Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Dental and postcranial remains (an atlas, carpus and metacarpus elements, and a part of the pelvic girdle) of an embrithopod mammal are described from Bir Om Ali, Tunisia, a new late Eocene locality. The enamel microstructure of a tooth fragment found in association shows 'arsinoitheriid radial enamel', an enamel condition which is characteristic of Arsinoitherium (Arsinoitheriidae, Embrithopoda). Although the postcranial elements slightly differ in size and morphology from those of Arsinoitherium zitteli (late Eocene to early Oligocene), we tentatively refer this new Eocene Tunisian material to that genus. These fossils represent the first known embrithopod from the Eocene of Tunisia.
ISSN: 0899-5362

hal-00903435
https://hal.archives-ouvertes.fr/hal-00903435
DOI : 10.1016/j.jafrearsci.2013.07.010

Éditeur(s) : HAL CCSD
Résumé :  
The main aspects of wood mechanics are approached through the role played by wood as the building material of the tree. The main concepts used by nature: progressive setting up of tree weight and architecture, multifunctional role of wood and adaptability to hazard and long-term evolution, are clarified together with their consequence on the multilayered, anisotropic nature of wood. The technological choices of the plant world as the cellular structure, the use of composite with oriented fibres and hydro-carbonated polymers, as well as the systematic prestressing of every new layer, bear obvious consequences on the type of mechanical behaviour of wood. The local control of the level of prestressing through minor modifications of the cell-wall biosynthesis allows the tree to adapt to conditions of light exploration that will evolve according to time and risk occurrence. This analysis of wood genesis process permits in return to improve our understanding of the mechanical behaviour of the material in relation with the parameters of the microstructure.
Comptes Rendus de l'Académie des Sciences Série 2

hal-01032151
https://hal.archives-ouvertes.fr/hal-01032151
DOI : 10.1016/S1620-7742(01)01380-0

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We make this reply to Philippe Oliver's comments on the deformation of the Mesozoic cover of the northern Agly massif.
ISSN: 0278-7407

hal-00903419
https://hal.archives-ouvertes.fr/hal-00903419
https://hal.archives-ouvertes.fr/hal-00903419/document
https://hal.archives-ouvertes.fr/hal-00903419/file/Vauchez_et_al-2013-Tectonics.pdf
DOI : 10.1002/tect.20061

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Type I and Type II eclogite xenoliths from the Roberts Victor kimberlite (South Africa) show marked differences in terms of microstructures, mineralogy, major-and trace-element compositions and oxygen-isotope compositions. The unequilibrated microstructures of Type I eclogites, their typical accessory assemblages (phologopite, diamond, sulphides, fluid inclusions) and the ubiquitous presence of "melt pockets" in garnets provide strong evidence of metasomatism. Type II eclogites systematically lack such features and are microstructurally more equilibrated. Type I eclogites are more magnesium-rich than most Type II (mean Mg# = 0.56 vs. 0.46), while Type II eclogites are generally more Ca-rich (mean CaO = 9 vs. 12 wt%) and Fe-rich (mean FeO = 10 vs. 12 wt%). Type I eclogites are systematically enriched in LREE, Sr, Ba, alkali elements, HFSE, Th and U compared to the more depleted Type II eclogites. Calculated trace-element patterns of fluids in equilibrium with Type I eclogites are closely similar to those of volatile-rich small-volume mantle melts in the carbonatite-kimberlite spectrum commonly inferred to be responsible for mantle metasomatism. Although oxygen isotopes are often used to argue for a subduction origin of mantle eclogites, correlations between delta O-18 of garnet and typical metasomatic tracers suggest that the metasomatic process also has shifted the oxygen-isotope compositions of the Type I eclogites toward heavier values. Roberts Victor Type I eclogites thus carry the imprint of a metasomatic process that strongly modified their major-element, trace-element and isotopic compositions, while the more pristine Type II eclogites escaped this modification. Therefore, attempts to constrain the origin of Roberts Victor eclogites should not be based on the much more abundant Type I eclogites, which retain little geochemical memory of their protoliths. The most suitable materials for such investigations may be the less metasomatised, but more rare, Type II eclogites.
ISSN: 0016-7037

hal-00669867
https://hal.archives-ouvertes.fr/hal-00669867
DOI : 10.1016/j.gca.2011.08.035

