Éditeur(s) : HAL CCSD Wiley
Résumé : 1. Trade-offs among functional traits reveal major plant strategies that can give insight into species distributions and ecosystem processes. However, current identification of plant strategies lacks the integration of root structural traits together with leaf and stem traits. 2. We examined correlations among 14 traits representing leaf, stem and woody root tissues. Traits were measured on 1084 individuals representing 758 Neotropical tree species, across 13 sites representative of the environmental variation encompassed by three widespread habitats (seasonally flooded, clay terra firme and white-sand forests) at opposite ends of Amazonia (French Guiana and Peru). 3. Woody root traits were closely aligned with stem traits, but not with leaf traits. Altogether leaf, stem and woody root traits delineated two orthogonal axes of functional trade-offs: a first axis defined by leaf traits, corresponding to a leaf economics spectrum, and a second axis defined by covarying stem and woody root traits, corresponding to a wood economics spectrum. These axes remained consistent when accounting for species evolutionary history with phylogenetically independent contrasts. 4. Despite the strong species turnover across sites, the covariation among root and stem structural traits as well as their orthogonality to leaf traits were strongly consistent across habitats and regions. 5. We conclude that root structural traits mirrored stem traits rather than leaf traits in Neotropical trees. Leaf and wood traits define an integrated whole-plant strategy in lowland South American forests that may contribute to a more complete understanding of plant responses to global changes in both correlative and modelling approaches. We suggest further meta-analyses in expanded environmental and geographic zones to determine the generality of this pattern.
ISSN: 0269-8463

hal-01032415
https://hal.archives-ouvertes.fr/hal-01032415
DOI : 10.1111/j.1365-2435.2012.02020.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have studied the phase transformation of forsterite to wadsleyite under shear stress at the Earth's transition zone pressure and temperature conditions. Two-step experiments were performed using a multi-anvil press. First, we hot pressed iron-free forsterite at 6 or 11 GPa and 1100 degrees C. Then we deformed a slab of this starting material using a direct simple shear assembly at 16 GPa and 1400 degrees C for 1, 15, 35, 40, or 60 min. Both the starting material and the deformed samples were characterized using optical and scanning electron microscopy including measurements of crystal preferred orientations (CPO) by electron back scattered diffraction (EBSD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The phase transformation occurs very rapidly, in less than 1 min, and metastable forsterite relics are not observed after deformation. The grain size of wadsleyite is slightly smaller than the forsterite starting material. The water contents obtained from FTIR analyses in forsterite and wadsleyite are 65-124 wt ppm H2O and 114-736 wt ppm H2O, respectively, which are well below water solubility at similar conditions in the presence of free water. Wadsleyite aggregates display weak CPO patterns with [1 0 0] axes concentrated at low angle to the shear direction, [0 1 0] axes perpendicular to the shear plane and nearly random [0 0 1] axes. Only a few dislocations were observed in wadsleyite with TEM. This observation is consistent with the assumption that most dislocations formed during the initial high-stress stages of these stress-relaxation experiments, were consumed in the phase transformation, probably enhancing the transformation rate. CPO patterns vary as a function of the water content: with increasing water content the density of [1 0 0] axes parallel to the shear direction decreases, and the density of [0 0 1] axes increases. Viscoplastic self-consistent modeling of CPO evolution using previously reported glide systems for wadsleyite, i.e., [1 0 0]{0 k 1} and 1/2 (1 1 1){1 0 1}, cannot reproduce the measured CPO, unless the [0 0 1](0 1 0) system, for which dislocations have not been observed by TEM, is also activated. In addition, wadsleyite grain growth suggests the participation of diffusion-assisted processes in deformation. Calculated anisotropies for P and S-waves using measured CPO are always below 1%. This very low anisotropy is due to both the low finite strain achieved in the experiments, which leads to weak wadsleyite CPO, and to the diluting effect of added majorite. The present experiments emphasize the importance of stress, grain size evolution and water content in the forsterite to wadsleyite phase transformation and subsequent deformation in the transition zone.
ISSN: 0031-9201

hal-00617430
https://hal.archives-ouvertes.fr/hal-00617430
DOI : 10.1016/j.pepi.2010.11.001

