Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
The long-lived Andean subduction zone underwent several flat slab episodes and is therefore ideal to study the consequences of a complete cycle of slab flattening and steepening on the upper plate deformation pattern. In the modern Peruvian forearc (15°–17°S), slab flattening caused a Paleogene (52–30 Ma) landward migration of volcanic activity. Combining structural geology and a source-to-sink thermochronological study, we show that the flat slab period is contemporaneous with uplift accommodated by large-scale crustal extension in the forearc. In this light, we argue that the study area is an ancient analog to the modern Mexican and northern Peruvian forearcs located above modern flat slab segments and currently undergoing widespread extension.
ISSN: 0091-7613

hal-01685553
https://hal.archives-ouvertes.fr/hal-01685553
DOI : 10.1130/G38990.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of a large OIB-type volcanic sequence on top of an obducted nappe in the Lesser Caucaus of Armenia helps us explain the obduction processes in the Caucasus region that are related to dramatic change in the global tectonics of the Tethyan region in the late Lower Cretaceous. The ophiolitic nappe preserves three distinct magmatic series, obducted in a single tectonic slice over the South Armenian Block during the Coniacian-Santonian (88-83 Ma), the same time as the Oman ophiolite. Similar geological, petrological, geochemical and age features for various Armenian ophiolitic massifs (Sevan, Stepanavan, and Vedi) argue for the presence of a single large obducted ophiolite unit. The ophiolite, shows evidence for a slow-spreading oceanic environment in Lower to Middle Jurassic. Serpentinites, gabbros and plagiogranites were exhumed by normal faults, and covered by radiolarites. Few pillow-lava flows have infilled the rift grabens. The ophiolite lavas have hybrid geochemical composition intermediate between Arc and MORB signatures: (La/Yb)(N) = 0.6-0.9: (Nb/Th)(N) = 0.17-0.57; (Nd-143/Nd-144)(i) = 0.51273-0.51291; (Sr-87/Sr-86)(i) = 0.70370-0.70565; (Pb-207/Pb-204)(i) = 15.4587-15.5411; (Pb-208/Pb-204)(i) = 37.4053-38.2336; (Pb-206/Pb-204)(i) = 17.9195-18.4594. These compositions suggest they were probably formed in a back-arc basin by melting of a shallow asthenosphere source contaminated by a deeper mantle source modified by subducted slab-derived products. Sr-87/Sr-86 ratios and petrological evidence show that these lavas have been intensely altered by mid-oceanic hydrothermalism as well as by serpentinites, which are interpreted as exhumed mantle peridotites. The gabbros have almost the same geochemical composition as related pillow-lavas: (La/Yb)(N) = 0.2-2.3; (Nb/Th)(N) = 0.1-2.8; (Nd-143/Nd-144)(i) = 0.51264-0.51276: (Sr-87/Sr-86)(i) = 0.70386-0.70557; (Pb-207/Pb-204)(i) = 15.4888-15.5391; (Pb-208/Pb-204)(i) = 37.2729-37.8713; (Pb-206/Pb-204)(i) = 17.6296-17.9683. Plagiogranites show major and trace element features similar to other Neo-Tethyan plagiogranites (La/Yb)(N) = 1.10-7.92; (Nb/Th)(N) = 0.10-0.94; but display a less radiogenic Nd isotopic composition than basalts [(Nd-143/Nd-144)(i) = 0.51263] and more radiogenic (Sr-87/Sr-86)(i) ratios. This oceanic crust sequence is covered by variable thicknesses of unaltered pillowed OIB alkaline lavas emplaced in marine conditions. Ar-40/Ar-39 dating of a single-grain amphibole phenocryst provides a Lower Cretaceous age of 117.3 +/- 0.9 Ma, which confirms a distinct formation age of the OIB lavas. The geochemical composition of these alkaline lavas is similar to plateau-lavas [(La/Yb)(N) = 6-14; (Nb/Th)(N) = 0.23-0.76; (Nd-143/Nd-144)(i) = 0.51262-0.51271; (Sr-87/Sr-86)(i) = 0.70338-0.70551; (Pb-207/Pb-204)(i) = 15.5439-15.6158; (Pb-208/Pb-204)(i) = 38.3724-39.3623; (Pb-206/Pb-204)(i) = 18.4024-19.6744].;They have significantly more radiogenic lead isotopic compositions than phiolitic rocks, and fit the geochemical compositions of hot-spot derived lavas mixed with various proportions of oceanic mantle. In addition, this oceanic + plateau sequence is covered by Upper Cretaceous calc-alkaline lavas: (La/Yb)(N) = 2.07-2.31; (Nb/Th)(N) = 0.08-0.15; (Nd-144/Nd-143)(i) = 0.51271-0.51282; (Sr-117/Sr-116)(i) = 0.70452-0.70478), which were likely formed in a supra-subduction zone environment. During the late Lower to early Upper Cretaceous period, hot-spot related magmatism related to plateau events may have led to significant crustal thickening in various zones of the Middle-eastern Neotethys. These processes have likely hindered subduction of some of the hot and thickened oceanic crust segments, and allowed them to be obducted over small continental blocks such as the South Armenian Block.
ISSN: 0024-4937

