result of near-equilibrium partitioning between grain boundaries and grain interiors, rather than disequilibrium processes. Equilibrium partitioning between crystals and grain boundaries during melting and melt extraction is also our preferred explanation for ubiquitous high Pb contents relative to Ce and La in our samples as well as in most abyssal peridotites. The Wadi Tayin samples record substantial variability in terms of osmium isotopic composition and platinum group element (PGE) concentrations. The more radiogenic nature of the dunites and impregnated peridotites compared with the residual harzburgites may be due to relatively high Os-187/Os-188 in melt transported through the dunites. The presence of residual peridotites with whole-rock osmium isotopic compositions less radiogenic than MORB may be explained by melting of a veined (upwelling) mantle forming mixed melts in which much of the Os derives from veins with high Re/Os in a matrix of previously depleted peridotite. An important result of this study is that the shallowest samples are refertilized (i.e. anomalously enriched in incompatible elements), and record relatively high metamorphic closure temperatures. These observations suggest that migrating melt underwent crystallization during rapid cooling in the uppermost mantle during and immediately after ridge magmatism. A variety of geothermometers all yield the result that the stratigraphically highest harzburgites equilibrated at higher temperature than the deeper ones. The systematic decrease in closure temperature with increasing depth below the Moho transition zone probably reflects systematic variation in cooling rate as a function of depth in the mantle section. We hypothesize that the refertilization and higher closure temperatures recorded by the uppermost mantle samples are linked. More rapid cooling led to higher closure temperatures, and to partial crystallization of migrating melts in the shallowest part of the mantle section, yielding slightly elevated abundances of elements such as Ca and Na, and incompatible trace elements.
ISSN: 0022-3530

hal-00456056
https://hal.archives-ouvertes.fr/hal-00456056
DOI : 10.1093/petrology/egp077

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Certaines villes corses comme Bastia, Bonifacio, Calvi ou Corte possèdent des centres anciens enchâssés dans des ouvrages d’art militaire, aux fonctions défensives à l’origine : les citadelles. Cet article invite à interroger le patrimoine des citadelles urbaines insulaires, non pas en lui-même, mais en tant qu’objet de construction sociale et symbolique pris dans des processus de patrimonialisation qui engagent diverses logiques d’actions et modalités d’interventions, différents acteurs et usages. C’est donc cette pluralité instable des usages et des représentations du patrimonial qui a été privilégiée pour appréhender les enjeux sociaux, culturels, politiques et symboliques liés localement à ces processus. Cette communication s’appuie en particulier d’éléments extraits d’une enquête de terrain réalisée à Calvi, dans la microrégion de Balagne située dans l’ouest de la Corse.
Some Corsican cities like Bastia, Bonifacio, Calvi or Corte have old centers enshrined in military engineering works build originally for defensive functions: the citadels. This article invited to question the patrimony of insular urban citadels not for itself, but like the object of social and symbolic system, taken in patrimonialization process who engaged various logics of actions and conditions of operations, many actors and uses. So, it’s this unstable pluralism of patrimonial uses and representations that had been prioritized to grasp the social, cultural, politic and symbolic stakes bounded locally at these processes. This paper is based on field’s works realized in Calvi, in Balagna area, located in west Corsica.
Corse

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.6714
http://journals.openedition.org/etudescaribeennes/6714

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
We describe the simulation of an exterior problem using a magnetic field deriving from magnetostatics, with a numerical method mixing the approaches of C. I. Goldstein and L.-A. Ying. This method is based on the use of a graded mesh obtained by gluing homothetic layers in the exterior domain. On this mesh, we use an edge elements discretization and a recently proposed mixed formulation. In this paper, we provide both a theoretical and numerical study of the method. We establish an error estimate, describe the implementation, propose some preconditioning techniques and show the numerical results. We also compare these results with those obtained from an equivalent boundary elements approach. In this way, we retain that our method leads to a practical numerical implementation, a saving of storage, and turns out to be an alternative to the classical boundary elements method.
ISSN: 0749-159X

hal-00730196
https://hal.archives-ouvertes.fr/hal-00730196
DOI : 10.1002/num.10064