Éditeur(s) : Université de Pau et des Pays de l'Adour
Résumé : In a context of decline of European eel (Anguilla anguilla L.) and search for biological markers of habitat use and quality, a multidisciplinary approach was engaged on the Adour estuary and its associated wetlands. Two axes were developed. The first axe aimed at highlighting the successive presence of the species in different ecosystems based on the otolith elemental composition. The second aimed at the evaluation of the chemical pressure underwent by eels based on the contaminant bioconcentration in soft tissues and the early molecular response to the chemical stress. With a view to the analyses of otolith elemental composition taking into account the 3D structure, the low elemental concentration in the matrix and keeping the finest spatial resolution, four micro sampling strategies and multi elemental analyses using femtosecond laser ablation ICP-MS were tested (crater, 1D scan, 2D scan, flash ablation). The strategy showing the best compromise according to the objectives (continuous recording, multi elemental approach) was applied on otolith of yellow eels from the Adour. The simultaneous use of Sr and Ba profiles, after validation, represents a new tool, easy, fast and reliable for the reconstruction of freshwater and brackish ecosystems use by eel avoiding misinterpretation due to vaterite inclusions. Three major behaviors were highlighted on the Adour: a residency in brackish water, a residency in freshwater and nomad behavior. The last one is illustrated by a shift to brackish water after three to four years spent in freshwater. Simultaneously, the study of inorganic and organic contamination of eel soft tissues showed that sampled wetlands are moderately contaminated. These results were confirmed by the first estimation, in wild conditions, of the early response to the chemical stress using the hepatic expression of CYP1A1 gene measured by real time RT-PCR. Conversely, in the downstream part of the Adour estuary, Hg loads in eels, especially methyl mercury, and PCBs analyses indicate values that need further investigations considering the European norms of consumption. The comparison of the different markers used (heavy metal and organochlorinated compounds contamination of soft tissues, condition index) support a lower quality of the estuary despite higher eel growth rate on this site. This study supports the use of numerous markers in integrated studies in order to understand and specify the relationships between eels and their continental growth zones.
Dans un contexte de déclin de l'anguille européenne (Anguilla anguilla L.) et de recherche de marqueurs biologiques retraçant la fréquentation des divers habitats et renseignant sur la qualité de ceux-ci, une approche pluridisciplinaire a été mise en place sur l'estuaire de l'Adour et ses zones humides. Deux axes ont été privilégiés. Le premier cherchait à visualiser la présence successive de l'espèce dans différents écosystèmes en se basant sur la composition élémentaire des otolithes. Le deuxième avait pour but d'évaluer la pression chimique inorganique et organique subie par l'anguille dans les zones d'études en s'appuyant sur la bioconcentration des contaminants dans les tissus mous et la réponse moléculaire précoce au stress chimique. En vue des analyses de la composition élémentaire des otolithes et pour répondre au mieux à la structure en trois dimensions, à la faible concentration des éléments dans la matrice tout en conservant une résolution spatiale la plus fine possible, quatre stratégies de micro-échantillonnage et d'analyses multiélémentaires par ablation laser femtoseconde ICP-MS ont été testées (cratère, scan 1D, scan 2D, ablation flash). La méthodologie présentant le meilleur compromis par rapport aux objectifs fixés (enregistrement continu, approche multiélémentaire) a ensuite été appliquée sur les otolithes d'anguilles jaunes du Bas-Adour. L'utilisation simultanée des profils continus de Sr et de Ba, après validation, constitue un outil facile d'utilisation, rapide et fiable pour reconstruire les historiques de fréquentation des différents écosystèmes estuariens et dulçaquicoles par l'anguille tout en s'affranchissant des problèmes potentiels liés aux inclusions de vatérite, un polymorphe du carbonate de calcium. Trois grands types de comportement ont pu être mis en évidence sur l'Adour : résidence en eau saumâtre, résidence en eau douce et nomadisme. Ce dernier est plus particulièrement illustré par un mouvement marqué vers l'eau saumâtre pour des individus ayant passé de trois à quatre ans dans l'eau douce. Parallèlement, l'étude de la contamination organique et inorganique des tissus mous de l'anguille a permis de déduire à la faible contamination des zones humides échantillonnées. La première estimation en condition naturelle de la réponse précoce au stress chimique par évaluation de l'expression hépatique du gène CYP1A1 par RT-PCR en temps réel confirme ces résultats. En revanche, dans la partie estuarienne aval de l'Adour, les niveaux en Hg, présent en majorité sous sa forme méthylée dans les anguilles, et l'analyse des PCBs indiquent des valeurs qui suscitent un examen plus approfondi au regard des normes européennes en vigueur. La confrontation des différents descripteurs (contamination des tissus mous par les métaux lourds et organochlorés, indice de condition) utilisés conforte la qualité moindre de la zone estuarienne malgré des performances de croissance de l'anguille favorisées sur ces sites. Ainsi, cette étude supporte l'intérêt de la mise en oeuvre de descripteurs multiples utilisés (niveaux de métaux lourds et organochlorés dans les tissus mous, réponse moléculaire au stress chimique, microchimie de l'otolithe, indice de condition, taux de croissance) dans des approches intégrées pour comprendre et préciser les relations existantes entre l'anguille et ses zones de croissance continentales.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2009/these-7381.pdf
http://archimer.ifremer.fr/doc/00000/7381/