Éditeur(s) : EDP Sciences
Résumé : Daily growth increments measured in the otolith of Thunnus atlanticus were used to estimate the age and growth of individuals. which were sampled from an artisanal fishery operating around fish aggregating devices (FADs) moored off Martinique Island. In this study, 76 otoliths were analysed for fish ranging from 20 to 68 cm fork lengths (FL). The fish were caught using trolling lines at depths ranging from 0 to 10 m. Counts were made, under a light microscope, on the external part of the transverse section of the sagittae, from the primordium to the ventral edge. The mean coefficient of variation of the age reading was 2.4%. To validate readings, the number of increments for 11 individuals was counted using both optic and scanning electron microscopes. The calculated relationship between readings of both methods was found to be linear, with a slope of 1.03 and R-2 = 0.99. Frequency of growth increment formation could not be validated. Growth rates derived from otolith readings were, however, compared to those obtained using a modal progression analysis, which was performed on the length-frequency distributions of the landings over a period of two months. The corroboration between the growth rates was good. One increment was assumed to represent one day. The parameters of the von Bertalanffy growth curve for both sexes were L-infinity = 71.4 cm FL, k = 0.002 day(-1) and tau(0) = -80 days. According to our results, there is no evidence that Martinican moored FADs act as ecological traps for blackfin tuna. Instead, young blackfin tuna probably leave the vicinity of Martinican moored FADs to undergo a trophic migration at 7 to 8 month-old, and then come back about 8 months later to breed in the Lesser Antilles area.
Les microstructures présentes dans les otolithes de Thunnus atlanticus ont été utilisées pour estimer l'âge et la croissance des thons capturés par la pêcherie artisanale exploitant les dispositifs de concentrations de poissons (DCP) mouillés autour de la Martinique. Des thons de 20 à 68 cm de longueur à la fourche (LF) ont été capturés à la ligne de traîne de surface entre 0 et 10 m de profondeur. Les stries d'accroissement ont été comptées sur 76 otolithes en microscopie optique sur la partie externe des coupes transversales de la sagitta, du nucléus jusqu'à l'extrémité verticale de la coupe (coefficient de variations 2,4 %). Afin de vérifier qu'il n'y avait pas de sous-estimation du nombre de stries, nous avons effectué un comptage, en microscopie électronique à balayage, pour 11 individus. La relation établie entre ces deux méthodes de comptage est linéaire avec un pente égale à 1,03 et R2 = 0,99. La vitesse de croissance issue de l'analyse des otolithes a été comparée à celle estimée à partir de l'analyse en progression modale des distributions en fréquence de taille des débarquements sur une période de 2 mois. La corroboration entre les deux méthodes était bonne. Nous avons supposé que la formation des stries de croissance suivait un rythme journalier. Les paramètres de l'équation de croissance de von Bertalanffy pour les 2 sexes confondus sont: L-infinity = 71.4 cm FL, k = 0.002 day(-1) and tau(0) = -80 days. Les résultats de cette étude n'indiquent pas que les DCP ancrés martiniquais puissent agir comme des pièges écologiques pour les thons noirs. Les jeunes thons noirs semblent au contraire quitter la proximité des DCP et entreprendre une migration trophique lorsqu'ils atteignent 7 à 8 mois. Ils ne reviendraient ensuite dans la zone des Petites Antilles qu'environ 8 mois plus tard, manifestement pour se reproduire.
Aquatic Living Resources (0990-7440) (EDP Sciences), 2004 , Vol. 17 , N. 1 , P. 13-18

Droits : EDP Sciences, IFREMER, IRD 2004
http://archimer.ifremer.fr/doc/2004/publication-396.pdf
DOI:10.1051/alr:2004009
http://archimer.ifremer.fr/doc/00000/396/

