Éditeur(s) : HAL CCSD American Society of Mechanical Engineers
Résumé : International audience
The isothermal flow in a model channel of plate-fin heat exchanger with periodically arranged embossed-like vortex generators is investigated. Velocity measurements are performed by LDA in the transitional regime (Reynolds number from 1000 up to 5000). Strong longitudinal vortices are observed downstream of each generator. The vortex roll-up process is highlighted by the evolution of the velocity vector field in the cross section of the flow. The modifications of the vortex characteristics after successively encountered generators are investigated. This work shows most of the flow features which are known to produce heat transfer enhancement, and shows that these smooth shaped vortex generators are very promising for enhanced heat exchangers.
ISSN: 0098-2202

hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938/document
https://hal.archives-ouvertes.fr/hal-01582938/file/Dupont_heat_exchanger_JFE2002_preprint.pdf
DOI : 10.1115/1.1595675

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
In situ mineralization of CO2 in ultramafic rock-hosted aquifers is one of the promising solutions for decreasing CO2 concentrations in the atmosphere. Naturally altered ultramafic rocks suggest that carbonation processes are controlled by local heterogeneities in the structure of the rock and fluid transport at the water-rock interfaces. We studied the role of rock crystallographic anisotropy relative to the global fluid flow direction on the mineralization of CO2 by means of electron microscope analyses from the macro- to the micrometer scale (EBSD-FIB). The sample used for the measurements was a hot pressed olivine core percolated by water enriched in CO2 (pCO2 = 10 MPa) at 180 °C. During the percolation experiment, olivine was dissolved and two types of carbonates, dolomite, and magnesite, were precipitated on olivine surfaces. The results showed that the dissolution of olivine is controlled by its crystallographic properties as shown by the development of etch-pits only on the (010)ol planes and with elongated shapes parallel to the [010]ol axes. In contrast, the precipitation of carbonates is governed by hydrodynamic properties. Carbonates are heterogeneously distributed in the percolated rock. They are mainly located along the moderate (for dolomite) and the minor (for magnesite) flow paths, both oriented parallel to the principal fluid flow direction, which allow carbonates to be supplied with divalent cations (e.g., Ca2+, Mg2+, and Fe2+). In these flow paths, carbonate growth is systematically oriented normal to the flow that facilitates the development of chemical gradients with cationic supersaturation conditions for carbonate precipitation near the walls.In natural systems, the (010)ol planes are parallel to the Moho and the (100)ol planes are vertical; our study suggests that flow of CO2-rich fluids will induce precipitation of carbonates localized along, and preferentially clogging, vertical flow paths while favoring olivine dissolution along horizontal fluid pathways. This dual control of structure and fluid flow on carbonation mechanisms could be an important parameter allowing sustainable CO2 storage in peridotites, while limiting the risks of leakage toward the surface.
ISSN: 0003-004X

hal-01143393
https://hal.archives-ouvertes.fr/hal-01143393
DOI : 10.2138/am-2015-4913