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995–1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N–S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the ‘r’ factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.
ISSN: 0956-540X

hal-01171752
https://hal.archives-ouvertes.fr/hal-01171752
DOI : 10.1093/gji/ggv052

Éditeur(s) : HAL CCSD
Résumé : National audience
Les semelles métamorphiques sont situées à la base desgrandes ophiolites obductées. Elles sont principalement composéesd’amphibolites (métabasaltes à amphiboles ± grenat,clinopyroxène, plagioclase) fortement cisaillées et dont les conditionsmaximum de métamorphisme sont estimées à 800±100Cet 1.0±0.2 GPa. Leur formation a lieu au cours des 2 Ma suivantl’initiation des zones de subduction. Ces amphibolites sont interprétéescomme des portions de lithosphère océanique subduite,portions qui sont métamorphisées, dis-je, à haute températurepar transfert de chaleur depuis le coin de manteau sus-jacent quiformera la base de l’ophiolite obductée. Leur importante déformationau pic de métamorphisme est interprétée comme synchroneà leur accrétion au manteau de la plaque supérieure. Les semellesmétamorphiques sont donc des témoins directs de la dynamiqueprécoce des zones de subduction océanique. Leur pétrologie etleur déformation fournissent des contraintes majeures, et rares,sur l’évolution de la structure thermique et sur le comportementmécanique de l‘interface de subduction naissante. Cette étudeprésente des données structurales à plusieurs échelles, couplant desanalyses de terrain aux analyses EBSD sur des échantillons à amphibole± plagioclase ± clinopyroxene ± grenat de la semelle métamorphique.Les grains d’amphibole et de plagioclase sont caractériséspar une forte orientation préférentielle parallèle à la foliationet à la linéation. Cette fabrique est accompagnée par une forteorientation cristallographique préférentielle des amphiboles marquéepar un axe [001] marquant la linéation et la normale au plan(001) perpendiculaire à la foliation. Les plagioclases montrentune orientation cristallographique préférentielle faible voire nulle.Cette fabrique est similaire à celle observée dans les amphibolitescisaillées de base de croûte continentale. Les clinopyroxèneset les grenats présentent des degrés d’orientation intermédiaires.Ces deux phases forment des boudins dont l’axe long est orientéparallèlement à la foliation. Les porphyroclastes de clinopyroxèneprésentent une extinction ondulante et le développement de sousgrainsà leur périphérie. Les clinopyroxènes et les grenats agissentdonc comme phases ” dures ”, augmentant la résistance de laroche à la déformation. À l’initiation de la subduction, la partiesupérieure de la plaque plongeante est affectée par l’augmentationprogressive du degré de métamorphisme. Ceci entraîne une fortedéshydratation et la cristallisation de phases ” faibles ” (quartz,amphibole, plagioclase) et ” fortes ” (clinopyroxene, grenat). Larhéologie de l’interface de la subduction en est fortement affectée.Les unités de la semelle métamorphique (avec des minéralogies etdes conditions P-T-t différentes) accrétées aux péridotites de laplaque supérieure témoignent de changements rhéologiques majeuresà l’interface de la subduction au cours de l’histoire précocedes zones de subduction.
RST 2016, livre des résumés
Caen, France

