Éditeur(s) : HAL CCSD Springer Verlag
Résumé : The activity of the Damavand volcano (Central Alborz, northern Iran) began 1.8 Ma ago and continued up to 7 ka BP. Although the volcanic suite is clearly of shoshonitic affinity, only two petrographic types can be distinguished in the studied lavas: (1) weakly differentiated absarokites (49 < %SiO2 < 51), scattered around the volcano but with a regional extension, (2) highly differentiated banakites (59 < %SiO2 < 63), which form the bulk of the 4,000 m thick volcanic pile. All lavas are alkalic (3.7 < %K2O < 5), REE and LILE-rich (e.g., 85 < La < 148 ppm; 9 < Th < 32 ppm) and show highly fractionated REE patterns (69 < La/Yb < 115) and pronounced Nb-Ta negative anomalies. The absarokites are characterised by Sr (0.7045-0.7046) and Nd (0.51266-0.51269) isotope compositions close to the Bulk Earth values, and distinct from those of the banakites (0.7047 < Sr-87/Sr-86 < 0.7049, 0.51258 < Nd-143/Nd-144 < 0.51262). The Pb isotope ratios are also slightly lower in the absarokites than in the banakites (18.71 < Pb-206/Pb-204 < 18.77, 15.62 < Pb-207/Pb-204 < 15.63, 38.85 < Pb-208/Pb-204 < 38.91, and 18.77 < Pb-206/Pb-204 < 18.84, 15.62 < Pb-207/Pb-204 < 15.64, 38.94 < Pb-208/Pb-204 < 39.06, respectively). Overall, there is a clear tendency towards higher Sr, Pb and lower Nd isotope ratios with increasing degree of differentiation. This study suggests that the absarokites result from a low degree of partial melting (similar to 5%) of a highly metasomatized mantle source, which inherited its characteristics from an old subduction setting. The initiation of volcanic activity 1.8 Ma ago results from variations in the lithospheric thermal regime, probably related to lithospheric delamination as proposed for Anatolia (Pearce et al. 1990). The banakites are mainly generated by extensive fractional crystallisation (similar to 70%) of the absarokitic magma, with a limited amount (a few percents) of assimilation of an old crustal component, in the form of bulk assimilation or AFC processes, which both can explain the Sr, Nd and Pb isotope data.
ISSN: 1437-3254

hal-00411553
https://hal.archives-ouvertes.fr/hal-00411553
DOI : 10.1007/s00531-006-0159-6

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The magmatology of Mount Pelée is characterized by the competition between two major petrogenetic processes : Iractional crystallization and magma mixing. The important volcanic hazards associated with this volcano make the interest of the study: the existence of accurate datas about its geology and the chronology of its eruptions is favorable to a magmatologic study. The aim of this work, carried out within the framework of the PIRPSEV, is to determine the relative importance of the petrogenetic processes involved during the volnano history and then to conclude about the functioning of the underlying magma chambers. It is found upon the petrographical, mineralogical and geochemical characteristics of the ejecta of Mount Pelée. NOT CONTROLLED OCR
La magmatologie de la Montagne Pelée est caractérisée par la compétition entre deux processus pétrogénétiques : la cristallisation fractionnée et le mélange magmatique. L'intérêt de l'étude de cet édifice réside dans l'importance considérable des risques volcaniques qui lui sont associés; l'existence de données très précises sur sa géologie et sur la chronologie de ses éruptions offre un cadre favorable à une étude magmatologique. Le présent travail, réalisé dans le cadre du PIRPSEV, vise à déterminer, à partir de l'ensemble des caractéristiques pétrographiques, minéralogiques et géochimiques des matériaux volcaniques de la Montagne Pelée, l'importance relative des processus pétrogénétiques impliqués au cours de l'histoire de ce volcan, et d'en tirer des conclusions sur le fonctionnement des réservoirs magmatiques sous-jacents. OCR NON CONTRÔLE

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1986/these-3752.PDF
http://archimer.ifremer.fr/doc/00000/3752/

