Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In East Asia, widespread extensional sedimentary basins together with the close association of Metamorphic Core Complexes and magmatism are prominent features of the large-scale wide rift system developed during late Mesozoic times. This region thus appears as a proper place to study continental extension as well as questions about the link between continental extension and magmatism. This paper primarily provides pioneer exhumation time-constraints on the Linglong MCC (Jiaodong Peninsula) including cooling and deformation ages. MCC cooling at mid-crustal levels occurred at ca. 143 Ma. Besides, last ductile deformation occurred at ca. 134 Ma while final exhumation stages, under brittle 2 conditions, occurred as late as ca. 128 Ma. Continuous crustal stretching were then recorded by the emplacement of a synkinematic pluton in the upper crust at ca. 128 Ma that cooled fast below an intracrustal shear zone crossing the ductile-brittle transition at ca. 123 Ma. The ca. 120-118 Ma age cluster is ascribed to the fast cooling of undeformed plutons marking the end of extension that lasted, in the area, over a minimum period of ca. 30 My. Combining other MCC exhumation constraints and the onset of subsidence in the sedimentary basins, total duration of late Mesozoic extension in East Asia could be estimated at ca. 60 My, related with a rather long process for extension from 160 to at least 100 Ma. East Asian continental extension is heterogeneously distributed in space and time as revealed by fundamental differences between two end-member classes of migmatite-cored MCC already described in other wide rift systems. Extension seems to have first favoured partial melting which subsequently, in turn, maintained continental extension.
ISSN: 1342-937X

insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551/document
https://hal-insu.archives-ouvertes.fr/insu-00752551/file/Charles_et_al_Gondwana_Research_2012.pdf
DOI : 10.1016/j.gr.2012.10.011

Résumé : Arbol 5 a 10 m, el tronco generalmente delgado e irregular. Hojas alternas, pinnadas, oblongas, pecíolo corto; folíolos opuestos, numerosos, corto peciolados, de 1 a 2 cm, obtusos, enteros, pálidos. Flores numerosas, blancas, aromáticas, en panículas axilares; pétalos ligeramente más largos que los sépalos. Cápsula linear, triquetra, pendiente, de hasta 45 cm de largo, dehiscente, de color amarillo-cenizo; semillas generalmente aladas, oleaginosas.
Arbre de 5 à 10 m de haut, tronc généralement fin et irrégulier. Feuilles alternes, pennées, oblongues, à pétiole court; nombreuses folioles opposées, à court pétiole, de 1 à 2 cm, obtuses, entières, pâles. Fleurs nombreuses, blanches, aromatiques, disposées en panicules axillaires; pétales légèrement plus longs que les sépales. Capsule linéaire, à trois angles arrondis, pendante, pouvant atteindre 45 cm de long, déhiscente, jaune cendré; graines généralement ailées, oléagineuses.
Tree, 5-10 m high, trunk brittle, root with taste and odour of horseraddish. Leaves deciduous, alternate, 30-60cm long, compound 3-pinnate, leaflets opposite, numerous, short-petiolate, 1-2.5 cm x 0.6-1.5 cm, variable in shape; inflorescence a panicle, axillary, flowers fragrant numerous, petals white,14-18 mm x 6-8 mm; fruit a linear capsule, triquetrous, 20- 45 cm long, 2 cm thick, usually pendulous tan; seeds globular 10 mm in diameter usually winged.
Nativo del noroeste de la India, comúnmente se cultiva en las regiones tropicales de todo el mundo.
Originaire du nord-ouest de l’;Inde, habituellement cultivé dans les régions tropicales du monde entier.
Native to northwest India, usually culti

