Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Time-series bathymetric data acquired from 1967 to 2011 are used to evaluate the morphological evolution of the continental shelf and upper continental slope off the city of Nice (SE France, Ligurian Sea). Mapping in water depths of 0–300 m was undertaken to identify the changing morphology of landslide scars and their erosive chutes. Quantitative Digital Terrain Model (DTM) comparisons reveal areas of erosion and deposition over intervals of 5–8 years. Sediment remobilization events on the upper slope (above depths of 200 m) are frequent and significant; landslide scars with volumes > 25,000 m3 can occur with frequencies of < 8 years. Shelf break retreat toward the coastline can reach 60 m over 7–8 years where the continental shelf is wider (> 200 m). Periods of quiescence (1980–1990 and 2006–2011) are seen to alternate with periods when rapid retrogressive failure increase sediment volumes eroded from the upper slope-shelf transition by an order of magnitude (1999–2006). Temporal variations in landslide activity were correlated to several potential triggering factors that individually would not induce failures, including earthquake activity, rapid deposition of fine-grained sediments on a steep slope, and rainfall leading to fresh groundwater circulation below the shelf. This 4D bathymetric study suggests that over the last 50 years the most important factor triggering landslides offshore Nice is overpressure due to freshwater outflows.
ISSN: 0025-3227

hal-01346866
https://hal.archives-ouvertes.fr/hal-01346866
DOI : 10.1016/j.margeo.2016.06.009

Éditeur(s) : Society for Sedimentary Geology
Résumé : The Kramis deep-sea fan extends over 45 km at the base of the western Algerian continental slope between 2000 and 2550 m water depth and covers an area of approximately 1200 km2. The Kramis Fan was initiated after Messinian time, evolved during the Plio-Quaternary, and, is still active, as proved by submarine cable breaks during the 1954 Orléansville earthquake. The Kramis Fan is fed by two perpendicular canyons: the Kramis Canyon and the Khadra Canyon, merging in a single E–W-oriented channel confined at the foot of the slope. It is strongly asymmetric with a super-developed levee on the right-hand side of the channel, the Kramis Ridge. Based on recent multibeam, side-scan sonar, and sediment core data (Maradja, 2003 and 2005, Prisma, 2004, and Prisme, 2007 cruises), we describe the morphology and internal structure of the fan and particularly the sediment ridge, showing marked lateral changes in the sediment-wave morphology and their association with a series of large scours in the intermediate part of the ridge aligned in the continuity of the Khadra Canyon direction. Overall, the Kramis Ridge is formed by turbidity currents overspilling the ridge crest, which is 100 m above the channel floor, with two exceptions. In the distal part of the ridge the subdued ridge-crest height probably causes continuous overspill, testified by sediment waves migrating parallel to the channel. The scours occur in the intermediate part of the ridge where the ridge height is only 50–60 m; scours are interpreted as the result of cyclic steps due to flow stripping of currents provided by the intersection of the Khadra Canyon with the Kramis Canyon and Channel system. The scours probably postdate the main growth of the Kramis Ridge and induce the local erosion of the ridge, which could correspond to a new channel initiation cutting the ridge. The superposition or the interaction of flows with different directions is responsible of the amplification of the size of the sediment waves with erosional downside flanks and their transformation in scours. The Kramis Fan provides a clear example of flow interaction to explain the presence of large sediment waves and scours on modern submarine fans.
SEPM Special Publication (1060-071X) (Society for Sedimentary Geology), 2012 , Vol. 99 , P. 293-308

Droits : 2012 SEPM (Society for Sedimentary Geology)
http://archimer.ifremer.fr/doc/00129/24021/21978.pdf
http://archimer.ifremer.fr/doc/00129/24021/