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Before attaining the mantle wedge, where they trigger partial melting, volatiles released from dehydration reactions in the slab have to migrate across a relatively cold (<750 degrees C), peridotite-layer above the incoming slab. In order to unravel the mechanisms allowing for this initial stage of fluid transport, we performed a detailed field and microstructural study of metamorphic prograde peridotites in the Cerro del Almirez ultramafic massif (Betic Cordillera, Spain), where evidences of one of the most important dehydration reactions in subduction zones, the high-pressure antigorite breakdown (P = 1.6-1.9 GPa and T approximate to 680 degrees C), can be mapped in the field. This reaction led to arborescent growth of centimeter-size olivine and orthopyroxene, producing a chlorite-harzburgite with a spinifex-like texture. Microstructural observations and crystal preferred (CPO) mapping show no evidences of solid-state deformation during the prograde growth of olivine and orthopyroxene at the expenses of antigorite. However, a few tens to a hundred meters away from the reaction front, the metamorphic texture is partially obliterated by grain-size reduction in roughly planar conjugate zones, a few mm to meters wide. Grain size reduction zones (GSRZ) are characterized by (1) sharp contacts with undeformed spinifex-like texture domains, (2) important reduction of the olivine grain size (60-250 mu m), (3) olivine color change from brownish to colorless, (4) decrease in the modal amount of orthopyroxene, and (5) at the mm- to cm-scale, irregular shapes and abrupt terminations. Field and microstructural observations exclude that relative displacement took place across these GSRZ. Changes in modal composition imply reactions with fluids undersaturated in silica. Analysis of olivine crystal-preferred orientations (CPO) in GSRZ shows patterns similar, but more dispersed, than those in neighboring spinifex-like domains. It also reveals mm- to cm-scale discrete domains with rather homogeneous crystallographic orientations suggesting inheritance from the preexisting spinifex-like olivines in the host peridotite. Misorientation angles between neighboring grains in the GSRZ show peaks at similar to 5-10 degrees and similar to 20 degrees, but rotations are not crystallographically controlled. Based on these observations, we rule out the formation of the GSRZ by dynamic recrystallization during dislocation creep and propose that they record brittle deformation (microcraking) of the spinifex-like chlorite-harzburgite, probably induced by hydrofracturing at high pressure and relative low temperature conditions (680-710 degrees C). High-pressure hydrofracturing can, thus, be invoked as an efficient mechanism for fluid flow across the cold top-slab mantle layer, hence allowing the slab-derived fluids to ingress in the wedge.
ISSN: 0012-821X

hal-00534035
https://hal.archives-ouvertes.fr/hal-00534035
DOI : 10.1016/j.epsl.2010.06.029

Éditeur(s) : HAL CCSD
Résumé : Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3 km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6 m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution-recrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.
Swiss Journal of Geosciences

hal-00795553
https://hal.archives-ouvertes.fr/hal-00795553
DOI : 10.1007/s00015-012-0098-0

Éditeur(s) : Geological Soc Amer, Inc
Résumé : Pockmarks are seafloor depressions commonly associated with fluid escape from the seabed and are believed to contribute noticeably to the transfer of methane into the ocean and ultimately into the atmosphere. They occur in many different areas and geological contexts, and vary greatly in size and shape. Nevertheless, the mechanisms of pockmark growth are still largely unclear. Still, seabed methane emissions contribute to the global carbon budget, and understanding such processes is critical to constrain future quantifications of seabed methane release at local and global scales. The giant Regab pockmark (9 degrees 42.6' E, 5 degrees 47.8' S), located at 3160 m water depth near the Congo deep-sea channel (offshore southwestern Africa), was investigated with state-of-the-art mapping devices mounted on IFREMER's (French Research Institute for Exploitation of the Sea) remotely operated vehicle (ROV) Victor 6000. ROV-borne micro-bathymetry and backscatter data of the entire structure, a high-resolution photo-mosaic covering 105,000 m(2) of the most active area, sidescan mapping of gas emissions, and maps of faunal distribution as well as of carbonate crust occurrence are combined to provide an unprecedented detailed view of a giant pockmark. All data sets suggest that the pockmark is composed of two very distinctive zones in terms of seepage intensity. We postulate that these zones are the surface expression of two fluid flow regimes in the subsurface: focused flow through a fractured medium and diffuse flow through a porous medium. We conclude that the growth of giant pockmarks is controlled by self-sealing processes and lateral spreading of rising fluids. In particular, partial redirection of fluids through fractures in the sediments can drive the pockmark growth in preferential directions.
Geology (0091-7613) (Geological Soc Amer, Inc), 2014-01 , Vol. 42 , N. 1 , P. 63-66

Droits : 2013 Geological Society of America
http://archimer.ifremer.fr/doc/00186/29731/28293.pdf
DOI:10.1130/G34801.1
http://archimer.ifremer.fr/doc/00186/29731/