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Replenished axial melt lenses at fast-spreading mid-oceanic ridges may move upward and intrude into the overlying hydrothermally altered sheeted dikes, resulting in high-grade contact metamorphism with the potential to trigger anatexis in the roof rocks. Assumed products of this process are anatectic melts of felsic composition and granoblastic, two-pyroxene hornfels, representing the residue after partial melting. Integrated Ocean Drilling Program Expeditions 309, 312, and 335 at Site 1256 (eastern equatorial Pacific) sampled such a fossilized oceanic magma chamber. In this study, we simulated magma chamber roof rock anatectic processes by performing partial melting experiments using six different protoliths from the Site 1256 sheeted dike complex, spanning a lithological range from poorly to strongly altered basalts to partially or fully recrystallized granoblastic hornfels. Results show that extensively altered starting material lacking primary magmatic minerals cannot reproduce the chemistry of natural felsic rocks recovered in ridge environments, especially elements sensitive to hydrothermal alteration (e.g., K, Cl). Natural geochemical trends are reproduced through partial melting of moderately altered basalts from the lower sheeted dikes. Two-pyroxene hornfels, the assumed residue, were reproduced only at low melting degrees (<20 vol%). The overall amphibole absence in the experiments confirms the natural observation that amphibole is not produced during peak metamorphism. Comparing experimental products with the natural equivalents reveals that water activity (aH2O) was significantly reduced during anatectic processes, mainly based on lower melt aluminum oxide and lower plagioclase anorthite content at lower aH2O. High silica melt at the expected temperature (1000–1050 °C; peak thermal overprint of two-pyroxene hornfels) could only be reproduced in the experimental series performed at aH2O = 0.1.
ISSN: 0010-7999

hal-01174139
https://hal.archives-ouvertes.fr/hal-01174139
DOI : 10.1007/s00410-015-1136-5

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : Boundary Exchange (BE - exchange of elements between continental margins and the open ocean) has been emphasized as a key process in the oceanic cycle of neodymium (Nd) (Lacan and Jeandel, 2005a). Here, we use a regional eddy-permitting resolution Ocean General Circulation Model (1/4A degrees) of the North Atlantic basin to simulate the distribution of the Nd isotopic composition, considering BE as the only source. Results show good agreement with the data, confirming previous results obtained using the same parameterization of the source in a coarse resolution global model (Arsouze et al., 2007), and therefore the major control played by the BE processes in the Nd cycle on the regional scale. We quantified the exchange rate of the BE, and found that the time needed for the continental margins to significantly imprint the chemical composition of the surrounding seawater (further referred as characteristic exchange time) is of the order of 0.2 years. However, the timescale of the BE may be subject to large variations as a very short exchange time (a few days) is needed to reproduce the highly negative values of surface waters in the Labrador Sea, whereas a longer one (up to 0.5 years) is required to simulate the radiogenic influence of basaltic margins and distinguish the negative isotopic signatures of North Atlantic Deep Water from the more radiogenic southern origin water masses. This likely represents geographical variations in erosion fluxes and the subsequent particle load onto the continental margins. Although the parameterization of the BE is the same in both configurations of the model, the characteristic exchange time in the eddy-permitting configuration is significantly lower than the previous evaluations using a low resolution configuration (6 months to 10 years), but however in agreement with the available seawater Nd isotope data. This results highlights the importance of the model dynamics in simulating the BE process.
Ocean Science (1812-0784) (Copernicus Gesellschaft Mbh), 2010 , Vol. 6 , N. 3 , P. 789-797

Droits : Author(s) 2010. This work is distributed, EGU
http://archimer.ifremer.fr/doc/00013/12412/9201.pdf
DOI:10.5194/os-6-789-2010
http://archimer.ifremer.fr/doc/00013/12412/