http://www.tramil.net/fototeca/plant237

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Domestication can influence many functional traits in plants, from overall life-history and growth form to wood density and cell wall ultrastructure. Such changes can increase fitness of the domesticate in agricultural environments but may negatively affect survival in the wild. We studied effects of domestication on stem biomechanics in manioc by comparing domesticated and ancestral wild taxa from two different regions of greater Amazonia. We compared mechanical properties, tissue organisation and wood characteristics including microfibril angles in both wild and domesticated plants, each growing in two different habitats (forest or savannah) and varying in growth form (shrub or liana). Wild taxa grew as shrubs in open savannah but as lianas in overgrown and forested habitats. Growth form plasticity was retained in domesticated manioc. However, stems of the domesticate showed brittle failure. Wild plants differed in mechanical architecture between shrub and liana phenotypes, a difference that diminished between shrubs and lianas of the domesticate. Stems of wild plants were generally stiffer, failed at higher bending stresses and were less prone to brittle fracture compared with shrub and liana phenotypes of the domesticate. Biomechanical differences between stems of wild and domesticated plants were mainly due to changes in wood density and cellulose microfibril angle rather than changes in secondary growth or tissue geometry. Domestication did not significantly modify "large-scale" trait development or growth form plasticity, since both wild and domesticated manioc can develop as shrubs or lianas. However, "finer-scale" developmental traits crucial to mechanical stability and thus ecological success of the plant were significantly modified. This profoundly influenced the likelihood of brittle failure, particularly in long climbing stems, thereby also influencing the survival of the domesticate in natural situations vulnerable to mechanical perturbation. We discuss the different selective pressures that could explain evolutionary modifications of stem biomechanical properties under domestication in manioc.
PLoS ONE

halsde-00917926
https://hal.archives-ouvertes.fr/halsde-00917926
https://hal.archives-ouvertes.fr/halsde-00917926/document
DOI : 10.1371/journal.pone.0074727

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
This paper aims to decipher the thermal evolution of the Montagne Noire Axial Zone (MNAZ,southern French Massif Central) gneiss core and its metasedimentary cover through determination ofP–T paths and temperature gradients. Migmatitic gneiss from the core of the dome record a clock-wise evolution culminating at 725 25 °C and 0.8 0.1 GPa with partial melting, followed by adecompression path with only minor cooling to 690 25° C and 0.4 0.1 GPa. Field structuralanalyses as well as detailed petrological observations interpreted in a petrogenetic grid indicate thatthe cover sequence experienced LP-HT metamorphism at <0.4 GPa. Apparent thermal gradientswithin the cover were determined with garnet–biotite thermometry and Raman Spectroscopy on Car-bonaceous Matter. High-temperature apparent gradients (e.g. 530 °C km1 along one transect) areexplained by late brittle–ductile extensional shearing evidenced by phyllonites that post-date peakmetamorphism. In areas where normal faults are less abundant and closely spaced, gradients of 20to 50 °C km1 are calculated. These gradients can be accounted for by a combination of domeemplacement and ductile shearing (collapse of isotherms), without additional heat input. Finally, thethermal evolution of the MNAZ is typical for many gneiss domes worldwide as well as with otherLP-HT terranes in the Variscides.
ISSN: 0263-4929

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388/document
https://hal-insu.archives-ouvertes.fr/insu-01290388/file/jmg12188.pdf
DOI : 10.1111/jmg.12188

Éditeur(s) : The Japanese Society of Systematic Zoology
Résumé : Prior to this study, two species of ophiuroid had been described from hydrothermal vent sites, and another from methane cold seeps, all from the Atlantic Ocean. Although ophiuroids have occasionally been reported from vents in the Pacific Ocean as well, none has been described before. This study presents two new species, Spinophiura jolliveti gen. et sp. nov., family Ophiuridae, and Ophiolamina eprae gen. et sp. nov., family Ophiacanthidae, which are most likely endemic to reducing environments in the East Pacific. We also include detailed descriptions of the post-metamorphic development of these species. Spinophiura jolliveti is characterized by up to five rather long, semi-erect arm spines and a relatively small oral shield. Its postlarva is unusual in lacking a buccal scale and in that the tooth forms later in development than in all other species the postlarvae of which have been examined. The most characteristic features of O. eprae are the attitude of the three proximal laminar mouth papillae, standing almost vertically on the oral plate, and the presence of two oval, scale-like, distal papillae. Additional migrant (non-vent-endemic) species found at Pacific vent sites are tabularized, but not identified below genus level due to the poor taxonomic state of the Pacific ophiuroid fauna. Biogeographic and ecological issues are discussed.
Species Diversity (1342-1670) (The Japanese Society of Systematic Zoology), 2006-02 , Vol. 11 , N. 1 , P. 7-32