hal-00443855
https://hal.archives-ouvertes.fr/hal-00443855
DOI : 10.1016/j.lithos.2009.02.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Madeira Sn-Nb-Ta deposit corresponds to the albite-enriched facies of Madeira granite (Madeira Suite) that is part of a NE-SW alignment of three granitic bodies. Structural analyses suggest that the albite-enriched granite emplacement and development of related structures occurred in a different tectonic setting than earlier facies of the granitic bodies in the NE-SW alignment and that the structure was dominated by a N-NE-trending shortening related to a left-lateral motion along a NE-SW corridor within a Riedel shear. Three types of structures (flat-lying, near vertical fractures, and geodes/miaroles) concentrated the last magmatic-related fluid in the albite-enriched granite. U-Pb in situ zircon dating of the albite-enriched granite yielded an age of 1,822 ± 22 Ma. The other granitic plutons of the Madeira Suite, Água Boa granite (topaz-granite facies), and Europa per-alkaline granite formed at 1,825 ± 14 Ma, 1,831± 11 Ma, and 1,839 ± 10 Ma, respectively. The granite bodies of the Madeira Suite occur in an area occupied by a cauldron complex composed of volcanic sequences (Iricoumé Group) and associated A-type granites (Mapuera Suite), and their formation was controlled by the reactivation of the cauldron structures and the pre-existing structures. The gap between the cauldron complex and the Madeira Suite is no greater than 35 Ma. The geological evolution was reanalyzed from the perspective of an entire extensional environment where three successive episodes of A-type magmatism and basin formation (Urupi Formation) occurred. The data and interpretations of this work imply crucial constraints on the petrologic models proposed for the albite-enriched granite and, consequently, on the genesis of the Madeira deposit
ISSN: 0301-9268

insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888/document
https://hal-insu.archives-ouvertes.fr/insu-00939888/file/BastosNeto-PrecambrianResearch-2014.pdf
DOI : 10.1016/j.precamres.2013.12.021

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : A detailed and integrated geologic–hydraulic–geophysical–geochemical study of groundwater flow in the near-vicinity of a borehole drilled into fractured and karstified limestone demonstrates the power of such an integrated approach in localising and characterising preferential groundwater flow pathways and ambient borehole flow. The study, conducted in the vicinity of a 100-m-deep research borehole on the island of Mallorca, achieves such characterisation on a scale from millimetres to tens of metres in scale. More specifically, it adds single packer and open-hole pumping test interpretations to the results obtained during fluid logging, impeller flowmeter testing, borehole imaging, core descriptions and an innovative fracture analysis. This approach allows the delineation of the main flowing features and showed that such features are directly or indirectly linked to karst phenomena. Understanding this complex flow system is critical for an appropriate assessment of groundwater resources and the design of sustainable groundwater production schemes.
ISSN: 1431-2174