Éditeur(s) : HAL CCSD Springer/Terra Scientific Publishing Company
Résumé : International audience
We report oil the discovery of magnetite nanoparticles ranging in size from 2 to 14 full in the mineralized zones of the Pena Colorada iron-ore deposit, southern Mexico. Micrometric scale magnetite was magnetically reduced and divided into distinct size ranges: 85-56 mu m, 56-30 mu m, 30-22 mu m, 22-15 mu m, 15-10 mu m, 10-7 mu m and 7-2 mu m. Nanometric-scale magnetite in the size range 2-14 nm was identified. The magnetite was characterized by X-ray diffraction, transmitted and reflected light microscope, high-resolution transmission electron microscopy (TEM), high angle annular dark field, Mossbauer spectroscopy and its magnetic properties. Crystallographic identification of nanostructures Was performed using high-resolution TEM. Characteristic changes were observed when the particles make the size transition from micro- to nanometric sizes, as follows: (1) frequency-dependent magnetic Susceptibility percentage (chi FD%) measurements Show high Values (13%) for the 2-14 nm fractions attributed to dominant fractions of superparamagnetic particles; (2) variations of chi FD% < 4.5% in fractions of 56-0.2 mu m occur in association with the presence of microparticles formed by magnetite aggregates of nanoparticles (< 15 nm) embedded in berthierine; (3) Mossbauer spectroscopy results identified a superparamagnetic fraction; (4) nanometric and 0.2-3 mu m grain size magnetite particles require a magnetic field up to 152 mT to reach saturation during the isothermal remanent magnetization experiment; (5) coercivity and remanent magnetization of the magnetite increase when the particle size decreases, probably due to parallel Coupling effects; (6) two-magnetic Susceptibility versus temperature experiments of the same 2-14 nm sample show that the reversibility during the second heating is due to the formation of new magnetite nanoparticles and growth of those already present. during the first heating process.
ISSN: 1343-8832

hal-00413053
https://hal.archives-ouvertes.fr/hal-00413053

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
B-type olivine fabrics are pervasive within highly depleted dunites of the small-sized Imono peridotite body located within the subduction-type Sanbagawa metamorphic belt of the southwest Japan arc. The dunites contain various microstructures, ranging from porphyroclastic to fine-grained intensely sheared textures. The Mg/(Mg+Fe) atomic ratios (Fo number) of olivine within these dunites are consistently around 0.9, as are the Cr/(Cr+Al) atomic ratios (Cr number) of chromian spinel, suggesting their evolution from a highly depleted magma (boninite). These data provide strong thermal constraints on the formation of the highly depleted dunites,as their formation requires hot, hydrous, shallow mantle (> 1250 degrees C at < 30 km depth) in the mantle wedge. Because the Sanbagawa metamorphic belt finally entrained these peridotites during progressive retrogression, B-type olivine fabrics probably developed in the fore-arc side of the subduction zone, above or along the subducting slab, possibly in association with dehydration fluids derived from the slab. The previously documented small magnitude of S-wave splitting can be explained by the seismic properties of B-type peridotites within an anisotropic layer of approximately several kilometers in thickness, oriented by flow parallel to the subducting slab, under maximum temperatures of 880-1030 degrees C depending on the flow stress. These findings indicate that such a B-type layer could constitute a dominant source of seismic S- and P-wave anisotropy in mantle wedge regions. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00412594
https://hal.archives-ouvertes.fr/hal-00412594
DOI : 10.1016/j.epsl.2008.06.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Site U1309 was drilled at Atlantis Massif, an oceanic core complex, at 30 degrees N on the Mid-Atlantic Ridge (MAR). We present the results of a bulk rock geochemical study (major and trace elements) carried out on 228 samples representative of the different lithologies sampled at this location. Over 96% of Hole U1309D is made up of gabbroic rocks. Diabases and basalts cross-cut the upper part of the section; they have depleted MORB compositions similar to basalts sampled at MAR 30 degrees N. Relics of mantle were recovered at shallow depth. Mantle peridotites show petrographic and geochemical evidence of extensive melt-rock interactions. Gabbroic rocks comprise: olivine-rich troctolites (>70% modal olivine) and troctolites having high Mg# (82-89), high Ni (up to 2300 ppm) and depleted trace element compositions (Yb 0.06-0.8 ppm); olivine gabbros and gabbros (including gabbronorites) with Mg# of 60-86 and low trace element contents (Yb 0.125-2.5 ppm); and oxide gabbros and leucocratic dykes with low Mg# (<50), low Ni (similar to 65 ppm) and high trace element contents (Yb up to 26 ppm). Troctolites and gabbros are amongst the most primitive and depleted oceanic gabbroic rocks. The main geochemical characteristics of Site U1309 gabbroic rocks are consistent with a formation as a cumulate sequence after a common parental MORB melt, although (lack of systematic) downhole variations indicate that the gabbroic series were built by multiple magma injections. In detail, textural and geochemical variations in olivine-rich troctolites and gabbronorites suggest chemical interaction (assimilation?) between the parental melt and the intruded lithosphere. Site U1309 gabbroic rocks do not represent the complementary magmatic product of 30 degrees N volcanics, although they sample the same mantle source. The bulk trace element composition of Site U1309 gabbroic rocks is similar to primitive MORB melt compositions; this implies that there was no large scale removal of melts from this gabbro section. The occurrence of such a large magmatic sequence implies that a high magmatic activity is associated with the formation of Atlantis Massif. Our results suggest that almost all melts feeding this magmatic system stays trapped into the intruded lithosphere.
ISSN: 0012-821X