Éditeur(s) : HAL CCSD Frontiers Media
Résumé : International audience
We present high resolution observations of microstructure and texture evolution during dynamic recrystallization (DRX) of ice polycrystals deformed in the laboratory at high temperature (≈0.98Tm). Ice possesses a significant viscoplastic anisotropy that induces strong strain heterogeneities, which result in an early occurrence of DRX mechanisms. It is therefore a model material to explore these mechanisms. High resolution c-axis measurements at sample scale by optical techniques and full crystallographic orientation measurements by cryo-Electron Back Scattering Diffraction (EBSD) provide a solid database for analyzing the relative impact of the macroscopic imposed stress vs. the local and internal stress fields on DRX mechanisms. Analysis of misorientation gradients in the EBSD data highlights a heterogeneous dislocation distribution, which is quantified by the Nye tensor estimation. Joint analyses of the dislocation density maps and microstructural observations highlight spatial correlation between high dislocation density sites and the onset of nucleation taking place by grain-boundary bulging, subgrain rotation or by the formation of kink-bands.
ISSN: 2296-6463

hal-01515284
https://hal.univ-lorraine.fr/hal-01515284
DOI : 10.3389/feart.2015.00081

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We studied the deformation in a partially molten mantle through detailed petrostructural analysis of plagioclase lherzolites from the northwestern part of the central Lanzo massif. These peridotites display a pervasive anastomosed network of millimetre to centimetre-scale plagioclase-rich bands, which grades locally into a planar layering marked by an intercalation of plagioclase-rich and olivine-rich layers up to tens of centimetres wide. Both the anastomosed and the planar layering are subparallel to the deformation fabric, characterized by a foliation defined by the shape-preferred orientation of olivine and by crystal preferred orientation (CPO) of olivine, orthopyroxene, and clinopyroxene. This parallelism, the coexistence of microstructural evidence for melt-rock reactions and for deformation by dislocation creep, and the predominance of axial-[010] olivine CPO patterns, characterized by [010] axes clustered normal to the layering, indicate that deformation and the reactive melt percolation that formed the layering were coeval. Strong heterogeneity in mineral composition in the planar layering domains, with Fe-enrichment in olivine and spinel and highly variable Ti content in spinel in cm-scale plagioclase-rich bands, implies that the latter interacted with higher melt volumes. High Ti contents in pyroxenes and spinel in the anastomosed layering domains point to changes in melt composition, hinting to less effective melt transport. We propose therefore that the planar layering records melt segregation in layers parallel to the shear plane, whereas the anastomosed layering results from melt alignment along grain boundaries subparallel to the shear plane, without segregation. Finite strain in the different layers cannot be quantified, but comparison of the present observations with data from experiments and from other mantle outcrops displaying shear-controlled melt organization suggests that the transition from the anastomosed to the planar layering might record an increase in finite strain, that is, strain localization associated with variations in the instantaneous melt fraction.
ISSN: 0040-1951

hal-01053509
https://hal.archives-ouvertes.fr/hal-01053509
DOI : 10.1016/j.tecto.2014.01.007

Éditeur(s) : HAL CCSD Techno-Press
Résumé : Fractures and faults riddle the Earth’s crust on all scales, and the deformation associated with them is presumed to have had significant effects on its petrological and structural evolution. However, despite the abundance of directly observable earthquake activity, unequivocal evidence for seismic slip rates along ancient faults is rare and usually related to frictional melting and the formation of pseudotachylites. We report novel microstructures from garnet crystals in the immediate vicinity of seismic slip planes that transected lower crustal granulites during intermediate-depth earthquakes in the Bergen Arcs area, western Norway, some 420 million years ago. Seismic loading caused massive dislocation formations and fragmentation of wall rock garnets. Microfracturing and the injection of sulfide melts occurred during an early stage of loading. Subsequent dilation caused pervasive transport of fluids into the garnets along a network of microfractures, dislocations, and subgrain and grain boundaries, leading to the growth of abundant mineral inclusions inside the fragmented garnets. Recrystallization by grain boundary migration closed most of the pores and fractures generated by the seismic event. This wall rock alteration represents the initial stages of an earthquake-triggered metamorphic transformation process that ultimately led to reworking of the lower crust on a regional scale.
ISSN: 2287-528X

hal-01553309
https://hal.archives-ouvertes.fr/hal-01553309
https://hal.archives-ouvertes.fr/hal-01553309/document
https://hal.archives-ouvertes.fr/hal-01553309/file/austrheim2017.pdf
DOI : 10.1126/sciadv.1602067

