Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The first studies of the 16S rRNA gene diversity of the bacterial symbionts found in lucinid clams did not clarify how symbiotic associations had evolved in this group. Indeed, although species-specific associations deriving from a putative ancestral symbiotic association have been described (coevolution scenario), associations between the same bacterial species and various host species (opportunistic scenario) have also been described. Here, we carried out a comparative molecular analysis of hosts, based on 18S and 28S rRNA gene sequences, and of symbionts, based on 16S rRNA gene sequences, to determine as to which evolutionary scenario led to modern lucinid/symbiont associations. For all sequences analyzed, we found only three bacterial symbiont species, two of which are harbored by lucinids colonizing mangrove swamps. The last symbiont is the most common and was found to be independent of biotope or depth. Another interesting feature is the similarity of ctenidial organization of lucinids from the Philippines to those described previously, with the exception that two bacterial morphotypes were observed in two different species (Gloverina rectangularis and Myrtea flabelliformis). Thus, there is apparently no specific association between Lucinidae and their symbionts, the association taking place according to which bacterial species is present in the environment.
ISSN: 0168-6496

hal-00743766
https://hal.univ-antilles.fr/hal-00743766
DOI : 10.1111/j.1574-6941.2010.00989.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study investigated cerebral and muscle hemoglobin oxygen saturation (tissue oxygen index, TOI) in children with sickle cell anemia (SS), sickle cell hemoglobin C disease (SC) and healthy children (AA). TOI was measured by near-infrared spectroscopy (NIRS) and spectral analysis of the TOI variability was used to assess flowmotion and vasomotion. Arterial oxyhemoglobin saturation (SpO2), hemorheological and hematological parameters were also measured in SS and SC children. Both TOI were lower in SS compared to both AA and SC children, with SC exhibiting lower values than AA children. Cerebral vasomotion expressed in absolute values was enhanced in SS compared to AA and SC children. Muscle vasomotion did not differ between the three groups. Hematocrit, SpO2 and red blood cell deformability were positively associated with cerebral TOI in SS children. We demonstrated that 1) cerebral and muscle TOI were markedly decreased in SS children while the decrease of TOI was milder in SC children, 2) cerebral TOI level was associated with several biological markers in SS children only and 3) cerebral vasomotion was enhanced in SS, possibly to counterbalance the effects of chronic cerebral hypoxia.
ISSN: 1079-9796

inserm-01519106
http://www.hal.inserm.fr/inserm-01519106
http://www.hal.inserm.fr/inserm-01519106/document
http://www.hal.inserm.fr/inserm-01519106/file/2017%2C%20Charlot%20-%20Cerebral%20and%20muscle%20microvascular%20oxygenation%20in%20children%20with%20sickle%20celle%20disease.pdf
DOI : 10.1016/j.bcmd.2017.03.015

Éditeur(s) : HAL CCSD
Résumé : International audience
In orogens, shortening is mainly accommodated by thrusts, which constitute preferential zones for fluid–rock interactions. Fluid flow, mass transfer, and mineralogical reactions taking place along thrusts have been intensely investigated, especially in sedimentary basins for petroleum and uranium research. This study combines petrological investigations, mineralogical quantifications, and geochemical characterizations with a wide range of analytical tools with the aim of defining the fluid properties (nature, origin, temperature, and redox) and fluid–host rock interactions (mass transfers, recrystallization mechanisms, and newly formed synkinematic mineralization) in the Pic-de-Port-Vieux thrust fault zone (Pyrenees, Spain). We demonstrate that two geochemically contrasted rocks have been transformed by fluid flow under low-grade metamorphism conditions during thrusting. The hanging-wall Triassic red pelite was locally bleached, while the footwall Cretaceous dolomitic limestone was mylonitized. The results suggest that thrusting was accompanied by a dynamic calcite recrystallization in the dolomitic limestone as well as by leaching of iron via destabilization of iron oxides and phyllosilicate crystallization in the pelite. Geochemical and physical changes highlighted in this study have strong implications on the understanding of the thrust behavior (tectonic and hydraulic), and improve our knowledge of fluid–rock interactions in open fluid systems in the crust.
Contributions to Mineralogy and Petrology