Droits : 2006 The Japanese Society of Systematic Zoology
http://archimer.ifremer.fr/doc/2006/publication-6475.pdf
http://archimer.ifremer.fr/doc/00000/6475/

Éditeur(s) : HAL CCSD
Résumé : International audience
The Kazdağ Massif exposes a metamorphic dome in the Biga Peninsula of northwest Turkey. An extensional origin has been proposed for the dome, limited on both flanks by detachments and/or shear zones. The northern flank is bounded by the extensional Alakeçi Shear Zone (ASZ), whose P-T-t path is still poorly known. We therefore focus on its metamorphic conditions and related temporal history to precise its tectono-metamorphic evolution. The local tectonostratigraphy in structurally ascending order comprises: (i) the high-grade metamorphic core rocks of the Kazdaǧ Massif (gneisses and micaschists intercalated with amphibolites and marbles); (ii) the two kilometer-thick ASZ; (iii) the overlaying unmetamorphosed pre-Cenomanian accretionary Çetmi mélange; and (iv) Neogene sedimentary and volcanic cover rocks. ASZ mylonites were derived from both the core rocks and the mélange lithologies. From the north to the south the mylonitic fabrics in the ASZ depict a top-to-the N-NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdaǧ Massif. The northward transition from ductile to brittle-ductile regime through the ASZ shows that the deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium within the mylonitic gneisses and schists contains Qtz + Fs + Ms + Bt + Grt ± St ± Sill, with late retrogressive chlorite after biotite and garnet. Four samples of ASZ rocks yielded pressures between 6.9-5.7 kbar and temperatures between 706-587°C. Three samples from the mylonitic rocks supplied in situ isochron 36Ar/40Ar mica ages between 31.2-24.2 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic and structural results support the extensional character of the ASZ, and sketch transition from sillimanite core gneisses in the deeper structural levels to chlorite schists towards the top of the shear zone. These new data allow to precise the peak P-T conditions and the temporal evolution in the northern flank of the Kazdaǧ Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. At the regional scale, this tectono-metamorphic pattern is similar to those observed on other places of the north Aegean domain.
IOP Conference Series
Austin, TE, United States

hal-00642725
https://hal-brgm.archives-ouvertes.fr/hal-00642725
DOI : 10.1088/1755-1307/2/1/012012

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The way faults control upward fluid flow in nonmagmatic hydrothermal systems in extensional context is still unclear. In the Eastern Pyrénées, an alignment of twenty-nine hot springs (29 ∘ C to 73 ∘ C), along the normal Têt fault, offers the opportunity to study this process. Using an integrated multiscale geological approach including mapping, remote sensing, and macro-and microscopic analyses of fault zones, we show that emergence is always located in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt fault footwall. The hot springs distribution is related to high topographic reliefs, which are associated with fault throw and segmentation. In more detail, emergence localizes either (1) in brittle fault damage zones at the intersection between the Têt fault and subsidiary faults or (2) in ductile faults where dissolution cavities are observed along foliations, allowing juxtaposition of metasediments. Using these observations and 2D simple numerical simulation, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids, infiltrated at high elevation in the fault footwall relief, get warmer at depth because of the geothermal gradient. Topography-related hydraulic gradient and buoyancy forces cause hot fluid rise along permeability anisotropies associated with lithological juxtapositions, fracture, and fault zone compositions.
ISSN: 1468-8115

hal-01582968
https://hal-brgm.archives-ouvertes.fr/hal-01582968
https://hal-brgm.archives-ouvertes.fr/hal-01582968/document
https://hal-brgm.archives-ouvertes.fr/hal-01582968/file/Taillefer_et_al_Geofluids_2017.pdf
DOI : 10.1155/2017/8190109