hal-00404921
https://hal.archives-ouvertes.fr/hal-00404921
DOI : 10.1007/s10040-006-0086-4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Urucum region (Mato Grosso do Sul, Brazil) contains Neoproterozoic–Cambrian manganese ore in the layers Mn-1, Mn-2, and Mn-3, which are interbedded with iron formations (IFs) from the Santa Cruz Formation (Jacadigo Group) and surrounded by carbonate rocks from the Bocaina and Tamengo Formations (Corumbá Group). These rocks fill an ancient graben, with sediments from the Santa Cruz Formation overlying fluvial deposits from the Urucum Formation and limestones from the Bocaina and Tamengo Formations deposited in the shallow marginal regions. As the graben deepened, it was flooded with microbe-rich seawater and hydrothermalism began. Iron and manganese precipitated within the pores in arkosic sandstones, thereby forming the clastic Lower Mn-1 ore layer. The remaining manganese was simultaneously deposited on the basin floor with clastic clay and silt from turbidity currents, thereby forming the Upper Mn-1 clastic–chemical ore layer. The sedimentation of Mn-1 and its host IFs was controlled by seawater saturation and homogeneous oxidation, which caused manganese and iron sedimentation and the death of microorganisms, generating mangano-ferriferous sediments with high P, Co and Ni contents. Mn-2 formed during periods of tectonic quiescence through water influxes that carried abundant microbes, Fe(II), Mn(II), and SiO2. Under UV radiation, these microbes oxidized Mn(II) and Fe(II) to form hydroxides and died, thereby forming biomass that was enriched in P, Co and Ni and minor carbonate adjacent to and below the oxycline. These microbes also formed kremydilites, oblate structures that resemble manganese stromatolites, within the biomass and produced CH4 and/or H2 gas bubbles. During early diagenesis, wormlike organisms inhabited the biomass and probably separated iron from manganese to produce cryptomelane microbialites, which agglutinated to form manganese micronodules that coalesced to form the massive layer Mn-2. This process ended with the disappearance of microorganisms and the sedimentation of the IFs, and a new water influx generated layer Mn-3 via the same process. The final seawater upwelling precipitated IFs in the basin depocenter, whereas limestone from the Tamengo Formation was deposited along the basin’s edges. The diagenesis initially transformed the manganese oxides into cryptomelane and then into hollandite.
ISSN: 0169-1368

hal-01684668
https://hal.archives-ouvertes.fr/hal-01684668
DOI : 10.1016/j.oregeorev.2017.09.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Much debate exists concerning the strength distribution of the continental lithosphere, how it controls lithosphere-scale strain localization and hence enables plate tectonics. No rheological model proposed to date is comprehensive enough to describe both the weakness of plate boundary and rigid-like behaviour of plate interiors. Here we show that the duality of strength of the lithosphere corresponds to different stages of microstructural evolution. Geological constraints on lithospheric strength and large strain numerical experiments reveal that the development of layers containing weak minerals and the onset of grain boundary sliding upon grain size reduction in olivine cause strain localisation and reduce strength in the crust and subcontinental mantle, respectively. The positive feedback between weakening and strain localization leads to the progressive development of weak plate boundaries while plate interiors remain
ISSN: 0040-1951

insu-00949213
https://hal-insu.archives-ouvertes.fr/insu-00949213
https://hal-insu.archives-ouvertes.fr/insu-00949213/document
https://hal-insu.archives-ouvertes.fr/insu-00949213/file/Gueydan_et_al_2014.pdf
DOI : 10.1016/j.tecto.2014.02.005

