Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic tomography and high surface heat flow models indicate an anomalously thin and hot lithospheric mantle beneath the Canadian Cordillera. To understand the thermal and deformational history of the lithospheric mantle under these conditions, we performed a study of the microstructures, crystal preferred orientations (CPO), and seismic anisotropy of mantle xenoliths collected in the Summit Lake volcano in the southern Canadian Cordillera. The xenoliths vary in composition between spinel lherzolites, cpx-rich lherzolites, and wehrlites. All samples are coarse-grained and show clear evidence for annealing, but deformation microstructures are well-preserved in the spinel lherzolites. Olivine CPO is characterized by a strong point-maximum of [100] and by a girdle distribution of [010[ and [001] axes normal to it; CPO strength is variable, spinel-lherzolites have the strongest CPO. Some samples show a weak orthopyroxene CPO consistent with the olivine one. However most pyroxenes have random CPO, interstitial shapes and undeformed appearance, which suggest a secondary origin by reactive melt percolation under static conditions, leading to crystallization of cpx + sp +/- opx at the expenses of olivine, followed by crystallization of cpx + sp +/- ol at the expenses of opx to produce the wehrlites. The studied xenoliths have typical upper mantle seismic properties patterns with fastest propagation of P-waves and polarization of S-waves parallel to the olivine [100] maxima. Maximum P- and S-waves anisotropy for lherzolites are 8 and 5% respectively. Dispersion of the olivine CPO due to neocrystallization of olivine results in weaker anisotropies (6.5 and 3.5%) in wehrlites. Seismic velocities calculated using a geotherm consistent with the equilibrium temperatures of the Summit Lake xenoliths are 3-4% lower than those expected in a normal, 100 km-thick lithosphere, consistent with seismic tomography models for the region. This high geothermal gradient may be partially explained by considering the anisotropy of thermal conductivity of olivine and subhorizontal foliations in the lithospheric mantle, which result in a decrease by up to 15% of the thermal conductivity in the vertical direction.
ISSN: 0040-1951

hal-00618332
https://hal.archives-ouvertes.fr/hal-00618332
DOI : 10.1016/j.tecto.2011.04.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The subcontinental lithospheric mantle evolves through time due to tectonic events and processes as static recrystallization and melt percolation. To constrain the extent of these processes in the South Patagonian subcontinental mantle lithosphere we performed a microstructural and Electron Backscattered Diffraction (EBSD) study of a suite of 35 peridotite xenoliths brought to the surface by Plio-Pleistocene alkaline volcanic rocks from Gobernador Gregores and Pali Aike. All samples show a well-developed olivine and pyroxene crystallographic preferred orientation (CPO), consistent with deformation by dislocation creep with dominant activation of [100]{0kl} in olivine. The coarse granular or tabular textures and the low density of intracrystalline deformation features indicate that deformation was followed by annealing under static conditions. The xenoliths also show microstructural evidence of multiple episodes of reactive melt percolation. Neither annealing nor melt percolation erased the olivine CPO, which has [010]-fiber, [100]-fiber and orthorhombic patterns in Pali Aike xenoliths and essentially [010]-fiber and orthorhombic patterns in Gobernador Gregores xenoliths. Seismic properties calculated based on the CPO and modal compositions are, however, rather homogeneous, with fast S-wave polarization and P-wave propagation parallel to the [100] olivine axis. The variation in the olivine CPO solely changes the minimum S-wave birefringence direction, which is normal to the foliation for axial-[010] olivine CPO. Average samples for the two localities, obtained by adding up the individual samples CPO data in a common reference frame, show, however, a 'normal' upper mantle anisotropy with a maximum S-wave birrenfringence of ca. 5% at high angle to the both the maximum [010] and [100] axes concentrations, that is in the foliation, but normal to the lineation, and a minimum birefringence at low angle to the [100] maximum, that is parallel to the lineation.
ISSN: 0040-1951

hal-01053500
https://hal.archives-ouvertes.fr/hal-01053500
DOI : 10.1016/j.tecto.2014.02.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A set of four reactive flow-through experiments at temperature T = 100 degrees C and total pressure P=12 MPa was performed in limestone reservoir samples. By using various ranging from 0.7 to 10 MPa, these experiments mimic mass transfers occurring (1) near the injection well, where the brine is almost saturated with CO2 (i.e. P-CO2 approximate to P), and (2) at increasing distances from the injection well, where the fluid displays lower values and higher divalent cation concentrations due rock dissolution along the fluid pathway. Results for P-CO2 = 10 MPa show non-uniform dissolution features associated with transport-controlled mass transfer, while reaction-controlled uniform dissolution is observed for P-CO2 = 2.5 MPa. The experiment with P-CO2 = 6 MPa allows investigating in detail the transition from transport-to reaction-controlled dissolution. Conversely, the experiment reproducing conditions far from the injection well (P-CO2 = 0.7 MPa), shows a decrease of porosity triggered by the precipitation of Mg-rich calcite. For all the dissolution experiments, the time-resolved porosity phi(t) can be modeled by a simple non-linear equation including parameters that characterise the dissolution regime triggered by the reactivity of the inlet fluid (measured by the Damkohler number, Da). Furthermore, all dissolution experiments display power scaling between permeability (k) and porosity (phi) with distinctly different scaling exponents characterising the reactivity of the fluid percolating the sample, independently from the decrease with time of the reactive surface area. It is shown also that dissolution at moderate positive values of Da seems the most efficient to increase permeability and promote a rapid spreading of the reaction front, while inducing minimal modification of the porosity in the vicinity of the CO2 injection well. These results can be used to parameterize the k-phi function for modeling the earliest dissolution processes occurring in the vicinity of the reaction front.
ISSN: 0009-2541

hal-00445277
https://hal.archives-ouvertes.fr/hal-00445277
DOI : 10.1016/j.chemgeo.2009.03.028

