Éditeur(s) : Université des Antilles Études caribéennes
Résumé : El desbordamiento ocasionado por el modelo desarrollista de nuestra economía dio lugar a que el gobierno canario promoviera el Decreto (4/2001) para formular las Directrices de Ordenación General y del Turismo por entender que el territorio y los recursos naturales, en general, y la actividad turística, en particular, precisaban de una acción que articulase la orientación del desarrollo insular hacia un modelo sostenible. Se acompañó esa intervención con una serie de medidas cautelares tendentes a congelar el crecimiento y suspender el otorgamiento de licencias para la creación de nuevos establecimientos turísticos alojativos. Poco después, el ejecutivo canario emitió el Decreto 126/2001 para contener el crecimiento, y, finalmente, el Parlamento aprueba y pone en vigor la Ley de Medidas Urgentes en Materia de Ordenación del Territorio y del Turismo de Canarias (julio, 2001) para regular las condiciones que deben reunir los establecimientos de la modalidad hotelera con la máxima categoría. Por último, los diputados regionales dan el visto bueno a la Ley 19/2003 de Directrices de Ordenación General y las Directrices de Ordenación del Turismo de Canarias.
Confronté à une surfréquentation touristique, le Gouvernement local des Îles Canaries a publié un Arrêt (4/2001) qui reformule les Orientations Générales du Territoire et du Tourisme. L’objectif est de s’entendre sur les bases d’un modèle de développement insulaire soutenable, en mettant l’accent sur la gestion des ressources naturelles en général et le tourisme plus particulièrement. Cet Arrêt a été accompagné de normes dont l’objectif est de limiter la construction de nouveaux bâtiments hôteliers. Peu après, le Gouvernement a publié l’Arrêt 126/2001 qui limitait le développement touristique. Le Parlement adopta un autre Arrêt, la «Ley de Medidas Urgentes en Materia de Ordenación del Territorio y del Turismo de Canarias » (juillet 2001) qui détermine les conditions exigées aux établissements hôteliers de plus haute catégorie. Le Parlement donne aussi son accord à l’Arrêt 19/2003, «Directrices de Ordenación General y Directrices de Ordenación del Turismo de Canarias ».
Faced with excesses tourism, the local government of the Canary Islands issued a judgement (4 / 2001), which reformulates General Guidelines of Territory and Tourism. The aim is to set up the basis of a model of sustainable island development, with emphasis on natural resource management in general and tourism in particular. This decision was accompanied by standards whose objective is to limit the construction of new buildings for hotels. Shortly thereafter, the Government issued the ruling 126/2001 which limited the development of tourism. Parliament adopted another decree, "Ley de Medidas Urgent en Materia de Ordenación del Territorio y del Turismo de Canarias" (July 2001) which determines the conditions required for hotels higher category. The Parliament also gives its agreement to stop 19/2003, "Directrices de Ordenación General y Directrices de Ordenación del Turismo de Canarias."
Canaries

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.1232
http://journals.openedition.org/etudescaribeennes/1232

Éditeur(s) : HAL CCSD InTech
Résumé : Available from: http://www.intechopen.com/books/evaporation-condensation-and-heat-transfer/heat-transfer-in-buildings-application-to-solar-air-collector-and-trombe-wall-design
International audience
The aim of this paper is to briefly recall heat transfer modes and explain their integration within a software dedicated to building simulation (CODYRUN). Detailed elements of the validation of this software are presented and two applications are finally discussed. One concerns the modeling of a flat plate air collector and the second focuses on the modeling of Trombe solar walls. In each case, detailed modeling of heat transfer allows precise understanding of thermal and energetic behavior of the studied structures. Recent decades have seen a proliferation of tools for building thermal simulation. These applications cover a wide spectrum from very simplified steady state models to dynamic simulation ones, including computational fluid dynamics modules (Clarke, 2001). These tools are widely available in design offices and engineering firms. They are often used for the design of HVAC systems and still subject to detailed research, particularly with respect to the integration of new fields (specific insulation materials, lighting, pollutants transport, etc.). Available from: http://www.intechopen.com/books/evaporation-condensation-and-heat-transfer/heat-transfer-in-buildings-application-to-solar-air-collector-and-trombe-wall-design
Evaporation, condensation and heat transfer

Droits : info:eu-repo/semantics/OpenAccess
ISBN : 978-953-307-583-9
hal-00767482
https://hal.archives-ouvertes.fr/hal-00767482
https://hal.archives-ouvertes.fr/hal-00767482/document
https://hal.archives-ouvertes.fr/hal-00767482/file/InTecSubmitted.pdf

