Éditeur(s) : HAL CCSD American Physical Society (APS)
Résumé : International audience
Diffusion in natural and engineered media is quantified in terms of stochastic models for the heterogeneity-induced fluctuations of particle motion. However, fundamental properties such as ergodicity and self-averaging and their dependence on the disorder distribution are often not known. Here, we investigate these questions for diffusion in quenched disordered media characterized by spatially varying retardation properties, which account for particle retention due to physical or chemical interactions with the medium. We link self-averaging and ergodicity to the disorder sampling efficiency Rn, which quantifies the number of disorder realizations a noise ensemble may sample in a single disorder realization. Diffusion for disorder scenarios characterized by a finite mean transition time is ergodic and self-averaging for any dimension. The strength of the sample to sample fluctuations decreases with increasing spatial dimension. For an infinite mean transition time, particle motion is weakly ergodicity breaking in any dimension because single particles cannot sample the heterogeneity spectrum in finite time. However, even though the noise ensemble is not representative of the single-particle time statistics, subdiffusive motion in q≥2 dimensions is self-averaging, which means that the noise ensemble in a single realization samples a representative part of the heterogeneity spectrum.
ISSN: 2470-0053

hal-01622668
https://hal.archives-ouvertes.fr/hal-01622668
https://hal.archives-ouvertes.fr/hal-01622668v2/document
https://hal.archives-ouvertes.fr/hal-01622668/file/russian2017.pdf
DOI : 10.1103/PhysRevE.96.022156

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we propose a theoretical approach to test the validity of the isomechanical analogues for post-perovskite structures. Intrinsic plastic properties are evaluated for three materials exhibiting a post-perovskite phase: MgSiO3, MgGeO3 and CaIrO3. Dislocation properties of each structure are determined using the Peierls-Nabarro model based on first-principles calculations of generalised stacking fault and the plastic properties are extended to crystal-preferred orientations using a visco-plastic self-consistent method. This study provides intrinsic parameters of plastic deformation such as dislocation structures and Peierls stresses that can be directly compared between the three materials. It appears that it is very difficult to draw any simple conclusions on polycrystalline deformation simply by comparing single crystal properties. In particular, contrasting single crystal properties of MgSiO3 and CaIrO3 lead to similar crystal-preferred orientation of the polycrystal aggregates.
ISSN: 0031-9201

hal-00420104
https://hal.archives-ouvertes.fr/hal-00420104
DOI : 10.1016/j.pepi.2008.04.003

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context and aim : This study aimed to examine the effect of the tension wood G‐layer on the viscoelastic properties of wood. Methods : Tension wood and opposite wood samples were obtained from six French Guianese tropical rainforest species (Sextonia rubra, Ocotea guyanensis, Inga alba, Tachigali melinoni, Iyranthera sagotiana and Virola michelii); the tension wood of the former three of these species had a Glayer, whilst the tension wood from the latter three had no Glayer. Tensile dynamic mechanical analysis (DMA) was performed on green never dried wood samples in the longitudinal direction with samples submerged in a water bath at a temperature (30°C) and frequency (1 Hz) representative of the conditions experienced by wood within a living tree. Then, DMA was repeated with samples conditioned to an air-dried state. Finally, samples were oven-dried to measure longitudinal shrinkage. Results : Tension wood did not always have a higher longitudinal storage (elastic) modulus than opposite wood from the same tree regardless of the presence or absence of a G‐layer. For the species containing a G‐layer, tension wood had a higher damping coefficient and experienced a greater longitudinal shrinkage upon drying than opposite wood from the same species. No difference was found in damping coefficients between tension wood and opposite wood for the species that had no G‐layer. Conclusion : It is proposed that the different molecular composition of the G-layer matrix has an influence on the viscoelasticity of wood, even if a biomechanical gain is not yet clear. This study shows that rheological properties and longitudinal shrinkage can be used to detect the presence of a G‐layer in tension wood.
ISSN: 1286-4560

hal-00677460
https://hal.archives-ouvertes.fr/hal-00677460
https://hal.archives-ouvertes.fr/hal-00677460/document
https://hal.archives-ouvertes.fr/hal-00677460/file/Clair2.pdf
DOI : 10.1007/s13595-011-0164-1

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
The vibration damping coefficient (tanδ) of wood is an important property for acoustical uses, including musical instruments. Current difficulties in the availability of some of the preferred species call for diversification, but this comes up against the lack of systematic damping coefficient data. * Keeping in mind the possible factors affecting tanδ, could we predict its variations between species, by using indicators that are either easily measured and/or readily available for many species? * Vibrational properties, equilibrium moisture content and colorimetric parameters were assessed on 94 wood types belonging to 76 species. Experimental results were then related to data on chemical contents and physical properties from the CIRAD database. The "standard" relationship between tanδ and specific modulus of elasticity (E'/ρ) explained only half of the variations. Deviations from this trend were correlated to extractives content, yet effects were not directly quantitative. Damping deviations were also correlated to colour and moisture-related properties, especially so with fibre saturation point. * By taking into account a combination of moisture-related properties, colour - or extractives content, and the "standard" relationship between tanδ and E'/ρ, we could propose simple predictive models which explain up to 89% of observed variations in tanδ between 48 species.
ISSN: 1286-4560

hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338/document
https://hal.archives-ouvertes.fr/hal-00808338/file/Physico-chemical_indicators_Bremaud_al.pdf
DOI : 10.1051/forest/2010032

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Extractives can affect vibrational properties tanδ (damping coefficient) and E'/ρ (specific Young's modulus) but this is highly dependent on species, compounds, and cellular locations. This paper investigates such effects for African Padauk (Pterocarpus soyauxii Taub.), a tropical hardwood with high extractives content and a preferred material for xylophones. 5 groups of 26 heartwood specimens with large, yet comparable, ranges in vibrational properties were extracted in different solvents. Changes in vibrational properties were set against yields of extracts and evaluation of their cellular location. Methanol (ME) reached most of compounds (13%), located about half in lumen and half in cell-wall. Water solubility was extremely low. tanδ and E'/ρ were very strongly related (R2≥0.93), but native wood had abnormally low values of tanδ, while extraction shifted this relation towards higher tanδ values. ME extracted heartwood became in agreement with the average of many species, and close to sapwood. Extractions increased tanδ as much as 60%, irrespective of minute moisture changes or of initial properties. Apparent E'/ρ was barely changed (+2% to -4%) but, after correcting the mass contribution of extracts, was in fact slightly reduced (down to -10% for high E'/ρ), and increasingly so for specimens with low initial values of E'/ρ.
ISSN: 0043-7719

hal-00804236
https://hal.archives-ouvertes.fr/hal-00804236
https://hal.archives-ouvertes.fr/hal-00804236/document
https://hal.archives-ouvertes.fr/hal-00804236/file/Effect_extractives_vibrational_properties_Bremaud_al.pdf
DOI : 10.1007/s00226-010-0337-3

Éditeur(s) : HAL CCSD
Résumé : This paper presents a collection of wood species with important uses in musical instruments, in reference to historical and geographical cultural specificities, with ranges of viscoelastic vibrational properties by species. Data combine our experimental characterizations and extensive literature review, gathered in a specific relational database. An overview of vibrational properties' distribution on c.400 species is introduced. Two case studies of wood choices for a given function in different epochs or regions are presented: woods for European historical bows, and woods for idiophone bodies in different continents. Trends are contrasted: very different properties associated to historical changes in the first case; some common features over different regions in the second one.
Proceedings of the International Conference of COST Action IE0601 Wood Science for the Preservation of Cultural Heritage
Braga, Portugal

hal-00808403
https://hal.archives-ouvertes.fr/hal-00808403
https://hal.archives-ouvertes.fr/hal-00808403/document
https://hal.archives-ouvertes.fr/hal-00808403/file/Vibrational_properties_tropical_wood_Bremaud_al.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
It is well known that sedimentary rocks having same porosity can have very different pore size distribution. The pore distribution determines many characteristics of the rock, among which its transport properties are often the most useful. Multifractal analysis is a powerful tool that is increasingly used to characterize the pore space. In this study, we performed multifractal analysis of pore distribution on simulated sedimentary rocks using the relaxed bidisperse ballistic deposition model (RBBDM). The RBBDM can generate a 3-D structure of sedimentary rocks of variable porosity by tuning the fraction p of particles of two different sizes. We also performed multifractal analysis on two samples of real sedimentary rock to compare with the simulation studies. One sample, an oolitic limestone is of high porosity (40 per cent) while the other is a reefal carbonate of low porosity, around 7 per cent. 2-D sections of X-ray microtomographs of the real rocks were stacked sequentially to reconstruct the real rock specimens. Both samples show multifractal character. The results from analysis of real rock agree quite well with the simulated structure of low porosity. The simulated rock of high porosity showed a weak multifractal nature though the real rock sample of similar porosity was found to be strongly multifractal. We propose a ‘structure parameter’ ξ which is a function of porosity and the generalized dimensions, and controls the transport properties of the rock.
ISSN: 0956-540X

hal-01174142
https://hal.archives-ouvertes.fr/hal-01174142
DOI : 10.1093/gji/ggu417

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Advances in groundwater storage monitoring are crucial for water resource management and hydrological processes understanding. The evaluation of water storage changes (WSC) often involve point measurements (observation wells, moisture probes, etc.), which may be inappropriate in heterogeneous media. Over the past few years, there has been an increasing interest in the use of gravimetry for hydrological studies. In the framework of the GHYRAF (Gravity and Hydrology inAfrica) project, 3 yr of repeated absolute gravity measurements using a FG5-type gravimeter have been undertaken at Nalohou, a Sudanian site in northern Benin. Hydrological data are collected within the long-term observing system AMMA-Catch. Once corrected for solid earth tides, ocean loading, air pressure effects, polar motion contribution and non-local hydrology, seasonal gravity variations reach up to 11 μGal, equivalent to a WSC of 260-mm thick infinite layer of water. Absolute temporal gravity data are compared to WSC deduced from neutron probe and water-table variations through a direct modelling approach. First, we use neutronic measurements available for the whole vertical profile where WSC occur (the vadose zone and a shallow unconfined aquifer). The RMSD between observed and modelled gravity variations is 1.61 μGal, which falls within the error bars of the absolute gravity data. Second, to acknowledge for the spatial variability of aquifer properties, we use a 2-D model for specific yield (Sy) derived from resistivity mapping and Magnetic Resonance Soundings (MRS). The latter provides a water content (θMRS) known to be higher than the specific yield. Hence, we scaled the 2-D model of θMRS with a single factor (α). WSC are calculated from water-table monitoring in the aquifer layer and neutronic measurements in the vadose layer. The value of α is obtained with aMonte-Carlo sampling approach, minimizing the RMSD between modelled and observed gravity variations. This leads to α = Sy/θMRS = 0.63 ± 0.15, close to what is found in the literature on the basis of pumping tests experiments, with a RMSD value of 0.94 μGal. This hydrogeophysical experiment is a first step towards the use of time-lapse gravity data as an integrative tool to monitor interannual WSC even in complicated subsurface distribution.
ISSN: 0956-540X

hal-00821181
https://hal.archives-ouvertes.fr/hal-00821181
DOI : 10.1093/gji/ggt146

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Peridotite xenoliths brought up to the surface by the volcanism of the Kerguelen Islands represent a mantle that has been affected by a high degree of partial melting followed by intense melt percolation above the Kerguelen plume. These xenoliths are therefore particularly suitable to investigate effects of melt-rock interaction on crystallographic fabrics (lattice-preferred orientation (LPO)) of peridotite minerals and on the LPO-induced seismic properties of peridotites above a mantle plume. We have studied a suite of 16 ultramafic samples representative of different degrees of partial melting and magma-rock interaction among which the protogranular harzburgites are the least metasomatised xenoliths and dunites are the ultimate stage of metasomatism. Olivine LPO is characterized by high concentration of [010] axes perpendicular to the foliation and [100] axes close to the lineation or distributed in the foliation plane in harzburgites, whereas the high concentration of [100] axes is parallel to the lineation and [010] axes is perpendicular to the assumed foliation in dunites. Olivine LPO in harzburgites is interpreted as being due to a deformation regime in axial compression or transpression. The fabric strength of olivine decreases progressively from protogranular to poikilitic harzburgites and finally to dunites, for which it remains nevertheless significant (J index 3.8). Seismic properties calculated from LPO of minerals indicate that metasomatism at higher melt/rock ratio lowers the P wave velocities. The most significant difference between harzburgites and dunites corresponds to the distribution of S wave anisotropy. Harzburgites display the maximum of anisotropy within the foliation plane and the minimum of anisotropy perpendicular to the foliation plane, whereas the lowest anisotropy is parallel to the lineation for dunites. These modifications of seismic properties as a result of metasomatic processes may induce seismic heterogeneities in the mantle above the Kerguelen plume. In addition, assuming a lithospheric mantle primarily harzburgitic and structured with a horizontal foliation, the seismic properties calculated for the Kerguelen xenoliths reconcile the rather high anisotropy evidenced by the horizontally propagating surface waves with the apparent isotropy revealed by the absence of splitting of vertically propagating teleseismic SKS waves recorded by the GEOSCOPE Kerguelen station.
ISSN: 1525-2027

hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222/document
https://hal.archives-ouvertes.fr/hal-00366222/file/bascou_Kerguelen_2007GC001879_hal.pdf
DOI : 10.1029/2007GC001879

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To better understand the microstructural evolution of a "serpentinized" mantle rock and the influence of various hydrous phases on the seismic properties of the mantle wedge, we have conducted the detailed microstructural analyses of a sample of tremolite-chlorite-antigorite schist collected from the Moses Rock dike (central part of the Colorado Plateau). We performed differential effective media (DEM) modelling to study the effect of three hydrous phases forming two-phase aggregates with olivine, considering the crystallographic preferred orientation (CPO) of each phase and the shape ratio of the hydrous phases. We have demonstrated that in a partially serpentinized peridotite, the olivine CPO characteristic of [100](010) dislocation glide is still preserved, and the high-temperature asthenospheric flow is preserved with a foliation normal to that of antigorite schist. The transformation of olivine into antigorite occurs predominantly (~ 75%) by the relationship (100)ol || (001)atg with [001]ol || [010]atg, with the (010)ol || (001)atg and [001]ol || [010]atg relationship observed in areas of weak antigorite CPO. Chlorite results from the phase transformation of olivine in a relatively static environment, as shown by the correlation between the olivine-chlorite CPOs with (100)ol || (100)ch, (010)ol || (001)ch and (001)ol || (010)ch. The fluid percolation that caused the localized metasomatism and partial hydration of the mantle occurred possibly along trans-lithospheric shear zones. The presence of chlorite induces the most important drop on the P-wave velocities and may help to explain some local low velocities in the fore-arc mantle wedges, but is unlikely to be of global importance due to its very high Vp/Vs ratio ~ 1.9. On the other hand, antigorite is the only phase that causes important modification on the propagation directions of P and S-waves, and the only phase to explain the polarization of the fastest shear waves parallel to the subduction trench.
ISSN: 0040-1951

hal-00858061
https://hal.archives-ouvertes.fr/hal-00858061
DOI : 10.1016/j.tecto.2013.03.022

Éditeur(s) : HAL CCSD
Résumé : International audience
The most active deep convection area in the western Mediterranean Sea is located in the Gulf of Lions. Recent studies in this area provides some insights on the complexity of the physical dynamics of convective regions, but very little is known about their impacts on the biogeochemical properties. The CASCADE (CAscading, Surge, Convection, Advection and Downwelling Events) cruise, planed in winter 2011, give us the opportunity to compare vertical profiles of properties sampled either during stratified conditions or after/during a convection event. In the present study, we focus on the distributions of the carbonate system properties (mainly total alkalinity, AT; and total dissolved inorganic carbon, CT) because, in the context of the climate change, deep convection areas are suspected to significantly increase the sequestration of anthropogenic CO2 (CANT). Given its limited size, the impact of the Mediterranean Sea on the global carbon budget is probably minor but this marginal sea can be used as a laboratory to better understand carbon sequestration and its transfer to the basin interior by deep convection processes. Distributions of AT and CT, both measured from bottle samples, and that of CANT (estimated with the TrOCA approach) are first analyzed in the light of other key properties (salinity, temperature, and dissolved oxygen). An objective interpolation procedure is then applied to estimate CT and AT from CTD measured properties. With this procedure, the vertical resolution goes from a maximum of 32 samples per station to one property estimate every meter (more detailed distributions are obtained). Results provide arguments to conclude that CANT is rapidly transferred to the deepest layer due to deep convection events. During deep convection events, the increase of CANT in the water column is positively correlated to that of potential density and oxygen content. The challenge of quantifying the amount of sequestered carbon is however not resolved due to the complexity and the highly dynamical nature of the convective regions. Deep convection in the Gulf of Lions, in parallel with cascading along the continental slope, could thus potentially explain the very high levels of both CANT and acidification estimated in the deep layers of the western Mediterranean Sea.
Deep Sea Research Part I: Oceanographic Research Papers

hal-01336725
https://hal-univ-perp.archives-ouvertes.fr/hal-01336725
DOI : 10.1016/j.dsr.2016.04.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimentally Assisted Molecular Modelling (EAMM) is an original approach for predicting the structure of organic micro-crystals and deducing their habit in the presence of various solvents and additives. It is applied here in the case of n-octylamino-nitrobenzoxadiazole (nOA-NBD), a fluorescent compound. This general approach is first of all described and validated by its blind application to three known and closely-related crystals. Then, the whole process is applied to predict the molecular crystal generated by n-octylamino-NBD, including the molecule conformation, its structure (cell parameters, molecular packing, X-ray powder diagrams) and its theoretical plus actual habits in the presence of a solvent (p-xylene) and two additives (acetic acid and n-dodecane). The conformation of the predicted molecule is validated by comparison with two similar molecules embedded in observable crystals. Then, the choice between two proposed structures (with the same energy and two equiprobable packings) is based on the comparison between experimental and re-computed X-ray powder diffraction diagrams, and also on the interpretation of an actual TEM image in the light of the proposed cell parameters. This choice is confirmed by the comparison between the vapour-grown face development (proposed by the BFDH or the attachment energy models) and the actual face development in a pure solvent. Finally, the actual habit deduced from comparing the crystal attachment energy with the adsorption energy of solvent or additive molecules is validated by SEM images of NBD micro-crystals in presence of the solvent alone or in presence of both additives. In conclusion, the EAMM approach appears to be a decisive tool for quickly simulating structural and habit properties of the molecular crystals, accessible or not by experimentation. Thus, a numerical selection of molecules becomes possible in view of deriving organic materials with predetermined properties, such as the fluorescence properties of the compound considered in the present study.
ISSN: 0022-0248

hal-00857894
https://hal.archives-ouvertes.fr/hal-00857894
DOI : 10.1016/j.jcrysgro.2011.07.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the deformation mechanisms and the seismic properties of 10 eclogite samples from different localities (Alps, Norway, Mali and eastern China) through the analysis of their microstructures and lattice-preferred orientations (LPO). These samples are representative of various types and intensity of deformation under eclogitic metamorphic conditions. Omphacite and garnet LPO were determined from electron backscatter diffraction (EBSD) technique. Garnet appears to be almost randomly oriented whereas omphacite develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the (010)-poles concentrated sub-perpendicular to the foliation. In order to analyze the deformation mechanisms that produced such omphacite LPO, we compare our observations to LPO simulated by viscoplastic self-consistent numerical models. A good fit to the measured LPO is obtained for models in which the dominant slip systems are 1/2h110i{11 ¯ 0}, [001] {110} and [001] (100). Dominant activation of these slip systems is in agreement with TEM studies of naturally deformed omphacite. Seismic properties of eclogite are calculated by combining the measured LPO and the single crystal elastic constants of omphacite and garnet. Although eclogite seismic anisotropies are very weak (less than 3% for both P-and S-wave), they are generally characterized by a maximum P-wave velocity sub-parallel to the lineation and by a minimum velocity approximately normal to foliation. The mean P-and S-wave velocities are high (respectively, 8.6 and 4.9 km/s). The S-wave anisotropy pattern displays complex relationships with the structural frame but the fast polarization plane generally tends to be parallel to the foliation. Calculated reflection coefficients show that an eclogite/crust interface is generally a good reflector (Rc > 0.1), whereas an eclogite body embedded in the upper mantle would be hardly detectable.
ISSN: 0040-1951

hal-01389715
http://hal.univ-reunion.fr/hal-01389715
http://hal.univ-reunion.fr/hal-01389715/document
http://hal.univ-reunion.fr/hal-01389715/file/Bascou_eclo-sismo_tphy2001_hal.pdf
DOI : 10.1016/S0040-1951(01)00156-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The seismic (elastic) properties of the crust have been modelled using hypothetical polycrystals with typical crustal compositions and commonly measured petrofabrics. This modelling allows us to better evaluate and quantify the crustal contribution to splitting of teleseismic SKS-waves. Mafic rocks such as anorthosite or pyroxene-bearing gabbros have complex S-waves properties, i.e. with small shear-wave anisotropies (< 3%) and without clear relationships between the fast shear-wave polarization plane orientations and the fabric. On the other hand foliated felsic rocks such as gneisses or schists and mafic rocks such as amphibole-bearing gabbros are strongly birefringent (anisotropies greater than 5%) and exhibit clear relationships with the structure. Biotite and amphibole preferred orientations clearly play a major rote in shear-wave splitting in crustal rocks. We show strong correlations between the orientation of the foliation and the amplitude of the delay time. Maximum delay time is systematically observed for waves propagating parallel to the foliation. The fast shear-wave is furthermore polarized parallel to the foliation plane. We calculate a delay time of about 0.1-0.2 s per 10 km of crustal rocks.
ISSN: 0031-9201

hal-01389713
http://hal.univ-reunion.fr/hal-01389713
http://hal.univ-reunion.fr/hal-01389713/document
http://hal.univ-reunion.fr/hal-01389713/file/Barruol_SKS_crust_PEPI1993_hal.pdf
DOI : 10.1016/0031-9201(93)90161-2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The structural parameters of fluorinated nanocarbons presenting different shapes, i.e. spherical, tubular and discotic are investigated and correlated to their tribological properties. Different fluorination rates of graphitized carbon blacks (0D), carbon nanofibres (1D) and a mixture of carbon nanodiscs and nanocones (2D) were achieved under pure molecular fluorine gas flow (direct fluorination). Raman spectrometry, X-ray diffraction and 19F solid state nuclear magnetic resonance underline similar structure and nature of the C-F bonds (covalent) for equivalent fluorine contents. In spite of the similarities of physical-chemical properties at equivalent fluorine contents, the tribological properties of the fluorinated nanocarbons differ. Those properties are discussed taking into account the role of the fluorine content and location of the fluorine atoms in the decrease of the interparticle interactions and in the cleavage of the external fluorocarbon layers to form the tribofilm. Finally, the effect of the shape is discussed.
ISSN: 0022-1139

hal-00787267
https://hal.archives-ouvertes.fr/hal-00787267

Éditeur(s) : HAL CCSD
Résumé : This thesis has been conducted on a fractured crystalline basement located in Ploemeur (South of Brittany, France). The detailed study of this basement requires a good understanding of their internal structures, namely their intrinsic properties, flow mode, density and fractures distribution. This work is focused on the petrophysical characterization of the granitic formations. Physical properties were determined from downhole geophysical measurements and images, and petrophysical measurements with thin sections made for each mini-core in the laboratory. Fresh-altered schist and fresh-altered granite separated by a normal angle fault are the main lithology of the Ploemeur crystalline basement. The results showed that the petrophysical properties were function of both porosity variation and degree of alteration and that the pore-space topology was found to be porositydependent. This thesis introduces a new formula between electrical resistivity and porosity. In addition, the laboratory measurements of Ploemeur revealed that seismic wave velocity was a function not only of porosity, but also of the predominant pore type. In general, the pore aspect ratio inverted from velocity measurements were classified roughly into crack shape. In the Ploemeur crystalline basement, the downhole geophysical measurements and images were used to measure changes in physical and chemical properties in the borehole fluid and the bedrock surrounding the boreholes. The effective integration of different geophysical methods, hydrogeological tests and lithological description was the best way to characterize the fractures in the crystalline basement, and is critical for a suitable estimation of fluid circulation.
Le socle cristallin fracturé, situé à Ploemeur (Bretagne sud, France) est l'objet de ce travail de thèse. L'étude détaillée du socle nécessite une bonne compréhension de la structure interne, à savoir les propriétés intrinsèques, le mode d'écoulement, la densité et la distribution des fractures. Ce travail de thèse est consacré à la caractérisation pétrophysique des formations granitiques. Les propriétés physiques ont été déterminées à partir de l'interprétation des données de mesures de géophysique en forage, des images de paroi du puits et des mesures pétrophysiques réalisées sur carottes en laboratoire. Afin de replacer les mesures dans leur contexte lithologique, une lame mince a été analysée pour chaque mini-carotte. Les formations lithologiques rencontrées dans le socle cristallin de Ploemeur sont des schistes et granites sains et altérés, ces deux lithologies étant séparées par une zone de faille. Les résultats ont montré que les propriétés pétrophysiques des roches étaient fonction à la fois de la variation de la porosité et du degré d'altération des roches et que la topologie de l'espace poreux était fortement dépendante de la porosité. Cette thèse introduit une nouvelle formule entre la résistivité électrique et la porosité. De plus, les mesures en laboratoire sur les échantillons de Ploemeur révèlent que les vitesses sismiques ne sont pas seulement fonction de la quantité de porosité, mais aussi fonction de facteur de forme. Ce dernier a été calculé sur les échantillons du socle de Ploemeur à partir des vitesses acoustiques. Les résultats ont montré que la porosité est de forme fissurale. L'intégration des données issues des images optiques et acoustiques, des mesures de géophysique en forage, et de la description des carottes a permis d'étudier de façon détaillée la géologie et l'hydrodynamique du socle de Ploemeur. L'intégration effective de ces différentes méthodes avec les tests hydrogéologiques ressort comme la meilleure façon de caractériser les fractures et les circulations en eau dans le socle.
https://tel.archives-ouvertes.fr/tel-00444175

Droits : info:eu-repo/semantics/OpenAccess
tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175/document
https://tel.archives-ouvertes.fr/tel-00444175/file/thesebelghoul.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either "artificially", or by natural extractives.
ISSN: 0043-7719

hal-00804242
https://hal.archives-ouvertes.fr/hal-00804242
https://hal.archives-ouvertes.fr/hal-00804242/document
https://hal.archives-ouvertes.fr/hal-00804242/file/Anisotropy_wood_variational_properties_Bremaud_al_2011.pdf
DOI : 10.1007/s00226-010-0393-8

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This work presents seismic properties derived from a detailed microstructural study of supra-subduction mantle xenoliths extracted by the active Avacha volcano in the southern Kamchatka arc. These peridotites underwent low-stress deformation and syn- to late-kinematic reactive percolation of hydrous melts or fluids leading to local orthopyroxene enrichment and dispersion of the olivine CPO in the shallow mantle wedge. All samples show an axial [ 100] olivine CPO implying fast S-wave polarization parallel to the flow direction in the mantle. Orthopyroxene-enrichment by reactive fluids/melts percolation lowers the Vp/Vs ratio, but cannot explain the Vp/Vs ratios <1.7 mapped in the Japan and Andes forearc mantle. These low Vp/Vs ratios may however be explained by considering the intrinsic anisotropy of the peridotites.
ISSN: 0094-8276

hal-00512636
https://hal.archives-ouvertes.fr/hal-00512636
DOI : 10.1029/2010GL043450

Éditeur(s) : ESA Publication
Résumé : Satellite remote sensing has emerged as an essential and necessary observing system to acquire global information about the state of the ocean. Complemented with in situ observing networks, the ultimate goals are to be able to make accurate estimates of selected key sets of geophysical variables, with the intention of either making operational predictions across time and spatial boundaries, or advancing fundamental knowledge through development of empirical relationships and theoretical models. For satellite oceanography, improvements are then constantly being sought in our understandings of the geophysical processes, the sensor physics, the electromagnetic and microwave properties and interactions at the complex air-sea interface. Challenges appear as unlimited as the variety of sea surface dynamics and boundary layer meteorological conditions with their broad range of spatial and temporal scales across the globe. To face these challenges, numerous efforts took places over the passed decade to build an ever-increasing quality, quantity, duration and integration of ocean observations. In parallel, simulation capabilities largely improved. All these efforts are then all critically calling for improved methodologies to better structure the wealth of information that is made readily accessible. This latter aspect is a very demanding new component for future multidisciplinary scientific research. Major innovations to consolidate sensor data repositories, to automate tailored queries, to extract, reveal and quantify relationships will then closely associate computer science developments and applied statistics with comprehensive theoretical and experimental thematic studies.
Proceedings of OceanObs'09: Sustained Ocean Observations and Information for Society (ESA Publication), 2010

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00029/14046/11241.pdf
DOI:10.5270/OceanObs09.pp.12
http://archimer.ifremer.fr/doc/00029/14046/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1