Éditeur(s) : HAL CCSD Karger
Résumé : International audience
BACKGROUND: Polycyclic aromatic hydrocarbons (PAHs), such as benzo[a]pyrene (B[a]P), are ubiquitous toxic environmental pollutants capable of inducing cell death. Intracellular pH plays a key role in the regulation of cell survival and death. Our previous works have demonstrated that intracellular alkalinization mediated by Na(+)/H(+) exchanger 1 (NHE-1) is a critical event involved in B[a]P-induced apoptosis. The aim of this study was to further elucidate the mechanisms of NHE-1 activation upon B[a]P exposure. METHODS: We tested the effects of plasma membrane cholesterol enrichment or depletion on B[a]P-induced NHE-1 activation related to apoptosis. We isolated cholesterol-rich plasma membrane microdomains to assess NHE-1 submembrane location and immunoprecipitated NHE-1 from the different sub-membrane fractions obtained to examine NHE-1 protein interactions during B[a]P-induced apoptosis. RESULTS: We found that NHE-1 is preferentially located in cholesterol-rich microdomains and that B[a]P activates NHE-1 via its relocation and binding of calmodulin outside these specialized plasma membrane microstructures; these events are necessary for the execution of the apoptosis-related intracellular alkalinization. CONCLUSION: Plasma membrane location of NHE-1 affects its protein interactions and apoptotic function.
ISSN: 1015-8987

inserm-00871487
http://www.hal.inserm.fr/inserm-00871487
http://www.hal.inserm.fr/inserm-00871487/document
http://www.hal.inserm.fr/inserm-00871487/file/NHE-1_Relocation_Outside_Cholesterol.accepted.pdf
DOI : 10.1159/000171027

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ronda peridotite massif in Southern Spain shows a well-defined 'recrystallization' front that separates a large-scale partial melting domain formed at the expense of the continental lithospheric mantle from a 'preserved' lithospheric domain. To investigate the processes allowing a transient lithosphere-asthenosphere boundary to propagate in the lithospheric mantle, we performed a joint petrostructural and geochemical study of an similar to 2.5 km(2) zone extending from the melting front to the mylonites that mark the western limit of the massif. This study emphasizes a feedback between heat transfer, melt percolation, and deformation in the lithospheric mantle. Petrographical observations and geochemical data show that heterogeneous reactive percolation of melts produced in the underlying partial melting domain led to refertilization of lithospheric peridotites up to 1.5 km ahead from the melting front, producing metre-scale layering of fertile and refractory mantle rocks. Within 800 m from the front, pre-existing garnet pyroxenite layers were partially molten and the resulting melts probably contributed to the refertilization process. Detailed structural mapping and analysis of the microstructures and crystal preferred orientations highlight the relations between reactive melt transport and deformation, and the control of the temperature gradient on both processes. Parallelism between the recrystallization front, compositional boundaries, and deformation structures, as well as variations in the deformation intensity of pyroxenes and spinels, suggest syn- to late-tectonic melt transport controlled by both the deformation and the thermal gradient. Variations in the strength of olivine crystal preferred orientations as a function of the modal and chemical composition of the spinel tectonites point to a higher contribution of diffusion to deformation in the most fertile rocks, corroborating the hypothesis that deformation occurred in presence of melt. Finally, the systematic dispersion of olivine [100] and orthopyroxene [001] axes in the foliation plane suggests a dominantly transpressive deformation regime.
ISSN: 0022-3530

hal-00420904
https://hal.archives-ouvertes.fr/hal-00420904
DOI : 10.1093/petrology/egp032

