Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Up to now, several studies have investigated estrogen receptor (ER)–estrogen response element (ERE) interaction using biosensors such as surface plasmon resonance. These strategies have aimed to understand the molecular mechanism of such interaction as well as the effect of the ligand on this interaction. These approaches start to be used to determine the mechanisms of protein/DNA interaction, in particular in the context of drug discovery or environmental applications. However, some physical and biochemical parameters (incubation time, temperature, protease inhibitor cocktail, and bovine serum albumin (BSA)) are not completely described in the literature and could deeply modify the obtained results. This paper aims to focus not only on the preliminary steps of sample preparation such as protein thawing and incubation conditions (time and temperature) but also on the evaluation of protease inhibitor cocktail and BSA effect on the measurement of ER–ERE interactions.
ISSN: 1618-2642

hal-01418341
https://hal.archives-ouvertes.fr/hal-01418341
https://hal.archives-ouvertes.fr/hal-01418341/document
https://hal.archives-ouvertes.fr/hal-01418341/file/Estrogen%20Receptor%20preparation%20effects_accepted.pdf
DOI : 10.1007/s00216-016-9967-0

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
After the January 12, 2010, Haiti earthquake, we deployed a mainly offshore temporary network of seismologic stations around the damaged area. The distribution of the recorded aftershocks, together with morphotectonic observations and mainshock analysis, allow us to constrain a complex fault pattern in the area. Almost all of the aftershocks have a N‐S compressive mechanism, and not the expected left‐lateral strike‐slip mechanism. A first‐order slip model of the mainshock shows a N264°E north‐dipping plane, with a major left‐lateral component and a strong reverse component. As the aftershock distribution is sub‐parallel and close to the Enriquillo fault, we assume that although the cause of the catastrophe was not a rupture along the Enriquillo fault, this fault had an important role as a mechanical boundary. The azimuth of the focal planes of the aftershocks are parallel to the north‐dipping faults of the Transhaitian Belt, which suggests a triggering of failure on these discontinuities. In the western part, the aftershock distribution reflects the triggering of slip on similar faults, and/or, alternatively, of the south‐dipping faults, such the Trois‐Baies submarine fault. These observations are in agreement with a model of an oblique collision of an indenter of the oceanic crust of the Southern Peninsula and the sedimentary wedge of the Transhaitian Belt: the rupture occurred on a wrench fault at the rheologic boundary on top of the under‐thrusting rigid oceanic block, whereas the aftershocks were the result of the relaxation on the hanging wall along pre‐existing discontinuities in the frontal part of the Transhaitian Belt.
ISSN: 0094-8276

insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489/document
https://hal-insu.archives-ouvertes.fr/insu-00643489/file/GRL-haiti.2011.pdf
DOI : 10.1029/2011GL049799

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We analyze focal mechanisms of shallow-intermediate earthquakes in a NW-SE transect along the western Betic Cordillera and Alboran Sea, and deep earthquakes located in the central Betics to constrain the state of stress at the Gibraltar Arc slow convergence area. Shallow earthquakes (< 40 km) are preferably clustered at the mountain front. A general NW-SE horizontal compression is compatible with the convergence, and NW plunging compression axes are in agreement with frontal thrust activity. Toward the Alboran Sea the earthquakes are progressively deeper, reaching intermediate depths (40-120 km) near the coast and supporting the present-day activity of subduction only in this area. The Iberian continental crust concentrates most of the intermediate seismicity and is forced to partially sink into the mantle, probably through the pull of the oceanic slab. This downdip pull together with the buoyancy of the Iberian continental crust produces the slab curvature, downdip extension in the external arc of the continental slab, and downdip compression in the inner arc. T axes highly dipping to the southeast at 90-120 km depth occur at the oceanic/continental transition. Deep earthquakes (> 620 km) show very similar focal mechanisms, fitting the general slab behavior of resistance to further descent at the 660 km discontinuity. Seismicity features evidence the present-day stress distribution in a context of transition from subduction to continental collision.
ISSN: 1525-2027

hal-00669889
https://hal.archives-ouvertes.fr/hal-00669889
DOI : 10.1029/2011GC003824