hal-01575548
https://hal-univ-fcomte.archives-ouvertes.fr/hal-01575548
DOI : 10.1007/s00410-017-1394-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : The dense hydrous magnesium silicate called the D phase is the most likely candidate to recycle hydrogen into the lower mantle in subduction zones. As seismology represents the preferred method to detect this mineral in subduction zones, the single crystal elastic tensor has been calculated using first principle methods. A triple cell (View the MathML source) was used to account for an ordered ideal composition of the D phase to lower mantle pressures. The elastic tensor of the mineral at ambient conditions is predicted to be C11 = 387.7, C33 = 287.7, C44 = 100.4, C12 = 108.0, C13 = 51.1, C14 = − 14.6 in GPa with bulk modulus at zero pressure Ko = 163 GPa and a statistical error of about 4.0 GPa for all constants. The pressure derivatives of the elastic constants have been determined to pressure of 80 GPa. Our tensor correctly predicts the published experimental measurements of linear compressibility along the a- and c-axes, the logarithmic pressure derivative of the c/a axial ratio and bulk modulus at zero pressure. It contradicts the experimentally measured elastic tensor reported by (Liu, L.-G., Okamoto, K., Yang, Y.-J., Chen, C.-C., Lin, C.-C., 2004. Elasticity of single-crystal phase D (a dense hydrous magnesium silicate) by Brillouin spectroscopy. Solid State Commun. 132, 517–520), which fails to reproduce the experimental compressibility data. Using the elastic constants and density predicted to 85 GPa, the seismic anisotropy of P- and S-waves has been calculated as a function of pressure. The single crystal has high P-wave velocities and shear wave splitting in the basal plane below 20 GPa. At high pressures, the maximum P-wave velocities have threefold symmetry normal to a-axes in the basal plane, whereas the maximum shear wave splitting is parallel to a-axes with twofold symmetry. The D phase has high Vp and Vs anisotropy at ambient pressure, 17.6% for Vp and 19.9% for Vs. The Vp anisotropy decreases with increasing pressure to about 30 GPa, while it remains constant at 8% from 30 to 85 GPa. The Vs anisotropy decreases to 17% at 20 GPa and then increases to 22% at 85 GPa. The isotropic velocity ratios of S to P (Rs/p), bulk sound to S (Rphi/s) and density to S (Rρ/s) are calculated as a function of pressure. The Rs/p shows very little variation with pressure with low value of 0.6, whereas both Rphi/s and Rρ/s increase with pressure to peak values of 2.8 and 2.0 respectively at about 60 GPa. The presence of the D phase in subducted horizontal ‘stagnant' plates in the circum Pacific could contribute to a number of seismic observations, such as the observed velocity heterogeneity at depths between 500 and 1000 km and the fast S-waves travelling horizontally with horizontal polarization in this depth range. Further the lower density of the D phase compared with anhydrous minerals could influence buoyancy of the hydrated ‘stagnant' slabs. The transformation of the D phase to perovskite plus ferripericlase during thermal annealing may be responsible for horizontal slab seismogenesis.
ISSN: 0012-821X

hal-00406379
https://hal.archives-ouvertes.fr/hal-00406379
DOI : 10.1016/j.epsl.2007.04.053

Éditeur(s) : HAL CCSD Elsevier
Résumé : Understanding the pattern in spatial distribution of soil microbial processes is critical to understand the environmental factors that regulate them as well as to scale up these processes to ecosystem. Soil samples from a I ha tropical rainforest plot (Paracou, French Guiana) were analyzed according a nested sampling approach using different separation distances ranging from 0.4 to 40 m. The variability of substrate induced respiration (SIR) and of denitrification enzyme activity (DEA) was characterized in relation to various soil properties (total C and N contents, NIRS related index of soil organic matter quality, SOMQ and index of tree influence potential, IP). The variability of SIR and DEA was higher than that of environmental properties. The patterns of accumulated variance as a function of distance varied among the soil properties. The variability of SIR and DEA mainly occurred at small (1 m) scale (and at the 10-40 m-scales for SIR), probably reflecting the quality of litter input that results of the influence of local assemblage of different tree species, though changes in the soil N and C contents. Indeed, total soil C and N contents explained the microbial properties at every scale. Coefficients of codispersion showed that neither SOMQ nor IP did correlate with SIR and DEA, and confirmed that total C and N contents explained microbial properties in a scale dependent and complex manner. Such spatial dependency underlines the importance of soil heterogeneity in this tropical forest with implications for sampling strategies when studying the microbial processes and their response to disturbances. (C) 2012 Elsevier B.V. All rights reserved.
ISSN: 0016-7061