Éditeur(s) : Elsevier Science Bv
Résumé : Mechanisms controlling the transfer and retention of silicon (Si) along continental margins are poorly understood, but play a major role in the functioning of coastal ecosystems and the oceanic biological pump of carbon. Deep-sea fans are well recognized as carbon sink spots, but we lack knowledge about the importance of the fans in the global Si cycle. Here, we provide a first estimate of the role played by the Congo deep-sea fan, one of the biggest in the world, in the Si cycle. Sediment cores sampled in the deep-sea fan were analyzed to build a Si mass balance. An exceptionally high accumulation rate of amorphous silica aSiO(2) (2.29 +/- 0.58 mol Si m(-2) y(-1)) was found, due to a high sedimentation rate and the presence of aluminum in the sediments. Although favored by bioirrigation, recycling fluxes remained low (0.3 mol Si m(-2) y(-1)) and reconstructed input fluxes could only be explained by lateral inputs coming from the canyon. Preliminary calculations show that the rapid transport of aSiO(2) through the canyon and the excellent preservation efficiency in the sediments imply that 50% of aSiO(2) river inputs from the Congo River accumulate annually in the deep-sea fan. Si:C ratios in deep-sea fan sediments were very low (0.2) and only three times as high as those measured in the river itself, which suggests that material from the river and the continental shelf was delivered directly through the canyon, with very little time for Si and C cycle decoupling to take place.
Journal Of Marine Systems (0924-7963) (Elsevier Science Bv), 2015-01 , Vol. 141 , P. 71-79

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00251/36242/35797.pdf
DOI:10.1016/j.jmarsys.2014.07.010
http://archimer.ifremer.fr/doc/00251/36242/

Résumé : The slides were taken on collecting trips sponsored by the William L. Bryant Foundation, where books, music and art indigenous to the regions were gathered. The are organized by geographical location.
Saint Mark's Anglican Church, the Parish Church of Manchester, Jamaica was consecrated in 1820. Architectural elements feature stone construction materials and Gothic details, such as the pointed arch doors and window openings. Two school children are in front of the church, a boy wearing a khaki uniform, riding a bicycle and a Manchester High School girl wearing a green dress with a white shirt. Slide labeled Mandeville Church
Jamaica -- Caribbean region -- Mandeville, Manchester

Droits : All rights to images are held by the respective holding institution. This image is posted publicly for non-profit educational uses, excluding printed publication. For permission to reproduce images and/or for copyright information contact Special Collections & University Archives, University of Central Florida Libraries, Orlando, FL 32816 phone (407) 823-2576, email: speccoll@mail.ucf.edu
CFM1972_01a
http://ufdc.ufl.edu/AA00030965/00001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Various bagasse fibre/cement composites have been prepared, the fibres having a random distribution in the composites. The influence of different parameters on the setting of the composite material has been studied: (1) botanical components of the fibre, (2) thermal or chemical treatment of the fibre, (3) bagasse fibre content and (4) added water percentage. This study shows a retarding effect of lignin on the setting of the composite, for small amount of heat-treated bagasse (200 °C) the behaviour of the composite is closely the same as the classical cement or cellulose/cement composite.
ISSN: 0958-9465

hal-00809715
https://hal.univ-antilles.fr/hal-00809715
DOI : 10.1016/S0958-9465(02)00003-3

Éditeur(s) : Elsevier
Résumé : The study, which is based on repetitive bathymetric surveys, assesses changes and effects of one of the most important floods recorded in the Rhone Delta area: bottom morphology and sediment distribution in the Rhone outlet after the December 2003 flood are discussed by comparison between Digital Terrain maps (DTMs) of November 2003 and January 2004. The post-flood morphology shows that the whole of the system is active, mainly in the east. The channel of the Rhbne has been hollowed out on the left bank by more than 5 m, the eastern coast of the mouth has retreated 400 m, the mouth-bar has prograded 200 m and the slope of the delta front has increased by 0.19. The overlay of pre- and post-flood DTMs makes it possible to estimate the total volume deposited in the [0 to -20 m] zone as +7.8 X 10(6) m(3) (i.e. 0.88 m(3) m(-2)), which corresponds to 4 X 10(6) t of sediment. These values are compared with the average annual volume of 0.47 X 10(6) m(3) yr(-1) of sediment deposited in this zone between 1995 and 2003, as well as the average sediment load estimated at the Arles station (50 km upstream) for this flood event (3.1 x 10(6) t to 5.3 x 10(6) t). The acquisition of bathymetric measurements immediately before and after a major flood allows more than a simple morphological description; in addition, an analysis of the solid load transfer processes towards the prodelta is achievable. Three mechanisms are highlighted. Most of the material eroded in the channel and supplied to the delta front corresponds to fine sediment that drape homogeneously over the pre-flood morphology of the delta front. The transit of the coarsest sediment (primarily sand) is slowed down in the channel of the Rh6ne: this sediment builds up in relatively small areas, leading to the formation of gullies on the prodelta slope. The gullies have fixed positions and disappear gradually towards the west, following the progressive migration of the active band towards the east. These old features are not reactivated by floods occurring after their formation. During the flood, only a small volume of coarse sediment bypasses through the gullies, and the fine deposits are remobilised rapidly or compacted. Flood input concerns essentially the delta front, which traps 90% of the fluvial solid discharge between 0 and 20 m depth. The coarse prodelta supply is then due mainly to mass movements of unconsolidated material deposited beforehand on the top of the delta front. Consequently, the main nourishment of the prodelta does not occur directly during and/or immediately after a flood event, but is delayed by sediment being temporarily trapped on the delta front.
Marine Geology (0025-3227) (Elsevier), 2006-12 , Vol. 234 , N. 1-4 , P. 159-177