insu-01388730
https://hal-insu.archives-ouvertes.fr/insu-01388730

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Las Islas Canarias, situadas en la región macaronésica, acogen ecosistemas terrestres y marinos de valiosa riqueza ecológica y paisajística, representativos de las áreas culturales y biogeográficas de su entorno; hasta el punto de albergar tres Reservas de la Biosfera reconocidas por la UNESCO. La diversidad y riqueza de este marco insular ya fue elogiada por grandes científicos como Alexander von Humboldt o Charles Darwin. Sin embargo, actualmente la presión ejercida sobre el medio por parte del desarrollo urbanístico y la industria turística, motor económico del archipiélago, pone en peligro estos frágiles ecosistemas; lo que ha generado un profundo debate entre crecimiento económico y turístico, y desarrollo sostenible y conservación. El presente artículo trata, desde una óptica divulgativa, de acercar al lector al medio que caracteriza las Islas Canarias e introducirlo en el marco donde se desarrolla parte importante de la actividad turística en España, uno de los países que más turistas recibe año a año.
Les îles Canaries, situées dans la région de la ‘Macaronésica’ (l’Est de l’Océan Atlantique), abritent des écosystèmes marins et terrestres très précieux, tant du point de vue écologique que paysager. Ils sont représentatifs de les zones biogéographiques de sa région et comptent trois Réserves da Biosphère reconnues par l’UNESCO. De grands scientifiques comme Alexander Von Humboldt et Charles Darwin ont fait l’éloge de la richesse de la biodiversité de cet archipel. Cependant, actuellement, la pression anthropique, notamment en liaison avec le développement touristique et tous les enjeux économiques qui l’accompagnent, mettent en danger les écosystèmes des Canaries ; ce constat a ouvert un large débat sur les enjeux autour des développements économique et touristiques et leurs dérives. Notre article propose de mettre l’accent sur les caractéristiques des îles Canaries et de replacer les processus de développements touristiques dans leur contexte pour ouvrir la réflexion sur les conditions nécessaires pour d’un développement durable.
The Canary Islands, located in the region of 'Macaronésica' (Este of Atlantic Ocean), are home to marine and terrestrial ecosystems very valuable, both ecological and landscape. They are representative of the bio-geographic zones of the region and there are three Biosphere Reserves da recognized by UNESCO. Great scientists such as Alexander Von Humboldt and Charles Darwin have praised the richness of the biodiversity of this archipelago. However, at present, anthropogenic pressure, including in relation to tourism development and all economic issues that accompany it, endanger ecosystems Canary Islands. This has opened a broad debate on the issues surrounding economic development and tourism and their excesses. Our article proposes to focus on the characteristics of the Canary Islands and put the process of tourist developments in their context to open reflection on the necessary conditions for sustainable development.
Canaries

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.1302
http://journals.openedition.org/etudescaribeennes/1302

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Vertical displacements on the SW-NE T (e) over capt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Caranca and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. Ar-40/Ar-39 data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Caranca gneiss massif records systematically younger Ar-40/Ar-39 ages. These younger Ar-40/Ar-39 ages in the Canigou-Caranca gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Caranca suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the T (e) over capt fault are recorded by "low" temperature thermochronology using K-feldspar Ar-40/Ar-39, zircon and apatite fission track and (U-Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55-60 Ma to Late Eocene at a mean rate of 15-20 degrees C/Ma in the final stage. This cooling stage corresponds to T (e) over capt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Caranca massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30 degrees C/Ma during Early Oligocene followed by a more moderate rate of 3 degrees C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the T (e) over capt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.
ISSN: 1437-3254

hal-00411442
https://hal.archives-ouvertes.fr/hal-00411442
DOI : 10.1007/s00531-007-0179-x