Éditeur(s) : Elsevier
Résumé : Marine fish larvae undergo major morphological and cellular changes during the first month of life. The ontogeny of the gastrointestinal tract combines these two aspects of the larval development and is very interesting in that the timing of functional changes appears genetically hard-wired. The goal of this paper is to give an overview of the gastrointestinal development process in marine fish larvae, with particular attention to three species: sea bass; red drum; and sole, since the description of gut maturation in fish larvae was initiated during the last decade with these species. During the early stages, marine fish larvae exhibit particular digestive features. Concerning the exocrine pancreas, amylase expression decreases with age from the third week post-hatching in sea bass and red drum (approximately 400 degree days), whereas expression of other enzymes (trypsin, lipase, phospholipase A2...) increases until the end of the larva period. Moreover, secretory function of the exocrine pancreas progressively develops and becomes efficient after the third week of life. Concerning the intestine, enzymes of the enterocyte cytosol (in particular peptidase) have higher activity in young larvae than in older. Approximately in the fourth week of post-hatching development in sea bass, red drum and sole larvae, the cytosolic activities dramatically decline concurrently with a sharp increase in membranous enzyme activities of the brush border, such as alkaline phosphatase, aminopeptidase N, maltase... This process characterises the normal maturation of enterocytes in developing fish larvae and also in other vertebrates' species. The establishment of an efficient brush border membrane digestion represents the adult mode of digestion of enterocytes. This paper also describes the role of diet on the development of the gastrointestinal tract. Indeed, the maturational process of digestive enzyme can be enhanced, stopped, or delayed depending on the composition of the diet.
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology (1532-0456) (Elsevier), 2001-12 , Vol. 130 , N. 4 , P. 477-487

Droits : 2001 Elsevier Science Inc. All rights reserved
http://archimer.ifremer.fr/doc/2001/publication-650.pdf
DOI:10.1016/S1532-0456(01)00274-5
http://archimer.ifremer.fr/doc/00000/650/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
In places where sedimentation and erosion compete at fast rates, part of the record of past earthquakes on faults may be buried, hence hidden, in the first few metres below the surface. We developed a novel form of palaeoseismology, of geophysical type, based on the use of a dense pseudo-3-D Ground Penetrating Radar (GPR) survey to investigate such possible buried earthquake traces, on a long, fast-slipping strike-slip fault (Hope fault, New Zealand), at a site (Terako) where marked alluvial conditions prevail. We first used LiDAR data to analyse the ground surface morphology of the 2 km2 site at the greatest resolution. Nineteen morphological markers were observed, mainly alluvial terrace risers and small stream channels that are all dextrally offset by the fault by amounts ranging between 3 and 200 m. The measurements document about 10 past earthquake slip events with a mean coseismic slip of 3.3 +/- 1 m, with the most recent earthquake event having a slip of 3 +/- 0.5 m. We then investigated a detailed area of the site (400 x 600 m2) with pseudo-3-D GPR. We measured 56, similar to 400 m long, 510 m spaced GPR profiles (250 MHz), parallel to the fault and evenly distributed on either side. The analysis revealed the existence of a palaeosurface buried at about 3 m depth, corresponding to the top of alluvial terraces of different ages. That buried surface is incised by a dense network of stream channels that are all dextrally offset by the fault. We measured 48 lateral offsets in the buried channel network, more than twice than at the surface. These offsets range between 6 and 108 m, as observed at the surface, yet provide a more continuous record of the fault slip. The similarity of the successive slip increments suggests a slip per event averaging 4.4 +/- 1 m, fairly similar to that estimated from surface data. From the total surface and buried 67 offset collection, we infer that a minimum of 30 large earthquakes have broken the Hope fault at the Terako site in the last about 67 kyr, with an average coseismic slip of 3.2 +/- 1 m, a minimum average recurrence time of about 200 yr, and a magnitude of at least Mw 7.07.4. Our study therefore confirms that part of the record of past earthquakes may indeed reside in the first few metres below the surface, where it may be explored with geophysical, GPR-based palaeoseismology. Developing such a new palaeoseismological tool should provide rich information that may complement surface observations and help to document the past earthquakes on faults.
ISSN: 0956-540X

hal-00704560
https://hal.archives-ouvertes.fr/hal-00704560
DOI : 10.1111/j.1365-246X.2012.05366.x