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 1415 m deep IODP Hole U1309D (Mid-Atlantic Ridge, 30 degrees N) is the second deepest hole drilled into slow spreading oceanic lithosphere. The recovered section comprises essentially gabbroic rocks, with a large range of compositions. The most primitive end-members of the gabbroic sequence, herein referred to as olivine-rich troctolites (ol > similar to 70%), have textures and geochemical compositions intermediate between that of mantle peridotites and primitive cumulates, indicative of melt impregnation processes. We carried out a detailed microstructural study to further characterize the petrogenetic processes leading to their formation, as well as discuss their mode of emplacement and relationship with neighboring mantle lithosphere. In olivine-rich troctolites, olivines range from coarse-grained subhedral crystals, commonly containing well-developed subgrains, to medium-grained rounded crystals with fewer or no substructures. They are embedded in large, undeformed pyroxene and plagioclase poikiloblasts. Olivine substructures reveal dislocation creep that is consistent with activation of the main high-temperature slip systems, dominantly (010)[100]. Olivine crystallographic preferred orientation is very weak but generally shows a relatively stronger, uncommon [001] concentration. These unusual olivine fabrics are interpreted as resulting from melt impregnation of a previously deformed olivine matrix: the solid olivine framework is disrupted by olivine corrosion along grain and subgrain boundaries, and the high-temperature plastic fabric is modified in a liquid-dominated regime. Based on mineral composition and fabrics and in comparison with what is observed in impregnated mantle rocks elsewhere, we posit that olivine represents relicts of mantle peridotites disaggregated by large melt influx, although the mantle origin of olivine is not unequivocally demonstrated yet. Whatever the initial lithology, impregnation by large volumes of melt has strongly modified the original composition and microstructure. If the mantle origin hypothesis is correct, the original olivine fabric could have been efficiently weakened by dunitization prior to disruption of the olivine framework by melt impregnation. Incorporation, at the base of the lithosphere, of small slivers of impregnated dunite into gabbroic sections, trapped between successive igneous units, may be a common mechanism of lower crustal accretion at slow spreading ridges. Extensive melt-rock interaction processes are expected to contribute significantly to the final chemical composition of erupted lavas.
ISSN: 1525-2027

hal-00496391
https://hal.archives-ouvertes.fr/hal-00496391
DOI : 10.1029/2009GC002995

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report microstructural evidence for fluid-assisted ductile strain localization in a ≤ 50 m-wide mylonitic–ultramylonitic shear zone in the Ronda Peridotite massif, Southern Spain. Strain localization occurred at relatively low pressure (< 0.8 GPa) and moderate temperature (750–1000 °C). Initial deformation by dislocation creep resulted in formation of mylonites. Focusing of aqueous fluids in the shear zone favored the activation of dissolution–precipitation creep, resulting in further strain localization. This process is recorded by two generations of ultramylonitic bands composed of fine-grained, well-mixed olivine–orthopyroxene aggregates. Microstructural observations in the ultramylonites suggest alternating dissolution and precipitation of olivine and orthopyroxene, which may be explained by local changes in silica molality of the percolating fluid (disequilibrium and mass transfer at scales > mm). In the mylonites, olivine shows a crystal preferred orientation (CPO) coherent with dominant (001)[100] glide, probably due to the presence of interstitial fluids during deformation. In the ultramylonites, olivine CPO is weak to very weak, consistently with a decreasing contribution of dislocation creep to deformation. In contrast, fine-grained orthopyroxene in both mylonites and ultramylonites displays a clear CPO characterized by a [001] maximum normal to the foliation, which is not consistent with dislocation glide in any known slip system for orthopyroxene. We interpret this CPO as formed by oriented crystallization during dissolution–precipitation. In the present study, dissolution–precipitation creep predominates only in small-scale ultramylonite bands due to limited fluid availability and localized dynamic permeability. However, this process may be important in intermediate temperature domains of subduction zones, where it may lead to a feedback between strain localization and fluid transport.
ISSN: 0024-4937

hal-01395122
https://hal.archives-ouvertes.fr/hal-01395122
DOI : 10.1016/j.lithos.2016.07.038

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Garnet growth in high-pressure, mafic garnet granulites formed by dehydration melting of hornblende-gabbronorite protoliths in the Jijal complex (Kohistan palaeo-island arc complex, north Pakistan) was investigated through a microstructural EBSD-SEM and HRTEM study. Composite samples preserve a sharp transition in which the low-pressure precursor is replaced by garnet through a millimetre-sized reaction front. A magmatic foliation in the gabbronorite is defined by mafic-rich layering, with an associated magmatic lineation defined by the shape-preferred orientation (SPO) of mafic clusters composed of orthopyroxene (Opx), clinopyroxene (Cpx), amphibole (Amp) and oxides. The shape of the reaction front is convoluted and oblique to the magmatic layering. Opx, Amp and, to a lesser extent, Cpx show a strong lattice-preferred orientation (LPO) characterized by an alignment of [001] axes parallel to the magmatic lineation in the precursor hornblende-gabbronorite. Product garnet (Grt) also displays a strong LPO. Two of the four < 111 > axes are within the magmatic foliation plane and the density maximum is subparallel to the precursor magmatic lineation. The crystallographic relationship < 111 >(Grt)//[001](Opx,Cpx,Amp) deduced from the LPO was confirmed by TEM observations. The sharp and discontinuous modal and compositional variations observed at the reaction front attest to the kinetic inhibition of prograde solid-state reactions predicted by equilibrium-phase diagrams. The P-T field for the equilibration of Jijal garnet granulites shows that the reaction affinities are 5-10 kJ mol.(-1) for the Grt-in reaction and 0-5 kJ mol.(-1) for the Opx-out reaction. Petrographic and textural observations indicate that garnet first nucleated on amphibole at the rims of mafic clusters; this topotactic replacement resulted in a strong LPO of garnet. Once the amphibole was consumed in the reaction, the parallelism of [001] axes of the mafic-phase reactants favoured the growth of garnet crystals with similar orientations over a pyroxene substrate. These aggregates eventually sintered into single-crystal garnet. In the absence of deformation, the orientation of mafic precursor phases conditioned the nucleation site and the crystallographic orientation of garnet because of topotaxial transformation reactions and homoepitaxial growth of garnet during the formation of high-pressure, mafic garnet-granulite after low-pressure mafic protoliths.
ISSN: 0263-4929

