Éditeur(s) : HAL CCSD
Résumé : International audience
This paper presents a microfluidic system, characterizing the red blood cell (RBC) deformability through its transit time in a microchannel, which dimensions reproducing blood microcirculation capillary. Electrodes are integrated within the microchannel for electrical measurements. The transit time is measured with the electrical blockade produced when the RBC squeezes in the microchannel (d = 5 μm diameter, while the cell diameter is 8 μm). In order todetermine most suitable electrical frequency range for the voltage applied to excitation electrodes, FEM numerical simulation of the bioimpedance is achieved and presented in this paper. We investigated the frequency response of the bioimpedance taking into account the electrode polarization, the dielectric properties of the medium, a single shell model for RBC and finally the RBC position within the microchannel.
Eurosensors
Paris, France

hal-01592142
https://hal.archives-ouvertes.fr/hal-01592142
DOI : 10.3390/proceedings1040517

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In this paper we investigate finite-frequency effects in crustal tomography. We developed an inversion procedure based on an exact numerical computation of the sensitivity kernels. In this approach we compute the 3D travel-time sensitivity kernels by using (1) graph theory and an additional bending to estimate accurately both rays and travel-times between source/receiver and diffraction points and (2) paraxial ray theory to estimate the amplitude along theses rays. We invert both the velocity and the hypocentre parameters, using these so-called banana-doughnut kernels and the LSQR iterative solver. We compare the ray-theoretical and the finite-frequency tomography to image the intermediate structures beneath the Gulf of Corinth (Greece), which has long been recognized as the most active continental rifting zone in the Mediterranean region. Our dataset consists of 451 local events with 9233 P- firstarrival times recorded in the western part of the Gulf (Aigion area) in the framework of the 3F-Corinth European project. Previous tomographic images showed a complex velocity crustal model and a low-dip surface that may accommodate the deformation. Accurate velocity models will help to better constrain the rifting process, which is still a subject of debate. The main results of this study show that finite-frequency tomography improves crustal tomographic images by providing better resolved images of the 3D complicated velocity structure. Because the kernels spread the information over a volume, finite-frequency tomography results in a sharpening of layer boundaries as we observed for the shallower part of the crust (down to 5 km depth) beneath the Gulf of Corinth.
ISSN: 0016-8025

insu-00354702
https://hal-insu.archives-ouvertes.fr/insu-00354702
DOI : 10.1111/j.1365-2478.2007.00683.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We analyse temporal variations of gravity measured in southern Taiwan since November 2006 at 10 sites using absolute gravimeters and, since November 2008, at 70 sites using a relative gravimeter. We describe and apply methods to interpret the gravity changes in terms of local hydrological processes and vertical ground motions. The effect of land water is computed from local rainfall data and a model of rain accumulation and discharge in the ground. The effect of the vertical motions of the ground is estimated using time-series of permanent Global Positioning System (GPS) stations and the theoretical gravity to height ratio of −2 μGal cm−1. Unexpectedly, Morakot typhoon (2009 August), the strongest typhoon in Taiwan in 50 yr, was responsible for the highest gravity changes. Morakot triggered numerous large landslides and debris flow deposits. Their thicknesses are estimated from the gravity changes (up to ∼280 μGal) along with field observations and satellite images.
ISSN: 0956-540X

hal-00768216
https://hal.archives-ouvertes.fr/hal-00768216
DOI : 10.1093/gji/ggs019

Éditeur(s) : HAL CCSD
Résumé : National audience
The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100°C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150°C and 350°C isotherms) increases from about 80 km, north of 16°N, to 230 km, at 13°N. The maximum width (between the 100°C and 450°C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
Bulletin Société Géologique de France

insu-00814056
https://hal-insu.archives-ouvertes.fr/insu-00814056
DOI : 10.2113/gssgfbull.184.1-2.47