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Interactions between deformation and melt percolation yield important consequences for the evolution of the mantle lithosphere, controlling its composition and mechanical behavior. In the Lherz massif (Pyrenees, France), the analysis of structural relationships between harzburgites, lherzolites and pyroxenites and of the crystal-preferred orientations (CPO) of olivine and pyroxenes highlights a strong feedback between percolation of basaltic melts and deformation under near-solidus conditions at the lithosphere–asthenosphere boundary. Elongated harzburgite bodies up to tens of meters wide, which are the remnants of an old lithospheric mantle, preserve a constant foliation. This foliation is locally outlined by cm-scale flattened websteritic lenses. At the contact with the enclosing lherzolites, the harzburgite foliation is crosscut by the lherzolites foliation and by cm-wide websterite bands parallel to the contact. Strain intensity in the lherzolites increases with distance to the harzburgites. Based on these observations, we propose that reactive percolation was synchronous to the deformation and propose that variations in instantaneous melt fraction, due to pyroxenes and spinel crystallization during reactive melt transport, guided strain localization. Accordingly, the observed decrease in olivine CPO intensity and change in CPO patterns from harzburgites to distal lherzolites are interpreted as recording changes in the relative contribution of dislocation glide and diffusion processes, which is ruled by a balance between the instantaneous melt fraction and the local strain rate. We also propose that the pervasive websteritic layering in the refertilized lherzolites may result from deformation-assisted melt segregation in a system with decreasing permeability due to refertilization reactions. Finally, we discuss the possible timing and geodynamical context of the refertilization episode.
ISSN: 0012-821X

hal-00411724
https://hal.archives-ouvertes.fr/hal-00411724
DOI : 10.1016/j.epsl.2008.07.053

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To better understand the microstructural evolution of a "serpentinized" mantle rock and the influence of various hydrous phases on the seismic properties of the mantle wedge, we have conducted the detailed microstructural analyses of a sample of tremolite-chlorite-antigorite schist collected from the Moses Rock dike (central part of the Colorado Plateau). We performed differential effective media (DEM) modelling to study the effect of three hydrous phases forming two-phase aggregates with olivine, considering the crystallographic preferred orientation (CPO) of each phase and the shape ratio of the hydrous phases. We have demonstrated that in a partially serpentinized peridotite, the olivine CPO characteristic of [100](010) dislocation glide is still preserved, and the high-temperature asthenospheric flow is preserved with a foliation normal to that of antigorite schist. The transformation of olivine into antigorite occurs predominantly (~ 75%) by the relationship (100)ol || (001)atg with [001]ol || [010]atg, with the (010)ol || (001)atg and [001]ol || [010]atg relationship observed in areas of weak antigorite CPO. Chlorite results from the phase transformation of olivine in a relatively static environment, as shown by the correlation between the olivine-chlorite CPOs with (100)ol || (100)ch, (010)ol || (001)ch and (001)ol || (010)ch. The fluid percolation that caused the localized metasomatism and partial hydration of the mantle occurred possibly along trans-lithospheric shear zones. The presence of chlorite induces the most important drop on the P-wave velocities and may help to explain some local low velocities in the fore-arc mantle wedges, but is unlikely to be of global importance due to its very high Vp/Vs ratio ~ 1.9. On the other hand, antigorite is the only phase that causes important modification on the propagation directions of P and S-waves, and the only phase to explain the polarization of the fastest shear waves parallel to the subduction trench.
ISSN: 0040-1951

hal-00858061
https://hal.archives-ouvertes.fr/hal-00858061
DOI : 10.1016/j.tecto.2013.03.022

