Éditeur(s) : HAL CCSD
Résumé : Different applications of linear elasticity in structural geology are presented in this thesis through the development of three types of numerical computer codes. The first one uses forward modeling to study displacement and perturbed stress fields around complexly faulted regions. We show that incorporating inequality constraints, such as static Coulomb friction, enables one to explain the angle of initiation of jogs in extensional relays. Adding heterogeneous material properties and optimizations, such as parallelization on multicore architectures and complexity reduction, admits more complex models. The second type deals with inverse modeling, also called parameter estimation. Linear slip inversion on faults with complex geometry, as well as paleo-stress inversion using a geomechanical approach, are developed. The last type of numerical computer code is dedicated to restoration of complexly folded and faulted structures. It is shown that this technique enables one to check balanced cross-sections, and also to retrieve fault chronology. Finally, we show that this code allows one to smooth noisy 3D interpreted faulted and folded horizons using geomechanics.
Différentes applications de l'élasticité linéaire en géologie structurale sont présentées dans cette thèse à travers le développement de trois types de codes numériques. Le premier utilise la modélisation directe pour étudier les déplacements et champs de contraintes autour de zones faillées complexes. On montre que l'ajout de contraintes inégalitaires, telles que la friction de Coulomb, permet d'expliquer l'angle d'initiation des dominos dans les relais extensifs. L'ajout de matériaux hétérogènes et d'optimisations, telles la parallélisation sur processeurs multi-coeurs ainsi que la réduction de complexité des modèles, permettent l'étude de modèles beaucoup plus complexes. Le second type de code numérique utilise la modélisation inverse, aussi appelée estimation de paramètres. L'inversion linéaire de déplacements sur les failles ainsi que la détermination de paléo-contraintes utilisant une approche géomécanique sont développées. Le dernier type de code numérique concerne la restauration de structures complexes plissées et faillées. Il est notamment montré qu'une telle méthode permet de vérifier l'équilibre de coupes géologiques, ainsi que de retrouver la chronologie des failles. Finalement, nous montrons que ce même code permet de lisser des horizons 3D faillés, plissés et bruités en utilisant la géomécanique.
https://tel.archives-ouvertes.fr/tel-00537899

tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899/document
https://tel.archives-ouvertes.fr/tel-00537899/file/thesemaerten.pdf

Éditeur(s) : HAL CCSD E Schweizerbart Science Publishers
Résumé : International audience
We present an electron tomography study of dislocations in deformed olivine single crystals, at ca. 0.5 T m, along two distinct orientations. The easiest slip systems are [001](100) and [001]{110}. Disorientating a single crystal away from easy glide conditions leads to massive cross-slip, which generates three-dimensional dislocations, and thus contributes to hardening. Fast motion of curved non-screw dislocation in those planes leaves long straight screw dislocations which bear lattice friction and control plastic strain. We have identified several hardening mechanisms. Non-screw [001] dislocations interact elastically to form dipoles. Recovery mechanisms leading to dipole annihilation are observed, but they are slow at those temperatures and produce numerous sessile loops. These loops represent obstacles for gliding dislocations. Interactions between dislocations and sessile loops produce sessile segments (super jogs), which efficiently impede dislocation motions.
ISSN: 0935-1221

hal-01277821
https://hal.archives-ouvertes.fr/hal-01277821
DOI : 10.1127/ejm/2015/0027-2481