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
The budding yeast Saccharomyces cerevisiae is a major model organism for important biological processes such as mitotic growth and meiotic development, it can be a human pathogen, and it is widely used in the food-, and biotechnology industries. Consequently, the genomes of numerous strains have been sequenced and a very large amount of RNA profiling data is available. Moreover, it has recently become possible to quantitatively analyze the entire yeast proteome; however, efficient and cost-effective high-throughput protein profiling remains a challenge. We report here a new approach to direct and label-free large-scale yeast protein identification using a tandem buffer system for protein extraction, two-step protein prefractionation and enzymatic digestion, and detection of peptides by iterative mass spectrometry. Our profiling study of diploid cells undergoing rapid mitotic growth identified 86% of the known proteins and its output was found to be widely concordant with genome-wide mRNA concentrations and DNA variations between yeast strains. This paves the way for comprehensive and straightforward yeast proteome profiling across a wide variety of experimental conditions.
ISSN: 1535-9476

hal-00682837
https://hal.archives-ouvertes.fr/hal-00682837
DOI : 10.1074/mcp.M111.012682
PUBMED : 21997732

Éditeur(s) : HAL CCSD PeerJ
Résumé : International audience
Background: Heterocyclic aromatic amines (HAA) are environmental and food contaminants that are potentially carcinogenic for humans. 2-Amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) is one of the most abundant HAA formed in cooked meat. MeIQx is metabolized by cytochrome P450 1A2 in the human liver into detoxificated and bioactivated products. Once bioactivated, MeIQx metabolites can lead to DNA adduct formation responsible for further genome instability.Methods: Using a computational approach, we developed a numerical model for MeIQx metabolism in the liver that predicts the MeIQx biotransformation into detoxification or bioactivation pathways according to the concentration of MeIQx.Results: Our results demonstrate that 1) the detoxification pathway predominates, 2) the ratio between detoxification and bioactivation pathways is not linear and shows a maximum at 10µM of MeIQx in hepatocyte cell models, 3) CYP1A2 is a key enzyme in the system that regulates the balance between bioactivation and detoxification. Our analysis suggests that such a ratio could be considered as an indicator of MeIQx genotoxicity at a low concentration of MeIQx.Conclusions: Our model permits the investigation of the balance between bioactivation (i.e. DNA adduct formation pathway through the prediction of potential genotoxic compounds) and detoxification of MeIQx in order to predict the behaviour of this environmental contaminant in the human liver. It highlights the importance of complex regulations of enzyme competitions that should be taken into account in any further multi-organ models.
ISSN: 2167-8359

hal-01575579
https://hal.inria.fr/hal-01575579
PUBMED : 28879062
DOI : 10.7717/peerj.3703

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics. We herein focus on "subduction infancy", that is the first ~1-5 My immediately following subduction nucleation, when a newly born slab penetrates into the upper plate mantle and heats up. The only remnants of this critical yet elusive geodynamic step are thin metamorphic soles, commonly found beneath pristine, 100-1000 km long portions of oceanic lithosphere emplaced on continents (i.e., ophiolites).Through the (i) worldwide compilation of pressure-temperature conditions of metamorphic sole formation augmented by pseudosection thermodynamic modeling, (ii) calculations of the viscosity of materials along the plate interface and (iii) generic numerical thermal models, we provide a conceptual model of dynamic plate interface processes during subduction infancy (and initiation s.l.).We show in particular how major rheological switches across the subduction interface control slab penetration, and the formation of metamorphic soles. Due to the downward progression of hydration and weakening of the mantle wedge with cooling, the lower plate (basalt, sediment) and the upper plate (mantle wedge) rheologies equalize and switch over a restricted temperature-time-depth interval (e.g., at ~800°C and ~1 GPa, during 0.1-2 My, for high-temperature metamorphic sole formation). These switches result in episodes of maximum interplate mechanical coupling, thereby slicing the top of the slab and welding pieces (basalt, sediment) to the base of the mantle wedge. Similar mechanical processes likely apply for the later, deeper accretion and exhumation of high-temperature oceanic eclogites in serpentinite mélanges, or for the accretion of larger tectonic slices.This model provides constraints on the effective rheologies of the crust and mantle and general understanding, at both rock and plate scale, for accretion processes and early slab dynamics.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242103
https://hal-insu.archives-ouvertes.fr/insu-01242103