Droits : 2006 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-2304.pdf
DOI:10.1016/j.margeo.2006.09.025
http://archimer.ifremer.fr/doc/00000/2304/

Éditeur(s) : Université de la Rochelle
Résumé : In order to better understand the functioning of the Brouage intertidal mudflat (Marennes- Oléron Basin, France), its carbon-based trophic web has been modelled and analyzed. The foodweb building is based on the 4 step method of Inverse Analysis: 1) conceive an a priori model as the graph of compartments (nodes) between which exist fluxes of material (vertices). These vertices are the unknowns for the problem; 2) gather all the existing knowledge about the ecosystem and translate it into linear equations and inequalities involving the fluxes; 3) complete this set of data by common knowledge on the behaviour of the compartments and translate it into inequalities, 4) solve the obtained linear system under the parsimony principle to find a unique solution vector. The food-web analysis is based on. The first purpose of this work was a methodological one: inverse analysis method has been adapted to consider the seasonal and spatial variability of the temperate ecosystem: two seasons have been coupled in the computation and the area has been divided into three geographical zones along a cross-shore gradient. Hence, two types of physical exchanges are involved: the benthicpelagic ones and the advection ones. Statistical results can also be obtained by coupling Monte Carlo methods to Inverse Analysis. To study the obtained networks, new indices based on Markov Chains take delay into account in describing integrative transfers of material between compartments. This lets emerge the systems' properties that are not obvious at first sight and emphasizes the role of peculiar components. The second purpose was to apply such methods to the Brouage mudflat ecosystem in order to better understand its functioning. As the knowledge and methods evolve, various food webs were computed and analyzed with the help such indices and existing ones. Sensitivity analyses allow to point at the most crucial lacks of knowledge, which can orientate future field research. New data would improve the quality of the model in two ways: one the one hand, they would validate or invalidate the outcomes and on the other hand, they would give useful information to better constrain some of the black boxes and most uncertain fluxes, especially the advection and vertical flows. The main results of the study show a strongly seasonal system in which benthic and pelagic components are linked with intensity. The system is driven by its high local benthic primary production, but also depends on imports from the basin. Each of the 3 geographic zones has a peculiar functioning. The central zone corresponds to the classical description of European intertidal mudflats: very productive, it can feed the other regions. It is a production zone. The upper part is less productive but is fed by the middle one via the water column and can be exploited by shorebirds. It is a degradation zone (material is transformed for less qualitative). The lower part strongly depends on the basin imports for its functioning, as the cultivated bivalves act as a pump for pelagic material of which a great part is deposited under the cultivation structures (oyster racks or mussels "bouchots"). It is a transformation zone.
Un double objectif (méthodologique et appliqué) a été visé par une modélisation du réseau trophique de la vasière de Brouage (Bassin de Marennes Oléron, France) à l'aide de l'analyse inverse, et son étude à l'aide de l'analyse des réseaux. L'Analyse Inverse permet en effet de reconstruire l'ensemble du réseau à partir de données éparses, le problème du manque de données étant récurrent en Ecologie. Au plan méthodologique, l'analyse inverse a été adaptée à la prise en compte des caractères saisonnier et spatialement hétérogène d'un écosystème tempéré de zone intertidale : deux saisons ont ainsi été couplées et la vasière a été considérée le long d'un transect perpendiculaire au rivage et divisé en trois zones spatiales. Deux types de flux physiques interviennent donc : les flux verticaux de dépôt et remise en suspension, et les flux d'advection via la colonne d'eau. Des pistes d'amélioration et de nouvelles méthodes sont proposées. Un résultat sous forme statistique peut être obtenu en couplant l'utilisation de méthodes de Monte Carlo à l'analyse inverse pour la construction des réseaux trophiques. Les moyens d'étude des modèles ont été enrichis par la mise au point d'indices issus de la construction de chaînes de Markov et prenant en compte le caractère temporel des transferts de matière entre compartiments. Enfin, la transformation mathématique du modèle statique pour une étude dynamique de la stabilité de l'équilibre décrit est abordée. Plusieurs modèles ont été construits au cours de l'évolution des méthodes et de l'acquisition de connaissances sur le site. Des méthodes d'analyses existantes et d'autres mises au point dans le cadre de cet ouvrage ont été appliquées aux réseaux obtenus afin de faire émerger les propriétés du fonctionnement de la vasière et de souligner le rôle de certains compartiments. Des analyses de sensibilité permettent d'évaluer la robustesse des résultats et d'orienter les recherches futures en mettant en évidence les manques les plus cruciaux. Des données supplémentaires, notamment concernant les foraminifères benthiques, le zooplancton ou les mouvements verticaux du microphytobenthos permettront de fournir de meilleures contraintes et de valider (ou non) les résultats obtenus. Les principaux résultats montrent un système au fort caractère saisonnier dont les compartiments benthiques et pélagiques sont très liés. La production primaire benthique locale est un moteur important, mais qui ne suffirait pas à suppléer l'indispensable importation de matériel détritique. Le découpage de la vasière en trois zones fait apparaître les particularités de chacune. La zone centrale correspond à la description classique des « vasières intertidales européennes » : très productive, elle peut alimenter les autres régions. C'est une zone de production et d'exportation. La partie supérieure est moins productive et reçoit de la matière de la zone de milieu d'estran via la colonne d'eau. Sa production secondaire peut alors être exploitée par les limicoles, nombreux en hiver. C'est une zone de dégradation et d'exportation. Le bas d'estran dépend fortement des importations extérieures, « pompées » par les bivalves cultivés qui sont ainsi directement responsables d'une forte sédimentation sous les structures mytilicoles et ostréicoles. C'est une zone de transformation.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2005/these-2260.pdf
http://archimer.ifremer.fr/doc/00000/2260/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This work is concerned with the study of the tribologic properties of room temperature fluorinated graphite heat-treated under fluorine atmosphere. The fluorinated compounds all present good intrinsic friction properties (friction coefficient in the range 0.05–0.09). The tribologic performances are optimized if the materials present remaining graphitic domains (influenced by the presence of intercalated fluorinated species) whereas the perfluorinated compounds, where the fluorocarbon layers are corrugated (armchair configuration of the saturated carbon rings) present higher friction coefficients. Raman analyses reveal that the friction process induces severe changes in the materials structure especially the partial re-building of graphitic domains in the case of perfluorinated compounds which explains the improvement of μ during the friction tests for these last materials.
ISSN: 1023-8883