hal-00413562
https://hal.archives-ouvertes.fr/hal-00413562
DOI : 10.1016/j.epsl.2008.12.034

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
In the Oman ophiolite crustal section, a contact zone between the gabbro unit and the volcanics and diabase sheeted dikes, called the root zone of the sheeted dike complex, has been recently mapped at a fine scale in a selected area. The Oman ophiolite is derived from a fast spreading ridge which had a melt lens located between the main gabbro unit and the root zone of the sheeted dike complex. With a few exceptions accounted for, this horizon has a fairly constant thickness, similar to 100 m, and a crude internal pseudo-stratigraphy. At the base of the root zone are isotropic ophitic gabbros interpreted as a thermal boundary layer. This layer is transitional between the magmatic system of the melt lens, convecting at 1200 degrees C, and a high-temperature (< 1100 degrees C) hydrothermal system, convecting within the root zone. Above this level, the isotropic gabbros have been, locally, largely molten due to an influx of seawater, at similar to 1100 degrees C, thus generating varitextured ophitic and pegmatitic gabbros. These latter gabbros constitute the upper part of the root zone and are associated with trondjhemitic intrusions as screens in the lower sheeted dikes. Diorites and trondjhemites were also generated by hydrous melting, at temperatures below 1000 degrees C. The whole root zone is a domain of very sharp average thermal gradient (similar to 7 degrees C/m). At the top of the root zone, a new thermal boundary layer, with diabase dikes hydrated in amphibolite facies conditions, separates the preceding high- temperature convective system from the well-known greenschist facies (< 450 degrees C) hydrothermal system operating throughout the sheeted dike complex, up to the seafloor. The isotropic gabbros near the base of the root zone are intruded by protodikes with distinctive microgranular margins and an ophitic center. Protodike swarms are exceptional because, intruding a medium at similar to 1100 degrees C, they are largely destroyed by dike-in-dike intrusions and by hydrous melting. However, they demonstrate that this zone was generated by melt conduits issued from the underlying melt lens. Each dike of the sheeted dike complex is thus fed by one protodike. As this zone has been recently drilled by IODP in the eastern Pacific Ocean, a brief comparison is proposed.
ISSN: 1525-2027

hal-00411331
https://hal.archives-ouvertes.fr/hal-00411331
DOI : 10.1029/2007GC001918

