Résumé : When Henry B. Plant brought the railroad to Tampa in 1884, he opened the door for many businesses to locate and flourish here. The railroad was at the center of the city's economy. From downtown it went to Port Tampa where one could board a Plant steamship to Jamaica, Cuba, New Orleans, Bermuda or other destinations. A spur of the rail line brought the train up to the west front of the hotel so guests could depart the train and walk directly into the lobby. The Tampa Bay Hotel cost approximately 2.5 million dollars to build and $500,000 to furnish. Consisting of 511 rooms, some of which were suites of 3-7 rooms, it provided a degree of luxury never before seen in Tampa. Most of the rooms had their own baths and all had electricity and telephones. In addition, guests were surrounded by a varied collection of furniture, porcelains, Venetian-style mirrors, and sculptures gathered by Mr. and Mrs. Plant in their travels in Europe. The Tampa Bay Hotel opened in 1891 amid wide fanfare and celebration. Henry Plant's dream was now a reality. The newspapers of the day described it as "brightly illuminated, filled with sumptuous decorations, thrilling music and graced with turrets, domes and minarets towering heavenward and glistening in the sun." It was a Victorian palace. The hotel was a lively place with balls, tea parties, and organized hunts during the winter social season. It was open seasonally from December to April in the 1890's. Once a guest arrived at the hotel, he needed to be entertained. Guests went wild game hunting as well as fresh and salt-water fishing. Water sports were also included like sailing, rowing, and canoeing. For the less adventuresome, there were bicycles, carriages, and rickshaws to ride you around the property. The hotel also offered golf, tennis, shuffleboard, billiards, and even a racetrack.
(Funding) Funded in part by the Institute for Museum and Library Services (IMLS), Ephemeral Cities Project.
Tampa |z 1271000 |2 ceeus
Hillsborough County |z 12057 |2 ceeus
United States of America -- Florida -- Hillsborough County -- Tampa

Droits : All rights reserved. 2005.

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : A differential effective medium (DEM) model is used to predict elastic properties for a set of porous and anisotropic aggregates, comprised of mixtures of calcite and muscovite. The DEM takes into consideration an anisotropic background medium with triclinic or higher symmetry, in which inclusions of idealized ellipsoidal shape are added incrementally. In general, the calculated elastic properties of a solid that contains inclusions representing "dry" pores/cracks are strongly dependent on the orientation and aspect ratio of the inclusions. Aspect ratios of inclusions in the synthetic aggregates, which consist of air-filled pores, are estimated from anisotropy of magnetic susceptibility (AMS) of samples whose pore space has been impregnated with a colloidal ferrofluid. The AMS derived pore shape geometry is used as an input value for inclusions in the DEM. Modeling results are compared with laboratory determined elastic properties, measured with ultrasonic waves. Calculated shear wave velocities agree in general well with laboratory measured S wave velocities, whereas calculated P wave velocities are typically 0.5-1.1 km/s higher than measured values. Differences between calculated and measured P wave velocities are attributed mainly to incomplete and biased ferrofluid saturation of pores. Spherical pores are preferably filled during imbibition, in comparison to thin cracks, which leads to overprediction of the calculated P wave velocities. The amount of ferrofluid that fills the pore space is dependent on the ratio of calcite to muscovite and the load used for compaction during sample synthesis. The permeability decreases with increasing muscovite content and increasing compaction load. Incomplete saturation of samples with high-muscovite content is confirmed by X-ray microtomography density contrast imaging of dry and ferrofluid saturated specimens.
ISSN: 0148-0227

hal-00617717
https://hal.archives-ouvertes.fr/hal-00617717
DOI : 10.1029/2010JB007750