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Vertical displacements on the SW-NE T (e) over capt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Caranca and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. Ar-40/Ar-39 data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Caranca gneiss massif records systematically younger Ar-40/Ar-39 ages. These younger Ar-40/Ar-39 ages in the Canigou-Caranca gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Caranca suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the T (e) over capt fault are recorded by "low" temperature thermochronology using K-feldspar Ar-40/Ar-39, zircon and apatite fission track and (U-Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55-60 Ma to Late Eocene at a mean rate of 15-20 degrees C/Ma in the final stage. This cooling stage corresponds to T (e) over capt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Caranca massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30 degrees C/Ma during Early Oligocene followed by a more moderate rate of 3 degrees C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the T (e) over capt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.
ISSN: 1437-3254

hal-00411442
https://hal.archives-ouvertes.fr/hal-00411442
DOI : 10.1007/s00531-007-0179-x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD Magnolia Press
Résumé : International audience
Despite their importance in marine biodiversity, invertebrates are far less studied than vertebrates. Given the current globalbiodiversity crisis and insufficient taxonomic resources, sustained efforts need to be undertaken to assess species diversity,especially in the highly threatened ‘biodiversity hotspots’. Réunion is a young volcanic island lying in the Mascarene Islands(south-western Indian Ocean, SWIO), a marine biodiversity hotspot. A substantial sampling effort was conductedaround Réunion Island to document shallow water reef-associated ophiuroid (brittle-stars) diversity, a class recognised asthe most diverse among echinoderms. A total of 33 species were documented, increasing the known species richness ofthe island by 56%. Findings include 15 new records for Réunion, 11 for the Mascarene Islands and 8 for the Indian Ocean.The most diverse family was Ophiocomidae, a family of large, abundant and conspicuous tropical species. Even in thiswell studied family, a new species was revealed by this survey. Morphological variants together with DNA sequence variationswithin several species revealed cryptic species. We compared our results with the known fauna of other MascareneIslands and discuss biogeographic implications for the region.
ISSN: 1175-5326

hal-01327053
https://hal-univ-perp.archives-ouvertes.fr/hal-01327053
DOI : 10.11646/zootaxa.4098.2.4

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : HAL CCSD Society of Economic Geologists
Résumé : International audience
The ~8-Moz Sadiola Hill gold deposit is located in the Kédougou-Kénieba inlier, a window of deformed ca. 2200 to 2050 Ma rocks that crop out in eastern Senegal and western Mali. The geology of the inlier differs from other Paleoproterozoic granite-greenstone belts and sedimentary basins by the abundance of carbonate rocks. The Sadiola Hill gold deposit occurs within 3 km of the Senegal-Mali shear zone, and country rocks in the region have undergone polycyclic deformation. The lithostratigraphy of the open pit consists of impure limestones overlain by younger sequences of detrital sedimentary rocks, which include arenite, wacke, and siltstone. The sedimentary rocks have been subjected to regional greenschist-facies metamorphism and have been intruded by multiple generations of synkinematic, calc-alkaline stocks and dikes. The bulk of the ore is hosted within a N-S- to NNW-trending, 10- to 50-m-wide, brittle-ductile dilational shear zone defined as the Sadiola shear zone. Gold lodes also occur along an array of steep NNE-trending shear zones. Geometric and kinematic analyses indicate that the ore-hosting structures were undergoing sinistral displacement at the time of mineralization, locally defined as the D3s NNW-SSE-shortening event. Hydrothermal alteration is polyphase and includes an early high-temperature calc-silicate phase (i.e., porphyroblastic growth of actinolite-tremolite) followed by a potassic phase (i.e., biotite-calcite-quartz ± K-feldspar-tourmaline-actinolite) that was synchronous with ore mineral deposition. Paragenetic studies reveal a multistage ore development that includes an As-rich sulfide stage, followed by an Au-Sb stage. The ore is associated with a metal enrichment suite of Au-As-Sb ± Cu-Fe-W-Mo-Ag-Bi-Zn-Pb-Te. The Sadiola Hill deposit shares a similar relative timing and structural setting to that of other world-class orogenic gold systems in the West African craton (e.g., Ashanti, Loulo), with gold deposition occurring during a period of transcurrent tectonics, after the cessation of region-wide compressional deformation. The high-temperature paragenesis at Sadiola Hill is atypical of gold mineralization in the craton and indicates that the late Eburnean tectono-magmatic activity between ca. 2080 and 2060 Ma played an important role in the dynamics of hydrothermal fluid circulation along the Senegal-Mali shear zone.
ISSN: 0361-0128

hal-01583358
https://hal.archives-ouvertes.fr/hal-01583358
DOI : 10.2113/econgeo.112.1.23