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The ENE-WSW Autun Shear Zone in the northeastern part of the French Massif Central has been interpreted previously as a dextral wrench fault. New field observations and microstructural analyses document a NE-SW stretching lineation that indicates normal dextral motions along this shear zone. Further east, similar structures are observed along the La Serre Shear Zone. In both areas, a strain gradient from leucogranites with a weak preferred orientation to highly sheared mylonites supports a continuous Autun-La Serre fault system. Microstructural observations, and shape and lattice-preferred orientation document high-temperature deformation and magmatic fabrics in the Autun and La Serre granites, whereas low- to intermediate-temperature fabrics characterize the mylonitic granite. Electron microprobe monazite geochronology of the Autun and La Serre granites yields a ca. 320 Ma age for pluton emplacement, while mica 40Ar-39Ar datings of the Autun granite yield plateau ages from 305 to 300 Ma. The ca. 300 Ma 40Ar-39Ar ages, obtained on micas from Autun and La Serre mylonites, indicate the time of the mylonitization. The ca. 15-Ma time gap between pluton emplacement and deformation along the Autun-La Serre fault system argue against a synkinematic pluton emplacement during late orogenic to postorogenic extension of the Variscan Belt. A ductile to brittle continuum of deformation is observed along the shear zone, with Lower Permian brittle faults controlling the development of sedimentary basins. These results suggest a two-stage Late Carboniferous extension in the northeastern French Massif Central, with regional crustal melting and emplacement of the Autun and La Serre leucogranites around 320 Ma, followed, at 305-295 Ma, by ductile shearing, normal brittle faulting, and subsequent exhumation along the Autun-La Serre transtensional fault system.
ISSN: 1437-3254

insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918/document
https://hal-insu.archives-ouvertes.fr/insu-00596918/file/Article_Morvan_v_INIST.pdf
DOI : 10.1007/s00531-011-0673-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Although magmatism may occur during the earliest stages of continental rifting, its role in strain accommodation remains weakly constrained by largely 2-D studies. We analyze seismicity data from a 13 month, 39-station broadband seismic array to determine the role of magma intrusion on state-of-stress and strain localization, and their along-strike variations. Precise earthquake locations using cluster analyses and a new 3-D velocity model reveal lower crustal earthquakes beneath the central basins and along projections of steep border faults that degas CO2. Seismicity forms several disks interpreted as sills at 6-10 km below a monogenetic cone field. The sills overlie a lower crustal magma chamber that may feed eruptions at Oldoinyo Lengai volcano. After determining a new ML scaling relation, we determine a b-value of 0.87±0.03. Focal mechanisms for 65 earthquakes, and 13 from a catalogue prior to our array reveal an along-axis stress rotation of ∼60° in the magmatically active zone. New and prior mechanisms show predominantly normal slip along steep nodal planes, with extension directions ∼N90°E north and south of an active volcanic chain consistent with geodetic data, and ∼N150°E in the volcanic chain. The stress rotation facilitates strain transfer from border fault systems, the locus of early-stage deformation, to the zone of magma intrusion in the central rift. Our seismic, structural, and geochemistry results indicate that frequent lower crustal earthquakes are promoted by elevated pore pressures from volatile degassing along border faults, and hydraulic fracture around the margins of magma bodies. Results indicate that earthquakes are largely driven by stress state around inflating magma bodies.
ISSN: 1525-2027

hal-01667198
https://hal.archives-ouvertes.fr/hal-01667198
DOI : 10.1002/2017GC007027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : In this work we combined apatite fission track and biotite/K-feldspar 40Ar/39Ar ages with tectonic data in the west central part of the Axial Zone of the Pyrenees. We discuss the exhumation ages and rates of the Néouvielle, Bordère-Louron, and Bielsa Variscan granites and their relationships with the timing and sequence of south vergent basement thrusting within the Pyrenean orogenic prism. The 40Ar/39Ar ages on K-feldspars from the Néouvielle massif (sample NV7) seem to indicate tectonic movements on the Eaux-Chaudes thrust during the early middle Eocene. Fission track results suggest that the exhumation of the Néouvielle massif occurred around 35 Ma and exhumation of the Bordère-Louron massif around 32 Ma in relation to thrusting on the Gavarnie thrust. The Bielsa massif was exhumed from around 19 Ma by out-of-sequence movements on the Bielsa thrust. We thus show that whereas most of the Pyrenean basement thrust faults (here the Eaux-Chaudes, Gavarnie, and Guarga thrusts) were active in sequence toward the southern foreland from the early Eocene to the earliest Miocene, some of them (here the Bielsa thrust) were activated out of sequence in the hinterland, later than the generally accepted Aquitanian age for the end of the Pyrenean compression. Finally, the apatite fission track modeling indicate a last cooling episode starting around 5 Ma which is most certainly related to the Pliocene reexcavation of the southern and northern flanks of the Pyrenees
ISSN: 0278-7407