Éditeur(s) : HAL CCSD
Résumé : IGARSS 2015, Milan, ITA, 26-/07/2015 - 31/07/2015
International audience
LiDAR remote sensing has been shown to be a good technique for the estimation of forest parameters such as canopy heights and aboveground biomass. Whilst airborne LiDAR data are in general very dense but only available over small areas due to the cost of their acquisition, spaceborne LiDAR data acquired from the Geoscience Laser Altimeter System (GLAS) have a coarser acquisition density associated with a global cover. It is therefore valuable to analyze the integration relevance of canopy heights estimated from LiDAR sensors with ancillary data such as geological, meteorological, and phenological variables in order to propose a forest canopy height map with good precision and high spatial resolution.In this study, canopy heights extracted from both airborne and spaceborne LiDAR, were first extrapolated from available environmental data. The estimated canopy height maps using random forest (RF) regression from the airborne or GLAS calibration datasets showed similar precisions (RMSE better than 6.5 m). In order to improve the precision of the canopy height estimates regression-kriging (kriging of RF regression residuals) was used. Results indicated an improvement in the RMSE (decrease from 6.5 to 4.2 m) for the regression-kriging maps from the GLAS dataset, and from 5.8 to 1.8 m for the regression-kriging map from the airborne LiDAR dataset.
Geoscience and Remote Sensing Symposium (IGARSS), 2015 IEEE International
Milan, Italy

hal-01244677
https://hal.archives-ouvertes.fr/hal-01244677
https://hal.archives-ouvertes.fr/hal-01244677/document
https://hal.archives-ouvertes.fr/hal-01244677/file/mt2015-pub00044297.pdf
DOI : 10.1109/IGARSS.2015.7326729

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
Since the early descriptions published by Callaway in 1884, the gently dipping mylonites exposed along the Moine Thrust at the Stack of Glencoul have drawn generations of geologists to the northern part of the Assynt district. These mylonites, derived from Cambrian quartzites (footwall) and Moine pelites and psammites (hanging wall), have figured prominently in: a) early research into the influence of crystal plastic deformation and recrystallization on microstructural and crystal fabric evolution; b) debates on the kinematic interpretation of macro- and micro-structures and crystal fabrics; and c) debates on the tectonic significance of such kinematic data. In this paper first we briefly review the historical aspects of this research and then, using both previously published and unpublished data, document the finite strain and quartz fabric development at this classic mylonite locality. A tectonic interpretation of these data, together with quantitative estimates of flow vorticities associated with mylonite formation at the Stack of Glencoul, are presented in a companion paper by Law (2010).
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne, Geological Society Speci

hal-00564962
https://hal.archives-ouvertes.fr/hal-00564962

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : We provide evidence for a plume-like upwelling beneath the Eifel hotspot, Western Germany, by using teleseismic shear-wave splitting to resolve the anisotropy associated with upwelling flow that is spreading laterally into the asthenosphere. The variation in fast-polarization azimuth we find across the Eifel hotspot is explained by a model of slowly upwelling material that is horizontally being deflected or sheared in a parabolic asthenospheric flow (PAF) pattern toward west-southwest, a direction that correlates with Eurasian absolute plate motion. We suggest that the lack of an age progression for Eifel volcanism, which is expected for a fixed-upwelling model, is a result of (1) sporadic volcanism due to a low excess plume temperature and/or varying crustal stresses that periodically relax and facilitate eruption, and (2) complex upwelling flow pathways and/or Late Tertiary changes in the slow Eurasian plate motion. The success of the PAF model in fitting the data is remarkable given the small number of parameters (four) and the consistency with the plate motion direction determined from geology and/or geodesy. This suggests that a predictable mantle-anisotropy pattern may exist also for other hotspots driven by plume-like upwellings, and that splitting can be a useful diagnostic to differentiate between plume-like and alternative sources for mantle hotspots.
Mantle plumes - a multidisciplinary approach

hal-00407986
https://hal.archives-ouvertes.fr/hal-00407986
DOI : 10.1007/978-3-540-68046-8