Éditeur(s) : ESA Publication
Résumé : Satellite remote sensing has emerged as an essential and necessary observing system to acquire global information about the state of the ocean. Complemented with in situ observing networks, the ultimate goals are to be able to make accurate estimates of selected key sets of geophysical variables, with the intention of either making operational predictions across time and spatial boundaries, or advancing fundamental knowledge through development of empirical relationships and theoretical models. For satellite oceanography, improvements are then constantly being sought in our understandings of the geophysical processes, the sensor physics, the electromagnetic and microwave properties and interactions at the complex air-sea interface. Challenges appear as unlimited as the variety of sea surface dynamics and boundary layer meteorological conditions with their broad range of spatial and temporal scales across the globe. To face these challenges, numerous efforts took places over the passed decade to build an ever-increasing quality, quantity, duration and integration of ocean observations. In parallel, simulation capabilities largely improved. All these efforts are then all critically calling for improved methodologies to better structure the wealth of information that is made readily accessible. This latter aspect is a very demanding new component for future multidisciplinary scientific research. Major innovations to consolidate sensor data repositories, to automate tailored queries, to extract, reveal and quantify relationships will then closely associate computer science developments and applied statistics with comprehensive theoretical and experimental thematic studies.
Proceedings of OceanObs'09: Sustained Ocean Observations and Information for Society (ESA Publication), 2010

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00029/14046/11241.pdf
DOI:10.5270/OceanObs09.pp.12
http://archimer.ifremer.fr/doc/00029/14046/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : We study the Africa-Iberia plate boundary in the vicinity of Gibraltar. Numerous models have been proposed for that region throughout the last decades, proposing mechanisms that range widely from continental delamination, convective removal, to subduction of oceanic lithosphere. To better constrain upper-mantle structure under the region, we study waveforms of P-waves that traverse the Alboran Sea region between Spain and Morocco. These show dispersive behavior, which, together with early arrival times, confirms the presence of an anomalous upper mantle structure under the Alboran Sea. The dispersion is consistent with that expected from subducted lithosphere. Waveforms of body waves therefore provide a way to better constrain the elusive mantle structure and dynamics of the Alboran Sea region
ISSN: 0094-8276

hal-00407670
https://hal.archives-ouvertes.fr/hal-00407670
DOI : 10.1029/2007GL030964

Résumé : In this study, we describe the dynamics of an equatorial river plume using a numerical model (NEMO). The Congo river parameters are used.
Ce rapport étudie la dynamique d'un panache fluvial en zone équatoriale à partir de simulations numériques idéalisées (code NEMO). Les paramètres du fleuve Congo (2ème fleuve mondial par le débit) sont utilisés.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00089/20042/17683.pdf
http://archimer.ifremer.fr/doc/00089/20042/

Éditeur(s) : HAL CCSD
Résumé : International audience
The increasing development of world trade has promoted the spread of diseases. Recent events, like the H1N1 outbreak and spread, have confirmed this tendency. Everyone could observe that this kind of infectious disease often has the ability to cross countries borders and spread rapidly. Preventing, monitoring and controlling the outbreak of these diseases have appeared to be a public health problem of primary importance for years. However, although numerous works have been conducted in order to understand and study epidemics, this subject remains a topical issue because of the complexity of the phenomena. In this paper, we present new opportunities offered by the field of social networks for understanding the spread of infectious diseases. This work focuses both on techniques already used in epidemiology, and very recent works in social network analysis that open new perspectives. We give an overview of methods currently used to model and study the spread of diseases and future directions that the social network approach allows to glimpse.
2011 Fifth International Conference on Research Challenges in Information Science (RCIS)
Gosier, Guadeloupe

hal-00624364
https://hal.archives-ouvertes.fr/hal-00624364
DOI : 10.1109/RCIS.2011.6006866