hal-00767637
https://hal.archives-ouvertes.fr/hal-00767637
https://hal.archives-ouvertes.fr/hal-00767637/document
https://hal.archives-ouvertes.fr/hal-00767637/file/Delbe_6329.pdf
DOI : 10.1007/s11249-009-9487-6

Éditeur(s) : HAL CCSD
Résumé :  
The main aspects of wood mechanics are approached through the role played by wood as the building material of the tree. The main concepts used by nature: progressive setting up of tree weight and architecture, multifunctional role of wood and adaptability to hazard and long-term evolution, are clarified together with their consequence on the multilayered, anisotropic nature of wood. The technological choices of the plant world as the cellular structure, the use of composite with oriented fibres and hydro-carbonated polymers, as well as the systematic prestressing of every new layer, bear obvious consequences on the type of mechanical behaviour of wood. The local control of the level of prestressing through minor modifications of the cell-wall biosynthesis allows the tree to adapt to conditions of light exploration that will evolve according to time and risk occurrence. This analysis of wood genesis process permits in return to improve our understanding of the mechanical behaviour of the material in relation with the parameters of the microstructure.
Comptes Rendus de l'Académie des Sciences Série 2

hal-01032151
https://hal.archives-ouvertes.fr/hal-01032151
DOI : 10.1016/S1620-7742(01)01380-0