Éditeur(s) : HAL CCSD
Résumé : International audience
Afro-­‐‑ Caribbean sprinters often reach high performance levels at an early age. Adolescence is a time of morphological and physiological changes. This study was designed to analyze the evolution in parameters of short sprint performance during adolescence in Afro-­‐‑ Caribbean boys, especially the stride number/body height ratio (SN/BH), which is at the interface of technical and morphological factors. Seventy-­‐‑ one 13-­‐‑ year-­‐‑ old boys performed vertical jumps and short sprint races. The races were filmed with a view to determine stride variables. Anthropometric parameters were also measured. The same tests were performed two years later. Body height and SN/BH were the main predictors of sprint performance. The delta of performance was principally explained by stride length and stride number. Although deterioration in technical parameters was expected, the parameters related to body size and stride length were the main sprint performance predictors rather than explosive force. These results could be useful in developing tests to detect sprint potential in youth.
Journal of Human Kinetics

hal-01163933
https://hal.univ-antilles.fr/hal-01163933

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
1. Our understanding of the contribution of interspecific interactions to functional diversity in nature lags behind our knowledge of spatial and temporal patterns. Although two-species mutualisms are found in all types of ecosystems, the study of their ecological influences on other community members has mostly been limited to third species, while their influence on entire communities remains largely unexplored. 2. We hypothesized that mutualistic interactions between two respective ant species and an epiphyte mediate the biological traits composition of entire invertebrate communities that use the same host plant, thereby affecting food webs and functional diversity at the community level. 3. Aechmea mertensii (Bromeliaceae) is both a phytotelm ('plant-held water') and an ant-garden epiphyte. We sampled 111 bromeliads (111 aquatic invertebrate communities) associated with either the ant Pachycondyla goeldii or Camponotus femoratus. The relationships between ants, bromeliads and invertebrate abundance data were examined using a redundancy analysis. Biological traits information for invertebrates was structured using a fuzzy-coding technique, and a co-inertia analysis between traits and abundance data was used to interpret functional differences in bromeliad ecosystems. 4. The vegetative traits of A. mertensii depended on seed dispersion by C. femoratus and P. goeldii along a gradient of local conditions. The ant partner selected sets of invertebrates with traits that were best adapted to the bromeliads' morphology, and so the composition of the biological traits of invertebrate phytotelm communities depends on the identity of the ant partner. Biological traits suggest a bottom-up control of community structure in C. fenaoratus-associated phytotelmata and a greater structuring role for predatory invertebrates in P. goeldii-associated plants. 5. This study presents new information showing that two-species mutualisms affect the functional diversity of a much wider range of organisms. Most biological systems form complex networks where nodes (e.g. species) are more or less closely linked to each other, either directly or indirectly, through intermediate nodes. Our observations provide community-level information about biological interactions and functional diversity, and perspectives for further observations intended to examine whether large-scale changes in interacting species/community structure over broad geographical and anthropogenic gradients affect ecosystem functions.
Functional Ecology

hal-01096909
https://hal-agroparistech.archives-ouvertes.fr/hal-01096909
DOI : 10.1111/j.1365-2435-2011.01863.x