Éditeur(s) : Wiley-blackwell Publishing, Inc
Résumé : Vibrio splendidus, strain LGP32, is an oyster pathogen associated with the summer mortalities affecting the production of Crassostrea gigas oysters worldwide. Vibrio splendidus LGP32 was shown to resist to up to 10 mu M Cg-Def defensin and Cg-BPI bactericidal permeability increasing protein, two antimicrobial peptides/proteins (AMPs) involved in C. gigas immunity. The resistance to both oyster Cg-Def and Cg-BPI and standard AMPs (polymyxin B, protegrin, human BPI) was dependent on the ompU gene. Indeed, upon ompU inactivation, minimal bactericidal concentrations decreased by up to fourfold. AMP resistance was restored upon ectopic expression of ompU. The susceptibility of bacterial membranes to AMP-induced damages was independent of the ompU-mediated AMP resistance. Besides its role in AMP resistance, ompU proved to be essential for the adherence of V. splendidus LGP32 to fibronectin. Interestingly, in vivo, ompU was identified as a major determinant of V. spiendidus pathogenicity in oyster experimental infections. Indeed, the V. splendidus-induced oyster mortalities dropped from 56% to 11% upon ompU mutation (Kaplan Meier survival curves, P < 0.01). Moreover, in co-infection assays, the ompU mutant was out competed by the wild-type strain with competitive indexes in the range of 0.1-0.2. From this study, ompU is required for virulence of V. splendidus. Contributing to AMP resistance, conferring adhesive properties to V. splendidus, and being essential for in vivo fitness, the OmpU porin appears as an essential effector of the C. gigas/V. splendidus interaction.
Environmental Microbiology (1462-2912) (Wiley-blackwell Publishing, Inc), 2010-04 , Vol. 12 , N. 4 , P. 951-963

Droits : 2010 Society for Applied Microbiology and Blackwell Publishing Ltd
http://archimer.ifremer.fr/doc/00003/11421/8044.pdf
DOI:10.1111/j.1462-2920.2009.02138.x
http://archimer.ifremer.fr/doc/00003/11421/

Éditeur(s) : Elsevier
Résumé : Phosphorus forms with respect to sediment characteristics, such as grain-size, and major chemical elements, were studied in French coastal marine areas (the Bay of Seine and the Loire and Gironde Estuaries).In the three areas, Fe/Al-bound phosphate (Fe/Al-P) and exchangeable phosphate (exch-P) were significantly related to the proportion of fine fraction (< 63 mum). The special association of these forms with fine particles, as well as the relationships between exch-P, Fe/Al-P and Fe showed that adsorption processes on Fe oxides had taken place. However, for similar Fe concentrations, Bay of Seine sediments showed Fe/Al-P concentrations which were four to five times higher than those found in the Loire and Gironde Estuaries. This was attributed to differences in sediment nature and processes in these two types of areas. Indeed, the Loire and Gironde Estuaries frequently show hypoxia.Calcium-bound phosphate (Ca-P) was found in all grain size classes with comparable concentrations in the Bay of Seine where there was no correlation between Ca-P and Ca. This corresponded to the calcium's marine origin (shells) in the Bay of Seine. In contrast, the correlation of Ca-P with Ca and the fine fraction of the sediment in the Loire and Gironde Estuaries was characteristic of the predominant metamorphic origin of Ca-P in these areas.Useful information for interpretation of P-forms can be obtained from major sediment characteristics. Thus, for areas where specific relationships have previously been established good estimates of P-forms could be predicted from sediment properties.
Estuarine, Coastal and Shelf Science (0272-7714) (Elsevier), 2001-05 , Vol. 52 , N. 5 , P. 617-629

Droits : 2001 Academic Press. All rights reserved
http://archimer.ifremer.fr/doc/2001/publication-469.pdf
DOI:10.1006/ecss.2001.0766
http://archimer.ifremer.fr/doc/00000/469/