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD
Résumé : International audience
In boundary lubrication regime, friction reduction and antiwear processes are associated to the presence of additives in the lubricating oils or greases. These processes are due to the formation of protective tribofilms resulting from chemical reactions between the additives and the sliding surfaces, in the physico-chemical conditions of the sliding contact. Conventional antiwear additives mainly consist of transition metal organo phosphate or thiophosphates which present a remarkable efficiency in the case of contacts between ferrous alloys. In the case of non reacting surfaces, these additives become inactive. Recently developped lubrication strategies consist in the use of dispersion in oils of nano additives able to build the protective tribofilm in the sliding contact without reaction with the surfaces. Carbon fluorinated phases, due to their lamellar structure and their high chemical stability even at relatively high temperature (400°C) represent interesting candidates as lubricant nano-additives subjected to present friction reduction, anti wear and anti corrosion actions. This work presents the tribologic behaviour of some carbon fluorinated derivatives such as graphite fluorides, fluorinated carbon nanofibers, fluorinated carbon nanodiscs and fluorinated carbon blacks. The influence, on the tribologic performances, of the structure of the initial carbon phases, of the fluorination rate (0
World Tribology Congress 2013
Torino, Italy

Droits : info:eu-repo/semantics/OpenAccess
hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514/document
https://hal.archives-ouvertes.fr/hal-00926514/file/Delbe_9783.pdf
OATAO : 9783

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geochronological studies of samples from continuous crustal sections of fossil intra-oceanic arcs are paramount for determining the precise timing of major processes that took place during the building of an oceanic island-arc crust. In this study, laser ablation ICP-MS U-Pb zircon (and conventional Rb-Sr) analyses pinpoint the timing of major events responsible for crustal growth of the Kohistan paleo-island arc (Northern Pakistan). Inheritance in magmatic rocks is evidence for recycling of intra-arc material and indicates that the Kohistan arc may have formed as early as 135 +/- 4 Ma. One older inherited grain indicates that the arc developed on a young oceanic lithosphere whose remnants include a c. 175 Ma old component. An interesting consequence is that intra-oceanic arc magmas can yield inherited zircons, which can be much older than the arc system itself without requiring recycling back into the mantle by subduction processes. In the case of the Kohistan arc, ante-arc Neotethys oceanic lithosphere was tapped by arc magmas during their way upward into the arc crust. The oldest magmatic ages measured in this study fall in the range 101-102 Ma (100.9 +/- 0.6 and 102.1 +/- 0.4 Ma). This period corresponds to arc build-up and thickening of the arc crust. Leucogranitic melts dated at 89.9 +/- 0.4 Ma and 90.9 +/- 1.0 Ma are considered as produced by dehydration/melting reaction accompanying granulitisation of the thickened lower arc crust. A maximum age for this event is 97.7 +/- 0.7 Ma, the age of emplacement of a garnet meta-tonalite affected by granulite facies metamorphism. Magmatic activity was still ongoing during and after the granulitisation as testified by emplacement of a diorite and a gabbro dated at 89.1 +/- 0.6 and 88.2 +/- 0.9 Ma respectively. The upper part of the metaplutonic sequence contains diorite samples dated at 84.6 +/- 0.5 Ma and 84.3 +/- 0.5 Ma and as young as 81.1 +/- 0.7 Ma. During this period, and based on the present day outcropping sequences, the mean crustal growth rate varied from 32 to 65 km(3)/km/Ma (volume per unit width along the strike of the arc) which is comparable to the range for present day arcs of the Western Pacific region. The correspondence of crustal growth rates observed for present-day island arcs and the good preservation of the crustal section in the Kohistan arc, make this area an exceptional natural laboratory to study arc related processes and to check models of continental crust formation by arc accretion.
ISSN: 0012-821X

hal-00644555
https://hal.archives-ouvertes.fr/hal-00644555
DOI : 10.1016/j.epsl.2011.07.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alpine Corsica consists of a stack of variably metamorphosed units of continental and Tethys-derived rocks. It represents an excellent example of high-pressure (HP) orogenic belt, such as the Western Alps, exposed over a small and accessible area. Compared to the Western Alps, the geology of Alpine Corsica is poorly unraveled. During the 1970s-80s, based on either lithostratigraphic or metamorphic field observations, various classifications of the belt have been proposed, but these classifications have been rarely matched together. Furthermore, through time, the internal complexity of large domains has been progressively left aside in the frame of large-scale geodynamic reconstructions. As a consequence, major open questions on the internal structure of the belt have remained unsolved. Apart from a few local studies, Alpine Corsica has not benefited of modern developments in petrology and basin research. This feature results in several uncertainties when combining lithostratigraphic and metamorphic patterns and, consequently, in the definition of an exhaustive architecture of the belt. In this paper we provide a review on the geology of Alpine Corsica, paying particular attention to the available lithostratigraphic and metamorphic classifications of the metamorphic terranes. These data are completed by a new and exhaustive metamorphic dataset obtained by means of thermometry based on Raman Spectroscopy of Carbonaceous Material (RSCM). This technique provides reliable insights on the peak temperature of the metamorphic history for CM-bearing metasediments. A detailed metamorphic characterization of metasediments, which have been previously largely ignored due to retrogression or to the lack of diagnostic mineralogy, is thus obtained and fruitfully coupled with the available lithostratigraphic data. Nine main tectono-metamorphic units are defined, from subgreenschist (ca. 280-300 °C) to the lawsonite-eclogite-facies (ca. 500-550 °C) condition. These units are homogeneous in metamorphism, laterally continuous and have characteristic lithostratigraphic features. This study also suggests a direct link between the pre-orogenic extensional setting and the present-day compressional structure of Alpine Corsica, indicating that large sections of subducted lithosphere were subducted and exhumed as coherent domains. These features provide important insight on the mechanism of stacking and exhumation of HP rocks, and make Alpine Corsica a unique reference for mountain-building processes in Tethyan-type orogens.
ISSN: 0012-8252