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The platinum-group element (PGE) systematics of continental mantle peridotites show large variability, reflecting petrogenetic processing of the upper mantle during partial melting and melt/fluid percolation inside the lithosphere. By removing Pd-Cu-Ni rich sulfides, partial melting events that have stabilized the sub-continental mantle lithosphere fractionated PPGEs (Palladium-group PGE; Pt, Pd) relative to IPGEs (Iridium-group PGE; Os, Ir, Ru, Rh). Residual base-metal sulfides (BMS) survive as enclosed IPGE-enriched Monosulfide Solid Solutions (Mss), which otherwise decompose into Ru-Os-Ir-rich refractory platinum-group minerals (PGMs) once the partial melts become S-undersaturated. The small-scale heterogeneous distribution of these microphases may cause extreme nugget effects, as seen in the huge variations in absolute PGE concentrations documented in cratonic peridotites. Magmas fluxing through the lithospheric mantle may change the initial PGE budgets inherited from the melting events, resulting in the great diversity of PGE systematics seen in peridotites from the sub-continental lithosphere. For instance, melt-rock reactions at increasing melt/rock ratios operate as open-system melting processes removing residual BMS/PGMs. Highly percolated peridotites are characterized by extreme PGE depletion, coupled with PGE patterns and Os-isotope compositions that gradually evolve toward that of the percolating melt. Reactions at decreasing melt-rock ratios (usually referred to as "mantle metasomatism") precipitate PPGE-enriched BMS that yield suprachondritic Pd/Ir and occasionally affect Pt/Ir and Rh/Ir ratios as well. Moreover, volatile-rich, small volume melts fractionate Os relative to Ir and S relative to Se, thereby producing rocks with supra-chondritic Os/Ir and S/Se coupled with supra-chondritic Pd/Ir and Pt/Ir. Major magmatic inputs at the lithosphere-asthenosphere boundary may rejuvenate the PGE systematics of the depleted mantle. Integrated studies of "refertilized" peridotites with worldwide provenance provide evidence for mixing between old PGM-rich harzburgitic protoliths and newly-precipitated BMS. Long-lived PGMs carry the Os-isotope compositions of ancient melt‐depletion events into seemingly undepleted fertile lherzolites. Another diagnostic feature of major refertilization processes is the increasing modal abundance of Pt-Pd-Te-Bi or Pt-As-S microphases. Due to regional-scale refertilization processes, sizeable (> 100 km) domains of the upper lithospheric mantle are now significantly enriched in Pd, Au, Cu, Se, and other incompatible chalcophile elements that are of considerable importance in PGE-ore forming events.
ISSN: 0024-4937

hal-00828626
https://hal.archives-ouvertes.fr/hal-00828626
DOI : 10.1016/j.lithos.2012.08.017

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : A study combining very high resolution seismic and sediment core data has been carried out on the Thau lagoon (Mediterranean coast, microtidal setting, SE France) in order to understand more clearly the dynamics and Holocene chronology of its closure through the different stages of its filling. One main seismic unit (U2) has been defined into the infill, above the rocky basement (U0) and a composite unit U1, which is interpreted as remnants of Pleistocene fluvial terraces or/and to early marine Holocene deposits. Unit U2, that reaches locally 9 m in thickness, rests conformably on U1 in the central part of the lagoon and onlaps U0 or U1 close to the edge of the lagoon. It is divided in two sub-units, U2-1 and U2-2. U2-2 rests paraconformably on U2-1 in the central part of the lagoon where the infill is the thickest, while a marked erosional unconformity is observed between U2-1 and U2-2 on topographic highs of the basement and on the seaward edge of the lagoon. A total of seven elementary sequences have been observed in U2-1 and U2-2.;According to core data, U2 consists in a series of mud-dominated sequences, with shell fragments dispersed at the base. The vertical distribution of the fauna into U2-1 and U2-2 reveals a lagoonal environment. However in U2-1, marine species are more abundant in the south of the lagoon. C-14 AMS dating provides three ages: similar to 6000 cal yr B.P. in the lower part of U2-1 on CAL1, 5400 cal yr B.P. just above the boundary between U2-1 and U2-2 on CAL4, similar to 3000 cal yr B.P. in the middle of U2-2 on CAL4.;A scenario to explain the lagoon infill stratigraphy and geometry is proposed. The beginning of the lagoon infill occurred with the initiation of the barrier construction, as soon as the sea-level rise slowed down significantly, i.e. between 7000-6000 yr B.P. The sediment-fill began into the back-barrier system, with a high rate of sedimentation for U2-1, according to the radiocarbon data. At 5400 yr B.P., the barrier is assumed to be totally closed leading to the deposition of the fully lagoonal U2-2 succession. The unconformity between U2-1 and U2-2 is interpreted as the result of a rapid landward retreat of the barrier. This severe retreat could be related to climate forcing and/or brutal change in sediment discharge driven by the Rhone River, which is the main sediment source of the longshore drift. In this scenario, the last sub-unit, U2-2, represents most of the late Holocene infill. In this framework, the elementary sequences observed in U2-2 could be related to high frequency climate changes of about 1000-1500 years periodicity according to C-14 dates.
EISSN: 1777-5817

hal-00486386
https://hal.archives-ouvertes.fr/hal-00486386
DOI : 10.2113/gssgfbull.181.2.197