hal-01032409
https://hal.archives-ouvertes.fr/hal-01032409
DOI : 10.1016/j.geoderma.2012.12.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : The uppermost mantle in back arc regions is the site of complex interactions between partial melting, melt percolation, and fluid migration. To constrain these interactions and evaluate their consequences on geochemical cycles, we carried out an in situ trace element and water study of a suite of spinel peridotite xenoliths from two regions of the Japan back arc system, Ichinomegata (NE Japan) and Oki-Dogo (SW Japan), using LA-ICPMS and FTIR spectrometry, respectively. This study provides the first full dataset of trace element and hydrogen compositions in peridotites including analyses of all their main constitutive silicate minerals: olivine, orthopyroxene and clinopyroxene. The Ichinomegata peridotites sample a LREE-depleted refractory mantle (Mg# olivine = 0.90; Cr# spinel = 0.07–0.23; Yb clinopyroxene = 7.8–13.3 × C1-chondrite, and La/Yb clinopyroxene = 0.003–0.086 × C1-chondrite), characterized by Th-U positive anomalies and constant values of Nb/Ta. The composition of the studied Ichinomegata samples is consistent with that of an oceanic mantle lithosphere affected by cryptic metasomatic interactions with hydrous/aqueous fluids (crypto-hydrous metasomatism). In contrast, the Oki-Dogo peridotites have low Mg# olivine (0.86–0.93) and a broad range of compositions with clinopyroxene showing “spoon-shaped” to flat, and LREE-enriched patterns. They are also characterized by their homogeneous compositions in the most incompatible LILE (e.g., Rb clinopyroxene = 0.01–0.05 × primitive mantle) and HFSE (e.g., Nb clinopyroxene = 0.01–2.16 × primitive mantle). This characteristic is interpreted as resulting from various degrees of melting and extensive melt-rock interactions. FTIR spectroscopy shows that olivine in both Ichinomegata and Oki-Dogo samples has low water contents ranging from 2 to 7 ppm wt. H2O. In contrast, the water contents of pyroxenes from Ichinomegata peridotites (113–271 ppm wt. H2O for orthopyroxene, and 292–347 ppm wt. H2O for clinopyroxene) are significantly higher than in Oki-Dogo peridotites (9–35 ppm wt. H2O for orthopyroxene, and 15–98 ppm wt. H2O for clinopyroxene). This indicates a relationship between melt-rock interaction and water concentrations in pyroxenes. Our study suggests that the water content of the Japan mantle wedge is controlled by the late melt/fluid/rock interactions evidenced by trace element geochemistry: a mechanism triggered by magma-rock interactions may have acted as an efficient dehydrating process in the Oki-Dogo region while the Ichinomegata mantle water content is controlled by slab-derived crypto-hydrous metasomatism.
ISSN: 0016-7037

hal-01553105
https://hal.archives-ouvertes.fr/hal-01553105
DOI : 10.1016/j.gca.2017.03.042

Éditeur(s) : HAL CCSD
Résumé : International audience
The corrosion rates in the presence of some indole derivates, namely, 9H-pyrido[3,4-b]indole (norharmane) and 1-methyl-9H-pyrido[3,4-b]indole (harmane), as inhibitors of C38 steel corrosion inhibitor in 1 M HCl solution, were measured by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques, in the range of temperatures from 25 to 55∘C. Results obtained revealed that the organic compounds investigated have inhibiting properties for all temperatures. The inhibition was assumed to occur via adsorption of the indole molecules on the metal surface. Adsorption of indole derivates was found to follow the Langmuir isotherm. The apparent activation energies, enthalpies, and entropies of the dissolution process and the free energies and enthalpies for the adsorption process were determined by potentiodynamic polarization and electrochemical impedance. The fundamental thermodynamic functions were used to collect important information about indole inhibitory behaviour.
international Journal of Corrosion

hal-01683120
https://hal.univ-antilles.fr/hal-01683120
DOI : 10.1155/2013/139798

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : The diamond anvil cell (DAC) is a fundamental device used to explore the properties of materials under extreme pressure and temperature (P/T) conditions. In the past years, simultaneous high P/T DAC experiments using the resistively heated DAC (RH-DAC) techniques have been developed for studying materials properties in a wide P/T range. However, the mechanical instability of metallic gaskets used for sample confinement at high P/T conditions remains a limiting factor for exploiting the accessible P/T range of the RH-DAC. In this study, we present a new gasket configuration that overcomes these limitations. It is based on an amorphous boron-epoxy mixture inserted in a rhenium gasket. We show how these gasket inserts stabilize the sample chamber over a wide P/T range, allowing monitoring sample properties using X-ray diffraction and absorption spectroscopy up to 50GPa and 1620K.
ISSN: 0895-7959

hal-01608425
https://hal.archives-ouvertes.fr/hal-01608425
DOI : 10.1080/08957959.2016.1245297
PRODINRA : 387347