Éditeur(s) : HAL CCSD
Résumé : In coastal carbonate aquifers submitted to a saline intrusion, water - rock interactions processes at the interface between freshwater and saltwater are a cause for heterogeneities development within the porous media. The dissolutions and precipitations induced by the mixing zone play a major role in the transport properties of the reservoir and so in the long term evolution of the saltwater intrusion. The characterization and the in situ observation of a current saline intrusion in the Llucmajor carbonate platform at the experimental site of Ses Sitjoles (South-Easth of Mallorca Island, Spain), allowed to study the temporal evolution of the saltwater intrusion and the biogeochemical processes active in the mixing zone. The influence of microstructure, characterized using X-Ray microtomography, on the petrophysical and flow properties was investigated in laboratory and flow-through experiments were also conducted to study the modifications of the microstructures when submitted to water - rock interactions processes. The mixing zone at the Ses Sitjoles site appears as quite thick and not very sensitive to climate and anthropic stress and is proved to be the locus of active microbiological activity. Laboratory studies highlight a strong control of the microporosity on transport processes and of pCO2 on water - rock interactions. The percolation experiments of slightly reactive waters reveal calcite dissolution together with a decrease in permeability due to a rearrangement of micro-grains within the microporous network.
Les processus d'interactions fluide-roche à l'interface eau douce-eau salée, dans les aquifères carbonatés côtiers soumis à une intrusion saline, sont une des causes du développement d'hétérogénéités dans la structure du milieu poreux. Les dissolutions et/ou précipitations engendrées par la présence de cette zone de mélange jouent un rôle déterminant pour les propriétés de transport du réservoir et donc l'évolution à long terme de l'intrusion d'eau salée. En prenant l'exemple de la plateforme carbonatée de Llucmajor au niveau du site expérimental de Ses Sitjoles (Sud-Est de Majorque, Espagne), un travail de caractérisation et d'observation in situ à moyen terme de l'intrusion saline actuelle de ce réservoir permet de décrire son évolution temporelle et les processus biogéochimiques actifs dans la zone de mélange. L'influence de la microstructure du milieu poreux, caractérisée par microtomographie RX, sur les propriétés pétrophysiques et hydrodynamiques est étudiée en laboratoire et des expériences de percolations d'eaux réactives (mélanges eau douce - eau salée et eau pure chargée en CO2) sont réalisées afin d'étudier les modifications de ces microstructures lorsqu'elles sont soumises à des interactions eau - roche. La zone de mélange eau douce - eau salée rencontrée au niveau du site de Ses Sitjoles est large et peu sensible aux contraintes extérieures (climatologiques et anthropiques) et constitue un lieu d'activité microbiologique particulièrement actif. En laboratoire, on observe un fort contrôle des phénomènes de transport par la microporosité et des processus d'interactions eau - roche par la pCO2. Dans le cas d'une percolation de fluides moyennement réactifs, les expériences mettent en évidence une dissolution de calcite accompagnée par une diminution de la perméabilité, liée à un réarrangement des micro-grains à l'intérieur du réseau microporeux.
https://tel.archives-ouvertes.fr/tel-00767152

tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152/document
https://tel.archives-ouvertes.fr/tel-00767152/file/thesegaring.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ronda peridotite massif in Southern Spain shows a well-defined 'recrystallization' front that separates a large-scale partial melting domain formed at the expense of the continental lithospheric mantle from a 'preserved' lithospheric domain. To investigate the processes allowing a transient lithosphere-asthenosphere boundary to propagate in the lithospheric mantle, we performed a joint petrostructural and geochemical study of an similar to 2.5 km(2) zone extending from the melting front to the mylonites that mark the western limit of the massif. This study emphasizes a feedback between heat transfer, melt percolation, and deformation in the lithospheric mantle. Petrographical observations and geochemical data show that heterogeneous reactive percolation of melts produced in the underlying partial melting domain led to refertilization of lithospheric peridotites up to 1.5 km ahead from the melting front, producing metre-scale layering of fertile and refractory mantle rocks. Within 800 m from the front, pre-existing garnet pyroxenite layers were partially molten and the resulting melts probably contributed to the refertilization process. Detailed structural mapping and analysis of the microstructures and crystal preferred orientations highlight the relations between reactive melt transport and deformation, and the control of the temperature gradient on both processes. Parallelism between the recrystallization front, compositional boundaries, and deformation structures, as well as variations in the deformation intensity of pyroxenes and spinels, suggest syn- to late-tectonic melt transport controlled by both the deformation and the thermal gradient. Variations in the strength of olivine crystal preferred orientations as a function of the modal and chemical composition of the spinel tectonites point to a higher contribution of diffusion to deformation in the most fertile rocks, corroborating the hypothesis that deformation occurred in presence of melt. Finally, the systematic dispersion of olivine [100] and orthopyroxene [001] axes in the foliation plane suggests a dominantly transpressive deformation regime.
ISSN: 0022-3530

hal-00420904
https://hal.archives-ouvertes.fr/hal-00420904
DOI : 10.1093/petrology/egp032

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study reports petrostructural observations in the pargasite and phlogopite-bearing Finero peridotite massif (Italian Western Alps), which suggest that the pervasive foliation in this massif was formed by deformation concomitant with percolation of hydrous Si-rich melts: (1) diffuse contacts, but systematic parallelism between the pyroxenitic layers and the foliation of the peridotite (2) strong shape and crystal preferred orientations (SPO and CPO), but subhedral or interstitial shapes and weak intracrystalline deformation of the hydrous phases, (3) CPO, but interstitial shapes of the pyroxenes, (4) very coarse olivine grain sizes, which are correlated to the olivine abundance, and (5) elongated shapes, but weak intracrystalline deformation, and extremely weak and highly variable CPO of olivine. The pervasive deformation of the Finero peridotite occurred therefore under conditions that allowed coexistence of H2O–CO2-bearing melts, pargasite, and spinel, that is, temperatures of 980–1080 °C and pressures <2 GPa. The petrostructural observations suggest that the presence of hydrous melts results in accommodation of large amounts of deformation by stress-controlled dissolution–precipitation and advective transport of matter by the melts and in fast grain boundary migration in olivine. By consequence, it produces significant rheological weakening. Water contents in olivine are <4 ppm wt., implying limited contribution of hydration of olivine to weakening. In addition, the analysis of protomylonites composing the external domains of the shear zones that overprint the pervasive foliation indicates that the transition to melt-free conditions results in enhanced contribution of dislocation creep to the deformation. The associated increase of the peridotites' strength leads to onset of strain localization. The latter is not correlated to the local abundance in pargasite or phlogopite, implying that crystallization of amphiboles or phlogopite, even at concentrations of 25 vol.%, does not produce rheological weakening in the upper mantle.
ISSN: 0012-821X

