Éditeur(s) : HAL CCSD Society of Economic Geologists
Résumé : International audience
The ~8-Moz Sadiola Hill gold deposit is located in the Kédougou-Kénieba inlier, a window of deformed ca. 2200 to 2050 Ma rocks that crop out in eastern Senegal and western Mali. The geology of the inlier differs from other Paleoproterozoic granite-greenstone belts and sedimentary basins by the abundance of carbonate rocks. The Sadiola Hill gold deposit occurs within 3 km of the Senegal-Mali shear zone, and country rocks in the region have undergone polycyclic deformation. The lithostratigraphy of the open pit consists of impure limestones overlain by younger sequences of detrital sedimentary rocks, which include arenite, wacke, and siltstone. The sedimentary rocks have been subjected to regional greenschist-facies metamorphism and have been intruded by multiple generations of synkinematic, calc-alkaline stocks and dikes. The bulk of the ore is hosted within a N-S- to NNW-trending, 10- to 50-m-wide, brittle-ductile dilational shear zone defined as the Sadiola shear zone. Gold lodes also occur along an array of steep NNE-trending shear zones. Geometric and kinematic analyses indicate that the ore-hosting structures were undergoing sinistral displacement at the time of mineralization, locally defined as the D3s NNW-SSE-shortening event. Hydrothermal alteration is polyphase and includes an early high-temperature calc-silicate phase (i.e., porphyroblastic growth of actinolite-tremolite) followed by a potassic phase (i.e., biotite-calcite-quartz ± K-feldspar-tourmaline-actinolite) that was synchronous with ore mineral deposition. Paragenetic studies reveal a multistage ore development that includes an As-rich sulfide stage, followed by an Au-Sb stage. The ore is associated with a metal enrichment suite of Au-As-Sb ± Cu-Fe-W-Mo-Ag-Bi-Zn-Pb-Te. The Sadiola Hill deposit shares a similar relative timing and structural setting to that of other world-class orogenic gold systems in the West African craton (e.g., Ashanti, Loulo), with gold deposition occurring during a period of transcurrent tectonics, after the cessation of region-wide compressional deformation. The high-temperature paragenesis at Sadiola Hill is atypical of gold mineralization in the craton and indicates that the late Eburnean tectono-magmatic activity between ca. 2080 and 2060 Ma played an important role in the dynamics of hydrothermal fluid circulation along the Senegal-Mali shear zone.
ISSN: 0361-0128

hal-01583358
https://hal.archives-ouvertes.fr/hal-01583358
DOI : 10.2113/econgeo.112.1.23

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mongolia represents the northernmost area affected by the India–Asia collision, and it is actively deformed along transpressive belts closely associated with large-scale strike-slip faults. The active and past mantle flow beneath this region is, however, poorly known. In order to investigate deep mantle deformation beneath central Mongolia and its relation with the surrounding major structures such as the Siberian craton, the Gobi–Altay belt and the Baikal rift, a NS-trending profile of broadband seismic stations has been deployed in the summer 2003 from the southern Siberian craton to the Gobi–Altay range, crossing the entire Hangay dome. Mantle flow is deduced from the splitting of teleseismic shear waves such as SKS phases. In eastern Mongolia, the permanent station ULN in Ulaanbaatar reveals the presence of two anisotropic layers, the upper one being oriented NE–SW, close to the trend of lithospheric structures and the lower one NW–SE, close to the trend of Eurasia absolute plate motion. Along the NS profile in central Mongolia, seismic anisotropy deduced from SKS splitting reveals a homogeneous NW–SE trending structure, fully consistent with the observations made in the Altay–Sayan in western Mongolia. The observed delay times of 1.5 to more than 2.0 s favor consistent mantle flow over large mantle thicknesses. Since the lithosphere is less than 100 km thick beneath central Mongolia and since the observed fast directions are parallel to the trend of the lithospheric structures but also close to the trend of the absolute plate motion, we propose that both the lithosphere and the asthenosphere may join their anisotropic effects beneath central Mongolia to explain the large delay times. Although GPS vectors represent the instantaneous displacement of the Earth's surface and SKS splitting the time and vertical integration of finite strain at depth, we use the opportunity of the dense geodetic measurements available in this region to discuss the anisotropy pattern in term of present-day deformation. In the Eurasia-fixed reference frame, GPS and SKS both depict a similar trend beneath central Mongolia, suggesting a lithospheric block “escaping” toward the east that could orient olivine a-axes in the upper mantle, within a transpressive tectonic regime. A different behaviour is observed in western Mongolia: the GPS vectors trend NS, close to the regional compression direction, whereas the fast SKS directions trend EW, suggesting a tectonic regime close to a mode of axial shortening, generating the development of an EW-trending foliation at depth. We therefore propose that Mongolia is a place where active and frozen lithospheric deformation may add their effects, together with the sublithospheric flow. In the three sources of anisotropy inferred, a fundamental role is played by the Siberian craton that acted as an undeformable core of the continent through time: the frozen Paleozoic and Mesozoic structures wrap around the craton, building up the fast anisotropic direction pattern; the present-day sublithospheric flow induced by the plate motion is likely deflecting around its deep roots; finally, the present-day tectonic regime appears to be controlled by the presence of the craton to the north.
ISSN: 0012-821X

hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853/document
https://hal.archives-ouvertes.fr/hal-00407853/file/Barruol_SKS_Mongolia_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.07.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A network of continuous GPS stations has been installed in NW Iran since 2005 to complement the survey GPS network already existing in the region. We present the 1999-2009 GPS-derived velocity field for this region based on the continuous and survey-mode observations. The results confirm a right lateral slip of 7 +/- 1 mm/yr for the North Tabriz fault, in agreement with previous studies. This rate is consistent with earthquakes of magnitude 7-7.3 and recurrence times of 250-300 yr. The higher spatial coverage of the new network shows that deformation is localized in the vicinity of the Chalderan, south Gailatu-Siah Cheshmeh-Khoy fault and the North Tabriz fault. However the eastern end of the North Tabriz fault appears to cross Mount Bozgush rather than following its southern foothills. This new velocity field does not indicate the 8 mm/yr of NNE-SSW extension suggested earlier for the region, but rather shows lower extension of 1-2 +/- 1 mm/yr across the eastern segment of the North Tabriz fault and the Talesh. To the west, the Chalderan and the western North Tabriz fault segment act like pure strike slip faults without significant extension or compression. The denser network in the Rudbar earthquake region (Ms 7.3, 1992) shows no significant motion across the fault, suggesting that the recurrence time of earthquakes like the Rudbar event must be very long. The lack of substantial compressive strain and the sharp azimuth change of the velocity vectors in the transition zone from Arabia to Lesser Caucasus motion imply that processes other than "extrusion", possibly related to old subduction or delamination, contribute to active deformation.
ISSN: 0012-821X

hal-00617666
https://hal.archives-ouvertes.fr/hal-00617666
DOI : 10.1016/j.epsl.2011.04.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyzes the active tectonics within the northwestern and southeastern extensions of the Pambak-Sevan-Syunik fault (PSSF), a major right-lateral strike-slip fault cutting through Armenia. Quantifying the deformations in terms of geometry, kinematics, slip rates and earthquake activity, using cosmogenic 3He, OSL/IRSL and radiocarbon dating techniques, reveal different behaviors between the two regions. Within the northwestern extension, in the region of Amasia, the PSSF bends to the west and splits into two main WNW–ESE trending reverse faults defining a compressional pop-up structure. We estimate an uplift rate and a shortening rate of 0.5 ± 0.1 mm/y and 1.4 ± 0.6 mm/y, respectively. This suggests that most of the ∼2 mm/y right lateral movement of the PSSF seems to be absorbed within the Amasia pop-structure. Within the southeastern extension, the PSSF shows signs of dying out within the Tsghuk Volcano region at the southernmost tip of the Syunik graben. There, the tectonic activity is characterized by a very slow NS trending normal faulting associated with a slight right-lateral movement. Slip rates analyses (i.e. vertical slip rate, EW stretching rate at 90° to the fault, and right-lateral slip rate of ∼0.2 mm/y, ∼0.1 mm/y and ∼0.05 mm/y, respectively) lead to the conclusion that the right lateral movement observed further north along the PSSF is mainly transferred within other active faults further west within the Karabagh (Hagari fault or other structures further northwestwards). Comparing our slip rates with those estimated from GPS data suggests that most of the deformation is localized and seismic, at least within the Tsghuk region. The geometrical and kinematic pattern observed within the two terminations of the PSSF suggests that the fault and its surrounding crustal blocks are presently rotating anticlockwise, as also observed within the GPS velocity field. This is consistent with the recent kinematic models proposed for the Caucasus-Kura-South Caspian region and brings a new insight into the present geodynamics of Armenia.
ISSN: 1040-6182