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Talc is a hydrous magnesium rich layered silicate that is widely disseminated in the Earth from the seafloor to over 100 km depth, in ultra-high pressure metamorphism of oceanic crust. In this paper we determine the single crystal elastic constants at pressures from 0 to 12 GPa of talc triclinic (C 1¯) and monoclinic (C2/c) polytypes using ab initio methods. We find that talc has an extraordinarily high elastic anisotropy at zero pressure that reduces with increasing pressure. The exceptional anisotropy is complemented by a negative Poisson's ratio for many directions in crystal space. Calculations show that talc is not only one of very few common minerals to exhibit auxetic behaviour, but the magnitude of this effect may be the largest reported so far for a mineral. The compression (Vp) and shear (Vs) wave velocity anisotropy is 80% and 85% for the triclinic polytype. At pressures where talc is known be stable in the Earth (up to 5 GPa) the Vp and Vs anisotropy is reduced to about 40% for both velocities, which is still a very high value. Vp is slow parallel to the c-axis and fast perpendicular to it. This remains unchanged with increasing pressure and is observed in both polytypes. The shear wave splitting (difference between fast and slow S-wave velocities) at low pressure has high values in the plane normal to the c-axis, with a maximum near the alow asterisk-axis in the triclinic and the b-axis in the monoclinic polytype. The c-axis is the direction of minimum splitting. The pattern of shear wave splitting does not change significantly with pressure. The volume fraction of talc varies between 11 and 41% for hydrated mantle rocks, but the lack of data on the crystallographic preferred orientation (CPO) precludes a detailed analysis of the impact of talc on seismic anisotropy in subduction zones. However, it is highly likely that CPO can easily develop in zones of deformation due to the platy habit of talc crystals. For random aggregates of talc, the isotropic Vp, Vs and Vp/Vs ratio have significantly lower values than those of antigorite and may explain low-velocity regions in the mantle wedge. Vp/Vs ratios are more complex in anisotropic media because there are fast and slow S-waves, resulting in Vp/Vs1 and Vp/Vs2 ratios for every propagation direction, making interpretation difficult in deformed polycrystalline talc with a CPO. Talc on the subduction plate boundary can strongly influence guided wave velocity as CPO would develop in this region of intense shearing. The very low coefficient of friction (< 0.1) of talc above 100 °C could also explain silent earthquakes at shallow depths (ca 30 km) along the subduction plate boundaries, frequently responsible for tsunami.
ISSN: 0012-821X

hal-00411481
https://hal.archives-ouvertes.fr/hal-00411481
DOI : 10.1016/j.epsl.2008.07.047

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We herein focus on understanding what controls the detachment and migration of oceanic crustal slices along subduction zones. We provide evidence for the coeval Middle to Late Cretaceous exhumation of oceanic blueschists in the same Neotethyan subduction zone, across more than 3000 km, from depths around 30-40 km, over a short time interval (similar to 25 Ma) compared to the duration of subduction (>100 Ma). We stress the importance of such a geodynamic process and suggest that this exhumation was promoted by a regional-scale change in the long-term interplate mechanical coupling. On the basis of geological and geophysical evidence, we propose that the upward migration of oceanic fragments in subduction zones is normally inhibited and only occurs discontinuously, as the subduction channel opens up in response to a major change in plate geodynamics, slab geometry and dynamics, mantle wedge and slab hydration, or a combination of these.
ISSN: 1525-2027

hal-00420898
https://hal.archives-ouvertes.fr/hal-00420898
DOI : 10.1029/2009GC002428

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The equilibrium phase relations of a mafic durbachite (53 wt.% SiO2) from the TA (TM) ebi pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338-335 Ma), have been determined as a function of temperature (900-1,100A degrees C), pressure (100-200 MPa), and H2O activity (1.1-6.1 wt.% H2O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni-NiO (NNO) buffer and 2.6 log unit above NNO buffer (a dagger NNO + 2.6). At 1,100A degrees C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000A degrees C for the whole range of investigated pressure and water content in the melt. At 900A degrees C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (< 3-4 wt.% H2O) and T < 900A degrees C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite-clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.
ISSN: 0010-7999

hal-00618418
https://hal.archives-ouvertes.fr/hal-00618418
DOI : 10.1007/s00410-009-0430-5

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : HAL CCSD E Schweizerbart Science Publishers
Résumé : International audience
We present an electron tomography study of dislocations in deformed olivine single crystals, at ca. 0.5 T m, along two distinct orientations. The easiest slip systems are [001](100) and [001]{110}. Disorientating a single crystal away from easy glide conditions leads to massive cross-slip, which generates three-dimensional dislocations, and thus contributes to hardening. Fast motion of curved non-screw dislocation in those planes leaves long straight screw dislocations which bear lattice friction and control plastic strain. We have identified several hardening mechanisms. Non-screw [001] dislocations interact elastically to form dipoles. Recovery mechanisms leading to dipole annihilation are observed, but they are slow at those temperatures and produce numerous sessile loops. These loops represent obstacles for gliding dislocations. Interactions between dislocations and sessile loops produce sessile segments (super jogs), which efficiently impede dislocation motions.
ISSN: 0935-1221

hal-01277821
https://hal.archives-ouvertes.fr/hal-01277821
DOI : 10.1127/ejm/2015/0027-2481