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use first first-principle methods and the Peierls-Nabarro model to evaluate the resistance to glide, characterized by the Peierls stress, of glide systems for end-member MgSiO3 Perovskite at mantle pressures. [010](100) is the easiest glide system in Mg-Perovskite at all pressures. Peierls stresses increase systematically with pressure for all systems except [001](010), indicating the importance of lattice friction at lower mantle pressures. The ratio of the maximum Peierls stress for each system relative to the [010](100) value defines their critical resolved shear stress (CRSS). These CRSS are used in a visco-plastic self-consistent homogenization model to predict the evolution of crystal preferred orientations (CPO) during deformation of polycrystalline Mg-Perovskite. In axial compression, [100] tends to align with the compression direction, in agreement with in situ observations in axial compression experiments. In simple shear, [010] concentrates near the shear direction and (100), although more dispersed, tends to align near the shear plane, consistent with the dominant activity of the easier [010](100) system. The calculated seismic anisotropy for a 100% Mg-Perovskite aggregate using the CPO in simple shear and the elastic constants Of MgSiO3 perovskite at lower mantle pressures and temperatures is weak (>3% for P-waves with and >2% for S-waves) and decreases with increasing temperature and pressure. P-waves show the fastest propagation parallel to the lineation and S-waves fast polarization is in the foliation at 38 GPa and normal to the lineation at 88 GPa. This weak anisotropy is consistent with global seismological observations of a nearly isotropic lower mantle. There are however two regions where strain-induced Mg-Perovskite CPO could contribute to anisotropy; a) low temperature regions in the uppermost lower mantle, where the predicted S-wave polarization anisotropy may attain 1.6% with a fast polarization parallel to the foliation, b) in high high-temperature domains in the D '' layer, where Mg-Perovskite may be the major stable phase, leading to polarization of fast S-waves normal to the lineation for propagation directions at high angle to the lineation and an apparent isotropy for all other propagation directions.
ISSN: 0012-821X

hal-00411460
https://hal.archives-ouvertes.fr/hal-00411460
DOI : 10.1016/j.epsl.2008.03.058

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Seismic reflection profiles from the sediment rich Alaska subduction zone image short, frontally accreted, imbricate thrust slices and repeated sequences of long, underthrust sheets. Rapid landward increases in wedge thickness, backthrusting, and uplift of the forearc are observed, suggesting underthrusting beneath the wedge. These features and a widely varying frontal wedge morphology are interpreted to be caused by different modes of accretion active concurrently along the trench at different locations. Episodic wedge growth is observed in high basal friction experiments using sand as an analog material. Two phases of an accretionary cycle can be distinguished: frontal accretion of short imbricate thrust slices, alternating with underthrusting of long, undeformed sheets. The phase is shown experimentally to depend upon the surface slope of the wedge. Mechanical analysis of the forces at work predicts these two modes of deformation due to the varying frictional forces and yield strengths for a temporally varying wedge geometry. Maximum length of thrust slices is calculated for experimental conditions and confirmed by the observations. For a steep frontal slope (at the upper limit of the Mohr-Coulomb taper stability field) the overburden is too great to permit underthrusting, and failure occurs repeatedly at the wedge front producing short imbricate slices. The wedge grows forward, lowering the surface angle to the minimum critical taper. For a shallow frontal slope the reduced overburden along an active roof thrust permits sustained underthrusting, causing frontal erosion and backthrusting, steepening the wedge and thus completing the cycle.
ISSN: 0148-0227

hal-01261538
https://hal.archives-ouvertes.fr/hal-01261538
https://hal.archives-ouvertes.fr/hal-01261538/document
https://hal.archives-ouvertes.fr/hal-01261538/file/gutscherJGR1998.pdf

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fluid-rock interactions can control earthquake nucleation and the evolution of earthquake sequences. Experimental studies of fault frictional properties in the presence of fluid can provide unique insights into these interactions. We report the first results from experiments performed on cohesive silicate-bearing rocks (microgabbro) in the presence of pressurized pore fluids (H2O, drained conditions) at realistic seismic deformation conditions. The experimental data are compared with those recently obtained from carbonate-bearing rocks (Carrara marble). Contrary to theoretical arguments, and consistent with the interpretation of some field observations, we show that frictional melting of a microgabbro develops in the presence of water. In microgabbro, the initial weakening mechanism (flash melting of the asperities) is delayed in the presence of water; conversely, in calcite marble the weakening mechanism (brittle failure of the asperities) is favored. This opposite behavior highlights the importance of host-rock composition in controlling dynamic (frictional) weakening in the presence of water: cohesive carbonate-bearing rocks are more prone to slip in the presence of water, whereas the presence of water might delay or inhibit the rupture nucleation and propagation in cohesive silicate-bearing rocks.
ISSN: 0091-7613