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The Convective and Orographically-driven Precipitation Study (COPS) carried out in summer 2007 over northeastern France and southwestern Germany provided a fairly comprehensive description of the low-troposphere water-vapour field, thanks in particular to the deployment of two airborne differential absorption lidar systems. These lidar observations were assimilated using the 3D-Var assimilation system of the Application of Research to Operations at MEsoscale (AROME) numerical weather prediction mesoscale model. The assimilation was carried out for the period 4 July-3 August by running a three-hour forward intermittent assimilation cycle. First, the impact of the lidar observations was assessed by comparing the analyses with a set of more than 200 independent soundings. The lidar observations were found to have a positive impact on the analyses by reducing the dry bias in the first 500 m above ground level and by diminishing the root-mean-square error by roughly 15% in the first km. Then the impact of the lidar observations was assessed by comparing the precipitation forecasts (obtained with and without the lidar observations for the period 15 July-2 August) with the gridded precipitation observations provided by the Vienna Enhanced Resolution Analysis. In general, the impact was found to be positive but not significant for the 24 h precipitation and positive and significant for the 6 h precipitation, with an improvement lasting up to 24 h. Some selected case studies show that the improvement was obtained through a better depiction of convection initiation or through a more accurate positioning of the precipitation systems
ISSN: 0035-9009

hal-00659497
https://hal.archives-ouvertes.fr/hal-00659497
DOI : 10.1002/qj.1864

Éditeur(s) : HAL CCSD
Résumé : International audience
Energy is a critical enabler. In tropical countries, access to modern electricity is vital to reducing poverty and improving health, increasing productivity and promoting economic growth. However, the International Energy Agency reported in 2015 more than 1.2 billion people still did not have access to electricity in 2013, around 80% of them live in developing and tropical countries. Then, the same agency report also in 2016 around 6.5 million premature deaths each year can be attributed to air pollution. Therefore, it is time to support appropriate renewable energy developments, particularly the river hydrokinetic developments seems to be a better solution in tropics because of large and powerful rivers in these areas.In French Guiana, 35% of the inland populations are still not connected to the electrical grid (Région Guyane, 2012). This could be ascribed to the fact that extending grid wires hundreds of kilometers through difficult terrain and thick jungles just to serve a small remote village is economically unviable initiative (Ajan et al., 2003; Anyi et al., 2010). As an alternative, French Guiana and most of the tropical countries resort to diesel-powered generators which requires significant imports of expensive fuel, difficult to bring into remote areas (Région Guyane, 2012).This works proposes guidelines to estimate river hydrokinetic fluxes in the vicinity of remote communities in tropics. The method is applied to identify and characterise potential sites along an important reach of the Maroni river in French Guiana. First, a novel method to carry out river terrain elevation model is presented and some results about the Maroni river are reported. It begins from how to conduct ADCP survey, which corrections on them should be made and ends up by interpolating bathymetry over curvilinear profiles which handle the flow lines. That approach involves how mutli-source data (sparse ADCP-cross profiles, incomplete LiDAR tiles and hydroligic data) are merged and combined to estimate local cross section shape, maximum water depth and carry out cross profile in ungauged sites.This is followed by a deep characterisation about time-evolution of hydrokinetic fluxes field in the areas of interest by implementation of a full 2D hydrodynamic model (TELEMAC2D) over an important reach of the Maroni river. To optimise computational cost, river sections outside the areas of interest are modelled as a porous media where only the flows variables up and down stream must fulfil the field data.
CAS
Deshaies, Guadeloupe