hal-00814433
https://hal.archives-ouvertes.fr/hal-00814433
DOI : 10.1016/j.earscirev.2012.10.003

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The processes active in the deep crust above an oceanic subduction zone during its evolution have been constrained through a detailed geochemical study (major and trace elements and Sr, Nd and Pb isotopes) of representative samples through an 30 km thick exhumed crustal section of the Cretaceous Kohistan oceanic island arc (Northern Pakistan). The use of both trace elements and radiogenic isotopes reveals two distinct geochemical suites (suites A and B) within the JijalPatanKiruKamila (JPKK) complex. Suite A is characterized by a progressive enrichment in Pb-207 and a decrease in Nd-143/Nd-144 with increasing La-N/Sm-N. Suite B has higher Pb-207/Pb-204 and lower Nd-143/Nd-144 ratios with approximately constant La-N/Sm-N. By combining trace elements with different partitioning behaviour it is demonstrated that there is an increasing contribution of the subduction component in the magmas with time. It is also possible to distinguish a slab component imprint carried by aqueous fluids from one corresponding to sediment melts. Intrusive granites are abundant in the upper levels of the JPKK section. All were generated at the arc root level (Jijal crustal section) during dehydration-melting of hornblende-rich plutonic rocks. A three-stage geodynamic model is proposed for the evolution of the arc over a period of 30 Myr. The first stage (117105 Ma) starts with the onset of subduction, which was followed by the building of the volcanic arc. The second stage (10599 Ma to 9691 Ma) corresponds to a major igneous event, which was characterized by abundant magma underplating and granulite-facies metamorphism at the arc base. Recycling of the residualcumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and was probably related to thermo-mechanical erosion of the base of the crust. The last stage (9585 Ma) corresponds to a period of low magmatic activity, which marked the end of the intra-oceanic subduction. This is related to the formation of a cold blanket above the slab surface as a result of thermo-mechanical erosion of the cold walls of the subduction zone (i.e. the upper part of the slab and the base of the overriding plate), and corner flow dragging the cold material into the zone of melt generation. Ultimately, a voluminous magmatic pulse occurred around 85 Ma (forming the Chilas complex), before arccontinent collision.
ISSN: 0022-3530

hal-00420068
https://hal.archives-ouvertes.fr/hal-00420068
DOI : 10.1093/petrology/egp010

Éditeur(s) : George A. Smathers Libraries, University of Florida George A. Smathers Libraries, University of Florida ( Gainesville, FL )
Résumé : The UF Smathers Libraries partner with institutions and scholars to host and preserve digital collections, support scholarly publishing with digital collections, and support digital acquisitions to build shared collections. Clear benefits from partnerships are often supported with minimal costs by leveraging UF’s infrastructure for hosting, preservation, publishing, and acquisition. However, digital collections require ongoing support. In addition to the future “care and feeding,” new collections and projects also require support for various needs which may be one-time, infrequent, or a stable and continuous commitment throughout a project. These needs draw from digital curation and other areas (e.g., bulk ingesting materials, training for partners, liaising for grant proposal development, liaising for collection development and outreach, collaboration on activities related to specific projects as with training and outreach). Because of the immediate demands and ongoing commitments required for partnerships, potential new partnerships with the UF Libraries are reviewed for consideration and possible approval. This document provides background on partnerships with the UF Libraries, considerations for reviewing potential new partnerships for approval, and procedures for establishing new partnerships and ensuring optimal ongoing support.