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : The Beni Bousera peridotite contains a diversity of pyroxenite layers. Several studies have postulated that at least some of them represent elongated strips of oceanic lithosphere recycled in the convective mantle. Some pyroxenites were, however, ascribed to igneous crystal segregation or melt–rock reactions. To further constrain the origin of these rocks, we collected 171 samples throughout the massif and examined their variability in relation with the tectono-metamorphic domains. A major finding is that all facies showing clear evidence for a crustal origin are concentrated in a narrow corridor of mylonitized peridotites, along the contact with granulitic country rocks. These peculiar facies were most likely incorporated at the mantle–crust boundary during the orogenic events that culminated in the peridotite exhumation. The other pyroxenites derive from a distinct protolith that was ubiquitous in the massif before its exhumation. They were deeply modified by partial melting and melt–rock reactions associated with lithospheric thinning.
ISSN: 1631-0713

hal-01468018
https://hal.archives-ouvertes.fr/hal-01468018
https://hal.archives-ouvertes.fr/hal-01468018/document
https://hal.archives-ouvertes.fr/hal-01468018/file/chetouani.pdf
DOI : 10.1016/j.crte.2016.06.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use first first-principle methods and the Peierls-Nabarro model to evaluate the resistance to glide, characterized by the Peierls stress, of glide systems for end-member MgSiO3 Perovskite at mantle pressures. [010](100) is the easiest glide system in Mg-Perovskite at all pressures. Peierls stresses increase systematically with pressure for all systems except [001](010), indicating the importance of lattice friction at lower mantle pressures. The ratio of the maximum Peierls stress for each system relative to the [010](100) value defines their critical resolved shear stress (CRSS). These CRSS are used in a visco-plastic self-consistent homogenization model to predict the evolution of crystal preferred orientations (CPO) during deformation of polycrystalline Mg-Perovskite. In axial compression, [100] tends to align with the compression direction, in agreement with in situ observations in axial compression experiments. In simple shear, [010] concentrates near the shear direction and (100), although more dispersed, tends to align near the shear plane, consistent with the dominant activity of the easier [010](100) system. The calculated seismic anisotropy for a 100% Mg-Perovskite aggregate using the CPO in simple shear and the elastic constants Of MgSiO3 perovskite at lower mantle pressures and temperatures is weak (>3% for P-waves with and >2% for S-waves) and decreases with increasing temperature and pressure. P-waves show the fastest propagation parallel to the lineation and S-waves fast polarization is in the foliation at 38 GPa and normal to the lineation at 88 GPa. This weak anisotropy is consistent with global seismological observations of a nearly isotropic lower mantle. There are however two regions where strain-induced Mg-Perovskite CPO could contribute to anisotropy; a) low temperature regions in the uppermost lower mantle, where the predicted S-wave polarization anisotropy may attain 1.6% with a fast polarization parallel to the foliation, b) in high high-temperature domains in the D '' layer, where Mg-Perovskite may be the major stable phase, leading to polarization of fast S-waves normal to the lineation for propagation directions at high angle to the lineation and an apparent isotropy for all other propagation directions.
ISSN: 0012-821X

hal-00411460
https://hal.archives-ouvertes.fr/hal-00411460
DOI : 10.1016/j.epsl.2008.03.058