hal-00406582
https://hal.archives-ouvertes.fr/hal-00406582
DOI : 10.1029/2006TC002080

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : The tropical coast of Queensland, Australia is experiencing rapid population and tourism growth. Heavy development pressure is being placed on the biophysical environment, which includes the largest sand island in the world (World Heritage listed), Fraser Island. Despite the existence of State planning legislation oriented towards environmental sustainability, it is apparent that little, if any, regard is being paid to the long-term effects of resort and canal-estate development on the underlying biophysical environment of the coast and islands. While the remarkable surface features of the tropical coastal environment such as the surf beaches, the unique dune lakes, and the coastal vegetation, as well as the prolific wildlife, are used as selling points for new settlement and above all tourism, little is known or apparently of major concern with respect to the long term environmental impact of coastal development. While the crowding effect of large numbers of visitors and their impact on the natural environment - through significant degradation, site hardening or lack of proper on-site management – has been identified as a particular problem in certain areas, there is little knowledge of impacts on the underlying coastal geomorphology. In particular, developmental choices are often made in ignorance of, or disregard of, the widespread existence of tropical acid sulfate soils in that coastal environment. Reactive soils such as these can, and do, greatly affect the biophysical outcomes of a development if they are exposed. This paper documents such impacts in the form of a case study of the acid sulfate soil problem in relation to the development of tourist resorts, and suggests that part of the solution is for the State Government to insist on enforceable standards relating to their development for tourism in the coastal zone. These would reduce the use by many resort owners of fancy golf course developments as an environmental cover up to make it look as if they put a lot of effort into protecting the environment….
La côte tropicale du Queensland est confrontée à un accroissement rapide de la population. Les fortes pressions anthropiques pèsent sur le milieu biophysique, qui comprend notamment a plus grande île de sable du monde, un site classé Patrimoine de l’Humanité, Port Hinchinbrook et Fraser Island. Malgré l’existence d’une législation nationale orientée vers la préservation de l’environnement, il est manifeste que peu d’attention est accordée aux effets à long terme des sites touristiques et du développement de l’urbanisation sur ces franges côtières sensibles. L’aspect massif des flux de visiteurs et leurs impacts sur le milieu naturel a été identifié comme un sujet d’inquiétude particulier dans certaines régions. La connaissance des impacts sur la géomorphologie côtière souterraine est très réduite et les choix de développement sont souvent faits dans l’ignorance ou au mépris de la présence répandue de terrains de sulfate d’acide dans ce milieu côtier. Des sols réactifs comme ceux-là peuvent affecter, et affectent, grandement les résultats géophysiques d’un développement lorsqu’ils sont connus. Des études de cas sur le problème des sols de sulfate d’acide suggèrent qu’une partie de la solution pour le gouvernement de l’Etat du Queensland est d’imposer des normes obligatoires pour le développement du tourisme dans la zone côtière.
Australie
Queensland

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.1272
http://journals.openedition.org/etudescaribeennes/1272