hal-00411323
https://hal.archives-ouvertes.fr/hal-00411323
DOI : 10.1111/J.1525-1314.2008.00789.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Ibituruna quartz-syenite was emplaced as a sill in the Ribeira-Aracuai Neoproterozoic belt (Southeastern Brazil) during the last stages of the Gondwana supercontinent amalgamation. We have measured the Anisotropy of Magnetic Susceptibility (AMS) in samples from the Ibituruna sill to unravel its magnetic fabric that is regarded as a proxy for its magmatic fabric. A large magnetic anisotropy, dominantly due to magnetite, and a consistent magnetic fabric have been determined over the entire Ibituruna massif. The magmatic foliation and lineation are strikingly parallel to the solid-state mylonitic foliation and lineation measured in the country-rock. Altogether, these observations suggest that the Ibituruna sill was emplaced during the high temperature (similar to 750 degrees C) regional deformation and was deformed before full solidification coherently with its country-rock. Unexpectedly, geochronological data suggest a rather different conclusion. LA-ICP-MS and SHRIMP ages of zircons from the Ibituruna quartz-syenite are in the range 530-535 Ma and LA-ICP-MS ages of zircons and monazites from synkinematic leucocratic veins in the country-rocks suggest a crystallization at similar to 570-580 Ma, i.e., an HT deformation >35My older than the emplacement of the Ibituruna quartz-syenite. Conclusions from the structural and the geochronological studies are therefore conflicting. A possible explanation arises from Ar-40-Ar-39 thermochronology. We have dated amphiboles from the quartz-syenite, and amphiboles and biotites from the country-rock. Together with the ages of monazites and zircons in the country-rock, Ar-40-Ar-39 mineral ages suggest a very low cooling rate: <3 degrees C/My between 570 and similar to 500 Ma and similar to 5 degrees C/My between 500 and 460 Ma. Assuming a protracted regional deformation consistent over tens of My, under such stable thermal conditions the fabric and microstructure of deformed rocks may remain almost unchanged even if they underwent and recorded strain pulses separated by long periods of time. This may be a characteristic of slow cooling "hot orogens" that rocks deformed at significantly different periods during the orogeny, but under roughly unchanged temperature conditions, may display almost indiscernible microstructure and fabric.
ISSN: 0040-1951

hal-00445262
https://hal.archives-ouvertes.fr/hal-00445262
DOI : 10.1016/j.tecto.2009.02.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The subcontinental lithospheric mantle evolves through time due to tectonic events and processes as static recrystallization and melt percolation. To constrain the extent of these processes in the South Patagonian subcontinental mantle lithosphere we performed a microstructural and Electron Backscattered Diffraction (EBSD) study of a suite of 35 peridotite xenoliths brought to the surface by Plio-Pleistocene alkaline volcanic rocks from Gobernador Gregores and Pali Aike. All samples show a well-developed olivine and pyroxene crystallographic preferred orientation (CPO), consistent with deformation by dislocation creep with dominant activation of [100]{0kl} in olivine. The coarse granular or tabular textures and the low density of intracrystalline deformation features indicate that deformation was followed by annealing under static conditions. The xenoliths also show microstructural evidence of multiple episodes of reactive melt percolation. Neither annealing nor melt percolation erased the olivine CPO, which has [010]-fiber, [100]-fiber and orthorhombic patterns in Pali Aike xenoliths and essentially [010]-fiber and orthorhombic patterns in Gobernador Gregores xenoliths. Seismic properties calculated based on the CPO and modal compositions are, however, rather homogeneous, with fast S-wave polarization and P-wave propagation parallel to the [100] olivine axis. The variation in the olivine CPO solely changes the minimum S-wave birefringence direction, which is normal to the foliation for axial-[010] olivine CPO. Average samples for the two localities, obtained by adding up the individual samples CPO data in a common reference frame, show, however, a 'normal' upper mantle anisotropy with a maximum S-wave birrenfringence of ca. 5% at high angle to the both the maximum [010] and [100] axes concentrations, that is in the foliation, but normal to the lineation, and a minimum birefringence at low angle to the [100] maximum, that is parallel to the lineation.
ISSN: 0040-1951