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : If the net flux to the island arc crust is primitive arc basalt, the evolved composition of most arc magmas entails the formation of complementary thick ultramafic keels at the root of the island arc crust. Dunite, wehrlite, and Cr-rich pyroxenite from the Jijal complex, constituting the Moho transition zone of the Kohistan paleo–island arc (northern Pakistan), are often mentioned as an example of high-pressure cumulates formed by intracrustal fractionation of mantle-derived melts, which were later extracted to form the overlying mafic crust. Here we show that calculated liquids for Jijal pyroxenites-wehrlites are strongly rare earth element (REE) depleted and display flat or convex-upward REE patterns. These patterns are typical of boninites and are therefore unlike those of the overlying mafic crust that have higher REE concentrations and are derived from light rare earth element (LREE)–enriched melts similar to island arc basalt. This observation, along with the lower 208Pb/204Pb and 206Pb/204Pb ratios of Jijal pyroxenites-wehrlites relative to gabbros, rejects the hypothesis that gabbros and ultramafic rocks derive from a common melt via crystal fractionation. In the 208Pb/204Pb versus 206Pb/204Pb diagram, ultramafic rocks and gabbros lie on the same positive correlation, suggesting that their sources share a common enriched mantle 2 (EM2) signature but with a major depleted component contribution for the ultramafic rocks. These data are consistent with a scenario whereby the Jijal ultramafic section represents a Moho transition zone formed via melt-rock reaction between subarc mantle and incoming melt isotopically akin to Jijal gabbroic rocks. The lack in the Kohistan arc of cogenetic ultramafic cumulates complementary to the evolved mafic plutonic rocks implies either (1) that a substantial volume of such ultramafic cumulates was delaminated or torn out by subcrustal mantle flow from the base of the arc crust in extraordinarily short time scales (0.10–0.35 cm/yr), or (2) that the net flux to the Kohistan arc crust was more evolved than primitive arc basalt.
ISSN: 0091-7613

hal-00406688
https://hal.archives-ouvertes.fr/hal-00406688
DOI : 10.1130/G23675A.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyses the interactions between deformation and reactive fluid and melt percolation, and their effects on sub-arc mantle seismic properties based on microstructural observations on mantle xenoliths extracted by the Tubaf and Edison seamounts close to the Lihir Island, in the Papua New Guinea archipelago. These xenoliths sample an oceanic lithosphere, which has experienced high-temperature deformation in the presence of fluids or melts. This was followed by metasomatism under static conditions. Syn-kinematic percolation of reactive Si-rich melts or fluids in peridotites has produced pyroxene-enrichment, grain size reduction, and dispersion of olivine crystal preferred orientation (CPO). Fourier transform infrared spectroscopy analyses show that olivine has very low water contents (1-4 wt. ppm H2O), similar to spinel peridotites from other subduction zones. These low values may record both low water solubility in olivine at low pressure and dehydration during transport and exhumation. Water contents in pyroxenes are highly variable and likely result from spatially heterogeneous melt or fluid percolation. Analysis of olivine CPO indicates dominant activation of both (010)[100] and (001)[100] slip systems, which are characteristic of deformation under high temperature, low stress, low pressure and low to moderate hydrous conditions. Fast S-wave polarization and P- and Rayleigh propagation directions are thus parallel to the mantle flow direction. The pyroxene enrichment by melt-rock reactions is accompanied by dispersion of olivine CPO and induces a significant decrease of the maximum S-wave and P-wave anisotropy in the peridotites. The calculated seismic properties also show that the lowest Vp/Vs ratios (< 1.7) mapped in fore-arc mantle may only be explained by taking in consideration the CPO-induced elastic anisotropy of the peridotites.
ISSN: 0040-1951

hal-00950058
https://hal.archives-ouvertes.fr/hal-00950058
DOI : 10.1016/j.tecto.2013.09.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tso Morari serpentinites in the Ladakh area, northwest Himalaya, originated from the forearc mantle overlying the northward subducting Neo-Tethys lithosphere and the margin of the Indian continent. The serpentinites are characterized by high concentration of fluid-mobile elements (FME: As, Sb, B, Li, and U) compared to ophiolitic or abyssal serpentinites. The Pb isotopic compositions of serpentinites show influence of the subducted Indian continental lithosphere. Trace element concentrations of antigorite determined in situ with Laser Ablation High Resolution Inductively Coupled Mass Spectrometer (LA-HR-ICP-MS) show high contents of FME including Pb, in contrast to the spatially associated iron oxides. Rare earth elements (REE) and compatible elements, such as Sc and Co, remained immobile during the hydration, allowing the identification of the primary minerals (olivine or orthopyroxene) from which serpentine formed. Serpentinized olivine displays higher Sb and As concentrations (up to 1000 x PM) than serpentinized orthopyroxenes that are enriched in Pb, Cs and Li (2 to up to 10 x PM).;We propose that the observed FME distribution in two types of serpentine reflect the differential incorporation of FME during the downward movement of the serpentinite along the subduction plane. At temperature lower than 400 degrees C, at shallow depths, olivine is preferentially serpentinized and incorporates elements that are fluid soluble at low temperatures, such as Sb and As. Above 400 degrees C, orthopyroxene is hydrated and incorporates Pb, Cs, Li and possibly Ba. Boron and U are incorporated in both types of serpentine suggesting that they are released from slabs at temperatures around 300-400 degrees C. The serpentine acts as a sink for water, but also for FME and transports them to deeper and hotter levels in the mantle, down to the isotherm 600-650 degrees C where dehydration occurs.
ISSN: 0009-2541