Éditeur(s) : HAL CCSD
Résumé : At present, the forecasting of littoral evolution presents a considerable social stake. Many studies have been achieved to better understand coastal dynamics. Such dynamics are controlled by morphology, sediment supply, hydrodynamics, eustacy... at different time scales. At geological time scale, deposits geometry, controlled by eustacy and subsidence, is succesfully analysed where sediment supply is high. But the littoral zones present important sediment supply variability. In low sediment supply areas, the record of coastal tracts is smaller and harder to interprete. Analyses of about 250 kilometres of new VHR seismic profiles acquired along the languedocian coast (Northern Gulf of Lion, France), tens of short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal tracts from Quaternary to present-day. This highlighted the role of alongshore dynamics in coast where direct sediment supply is low. The concepts of protected lagoon and isolated lagoon were broughted to the fore and the effect of inherited incised valley morphology was discussed. Last, a complementary study by analogue modeling of the channel incision processes controled by eustatic and climatic changes allowed to discuss the role of incised valleys in coastal areas.
Actuellement, la prévision de l'évolution d'un système littoral représente un enjeu social important. De nombreuses études sont réalisées afin de mieux connaitre la dynamique côtière et donc de comprendre les facteurs qui influencent son évolution. Cette dynamique est contrôlée par la morphologie, les apports sédimentaires, l'hydrodynamique, l'eustatisme... qui agissent à des échelles de temps différentes et avec de fortes interactions. A l'échelle géologique, l'architecture des dépôts, contrôlée par l'eustatisme et la subsidence, est parfaitement décrite dans les zones à forts apports sédimentaires. Par contre, dans les zones à faibles apports sédimentaires, l'enregistrement des cortèges côtiers est réduit et est difficile à interpréter. L'analyse de 250 kilomètres de profils sismiques THR sur le littoral languedocien (Nord du Golfe du Lion, France), de carottages et de données de terrain a permis de déterminer la géométrie en trois dimensions des cortèges sédimentaires côtiers depuis le Quaternaire jusqu'à l'actuel. Ces observations montrent l'importance de la dynamique longshore sur les littoraux pauvres en apports sédimentaires directs. De plus, l'étude d'un système lagunaire sur ce littoral met en évidence les concepts de lagunes protégées et lagunes isolées ainsi que l'importance des vallées incisées dans la génèse de ces environnements. Enfin, la modélisation en laboratoire des processus d'incision de chenaux sous contrôle eustatique et climatique permet de discuter le rôle des vallées incisées en milieu côtier.
https://tel.archives-ouvertes.fr/tel-00542897

tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897/document
https://tel.archives-ouvertes.fr/tel-00542897/file/theseraynaldef.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimentally Assisted Molecular Modelling (EAMM) is an original approach for predicting the structure of organic micro-crystals and deducing their habit in the presence of various solvents and additives. It is applied here in the case of n-octylamino-nitrobenzoxadiazole (nOA-NBD), a fluorescent compound. This general approach is first of all described and validated by its blind application to three known and closely-related crystals. Then, the whole process is applied to predict the molecular crystal generated by n-octylamino-NBD, including the molecule conformation, its structure (cell parameters, molecular packing, X-ray powder diagrams) and its theoretical plus actual habits in the presence of a solvent (p-xylene) and two additives (acetic acid and n-dodecane). The conformation of the predicted molecule is validated by comparison with two similar molecules embedded in observable crystals. Then, the choice between two proposed structures (with the same energy and two equiprobable packings) is based on the comparison between experimental and re-computed X-ray powder diffraction diagrams, and also on the interpretation of an actual TEM image in the light of the proposed cell parameters. This choice is confirmed by the comparison between the vapour-grown face development (proposed by the BFDH or the attachment energy models) and the actual face development in a pure solvent. Finally, the actual habit deduced from comparing the crystal attachment energy with the adsorption energy of solvent or additive molecules is validated by SEM images of NBD micro-crystals in presence of the solvent alone or in presence of both additives. In conclusion, the EAMM approach appears to be a decisive tool for quickly simulating structural and habit properties of the molecular crystals, accessible or not by experimentation. Thus, a numerical selection of molecules becomes possible in view of deriving organic materials with predetermined properties, such as the fluorescence properties of the compound considered in the present study.
ISSN: 0022-0248