hal-01053500
https://hal.archives-ouvertes.fr/hal-01053500
DOI : 10.1016/j.tecto.2014.02.017

Éditeur(s) : HAL CCSD Taylor & Francis: STM, Behavioural Science and Public Health Titles
Résumé : International audience
The dislocation microstructures in a single crystal of olivine deformed experimentally in uniaxial compression at 1090 °C and under a confining pressure of 300 MPa, have been investigated by transmission electron tomography in order to better understand deformation mechanisms at the microscale relevant for lithospheric mantle deformations. Investigation by electron tomography reveals microstructures, which are more complex than previously described, composed of and dislocations commonly exhibiting 3D configurations. Numerous mechanisms such as climb, cross-slip, double cross-slip as well as interactions like junction formations and collinear annihilations are the source of this complexity. The diversity observed advocates for microscale deformation of olivine significantly less simple than classic dislocation creep reported in metals or ice close to melting temperature. Deciphering mechanism of hardening in olivine at temperatures where ionic diffusion is slow and is then expected to play very little role is crucial to better understand and thus model deformation at larger scale and at temperatures (900–1100 °C) highly relevant for the lithospheric mantle.
ISSN: 1478-6443

hal-01667146
https://hal.archives-ouvertes.fr/hal-01667146
DOI : 10.1080/14786435.2017.1367858

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD
Résumé : Two major findings emerge from the theoretical analysis of Transport-Tourism link via a game theory type model of capacity coordination. Firstly the model explains the optimal capacities ratio of Transport and Tourism by the quotient of the ratio of tourism type (ratio of the length of stay in the destination and of transport duration) divided by the installation costs ratio (of transport and tourism).The corollary of this first finding gives the second outcome: The optimal transport and Tourism profit ratio is the product of the ratio of the type of tourism by the index of overcapacity conditions (a non linear combination of installation costs, and durations). From these results, it follows an interpretive grid that allows, according to tourism types, firstly to identify the optimal overcapacities by the difference between installation costs; and secondly the equilibrium ratio of profits according to the overcapacity direction and the tourism types.
Deux résultats ressortent de l’analyse théorique du lien Transport-tourisme via un modèle de coordination des capacités : l’expression et les déterminants des capacités et des profits optimaux relatifs du Transport et du Tourisme. L’article démontre que le rapport des capacités optimales de transport et de tourisme dépend du ratio comparatif de leurs coûts d’installation à celui inversé de leur poids relatif. Ce premier résultat a pour corollaire le second : le rapport d’équilibre des profits est le produit des indicateurs du type de tourisme (le ration des temps respectifs dans le transport et dans la destination) de la destination par celui identifiant les conditions de surcapacité relative. De ces résultats généraux, il suit une grille d’interprétation qui permet d’identifier d’abord le rapport optimal des capacités selon l’écart entre les coûts d’installation et le type de tourisme ; et ensuite le rapport d’équilibre des profits selon les sens des surcapacités relatives et le types de tourisme.
https://hal.univ-antilles.fr/hal-01265798

Droits : info:eu-repo/semantics/OpenAccess
hal-01265798
https://hal.univ-antilles.fr/hal-01265798
https://hal.univ-antilles.fr/hal-01265798/document
https://hal.univ-antilles.fr/hal-01265798/file/TOURISME-TRANSPORT%20-%20CAPACITY%20COORDINATION%20VERS%20FRANC.pdf