hal-01054327
https://hal.archives-ouvertes.fr/hal-01054327
DOI : 10.1130/G34916.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The reactivation of faults with near-optimal orientations is commonly considered to control the state of stress in the crust. Near the surface, where a principal stress direction is vertical, the attitude of such faults is explained by Anderson's theory. This raises the questions of how prevalent this type of faulting actually is in current seismicity, down to what depth it frequently occurs, and what range of friction angles explains it best. The Global Centroid Moment Tensor catalog is analyzed to address these questions. Dip-slip and strike-slip mechanisms are dominant, and oblique slips are relatively rare for well-constrained events with depths shallower than 30 km. Preferred Andersonian faulting is the simplest, but not the unique, explanation for this dominance. Isolating reverse, strike- slip, and normal events reveals an asymmetry in the distribution of nodal plane dips and plunges of the P, B, and T axes between reverse and normal faulting. Assuming that the most frequent events correspond to reactivation near optimal orientations yields 40-60 degrees and 0-20 degrees friction angles for reverse and normal faults, respectively. This indicates that reverse and normal faulting mechanics are not symmetrical with respect to stress configuration as predicted by Anderson's theory.
ISSN: 8755-1209

hal-00412159
https://hal.archives-ouvertes.fr/hal-00412159
DOI : 10.1029/2007RG000240

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wallace (1951) and Bott (1959) were the first to introduce the idea that the slip on each fault surface has the same direction and sense as the maximum shear stress resolved on that surface. However, this simplified hypothesis is questionable since fault mechanical interactions may induce slip reorientations. Earlier numerical geomechanical models confirmed that the slickenlines (slip vectors) are not necessarily parallel to the maximum resolved shear stress but are consistent with local stress perturbations. This leads us to ask as to what extent the Wallace and Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. Here, a geomechanical multi-parametric study using a 3D boundary element method, covering (i) fault geometries such as intersected faults or corrugated fault surfaces, (ii) the full range of Andersonian state of stress, (iii) fault friction, (iv) fault fluid pressure, (v) half space effect and (vi), rock properties, is performed in order to understand the effect of each parameter on the misfit angle between geomechanical slip vectors and the resolved shear stresses. It is shown that significant misfit angles can be found under specific configurations invalidating the Wallace and Bott assumptions, even though fault friction tends to minimize the misfit. We therefore conclude that in such cases, stress inversions based on fault slip data should be interpreted with care.
ISSN: 0040-1951

hal-01218418
https://hal.archives-ouvertes.fr/hal-01218418
DOI : 10.1016/j.tecto.2015.06.030

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004

Éditeur(s) : HAL CCSD
Résumé : International audience
In boundary lubrication regime, friction reduction and antiwear processes are associated to the presence of additives in the lubricating oils or greases. These processes are due to the formation of protective tribofilms resulting from chemical reactions between the additives and the sliding surfaces, in the physico-chemical conditions of the sliding contact. Conventional antiwear additives mainly consist of transition metal organo phosphate or thiophosphates which present a remarkable efficiency in the case of contacts between ferrous alloys. In the case of non reacting surfaces, these additives become inactive. Recently developped lubrication strategies consist in the use of dispersion in oils of nano additives able to build the protective tribofilm in the sliding contact without reaction with the surfaces. Carbon fluorinated phases, due to their lamellar structure and their high chemical stability even at relatively high temperature (400°C) represent interesting candidates as lubricant nano-additives subjected to present friction reduction, anti wear and anti corrosion actions. This work presents the tribologic behaviour of some carbon fluorinated derivatives such as graphite fluorides, fluorinated carbon nanofibers, fluorinated carbon nanodiscs and fluorinated carbon blacks. The influence, on the tribologic performances, of the structure of the initial carbon phases, of the fluorination rate (0
World Tribology Congress 2013
Torino, Italy

Droits : info:eu-repo/semantics/OpenAccess
hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514/document
https://hal.archives-ouvertes.fr/hal-00926514/file/Delbe_9783.pdf
OATAO : 9783