Éditeur(s) : HAL CCSD
Résumé : International audience
In most rock mechanical testing devices, the texture developed during deformation is only observed after the failure, and the detailed mapping of cracks and pore structure evolution, just before or after rupture, remains speculative. Computerized X-ray tomography (CT X-ray) offers a way to observe 'in vivo' some characteristics of a tested sample in the course of its deformation. Therefore we developed an X-ray transparent tri-axial cell that was included in a medical purpose X-ray scanner with a volumetric resolution of the order of 1 mm3. This technique is described and applied to a porous calcarenite, which is regularly scanned for porosity evolution during mechanical testing. The experiment is performed at low confining pressure (2-10 MPa). During testing, an axial load is applied until failure and is then progressively decreased. In these experiments, the peak stress is preceded by phase of diffuse dilatancy. After failure localization, the axial stress is unloaded until the stress reaches isotropy. During this unloading phase, the previous diffuse dilatancy is lost due to an elastic relaxation. Then, the stress is completely relaxed. At this moment the dilatancy increases again and the residual dilatancy is larger than that reached at the peak stress. When observed "post mortem" at microscopic scale, the dilatant structures are comprised of cataclastic deformation bands and cracks in some larger crystals.
International Journal of Rock Mechanics and Mining Science

hal-00767563
https://hal.archives-ouvertes.fr/hal-00767563
DOI : 10.1016/j.ijrmms.2012.07.020

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
The brittle to ductile transition may strongly influence hydraulic properties of rocks at the depth and temperature ranges that hydrothermal fluids circulate. To examine this transition in the context of the oceanic crust, we conducted a series of deformation experiments on a natural basalt sample at in situ oceanic crust conditions. Dilatancy was measured during deformation. The method consisted in monitoring the volume of pore fluid that flows into or out of the sample at constant pore pressure. Mechanical and microstructural observations at experimental constant strain rate of 10−5 s−1 indicated that the basalt was brittle and dilatant up to 800°C. At higher temperature, the deformation mode became macroscopically ductile and samples compacted. These observations have important implications on heat transfer and fluid migration in oceanic crust.
ISSN: 0094-8276

hal-01172352
https://hal.archives-ouvertes.fr/hal-01172352
DOI : 10.1002/2015GL063437

Éditeur(s) : HAL CCSD University of Chicago Press
Résumé : International audience
In the North China block, the south Liaodong Peninsula massif is an elliptical metamorphic core complex (MCC) with a long axis trending NE‐SW. In cross‐section view, it is asymmetric, with a steeply dipping northwestern flank and a gently dipping southeastern flank. It consists of three lithotectonic units: a gneissic migmatite unit, a Paleo‐ to Meso‐Proterozoic micaschist‐slate unit, and a Neoproterozoic to Mesozoic sedimentary cover. Three deformation events related to extensional tectonics are distinguished in the study area: D1 is a ductile deformation related to the exhumation of the MCC; the following event, D2, corresponds to the development of recumbent folds formed during the early exhumation of the MCC; and the youngest event, D3, corresponds to brittle normal faulting that controlled the opening of a Cretaceous continental half‐graben basin. A pre‐D1 event characterized as northward verging is interpreted as the result of N‐S shortening that occurred in the Late Triassic during the final stages of the collision between the North and South China blocks. The ductile and brittle structures were developed coevally, with synkinematic plutonism and formation of half‐grabens. New 40Ar/39Ar and U/Pb Cretaceous ages obtained from the mylonitic granodiorite, gneissic migmatite, orthogneiss, and granite indicate that the south Liaodong Peninsula MCC is contemporaneous with other Cretaceous extensional structures, such as numerous syntectonic plutons bounded by ductile normal faults, MCC, and half‐graben basins, described in eastern China. Among the several hypotheses proposed to account for the Mesozoic extension along the eastern margin of Eurasia, lithosphere convective removal appears to be the most likely.
ISSN: 0022-1376