hal-00475565
https://hal.archives-ouvertes.fr/hal-00475565
DOI : 10.1016/j.chemgeo.2009.10.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic tomography and high surface heat flow models indicate an anomalously thin and hot lithospheric mantle beneath the Canadian Cordillera. To understand the thermal and deformational history of the lithospheric mantle under these conditions, we performed a study of the microstructures, crystal preferred orientations (CPO), and seismic anisotropy of mantle xenoliths collected in the Summit Lake volcano in the southern Canadian Cordillera. The xenoliths vary in composition between spinel lherzolites, cpx-rich lherzolites, and wehrlites. All samples are coarse-grained and show clear evidence for annealing, but deformation microstructures are well-preserved in the spinel lherzolites. Olivine CPO is characterized by a strong point-maximum of [100] and by a girdle distribution of [010[ and [001] axes normal to it; CPO strength is variable, spinel-lherzolites have the strongest CPO. Some samples show a weak orthopyroxene CPO consistent with the olivine one. However most pyroxenes have random CPO, interstitial shapes and undeformed appearance, which suggest a secondary origin by reactive melt percolation under static conditions, leading to crystallization of cpx + sp +/- opx at the expenses of olivine, followed by crystallization of cpx + sp +/- ol at the expenses of opx to produce the wehrlites. The studied xenoliths have typical upper mantle seismic properties patterns with fastest propagation of P-waves and polarization of S-waves parallel to the olivine [100] maxima. Maximum P- and S-waves anisotropy for lherzolites are 8 and 5% respectively. Dispersion of the olivine CPO due to neocrystallization of olivine results in weaker anisotropies (6.5 and 3.5%) in wehrlites. Seismic velocities calculated using a geotherm consistent with the equilibrium temperatures of the Summit Lake xenoliths are 3-4% lower than those expected in a normal, 100 km-thick lithosphere, consistent with seismic tomography models for the region. This high geothermal gradient may be partially explained by considering the anisotropy of thermal conductivity of olivine and subhorizontal foliations in the lithospheric mantle, which result in a decrease by up to 15% of the thermal conductivity in the vertical direction.
ISSN: 0040-1951

hal-00618332
https://hal.archives-ouvertes.fr/hal-00618332
DOI : 10.1016/j.tecto.2011.04.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cerro del Almirez massif (Nevado–Filábride Complex, Betic Cordillera, SE Spain) is composed of antigorite (Atg-) serpentinite and chlorite (Chl-) harzburgite separated by a thin reaction front formed in a palaeo-subduction setting. These ultramafic rocks preserve unique prograde structures related to the pre- and peak high-pressure event (1.6–1.9 GPa and 680–710 °C). The oldest subduction-related structures are preserved in Atg-serpentinites: a penetrative S1 foliation and associated L1 stretching lineation that formed in a non-coaxial regime with a top-to-the-W sense of shear. This planar–linear fabric is crosscut by olivine ± Ti-clinohumite veins, formed during the prograde breakdown of brucite and pre-metamorphic clinopyroxene, which form a system of veins decimetres long. They record embrittlement processes due to the release of 6 vol.% of H2O associated with brucite dehydration. The growth of prograde olivine and/or tremolite porphyroblasts is syn- to post-kinematic in relation to the S1 foliation. Further reactions at higher temperature related to the complete breakdown of the Atg (i.e. Atg-out) are post-kinematic to S1. Prograde Chl-harzburgite is crosscut by sets of conjugate zones associated with grain-size reduction of olivine grains. These grain-size reduction zones are interpreted as brittle structures generated by hydrofracturing due to overpressure fluids in a compressional setting at low-differential stresses.Structures related to the exhumation process are mainly preserved in the metasedimentary host rock, where an S2/L2 planar–linear fabric developed within a shear zone dominated by a non-coaxial regime with a top-to-the-W sense of movement in a transpressional regime. Peak metamorphic conditions deduced for the schists are similar in pressure (1.3–1.9 GPa) but lower in temperature (560–590 °C) compared to the ultramafic rocks in contact with them, suggesting a major shear zone at the base of the ultramafic massif during D2 deformation in a right-handed transpressional regime.
ISSN: 0040-1951

hal-01172303
https://hal.archives-ouvertes.fr/hal-01172303
DOI : 10.1016/j.tecto.2014.12.022