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Oman ophiolite, the horizon where the melt lens pinched during drifting away from the ocean ridge axis has been identified. Starting in the Root Zone of the Sheeted Dike Complex (RZSDC) located above this horizon, 18 Sections down to the upper gabbros unit have been mapped in great detail, in selected areas of the southern massifs of this ophiolite. They are complemented by 133 sites, located throughout the entire ophiolite, where the transition from the RZSDC to the uppermost foliated gabbros is well exposed. Altogether, half the sites and 11 cross sections display, within a few tens of meters beneath the RZSDC, a magmatic foliation which is parallel to the overlying sheeted dikes. In the other sites and cross sections, the gabbro foliation is either flat-lying or steep but not parallel to the sheeted dikes. Compared to the RZSDC isotropic ophitic gabbros where clinopyroxene is interstitial between plagioclase laths, in the topmost steeply foliated gabbros, clinopyroxene is idiomorphic, becoming rapidly granular and tabular down section by recrystallization and peripheral alteration to hornblende. Moving down from these uppermost gabbros and over one hundred meters, the steep foliation becomes stronger and the poorly recovered top gabbros grade into the recrystallized, granular gabbros of the gabbro unit. These repeated observations indicate to ascribe these gabbros to subsidence of a compacting mush from the floor of the melt lens into the underlying, main magma chamber. The topmost gabbros beneath RZSDC, which were expelled from the melt lens by drifting very soon after settling on the melt lens floor, display in plagioclase a spectacular zoning pointing to a fast cooling. Moving downwards, stronger foliation, increased compaction and recovery-recrystallization are explained by the time spent by the subsiding mush inside the magma chamber increasing by one order of magnitude (similar to 50 to 500 yr) over this vertical distance. This field-based study brings compelling field evidence supporting the former models of subsidence which were based on the assumption that the mush that settled onto the floor of the melt lens is sucked downwards during drifting of the crust away from the ridge axis.
ISSN: 0012-821X

hal-00420903
https://hal.archives-ouvertes.fr/hal-00420903
DOI : 10.1016/j.epsl.2009.04.012

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
A comprehensive model for the activity of the elementary accretion segment at fast-spreading ridges relies on integration of structural data from the Oman ophiolite and geophysical results from the East Pacific Rise (EPR) around 9°N, which are of comparable size and spreading rates. The axial melt lens at shallow crustal level provides a link between Deval segmentation at the seafloor and a lower melt sill at Moho level, imaged at the EPR as a crustal melt zone (CMZ) and mapped in Oman as the Moho transition zone (MTZ). Both are attached to a mantle upwelling at the EPR, and to a frozen diapir in Oman. The physical link between diapiric mantle uprising at the Moho and Devals segmentation at the seafloor is the melt being injected from the mantle into the lower MTZ, ponding there, and then being released by powerful injections into the upper melt lens. The magma chamber covers the diapir at a distance of 5 km from the ridge axis.
ISSN: 0954-4879

hal-01171958
https://hal.archives-ouvertes.fr/hal-01171958
DOI : 10.1111/ter.12137

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
We present new apatite (U–Th)/He (AHe), apatite fission track (AFT) and zircon (U–Th)/He (ZHe) data to unravel the timing of exhumation and thrusting in the western Axial Zone of the Pyrenees and the adjacent North Pyrenean Zone (Chaînons Béarnais). In the north, ZHe data yield cooling signals between 26 and 50 Ma in the Chaînons Béarnais, which are consistent with the onset of thrust-related cooling in the neighboring Mauléon Basin modeled by previous authors. Non-reset Triassic ages are found in the footwall of the North Pyrenean Frontal thrust (Aquitaine Basin). To the south, similar ZHe ages in both the hanging wall and footwall of the Lakora thrust record Late Eocene to Oligocene cooling that we attribute to the activity of the Gavarnie thrust. Thermal modeling of samples from the Lakora thrust hanging wall indicates cooling from Early Eocene times, recording activity of the Lakora thrust. Paleozoic detrital samples from the westernmost Axial Zone and from the Eaux-Chaudes and Balaitous–Panticosa granitic plutons yield AFT signals between 20 and 30 Ma and ZHe between 20 and 25 Ma. Modelling indicates fast cooling during this time, which we attribute to the motion of the Guarga thrust. AHe data from these Axial Zone plutons, combined with modelling, show a post-tectonic signal (8–9 Ma), which indicates renewed erosion after a period without major cooling and exhumation between 20 to 10 Ma.
ISSN: 1631-0713

insu-01301995
https://hal-insu.archives-ouvertes.fr/insu-01301995
DOI : 10.1016/j.crte.2016.01.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.
ISSN: 0191-8141

hal-01355954
https://hal.archives-ouvertes.fr/hal-01355954
DOI : 10.1016/j.jsg.2016.02.015

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002