Résumé : Le fluide chaud produit par les forages de la centrale géothermique de Bouillante (Guadeloupe) est enrichi en espèces dissoutes telles que la silice qui peuvent précipiter sous forme de dépôts solides lors de son refroidissement et gêner fortement la production électrique. L’un des principaux objectifs de ce travail de thèse a donc été d’améliorer l’état des connaissances sur les conditions physiques, chimiques et cinétiques de la précipitation de la silice amorphe à Bouillante. Après une étude des caractéristiques physico-chimiques des fluides et des dépôts associés au champ de Bouillante, des expériences sur la cinétique de précipitation de la silice, sur site, pour une large gamme de température (25 - 90°C) et de pH (4 - 12) ont été menées et analysées en détail.Pour l’ensemble de ces expériences, seule la polymérisation (réversible) de la silice dissoute, sous forme de suspensions colloïdales très stables en solution, a été observée. La modélisation des données expérimentales de cinétique montre que la vitesse de polymérisation de la silice suit une loi d’ordre 2 vis-à-vis de la silice dissoute jusqu’à l’équilibre en accord avec une dimérisation de la silice. Par contre, durant l’étape initiale de la réaction, une loi d’ordre 4 semble mieux adaptée, suggérant des réactions de polymérisation plus complexes avec formation de tétramères. La température a un effet limité sur la cinétique de polymérisation de la silice comparé à l’effet du pH qui est beaucoup plus important. L’énergie d’activation de la réaction globale est de 41 - 54 kJ pour des pH compris entre 5 et 8.La caractérisation de la silice précipitée a mis en évidence des différences notables entre la structure poreuse de la silice solide prélevée sur les installations de surface et celle de la silice colloïdale obtenue par polymérisation lors des expériences de cinétique, ce qui semble indiquer que des mécanismes différents interviennent dans ces deux contextes de précipitation de la silice dissoute.Le deuxième objectif de cette thèse était d’évaluer la possibilité de valoriser la silice extraite de l’eau géothermale de Bouillante dans un procédé de traitement des eaux naturelles par adsorption. Pour cela, les propriétés d’adsorption de la silice géothermale brute et fonctionnalisée par le poly(ethylèneimine) (ou PEI) ont été étudiées pour deux polluants : un colorant, le bleu de méthylène et un métal lourd, le plomb. Les résultats obtenus montrent que la silice brute possède une grande capacité d’adsorption vis-à-vis du bleu de méthylène. En outre, la fonctionnalisation de la silice par le PEI permet d’améliorer sa capacité d’adsorption vis-à-vis du plomb en solution, en accord avec un modèle cinétique du pseudo-second ordre suggérant une chimisorption. Le modèle d’isotherme de Redlich-Peterson est également en très bon accord avec les données expérimentales.
The hot geothermal fluid produced by the geothermal power plant of Bouillante (Guadeloupe) contains various dissolved components such as silica that can precipitate as solid deposits during their cooling and cause serious problems on the electricity generation. One of the aim of this study is to improve the understanding on the physical, chemical and kinetics conditions of the amorphous silica precipitation in the Bouillante geothermal field. After a study on the physical and chemical characteristics of the Bouillante fluids and deposits which can form during their exploitation, experiments on the kinetics of silica precipitation, on site, under a large range of temperature (25 – 90°C) and pH (4 – 12) have been carried out and analyzed in detail.During on site kinetics experimentations only dissolved silica polymerization (reversible) as colloidal gel, very stable in solution, was observed. Modeling of the experimental data showed that the kinetics polymerization is characterized by a 2-order kinetic law relative to dissolved silica until the equilibrium that is consistent with silica dimerization. On the other side, the initial stage of the reaction is better characterized by a 4-order kinetic law that suggested more complex polymerization reactions with tetramers formation.Temperature has a little effect on the polymerization kinetics compared with the pH which has an effect more important. The activation energy of silica precipitation calculated between 25 and 90°C, is about 41 - 54 kJ for pH ranging to 5 - 8.The characterization of the silica precipitate reveals significant differences in the porous structure of the silica collected on the surface installations and the one obtained from kinetic experiments that suggests different precipitation mechanisms. The second objective of this thesis was to evaluate the possibility to promote geothermal silica for the treatment of natural waters containing contaminants by adsorption. Adsorption properties of the untreated and functionalized by poly(ethylèneimine) (ou PEI) geothermal silica have been investigated for two pollutants: a colorant, the methylene blue and a heavy metal, the lead.Results showed that untreated silica has a great adsorption capacity concerning the methylene blue. Besides, silica functionalization by the PEI allows improving the adsorption capacity for lead in solution. The adsorption kinetics curves followed a pseudo-second order model consistent with a chimisorption. The isotherm model of Redlich-Peterson fitted well the experimental data.