Droits : [cc0] The author dedicated the work to the Commons by waiving all of his or her rights to the work worldwide under copyright law and all related or neighboring legal rights he or she had in the work, to the extent allowable by law.
http://ufdc.ufl.edu/AA00017119/00036

Résumé : L’incorporation de sous-produits agricoles ou de matériaux naturels dans la matrice cimentaire confère des propriétés intéressantes aux composites élaborés. L’objectif de cette thèse est d’élaborer un matériau pouvant répondre aux exigences mécaniques, thermiques et de durabilité des matériaux de construction en zone tropicale humide. Dans un premier temps, l’activité pouzzolanique d’une pouzzolane naturelle, de cendres de tronc de bambou et de cendres de bagasse de canne à sucre ont été évaluées. L’influence de leur incorporation a été ensuite étudiée sur les propriétés mécaniques et la durabilité des mortiers exposés à des ions chlorures et sulfates. Dans un second temps, l’influence de l’ajout de fibres de bagasse sur les propriétés thermiques et mécaniques des composites a été étudiée en fonction de différents paramètres (teneur en fibres, environnement de vieillissement, type de matrice cimentaire).Les résultats obtenus ont permis de montrer que les matériaux étudiés possèdent une activité pouzzolanique et qu’il est possible de les incorporer au ciment afin de lutter contre la corrosion. De plus, les composites élaborés avec des fibres de bagasse sont plus isolants que ceux élaborés sans fibres. Cependant, du point de vue des propriétés mécaniques, l’incorporation de fibres de bagasse diminue les contraintes à la flexion des composites.
The incorporation of crop wastes or natural materials in the cement matrix confers interesting properties to composites prepared. The aim of this thesis is to develop a material that can reach the mechanical, thermal and durability requirements for building materials in the humid tropical zone. Firstly, pozzolanic activity of a natural pozzolan, bamboo stem and sugar cane bagasse ashes has been determined. Influence of their incorporation on mechanical properties and durability of mortars exposed to chloride and sulphate ions was studied. Secondly, influence of addition of bagasse fibers on thermal and mechanical properties of composites was studied as a function of various parameters (fibers content, curing, type of cement matrix).These results has shown that the materials studied have pozzolanic activity and it is possible to incorporate them into the cement to fight against corrosion. Moreover, composites elaborated with bagasse fibers are more insulating than those elaborated without fibers. However, from the viewpoint of mechanical properties, incorporation of bagasse fibers decreases flexural strength of composites in the present work and under the conditions producing procedures that were adopted.

http://www.theses.fr/2014AGUY0804/document

Éditeur(s) : HAL CCSD
Résumé : International audience
Until the end of the 20th century, heritage was mainly defined in the Caribbean, as in the entire world, by an european conception (linked with the formation of national identities), founded on the value of tangible heritage (rare, ancient objects, monuments and materials) as an historic proof of the value of cultures and peoples. Poets in the Caribbean hardly criticize this evidence that contributed to inferiorized people. Memory and imagination played a central role in the building of a Caribbean cultural identity. Poets tried to show how the common could rise from different patterns, diversity instead of unity, creation instead of fixity. Nevertheless, In the 21st century, frameworks are not available to deal with Caribbean heritage in its diversity (monuments, material, natural and intangible...) and complexity whereas it constitute a challenge for a sustainable society and can play a fundamental role in education as in tourism.
Jusqu'à la fin du XXe siècle, le patrimoine dans la Caraïbe comme ailleurs dans le monde, répondait principalement à une conception européenne (liée à la formation des identités nationales) fondée sur la valeur positive du patrimoine matériel comme preuve historique de la valeur des cultures et des peuples. Les poètes caribéens ont déconstruit ce cadre, instrument de l'infériorisation des individus. La mémoire et l'imagination ont joué un rôle central dans la construction d'une identité culturelle caribéenne. Ils ont tenté de montrer que le commun pouvait émerger de modèles différents, opposant à l'unique, le divers et à la fixité, la création. Cependant, au XXIe siècle, la Caraïbe ne dispose pas d'un cadre pour traiter son patrimoine dans sa diversité (patrimoine matériel, immatériel, naturel) et sa complexité alors que le patrimoine constitue un défi pour le développement durable des sociétés et peut jouer un rôle fondamental dans l'éducation et le tourisme.
Caribbean Studies Association annual conference
Port-au-Prince, Haiti