Éditeur(s) : HAL CCSD
Résumé : Geothermal energy is considered as a green and infinite energy source at human scale. Currently, the yield of geothermal power plants is limited to temperatures of the operating fluid which 350 °C. From tectonic and volcanic activity at mid-ocean ridges, Iceland is a location where supercritical fluid extraction (T> 375 °C) can considered for the near future. Exploiting such fluids could theoretically multiply by a factor of ten the electrical power delivered by geothermal wells. Can such fluids circulate at the base of brittle oceanic crust? This work investigates the petrophysical properties of basalts in order to constrain geophysical observations in Iceland and predict the behavior of very high temperature geo-hydrothermal reservoirs. The first approach consisted in studying the physical properties of rocks that have hosted deep hydrothermal circulations at oceanic ridges. The study of these rocks at ODP Site 1256 shows that the porosity measured both in the field and in the lab is associated with amphibolite facies alteration minerals (T> 500 ° C). The second approach was to recreate in the laboratory the conditions of pressure, temperature and pore fluid pressure of high temperature to supercritical hydrothermal systems to predict the mechanical and electrical properties of basalts under these conditions. The mechanical results indicate that the brittle/ductile transition occurs at a temperature of about 550° C, where a strong permeability decrease is expected. The implementation and calibration of a new cell for measuring electrical conductivity at high temperature provide the first results for the interpretation of geophysical data. When applied to basaltic crustal conditions in Iceland, these results indicate that hydrothermal fluids could circulate, at least temporarily, in a supercritical state up to 5 km depth.
La géothermie est considérée comme une source d'énergie propre et inépuisable à échelle humaine. Actuellement, le rendement des centrales géothermiques est limité à l'exploitation de fluides de températures inférieures à 350 °C. L'association de l'activité tectonique et volcanique aux dorsales océaniques fait de l'Islande un lieu où l'extraction de fluides supercritiques (T> 375 °C) peut être envisagée. Cette exploitation pourrait multiplier par dix la puissance électrique délivrée par le système géothermal. Ces fluides peuvent-ils circuler dans la croûte océanique ? Ce travail propose de contraindre les observations géophysiques et de prédire le fonctionnement des réservoirs géo-hydrothermaux de très haute température par l'étude des propriétés physiques des basaltes. La première approche est focalisée sur l'étude de roches ayant accueilli une circulation hydrothermale par le passé. L'étude de ces roches au site ODP 1256, montre que leur porosité est associée à la présence de minéraux d'altération hydrothermale du facies amphibolite (T> 500 °C). La seconde approche a consisté à recréer, en laboratoire, les conditions des systèmes hydrothermaux, à très haute température, afin de prédire les propriétés mécaniques et électriques des basaltes dans ces conditions. Les résultats mécaniques indiquent que la transition fragile/ductile, souvent associée à une forte décroissance de perméabilité, intervient à une température d'environ 550 °C. La mise en place d'une cellule de mesure de la conductivité électrique de haute température a fourni les premiers résultats utiles à l'analyse des données géophysiques. Appliqués aux conditions de la croûte basaltique Islandaise, ces résultats indiquent que des fluides hydrothermaux pourraient circuler au moins transitoirement à l'état supercritique jusqu'à ~ 5 km de profondeur.
https://tel.archives-ouvertes.fr/tel-00591798

tel-00591798
https://tel.archives-ouvertes.fr/tel-00591798
https://tel.archives-ouvertes.fr/tel-00591798/document
https://tel.archives-ouvertes.fr/tel-00591798/file/THESE_MV_pro.pdf

Éditeur(s) : Gauthier-Villars
Résumé : The variability of ''yellow substance'' in waters of the Skagerrak and the Kattegat was studied during the international Skagex programme in 1990 and 1991. Data on attenuation of light and fluorescence of dissolved organic matter (DOM) in sea water were collected with a spectral transmissiometer and a submersible fluorometer within a depth range of 0-250 m at several stations. More than fifty-fold variations of fluorescence intensity over space and time were due to the combined action of different sources of DOM in the straits. The surface maximum of fluorescing DOM, related to river outflow, was spreading from Oslo fjord to the central Skagerrak in late spring. This maximum may be ecologically important because it diminishes shortwave PAR. In the autumn the brightest DOM fluorescence was found in the Kattegat and along the Norwegian coast in accordance with earlier studies. The local minima of DOM fluorescence are associated with the Jutland current. Both the instability of the current and a ten-fold difference in DOM content between deep layers of the Skagerrak and Kattegat resulted in strong synoptic variability of fluorescence in the transitional area between the straits. Seasonal and synoptic variabilities of ''yellow substance'' were minimal in the southern Kattegat. The vertical gradients of DOM fluorescence were mostly negative at the depth of the thermocline of the open Skagerrak in spring, reaching values of 40-50 % m-1. Fine structure and complex shape were inherent to fluorescence profiles from areas of intensive water mixing. DOM fluorescence closely covaried with attenuation of UV light: the correlation coefficient was + 0.9 for wavelength w <= 350 nm regardless of season. The inverse dependence between wavelength derivative and magnitude of UV attenuation in the straits did not change with season. DOM fluorescence and water salinity were negatively correlated at depths of 25-50 m but they varied independently in the upper 10 m. No significant correlation between fluorescence and nitrates has been found. Estimates of correlation with phosphates ranged from 0.7 to 0.8. In general, the changes of fluorescence were due to variations of DOM content in sea water but not to variability of DOM composition or state. The properties of DOM fluorescence in the Skagerrak-Kattegat area make it a useful natural tracer of water movements suitable for active remote sensing with airborne lidar.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1993 , Vol. 16 , N. 2 , P. 115-125