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synthetic hydroxylated titanium-bearing and undoped MgO-buffered forsterite crystals were heated at atmospheric pressure in air at temperatures from 800 to 1200 °C to determine hydrogen diffusion as a function of the type of point-defect mechanism by which the hydroxyl is incorporated. OH-stretching bands, measured by infrared spectroscopy, were assigned to the four substitution mechanisms: Ti-clinohumite point defects, silicon and magnesium vacancies, and point defects associated with trivalent cations. In the experiments at 800 to 1000 °C, hydrous defects related to trivalent cations and Mg-vacancies disappear first in the Ti-doped forsterite, followed by the hydrous defects related to Ti and a fraction of the hydrated Si-vacancies. Measured bulk diffusion coefficients for hydrogen exchange related to the latter process are one order of magnitude slower than previously reported and with higher activation energy (View the MathML source296±14 kJmol−1). After the elimination of the defects related to Ti, the hydroxyl concentration related to Si-vacancies remained constant for the duration of the experiments. This observation is in agreement with the very slow diffusivity of hydrogen in Si-vacancies measured in the undoped MgO-buffered dehydroxylation experiments at higher temperatures (from 1000 to 1200 °C), which were ∼3 orders of magnitude slower than previously reported at 1000 °C, and with an activation energy of View the MathML source461±11 kJmol−1. Hydrogen diffusion in forsterite is far more complex than previously assumed. This complexity can be used to gain more information on the timescales of the processes causing olivine to lose its structural “water”, but quantitative modeling will require not only the knowledge of the intrinsic diffusivities of the different hydrous defects but also their relative proportions and the possible reactions between them.
ISSN: 0012-821X

hal-01172253
https://hal.archives-ouvertes.fr/hal-01172253
DOI : 10.1016/j.epsl.2014.01.055

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD
Résumé : International audience
In boundary lubrication regime, friction reduction and antiwear processes are associated to the presence of additives in the lubricating oils or greases. These processes are due to the formation of protective tribofilms resulting from chemical reactions between the additives and the sliding surfaces, in the physico-chemical conditions of the sliding contact. Conventional antiwear additives mainly consist of transition metal organo phosphate or thiophosphates which present a remarkable efficiency in the case of contacts between ferrous alloys. In the case of non reacting surfaces, these additives become inactive. Recently developped lubrication strategies consist in the use of dispersion in oils of nano additives able to build the protective tribofilm in the sliding contact without reaction with the surfaces. Carbon fluorinated phases, due to their lamellar structure and their high chemical stability even at relatively high temperature (400°C) represent interesting candidates as lubricant nano-additives subjected to present friction reduction, anti wear and anti corrosion actions. This work presents the tribologic behaviour of some carbon fluorinated derivatives such as graphite fluorides, fluorinated carbon nanofibers, fluorinated carbon nanodiscs and fluorinated carbon blacks. The influence, on the tribologic performances, of the structure of the initial carbon phases, of the fluorination rate (0
World Tribology Congress 2013
Torino, Italy

Droits : info:eu-repo/semantics/OpenAccess
hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514/document
https://hal.archives-ouvertes.fr/hal-00926514/file/Delbe_9783.pdf
OATAO : 9783