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Garnet growth in high-pressure, mafic garnet granulites formed by dehydration melting of hornblende-gabbronorite protoliths in the Jijal complex (Kohistan palaeo-island arc complex, north Pakistan) was investigated through a microstructural EBSD-SEM and HRTEM study. Composite samples preserve a sharp transition in which the low-pressure precursor is replaced by garnet through a millimetre-sized reaction front. A magmatic foliation in the gabbronorite is defined by mafic-rich layering, with an associated magmatic lineation defined by the shape-preferred orientation (SPO) of mafic clusters composed of orthopyroxene (Opx), clinopyroxene (Cpx), amphibole (Amp) and oxides. The shape of the reaction front is convoluted and oblique to the magmatic layering. Opx, Amp and, to a lesser extent, Cpx show a strong lattice-preferred orientation (LPO) characterized by an alignment of [001] axes parallel to the magmatic lineation in the precursor hornblende-gabbronorite. Product garnet (Grt) also displays a strong LPO. Two of the four < 111 > axes are within the magmatic foliation plane and the density maximum is subparallel to the precursor magmatic lineation. The crystallographic relationship < 111 >(Grt)//[001](Opx,Cpx,Amp) deduced from the LPO was confirmed by TEM observations. The sharp and discontinuous modal and compositional variations observed at the reaction front attest to the kinetic inhibition of prograde solid-state reactions predicted by equilibrium-phase diagrams. The P-T field for the equilibration of Jijal garnet granulites shows that the reaction affinities are 5-10 kJ mol.(-1) for the Grt-in reaction and 0-5 kJ mol.(-1) for the Opx-out reaction. Petrographic and textural observations indicate that garnet first nucleated on amphibole at the rims of mafic clusters; this topotactic replacement resulted in a strong LPO of garnet. Once the amphibole was consumed in the reaction, the parallelism of [001] axes of the mafic-phase reactants favoured the growth of garnet crystals with similar orientations over a pyroxene substrate. These aggregates eventually sintered into single-crystal garnet. In the absence of deformation, the orientation of mafic precursor phases conditioned the nucleation site and the crystallographic orientation of garnet because of topotaxial transformation reactions and homoepitaxial growth of garnet during the formation of high-pressure, mafic garnet-granulite after low-pressure mafic protoliths.
ISSN: 0263-4929

hal-00411323
https://hal.archives-ouvertes.fr/hal-00411323
DOI : 10.1111/J.1525-1314.2008.00789.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : Differentiation of the Earth's mantle and formation of continental and oceanic crust occur principally through partial melting and extraction of basaltic melt. Among the mantle rocks occurring at the Earth's surface, as tectonically-emplaced massifs, abyssal peridotites or xenoliths, the harzburgites (< 5% clinopyroxene) are widely considered as refractory mantle residues left after extraction of a basaltic component. In contrast, the most fertile lherzolites (15% clinopyroxene) are generally regarded as pristine mantle, only weakly affected by partial melting. In this paper we present new convergent structural and geochemical data from the Lherz massif, the type-locality of lherzolite, indicating that the lherzolites from Lherz do not represent pristine mantle. Detailed structural mapping clearly shows that the lherzolites are secondary rocks formed at the expense of the harzburgites. Variations of major, minor and trace elements through the harzburgite–lherzolite contacts indicate that the lherzolites were formed through a refertilization process involving interaction of refractory, lithospheric mantle with upwelling asthenospheric partial melts. Combined with previously published indications of refertilization in orogenic peridotites, our new observations in Lherz suggest that most lherzolite massifs represent secondary (refertilized) rather than pristine mantle. Together with geochemical data on mantle xenoliths, this indicates that melt transport and melt-rock reaction play a key role on the rejuvenation and erosion of the lithospheric mantle.
ISSN: 0012-821X

hal-00406433
https://hal.archives-ouvertes.fr/hal-00406433
DOI : 10.1016/j.epsl.2007.05.026