hal-01612909
https://hal.univ-antilles.fr/hal-01612909

Éditeur(s) : HAL CCSD Elsevier
Résumé : Pb, Hf, Nd and Sr isotopes of basaltic lavas from the two Reunion Island volcanoes are reported in order to examine the origin of the sources feeding these volcanoes and to detect possible changes through time. Samples, chosen to cover the whole lifetime of the two volcanoes (from 2 Ma to present), yield a chemically restricted (compared to 0113 lavas) but complex distribution. Reunion plume isotopic characteristics have been defined on the basis of the composition of uncontaminated shield-building lavas from the Piton de la Fournaise volcano. The average epsilon(Nd), epsilon(Hf), Sr-87/Sr-86 and Pb-206/Pb-204, Pb-207/Pb-204, and Pb-208/Pb-204 isotope ratios calculated for this component are +4.4, +9.1, 0.70411, 18.97, 15.59 and 39.03, respectively. In Pb-Pb isotope space, each volcano defines a distinct linear trend but slight variation are also detected within the various volcanic sequences. The Piton des Neiges volcano yields a distinct and significantly more scattered isotopic distribution than Piton de la Fournaise for both Pb, Hf and Nd isotope tracers. A principal component analysis of the Pb isotope data from Piton de la Fournaise reveals a major contribution of the C and EM-1 components (with a clear Dupal flavor) as main components for the modem Reunion plume. The same components have been identified for Piton des Neiges but with a stronger participation of a depleted mantle component and a weaker EM-1 contribution. The compositional change of the lavas erupted by the Piton des Neiges and Piton de la Fournaise volcanoes is attributed to the impingement of two small-scale blobs of plume material at the base of the Reunion lithosphere. Compared to other hot-spots worldwide, in particular Hawaii and Kerguelen, magmas beneath Reunion are generated from a considerably more homogeneous, compositionally more primitive plume higher in Pb-206. Although shallow-level contamination processes have been locally detected they did not alter significantly the composition of the plume magmas. This is tentatively attributed to mantle dynamics producing small, high-velocity blobs that ascend rapidly through the lithosphere, and to the lack of a well-developed magma chamber at depth in the lithosphere.
ISSN: 0012-821X

hal-00412196
https://hal.archives-ouvertes.fr/hal-00412196
DOI : 10.1016/j.epsl.2007.11.018

Résumé : A l’aube du XXIème siècle, l’enjeu pour la Martinique est de construire un modèle de développement endogène qui nécessite son intégration dans la Caraïbe. Un consensus existe pour cette orientation, tant au niveau des acteurs économiques que des gouvernances locales et nationales. Mais qu’en pense la population ? Sur le plan diplomatique, cette orientation se concrétise par une adhésion progressive de la Martinique aux différentes organisations communautaires caribéennes en qualité de membre à part entière. Toutes ces avancées s’opèrent dans un contexte socio-économique qui se caractérise pour la Martinique par une population en voie de vieillissement, un chômage structurel et un départ du territoire des jeunes diplômés. Dans cette perspective, le développement des échanges avec la Caraïbe va induire des flux matériels et immatériels, et pour les Martiniquais, des perspectives d’insertion professionnelle dans des pays de la Caraïbe qui ont des taux de chômage plus cléments. Ces éléments de contexte interrogent l’évolution de la société Martiniquaise dans un nouveau paysage international, qui va au-delà des accords politiques et diplomatiques, car il va induire des rencontres entre individus de culture et de pratiques professionnelles différentes, directement ou indirectement, matérialisées ou dématérialisées. Cette étude s’intéresse au point de vue des individus, au regard qu’ils portent sur ce qu’il convient de considérer comme un projet de société et aux moyens qu’ils ont d’y contribuer. Elle s’inscrit dans la perspective du développement de la mobilité professionnelle des Martiniquais dans la Caraïbe et elle fait des propositions sur les conditions de sa mise en œuvre. Elle interroge l’environnement dans lequel s’opèrent aujourd’hui les projets de mobilité professionnelle à l’international des Martiniquais et les représentations sociales qui sont en marche dans ce nouveau paradigme. Comment le Martiniquais peut-il devenir un citoyen caribéen sur un marché du travail élargi aux pays du bassin caribéen ?
At the turn of the century, the challenge for Martinique is to build a model of endogenous development that requires its integration in the Caribbean. There is consensus for this approach, both in terms of economic actors as local and national governance. But what the people think? On the diplomatic front, this orientation is reflected by a gradual accession of Martinique to different Caribbean community organizations as a full member. All these developments are taking place in a socioeconomic context characterized for Martinique by a population in the process of aging, structural unemployment, and a departure from the territory of graduates. In this perspective, the development of trade with the Caribbean will induce the material and immaterial flows and for Martinique, perspectives employability in Caribbean countries with more lenient unemployment. These contextual elements questioning the evolution of Martinican society in a new international landscape that goes beyond political and diplomatic agreements, as it will lead to encounters between individuals of different cultures and business practices, directly or indirectly, materialized or dematerialized. This study focuses on the perspective of individuals and the way they look at what should be regarded as a social project and how they contribute. It is part of a perspective of the development of professional mobility of Martinique in the Caribbean and on the conditions for its implementation. She questions the environment in which today operate occupational mobility projects internationally Martinicans and social representations that are running in this new paradigm. How can the Caribbean Martinique become a citizen on the broader labor market to the countries of the Caribbean basin?

http://www.theses.fr/2015AGUY0845/document