Résumé : L'objectif de cette thèse est de s'intéresser à la chimie des substances naturelles (extraction et caractérisation des molécules issues des forêts de Guyane) et d'étudier des extraits ou familles de molécules naturelles ayant des propriétés inhibitrices de la corrosion du zinc. Dans la première partie du document, un screening de plantes a été effectué. Celles dont les extraits ont présenté les propriétés inhibitrices les plus intéressantes - la Mansoa alliaceae et la Bagassa guianensis -ont été sélectionnées parmi les Il plantes étudiées. Dans la seconde partie du document, différentes techniques électrochimiques ont été utilisées- la spectroscopie d'impédance électrochimique (SEI) et la polarisationlinéaire (PL)- afin de calculer les taux d'inhibition et de remonter aux mécanismes réactionnels caractérisant l'inhibition. Ainsi, le rôle des paramètres tels que le mode d'extraction et le milieu corrosif (ASTM et NaCI3%) sur le taux d'inhibition ont été étudiés. Ces travaux ont débouché sur de nombreux résultats expérimentaux nouveaux et notamment un modèle dynamique prenant en compte l'efficacité de l'inhibiteur en fonction de sa concentration dans le milieu
The objective of this thesis is to focus on the chemistry of na tura! substances (extraction and characterization of molecules from forests of French Guiana) and to study extracts or families ofnatural molecules with inhibiting properties of zinc corrosion. In the first part of the document, a screening of plants was made. Those whose extracts have shown the most interesting potential inhibitors - the Mansoa alliaceae and Bagassa guianensis - were selected among the Il plants studied. In the second part of the paper, different electrochemical techniques were used - the electrochemical impedance spectroscopy (EIS) and linear polarization (LP) - to calculate the inhibition rate and to understand the reaction mechanisms characterizing the inhibition. Thus, the role of parameters such as the method of extraction and the corrosive medium (ASTM and NaCI3%) on the inhibition rate were studied. This work bas led to many new experimental results including a dynamic mode! taking into account the effectiveness of the inhibitor according to its concentration in the medium

http://www.theses.fr/2014AGUY0745/document

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gaps in their structure through which interlayer interactions are weak. The controlled variation of the distances and interactions between graphene layers by intercalation of electrophilic species in graphite is used in order to explore more deeply the friction reduction properties of low-dimensional compounds. Three graphite intercalation compounds with antimony pentachloride, iron trichloride and aluminium trichloride are studied. Their tribological properties are correlated to their structural parameters, and the interlayer interactions are deduced from ab initio bands structure calculations.
ISSN: 1023-8883

hal-00767639
https://hal.archives-ouvertes.fr/hal-00767639
https://hal.archives-ouvertes.fr/hal-00767639/document
https://hal.archives-ouvertes.fr/hal-00767639/file/Delbe_6330.pdf
DOI : 10.1007/s11249-012-9981-0

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
Wallaba (Eperua falcata) is a tropical wood which is known to have naturally low swelling characteristics. Samples of wallaba heartwood were subjected to differential solvent extraction. Wood pieces that were extracted with methanol experienced significantly higher swelling after rehydration from oven dry to 96% relative humidity in comparison to non-extracted samples and samples extracted with other solvents. Methanol soluble wallaba heartwood extract was purified by high pressure liquid chromatography and the compounds present were characterised by nuclear magnetic resonance spectroscopy. Methanol extract was found to contain a very high relative proportion of polar compounds which are proposed to bind to the polymeric cell wall by multiple hydrogen bonds restricting the association of water and therefore acting as natural anti-swelling agents.
ISSN: 0018-3830

hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942/document
https://hal.archives-ouvertes.fr/hal-00856942/file/Chemical_extractives_tropical_wood_Royer_al.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This work is concerned with the study of the tribologic properties of room temperature fluorinated graphite heat-treated under fluorine atmosphere. The fluorinated compounds all present good intrinsic friction properties (friction coefficient in the range 0.05–0.09). The tribologic performances are optimized if the materials present remaining graphitic domains (influenced by the presence of intercalated fluorinated species) whereas the perfluorinated compounds, where the fluorocarbon layers are corrugated (armchair configuration of the saturated carbon rings) present higher friction coefficients. Raman analyses reveal that the friction process induces severe changes in the materials structure especially the partial re-building of graphitic domains in the case of perfluorinated compounds which explains the improvement of μ during the friction tests for these last materials.
ISSN: 1023-8883

hal-00767637
https://hal.archives-ouvertes.fr/hal-00767637
https://hal.archives-ouvertes.fr/hal-00767637/document
https://hal.archives-ouvertes.fr/hal-00767637/file/Delbe_6329.pdf
DOI : 10.1007/s11249-009-9487-6