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The morphogenetic evolution of the Lesser Caucasus has been strongly influenced by Plio-Quaternary volcanic and tectonic events and Pleistocene glaciations. Fluvio-lacustrine environments, indicated by diatomaceous deposits, prevailed in the Syunik region of southern Armenia during the Pliocene and Pleistocene. The Pleistocene diatomaceous deposits studied contain leaf impressions and pollen, allowing local palaeoclimatic reconstructions. The chronology of morphogenetic events has been determined by 17 radiometric dates (K/Ar, Ar/Ar, U/Th), palaeomagnetic investigations and is placed in a spatial context by a detailed geomorphological map and a 24-km geological transect of the Vorotan valley, the main area studied. Before 1.21 Ma, tectonic movements (antecedents of the lower part of the Vorotan valley) generated extensive lake formations with diatomaceous deposits. From 993 ka, volcanic eruptions produced lava flows that covered the fluvio-lacustrine accumulations. During Marine Isotopic Stages 12, 6 and 4, glaciers and fluvio-glacial deposits were probably present overall the principal uplands and valleys of southern Armenia. At 53.68 ka (MIS 3), 12.6 ka, 10.78 ka and 4.14 ka (MIS 1), the development of travertines on some slopes and in some valleys highlights temperate and humid climatic phases. Palaeobotanical studies of leaf and pollen floras show that the vegetation changed several times from forested to steppic phases in response to the climate oscillations of the Lower Pleistocene. This work proposes a first morphogenic and palaeoclimatic reconstruction from the lower Pleistocene to the Postglacial period, when the first settlements of the population in the Lesser Caucasus were influenced by tectono-volcanic events, lake level changes and glacialeinterglacial oscillations forced by the obliquity orbital parameter (41 ky cycles).
ISSN: 1040-6182

hal-00481939
https://hal.archives-ouvertes.fr/hal-00481939
DOI : 10.1016/j.quaint.2010.02.008

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Anisotropy of low-field magnetic susceptibility (AMS) of basaltic lava flows can give some clues about post-emplacement tilting occurring in volcanic sequences. Such a study has been carried out on a sequence of 19 successive lava flows from Kerguelen Archipelago. Surprisingly, two different patterns were observed. The first one - herein called normal fabric - is consistent with the lava-flow direction inferred from geological observations, whereas the second one observed for about 70 per cent of the analysed samples - herein called abnormal fabric - appears to be unrelated to the shear history of the lava flows during their emplacements. These abnormal fabrics are not strictly inverse fabric but seem to have a more complex origin. The unusual nature of these abnormal fabrics has been confirmed by lattice preferred orientation of plagioclases obtained from high-resolution electron backscattered diffraction measurements. The aim of this study is to propose a physical interpretation of these fabrics. A first step in our understanding was to clearly identify the nature and the magnetic properties of the Fe-Ti oxides assemblage. Thus, we present a comprehensive rock magnetic analysis relying on low- and high-temperature thermomagnetic curves (K-T), crossover diagrams, first-order reversal curves, ore-microscopy, Mössbauer measurements and electron backscattered images. We found that in the present case the abnormal fabrics are probably linked to a mixture of prevailing single domain (SD) strongly interacting grains population and a subsidiary multidomain grains population. SD grains are identified as small magnetite crystallized within the interstitial glass in globular aggregates along the silicate framework. Then a question arises: to what extent such SD interacting grains in globular aggregates can affect the magnetic susceptibility and its anisotropy? To answer this question, we developed a physical model in which the total energy density of an SD grain with an uniaxial anisotropy is minimized. In this model, the distribution function of the direction of the magnetic interaction field is comprised between two boundary states. It is either isotropic, which formally corresponds to the thermal demagnetized state, or it is ordered, which formally corresponds to the Alternative Field demagnetized state. We show that in both cases the degree of anisotropy decreases as the interaction field increases. Thus, we conclude that the abnormal fabric encountered in this study can be simply explained by strong magnetostatic interactions that would explain the large scattering of AMS often observed in basaltic lava flows.
ISSN: 0956-540X

hal-00716449
https://hal.archives-ouvertes.fr/hal-00716449
https://hal.archives-ouvertes.fr/hal-00716449/document
https://hal.archives-ouvertes.fr/hal-00716449/file/gji-S-12-HAL.pdf
DOI : 10.1111/J.1365-246X.2012.05421.X