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00099/21041/18667.pdf
http://archimer.ifremer.fr/doc/00099/21041/

Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Description : Pour la formalisation du lexique et de la grammaire de dialectes étroitement apparentés, il peut se révéler utile de factoriser une partie du travail de modélisation. Les soussystèmes linguistiques isomorphes dans les différents dialectes peuvent alors faire l'objet d'une description commune, les différences étant spécifiées par ailleurs. Cette démarche aboutit à un modèle de grammaire à couches : le noyau est commun à la famille de dialectes, et une couche superficielle détermine les caractéristiques de chacun. Nous appliquons ce procédé à la famille des langues créoles à base lexicale française de l'aire américano-caraïbe.

Droits : Ce document est protégé par le droit d'auteur. Il ne peut en aucun cas être utilisé sans l'autorisation de l'auteur et des ayant droits
Provenance : Université des Antilles et de la Guyane. Service commun de la documentation
Permalien : http://www.manioc.org/recherch/HASH0177c3f56b04eebb1ecda993
HASH0177c3f56b04eebb1ecda993

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To quantify the relationships between anisotropy. S-wave splitting and tectonics, we determined the seismic properties of lower-crustal and upper-mantle rocks outcropping in the lvrea Zone (Northem Italy). We obtained P-and S-wave seismic velocities by laboratory direct velocity measurements and/or by calculations based on the modal compositions of the rocks, the lattice preferred orientations (LPOs), and the single crystal stiffness coefficients. Measured P-and S-wave velocities (6.0-7 .5 km s-1 and 3.6-4.2 km s-1) are typical of the lower crust. The P-wave anisotropy is in the range 0-l 0%. Shear-wave birefringence is in the range 0.0-0.6 km s-1 , with typical values between 0.0 and 0.2 km s-1 • In many cases, the birefringence is clearly related to fabric elements (foliation, lineation). Mafic rocks such as anorthosite or pyroxene-bearing gabbros exhibit low P-wave anisotropies (< 5%) and low shear-wave birefringences (less than 0.1 km s-1). In contrast, the seismic properties of felsic rocks such as biotite-bearing gneisses and mafic rocks such as amphibolites display high V P anisotropy (10%) and strong birefringence (0.3 km s-1). Biotite and amphibole preferred orientations clearly control seismic anisotropy and particularly shear-wave splitting. In these rocks, maximum splitting is observed in directions parallel to the foliation with the fast split shear wave polarized parallel to the foliation plane. To have an overview of the seismic properties of this lower-crustal section at a broader scale, we calculated from our data the anisotropie seismic properties of several hypothetical samples that are perhaps more representative of the regional anisotropy than each sample individually. For instance, the average lower-crustal sample displays an anisotropy of 5.5% for P waves and a birefringence around 0.14 km s I for S waves propagating parallel to the foliation. We observe little splitting for waves propagating at high angle to the foliation.
ISSN: 0031-9201

hal-01389712
http://hal.univ-reunion.fr/hal-01389712
http://hal.univ-reunion.fr/hal-01389712/document
http://hal.univ-reunion.fr/hal-01389712/file/Barruol_Kern-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03124-3