hal-01514240
https://hal.archives-ouvertes.fr/hal-01514240

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Tilt fluctuations can potentially reflect the response of hydrosystems to important rainfall. In this context, long baseline tiltmeters have been installed in an underground tunnel penetrating the Fontaine de Vaucluse karst to study the medium deformation related to solicitations exerted by water infiltrating the hydrosystem. The instruments monitor the tilt as well as its spatial variation. Northward tilts reaching a 1 μrad amplitude are observed consecutively to rainfalls. The tilt amplitude is highly correlated with the Fontaine de Vaucluse outlet flow fluctuations. The measured tilt signal is also relatively homogeneous over a 150 m length. Different types of structure likely to produce such observations are tested in order to identify their location with respect to the tiltmeters, their dimension as well as the amount of water level variation in the structure. Following rainfalls, the infiltration of water modifies the pore pressure, inducing a medium deformation. The hypothesis of an homogeneous surface loading on the Vaucluse plateau is first refuted since the related tilt is much lower than the one measured. The water supplied by rainfalls has to accumulate in discontinuities in order to generate a higher tilt. So, the deformation related to a pressure exerted on a fracture filled by water is assessed. A first study reveals the interest of the tilt homogeneity information that constrains strongly the fracture properties. Thus, the fracture must be located at a distance more than a few hundreds metres from the tiltmeters in order to produce a tilt homogeneous in space. If the fracture is initially dry, it must also be filled on a height higher than 150 m consecutive to a rainfall in order to generate a tilt amplitude in the same magnitude as the one measured. Then, we explore the influence of water level variations on the tilt produced by a fracture located at the interface between the saturated and unsaturated zones, which are thereby permanently flooded. Since several parameters of that model satisfactorily explain the field observations, we discuss how simultaneous geodetical observations could provide complementary information that would further constrain the geometry of the structure at the origin of the medium deformation.
ISSN: 0956-540X

insu-01408482
https://hal-insu.archives-ouvertes.fr/insu-01408482
https://hal-insu.archives-ouvertes.fr/insu-01408482/document
https://hal-insu.archives-ouvertes.fr/insu-01408482/file/Lesparre-2017.pdf
DOI : 10.1093/gji/ggw446

Éditeur(s) : HAL CCSD Ecological Society of America
Résumé : Reliable assessment of fish origin is of critical importance for exploited species, since nursery areas must be identified and protected to maintain recruitment to the adult stock. During the last two decades, otolith chemical signatures (or "fingerprints") have been increasingly used as tools to discriminate between coastal habitats. However, correct assessment of fish origin from otolith fingerprints depends on various environmental and methodological parameters, including the choice of the statistical method used to assign fish to unknown origin. Among the available methods of classification, Linear Discriminant Analysis (LDA) is the most frequently used, although it assumes data are multivariate normal with homogeneous within-group dispersions, conditions that are not always met by otolith chemical data, even after transformation. Other less constrained classification methods are available, but there is a current lack of comparative analysis in applications to otolith microchemistry. Here, we assessed stock identification accuracy for four classification methods (LDA, Quadratic Discriminant Analysis [QDA], Random Forests [RF], and Artificial Neural Networks [ANN]), through the use of three distinct data sets. In each case, all possible combinations of chemical elements were examined to identify the elements to be used for optimal accuracy in fish assignment to their actual origin. Our study shows that accuracy differs according to the model and the number of elements considered. Best combinations did not include all the elements measured, and it was not possible to define an ad hoc multielement combination for accurate site discrimination. Among all the models tested, RF and ANN performed best, especially for complex data sets (e. g., with numerous fish species and/or chemical elements involved). However, for these data, RF was less time-consuming and more interpretable than ANN, and far more efficient and less demanding in terms of assumptions than LDA or QDA. Therefore, when LDA and QDA assumptions cannot be reached, the use of machine learning methods, such as RF, should be preferred for stock assessment and nursery identification based on otolith microchemistry, especially when data set include multispecific otolith signatures and/or many chemical elements.
ISSN: 1051-0761

hal-00644549
https://hal.archives-ouvertes.fr/hal-00644549
DOI : 10.1890/09-1887.1