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Earth deformation is a multi-scale process ranging from seconds (seismic deformation) to millions of years (tectonic deformation). Bridging short- and long-term deformation and developing seismotectonic models has been a challenge in experimental tectonics for more than a century. Since the formulation of Reid's elastic rebound theory 100 years ago, laboratory mechanical models combining frictional and elastic elements have been used to study the dynamics of earthquakes. In the last decade, with the advent of high-resolution monitoring techniques and new rock analogue materials, laboratory earthquake experiments have evolved from simple spring-slider models to scaled analogue models. This evolution was accomplished by advances in seismology and geodesy along with relatively frequent occurrences of large earthquakes in the past decade. This coincidence has significantly increased the quality and quantity of relevant observations in nature and triggered a new understanding of earthquake dynamics. We review here the developments in analogue earthquake modelling with a focus on those seismotectonic scale models that are directly comparable to observational data on short to long timescales. We lay out the basics of analogue modelling, namely scaling, materials and monitoring, as applied in seismotectonic modelling. An overview of applications highlights the contributions of analogue earthquake models in bridging timescales of observations including earthquake statistics, rupture dynamics, ground motion, and seismic-cycle deformation up to seismotectonic evolution.
ISSN: 1869-9510

hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120/document
https://hal.archives-ouvertes.fr/hal-01553120/file/rosenau2017.pdf
DOI : 10.5194/se-8-597-2017

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper, we focus on the very specificity of rumors as pieces of information for modeling their process of propagation. We consider a population of pedestrians walking in a city and we assume that a rumor is transmitted by word of mouth from one to another. Although the diffusion of a rumor is of course a multi-dimensional process driven by sociological, economical and psychological elements, in this first step, we emphasize one main dimension of this complex phenomenon only. This dimension is the neighborhood of individuals likely to spread the information. With a confrontation of two antagonistic properties of the neighborhood that are profusion and scarcity of spreaders, we highlight specific characteristics of rumors. This study could lead to the psychological mechanism involved in the decision for a person to become or not a spreader himself/herself. In summary, we study if scarcity could be the silver bullet explaining how a rumor spreads.
ASONAM 2015 : IEEE/ACM International Conference on Advances in Social Networks Analysis and Mining
Paris, France

hal-01252936
https://hal.archives-ouvertes.fr/hal-01252936
DOI : 10.1145/2808797.2809299

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics.We herein focus on "subduction infancy", which corresponds to the first 0-2 My immediately following subductionnucleation, when a newly born slab penetrates into the overriding plate mantle and heats up.The only remnants of this critical, yet elusive, geodynamic step are thin metamorphic soles, commonly found beneathpristine, 100-1000 km long portions of oceanic lithosphere emplaced on top of continents (i.e. ophiolites).In this study, we show how, during subduction infancy, transient mechanical properties of both the mantle and crustacross the subduction plate interface (during 100s ky) control and hinder the penetration of tectonic plates intothe mantle, and how this results in strong peaks of resistance and even slicing of their surface — leaving behindthin, chopped-off metamorphic slivers (i.e. metamorphic soles).These findings constrain the mechanical behaviour of the subduction plate interface (with implications for couplingprocesses and earthquake generation) as well as the properties of the crust and mantle. They also highlight the roleof fluids in enabling subduction to overcome this early resistance.
Geophysical Research Abstracts
Vienne, Austria