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 2004 Aceh and 2005 Nias events are the two greatest earthquakes of the past 40 years with a total rupture of 1700 km long and a coseismic slip reaching up to 25 m. These two earthquakes have caused large stress perturbations which significantly altered seismic activity in the Sumatra-Andaman region. Using both detailed mapping of failure planes and various slip distributions, we calculate this stress change along the Sumatra-Andaman-Sagaing fault system from central Sumatra to southern Myanmar. The static Coulomb stress change Delta CFF and the observed seismic activity are in very good agreement with a Coulomb index similar to 20% greater than the one obtained for random events. Compared to previous studies, this high Coulomb Index confirms two important issues on the use of static stress change criterion: unsuited to study near-field aftershocks and only relevant for aftershocks analysis on large and mature faults at a time scale of several months. The calculated Delta CFF distribution suggests that the 2004 and 2005 earthquakes inhibit failure on the North Andaman rift and on the Sagaing fault, while failure is encouraged along the transform Andaman zone, the central Andaman rift, the West Andaman fault, the Sumatra fault system, and the offshore thrust faults west of Sumatra Island. The maximum value of similar to 15-20 bar (1.5-2 MPa) for Delta CFF is reached in the northern part of the Sumatra fault system. This high value together with the lack of major earthquake in the last 170 years result in a high seismic hazard for this region. Our results are also consistent with temporal evolution of both earthquakes' location and focal mechanism prior to and after the events. In particular, we explain the occurrence and the mechanism of seismic swarms observed in the central Andaman rift and along the west Andaman fault. Finally, our calculations reveal that the seismicity in the Andaman rift zone can only be explained if mu' > 0.5. This result leads to two end-member models: one with a constant and high fault friction and one with spatial variations, for which friction may depend on either the nature of the lithosphere (oceanic versus continental) or the fault type.
ISSN: 1525-2027

hal-00456027
https://hal.archives-ouvertes.fr/hal-00456027
DOI : 10.1029/2008GC002167

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gaps in their structure through which interlayer interactions are weak. The controlled variation of the distances and interactions between graphene layers by intercalation of electrophilic species in graphite is used in order to explore more deeply the friction reduction properties of low-dimensional compounds. Three graphite intercalation compounds with antimony pentachloride, iron trichloride and aluminium trichloride are studied. Their tribological properties are correlated to their structural parameters, and the interlayer interactions are deduced from ab initio bands structure calculations.
ISSN: 1023-8883

hal-00767639
https://hal.archives-ouvertes.fr/hal-00767639
https://hal.archives-ouvertes.fr/hal-00767639/document
https://hal.archives-ouvertes.fr/hal-00767639/file/Delbe_6330.pdf
DOI : 10.1007/s11249-012-9981-0

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fault pseudotachylytes form by frictional melting during seismic slip and therefore are widely interpreted as “earthquake fossils.” Rapid movement along a rupture surface typically forms a pseudotachylyte generation vein, the thickness of which increases with earthquake magnitude. The direction and sense of seismic slip cannot always be determined due to the generally complex geometry of pseudotachylyte veins. Here we show, for the first time, that the orientation of the magnetic fabric of fault pseudotachylytes indicates both direction and sense of seismic slip. The magnetic fabric, acquired in a manner similar to that of other magmas, arises in this case from the asymmetric preferred orientation of paramagnetic grains during viscous shear of the friction melt. This kinematic information, coupled with fault plane orientation and generation vein thickness, provides new and critical insight for the earthquake focal mechanism. The magnetic fabric of pseudotachylytes therefore not only constitutes a valuable kinematic criterion for these fault rocks, but also could expand our knowledge of prehistoric seismic events.
ISSN: 0091-7613

hal-01217133
https://hal.archives-ouvertes.fr/hal-01217133
DOI : 10.1130/G36587.1