Éditeur(s) : HAL CCSD
Résumé : In the bay of Aigues-Mortes, the managers of the co astal cities try to preserve the socio-economic and patrimonial stakes against the coastal hazards, such as contamination, storm surge and erosion. In this context, a massive beach nourishment of sand (1 million of m3 for 10km of coastline) was made at the beginning of year 2008 to reduce erosion. The REPBAM project (REchargements et Panaches sédiment aires dans la Baie d'Aigues-Mortes) aims to qualify and quantify by in-situ measurements and numerical modelling: 1. the geomorphological evolution of this modified coast and 2. the impact of the sediment's resuspension on the coastal ecosystems, in particular the one of the Posidonia oceanica seagrass. A numerical modelling "wave/current/sediment" is first implemented for December 2008. Nested and curvilinear grids allow a very high resolution for the beach area but also include the inner shelf where the seagrasses are located. Hydrodynamic and topo-bathymetric measurements were acquired from January to May 2012. Model and measurements results show the same trends during storms: strong currents, seaward migrationof the innerbar, sediment resuspension and turbid on the inner shelf.
Coastal Dynamics 2013
Arcachon, France

hal-00908082
https://hal.archives-ouvertes.fr/hal-00908082

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Due to shallow penetration of millimeter waves (MMW) and convection in liquid medium surrounding cells, the problem of accurate assessment of local MMW heating in in vitro experiments remains unsolved. Conventional dosimetric MMW techniques, such as infrared imaging or fiber optic (FO) sensors, face several inherent limits. Here we propose a methodology for accurate local temperature measurement and subsequent specific absorption rate (SAR) retrieval using microscale thermocouples (TC). SAR was retrieved by fitting the measured initial temperature rise to the numerical solution of an equivalent thermal model. It was found that the accuracy of temperature measurement depends on thermosensor size, that is, the smaller TC, the more accurate the temperature measurement. SAR determined using TC with lead diameters of 25 and 75m demonstrated 98.5% and 80.4% match with computed SAR, respectively. However, both TC provided the same temperature rises in long run (>10min). FO probe failed to measure adequately local heating both for short and long exposures due to the relatively large size of the probe sensor (400m) and time constant (0.6s). Calculated SAR in the cell monolayer was almost two times lower than that in the surrounding liquid. It was shown that the impact of the cell monolayer on heating due to its small thickness (5 to 10m) can be considered as negligible. Moreover, we demonstrated the possibility of accurate measurement of MMW-induced thermal pulses (up to 10 degrees C) using 25m TC. Bioelectromagnetics. 38:11-21, 2017. (c) 2016 Wiley Periodicals, Inc.
ISSN: 0197-8462

hal-01436768
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01436768
DOI : 10.1002/bem.21999
PUBMED : 27571392

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction processes play a major role in plate tectonics and the subsequent geological evolution of Earth. This special issue focuses on ongoing research in subduction dynamics to a large extent (oceanic subduction, continental subduction, obduction…) for both past and active subduction zones and into mountain building processes and the early evolution of orogens. It puts together various approaches combining geophysics (imaging of subduction zones), petrology/geochemistry (metamorphic analysis of HP-UHP rocks, fluid geochemistry and magmatic signal, geochronology), seismology and geodesy (present-day evolution of subduction zones, active tectonics), structural geology (structure and evolution of mountain belts), and numerical modelling to provide a full spectrum of tools that can be used to constrain the nature and evolution of subduction processes and orogeny. Studies presented in this special issue range from the long-term (orogenic cycle) to short-term (seismic cycle).
ISSN: 0264-3707

insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985/document
https://hal-insu.archives-ouvertes.fr/insu-01287985/file/rolland-2016.pdf
DOI : 10.1016/j.jog.2016.03.006