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The South East Sayan area,Wof the Lake Baikal is subjected to a very complex tectonic setting where the extensional stress field of the Baikal Rift System meets the compressional stress field generated by the India­Asia collision further south. Using satellite images, aerial photographs, SRTM DEM, field mapping of geomorphological structures, and published neotectonics and geological data we show that most of the relief in the SE Sayan initiated during Late Pliocene­Pleistocene through compressive reactivation of inherited structures. By Late Quaternary, clockwise rotation of the compressive field generated strike­slip faulting and local, secondary extension still within a general compressional stress field. We demonstrate that the formation of the small-scale extensional basins within the East Sayan range is not linked to general the extension in the Baikal Rift System nor to a possible asthenospheric plume acting at the base of the crust but rather to the rotation of small rigid tectonic blocks driven by the compression.
ISSN: 0743-9547

insu-00605062
https://hal-insu.archives-ouvertes.fr/insu-00605062
DOI : 10.1016/j.jseaes.2010.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Isotopes have been widely used for source identification since the early twentieth century. Recent advances in analytical techniques have increased the precision and the accuracy of isotope analysis. As a result, the use of isotopes has spread to several fields (e.g., ecology, food chemistry, archaeology, environmental health and pollution, and forensic sciences). This review examines the principal uses of stable-isotope analyses for tracing origins or sources, along with statistical methods employed for data interpretation, in recent papers (2007―09) dealing essentially with food authentication, ecology, environmental pollution and other applications, including geology, police forensics, hydrology and archaeometry. The main elements analyzed were H, C, N, O, S, Sr and Pb. For isotope-data interpretation, statistical methods appear to depend essentially on the field, the objectives of the study and the number of parameters. They were not often stated explicitly because the studies were exploratory and aimed primarily at assessing the relevance of the analytical techniques used to identify sources. We critically discuss the adequacy of these methods.
ISSN: 0165-9936

hal-00687383
https://hal.archives-ouvertes.fr/hal-00687383

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Displacement-length data from dilatant fractures (joints, veins, igneous dikes) and several varieties of deformation bands were analyzed statistically to investigate the applicability of mechanical models proposed for their formation. All 17 datasets are generally consistent with equilibrium or long-term power-law slopes on the displacement-length diagram of either 1.0 or 0.5. Similar to many faults, disaggregation deformation bands are consistent with a power-law scaling relation having a slope of approximately c = 1, implying a linear dependence of maximum displacement and discontinuity length (Dmax = γL). In contrast, dilatant fractures, cataclastic deformation bands, and shear-enhanced compaction bands are consistent with a power-law scaling relation with a slope of approximately c = 0.5, implying a dependence of maximum displacement on the square root of length (Dmax = αL1/2). The scaling relations represent an average, or long-term equilibrium outcome of deformation for conditions such as length-scale, time-scale, temperature, chemistry, and an effectively homogeneous far-field stress field, allowing for variations such as rapid and/or localized behaviors. The displacement-length scaling of these geologic structures follows systematic relationships that provide information on host-rock properties and the physics of fracture and deformation-band propagation.
ISSN: 0191-8141

hal-00818130
https://hal.archives-ouvertes.fr/hal-00818130
DOI : 10.1016/j.jsg.2012.12.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
Determination of the membrane seal capacity of deformation bands is critical for managing geologic reservoirs in porous sandstones. In this study, we have analyzed a cataclastic shear-band network developed in uncemented porous sandstone in Provence, France. Geometrical analyses of the bands show significant differences between three types of bands (single strand, multistrand, and band cluster), sorted by their number of strands, their amount of shear displacement, and their thicknesses. At the microscopic scale, the image-analysis porosities and the grain-size distributions allow definition of three different types of microstructural deformation: damage zone, protocataclastic, and cataclastic. Whereas damage zone and protocataclastic deformations are observed in each type of band, cataclastic strands are observed in clusters and, sometimes, in multistrands. Cataclastic strands are characterized by a porosity reduction of 10 to 25% and a permeability reduction of three to five orders of magnitude compared to the host rock. Field observations of iron hydroxide precipitations around the bands suggest that cataclastic strands were membrane seals to water flow under vadose condition. This study therefore highlights the importance of the degree of cataclasis in shear bands as membrane seals to subsurface fluid flows in sandstone reservoirs.
ISSN: 0149-1423

hal-00766557
https://hal.archives-ouvertes.fr/hal-00766557
DOI : 10.1306/04051211097