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have studied the phase transformation of forsterite to wadsleyite under shear stress at the Earth's transition zone pressure and temperature conditions. Two-step experiments were performed using a multi-anvil press. First, we hot pressed iron-free forsterite at 6 or 11 GPa and 1100 degrees C. Then we deformed a slab of this starting material using a direct simple shear assembly at 16 GPa and 1400 degrees C for 1, 15, 35, 40, or 60 min. Both the starting material and the deformed samples were characterized using optical and scanning electron microscopy including measurements of crystal preferred orientations (CPO) by electron back scattered diffraction (EBSD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The phase transformation occurs very rapidly, in less than 1 min, and metastable forsterite relics are not observed after deformation. The grain size of wadsleyite is slightly smaller than the forsterite starting material. The water contents obtained from FTIR analyses in forsterite and wadsleyite are 65-124 wt ppm H2O and 114-736 wt ppm H2O, respectively, which are well below water solubility at similar conditions in the presence of free water. Wadsleyite aggregates display weak CPO patterns with [1 0 0] axes concentrated at low angle to the shear direction, [0 1 0] axes perpendicular to the shear plane and nearly random [0 0 1] axes. Only a few dislocations were observed in wadsleyite with TEM. This observation is consistent with the assumption that most dislocations formed during the initial high-stress stages of these stress-relaxation experiments, were consumed in the phase transformation, probably enhancing the transformation rate. CPO patterns vary as a function of the water content: with increasing water content the density of [1 0 0] axes parallel to the shear direction decreases, and the density of [0 0 1] axes increases. Viscoplastic self-consistent modeling of CPO evolution using previously reported glide systems for wadsleyite, i.e., [1 0 0]{0 k 1} and 1/2 (1 1 1){1 0 1}, cannot reproduce the measured CPO, unless the [0 0 1](0 1 0) system, for which dislocations have not been observed by TEM, is also activated. In addition, wadsleyite grain growth suggests the participation of diffusion-assisted processes in deformation. Calculated anisotropies for P and S-waves using measured CPO are always below 1%. This very low anisotropy is due to both the low finite strain achieved in the experiments, which leads to weak wadsleyite CPO, and to the diluting effect of added majorite. The present experiments emphasize the importance of stress, grain size evolution and water content in the forsterite to wadsleyite phase transformation and subsequent deformation in the transition zone.
ISSN: 0031-9201

hal-00617430
https://hal.archives-ouvertes.fr/hal-00617430
DOI : 10.1016/j.pepi.2010.11.001

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Few studies have investigated the influence of environmental conditions on the within-treevariation in Eucalyptus wood traits. The genotype and environment effects and their interactionsinfluence the wood properties. Their evaluations are crucial to estimate the genotype values andto select with efficiency. Thus, the aim of this study was to better understand the effect ofground slope and wind speed on the spatial variation of basic density (ρ), stiffness (MOE) andmicrofibril angle (MFA) of Eucalyptus wood. Wood discs cut along the trunk were sampledfrom 150 six-year-old Eucalyptus grandis x E. urophylla hybrids growing in 3 contrastinggrowing conditions influenced by ground slope and wind regime. Near Infrared (NIR)calibrations previously developed for ρ, MOE and MFA were used to predict in our discs. 2-Dplots presenting the spatial variation of predicted wood traits were compared. The higher theground slope, the greater the magnitude of radial variation in ρ, principally in the medium zoneof the trunk. The spatial variation of wood stiffness seems to be sensitive to two environmentalconditions. The MFA radial decreases were more pronounced where the wind speed was higher.At the base and top of the trees, however, there was no significant effect of growing conditionson the radial variation of the wood properties considered here.
ISSN: 0931-1890

hal-01451896
https://hal.archives-ouvertes.fr/hal-01451896
https://hal.archives-ouvertes.fr/hal-01451896/document
https://hal.archives-ouvertes.fr/hal-01451896/file/Art_Gril_al_Spatial_variation_wood_density_2016.pdf
DOI : 10.1007/s00468-015-1327-8

Éditeur(s) : HAL CCSD American Chemical Society
Résumé : Three new monoterpene indole alkaloids (13) have been isolated from the bark of Geissospermum laeve-, together with the known alkaloids (-)-leuconolam (4), geissolosimine (5), and geissospermine (6). The structures of 1-3 were elucidated by analysis of their HRMS and NMR spectroscopic data. The absolute configuration of geissolaevine (I). was deduced from the comparison of experimental and theoretically calculated ECD spectra. The isolation workflow was guided by a molecular networking-based dereplication strategy using an in-house database of monoterpene indole alkaloids. In addition, five known compounds previously undescribed in the Geissospermum genus were dereplicated from the G. laeve alkaloid extract network and were assigned with various levels of identification confidence. The antiparasitic activities against Plasmodium falciparum and Leishmania donovani as well as the Ortotoxic activity against the MRC-5 cell line were determined for compounds 1-5.
ISSN: 0163-3864

hal-01605065
https://hal.archives-ouvertes.fr/hal-01605065
DOI : 10.1021/acs.jnatprod.6b01013
PRODINRA : 402605
PUBMED : 28282127