hal-01667879
https://hal.archives-ouvertes.fr/hal-01667879
DOI : 10.1016/j.epsl.2017.08.015

Éditeur(s) : HAL CCSD
Résumé : International audience
In real world situations, each person is generally in contact with only a small fraction of the entire population and exchange information through these interactions. Their number and their frequency vary from one to another individual and may be much depending on mobility of individuals. The objective of this article is to better understand how human mobility may have an impact on mobile social networking systems. This should help to answer a question as: "How might an information, a rumor, a pathogen, etc., driven by physical proximity, spread through a population?". We present a first stage of our work in which we focus on percolation processes as information flow mechanisms. We propose a synthetic mobility model and we define an artificial world populated by heterogeneous agents who differ in their mobility. Simulations are conducted on a multi-agent programmable environment. Our experimental results clearly demonstrate positive correlations between agent mobility factors and percolation thresholds.
Procedia CS

hal-00767043
https://hal.archives-ouvertes.fr/hal-00767043
DOI : 10.1016/j.procs.2012.06.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Sapat peridotite in Kohistan (NW Pakistan) is a 12x1 km sized body of meta-harzburgites, dunites, pyroxenites and meta-gabbros in the hanging wall of the Indus Suture Zone. Field relations, micro-textures, bulk and mineral chemistry document melt-rock reactions producing dunites at the expense of meta-harzburgites, and a consecutive olivine-clinopyroxenite formation from the same melt type. The association of mesa-gabbros, dunites, and pyroxenites is interpreted as a crust-mantle transition zone produced by the percolation of highly depleted primitive arc melt. The meta-harzburgites represent large portions of refractoty mantle that have suffered melt extraction and metasomatism prior to their interaction with the dunite-forming primitive arc melt and the establishment of the crust-mantle transition zone. Uncommon vein assemblages in the dunites that include Cr-clinochlore, calcite and olivine document a late percolation of slab-related, volatile-rich fluids. Taking into account the highly refractory composition of the Sapat mantle, its structural position, the evidence for interaction with highly depleted arc melts and the sub-solidus interaction with volatile-rich arc fluids, the Sapat ultramafic rocks are interpreted as being derived from the frontal Kohistan arc, representing a crust-mantle transition formed by arc magmatism.
ISSN: 0024-4937

hal-00424515
https://hal.archives-ouvertes.fr/hal-00424515
DOI : 10.1016/j.lithos.2008.07.004

Éditeur(s) : HAL CCSD
Résumé : IODP Hole U1309D (IODP Exp. 304-305, 30°N) and ODP Site 1275 (ODP Lag 209, 15°45?N) sampled two oceanic core complexes, at the Mid-Atlantic Ridge. The recovered rocks are mostly gabbroic with some very primitive and olivine rich (Ol>70%). In Hole U1309D, trace element compositions of clinopyroxene and plagioclase poikiloblasts from olivine-rich rocks ndicate that they crystallized from the same melt in all lithologies. Olivine trace element compositions are in disequilibrium with the two other minerals. Olivine crystallographic preferred orientations are weak, with a relatively strong uncommon [001] concentration but consistent with deformation by dislocation creep with activation of the high temperature (010) [100] slip system, commonly described in asthenospheric mantle. The joint study of geochemical processes and microstructures in these rocks suggest a complex crystallization history in an open system with percolation of large volume of MORBtype melt and interaction with the depleted shallow mantle. Olivine-rich rocks are interpreted as the ultimate residue of these melt-mantle reaction processes. At Site 1275, the formation of the more evolved rocks of the gabbroic series is not related to the impregnation event creating olivine-rich rocks.
These rocks represent late magmatic injections, which are completely crystallized at depth as intrusivegabbroic bodies. The results presented in this thesis are consistent with the formation of oceanic core complexes associated with relatively strong magmatic activity, and with the crystallization of most of melt in the lithosphere without basaltic counterpart erupted on the seafloor.
Le puits IODP U1309D (Exp. IODP 304-305, 30°N) et le Site ODP 1275 (Leg ODP 209, 15°45'N) ont permis d'échantillonner deux core complexes océaniques de la dorsale Médio-Atlantique. Les roches récupérées sont principalement gabbroïques dont certaines très primitives et riches en olivine (ol >70%). Dans le puits U1309D, les compositions en éléments en trace des poeciloblastes de clinopyroxène et de plagioclase des roches riches en olivine indiquent qu'ils précipitent depuis le même magma dans toutes les lithologies. La composition en éléments en trace des olivines est en déséquilibre avec ces deux minéraux. Les fabriques cristallographiques de l'olivine sont faibles avec une concentration sur [001] inhabituelle, néanmoins compatibles avec une déformation plastique de haute température, avec l'activation du système de glissement (010) [100] communément décrit dans le manteau asthénosphérique. L'étude conjointe des caractéristiques géochimiques et microstructurales de ces roches met en lumière une histoire complexe de cristallisation dans un système ouvert où de larges volumes de magma de type MORB ont percolé et interagi avec le manteau appauvri superficiel. Ces roches riches en olivine représenteraient le résidu ultime de ces réactions liquide-manteau. Au site 1275, la formation des roches les plus évoluées de la série n'apparaît pas liée à l'événement d'imprégnation formant les roches riches en olivine. Ces roches correspondent à des injections tardives de magma qui ont entièrement cristallisé en profondeur sous forme de plutons intrusifs. Les résultats présentés dans ce mémoire sont compatibles avec une formation des core complexes océaniques associée à une activité magmatique relativement importante, et à une cristallisation complète de tout ou partie de ces magmas dans la lithosphère sans contre-partie volcanique en surface.
https://tel.archives-ouvertes.fr/tel-00354807