Résumé : The slides were taken on collecting trips sponsored by the William L. Bryant Foundation, where books, music and art indigenous to the regions were gathered. The are organized by geographical location.
The town of Bath is located in the John Crow Mountains in Saint Thomas, Jamaica. Mineral springs flow from the rocks and are piped into the bath house, pictured, where the cold and hot waters of the springs are mixed together. The water’s high mineral (sulfur and lime) content is believed to have medicinal properties. The bath has been officially known as the Bath of the Saint Thomas the Apostle. Bath Fountain Hotel and Spa is run by the Jamaican Ministry of Tourism. In front of the building are many automobiles including a taxi. Along the stream, pictured, are dasheens (taros), ferns, palms, and other trees. Slide labeled Jam. St. Thomas min bath at Bath (SE).
Jamaica -- Caribbean region -- Bath, Saint Thomas

Droits : All rights to images are held by the respective holding institution. This image is posted publicly for non-profit educational uses, excluding printed publication. For permission to reproduce images and/or for copyright information contact Special Collections & University Archives, University of Central Florida Libraries, Orlando, FL 32816 phone (407) 823-2576, email: speccoll@mail.ucf.edu
CFM1972_01a
http://ufdc.ufl.edu/AA00030895/00001

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either “artificially”, or by natural extractives.
Wood Science and Technology

hal-01096868
https://hal-agroparistech.archives-ouvertes.fr/hal-01096868
DOI : 10.1007/S00226-010-0393-8

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This special issue in honour of the late Olivier Jaoul brings together contributions from experimental and theoretical mineralogy, the area of most of Olivier's own work, focused for the most part on the Earth's mantle. The volume is divided into three sections; diffusion, deformation and seismic properties. New technological developments have often had a strong impact on research in this area, as again shown by Olivier's constant search to improve the resolution of the short diffusion profiles typical of major cations in mantle silicates. In the section on diffusion the impact of improved computer performance for modelling diffusion and point defect configurations on one hand, and high pressure experimental techniques on the other hand, highlight the continued development in this area. The section on deformation deals with wide range of subjects, including the deformation of olivine and quartz and the relation between deformation and diffusion, both subjects close to Olivier's personal interests. This illustrates the new possibilities to undertake deformation experiments at mantle pressures and temperatures, as well as improvement in high-fidelity viscoelastic measurements at high temperature. In the last section on seismic properties we discover theoretical developments on predicting properties near the Earth's surface and a new experimental application, which allows the determination of sound velocity at very high pressures with implications for the Earth's inner core.
ISSN: 0031-9201

hal-00475657
https://hal.archives-ouvertes.fr/hal-00475657
DOI : 10.1016/j.pepi.2008.09.009

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD Elsevier
Résumé : Understanding the pattern in spatial distribution of soil microbial processes is critical to understand the environmental factors that regulate them as well as to scale up these processes to ecosystem. Soil samples from a I ha tropical rainforest plot (Paracou, French Guiana) were analyzed according a nested sampling approach using different separation distances ranging from 0.4 to 40 m. The variability of substrate induced respiration (SIR) and of denitrification enzyme activity (DEA) was characterized in relation to various soil properties (total C and N contents, NIRS related index of soil organic matter quality, SOMQ and index of tree influence potential, IP). The variability of SIR and DEA was higher than that of environmental properties. The patterns of accumulated variance as a function of distance varied among the soil properties. The variability of SIR and DEA mainly occurred at small (1 m) scale (and at the 10-40 m-scales for SIR), probably reflecting the quality of litter input that results of the influence of local assemblage of different tree species, though changes in the soil N and C contents. Indeed, total soil C and N contents explained the microbial properties at every scale. Coefficients of codispersion showed that neither SOMQ nor IP did correlate with SIR and DEA, and confirmed that total C and N contents explained microbial properties in a scale dependent and complex manner. Such spatial dependency underlines the importance of soil heterogeneity in this tropical forest with implications for sampling strategies when studying the microbial processes and their response to disturbances. (C) 2012 Elsevier B.V. All rights reserved.
ISSN: 0016-7061

hal-01032409
https://hal.archives-ouvertes.fr/hal-01032409
DOI : 10.1016/j.geoderma.2012.12.009