hal-00857894
https://hal.archives-ouvertes.fr/hal-00857894
DOI : 10.1016/j.jcrysgro.2011.07.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : Barrier island hydro-morphodynamics driven by typhoon events are the major concern of the project KUNSHEN (2011-2014). It aims at providing for a deep understanding of the peculiar dynamics of sand barriers where extreme events such as typhoons have a significant impact. We present the campaigns and the protocols achieved and planned in the project, on the Wan-tzu-liao sand barrier, Cigu Lagoon, Tainan, Taiwan, from October 2011 to January 2012, during the winter storm season and during summer 2012 during the typhoon season. A set of current profilers are deployed along a cross shore transect at 7, 4 and 2 meters deep. On the Wan-tzu-liao sand barrier, 3 columns of 3 pressiometers are deployed to survey the submersion. In the same time, morphological surveys are performed on the sand barrier with DGPS to analyse any change in the shoreline position, the beach slope, and the dynamics of sand beach features. A very preliminary analysis on these on-going field surveys suggests that the word "extreme" refers more to the consequence of the forcing on the sand barrier than the intensity of the forcing itself. The strategy developed in this first step will be refined to survey the next typhoon season, from May 2012 to October 2012.
ISSN: 1760-8716

hal-00854411
https://hal.archives-ouvertes.fr/hal-00854411
DOI : 10.5150/jngcgc.2012.034-M

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : Wiley-blackwell
Résumé : An ecomorphological method was developed, with a focus on predation functions, to define functional groups in the Celtic Sea fish community. Eleven functional traits, measured for 930 individuals from 33 species, led to 11 functional groups. Membership of functional groups was linked to body size and taxonomy. For seven species, there were ontogenetic changes in group membership. When diet composition, expressed as the proportions of different prey types recorded in stomachs, was compared among functional groups, morphology-based predictions accounted for 28-56% of the interindividual variance in prey type. This was larger than the 12-24% of variance that could be explained solely on the basis of body size. (C) 2013 The Fisheries Society of the British Isles
Journal Of Fish Biology (0022-1112) (Wiley-blackwell), 2013-08 , Vol. 83 , N. 2 , P. 355-377

Droits : 2013 The Fisheries Society of the British Isles
http://archimer.ifremer.fr/doc/00152/26294/24831.pdf
DOI:10.1111/jfb.12177
http://archimer.ifremer.fr/doc/00152/26294/

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The Chile-Argentina Patagonian Cordillera is a natural laboratory to study the interactions between oceanic and continental lithosphere during the subduction of an active spreading ridge beneath a continent. Subduction of the South Chile spreading ridge, which separates the Nazca plate from the Antarctic plate, started around 15–14 Ma at the southern tip of Patagonia. Presently, the southernmost segment of the Chile Ridge enters the Peru-Chile trench at 46°S, at the site of the Chile Triple Junction (CTJ). We review the main events which occurred on land in the CTJ region (46–47°S), related with processes of ridge subduction. We summarize tectonic, sedimentary, and magmatic features in a 30 Ma-to Present chronological table. A preridge subduction stage, from 30 to 15 Ma, is characterized by the onset and growth of Patagonian relief and by a shift from marine to continental detrital sedimentation in the foreland at 20–22 Ma. The change from pre-ridge subduction to ridge subduction is marked on land by a transition from calc-alkaline to alkaline volcanism, at 14–12 Ma, and by the onset of eruption of very large fl ood basalt provinces (future volcanic plateaus) following rapid erosion of the eastern foreland belt. Post-plateau basaltic volcanism (<4 Ma) is coeval with a period of tectonic and morphological rejuvenation during which the eastern foreland of the Cordillera has been affected by extensional/transtensional tectonics. We place these events in the framework of a tectonomagmatic model involving the opening of slab windows due to both slab tear and ridge axis subduction.
Subduction Zone Geodynamics

hal-00421053
https://hal.archives-ouvertes.fr/hal-00421053
DOI : 10.1007/978-3-540-87974-9_12