tel-00354807
https://tel.archives-ouvertes.fr/tel-00354807
https://tel.archives-ouvertes.fr/tel-00354807/document
https://tel.archives-ouvertes.fr/tel-00354807/file/these_MD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A suite of eclogite xenoliths from the Roberts Victor kimberlite (South Africa) is remarkable for its high abundances of base metal sulfides (BMS; up to 2 modal %). However, while sulfides are nearly ubiquitous in Type I eclogites (garnet > 0.07% Na2O), Type II eclogites (garnet < 0.07% Na2O) systematically lack sulfides. Two different sulfide assemblages are recognised within the Type I xenolith suite. Both populations are polyphase Cu-Ni-Fe sulfides, one characterised by the pyrrhotite (Po) + pentlandite (Pn) + chalcopyrite (Cp) assemblage and the other by the smythite/violarite (Smy/Vi) + (Ni)pyrite (Py) + Cp assemblage. The latter is the most abundant assemblage and reflects the supergene alteration of the "primary" Po + Pn + Cp assemblage. This process overprints the original composition of the sulfides by remobilising elements such as S, Fe, Ni, Se and Te. In the Type I eclogites, BMS occur as inclusions within silicates (garnet and clinopyroxene) and as interstitial grains. No chemical differences were observed between enclosed and interstitial sulfides. However, their relative abundances are correlated, indicating a similar origin. The Po + Pn + Cp assemblage is identical to eclogitic sulfides previously described in some Roberts Victor diamonds. Silicate-enclosed sulfides could appear to be early phases, but they are restricted to the outer parts of the silicate grains, suggesting a late incorporation during partial recrystallisation of silicate phases, induced by fluid-rock percolation-reaction during a metasomatic event. Positive whole-rock correlations between Se and (La/Sm)N⁎ and between Cu and ΣLREEN⁎ indicate a direct link between sulfide content and the enrichment of Mg + incompatible elements in the Type I eclogites, further supporting a metasomatic origin of the sulfide component. Similarly, a negative correlation between ΣLREEN⁎ and Cucpx implies that the metasomatic agent was at least partially composed of S-rich fluid (e.g. H2S, SO2) that reacted with the rock and leached Cu out of the silicates. The coupling between sulfides and LREE in the Type I eclogites, as well as the absence of sulfides and metasomatic features (e.g. unequilibrated grain boundaries, melt pockets, fluid inclusions, phlogopite) in the Type II eclogites, demonstrate that Type II eclogites did not undergo such a metasomatic event and therefore may represent the less-modified protoliths of Type I eclogites.
ISSN: 0009-2541

hal-00903856
https://hal.archives-ouvertes.fr/hal-00903856
DOI : 10.1016/j.chemgeo.2013.06.015

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
Abstract View references (60)Here we show the long term performance at high temperatures of a multi-tube module containing 8 membranes in 4 parallel lines with a total of 545 cm 2 area. The membranes were prepared via thin film dip coating of cobalt oxide silica (CoO xSi) sol-gel on tubular alumina supports. A preliminary study found that the sol-gel containing 20 mol% cobalt oxide formed the best microporous structure with the highest surface area and pore volume. All resulting membranes delivered permeances of ∼1 × 10 -7 mol m -2 s -1 Pa -1 at 500 °C, indicating a high repeatability for the membrane fabrication process. The permselectivities of helium (He) and hydrogen (H 2) over carbon dioxide (CO 2) and nitrogen (N 2) increased from 10-20 at 100 °C to values close to 1000 at 500 °C. Additionally, the apparent energies of activation (E act) for the smaller kinetic diameter gases He and H 2 at 12.2 and 19.5 kJ mol -1 were high and contrary to the negative values for larger gases N 2 and CO 2 at -1.8 and -7.4 kJ mol -1. These remarkable results were attributed to the molecular sieving mechanism of the microporous silica which was enhanced by the embedding of cobalt oxide into the matrix, delivering structural control with an average pore size of 3 Å. The E act for H 2 permeance was higher than that of He, indicating that the cobalt oxide played an important role in H 2 transport. Two membrane lines performed exceptionally well for binary gas mixture processing with H 2 purity reaching values close to 100% in the permeate stream for argon (Ar) concentrations of up to 80% in the retentate stream. A major finding here is that the binary gas selectivity was independent of temperature, contrary to the permselectivity observed for single gas permeance. Further, the H 2 flow rate was greatly affected by the concentration of Ar in the mixture, while the temperature dependency played only a marginal role. In particular, competitive adsorption in the percolative pathways containing pore constrictions or bottlenecks of the anisotropic CoO xSi matrix allowed Ar to impede H 2 diffusion. Finally, the CoO xSi membranes proved thermally stable and robust for 2000 h of testing for various thermal cycles up to 500 °C. © The Royal Society of Chemistry 2012.
Energy & Environmental Science