insu-01309386
https://hal-insu.archives-ouvertes.fr/insu-01309386

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : Elsevier
Résumé : Clinoforms on modern shelves and slopes, as well as in ancient rock records, are widely recognized as a fundamental building element of continental margin growth. Regardless of their dominant lithology, clinoforms are composed of three geometric elements: topset, foreset and bottomset. Traditionally, much emphasis in the study of clinoforms was put on the geometry of the topset, viewed as the most energetic portion of a clinoform and studied to discern if aggradation was active rather than erosional truncation, and on the foreset, the area with the highest sediment accumulation rates. Here we focus on the factors forcing clinoforms to taper out and on the inferred mechanisms for bottomset creation. We base our analysis on muddy shelf clinoforms, a particular class of clinoforms that is typical of low-gradient settings and is characterized by a substantial component of shore-parallel sediment transport. This paper is based on a large dataset of CHIRP-sonar profiles, bathymetric and isopach maps of the Late Holocene clinoform on the Adriatic shelf, where integrated stratigraphic studies from sediment cores allow a very high (in some cases century-scale) chronological resolution. Knowledge on the dominant oceanographic regime affecting sediment dispersal and, ultimately, clinoform development, has been recently refined during the EuroSTRATAFORM collaboration. Muddy clinoforms are markedly three-dimensional features that cannot be entirely understood solely on two-dimensional shore normal sections. We suggest that this class of clinoform is advection dominated and that an increase in the energy regime at the toe of the foreset may prevent sediment from reaching beyond the transition to the bottomset region.
Continental Shelf Research (0278-4343) (Elsevier), 2007-02 , Vol. 27 , N. 3-4 , P. 506-525

Droits : 2006 Elsevier Ltd All rights reserved
http://archimer.ifremer.fr/doc/2007/publication-2409.pdf
DOI:10.1016/j.csr.2006.11.013
http://archimer.ifremer.fr/doc/00000/2409/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Sphingolipids, in particular ceramide, have been described as important components of cellular signalling pathways. Ceramide can be produced via multiple mechanisms including through the hydrolysis of sphingomyelin by acid and neutral sphingomyelinase or by a de novo synthesis pathway. Recent studies have identified sphingomyelinases and ceramide synthases as important targets for γ-irradiation and chemotherapeutic drugs. Likewise, common cancer treatment modalities, such as γ-irradiation and many chemotherapeutic agents, induce cell death via the generation of ceramide. This suggests that the manipulation of ceramide production and metabolism could offer promising a means for the enhancement of anti-tumor therapies. The focus of this mini-review will be to discuss contemporary evidence suggesting that ceramide forming pathways and ceramide itself are important targets for the treatment of tumors and the development of novel tumor treatment strategies.
ISSN: 0304-3835

hal-00682458
https://hal.archives-ouvertes.fr/hal-00682458
DOI : 10.1016/j.canlet.2011.07.010
PUBMED : 21862212

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics. We herein focus on "subduction infancy", that is the first ~1-5 My immediately following subduction nucleation, when a newly born slab penetrates into the upper plate mantle and heats up. The only remnants of this critical yet elusive geodynamic step are thin metamorphic soles, commonly found beneath pristine, 100-1000 km long portions of oceanic lithosphere emplaced on continents (i.e., ophiolites).Through the (i) worldwide compilation of pressure-temperature conditions of metamorphic sole formation augmented by pseudosection thermodynamic modeling, (ii) calculations of the viscosity of materials along the plate interface and (iii) generic numerical thermal models, we provide a conceptual model of dynamic plate interface processes during subduction infancy (and initiation s.l.).We show in particular how major rheological switches across the subduction interface control slab penetration, and the formation of metamorphic soles. Due to the downward progression of hydration and weakening of the mantle wedge with cooling, the lower plate (basalt, sediment) and the upper plate (mantle wedge) rheologies equalize and switch over a restricted temperature-time-depth interval (e.g., at ~800°C and ~1 GPa, during 0.1-2 My, for high-temperature metamorphic sole formation). These switches result in episodes of maximum interplate mechanical coupling, thereby slicing the top of the slab and welding pieces (basalt, sediment) to the base of the mantle wedge. Similar mechanical processes likely apply for the later, deeper accretion and exhumation of high-temperature oceanic eclogites in serpentinite mélanges, or for the accretion of larger tectonic slices.This model provides constraints on the effective rheologies of the crust and mantle and general understanding, at both rock and plate scale, for accretion processes and early slab dynamics.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242103
https://hal-insu.archives-ouvertes.fr/insu-01242103