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Selected high-resolution seismic-reflection profiles and multibeam bathymetry acquired along the convergent Ecuador margin during the ATACAMES cruise on onboard the R/V L’Atalante (Jan.15–Feb.18, 2012) allow a preliminary evaluation of the neotectonic development and stratigraphic evolution of the margin based on the sismo-stratigraphic analysis of Quaternary sediment preserved on the margin shelf and upper slope. We present three major preliminary results. (1) The evolution of the Esmeraldas, Guayaquil and Santa Elena canyons. The head of the Esmeraldas canyon is the location of a continuous significant sediment transport. The Guayaquil canyon shows several episodes of deposition and incision. Aggrading sedimentation pattern in the canyon records several changes in relative sea-level. The subsidence of the Gulf of Guayaquil probably contributes to the good preservation of the canyon filling stages. The Santa Elena canyon is controlled by a SW–NE trending normal fault. (2) Variations of sediment accumulation and relative vertical motions are shown along-strike the shelf edge. Offshore the uplifted Manta peninsula, a pronounced subsidence of the shelf edge is documented by sedimentary clinoforms that have deposited in a morphological reentrant, and have migrated upslope testifying of a local subsidence meanwhile the adjacent La Plata Island area underwent uplift. In the Esmeraldas canyon area, a local uplift of the shelf is documented. (3) Two neotectonic fault systems with a possible transcurrent component are imaged across the shelf edge and upper margin slope offshore Jama, and Cape Galera. This possible transcurrent motion could be related to the reactivation of ancient faults of the upper plate by the subduction. These preliminary results indicate that the ATACAMES data set has a strong potential to evaluate the spatial and temporal contribution of tectonic and climate changes on the structural development and stratigraphic evolution of the Ecuador continental margin.
ISSN: 0025-3235

insu-01131151
https://hal-insu.archives-ouvertes.fr/insu-01131151
DOI : 10.1007/s11001-014-9231-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Zandjan province is situated in the NW of Iran, at the junction between the southern termination of the Tabriz right-lateral strike-slip fault and the western end of the Alborz active mountain range. Despite this key location, in terms of active tectonics, there is no destructive earthquake reported in available historical seismicity catalogues. Even if a few low magnitude instrumental earthquakes have been recorded indicating that this area is actively deforming, the Zandjan region can be considered as a seismic gap. Based on detailed field investigations, digital elevation models (DEMs), satellite image and aerial photo interpretations, we have identified a major active fault network affecting this regions. It is mainly constituted by several west and est verging thrust faults, trending NW-SE to N-S, that clearly cut Late Quaternary to Holocene deposits. Evidences in the morphology indicate also that they accommodate some right-lateral slip component. This fault network can be divided into four major fault zones affecting Zandjan city (present day population over 500,000) and part of the Zandjan-Mianeh basin more to the west. Based on fault geometrical characteristics (fault length, segmentation ... ) and kinematics, the Zandjan fault system is certainly capable to produce moderate to large earthquakes (Mw = 6.5-7.0) and serious damages in the Zandjan city and surrounding areas. The study of these faults is, then, of major interest for seismic hazard assessment in Zandjan province where total population exceed 1.5 million but also to better understand present day geodynamic of NW Iran.
ISSN: 0040-1951