hal-01683199
https://hal.univ-antilles.fr/hal-01683199
DOI : 10.1039/c2ee03247c

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Despite decades of petrological and geochemical studies, the nature and setting of obducted ophiolites remain controversial: the influence of supra-subduction zone environments on pre-existing oceanic lithosphere is yet to assess, and the processes leading to subduction/obduction initiation are still poorly constrained. Our study documents successive influx of slab-derived fluids and progressive strain localization within the upper mantle in a supra-subduction environment during the first few My of the subduction history. We focus on strongly sheared mafic amphibolites intruding peridotites near the mantle–crust transition of the New Caledonia obducted ophiolite and ~ 50 to 100 m above the basal thrust contact of the ophiolite. These m- to hm-long and several m-thick shear bands are interpreted as inherited small-scale intrusions of mafic melts, probably dikes or sills, which were derived from a moderately refractory mantle source refertilized by supra-subduction zone fluids. 40Ar/39Ar age constraints on pargasite at ca. 90 Ma suggest that they could be inherited from the former Pacific west-dipping subduction.Secondary deformation of these mafic intrusions is intimately associated to three major stages of fluid infiltration: (1) the first stage of deformation and metasomatism is marked by syn-kinematic growth of Ca-amphibole (at 700–800 °C and 3–5 kbar) with a distinctive supra-subduction zone signature, and controlled later channelization of aqueous fluids. 40Ar/39Ar dating on magnesio-hornblende indicates that this deformation episode occurred at ca. 55 Ma, coincident with east-dipping subduction initiation; (2) the main metasomatic stage, characterized by the development of a phlogopite-rich matrix wrapping peridotites and amphibolite boudins, points to the percolation of alkali-rich aqueous fluids at still high temperature (650–750 °C); (3) the last, low temperature (< 600 °C) metasomatic stage results in the formation of deformed veinlets containing talc, chlorite and serpentine.
ISSN: 0024-4937

hal-01306664
https://hal.archives-ouvertes.fr/hal-01306664
https://hal.archives-ouvertes.fr/hal-01306664/document
https://hal.archives-ouvertes.fr/hal-01306664/file/Soret_2016_Strain_localization.pdf
DOI : 10.1016/j.lithos.2015.11.022

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Despite a relatively 'uniform' fertile composition (Al2O3 = 2 center dot 19-4 center dot 47 wt %; Fo% = 89 center dot 2 +/- 0 center dot 3%; Cr#(Spl) = 8 center dot 9 +/- 1 center dot 5%), the Montferrier peridotite xenoliths show a wide range of S contents (22-590 ppm). Most sulphides are interstitial and show peculiar pyrrhotite-pentlandite intergrowths and low abundances of Cu-rich phases. Sulphide-rich samples are characterized by strong enrichment in the light rare earth elements and large ion lithophile elements without concomitant enrichment of the high field strength elements. Such trace-element fractionation is commonly ascribed to metasomatism by volatile-rich melts and/or carbonatitic melts. S and Se (11-67 ppb), as well as S/Se (up to approximate to 12 000), are correlated with La/Sm. Cu, however, remains broadly constant (30 +/- 5 ppm). These features strongly suggest that the percolation-reaction of such volatile-rich fluids has led to sulphide enrichment with an atypical signature marked by strong fractionation of the chalcophile elements (i.e. S vs Se and Cu). S-rich xenoliths are also characterized by high (Pd/Ir)(N) (1 center dot 2-1 center dot 9; where subscript N indicates normalized to chondrite), (Pd/Pt)(N) between 1 center dot 5 and 2 center dot 2, and (Os/Ir)(N) up to 1 center dot 85. Despite the relative uniform fertile composition of the xenoliths, Re/Os ranges between 0 center dot 02 and 0 center dot 18. Os-187/Os-188 is extremely variable even within a single sample and can be as high as 0 center dot 1756 for the most S-rich samples. Sulphides show highly fractionated and variable abundances of the highly siderophile elements (HSE) [0 center dot 03 (Pd/Ir)(N) < 1283] and Re-Os isotopic composition (0 center dot 115 < Os-187/Os-188 < 0 center dot 172). Such variation can be observed at the thin-section scale. Whole-rock and in situ sulphide data demonstrate that chalcophile and HSE systematics and the Os isotopic composition of the upper mantle could be significantly modified through metasomatism, even with volatile-rich fluids. These features highlight the complex behaviour of the HSE in fluid-rock percolation-reaction models and suggest a complex interplay between sulphide addition (crystallization or sulphidation) and partial equilibration of pre-existing sulphide. The specific fractionations observed in chemical proxies such as S and Se, Os and Ir, and Pd and Pt, as well as the low abundance of Cu-rich sulphides, suggest that sulphide addition may not have occurred via sulphide melts. Rather, we infer that S was present as a dissolved species in a (supercritical) oxidizing, volatile-rich fluid (C-O-H-S +/- Cl) along with other chalcophile and siderophile elements such as Os, Pd, Re and Au. The highly radiogenic Os composition of this fluid ( Os-187/ Os-188 > 0 center dot 17) would imply that such fluids are derived from an uncommon type of mantle source possibly related to carbonatite melts.
ISSN: 0022-3530