hal-01307342
https://hal.archives-ouvertes.fr/hal-01307342
DOI : 10.1016/j.quaint.2015.05.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : We studied the evolution of the microstructure of ice-Ih during static recrystallization by stepwise annealing experiments. We alternated thermal annealing and electron backscatter diffraction (EBSD) analyses on polycrystalline columnar ice pre-deformed in uniaxial compression at temperature of −7 °C to macroscopic strains of 3.0–5.2. Annealing experiments were carried out at −5 °C and −2 °C up to a maximum of 3.25 days, typically in 5–6 steps. EBSD crystal orientation maps obtained after each annealing step permit the description of microstructural changes. Decrease in average intragranular misorientation at the sample scale and modification of the misorientation across subgrain boundaries provide evidence for recovery from the earliest stages of annealing. This initial evolution is similar for all studied samples irrespective of their initial strain or annealing temperature. After an incubation period ≥1.5 h, recovery is accompanied by recrystallization (nucleation and grain boundary migration). Grain growth proceeds at the expense of domains with high intragranular misorientations, consuming first the most misorientated parts of primary grains. Grain growth kinetics fits the parabolic growth law with grain growth exponents in the range of 2.4–4.0. Deformation-induced tilt boundaries and kink bands may slow down grain boundary migration. They are stable features during early stages of static recrystallization, only erased by normal growth, which starts after >24 h of annealing.
ISSN: 0191-8141

hal-01685644
https://hal.archives-ouvertes.fr/hal-01685644
DOI : 10.1016/j.jsg.2017.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The El Oro metamorphic province of SW Ecuador is a composite massif made of juxtaposed terranes of both continental and oceanic affinity that has been located in a fore-arc position since Late Paleozoic times. Various geochemical, geochronological, and metamorphic studies have been undertaken on the El Oro metamorphic province, providing an understanding of the origin and age of the distinct units. However, the internal structures and geodynamic evolution of this area remain poorly understood. Our structural analysis and thermal modeling in the El Oro metamorphic province show that this fore-arc zone underwent four main geological events. (1) During Triassic times (230–225 Ma), the emplacement of the Piedras gabbroic unit at crustal-root level (~9 kbar) triggered partial melting of the metasedimentary sequence under an E-W extensional regime at pressure-temperature conditions ranging from 4.5 to 8.5 kbar and from 650 to 900°C for the migmatitic unit. (2) At 226 Ma, the tectonic underplating of the Arenillas-Panupalí oceanic unit (9 kbar and 300°C) thermally sealed the fore-arc region. (3) Around the Jurassic-Cretaceous boundary, the shift from trench-normal to trench-parallel subduction triggered the exhumation and underplating of the high-pressure, oceanic Raspas Ophiolitic Complex (18 kbar and 600°C) beneath the El Oro Group (130–120 Ma). This was followed by the opening of a NE-SW pull-apart basin, which tilted the massif along an E-W subhorizontal axis (110 Ma). (4) In Late Cretaceous times, an N-S compressional event generated heterogeneous deformation due to the presence of the Cretaceous Celica volcanic arc, which acted as a buttress and predominantly affected the central and eastern part of the massif.
ISSN: 0278-7407

hal-01115714
https://hal.archives-ouvertes.fr/hal-01115714
DOI : 10.1002/2014TC003618

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
In this paper we present and discuss new investigations performed on both the magmatic basement and the sedimentary formations of La Désirade. We report structural and sedimentary evidences for several episodes of deformation and displacement occurring prior to the present day tectonics. The main faults, respectively N130 ± 10°, N040 ± 10° and N090 ± 10°, previously considered as marker of the current tectonic regime corresponds to reactivated tectonic structures developed first during late Cretaceous compression and second during Pliocene to early Pleistocene extension. We demonstrate also the importance of late Pliocene-early Pleistocene and middle-late Pleistocene vertical movements in this part of the Lesser Antilles fore-arc as well as the role of compressive tectonics in the over thickened character of the arc basement in the Guadeloupe archipelago
EISSN: 1777-5817

hal-00830329
https://hal.archives-ouvertes.fr/hal-00830329
DOI : 10.2113/gssgfbull.184.1-2.21