Résumé : Nous présenterons dans cette communication les premiers travaux de modélisation informatique d’une grammaire de la langue créole martiniquaise, en nous inspirant des descriptions fonctionnelles de Damoiseau (1984) ainsi que du manuel de Pinalie & Bernabé (1999). Prenant appui sur des travaux antérieurs en génération de texte (Vaillant, 1997), nous utilisons un formalisme de grammaires d’unification, les grammaires d’adjonction d’arbres (TAG d’après l’acronyme anglais), ainsi qu’une modélisation de catégories lexicales fonctionnelles à base syntaxico-sémantique, pour mettre en oeuvre une grammaire du créole martiniquais utilisable dans une maquette de système de génération automatique. L’un des intérêts principaux de ce système pourrait être son utilisation comme logiciel outil pour l’aide à l’apprentissage du créole en tant que langue seconde.
In this article, some first elements of a computational modelling of the grammar of the Martiniquese French Creole dialect are presented. The sources of inspiration for the modelling is the functional description given by Damoiseau (1984), and Pinalie’s & Bernabé’s (1999) grammar manual. Based on earlier works in text generation (Vaillant, 1997), a unification grammar formalism, namely Tree Adjoining Grammars (TAG), and a modelling of lexical functional categories based on syntactic and semantic properties, are used to implement a grammar of Martiniquese Creole which is used in a prototype of text generation system. One of the main applications of the system could be its use as a tool software supporting the task of learning Creole as a second language.

Droits : Ce document est protégé par le droit d'auteur. Il ne peut en aucun cas être utilisé sans l'autorisation de l'auteur et des ayant droits
recherch:HASH019aba2be5da862ae78a8060

Éditeur(s) : Kingston : Duperly Lithograph Kingston : Duperly Lithograph
Résumé : Photograph depicting the rebellion in Jamaica in 1832 where rebel slaves launched an attack on Monpelier Estate, property of Lord Seaford
(Funding) Support for the development of the technical infrastructure and partner training provided by the United States Department of Education TICFIA program.
St. Parish, Jamaica

Droits : All rights reserved by the source institution.

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we propose a theoretical approach to test the validity of the isomechanical analogues for post-perovskite structures. Intrinsic plastic properties are evaluated for three materials exhibiting a post-perovskite phase: MgSiO3, MgGeO3 and CaIrO3. Dislocation properties of each structure are determined using the Peierls-Nabarro model based on first-principles calculations of generalised stacking fault and the plastic properties are extended to crystal-preferred orientations using a visco-plastic self-consistent method. This study provides intrinsic parameters of plastic deformation such as dislocation structures and Peierls stresses that can be directly compared between the three materials. It appears that it is very difficult to draw any simple conclusions on polycrystalline deformation simply by comparing single crystal properties. In particular, contrasting single crystal properties of MgSiO3 and CaIrO3 lead to similar crystal-preferred orientation of the polycrystal aggregates.
ISSN: 0031-9201

hal-00420104
https://hal.archives-ouvertes.fr/hal-00420104
DOI : 10.1016/j.pepi.2008.04.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
B-type olivine fabrics are pervasive within highly depleted dunites of the small-sized Imono peridotite body located within the subduction-type Sanbagawa metamorphic belt of the southwest Japan arc. The dunites contain various microstructures, ranging from porphyroclastic to fine-grained intensely sheared textures. The Mg/(Mg+Fe) atomic ratios (Fo number) of olivine within these dunites are consistently around 0.9, as are the Cr/(Cr+Al) atomic ratios (Cr number) of chromian spinel, suggesting their evolution from a highly depleted magma (boninite). These data provide strong thermal constraints on the formation of the highly depleted dunites,as their formation requires hot, hydrous, shallow mantle (> 1250 degrees C at < 30 km depth) in the mantle wedge. Because the Sanbagawa metamorphic belt finally entrained these peridotites during progressive retrogression, B-type olivine fabrics probably developed in the fore-arc side of the subduction zone, above or along the subducting slab, possibly in association with dehydration fluids derived from the slab. The previously documented small magnitude of S-wave splitting can be explained by the seismic properties of B-type peridotites within an anisotropic layer of approximately several kilometers in thickness, oriented by flow parallel to the subducting slab, under maximum temperatures of 880-1030 degrees C depending on the flow stress. These findings indicate that such a B-type layer could constitute a dominant source of seismic S- and P-wave anisotropy in mantle wedge regions. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00412594
https://hal.archives-ouvertes.fr/hal-00412594
DOI : 10.1016/j.epsl.2008.06.014