http://www.theses.fr/2014AGUY0698/document

Éditeur(s) : HAL CCSD
Résumé : International audience
Objective Oxidative stress, excess production of reactive oxygen species (ROS) and intense colonization of the respiratory tract by microorganisms are described in CF patients, leading to an influx in macrophages. This results in activation of NADPH oxidase that yields ROS, initiating the oxidative burst responsible for pathogen destruction. We showed that phagocytosis was altered in CF macrophages, yet oxidative status in this cell was not defined. The objective of this study is to draw a link between oxidative stress and plasma membrane integrity in CF macrophages, since lipid peroxidation is known to alter cell membrane. Methods Peripheral blood monocytes-derived macrophages were obtained from CF patients and healthy subjects. Plasma membrane fluidity was assessed with di4-ANEPPDHQ and oxidative status was measured with ROS indicating probes. Results In CF macrophages, membrane fluidity was increased whereas lipid peroxidation was diminished. Surprisingly, general oxidative status remained similar to the one observed in non-CF macrophages. Also, CF macrophages did not abolish chemically induced-oxidative stress. In non-CF macrophages, treatment with cholesterol slightly increased membrane fluidity whereas LPS treatment had no effect. Conclusion CF macrophages displayed an increased membrane fluidity associated with a decreased lipid peroxidation. This raises the hypothesis that membrane alteration in CF macrophages may be due to other mechanism than oxidative stress. Nevertheless, since the killing capacity of CF macrophage is defective, a deregulation of O•−2 production is very likely, suggesting alteration of NADPH oxidase or mitochondrial dysfunction
the 38th European Cystic Fibrosis Conference
Vienne, Austria

hal-01162769
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01162769
DOI : 10.1016/S1569-1993(15)30217-4

Éditeur(s) : HAL CCSD
Une méthode dynamique de projection pénalisation pour les fluides
Orléans, France

hal-00771447
https://hal.univ-antilles.fr/hal-00771447

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Bronchoalveolar lavage (BAL) is a major diagnostic tool in lung diseases, including viral respiratory infections. We aimed to better define the situations where viral tests should be performed on BAL fluid (BALF). We retrospectively studied all cases where viral tests [immunofluorescence, immunocytochemistry, viral culture, and/or polymerase chain reaction (PCR)] were performed on BALF during a period of 1 year (2008) in our institution. We compared the characteristics of patients with virus-positive versus virus-negative BALF. Of the 636 BALF samples sent to the microbiology laboratory, 232 underwent viral tests. Of these, 70 (30 %) were positive and identified 85 viruses: herpes simplex virus (HSV)-1 (n = 27), cytomegalovirus (CMV, n = 23), Epstein-Barr virus (EBV, n = 18), human herpesvirus (HHV)-6 (n = 12), respiratory syncytial virus (RSV, n = 3), rhinovirus (n = 1), and adenovirus (n = 1). The variables associated with positive viral tests on univariate analysis were immunosuppression [human immunodeficiency virus (HIV), corticosteroids >10 mg/day for ≥3 weeks, or other immunosuppressive therapy], ground-glass attenuations on computed tomography (CT) scanning, late-onset ventilator-associated pneumonia (VAP), and durations of (i) hospital stay, (ii) intensive care unit (ICU) stay, and (iii) mechanical ventilation before BAL (p < 0.01 for each comparison). On multivariate analysis, only immunosuppression [odds ratio (OR) 6.4, 95 % confidence interval (CI) [2.8-14.3], p < 0.0001] and ground-glass attenuations (OR 3.7, 95 % CI [1.8-7.7], p = 0.0004) remained associated with virus-positive BAL. None of the viral tests performed on BALF for the initial assessment of diffuse infiltrative lung disease (n = 15) was positive. PCR improved the diagnostic yield of viral tests on BALF by 50 %. Testing for viruses on BALF should be mostly restricted to immunocompromised patients with acute respiratory diseases and/or patients with unexplained ground-glass attenuations on CT scanning.
ISSN: 0934-9723

hal-00873158
https://hal.archives-ouvertes.fr/hal-00873158
DOI : 10.1007/s10096-012-1791-7
PUBMED : 23238685