hal-00617526
https://hal.archives-ouvertes.fr/hal-00617526
DOI : 10.1016/j.tecto.2011.04.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan (Sichuan, China) is characterised by an unusual morphology which results from a Triassic prism tectonics and a more recent Neogene thick-skin thrusting. Among its specific features is the high elevation of the internal zones in continuity with the Songpan Garze fold-and-thrust belt (SG), which is associated with an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau as revealed by the analysis of teleseismic data acquired by a dense seismic network. The jump in crustal thickness is located at the apex of the Wenchuan shear zone (WSZ) and marks the western boundary of the metamorphosed units of SG characterized by temperatures varying from 590 degrees C down to 300 degrees C as commonly observed in mature accretionary wedges. Both the structural style marked by intense shortening in tight kink folds and geophysical data suggest the presence of an horizontal discontinuity at similar to 15 km depth over a thick crust (similar to 63 km).;The Longmen Shan east of the WSZ is characterized by thick-skin detachment which thrusts the internal sedimentary units and the Proterozoic basement over the series of the Sichuan Basin deposited on a thinner crust of similar to 44 km thick. The major front is the Beichuan Fault Zone (BFZ) which brought the internal zones onto Triassic and Jurassic series with lower temperatures (less than 400 degrees C). Locally, temperatures of similar to 425 degrees C are found just below the klippes.;These results are in agreement with an original contact of the SG zone represented by an accretionary wedge of sediments thrusted over the margin of the continental crust of the Yangtze craton in the early stage (Indosinian) of the evolution. The present-day slow E-W component of the convergence, added to the difference in crustal thickness caused the Yangtze crust to indent the Songpan Tibetan crust which was softened by a high thermal regime. As a response the edge of the Tibet crust was inflated to the bottom (up to 70 km), whereas to the top, the crystalline massif were exhumed and pushed the deformation eastward as emerging and blind thrusts. This configuration reflects a moderate shortening of the crust which behaves as a soft thick material abutting the resistant and cold Yangtze crust.
ISSN: 0040-1951

hal-00534849
https://hal.archives-ouvertes.fr/hal-00534849
DOI : 10.1016/j.tecto.2010.03.018

Éditeur(s) : HAL CCSD Coastal Education and Research Foundation
Résumé : Nearshore bars are generally present on sandy coasts and play a significant role in wave breaking and sediment exchange between beach and shoreface. The study area is located on the Languedoc-Roussillon coast in the Gulf of Lions (southern part of the French Mediterranean coast). This microtidal environment is classified as a wave-dominated coast. The sand coast displays different bar systems (single or multiple; straight or crescentic). The alongshore variability of bar morphology in the nearshore zone was investigated in August 2009 during one week, using a topo-bathymetric LIDAR data set (300 km(2)). LIDAR makes it possible to cover a large area in a very short time with a high resolution. The topo-bathymetric LIDAR offers the added benefit of morphological information about the beach-sea transition in very shallow water (below I in), data often difficult if not impossible to obtain with traditional techniques. The purpose of this paper is 1) to depict the distribution of bars and their characteristics along the 180 km coast of the Gulf of Lions; 2) to update the classifications of sand bars typologies in Languedoc-Roussillon; 3) to pay particular attention to the description of the intricate inner system. Globally, cross-shore distribution of subtidal morphologies is characterized by both an outer and an inner system. The outer system is crescent-shaped in the south and straight in the northern part with a distinctive regional delimitation. The inner system comprises an inner bar and, near the coast, a complex fluctuating bar called Low Bar Beach (LBB). Several intermediate states were identified and added to the new classification proposed in this paper. These results clearly emphasize the importance of LIDAR technology for a better understanding of bar behaviour and single and/or multi-bar beach organisation.
ISSN: 0749-0208

hal-00783187
https://hal.archives-ouvertes.fr/hal-00783187

Éditeur(s) : HAL CCSD
Résumé : International audience
Afro-­ Caribbean sprinters often reach high performance levels at an early age. Adolescence is a time of morphological and physiological changes. This study was designed to analyze the evolution in parameters of short sprint performance during adolescence in Afro-­Caribbean boys, especially the stride number/body height ratio (SN/BH), which is at the interface of technical and morphological factors. Seventy-­‐‑ one 13-­‐‑ year-­‐‑ old boys performed vertical jumps and short sprint races. The races were filmed with a view to determine stride variables. Anthropometric parameters were also measured. The same tests were performed two years later. Body height and SN/BH were the main predictors of sprint performance. The delta of performance was principally explained by stride length and stride number. Although deterioration in technical parameters was expected, the parameters related to body size and stride length were the main sprint performance predictors rather than explosive force. These results could be useful in developing tests to detect sprint potential in youth.
Journal of Human Kinetics

hal-01143539
https://hal.univ-antilles.fr/hal-01143539