Éditeur(s) : Gauthier-Villars
Résumé : The Barbados Ridge composes the major part of the forearc region of the Lesser Antilles magmatic arc. The toe of the ridge is almost certainly the locus of modern accretion of sediment from the subducting Atlantic seafloor. The pre-Pleistocene geology of the island of Barbados, which exposes the crest of the Barbados Ridge, is best explained by accretion, implying that the ridge as a whole is an accretionary prism. Important elements of the island geology in this interpretation are the occurrence of much if not all of the pre-Pleistocene rocks in fault-bounded packets and the juxtaposition of age-overlapping abyssal pelagite and continent-derived fan deposits in such packets. The orientation of tectonic structures on Barbados, however, implies that the Paleogene subduction that created the older part of the prism occurred in a differently configured zone from the present one.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35674/34182.pdf
http://archimer.ifremer.fr/doc/00245/35674/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
We study if the multilevel algorithm introduced by Debussche, T. Dubois and R. Temam [Theoret. Comput. Fluid Dynam. 7 (1995), no. 4, 279-315; Zbl 838.76060] and Dubois, F. Jauberteau and Temam [J. Sci. Comput. 8 (1993), no. 2, 167-194; MR1242960 (94f:65098)] for the 2D Navier-Stokes equations with periodic boundary conditions and spectral discretization can be generalized to more general boundary conditions and to finite elements. We first show that a direct generalization, as in [C. Calgaro, J. Laminie and R. Temam, Appl. Numer. Math. 23 (1997), no. 4, 403-442; MR1453424 (98d:76124)], for the Burgers equation, would not be very efficient. We then propose a new approach where the domain of integration is decomposed into subdomains. This enables us to define localized small-scale components and we show that, in this context, there is a good separation of scales. We conclude that all the ingredients necessary for the implementation of the multilevel algorithm are present.
ISSN: 0271-2091

hal-00730709
https://hal.archives-ouvertes.fr/hal-00730709

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper aims to demonstrate that the use of a modern tool, the GPS (Global PositioningSystem), can significantly improve our understanding of active faults and their seismic cycle. We focus on theNorth-Caribbean plate boundary, specifically in the Dominican Republic, and present some quantificationsof velocities that result from measurements that have been made possible by the instrumentation of the areaby a consortium of researchers from France, the USA and the Dominican Republic, since 1994. Then, wediscuss the velocities in terms of seismic potential of the regional major faults.
Cet article présente comment l'utilisation d'un outil moderne, le GPS (Global Positioning System) peut apporter des éléments significatifs dans la connaissance des failles actives et de leur cycle sismique. Nous nous intéressons ici à la frontière de plaque Nord-Caraibe, en République Dominicaine, et présentons des quantifications de vitesses de déplacement obtenues grâce à l'instrumentation de la zone depuis 1994 par un groupe de chercheurs français, états-uniens et dominicains. Les résultats sont ensuite discutés en termes d'aléas sismologiques des failles majeures.
ISSN: 2551-6116

hal-01537725
https://hal.univ-antilles.fr/hal-01537725
https://hal.univ-antilles.fr/hal-01537725/document
https://hal.univ-antilles.fr/hal-01537725/file/Mazabraud-et-Forissier-2007.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The Early Palaeozoic Orogen of SE China consists of three litho-tectonic elements, from top to bottom: a sedimentary Upper Unit, a metamorphic Lower Unit and a gneissic basement. The boundaries between these units are flat lying, south directed, ductile decollements. The lower one is coeval with an amphibolite facies metamorphism (M1). The belt is reworked by migmatite-granite domes, high-temperature metamorphism (M2) and granitic plutons related to post-orogenic crustal melting. We date here the syn-M1 ductile shearing at 453 +/- 7 Ma by U-Th/Pb method on monazite. Previous ages and our new
ISSN: 0954-4879

hal-00420901
https://hal.archives-ouvertes.fr/hal-00420901
https://hal.archives-ouvertes.fr/hal-00420901/document
https://hal.archives-ouvertes.fr/hal-00420901/file/Faureetal-TerraNova-2009.pdf
DOI : 10.1111/j.1365-3121.2009.00888.x