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use digital elevation models and satellite imagery data completed with field observations to develop an integrated morphotectonic analysis of the anomalous topography of the Central Cordillera of Patagonia between 46 degrees S and 48 degrees S, in a region overlying subducted segments of the Chile Spreading Ridge. This region shows a number of peculiar features, not expected in a normal subduction-related belt located away from a buried spreading center. First, it is characterized by overall short-wavelength topography and highly contrasted reliefs, typical of deeply incised young mountain belts, but surprisingly, also by an average very low elevation of similar to 900 m. Second, the Cordillera lacks central high reliefs; instead, there is a central, depressed domain with average low slope gradients including the deepest point of the study area (300 m below sea level in the bottom of Lake General Carrera/Buenos Aires). This depressed area is flanked by western and eastern regions of higher elevation having opposite general slope dips. To the east, the central Patagonian Cordillera is now separated from the flat plains of the Pampean domain (representing its former piedmont) and several elevated basaltic plateaus (mesetas) by 160 degrees N-180 degrees N trending morphotectonic corridors and the western border scarps of the mesetas. These scarps correspond to neotectonic features controlled by recent vertical faults, mostly active after 3 Ma. Remnants of a former peneplain, the Avellanos surface, are widespread within the entire Cordilleran region. From geological evidence, this peneplain formed between 15 and 4 Ma and was connected originally with the mesetas domain and now is dissected by these corridors. It is shown that a negative inversion related to extensional and strike-slip faulting occurred in the frontal region of the Cordillera at 3 Ma synchronously with the emplacement of magmatic products. Timing of the extensional deformation in central Patagonia is concomitant with the migration at depth of different segments of the South Chile Ridge, which entered the trench at 6 and 3 Ma, respectively, and the consequent opening of a slab window allows asthenospheric hot mantle to reach lithospheric regions. Finally, migration of segments of the Chile Spreading Ridge since 6 Ma triggered regional uplift of the Cordillera followed by limited extension in relation with increased thermal weakening of the crust.
ISSN: 0278-7407

hal-00486334
https://hal.archives-ouvertes.fr/hal-00486334
DOI : 10.1029/2009TC002453

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Geomorphic landscape features have been suggested as indicators of forest diversity. However, their explanatory power has not yet been explicitly tested at a regional scale in tropical rainforest. We used forest inventories conducted according to a stratified sampling design (3,132 plots in 111 transects at 33 sites) and holistic multi-scale geomorphological mapping derived from a Shuttle Radar Topography Mission digital elevation model to describe and explain spatial patterns in floristic composition across French Guiana (80,000 km2). We measured and identified 123,906 trees with DBH C20 cm and used constrained and unconstrained ordinations to analyze variations in the abundance of 221 taxa and 51 families. Variance partitioning and variograms were used to detect spatial patterns in species composition, compare the explanatory power of spatial and environmentalfactors, and select the variables that best explain forest composition. Strong floristic patterns corresponded to a major latitudinal gradient and significant sub-regional floristic structure. Geomorphological landscapes shaped by historic climate fluctuations and major geological events successfully captured these patterns and explained the variation in abundance of 80 taxa, corresponding to 65 % of the inventoried trees. Our findings suggest that long-term forest dynamics are under substantial ‘‘geomorphographic control’’. A geomorphological perspective on landscapes that incorporates current and past environmental filters and historical biogeographical processes could thus be used more systematically in tropical regions for regional planning and forest conservation
ISSN: 0960-3115

hal-01204224
https://hal.archives-ouvertes.fr/hal-01204224
DOI : 10.1007/s10531-014-0854-8
PRODINRA : 295767