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Rainbow is a dome-shaped massif at the 36°14′N nontransform offset along the Mid-Atlantic Ridge. It hosts three ultramafic-hosted hydrothermal sites: Rainbow is active and high temperature; Clamstone and Ghost City are fossil and low temperature. The MoMARDREAM cruises (2007, 2008) presented here provided extensive rock sampling throughout the massif that constrains the geological setting of hydrothermal activity. The lithology is heterogeneous with abundant serpentinites surrounding gabbros, troctolites, chromitites, plagiogranites, and basalts. We propose that a W dipping detachment fault, now inactive, uplifted the massif and exhumed these deep-seated rocks. Present-day deformation is accommodated by SSW-NNE faults and fissures, consistent with oblique teleseismic focal mechanisms and stress rotation across the discontinuity. Faults localize fluid flow and control the location of fossil and active hydrothermal fields that appear to be ephemeral and lacking in spatiotemporal progression. Markers of high-temperature hydrothermal activity (∼350°C) are restricted to some samples from the active field while a more diffuse, lower temperature hydrothermal activity (<220°C) is inferred at various locations through anomalously high As, Sb, and Pb contents, attributed to element incorporation in serpentines or microscale-sulfide precipitation. Petrographic and geochemical analyses show that the dominant basement alteration is pervasive peridotite serpentinization at ∼160–260°C, attributed to fluids chemically similar to those venting at Rainbow, and controlled by concomitant alteration of mafic-ultramafic units at depth. Rainbow provides a model for fluid circulation, possibly applicable to hydrothermalism at oceanic detachments elsewhere, where both low-temperature serpentinization and magmatic-driven high-temperature outflow develop contemporaneously, channeled by faults in the footwall and not along the detachment fault.
ISSN: 1525-2027

hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281/document
https://hal.archives-ouvertes.fr/hal-01115281/file/Andreani_et_al-2014-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2014GC005269

Éditeur(s) : HAL CCSD Coastal Education and Research Foundation
Résumé : International audience
ISSN: 0749-0208

hal-00905651
https://hal.archives-ouvertes.fr/hal-00905651

Résumé : Cette thèse à pour objet l'étude théorique et numérique de solutions dans les équations aux dérivées partielles non linéaires de la physique, en particulier en dynamique des fluides. La présence de discontinuités dans les solutions de ces équations complique la compréhension mathématique des phénomènes mis enjeu et leur traitement numérique, notamment en vue de simulations informatiques . Nous étudions ces équations par une méthode de régularisation dans un espace fonctionnel approprié. Lorsque des schémas numériques construits par des méthodes différentes conduisent à des résultats identiques, ceci jusque dans leurs moindres détails, il semble alors naturel de s'interroger dans quelle mesure ces suites de solutions numériques constituent une approximation d'une solution des équations étudiées. Nous construisons des suites de solutions approchées à partir d'un schéma numérique original,stable et suffisamment simple pour démontrer que ses suites constituent une méthode asymptotique de Maslov au sens des distributions en dimension trois d'espèce. La technique de régularisation employée consiste à étendre les variables réelles du problème ne des variables complexes, ce qui nous permet de construire des familles de solutions particulières que l'on ramène au cas réel en faisant tendre un petit paramètre vers O. Les solutions physiques recherchées apparaissent alors comme valeurs au bord de fonction holomorphes. Nous illustrons les résultats obtenus par des applications en cosmologie dans les cadres Newtoniens et relativistes pour des systèmes sans pression, puis avec pression et auto-gravitation, ainsi que pour le système des gaz parfaits.
This thesis is devoted to the theoretical and numerical study of singular solutions appearing in nonlinear partial differential complicates the mathematical understanding of the phenomena under concem as well as their numerical treatment, in particular in view of computation. These equations are studied by a regularization method in an appropriate functional space. When completely different numerical methods give the same results up to the smallest details one can reasonably expect that these numerical results suggest the existence of a mathematical solution of theses equations. We construct sequences of approximate solutions from an original numerical scheme, which is stable and simple enough to prove that these sequences constitute a Maslov asymptotic method in three space dimension. The regularization technique in use consits in extending the real variables of the problem into complex ones, which perrnits to construct families of particular equations that we bring back to the real case by letting a small paramater tend to zero. The expected physical solutions appear as boundary values of holomorphie functions . Illustrations are given by applications to cosmology in the Newtorian and re1ativistic settings for pressure1ess fluid dynamics, then in presence of self-gravitation and pressure as weil as for the systemof ideal gases