insu-00362879
https://hal-insu.archives-ouvertes.fr/insu-00362879
https://hal-insu.archives-ouvertes.fr/insu-00362879/document
https://hal-insu.archives-ouvertes.fr/insu-00362879/file/WeiLin-TheJournalofGeology-2008.pdf
DOI : 10.1086/527456

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002

Éditeur(s) : HAL CCSD
Résumé : International audience
The way faults control upward fluid flow in extensive hydrothermal systems without an abnormal heat source such as volcanic or plutonic activity is still unclear. In the Eastern Pyrénées, an alignment of 29 hot springs (from 29 • C to 73 • C) along the Têt normal Fault offers the opportunity to study this process. Using an integrated multi-scale geological approach including mapping, remote sensing, macro and microscopic analyses of fault zones, we show that hot springs locate close to high topographic reliefs related to fault throw and segmentation. Emergences are always in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt Fault footwall. In more details, they localize either (1) in brittle fault damage zones at the intersection between the Têt Fault and subsidiary faults, and (2) into hercynian ductile faults where dissolution cavities run along shear zones. Using these observations and 2D preliminary numerical simulations, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids infiltrate at high altitude in the fault footwall relief where they acquire temperature because of the geothermal gradient. Hydraulic gradient and buoyancy forces allow them to upflow along fault-related permeability anisotropies. The identification and prioritization of the features controlling this kind of system have important implications for geothermal exploration and for the understanding of fluid-flow into the brittle Earth's crust in general.
EGU 2017
Vienne, Austria

hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096/document
https://hal-brgm.archives-ouvertes.fr/hal-01491096/file/EGU2017-Taillefer-etal_4996.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The NW-trending Talas-Ferghana Fault (TFF) in Kyrgyzstan, Central Asia, is one of the largest intracontinental strike-slip faults in the world. It extends over a distance of more than 2000 km from southern Tourghai to western Tarim and exhibits a maximum dextral offset of ∼200 km during the late Palaeozoic to present. The history of the fault provides important insights for the understanding of the evolution of southern Central Asia but remains poorly constrained due to lack of reliable geochronological data. We present new Ar-Ar ages and structural data from the Kyrgyz West Tianshan, that elucidate the kinematic history of the TFF in the Palaeozoic and Mesozoic. 40Ar/39Ar ages on mylonitic white micas document a deformational history consisting of several episodes. A late Carboniferous age of 312 ± 4 Ma point to initiation of top-to-the-south and dextral transpressional deformation during a metamorphic overprint in Precambrian and Palaeozoic rocks along the northern compartment of the TFF. The main phase of dextral motion along the entire fault occurred in the Permian as suggested by minimum ages of 260-290 Ma obtained at two different locations in the NW and central parts of the TFF. Partial isotopic resetting occurred between 240 and 210 Ma and younger ages of <200-210 Ma are ascribed to late brittle reactivation and hydrothermal fluid flow in the Late Triassic to Early Jurassic times. The Jurassic trans-tensional phase is featured by emplacement of 195 ± 3 Ma pegmatitic dykes. The Ar-Ar mineral ages and structural data argue for a major phase of dextral shearing, affecting the entire region from the West Tianshan to Mongolia in the late Permian and leading to formation of almost equally spaced major NW-trending dextral strike-slip faults. The uniform character of this deformation indicates that the process of amalgamation in this part of the CAOB ended prior to the late Permian, and Central Asia evolved as a single coherent continental block since that time.
ISSN: 0743-9547

hal-00831326
https://hal.archives-ouvertes.fr/hal-00831326
DOI : 10.1016/j.jseaes.2013.02.012

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776