Éditeur(s) : HAL CCSD
Résumé : National audience
New experimental data on electrical and anelastic properties of oceanic rocks at high pressures and temperatures are compared with the field data of seismic and electrical anomalies observed at oceanic spreading centers. The laboratory results of electrical conductivity and internal friction on gabbro and peridotites permit to estimate a degree of partial melting and maximum temperature in axial magma chambers (12-15% of melting at 1155-1165°C) and at the upper boundary of a source zone at the depth of 40-90 km (less than 5% of melting in the absence of pyroxene crystals and up to 11-14% in the pyroxene reach rocks at 1360-1370°C) at mid-oceanic ridges.
ISSN: 0934-6554

hal-01322920
http://hal.univ-reunion.fr/hal-01322920

Éditeur(s) : HAL CCSD Techno-Press
Résumé : Fractures and faults riddle the Earth’s crust on all scales, and the deformation associated with them is presumed to have had significant effects on its petrological and structural evolution. However, despite the abundance of directly observable earthquake activity, unequivocal evidence for seismic slip rates along ancient faults is rare and usually related to frictional melting and the formation of pseudotachylites. We report novel microstructures from garnet crystals in the immediate vicinity of seismic slip planes that transected lower crustal granulites during intermediate-depth earthquakes in the Bergen Arcs area, western Norway, some 420 million years ago. Seismic loading caused massive dislocation formations and fragmentation of wall rock garnets. Microfracturing and the injection of sulfide melts occurred during an early stage of loading. Subsequent dilation caused pervasive transport of fluids into the garnets along a network of microfractures, dislocations, and subgrain and grain boundaries, leading to the growth of abundant mineral inclusions inside the fragmented garnets. Recrystallization by grain boundary migration closed most of the pores and fractures generated by the seismic event. This wall rock alteration represents the initial stages of an earthquake-triggered metamorphic transformation process that ultimately led to reworking of the lower crust on a regional scale.
ISSN: 2287-528X

hal-01553309
https://hal.archives-ouvertes.fr/hal-01553309
https://hal.archives-ouvertes.fr/hal-01553309/document
https://hal.archives-ouvertes.fr/hal-01553309/file/austrheim2017.pdf
DOI : 10.1126/sciadv.1602067

Éditeur(s) : HAL CCSD EDP Sciences
Résumé : International audience
In the setting of a real Hilbert space H, we investigate the asymptotic behavior, as time t goes to infinity, of trajectories of second-order damped evolution equations, which are governed by the sum of the gradient operator of a convex differentiable potential function , and a maximal monotone operator which is assumed to be cocoercive. Under a sharp condition involving the viscous and the cocoercive parameters, it is proved that each trajectory weakly converges to an equilibrium. Passing from weak to strong convergence is obtained by introducing an asymptotically vanishing Tikhonov-like regularizing term. As special cases, we recover the asymptotic analysis of the heavy ball with friction dynamic attached to a convex potential, the second-order gradient-projection dynamic, and the second-order dynamic governed by the Yosida approximation of a general maximal monotone operator. The breadth and flexibility of the proposed framework is illustrated through applications in the areas of constrained optimization, dynamical approach to Nash equilibria for noncooperative games, and asymptotic stabilization in the case of a continuum of equilibria.
ISSN: 1292-8119

hal-00803774
https://hal.archives-ouvertes.fr/hal-00803774
https://hal.archives-ouvertes.fr/hal-00803774/document
https://hal.archives-ouvertes.fr/hal-00803774/file/ATTOUCH-MAINGE-09-04-2010-COCV.pdf
DOI : 10.1051/cocv/2010024

Éditeur(s) : HAL CCSD
Résumé : soutenue le 09 juin 2008
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gap in their structure. The controled variation of the graphite's crystal and electronic structure by intercalation processes of different species (electrophile, nucleophile ...) give a possibility to study in a more deeply way the friction reduction processes for low dimensional compounds. Three groups of intercalant are studied and tribological properties are correlated to structural and chemical evolutions.
Les propriétés tribologiques intrinsèques des composés lamellaires sont généralement attribuées à la présence de gap de van der Waals dans leur structure. La possibilité de faire varier de manière contrôlée la structure cristalline et la structure électronique du graphite par processus d'intercalation de différentes espèces chimiques (électrophile, nucléophile ...) sont utilisées pour étudier de façon plus approfondie les processus de réduction du frottement par les composés de basse dimensionnalité. Trois familles d'intercalants sont étudiées et les propriétés tribologiques sont corrélées aux évolutions structurales et chimiques.
https://tel.archives-ouvertes.fr/tel-00431713