hal-00644524
https://hal.archives-ouvertes.fr/hal-00644524
DOI : 10.1093/petrology/egr038

Éditeur(s) : HAL CCSD
Résumé : The main purpose of this thesis was to characterize and to model the hydrodynamic and thermochemical processes leading to the alteration of the wellbore cement materials under borehole conditions. Percolation experiments were performed on fractured cement samples under CO2 storage conditions (60°C and 10MPa). Injection flow rate was dictated by the fracture aperture of each sample. CO2 enriched brine was flowed along the fracture aperture, and permeability changes as well as chemical evolution of major cations were continuously acquired during the experiment time. Reaction paths developed by the alteration of the cement were characterized using microtomography and ESEM images. The experiments conducted using samples presenting large fracture apertures during 5h showed that permeability was maintained constant during the experiment time. Three reacted layers were displaying by the alteration of portlandite and CSH. Long term experiment (26h) conducted with large initial fracture aperture showed a decrease of the permeability after 15hours of CO2 exposure. Otherwise, experiments performed on samples presenting narrow apertures indicated the conversion of portlandite and CSH to calcite leading to the permeability reduction and the fracture clogging. Assemblages of phases and chemical changes were modelled using GEMS-PSI speciation code. We studied also using a coupled transport-reactive model the conditions leading to the cement alteration and the formation of associated layers.
L'objectif de cette thèse était de modéliser à partir des expériences de percolation-réactive, les processus hydrodynamique et réactionnel qui gouvernent l'altération des ciments de puits. Différentes expériences ont été réalisées dans des conditions représentatives de celles du stockage du CO2. Des échantillons fracturés ont été utilisés pour injecter une saumure enrichie en CO2 à 60°C et 10MPa et à différentes pressions partielles de CO2. Le débitd'injection variait en fonction des propriétés hydrauliques de l'échantillon exposé. L'injection d'une saumure enrichie en CO2 à débit constant à travers une fracture supposée plane a permis d'étudier les modifications des propriétés hydrodynamiques et ces conséquences sur la géochimie et la microstructure du ciment altéré. L'impact dynamique de l'évolution microstructurale a été mis en évidence. Les expériences conduites sur des échantillons présentant de larges ouvertures, réalisées sur une durée de 5 h, ont montré que la perméabilité était maintenue constante le long de l'expérience. Trois couches d'altération se sont développées consécutivement à la dissolution de la portlandite et la décalcification des CSH. L'altération a entrainé la précipitation des carbonates et de la silice amorphe à proximité de la fracture. Dans le cas d'une expérience longue durée appliquant les mêmes conditions que précédemment on a observé que la croissance de la silice amorphe a entrainé la diminution de la perméabilité. Par ailleurs les expériences effectuées sur des échantillons présentant de faibles ouvertures, ont indiqué que la conversion de la portlandite en calcite conduit au colmatage de la fracture. L'évolution des assemblages de phases conduisant à la formation des carbonates et de la silice amorphe a été modélisée à partir du code géochimique GEMS. Les mécanismes de diffusion et les processus de mise en place des couches d'altération ont été étudiés à partir d'un modèle analytique et d'un modèle de transport réactif à partir du code géochimique PHREEQC.
https://tel.archives-ouvertes.fr/tel-01038034

tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034/document
https://tel.archives-ouvertes.fr/tel-01038034/file/theseabdoulghafour.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Erro-Tobbio peridotites (Voltri Massif, Ligurian Alps) represent subcontinental lithospheric mantle tectonically exhumed during Permo-Mesozoic extension of the Europe-Adria lithosphere. Previous studies have shown that exhumation started during Permian times, and occurred along kilometer-scale lithospheric shear zones which enhanced progressive deformation and recrystallization from spinel- to plagioclase-facies conditions. Ongoing field and petrologic investigations have revealed that the peridotites experienced, during uplift, a composite history of diffuse melt migration and multiple episodes of ultramafic-mafic intrusions. In this paper we present the results of field, structural and petrologic-geochemical investigations into a sector of the Erro-Tobbio peridotite unit that preserves well this multiple intrusion history. Melt impregnation in the peridotites is evidenced by significant plagioclase enrichment and crystallization of unstrained orthopyroxene replacing kinked mantle olivine and clinopyroxene; impregnating melts were thus opx-saturated. Melt-rock interaction caused chemical changes in mantle minerals (e.g. Al decrease and REE increase in cpx; Ti and Cr# enrichment in spinel). Nevertheless, clinopyroxenes still exhibit LREE depletion (Ce;N;/Sm;N; = 0.006-0.011), indicating a depleted signature for the percolating melts. Melt impregnation was thus related to diffuse porous flow migration of depleted MORB-type melt fractions that modified their compositions towards opx saturation by mantle-melt interaction during ascent. The impregnated peridotites are intruded by a hectometer-scale stratified cumulate body, mostly consisting of troctolites and plagioclase wehrlites, showing gradational, interfingered contacts with the host mantle rocks. Subsequent intrusion events are revealed by the occurrence of olivine gabbros as decameter-wide lenses, variably thick (centimeter- to meter-scale) dykes and thin dykelets, which crosscut both the peridotite foliation and the magmatic layering in the cumulates. Overall, major and trace element compositions of minerals in the intrusives indicate that they represent variably differentiated cumulus products crystallized from rather primitive N-MORB-type aggregated melts. Slightly more evolved compositions are shown by olivine gabbros, relative to the troctolites and plagioclase wehrlites of the cumulate body. Mineral chemistry features (e.g. the Fo-An correlation and high Na, Ti, Mg# in cpx) indicate that the studied intrusive rocks crystallized at moderate pressure conditions (3-5 kbar, i.e. 9-15 km depth). Our study thus points to a progressive transition from porous flow melt migration to emplacement of magmas in fractures, presumably related to progressive change of lithospheric mantle rheology during extension-related uplift and cooling.
ISSN: 0024-4937

hal-00407669
https://hal.archives-ouvertes.fr/hal-00407669
DOI : 10.1016/j.lithos.2006.06.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We studied the deformation in a partially molten mantle through detailed petrostructural analysis of plagioclase lherzolites from the northwestern part of the central Lanzo massif. These peridotites display a pervasive anastomosed network of millimetre to centimetre-scale plagioclase-rich bands, which grades locally into a planar layering marked by an intercalation of plagioclase-rich and olivine-rich layers up to tens of centimetres wide. Both the anastomosed and the planar layering are subparallel to the deformation fabric, characterized by a foliation defined by the shape-preferred orientation of olivine and by crystal preferred orientation (CPO) of olivine, orthopyroxene, and clinopyroxene. This parallelism, the coexistence of microstructural evidence for melt-rock reactions and for deformation by dislocation creep, and the predominance of axial-[010] olivine CPO patterns, characterized by [010] axes clustered normal to the layering, indicate that deformation and the reactive melt percolation that formed the layering were coeval. Strong heterogeneity in mineral composition in the planar layering domains, with Fe-enrichment in olivine and spinel and highly variable Ti content in spinel in cm-scale plagioclase-rich bands, implies that the latter interacted with higher melt volumes. High Ti contents in pyroxenes and spinel in the anastomosed layering domains point to changes in melt composition, hinting to less effective melt transport. We propose therefore that the planar layering records melt segregation in layers parallel to the shear plane, whereas the anastomosed layering results from melt alignment along grain boundaries subparallel to the shear plane, without segregation. Finite strain in the different layers cannot be quantified, but comparison of the present observations with data from experiments and from other mantle outcrops displaying shear-controlled melt organization suggests that the transition from the anastomosed to the planar layering might record an increase in finite strain, that is, strain localization associated with variations in the instantaneous melt fraction.
ISSN: 0040-1951

hal-01053509
https://hal.archives-ouvertes.fr/hal-01053509
DOI : 10.1016/j.tecto.2014.01.007

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The paper is motivated by the long term safety analysis of the CO 2 geological storage. We present a methodology for the assessment of the ge-omechanical impact of progressive rock dissolution. The method is based on the use of X-ray tomography and the numerical dissolution technique. The influence of evolution of the microstructure on the macroscopic properties of the rock is analysed by using periodic homogenization method. The numerical computations show progressive degradation of all components of the stiffness (orthotropic) tensor. Moreover, the evolution of associated mass transfer properties (as tortuosity and conductivity tensors), by using the periodic homogenization method, is also calculated. The correlation between the mechanical parameters and the transfer properties during the dissolution pro-cess is presented. The results show that the highest increase of the hydraulic conductivity (in direction Y) is not associated with the highest decrease of Young modulus in this direction. Moreover, the highest decrease of Young modulus (in the direction X) is not associated with percolation in this direction. Finally, an incremental law to calculate settlement, in case of a rock with evolving microstructure, is proposed. The solution of the macroscopic settlement problem under constant stress and drained conditions showed that the geomechanical effects of the rock dissolution are rather limited.
ISSN: 0363-9061

hal-01104204
https://hal.archives-ouvertes.fr/hal-01104204
https://hal.archives-ouvertes.fr/hal-01104204/document
https://hal.archives-ouvertes.fr/hal-01104204/file/Numerical_computations_rock_dissolution_Wojtacki_al_2014.pdf
DOI : 10.1002/nag.2316