http://www.theses.fr/2011AGUY0478/document

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Les plages sableuses constituent une frontière mobile et poreuse entre l'océan ouvert et la terre. La compréhension de la circulation dans les nappes de plage est importante pour une variété de processus physiques, biologiques et chimiques. On cherche à caractériser in-situ la dynamique souterraine sous la zone de swash. Le site atelier est la plage microtidale de Rousty (Camargue, France). L'étude, réalisée sur 48h les 13 et 14 décembre 2014, fait partie d'une plus grande campagne de mesure visant à caractériser la réponse hydro-morphologique de la plage de Rousty à une saison hivernale. La période présentée ici correspond à la phase de déclin d'une tempête modérée. La stratégie retenue dans le cadre de ce projet a été de déployer un réseau de15 capteurs de pression enterrés sous la zone de swash. Les caractéristiques des vagues incidentes, à la fois au large et dans la zone de surf interne, ont été mesurées conjointement à l'utilisation d'un LiDAR terrestre haute fréquence permettant de suivre la surface libre et l'évolution du lit sableux à haute fréquence sur la zone de swash. L'analyse des données moyennées dans le temps a mis en évidence la présence d'un schéma de circulation relativement robuste sous la zone de swash, qui se décale vers le large en suivant la descente du niveau moyen et la diminution de l'activité des vagues. La tendancedominante est un écoulement vers le large, avec une intensité maximale de l'ordre de 0.1mm/s modulé par des infiltrations et exfiltrations dans les parties hautes et basses de la zone de swash, respectivement. L'analyse haute fréquence à des événements de swash sélectionnés ont mis en évidence uncycle souterrain caractéristique.
XIV èmes Journées Nationales Génie Côtier – Génie Civil
toulon, France

hal-01357778
https://hal.archives-ouvertes.fr/hal-01357778

Éditeur(s) : HAL CCSD
Une methode dynamique de projection-pénalisation pour les fluides
Pointe-à-Pitre, Guadeloupe

hal-00771439
https://hal.univ-antilles.fr/hal-00771439

Éditeur(s) : HAL CCSD Elsevier
Résumé : The uppermost mantle in back arc regions is the site of complex interactions between partial melting, melt percolation, and fluid migration. To constrain these interactions and evaluate their consequences on geochemical cycles, we carried out an in situ trace element and water study of a suite of spinel peridotite xenoliths from two regions of the Japan back arc system, Ichinomegata (NE Japan) and Oki-Dogo (SW Japan), using LA-ICPMS and FTIR spectrometry, respectively. This study provides the first full dataset of trace element and hydrogen compositions in peridotites including analyses of all their main constitutive silicate minerals: olivine, orthopyroxene and clinopyroxene. The Ichinomegata peridotites sample a LREE-depleted refractory mantle (Mg# olivine = 0.90; Cr# spinel = 0.07–0.23; Yb clinopyroxene = 7.8–13.3 × C1-chondrite, and La/Yb clinopyroxene = 0.003–0.086 × C1-chondrite), characterized by Th-U positive anomalies and constant values of Nb/Ta. The composition of the studied Ichinomegata samples is consistent with that of an oceanic mantle lithosphere affected by cryptic metasomatic interactions with hydrous/aqueous fluids (crypto-hydrous metasomatism). In contrast, the Oki-Dogo peridotites have low Mg# olivine (0.86–0.93) and a broad range of compositions with clinopyroxene showing “spoon-shaped” to flat, and LREE-enriched patterns. They are also characterized by their homogeneous compositions in the most incompatible LILE (e.g., Rb clinopyroxene = 0.01–0.05 × primitive mantle) and HFSE (e.g., Nb clinopyroxene = 0.01–2.16 × primitive mantle). This characteristic is interpreted as resulting from various degrees of melting and extensive melt-rock interactions. FTIR spectroscopy shows that olivine in both Ichinomegata and Oki-Dogo samples has low water contents ranging from 2 to 7 ppm wt. H2O. In contrast, the water contents of pyroxenes from Ichinomegata peridotites (113–271 ppm wt. H2O for orthopyroxene, and 292–347 ppm wt. H2O for clinopyroxene) are significantly higher than in Oki-Dogo peridotites (9–35 ppm wt. H2O for orthopyroxene, and 15–98 ppm wt. H2O for clinopyroxene). This indicates a relationship between melt-rock interaction and water concentrations in pyroxenes. Our study suggests that the water content of the Japan mantle wedge is controlled by the late melt/fluid/rock interactions evidenced by trace element geochemistry: a mechanism triggered by magma-rock interactions may have acted as an efficient dehydrating process in the Oki-Dogo region while the Ichinomegata mantle water content is controlled by slab-derived crypto-hydrous metasomatism.
ISSN: 0016-7037