Droits : info:eu-repo/semantics/OpenAccess
tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713/document
https://tel.archives-ouvertes.fr/tel-00431713/file/These-DELBE_Karl.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Four decades after their introduction, the validity of fault slip inversion methods based on Wallace (1951) and Bott (1959) hypothesis, which states that the slip on each fault surface has the same direction and sense as the maximum resolved shear stress, is still a subject of debate. According to some authors, this hypothesis is questionable since fault mechanical interactions induce slip reorientations as confirmed by geomechanical models. This leads us to ask as to what extent the Wallace-Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. In this paper, we compare two inversion methods; the first is based on the Wallace-Bott hypothesis, and the second relies on geomechanics and mechanical effects on fault heterogeneous slip distribution. In that context, a multi-parametric stress inversion study covering (i) the friction coefficients (μ), (ii) the full range of Andersonian state of stress and (iii) slip data sampling along the faults is performed. For each tested parameter, the results of the mechanical stress inversion and the Wallace-Bott (WB) based stress inversion for slip are compared in order to understand their respective effects. The predicted discrepancy between the solutions of both stress inversion methods (based on WB and mechanics) will then be used to explain the stress inversions results for the chimney Rock case study. It is shown that a high solution discrepancy is not always correlated with the misfit angle (ω ) and can be found under specific configurations (View the MathML sourceR−, θ, μ, geometry) invalidating the WB solutions. We conclude that in most cases the mechanical stress inversion and the WB based stress inversion are both valid and complementary depending on the fault friction. Some exceptions (i.e. low fault friction, simple fault geometry and pure regimes) that may lead to wrong WB based stress inversion solutions are highlighted.
ISSN: 0040-1951

hal-01467165
https://hal.archives-ouvertes.fr/hal-01467165
DOI : 10.1016/j.tecto.2016.11.039

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use 3-D mechanical modeling representing faults as planar surfaces with frictional properties that obey Coulomb-failure process to explore the long-term slip rates of the Altyn Tagh fault and Kunlun faults in the north Tibetan plateau. Crustal theology is simplified as an elastoplastic upper crust and a viscoelastic lower crust. Far-field GPS velocities and late Quaternary fault slip rates are used to constrain the model results. Rheological tests show that effective fault friction lower than 0.1-0.08 leads to high slip rates that fit with geologically and geodetically determined slip rates of the Kunlun fault (10-11.7 +/- 1.5 mm/yr). Meanwhile, the modeled Altyn Tagh fault reaches slip rates similar to 13.7 mm/yr to similar to 7.8 mm/yr in its central portion, between ranges of the geological slip rates. Associated with high slip rates, our model predicts that central Tibet (similar to 84 degrees E-95 degrees E) from the Altyn Tagh fault to the north of the Himalayan arc accommodates north-south shortening and east-west extension rates of similar to 10-12 mm/yr and similar to 8-10 mm/yr, respectively. We also question the widely accepted idea that interseismic strain is driven at the base of the seismogenic zone by a screw dislocation. If this assumption fails, the presented model implies that interseismic strain around large strike-slip faults could be distributed in a much broader way if the lithosphere deforms as a thin elastic plate rather than an elastic half-space with an embedded dislocation. If this distributed deformation is ignored, and the instantaneous surface deformation field modeled as that resulting from slip on a dislocation below a specified depth embedded in an elastic half-space, the estimated slip rate will inevitably be lower than the true long-term slip rate. This appears to explain why geodetic slip rates proposed for the Altyn Tagh fault (510 mm/yr) are lower than some of the geological slip rates. (C) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00411926
https://hal.archives-ouvertes.fr/hal-00411926
DOI : 10.1016/j.epsl.2008.06.049

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf