Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Accumulating evidence suggests that developmental exposure to environmental chemicals may modify the course of brain development, ultimately leading to neuropsychiatric / neurodegenerative disorders later in life. In the present study, we assessed the impact of one of the most frequently used pesticides in both residential and agricultural applications - the synthetic pyrethroid cypermethrin (CYP) - on developmental neurotoxicity (DNT). Female mice were perinatally exposed to low doses of CYP (5 and 20 mg/kg body weight) from gestation to postnatal day 15. Behavioral analyses were performed during the offspring's early life and during adulthood. Postnatal analyses revealed that perinatal exposure to CYP disturbed motor development without modifying sensory and communicative skills. We found that later in life, CYP-exposed offspring expressed maladaptive behaviors in response to highly challenging tasks and abnormal sociability. Transcriptomic analyses performed in the offspring's brain at the end of the exposure, highlighted mitochondrial dysfunction as a relevant pathomechanism underlying CYP-induced DNT. Interestingly, several genes involved in proteostasis maintenance were also shown to be dysregulated suggesting that alterations in biogenesis, folding, trafficking and degradation of proteins may significantly contribute to CYP-related DNT. From a regulatory perspective, this study highlights that behavioral and transcriptomic analyses are complementary tools providing useful direction for better DNT characterization, and as such, should be used together more systematically.
ISSN: 1932-6203

hal-01616489
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01616489
DOI : 10.1371/journal.pone.0184475
PUBMED : 29020013

Éditeur(s) : HAL CCSD
Résumé : International audience
The published literature related to distributed parameter systems theory is quite large, and it is not feasible in a single book to give a detailed review on the wide historical development of all of it. Our choice of what to cover was motivated by the following consideration. Since distributed parameter systems evolve in time and space, the research investigations on their analysis and control focus on considering the whole system domain for any study. We feel strongly that within this research field, animportant consideration was missing; that of considering that the system may give raise to prescribed subdomains (regions) where one has to achieve an objective. This is the case of so many applications ranging from engineering to life sciences. For that reason, covering classical prerequisite in analysis and control areas, we have devoted the book to the extension of the classical distributed parameter results to regional ones.Students of mathematics do not come into contacts with distributed parameter systems during their classes. They are introduced to them when they start research and often they are influenced by the knowledge and the advice of experimented scientists. This was our case at the very beginning of these research investigations in the mid 70’s. We would liketo express our special thanks to many of them and mainly late Professor Anthony J. Pritchard (University of Warwick, GB) and late Professor J.L. Lions (College de France) who were so encouraging in front of our determination in driving an academic carrier. We also express our thanks to our co-workers and research students. We wish to acknowledge the feedback from all those who took courses based on various parts of this book.This book may be used by graduate students in mathematics, engineering, physics, and even by students from other fields such as life or environmental sciences. This book may also be used as an information source for researchers and education professionals. We assume that the readers already know the basic concepts of analysis and control of distributedparameter systems.
https://hal.archives-ouvertes.fr/hal-01297188

ISBN : 978-2-35412-140-2
hal-01297188
https://hal.archives-ouvertes.fr/hal-01297188

Éditeur(s) : Elsevier Science Bv
Résumé : Underwater video techniques are increasingly used in marine ecology studies. Technological progress regarding video cameras, sensors (such as sounders), battery life and information storage make these techniques now accessible to a majority of users. However, diver-based underwater visual censuses, and catch and effort data, remain the most commonly used for observing coastal biodiversity and species. In this paper, we review the underwater video techniques that have been developed since the 1950s to investigate and/or monitor coastal biodiversity. Techniques such as remote underwater video, whether baited or not, diver-operated video and towed video are described, along with corresponding applications in the field. We then analyse the complementary of techniques, first from studies comparing video techniques with other observation techniques, whether video-based or not, and second by documenting their respective cost efficiencies. These findings are discussed with respect to current challenges in monitoring and investigating coastal biodiversity. Video should be more often considered and used, either in addition to or as an alternative to diver-based, fishing and acoustic techniques, as it may be particularly suited for monitoring coastal biodiversity in a variety of areas and on larger scales than hitherto and within an ecosystem-based approach to management and conservation.
Fisheries Research (0165-7836) (Elsevier Science Bv), 2014-06 , Vol. 154 , P. 44-62

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00181/29274/27901.pdf
DOI:10.1016/j.fishres.2014.01.019
http://archimer.ifremer.fr/doc/00181/29274/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Due to shallow penetration of millimeter waves (MMW) and convection in liquid medium surrounding cells, the problem of accurate assessment of local MMW heating in in vitro experiments remains unsolved. Conventional dosimetric MMW techniques, such as infrared imaging or fiber optic (FO) sensors, face several inherent limits. Here we propose a methodology for accurate local temperature measurement and subsequent specific absorption rate (SAR) retrieval using microscale thermocouples (TC). SAR was retrieved by fitting the measured initial temperature rise to the numerical solution of an equivalent thermal model. It was found that the accuracy of temperature measurement depends on thermosensor size, that is, the smaller TC, the more accurate the temperature measurement. SAR determined using TC with lead diameters of 25 and 75m demonstrated 98.5% and 80.4% match with computed SAR, respectively. However, both TC provided the same temperature rises in long run (>10min). FO probe failed to measure adequately local heating both for short and long exposures due to the relatively large size of the probe sensor (400m) and time constant (0.6s). Calculated SAR in the cell monolayer was almost two times lower than that in the surrounding liquid. It was shown that the impact of the cell monolayer on heating due to its small thickness (5 to 10m) can be considered as negligible. Moreover, we demonstrated the possibility of accurate measurement of MMW-induced thermal pulses (up to 10 degrees C) using 25m TC. Bioelectromagnetics. 38:11-21, 2017. (c) 2016 Wiley Periodicals, Inc.
ISSN: 0197-8462

hal-01436768
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01436768
DOI : 10.1002/bem.21999
PUBMED : 27571392

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Sensitive instruments like strainmeters and tiltmeters are necessary for measuring slowly varying low amplitude Earth deformations. Nonetheless, laser and fibre interferometers are particularly suitable for interrogating such instruments due to their extreme precision and accuracy. In this paper, a practical design of a simple pendulum borehole tiltmeter based on laser fibre interferometric displacement sensors is presented. A prototype instrument has been constructed using welded borosilicate with a pendulum length of 0.85 m resulting in a main resonance frequency of 0.6 Hz. By implementing three coplanar extrinsic fibre Fabry-Perot in-terferometric probes and appropriate signal filtering, our instrument provides tilt measurements that are insensitive to parasitic deformations caused by temperature and pressure variations. This prototype has been installed in an underground facility (Rustrel, France) where results show accurate measurements of Earth strains derived from Earth and ocean tides, local hydro-logic effects, as well as local and remote earthquakes. The large dynamic range and the high sensitivity of this tiltmeter render it an invaluable tool for numerous geophysical applications such as transient fault motion, volcanic strain and reservoir monitoring.
ISSN: 0956-540X

hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967/document
https://hal.archives-ouvertes.fr/hal-01265967/file/HCS1.pdf
DOI : 10.1093/gji/ggv358

Éditeur(s) : HAL CCSD
Résumé : International audience
This communication reports on a field experiment carried out on a microtidal beach in Camargue, France. The analysis is built on the initial work presented by Sous et al. (2016) on swash-groundwater dynamics. The analysis of a cross-shore network of buried pressure sensors allows to monitor the watertable dynamics over the full 2013-2014 winter season. The pressure head gradients are observed to be primarily seaward, forced by a higher level at the landward boundary. The groundwater flux is driven by the relative fluctuations of Still Water Level and inland elevations. Rain and tides have a little effect. A nearly isolated groundwater circulation is driven by wave activity below the swash zone whatever the overall watertable gradient. Estimations of beach groundwater discharge over the Gulf of Beauduc reveal the importance of beach groundwater in the exchanges between coastal aquifer and open sea.
Coastal Dynamics 2017
Helsingor, Denmark

hal-01562908
https://hal.archives-ouvertes.fr/hal-01562908

Éditeur(s) : HAL CCSD IRD
Résumé : International audience
The number of satellites and remote sensing sensors devoted to earth observation becomes increasingly high, providing more and more data and especially images. In the same time the access to such a data and to the tools to process them has been considerably improved. In the presence of such data flow - and regarding the necessity to follow up and predict environmental and societal changes in highly dynamic socio-environmental contexts - we need automatic image interpretation methods. This could be accomplished by exploring some strengths of artificial intelligence. Our main idea consists in inducing classification rules that explicitly take into account structural knowledge, using Aleph, an Inductive Logic Programming (ILP) system. We applied our proposed methodology to three land cover/use maps of the French Guiana littoral. One hundred and forty six classification rules were induced for the 39 land-cover classes of the maps. These rules are expressed in first order logic language which make them intelligible and interpretable by non-experts. A ten-fold cross validation gave average values for classification accuracy, specificity and sensibility equal to, respectively, 98.82 %, 99.65% and 70%. The proposed methodology could be valuably exploited to automatically classify new objects and/or help operators using object-based classification procedures.
Symposium of the Latin American Society for Remote Sensing and Spatial Information Systems (SELPER)
Cayenne, French Guiana

ird-00797337
http://hal.ird.fr/ird-00797337
http://hal.ird.fr/ird-00797337/document
http://hal.ird.fr/ird-00797337/file/Bayoudh_et_al_2012_FP_SELPER-086.pdf
IRD : fdi:010058343

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
LiDAR (Light Detection And Ranging) remote sensing has been shown to be a good technique for the estimation of forest parameters such as canopy heights and above ground biomass. Whilst airborne LiDAR data are in general very dense but only available over small areas due to the cost of their acquisition, spaceborne LiDAR data acquired from the Geoscience Laser Altimeter System (GLAS) have a coarser acquisition density associated with a global cover. It is therefore valuable to analyze the integration relevance of canopy heights estimated from LiDAR sensors with ancillary data such as geological, meteorological, and phenological variables in order to propose a forest canopy height map with good precision and high spatial resolution.In this study, canopy heights extracted from both airborne and spaceborne LiDAR, were first extrapolated from available environmental data (e.g. geology, slope, vegetation indices, etc.). The estimated canopy height maps using random forest (RF) regression from the airborne or GLAS calibration datasets showed similar precisions (RMSE better than 6.5 m). In order to improve the precision of the canopy height estimates regression-kriging (kriging of random forest regression residuals) was used. Results indicated an improvement in the RMSE (decrease from 6.5 to 4.2 m) for the regression-kriging maps from the GLAS dataset, and from 5.8 to 1.8 m for the regression-kriging map from the airborne LiDAR dataset. Finally, in order to investigate the impact of the spatial sampling of future LiDAR missions on the precision of canopy height estimates, six subsets were derived from the initial airborne LiDAR dataset with flight line spacing of 5, 10, 20, 30, 40 and 50 km (corresponding to 0.29, 0.11, 0.08, 0.05, 0.04, and 0.03 points/km² respectively). Results indicated that using the regression-kriging approach achieved a precision of 1.8 m on the canopy height map with flight line spacing of 5 km and achieved an average RMSE of 4.8m for the configuration for the 50 km flight line spacing.
ISSN: 2072-4292

hal-01361343
https://hal.archives-ouvertes.fr/hal-01361343
https://hal.archives-ouvertes.fr/hal-01361343/document
https://hal.archives-ouvertes.fr/hal-01361343/file/mt2016-pub00048036.pdf
DOI : 10.3390/rs8030240

Éditeur(s) : HAL CCSD Paris : Muséum national d'histoire naturelle
Résumé : International audience
En prenant comme exemple le gobie à crête Lophogobius cyprinoides (Pallas, 1770), les éléments (canaux et pores et canaux sensoriels muqueux, et papilles sensorielles) composant le système latéral (SL) ont été observés selon plusieurs méthodes de préparation. Des échantillons ont été préparés soit pour observation en microscopie électronique à balayage (MEB), soit pour observation en microscopie photonique après immersion dans du liquide de fixation "Bouin Hollande" ou dans du formol à 4% en eau de mer avant coloration au KMnO4 (technique traditionnelle). Les résultats obtenus avec le MEB et le Bouin Hollande sont meilleurs qu'avec la méthode traditionnelle et présentent une plus grande reproductibilité. Bien que moins rapide et plus onéreuse, la méthode d'évaluation au MEB offre une finesse d'observation qui n'est pas obtenue au Bouin Hollande en raison de la limite du grandissement en microscopie optique. Si l'ultrastructure des papilles sensorielles ne peut être observable qu'au MEB, le SL des poissons Gobiidae peut être facilement étudié de manière approfondie avec les deux méthodologies proposées dans ce travail. Elles sont à préconiser car plus fiables que la technique traditionnelle consistant en une immersion dans une solution de permanganate de potassium et d'acide sulfurique. Celle-ci détériore partiellement les papilles sensorielles du SL rendant son analyse plus délicate.
ISSN: 0399-0974

hal-00749624
https://hal.univ-antilles.fr/hal-00749624

Éditeur(s) : HAL CCSD
Résumé : International audience
This communication reports on a field experiments carried out on the Ouano reef barrier, New Caledonia. The analysis is based on a cross-shore network of pressure sensors deployed across the reef flat and within the lagoon. Confirming existing observations, the measurements show the strong filtering role of the reef barrier on the incoming wave energy The swell energy is dissipated and transferred toward lower frequencies, including the so-called infragravity (IG) and very low frequency (VLF) waves. During energetic event (Hs=4.2m), IG and VLF significant wave heights on the reef flat are observed to reach 1.2 and 0.7m, respectively. A variety of long waves modes are observed on the reef, combining standing and progressive-dissipative modes. In any cases, the VLF and IG waves are much more developed over and close to the reef flat than further inside the lagoon.
Coastal Dynamics 2017
Helsingor, Denmark

hal-01562927
https://hal.archives-ouvertes.fr/hal-01562927

Éditeur(s) : HAL CCSD
Résumé : LPSC14037
Scientific data collected with modern sensors or dedicated detectors exceed very often the perimeter of the initial scientific design. These data are obtained more and more frequently with large material and human efforts. A large class of scientific experiments are in fact unique because of their large scale, with very small chances to be repeated and to superseded by new experiments in the same domain: for instance high energy physics and astrophysics experiments involve multi-annual developments and a simple duplication of efforts in order to reproduce old data is simply not affordable. Other scientific experiments are in fact unique by nature: earth science, medical sciences etc. since the collected data is "time-stamped" and thereby non-reproducible by new experiments or observations. In addition, scientific data collection increased dramatically in the recent years, participating to the so-called "data deluge" and inviting for common reflection in the context of "big data" investigations. The new knowledge obtained using these data should be preserved long term such that the access and the re-use are made possible and lead to an enhancement of the initial investment. Data observatories, based on open access policies and coupled with multi-disciplinary techniques for indexing and mining may lead to truly new paradigms in science. It is therefore of outmost importance to pursue a coherent and vigorous approach to preserve the scientific data at long term. The preservation remains nevertheless a challenge due to the complexity of the data structure, the fragility of the custom-made software environments as well as the lack of rigorous approaches in workflows and algorithms. To address this challenge, the PREDON project has been initiated in France in 2012 within the MASTODONS program: a Big Data scientific challenge, initiated and supported by the Interdisciplinary Mission of the National Centre for Scientific Research (CNRS). PREDON is a study group formed by researchers from different disciplines and institutes. Several meetings and workshops lead to a rich exchange in ideas, paradigms and methods. The present document includes contributions of the participants to the PREDON Study Group, as well as invited papers, related to the scientific case, methodology and technology. This document should be read as a "facts finding" resource pointing to a concrete and significant scientific interest for long term research data preservation, as well as to cutting edge methods and technologies to achieve this goal. A sustained, coherent and long term action in the area of scientific data preservation would be highly beneficial.
http://hal.in2p3.fr/in2p3-00959072

in2p3-00959072
http://hal.in2p3.fr/in2p3-00959072
http://hal.in2p3.fr/in2p3-00959072/document
http://hal.in2p3.fr/in2p3-00959072/file/PREDON_Scientific_Data_Preservation_2014.pdf

Éditeur(s) : HAL CCSD Presses université de Laval
Résumé : International audience
This article aims to specify the challenges related to adapting the Disability Creation Process (DCP) model to the experience of chronic disease, specifically Human immunodeficiency virus (HIV). In this perspective, a conceptual clarification is proposed because the DCP is mainly used to study populations in situations of disability due to motor, sensory, mental or behavioral disabilities. However, this model seems to be able to adequately read the specific experience of HIV, and help to understand differently life trajec-tories of people living with HIV (PLHIV). Indeed, HIV infection, despite its status as a "chronic disease", continues to contribute to the risk of social isolation. Body modifications induced by the disease or its treatment has an impact on how others view PLHIV. They expose the visibility of HIV status and, ultimately, the fear of social exclusion. In this respect, the analysis of the DCP may allow us to understand the varia-tions in the quality of social participation and identify the phases of vulnerability by focusing on body image in particular induced by the infection or treatments. This approach provides the opportunity for new insight into the influence of social environments (particularly health management or community support) with re-gards to the lifestyle and the daily experiences of socially disadvantaged people.
Cet article tente de spécifier les enjeux d’une adaptation du modèle du Processus de production du handicap (PPH) au vécu de la maladie chronique, et plus spécifiquement du virus de l’immunodéfi-cience humaine (VIH). Dans cette perspective, un éclaircissement conceptuel est proposé, car le PPH a principalement été utilisé pour étudier les populations vivant des situations de handicap liées à des incapa-cités motrices, sensorielles, intellectuelles ou comportementales. Ce modèle semble toutefois en mesure de renouveler la lecture de l’expérience spécifique du VIH, et d’aider à saisir autrement les trajectoires de vie des personnes vivant avec le VIH (PVVIH). En effet, l’infection au VIH, malgré son statut de « maladie chronique », demeure associée à un risque d’isolement social. Les modifications corporelles induites par la maladie ou par son traitement confronte les PVVIH au regard de l’autre. Elles exposent à la visibilité du statut sérologique et, in fine, à la peur de l’exclusion sociale. Dans ce cadre, l’analyse du Processus de production du handicap peut permettre de comprendre les variations de la qualité de la participation sociale et d’identifier les phases de vulnérabilité en s’intéressant notamment au rapport au corps induit par l’infection et les traitements. Cette approche offre l’opportunité d’un nouvel éclairage sur le poids des envi-ronnements sociaux (notamment des dispositifs de prises en charge sanitaire ou d’accompagnement communautaire) sur les habitudes de vie et l’expérience quotidienne d’un public fragilisé socialement.
ISSN: 1499-5549

hal-01681423
https://hal.archives-ouvertes.fr/hal-01681423

Éditeur(s) : HAL CCSD
Résumé : International audience
The aim of this study is to suggest two automated techniques able to help medical staff to detect earlier than usual some diseases using wireless sensor networks (WSNs). In this context, a patient is equipped with physical sensors (for temperature, pressure, ..). This WSN will perform some computations and will run an alarm when a disease is suspected. The first technique uses a population protocol to handle data exchanged between motes and provides an efficient algorithm to suggest that a disease is diagnosed on a patient. The algorithm is distributed, i.e., the decision may be done by any mote dealing with the disease detection. The second technique uses a token algorithm where, some motes, denoted as masters. Each of them is in charge of deciding if a specific disease occurs. This technique is not totally distributed but enhances the network efficiency regarding to the energy consumption, the time execution and the number of exchanged messages.
Proceedings of The Ninth IEEE International Symposium on Networking Computing and Applications
Cambridge, MA, United States

hal-00519599
https://hal.archives-ouvertes.fr/hal-00519599

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : On the basis of an existing multiparameter borehole fluid sensor(p, T Cw, pH, Eh), a new downhole tool designed for 200 bars and 75 degrees C was developed to measure the spontaneous electrical potential in situ with great precision (better than a mu V). To this end, the new sensor is based on the use of unpolarizable Pb/PbCl2 electrodes either at the surface or downhole. In situ testing has demonstrated a capacity to identify several subsurface sources of natural electrical potential such as diffusion ones (membrane potential in the presence of clays, Fickian processes due to pore fluid salinity gradients), or else the electrokinetic mechanisms with gradients in pore fluid pressure. As a consequence, Multi-Sensors Electrical Tool (MuSET) might be used as an "electrical flow meter" sensitive to both horizontal and vertical fluid flow in a vertical borehole.
ISSN: 1631-0713

hal-00445251
https://hal.archives-ouvertes.fr/hal-00445251
DOI : 10.1016/j.crte.2009.07.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The number of satellites and sensors devoted to Earth observation has become increasingly elevated, delivering extensive data, especially images. At the same time, the access to such data and the tools needed to process them has considerably improved. In the presence of such data flow, we need automatic image interpretation methods, especially when it comes to the monitoring and prediction of environmental and societal changes in highly dynamic socio-environmental contexts. This could be accomplished via artificial intelligence. The concept described here relies on the induction of classification rules that explicitly take into account structural knowledge, using Aleph, an Inductive Logic Programming (ILP) system, combined with a multi-class classification procedure. This methodology was used to monitor changes in land cover/use of the French Guiana coastline. One hundred and fifty-eight classification rules were induced from 3 diachronic land cover/use maps including 38 classes. These rules were expressed in first order logic language, which makes them easily understandable by non-experts. A 10-fold cross-validation gave significant average values of 84.62%, 99.57% and 77.22% for classification accuracy, specificity and sensitivity, respectively. Our methodology could be beneficial to automatically classify new objects and to facilitate object-based classification procedures.
ISSN: 0098-3004

hal-01369822
https://hal.archives-ouvertes.fr/hal-01369822
https://hal.archives-ouvertes.fr/hal-01369822/document
https://hal.archives-ouvertes.fr/hal-01369822/file/CAGEO-D-13-00538R1_article.pdf
DOI : 10.1016/j.cageo.2014.08.013

Éditeur(s) : HAL CCSD
Résumé : International audience
The published literature related to distributed parameter systems theoryis quite large, and it is not feasible in a single book to give a detailedreview on the wide historical development of all of it. Our choice of whatto cover was motivated by the following consideration. Since distributedparameter systems evolve in time and space, the research investigationson their analysis and control focus on considering the whole system domainfor any study. We feel strongly that within this research field, animportant consideration was missing; that of considering that the systemmay give raise to prescribed subdomains (regions) where one has toachieve an objective. This is the case of so many applications rangingfrom engineering to life sciences. For that reason, covering classical prerequisitein analysis and control areas, we have devoted the book to theextension of the classical distributed parameter results to regional ones.Students of mathematics do not come into contacts with distributedparameter systems during their classes. They are introduced to themwhen they start research and often they are influenced by the knowledgeand the advice of experimented scientists. This was our case at the verybeginning of these research investigations in the mid 70’s. We would liketo express our special thanks to many of them and mainly late ProfessorAnthony J. Pritchard (University of Warwick, GB) and late Professor J.L. Lions (College de France) who were so encouraging in front of our determinationin driving an academic carrier. We also express our thanksto our co-workers and research students. We wish to acknowledge thefeedback from all those who took courses based on various parts of thisbook.This book may be used by graduate students in mathematics, engineering,physics, and even by students from other fields such as life orenvironmental sciences. This book may also be used as an informationvi Avant-propossource for researchers and education professionals. We assume that thereaders already know the basic concepts of analysis and control of distributedparameter systems.
https://hal.archives-ouvertes.fr/hal-01297261

ISBN : 978-2-35412-140-2
hal-01297261
https://hal.archives-ouvertes.fr/hal-01297261

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD Institute of Electrical and Electronics Engineers (IEEE)
Résumé : International audience
Non-alcoholic fatty liver disease (NAFLD) is defined as an excessive accumulation of fat in the liver in the absence of excessive drinking of alcohol. Initially considered as benign and self-limited, NAFLD may progress to the malignant stage of non-alcoholic steatohepatitis (NASH) characterized by degenerate hepatocellular ballooning and lobular inflammation. NASH can lead to hepatic fibrosis and ultimately to cirrhosis and hepatocellular carcinoma. Unfortunately, the transition from NAFLD to NASH is difficult to detect so far. In this paper, we propose to evaluate the characterization of NASH using mid infrared fiber evanescent wave spectroscopy on blood serum. We used an heuristic variable selection method and a generalized linear model to classify NAFLD and NASH spectra. The obtained results proved that this technique is a promising non-invasive and simple diagnosis tool for NASH.
ISSN: 1557-170X

inserm-01476033
http://www.hal.inserm.fr/inserm-01476033
http://www.hal.inserm.fr/inserm-01476033/document
http://www.hal.inserm.fr/inserm-01476033/file/EMBC_2016_CameraReady.pdf
DOI : 10.1109/EMBC.2016.7591507

Éditeur(s) : HAL CCSD
Résumé : International audience
Semantic web standards, tools, ontologies and related technologies have considerably matured in the recent years. Nowadays, accessing a wide catalogue of biological, social, environmental, and ecological data sources helps stakeholders working on biodiversity to answer their complex questions. Will the real time access to web resources effectively support the definition of strategies to conserve and manage biodiversity? How might semantic web technologies help us to handle the complex and heterogeneous big data related to biodiversity? The workshop aims to identify the key challenges faced by the bioinformatics community, discuss potential solutions and identify the opportunities emerging from the trans-disciplinary interactions between Plant Science and Informatics experts. Therefore, we expect the bioinformatics experts to explain how they apply semantic web standards and tools to their scientific topic, from biology, agriculture, agro-ecology, genomics, environmental studies, to social sciences, citizen sciences. Research papers presenting various aspects of semantic web technologies applied to biodiversity data, ranging from position papers to implemented systems descriptions and their evaluation, will be selected. We are particularly interested in the use of the semantic technologies to design and develop systems that supports research on agricultural and wild biodiversity conservation and management for food security. Examples may include strategies for resilience to climate change pressures, sustainability of productive ecosystems, ecosystems services monitoring or territories management, rather than systems supporting only research on climate patterns or soil erosion.
http://hal-lirmm.ccsd.cnrs.fr/lirmm-00831757

lirmm-00831757
http://hal-lirmm.ccsd.cnrs.fr/lirmm-00831757
http://hal-lirmm.ccsd.cnrs.fr/lirmm-00831757/document

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014