hal-01553105
https://hal.archives-ouvertes.fr/hal-01553105
DOI : 10.1016/j.gca.2017.03.042

Éditeur(s) : HAL CCSD
Résumé : International audience
Proceedings - 2014 International Conference on Electromag- netics in Advanced Applications, ICEAA 2014
Palm Beach, Aruba, Aruba

hal-01116596
https://hal.inria.fr/hal-01116596

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Secondary migration is defined as the movement of hydrocarbons through relatively permeable rocks from source to trap: a two-phase flow within a porous medium. Depending on the geometry and capillary pressure distributions of carrier beds, secondary migration has both vertical and lateral components. The present paper focuses on that part of the migration where the movement is mainly vertical. Its objective is to propose a description of the dynamics governing the vertical part of secondary migration based on the main physical aspects of two-phase flow in a homogeneous porous medium. The study is illustrated by laboratory observations performed in a vertical, 2-D Hele-Shaw cell filled with a transparent porous medium where the flow of dyed oil invading a wetting fluid is visually observed. These observations help us to understand the effect of buoyant, capillary and viscous forces on the resulting flow, the relative importance of which is characterized by non-dimensional numbers. Extrapolating these observations to natural media, it is proposed that vertical secondary migration can be described as a percolation of disconnected and vertically-elongated stringers. These stringers do not move continuously but as a succession of snap-off and re-feeding events which result in a jerky upward movement. Using parameters characterizing the physical properties of the fluid and of the porous medium, the geometry and the dynamic behavior of the stringers are estimated. The width of stringers occurring during secondary migration in geological media is centimetric and their vertical size ranges from several centimeters to a few meters. An upper limit of the mean upward velocity of stringers is proposed, as well as an estimate of their spatial density and of the minimum, average horizontal distance (decametric) between two stringers. The stringers are sparsely distributed, resulting in a low average oil loss and a high efficiency of the vertical migration process.
ISSN: 0264-8172

hal-00831370
https://hal.archives-ouvertes.fr/hal-00831370
https://hal.archives-ouvertes.fr/hal-00831370/document
https://hal.archives-ouvertes.fr/hal-00831370/file/pekins-V-edited.pdf
DOI : 10.1016/j.marpetgeo.2013.04.020

Éditeur(s) : HAL CCSD
Résumé : International audience
Island barriers are common features along the world coastlines. They have a crucial role in protecting inland and rich lagoonal ecosystems. Erosion and sand transfers on these island barriers during extreme events such as tropical storms or typhoons remain poorly investigated. This work focuses on a multi-scales nalysis (season to decade) of the morphodynamics of Wan-Tzu-Liao sand barrier subjected to extreme waves and sea surges. We combine topographic measurements of the emerged beach at seasonal scale between 2011 to 2012 and long-term (1993-2009) shoreline changes using aerial photographs and satellite images. At the seasonal scale, during Monsoon, the sand was taken from the beach-front and transported seaward outside the study area. During typhoons season, 12 typhoons drove a beach recovery process resulting in a seaward shoreline shift. This annual behavior is discussed in term of roll-over process of the barrier. At the decadal scale, the shoreline changes evidence cross-shore processes in the north part of the barrier and longshore processes in the south. Although the chronic landward migration displays several stages, the strong losses of the barrier area occurs only since 2004 and call into question the general concept of conservation of mass during the roll-over of a barrier.
Revue Paralia, XIIIème Journées Nationales Génie CIvil Génie Côtier
Dunkerque, France

hal-01018203
https://hal.archives-ouvertes.fr/hal-01018203