Éditeur(s) : HAL CCSD ACS American Chemical Society - Publications
Résumé : International audience
ABSTRACT: In this paper, the structural, optical and thermal properties of n-type (100),p-type (100) and (111) mesoporous silicon (MePSi) are reported. The mesoporous silicon wasprepared by an electrochemical process from bulk silicon wafer. Depending on the etchingdepth, analyses show that the porosity of p-type (111) increased by 32 to 40% compared to p(100) which, in turn, increased by 22 to 48% compared to n-type (100). The structuremorphology and the abundance of Si-Ox and Si-Hy also depended heavily on the type andcrystal orientation of MePSi. The thermal properties of the MePSi layers such as thermalconductivity (κ), volumetric heat capacity (ρCp) and thermal contact resistance (Rth) weredetermined using the pulsed photothermal method. The thermal conductivity of bulk silicondropped sharply after etching, decreasing by more than twenty-fold in the case of n-type (100)and by over forty-five fold for p-type (100) and (111). According to the percolation modeldepending on both porosity and phonon confinement, the drop in thermal conductivity wasmainly due to the nanostructure formation after etching. Thermal investigations showed thatthe volumetric heat capacity (ρCp) followed the barycentric model which depends mainly onthe porosity. The thermal contact resistances of MePSi layers were estimated to be in therange of 1x10-8 to 1x10-7 K⋅m2⋅W-1.
The Journal of Physical Chemistry C

hal-01495490
https://hal.archives-ouvertes.fr/hal-01495490
DOI : 10.1021/acs.jpcc.6b13101

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
The effect of trace concentrations of Ti on the rate and mechanism of hydrogen diffusion in pure forsterite was investigated experimentally. Forsterite doped with 350–400 ppm Ti (predominantly octahedral Ti3+, minor tetrahedral Ti4+) was prepared by diffusing Ti into pure synthetic forsterite at high temperature (1500 °C), very low oxygen fugacity (~QFM-5) at atmospheric pressure. The Ti-doped forsterite was then diffusively hydroxylated in a piston-cylinder apparatus at much lower temperatures (650–1000 °C) and higher oxygen fugacities, at 1.5–2.5 GPa, with chemical activities buffered by forsterite-enstatite or forsterite-periclase and partial pressure of H2O equal to total pressure. This produced hydrogen concentration-distance profiles of several hundred micrometers in length. Diffusion of hydrogen through the Ti-doped forsterite, even at very high Embedded Image , does not lead to redox re-equilibration of the high Ti3+/ΣTi ratio set during the synthesis of the starting material at extremely reducing conditions—the metastable point defects are partially preserved.Three main hydroxylated point defects are observed; hydroxyl is associated with Ti4+ (titano-clinohumite point defects), Ti3+ (and possibly other trivalent cations), and M-site vacancies. Concentration-distance profiles represent an interplay between diffusion and reaction (i.e., site rearrangement) to form the observed point defects. In all experiments, the concentration-distance profiles of the hydroxylated Ti defects coincide with the concentration-distance profiles of the M-site vacancy substitution, with the same crystallographic anisotropy. This suggests that the macroscopic movement of hydrogen through the crystal is due to one diffusion mechanism (the diffusion of hydroxylated M-site vacancies). The net H diffusion coefficient [logD(ΣH)], between 650–1000 °C, is Embedded Image where the values of logD0(ΣH) parallel to [100] and [001] directions are −3.0 ± 0.4 and −2.2 ± 0.4, respectively; diffusion is therefore around one order of magnitude faster along the c axis than along the a axis. The diffusion of hydrogen is slightly faster in Ti-doped forsterite than in pure forsterite. There is no effect of chemical activity or oxygen fugacity on the rate of diffusion. Hydrogen diffusion profiles represent a complex interplay between the movement of H through the crystal lattice and point-defect reactions to maintain charge balance.
ISSN: 0003-004X

hal-01467402
https://hal.archives-ouvertes.fr/hal-01467402
DOI : 10.2138/am-2016-55681571