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.
ISSN: 0264-8172

insu-00401683
https://hal-insu.archives-ouvertes.fr/insu-00401683
DOI : 10.1016/j.marpetgeo.2007.11.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Taylor & Francis: STM Behavioural Science and Public Health Titles Taylor & Francis: STM, Behavioural Science and Public Health Titles
Résumé : We have investigated by electron tomography, in a transmission electronic microscope, the interactions between dislocations in olivine single crystals and polycrystals deformed in axial compression at T < 1000 °C (T < 0.5Tm). Dislocations are mostly of the [0 0 1] type, except in the polycrystal where [1 0 0] and [0 0 1] dislocations have been activated. A few 〈1 0 1〉 junctions have been found and characterized. Many collinear interactions have been identified either involving direct interactions between crossing dislocations of opposite Burgers vectors or indirect interactions between dislocations gliding in parallel planes and sessile dislocation loops. We suggest that collinear interaction, already identified as the primary source of strain hardening in FCC metals, is the main dislocation interaction mechanism in olivine deformed at temperatures below 1000 °C.
ISSN: 1478-6443

hal-01174166
https://hal.archives-ouvertes.fr/hal-01174166
DOI : 10.1080/14786435.2014.1000996

Éditeur(s) : AGU
Résumé : New, high-quality multichannel seismic reflection data from the western New Caledonia offshore domain allow for the first time the direct, continuous connection of seismic reflectors between the Deep Sea Drilling Project 208 drill hole on the Lord Howe Rise and the New Caledonia Basin. A novel seismic interpretation is hence proposed for the northern New Caledonia Basin stratigraphy, which places the Eocene/Oligocene unconformity deeper than previously thought and revisits the actual thickness of the pre-Oligocene sequences. A causal link is proposed between the obduction of the South Loyalty Basin over New Caledonia (NC) and the tectonic history of the northern New Caledonia Basin. Here it is suggested that as the South Loyalty Basin was being obducted during early Oligocene times, the NC Basin subsided under the effect of the overloading and underthrusted to accommodate the compressional deformation, which resulted in (1) the uplift of the northern Fairway Ridge and (2) the sinking of the western flank of New Caledonia. This event also had repercussions farther west with the incipient subsidence of the Lord Howe Rise.
Tectonics (0278-7407) (AGU), 2008-12 , Vol. 27 , N. TC6006 , P. 1-20

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-4782.pdf
DOI:10.1029/2008TC002263
http://archimer.ifremer.fr/doc/00000/4782/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome-like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The 206Pb/238U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re-heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma-rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.
ISSN: 0263-4929

hal-01468009
https://hal.archives-ouvertes.fr/hal-01468009
DOI : 10.1111/jmg.12214

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Paleostress orientations were calculated from fault populations at 24 sites along the SW-NE segment and five sites along the E-W. Yasin segment of the Karakoram-Kohistan Suture Zone in NW Pakistan They demonstrate the importance of combined thrusting and strike-slip faulting. However, several paleostress tensor directions are distinguished, a dominant NW-SE compression and a minor E-W compression are compatible with the recent evolution of this part of the Hindu Kush. From the lack of both systematic overprinting-relationships and spatial trend (the two tensors were obtained at different locations) we conclude that in each location any of these two shortening directions can dominate Heterogeneously distributed extension is found in some places and is likely due to local conditions These paleostress tensors substantiate a transpressional regime due to far-field Himalayan compression and document the long-term background of the seismogenic deformation in this region.
ISSN: 0743-9547

hal-00496459
https://hal.archives-ouvertes.fr/hal-00496459
DOI : 10.1016/j.jseaes.2010.01.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Large-scale periodic undulations within the oceanic and continental lithospheres revealed by a number of observations, are often treated as compressive instabilities, i.e. lithospheric buckling or folding. These undulations are normally associated with intensive faulting, which raises questions on the role of faulting in the folding process, and even on the possibility of folding in highly faulted media. In this study, we demonstrate that folding can "survive" faulting and that both processes may develop concurrently, so that faulting may serve as a mechanism of folding in the brittle domain. We support this hypothesis by direct numerical modeling. The results are compared with the data on three most prominent and well-known cases of the oceanic and continental folding-like deformation ("Indian Ocean" type, "Western Gobi (central Asia)" type and "Central Australian" type). We demonstrate that under reasonable tectonic stresses, folds can develop from faults cutting through the brittle parts of the lithosphere. The predicted wavelengths and nite growth rates are in agreement with the observations. We also show that within a continental lithosphere with thermotectonic age greater than 400 My, either a bi-harmonic mode (two superimposed wavelengths, crustal and mantle one) or a coupled mode (mono-layer deformation) of inelastic folding can develop, depending on the strength and thickness of the lower crust.
ISSN: 0094-8276

ird-00388016
http://hal.ird.fr/ird-00388016
http://hal.ird.fr/ird-00388016/document
http://hal.ird.fr/ird-00388016/file/fig3.pdf
http://hal.ird.fr/ird-00388016/file/fig1.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004