Éditeur(s) : HAL CCSD
Résumé : International audience
Numerous diffusion models can be found in the literature. Although these models havebeen widely used to address several problems related to diffusion phenomena at the individuallevel, they do not faithfully represent the microscopic mechanisms that take place in the realtransmission processes. Today, the apparition of new communication media allows model togo further by providing data on many real cases of diffusion. In particular, these newapproaches have shown that several dimensions involved in diffusion phenomena are notpresent in current models. In our works, we focus on two original dimensions to address thediffusion problem: the personality and the neutrality of the spreader. Our aim is to understandthe influence of these two dimensions regarding the diffusion behaviours. Our approach hasbeen used to study diffusion of messages related to several events occurred in January 2015.The results obtained provide a new and interesting lighting on the heterogeneity of thediffusion behaviors in function of personality and neutrality levels. This work provides amethodology which may be useful in marketing strategies, for instance the analysis of thefeatures of individuals who talk about their touristic trips in Caribbean. Such an approach mayalso be useful to understand diffusion and exchange behaviors in the Caribbean basin. Froman economic point of view, such an approach could be used for understanding theexpectations, targeting individuals and proposing tailored offers.
20th Biennial General Meeting of The Caribbean Academy of Sciences
Deshaies, France

hal-01514262
https://hal.archives-ouvertes.fr/hal-01514262

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fault pseudotachylytes form by frictional melting during seismic slip and therefore are widely interpreted as “earthquake fossils.” Rapid movement along a rupture surface typically forms a pseudotachylyte generation vein, the thickness of which increases with earthquake magnitude. The direction and sense of seismic slip cannot always be determined due to the generally complex geometry of pseudotachylyte veins. Here we show, for the first time, that the orientation of the magnetic fabric of fault pseudotachylytes indicates both direction and sense of seismic slip. The magnetic fabric, acquired in a manner similar to that of other magmas, arises in this case from the asymmetric preferred orientation of paramagnetic grains during viscous shear of the friction melt. This kinematic information, coupled with fault plane orientation and generation vein thickness, provides new and critical insight for the earthquake focal mechanism. The magnetic fabric of pseudotachylytes therefore not only constitutes a valuable kinematic criterion for these fault rocks, but also could expand our knowledge of prehistoric seismic events.
ISSN: 0091-7613

hal-01217133
https://hal.archives-ouvertes.fr/hal-01217133
DOI : 10.1130/G36587.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The timing of E–W extension of the Tibetan plateau provides a test of mechanical models of the geodynamic evolution of the India–Asia convergence zone. In this work we focus on the Kung Co half graben (Southern Tibet, China), bounded by an active N–S normal fault with a minimum vertical offset of 1600 m. To estimate the onset of normal faulting we combined high and medium temperature (U–Pb, Ar/Ar) and low temperature ((U–Th)/He) thermochronometry of the Kung Co pluton, a two-mica granite of the northern Himalayan granitic belt that outcrop in the footwall of the fault. Biotite and muscovite Ar/Ar ages , are close from each other [not, vert, similar 16 Ma ± 0.2 (Ms) and not, vert, similar 15 ± 0.4 Ma (Bt)], which is typical of fast cooling. The zircon and apatite (U–Th)/He ages range from 11.3 to 9.6 Ma and 9.9 to 3.7 Ma respectively. These He ages are indicative of (1) fast initial cooling, from 11.3 to not, vert, similar 9 Ma, gradually decreasing with time and (2) a high geothermal gradient (not, vert, similar 400 °C/km), close to the surface at not, vert, similar 10 Ma. The Kung Co pluton was emplaced at about 22 Ma (U–Pb on zircon) at less than 10 km depth and 520–545 °C. Subsequent to its shallow emplacement, the pluton underwent fast thermal re-equilibration ending around 7.5 Ma, followed by a period of slow cooling caused either by the end of the thermal re-equilibration or by very slow exhumation (0.02–0.03 mm/yr) from not, vert, similar 7.5 Ma to at least 4 Ma. In either case the data suggest that the exhumation rate increased after 4 Ma. We infer this increase to be related to the initiation of the Kung Co normal fault. A critical examination of previously published data show that most not, vert, similar N–S Tibetan normal faults may have formed less than 5 Ma ago rather than in the Miocene as assumed by several authors. Such a young age implies that E–W extension is not related to the Neogene South Tibetan magmatism (25 to 8 Ma). Consequently, models relating E–W extension to magmatism, such as convective removal of the lower lithosphere, may be inappropriate. We rather think that this extension is related with local accommodation of boundary forces and displacements.
ISSN: 0012-821X

hal-00311791
https://hal.archives-ouvertes.fr/hal-00311791
DOI : 10.1016/j.epsl.2007.01.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seventy percent of breast tumors express the estrogen receptor (ER), which is generally considered to predict a better outcome relative to ER-negative tumors, as they often respond to antiestrogen therapies. During cancer progression, mammary tumors can escape from estrogen control, resulting in the acquisition of invasive properties and resistance to treatment. ER expression is a dynamic phenomenon and is finely regulated at numerous levels, including the gene, mRNA, and protein levels. As a consequence, many molecular mechanisms have been implicated in modulating ER activity and estrogen signaling in mammary cancer. In fact, one-third of ER-positive breast cancer cells do not respond to first-line endocrine therapies, and a large subset of relapsing tumors retain ER expression. Increased knowledge of these mechanisms has led to the development of better prognostic methods and targeted therapies for patients; however, additional research is still needed to improve patient survival. In this chapter, we focus on the signaling pathways leading to changes in or loss of ER activity in breast cancer progression.
ISSN: 0083-6729

hal-00874313
https://hal.archives-ouvertes.fr/hal-00874313
DOI : 10.1016/B978-0-12-416673-8.00004-6
PUBMED : 23810005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A dense, local network of 30 geodetic markers covering a 50 × 60 km2 area in the southwestern European Alps (Briançon region) has been temporarily surveyed in 1996, 2006 and 2011 by GPS. The aim is to measure the current deformation in this seismically active area. The study zone is characterized by a majority of extensional and dextral focal mechanisms, along north–south to N160 oriented faults. The combined analysis of the three measurement campaigns over 15 years and up to 16 years of permanent GPS data from the French RENAG network now enables to assess horizontal velocities below 1 mm/year within the local network. The long observation interval and the redundancy of the dense campaign network measurement help to constrain a significant local deformation pattern in the Briançon region, yielding an average E–W extension of 16 ± 11 nanostrain/year. We compare the geodetic deformation field to the seismic deformation rate cumulated over 37 years, and obtain good coherencies both in amplitude and direction. Moreover, the horizontal deformation localized in the Briançon region represents a major part of the Adriatic-European relative plate motion. However, the average uplift of the network in an extensional setting needs the presence of buoyancy forces in addition to plate tectonics.
ISSN: 0264-3707

hal-01119724
https://hal.archives-ouvertes.fr/hal-01119724
DOI : 10.1016/j.jog.2015.02.001

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This paper investigates the orientation and sources of stress in the forearc of the Cascadia subduction zone in southwest British Columbia, using Bayesian inversion results from focal mechanism data and comparing results with GPS derived short-term strain rates. The subduction margin in this region includes a change in orientation from N-S in Washington State to NW-SE in British Columbia. Over 1000 focal mechanisms from North American crustal earthquakes have been calculated to identify the dominant style of faulting, and ∼600 were inverted to estimate the principal stress orientations and the stress ratio. Our results indicate the maximum horizontal compressive stress orientation changes with distance to the trench, from approximately margin-normal along the coast to approximately margin-parallel 100-150 km inland from the coast. Comparing stress orientations with GPS data, we relate the margin-normal stress direction to subduction-related strain rates due to the locked interface between the North American and Juan de Fuca plates just west of Vancouver Island. Further from the margin the plates are coupled less strongly, and the margin-parallel maximum horizontal compressive stress in the North American Plate relates to the northward push of the Oregon Block, which is also observed in the horizontal shortening direction of the residual strain rates, after the subduction component is removed.
ISSN: 0148-0227

hal-00853734
https://hal.archives-ouvertes.fr/hal-00853734
DOI : 10.1029/2010JB008003